
| RFC1155-SMI | RFC1213-MIB | RFC-1212 |
| Gauge | transmission | DisplayString |
| OBJECT-TYPE |
| ds1 | 1.3.6.1.2.1.10.18 | ||
| OBJECT IDENTIFIER | |||
| dsx1ConfigTable | 1.3.6.1.2.1.10.18.6 | ||
| The DS1 Configuration table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1ConfigEntry | |||
| dsx1ConfigEntry | 1.3.6.1.2.1.10.18.6.1 | ||
| An entry in the DS1 Configuration table. | |||
| OBJECT-TYPE | |||
| Dsx1ConfigEntry | |||
| dsx1LineIndex | 1.3.6.1.2.1.10.18.6.1.1 | ||
| This object is the identifier of a DS1 Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1IfIndex | 1.3.6.1.2.1.10.18.6.1.2 | ||
| This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1TimeElapsed | 1.3.6.1.2.1.10.18.6.1.3 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..899 | ||
| dsx1ValidIntervals | 1.3.6.1.2.1.10.18.6.1.4 | ||
| The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..96 | ||
| dsx1LineType | 1.3.6.1.2.1.10.18.6.1.5 | ||
| This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 dsx1D4 AT&T D4 format DS1 dsx1E1 CCITT Recommendation G.704 (Table 4a) dsx1E1-CRC CCITT Recommendation G.704 (Table 4b) dsxE1-MF G.704 (Table 4a) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 4b) with TS16 multiframing enabled | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1-CRC(5), dsx1E1-MF(6), dsx1E1-CRC-MF(7) | ||
| dsx1LineCoding | 1.3.6.1.2.1.10.18.6.1.6 | ||
| This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse every 8 bit periods is literal- ly implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data. dsx1B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data. | |||
| OBJECT-TYPE | |||
| INTEGER | dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1ZBTSI(4), dsx1AMI(5), other(6) | ||
| dsx1SendCode | 1.3.6.1.2.1.10.18.6.1.7 | ||
| This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern dsx1Send511Pattern sending a 511 bit fixed test pattern dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 dsx1SendOtherTestPattern sending a test pattern other than those described by this object | |||
| OBJECT-TYPE | |||
| INTEGER | dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) | ||
| dsx1CircuitIdentifier | 1.3.6.1.2.1.10.18.6.1.8 | ||
| This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| dsx1LoopbackConfig | 1.3.6.1.2.1.10.18.6.1.9 | ||
| This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here. | |||
| OBJECT-TYPE | |||
| INTEGER | dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4) | ||
| dsx1LineStatus | 1.3.6.1.2.1.10.18.6.1.10 | ||
| This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm should be set if and only if no other flag is set. If the dsx1LoopbackState bit is set, the loopback in ef- fect can be determined from the dsx1LoopbackConfig object. The various bit positions are: 1 dsx1NoAlarm No Alarm Present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF Indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsx1LossOfSignal Near end Loss Of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 dsx1RcvTestCode Near End detects a test code 4096 dsx1OtherFailure any line status not defined here | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8191 | ||
| dsx1SignalMode | 1.3.6.1.2.1.10.18.6.1.11 | ||
| 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a T1. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), robbedBit(2), bitOriented(3), messageOriented(4) | ||
| dsx1TransmitClockSource | 1.3.6.1.2.1.10.18.6.1.12 | ||
| The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock. | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), throughTiming(3) | ||
| dsx1Fdl | 1.3.6.1.2.1.10.18.6.1.13 | ||
| This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) | ||
| dsx1CurrentTable | 1.3.6.1.2.1.10.18.7 | ||
| The DS1 Current table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1CurrentEntry | |||
| dsx1CurrentEntry | 1.3.6.1.2.1.10.18.7.1 | ||
| An entry in the DS1 Current table. | |||
| OBJECT-TYPE | |||
| Dsx1CurrentEntry | |||
| dsx1CurrentIndex | 1.3.6.1.2.1.10.18.7.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1CurrentESs | 1.3.6.1.2.1.10.18.7.1.2 | ||
| The number of Errored Seconds, encountered by a DS1 interface in the current 15 minute inter- val. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentSESs | 1.3.6.1.2.1.10.18.7.1.3 | ||
| The number of Severely Errored Seconds encoun- tered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentSEFSs | 1.3.6.1.2.1.10.18.7.1.4 | ||
| The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentUASs | 1.3.6.1.2.1.10.18.7.1.5 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentCSSs | 1.3.6.1.2.1.10.18.7.1.6 | ||
| The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentPCVs | 1.3.6.1.2.1.10.18.7.1.7 | ||
| The number of Path Coding Violations encoun- tered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentLESs | 1.3.6.1.2.1.10.18.7.1.8 | ||
| The number of Line Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentBESs | 1.3.6.1.2.1.10.18.7.1.9 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentDMs | 1.3.6.1.2.1.10.18.7.1.10 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1CurrentLCVs | 1.3.6.1.2.1.10.18.7.1.11 | ||
| The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalTable | 1.3.6.1.2.1.10.18.8 | ||
| The DS1 Interval table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1IntervalEntry | |||
| dsx1IntervalEntry | 1.3.6.1.2.1.10.18.8.1 | ||
| An entry in the DS1 Interval table. | |||
| OBJECT-TYPE | |||
| Dsx1IntervalEntry | |||
| dsx1IntervalIndex | 1.3.6.1.2.1.10.18.8.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1IntervalNumber | 1.3.6.1.2.1.10.18.8.1.2 | ||
| A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..96 | ||
| dsx1IntervalESs | 1.3.6.1.2.1.10.18.8.1.3 | ||
| The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalSESs | 1.3.6.1.2.1.10.18.8.1.4 | ||
| The number of Severely Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalSEFSs | 1.3.6.1.2.1.10.18.8.1.5 | ||
| The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalUASs | 1.3.6.1.2.1.10.18.8.1.6 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalCSSs | 1.3.6.1.2.1.10.18.8.1.7 | ||
| The number of Controlled Slip Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalPCVs | 1.3.6.1.2.1.10.18.8.1.8 | ||
| The number of Path Coding Violations encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalLESs | 1.3.6.1.2.1.10.18.8.1.9 | ||
| The number of Line Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalBESs | 1.3.6.1.2.1.10.18.8.1.10 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalDMs | 1.3.6.1.2.1.10.18.8.1.11 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1IntervalLCVs | 1.3.6.1.2.1.10.18.8.1.12 | ||
| The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalTable | 1.3.6.1.2.1.10.18.9 | ||
| The DS1 Total table. 24 hour interval. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1TotalEntry | |||
| dsx1TotalEntry | 1.3.6.1.2.1.10.18.9.1 | ||
| An entry in the DS1 Total table. | |||
| OBJECT-TYPE | |||
| Dsx1TotalEntry | |||
| dsx1TotalIndex | 1.3.6.1.2.1.10.18.9.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1TotalESs | 1.3.6.1.2.1.10.18.9.1.2 | ||
| The number of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalSESs | 1.3.6.1.2.1.10.18.9.1.3 | ||
| The number of Severely Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalSEFSs | 1.3.6.1.2.1.10.18.9.1.4 | ||
| The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalUASs | 1.3.6.1.2.1.10.18.9.1.5 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalCSSs | 1.3.6.1.2.1.10.18.9.1.6 | ||
| The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalPCVs | 1.3.6.1.2.1.10.18.9.1.7 | ||
| The number of Path Coding Violations encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalLESs | 1.3.6.1.2.1.10.18.9.1.8 | ||
| The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalBESs | 1.3.6.1.2.1.10.18.9.1.9 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalDMs | 1.3.6.1.2.1.10.18.9.1.10 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1TotalLCVs | 1.3.6.1.2.1.10.18.9.1.11 | ||
| The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentTable | 1.3.6.1.2.1.10.18.10 | ||
| The DS1 Far End Current table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1FarEndCurrentEntry | |||
| dsx1FarEndCurrentEntry | 1.3.6.1.2.1.10.18.10.1 | ||
| An entry in the DS1 Far End Current table. | |||
| OBJECT-TYPE | |||
| Dsx1FarEndCurrentEntry | |||
| dsx1FarEndCurrentIndex | 1.3.6.1.2.1.10.18.10.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1FarEndTimeElapsed | 1.3.6.1.2.1.10.18.10.1.2 | ||
| The number of seconds that have elapsed since the beginning of the far end current error-measurement period. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..899 | ||
| dsx1FarEndValidIntervals | 1.3.6.1.2.1.10.18.10.1.3 | ||
| The number of previous far end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..96 | ||
| dsx1FarEndCurrentESs | 1.3.6.1.2.1.10.18.10.1.4 | ||
| The number of Far Far End Errored Seconds en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentSESs | 1.3.6.1.2.1.10.18.10.1.5 | ||
| The number of Far End Severely Errored Seconds encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentSEFSs | 1.3.6.1.2.1.10.18.10.1.6 | ||
| The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentUASs | 1.3.6.1.2.1.10.18.10.1.7 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentCSSs | 1.3.6.1.2.1.10.18.10.1.8 | ||
| The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentLESs | 1.3.6.1.2.1.10.18.10.1.9 | ||
| The number of Far End Line Errored Seconds en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentPCVs | 1.3.6.1.2.1.10.18.10.1.10 | ||
| The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentBESs | 1.3.6.1.2.1.10.18.10.1.11 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndCurrentDMs | 1.3.6.1.2.1.10.18.10.1.12 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the current 15 minute interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalTable | 1.3.6.1.2.1.10.18.11 | ||
| The DS1 Far End Interval table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1FarEndIntervalEntry | |||
| dsx1FarEndIntervalEntry | 1.3.6.1.2.1.10.18.11.1 | ||
| An entry in the DS1 Far End Interval table. | |||
| OBJECT-TYPE | |||
| Dsx1FarEndIntervalEntry | |||
| dsx1FarEndIntervalIndex | 1.3.6.1.2.1.10.18.11.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1FarEndIntervalNumber | 1.3.6.1.2.1.10.18.11.1.2 | ||
| A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..96 | ||
| dsx1FarEndIntervalESs | 1.3.6.1.2.1.10.18.11.1.3 | ||
| The number of Far End Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalSESs | 1.3.6.1.2.1.10.18.11.1.4 | ||
| The number of Far End Severely Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalSEFSs | 1.3.6.1.2.1.10.18.11.1.5 | ||
| The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, in- tervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalUASs | 1.3.6.1.2.1.10.18.11.1.6 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalCSSs | 1.3.6.1.2.1.10.18.11.1.7 | ||
| The number of Far End Controlled Slip Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalLESs | 1.3.6.1.2.1.10.18.11.1.8 | ||
| The number of Far End Line Errored Seconds en- countered by a DS1 interface in one of the pre- vious 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalPCVs | 1.3.6.1.2.1.10.18.11.1.9 | ||
| The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in one of the pre- vious 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalBESs | 1.3.6.1.2.1.10.18.11.1.10 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndIntervalDMs | 1.3.6.1.2.1.10.18.11.1.11 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalTable | 1.3.6.1.2.1.10.18.12 | ||
| The DS1 Far End Total table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1FarEndTotalEntry | |||
| dsx1FarEndTotalEntry | 1.3.6.1.2.1.10.18.12.1 | ||
| An entry in the DS1 Far End Total table. | |||
| OBJECT-TYPE | |||
| Dsx1FarEndTotalEntry | |||
| dsx1FarEndTotalIndex | 1.3.6.1.2.1.10.18.12.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1FarEndTotalESs | 1.3.6.1.2.1.10.18.12.1.2 | ||
| The number of Far End Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalSESs | 1.3.6.1.2.1.10.18.12.1.3 | ||
| The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalSEFSs | 1.3.6.1.2.1.10.18.12.1.4 | ||
| The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalUASs | 1.3.6.1.2.1.10.18.12.1.5 | ||
| The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalCSSs | 1.3.6.1.2.1.10.18.12.1.6 | ||
| The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalLESs | 1.3.6.1.2.1.10.18.12.1.7 | ||
| The number of Far End Line Errored Seconds en- countered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalPCVs | 1.3.6.1.2.1.10.18.12.1.8 | ||
| The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalBESs | 1.3.6.1.2.1.10.18.12.1.9 | ||
| The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FarEndTotalDMs | 1.3.6.1.2.1.10.18.12.1.10 | ||
| The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the previous 24 hour interval. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| dsx1FracTable | 1.3.6.1.2.1.10.18.13 | ||
| The DS1 Fractional table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsx1FracEntry | |||
| dsx1FracEntry | 1.3.6.1.2.1.10.18.13.1 | ||
| An entry in the DS1 Fractional table. | |||
| OBJECT-TYPE | |||
| Dsx1FracEntry | |||
| dsx1FracIndex | 1.3.6.1.2.1.10.18.13.1.1 | ||
| The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| dsx1FracNumber | 1.3.6.1.2.1.10.18.13.1.2 | ||
| The channel number for this entry. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..31 | ||
| dsx1FracIfIndex | 1.3.6.1.2.1.10.18.13.1.3 | ||
| An index value that uniquely identifies an in- terface. The interface identified by a partic- ular value of this index is the same interface as identified by the same value an ifIndex ob- ject instance. If no interface is currently us- ing a channel, the value should be zero. If a single interface occupies more than one time slot, that ifIndex value will be found in mul- tiple time slots. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..'7fffffff'h | ||
| Dsx1ConfigEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1LineIndex | |||
| INTEGER as dsx1IfIndex | |||
| INTEGER as dsx1TimeElapsed | |||
| INTEGER as dsx1ValidIntervals | |||
| INTEGER as dsx1LineType | |||
| INTEGER as dsx1LineCoding | |||
| INTEGER as dsx1SendCode | |||
| DisplayString as dsx1CircuitIdentifier | |||
| INTEGER as dsx1LoopbackConfig | |||
| INTEGER as dsx1LineStatus | |||
| INTEGER as dsx1SignalMode | |||
| INTEGER as dsx1TransmitClockSource | |||
| INTEGER as dsx1Fdl | |||
| Dsx1CurrentEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1CurrentIndex | |||
| Gauge as dsx1CurrentESs | |||
| Gauge as dsx1CurrentSESs | |||
| Gauge as dsx1CurrentSEFSs | |||
| Gauge as dsx1CurrentUASs | |||
| Gauge as dsx1CurrentCSSs | |||
| Gauge as dsx1CurrentPCVs | |||
| Gauge as dsx1CurrentLESs | |||
| Gauge as dsx1CurrentBESs | |||
| Gauge as dsx1CurrentDMs | |||
| Gauge as dsx1CurrentLCVs | |||
| Dsx1IntervalEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1IntervalIndex | |||
| INTEGER as dsx1IntervalNumber | |||
| Gauge as dsx1IntervalESs | |||
| Gauge as dsx1IntervalSESs | |||
| Gauge as dsx1IntervalSEFSs | |||
| Gauge as dsx1IntervalUASs | |||
| Gauge as dsx1IntervalCSSs | |||
| Gauge as dsx1IntervalPCVs | |||
| Gauge as dsx1IntervalLESs | |||
| Gauge as dsx1IntervalBESs | |||
| Gauge as dsx1IntervalDMs | |||
| Gauge as dsx1IntervalLCVs | |||
| Dsx1TotalEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1TotalIndex | |||
| Gauge as dsx1TotalESs | |||
| Gauge as dsx1TotalSESs | |||
| Gauge as dsx1TotalSEFSs | |||
| Gauge as dsx1TotalUASs | |||
| Gauge as dsx1TotalCSSs | |||
| Gauge as dsx1TotalPCVs | |||
| Gauge as dsx1TotalLESs | |||
| Gauge as dsx1TotalBESs | |||
| Gauge as dsx1TotalDMs | |||
| Gauge as dsx1TotalLCVs | |||
| Dsx1FarEndCurrentEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1FarEndCurrentIndex | |||
| INTEGER as dsx1FarEndTimeElapsed | |||
| INTEGER as dsx1FarEndValidIntervals | |||
| Gauge as dsx1FarEndCurrentESs | |||
| Gauge as dsx1FarEndCurrentSESs | |||
| Gauge as dsx1FarEndCurrentSEFSs | |||
| Gauge as dsx1FarEndCurrentUASs | |||
| Gauge as dsx1FarEndCurrentCSSs | |||
| Gauge as dsx1FarEndCurrentLESs | |||
| Gauge as dsx1FarEndCurrentPCVs | |||
| Gauge as dsx1FarEndCurrentBESs | |||
| Gauge as dsx1FarEndCurrentDMs | |||
| Dsx1FarEndIntervalEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1FarEndIntervalIndex | |||
| INTEGER as dsx1FarEndIntervalNumber | |||
| Gauge as dsx1FarEndIntervalESs | |||
| Gauge as dsx1FarEndIntervalSESs | |||
| Gauge as dsx1FarEndIntervalSEFSs | |||
| Gauge as dsx1FarEndIntervalUASs | |||
| Gauge as dsx1FarEndIntervalCSSs | |||
| Gauge as dsx1FarEndIntervalLESs | |||
| Gauge as dsx1FarEndIntervalPCVs | |||
| Gauge as dsx1FarEndIntervalBESs | |||
| Gauge as dsx1FarEndIntervalDMs | |||
| Dsx1FarEndTotalEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1FarEndTotalIndex | |||
| Gauge as dsx1FarEndTotalESs | |||
| Gauge as dsx1FarEndTotalSESs | |||
| Gauge as dsx1FarEndTotalSEFSs | |||
| Gauge as dsx1FarEndTotalUASs | |||
| Gauge as dsx1FarEndTotalCSSs | |||
| Gauge as dsx1FarEndTotalLESs | |||
| Gauge as dsx1FarEndTotalPCVs | |||
| Gauge as dsx1FarEndTotalBESs | |||
| Gauge as dsx1FarEndTotalDMs | |||
| Dsx1FracEntry | |||
| SEQUENCE | |||
| INTEGER as dsx1FracIndex | |||
| INTEGER as dsx1FracNumber | |||
| INTEGER as dsx1FracIfIndex | |||