RFC7777-MIB

File: RFC7777-MIB.mib (49277 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

IpAddress Counter Gauge
TimeTicks Opaque enterprises
OBJECT-TYPE DisplayString

Defined Objects

wellfleet 1.3.6.1.4.1.18
OBJECT IDENTIFIER    

wfOspfGeneralGroup 1.3.6.1.4.1.18.3.5.3.2.3.1
OBJECT IDENTIFIER    

wfOspfGeneralDelete 1.3.6.1.4.1.18.3.5.3.2.3.1.1
'This value determines whether OSPF is configured'
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfGeneralDisable 1.3.6.1.4.1.18.3.5.3.2.3.1.2
'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfGeneralState 1.3.6.1.4.1.18.3.5.3.2.3.1.3
'The state of OSPF'
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfOspfRouterId 1.3.6.1.4.1.18.3.5.3.2.3.1.4
'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.' REFERENCE 'OSPF Version 2, C.1 Global parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfVersionNumber 1.3.6.1.4.1.18.3.5.3.2.3.1.5
'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title'
OBJECT-TYPE    
  INTEGER  

wfOspfAreaBdrRtrStatus 1.3.6.1.4.1.18.3.5.3.2.3.1.6
'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas'
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfOspfASBdrRtrStatus 1.3.6.1.4.1.18.3.5.3.2.3.1.7
'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers'
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfOspfTOSSupport 1.3.6.1.4.1.18.3.5.3.2.3.1.8
'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support'
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfOspfSpfHoldDown 1.3.6.1.4.1.18.3.5.3.2.3.1.9
Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down.
OBJECT-TYPE    
  INTEGER defval(1), maximum(10)  

wfOspfSlotMask 1.3.6.1.4.1.18.3.5.3.2.3.1.10
Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
OBJECT-TYPE    
  INTEGER slotmask(4261150720)  

wfOspfAreaTable 1.3.6.1.4.1.18.3.5.3.2.3.2
-- The OSPF Area Data Structure contains information -- regarding the various areas. The interfaces and -- virtual links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'OSPF Version 2, Section 6 The Area Data Structure'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfAreaEntry

wfOspfAreaEntry 1.3.6.1.4.1.18.3.5.3.2.3.2.1
'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.'
OBJECT-TYPE    
  WfOspfAreaEntry  

wfOspfAreaDelete 1.3.6.1.4.1.18.3.5.3.2.3.2.1.1
This value determines if the OSPF router is configured with this area.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfAreaDisable 1.3.6.1.4.1.18.3.5.3.2.3.2.1.2
This value indicates the state of this area on the OSPF router.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfAreaState 1.3.6.1.4.1.18.3.5.3.2.3.2.1.3
This value indicates the state of the OSPF Area.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wfOspfAreaId 1.3.6.1.4.1.18.3.5.3.2.3.2.1.4
'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfAuthType 1.3.6.1.4.1.18.3.5.3.2.3.2.1.5
'The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.' REFERENCE 'OSPF Version 2, Appendix E Authentication' -- none (0), -- simplePassword (1) -- reserved for future specification (2..255) -- reserved for AS specific values (> 255)
OBJECT-TYPE    
  INTEGER nopassword(1), simplepassword(2)  

wfOspfImportASExtern 1.3.6.1.4.1.18.3.5.3.2.3.2.1.6
'The area's support for importing AS external link- state advertisements.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfOspfStubMetric 1.3.6.1.4.1.18.3.5.3.2.3.2.1.7
'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.'
OBJECT-TYPE    
  INTEGER minimum(1), maximum(16777215)  

wfOspfImportSum 1.3.6.1.4.1.18.3.5.3.2.3.2.1.8
'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE'
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfOspfSpfCnt 1.3.6.1.4.1.18.3.5.3.2.3.2.1.9
The number of times the OSPF SPF algorithm has been run for this area.
OBJECT-TYPE    
  Counter  

wfOspfLsdbTable 1.3.6.1.4.1.18.3.5.3.2.3.3
-- OSPF Link State Database -- The Link State Database contains the Link State -- Advertisements from throughout the areas that the -- device is attached to. 'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfLsdbEntry

wfOspfLsdbEntry 1.3.6.1.4.1.18.3.5.3.2.3.3.1
'A single Link State Advertisement.'
OBJECT-TYPE    
  WfOspfLsdbEntry  

wfOspfLsdbAreaId 1.3.6.1.4.1.18.3.5.3.2.3.3.1.1
'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfLsdbType 1.3.6.1.4.1.18.3.5.3.2.3.3.1.2
'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State Advertisement header' stubLink (0), routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5)
OBJECT-TYPE    
  INTEGER routerlink(1), networklink(2), summarylink(3), assummarylink(4), asexternallink(5)  

wfOspfLsdbLSID 1.3.6.1.4.1.18.3.5.3.2.3.3.1.3
'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.4 Link State ID'
OBJECT-TYPE    
  IpAddress  

wfOspfLsdbRouterId 1.3.6.1.4.1.18.3.5.3.2.3.3.1.4
'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfLsdbSequence 1.3.6.1.4.1.18.3.5.3.2.3.3.1.5
-- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. 'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.6 LS sequence number'
OBJECT-TYPE    
  INTEGER  

wfOspfLsdbAge 1.3.6.1.4.1.18.3.5.3.2.3.3.1.6
'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age'
OBJECT-TYPE    
  INTEGER lsdbmaxage(3600)  

wfOspfLsdbChecksum 1.3.6.1.4.1.18.3.5.3.2.3.3.1.7
'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.' REFERENCE 'OSPF Version 2, Section 12.1.7 LS checksum'
OBJECT-TYPE    
  INTEGER  

wfOspfLsdbAdvLen 1.3.6.1.4.1.18.3.5.3.2.3.3.1.8
'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'
OBJECT-TYPE    
  INTEGER  

wfOspfAreaRangeTable 1.3.6.1.4.1.18.3.5.3.2.3.4
'A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfAreaRangeEntry

wfOspfAreaRangeEntry 1.3.6.1.4.1.18.3.5.3.2.3.4.1
OBJECT-TYPE    
  WfOspfAreaRangeEntry  

wfOspfAreaRangeDelete 1.3.6.1.4.1.18.3.5.3.2.3.4.1.1
This value determines if an Area Range has been configured for the OSPF router.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfAreaRangeDisable 1.3.6.1.4.1.18.3.5.3.2.3.4.1.2
'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfAreaRangeState 1.3.6.1.4.1.18.3.5.3.2.3.4.1.3
The state of the OSPF Area Range.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wfOspfAreaRangeAreaID 1.3.6.1.4.1.18.3.5.3.2.3.4.1.4
'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfAreaRangeNet 1.3.6.1.4.1.18.3.5.3.2.3.4.1.5
'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfAreaRangeMask 1.3.6.1.4.1.18.3.5.3.2.3.4.1.6
'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'
OBJECT-TYPE    
  IpAddress  

wfOspfIfTable 1.3.6.1.4.1.18.3.5.3.2.3.5
-- OSPF Interface Table -- The OSPF Interface Table augments the ifTable with OSPF -- specific information. 'The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.' REFERENCE 'OSPF Version 2, Appendix C.3 Router interface parameters'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfIfEntry

wfOspfIfEntry 1.3.6.1.4.1.18.3.5.3.2.3.5.1
'The OSPF Interface Entry describes one interface from the viewpoint of OSPF.'
OBJECT-TYPE    
  WfOspfIfEntry  

wfOspfIfDelete 1.3.6.1.4.1.18.3.5.3.2.3.5.1.1
This variable determines in an OSPF Interface has been configured on the router.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfIfDisable 1.3.6.1.4.1.18.3.5.3.2.3.5.1.2
'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfIfState 1.3.6.1.4.1.18.3.5.3.2.3.5.1.3
'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7)
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointtopoint(4), designatedrouter(5), backupdesignatedrouter(6), otherdesignatedrouter(7)  

wfOspfIfIpAddress 1.3.6.1.4.1.18.3.5.3.2.3.5.1.4
'The IP address of this OSPF interface.'
OBJECT-TYPE    
  IpAddress  

wfOspfAddressLessIf 1.3.6.1.4.1.18.3.5.3.2.3.5.1.5
'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'
OBJECT-TYPE    
  INTEGER  

wfOspfIfAreaId 1.3.6.1.4.1.18.3.5.3.2.3.5.1.6
'A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.' default { '00000000'H } -- 0.0.0.0
OBJECT-TYPE    
  IpAddress  

wfOspfIfType 1.3.6.1.4.1.18.3.5.3.2.3.5.1.7
'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.' broadcast (1), nbma (2), pointToPoint (3)
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointtopoint(3)  

wfOspfIfRtrPriority 1.3.6.1.4.1.18.3.5.3.2.3.5.1.8
'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.'
OBJECT-TYPE    
  INTEGER defval(1), maximum(255)  

wfOspfIfTransitDelay 1.3.6.1.4.1.18.3.5.3.2.3.5.1.9
'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'
OBJECT-TYPE    
  INTEGER minimum(1), maximum(3600)  

wfOspfIfRetransInterval 1.3.6.1.4.1.18.3.5.3.2.3.5.1.10
'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(5), maximum(3600)  

wfOspfIfHelloInterval 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11
'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(10), maximum(65535)  

wfOspfIfRtrDeadInterval 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(40), maximum(2147483647)  

wfOspfIfPollInterval 1.3.6.1.4.1.18.3.5.3.2.3.5.1.13
'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(120), maximum(2147483647)  

wfOspfIfDesignatedRouter 1.3.6.1.4.1.18.3.5.3.2.3.5.1.14
'The IP Address of the Designated Router.' default { '00000000'H } -- 0.0.0.0
OBJECT-TYPE    
  IpAddress  

wfOspfIfBackupDesignatedRouter 1.3.6.1.4.1.18.3.5.3.2.3.5.1.15
'The IP Address of the Backup Designated Router.' default { '00000000'H } -- 0.0.0.0
OBJECT-TYPE    
  IpAddress  

wfOspfIfMetricCost 1.3.6.1.4.1.18.3.5.3.2.3.5.1.16
'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.'
OBJECT-TYPE    
  INTEGER minimum(1), maximum(65535)  

wfOspfIfAuthKey 1.3.6.1.4.1.18.3.5.3.2.3.5.1.17
'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.' default { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure'
OBJECT-TYPE    
  OCTET STRING  

wfOspfIfTxHellos 1.3.6.1.4.1.18.3.5.3.2.3.5.1.18
Number of OSPF Hello packets transmitted.
OBJECT-TYPE    
  Counter  

wfOspfIfTxDBDescripts 1.3.6.1.4.1.18.3.5.3.2.3.5.1.19
Number of OSPF DataBase Description packets transmitted.
OBJECT-TYPE    
  Counter  

wfOspfIfTxLinkStateReqs 1.3.6.1.4.1.18.3.5.3.2.3.5.1.20
Number of OSPF Link State Request packets transmitted.
OBJECT-TYPE    
  Counter  

wfOspfIfTxLinkStateUpds 1.3.6.1.4.1.18.3.5.3.2.3.5.1.21
Number of OSPF Link State Update packets transmitted.
OBJECT-TYPE    
  Counter  

wfOspfIfTxLinkStateAcks 1.3.6.1.4.1.18.3.5.3.2.3.5.1.22
Number of OSPF Link States Acknowledgements transmitted.
OBJECT-TYPE    
  Counter  

wfOspfIfRxHellos 1.3.6.1.4.1.18.3.5.3.2.3.5.1.23
Number of OSPF Hello packets received.
OBJECT-TYPE    
  Counter  

wfOspfIfRxDBDescripts 1.3.6.1.4.1.18.3.5.3.2.3.5.1.24
Number of OSPF DataBase Description packets received.
OBJECT-TYPE    
  Counter  

wfOspfIfRxLinkStateReqs 1.3.6.1.4.1.18.3.5.3.2.3.5.1.25
Number of OSPF Link State Requests received.
OBJECT-TYPE    
  Counter  

wfOspfIfRxLinkStateUpds 1.3.6.1.4.1.18.3.5.3.2.3.5.1.26
Number of OSPF Link State Updates received.
OBJECT-TYPE    
  Counter  

wfOspfIfRxLinkStateAcks 1.3.6.1.4.1.18.3.5.3.2.3.5.1.27
Number of OSPF Link State Acknowledgements received.
OBJECT-TYPE    
  Counter  

wfOspfIfDrops 1.3.6.1.4.1.18.3.5.3.2.3.5.1.28
Number of OSPF packets dropped because of invalid information in the packet.
OBJECT-TYPE    
  Counter  

wfOspfMtuSize 1.3.6.1.4.1.18.3.5.3.2.3.5.1.29
Configure MTU size per OSPF inreface
OBJECT-TYPE    
  INTEGER defval(1), min(2), maximum(10000)  

wfOspfVirtIfTable 1.3.6.1.4.1.18.3.5.3.2.3.6
-- OSPF Virtual Interface Table -- The Virtual Interface Table describes the virtual -- links that the OSPF Process is configured to -- carry on. 'Information about this router's virtual interfaces.' REFERENCE 'OSPF Version 2, Appendix C.4 Virtual link parameters'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfVirtIfEntry

wfOspfVirtIfEntry 1.3.6.1.4.1.18.3.5.3.2.3.6.1
'Information about a single Virtual Interface.'
OBJECT-TYPE    
  WfOspfVirtIfEntry  

wfOspfVirtIfDelete 1.3.6.1.4.1.18.3.5.3.2.3.6.1.1
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfVirtIfDisable 1.3.6.1.4.1.18.3.5.3.2.3.6.1.2
'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfVirtIfState 1.3.6.1.4.1.18.3.5.3.2.3.6.1.3
'OSPF virtual interface states.' down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable
OBJECT-TYPE    
  INTEGER down(1), pointtopoint(4)  

wfOspfVirtIfAreaID 1.3.6.1.4.1.18.3.5.3.2.3.6.1.4
'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0'
OBJECT-TYPE    
  IpAddress  

wfOspfVirtIfNeighbor 1.3.6.1.4.1.18.3.5.3.2.3.6.1.5
'The Router ID of the Virtual Neighbor.'
OBJECT-TYPE    
  IpAddress  

wfOspfVirtIfTransitDelay 1.3.6.1.4.1.18.3.5.3.2.3.6.1.6
'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'
OBJECT-TYPE    
  INTEGER minimum(1), maximum(3600)  

wfOspfVirtIfRetransInterval 1.3.6.1.4.1.18.3.5.3.2.3.6.1.7
'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(5), maximum(3600)  

wfOspfVirtIfHelloInterval 1.3.6.1.4.1.18.3.5.3.2.3.6.1.8
'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(15), maximum(65535)  

wfOspfVirtIfRtrDeadInterval 1.3.6.1.4.1.18.3.5.3.2.3.6.1.9
'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.'
OBJECT-TYPE    
  INTEGER minimum(1), defval(60), maximum(2147483647)  

wfOspfVirtIfAuthKey 1.3.6.1.4.1.18.3.5.3.2.3.6.1.10
'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.' REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure'
OBJECT-TYPE    
  OCTET STRING  

wfOspfVirtIfTxHellos 1.3.6.1.4.1.18.3.5.3.2.3.6.1.11
Number of OSPF Hello packets transmitted on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfTxDBDescripts 1.3.6.1.4.1.18.3.5.3.2.3.6.1.12
Number of OSPF DataBase Description packets transmitted on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfTxLinkStateReqs 1.3.6.1.4.1.18.3.5.3.2.3.6.1.13
Number of OSPF Link State Request packets transmitted on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfTxLinkStateUpds 1.3.6.1.4.1.18.3.5.3.2.3.6.1.14
Number of OSPF Link State Update packets transmitted on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfTxLinkStateAcks 1.3.6.1.4.1.18.3.5.3.2.3.6.1.15
Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfRxHellos 1.3.6.1.4.1.18.3.5.3.2.3.6.1.16
Number of OSPF Hello packets received on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfRxDBDescripts 1.3.6.1.4.1.18.3.5.3.2.3.6.1.17
Number of OSPF DataBase Description packets received on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfRxLinkStateReqs 1.3.6.1.4.1.18.3.5.3.2.3.6.1.18
Number of OSPF Link State Request packets recieved on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfRxLinkStateUpds 1.3.6.1.4.1.18.3.5.3.2.3.6.1.19
Number of OSPF Link State Update packets received on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfRxLinkStateAcks 1.3.6.1.4.1.18.3.5.3.2.3.6.1.20
Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfVirtIfDrops 1.3.6.1.4.1.18.3.5.3.2.3.6.1.21
Number of OSPF packets dropped on Virtual Interfaces.
OBJECT-TYPE    
  Counter  

wfOspfNbrTable 1.3.6.1.4.1.18.3.5.3.2.3.7
-- OSPF Neighbor Table -- The OSPF Neighbor Table describes all neighbors in -- the locality of the subject router. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfNbrEntry

wfOspfNbrEntry 1.3.6.1.4.1.18.3.5.3.2.3.7.1
'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
OBJECT-TYPE    
  WfOspfNbrEntry  

wfOspfNbrDelete 1.3.6.1.4.1.18.3.5.3.2.3.7.1.1
This variable indicates the existence of a static OSPF neighbor.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOspfNbrDisable 1.3.6.1.4.1.18.3.5.3.2.3.7.1.2
'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfOspfNbrState 1.3.6.1.4.1.18.3.5.3.2.3.7.1.3
'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)  

wfOspfNbrIpAddr 1.3.6.1.4.1.18.3.5.3.2.3.7.1.4
'The IP address of this neighbor.'
OBJECT-TYPE    
  IpAddress  

wfOspfNbrIfAddr 1.3.6.1.4.1.18.3.5.3.2.3.7.1.5
'The Interface IP address for this neighbor.'
OBJECT-TYPE    
  IpAddress  

wfOspfNbrAddressLessIndex 1.3.6.1.4.1.18.3.5.3.2.3.7.1.6
' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.'
OBJECT-TYPE    
  INTEGER  

wfOspfNbrRtrId 1.3.6.1.4.1.18.3.5.3.2.3.7.1.7
'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0
OBJECT-TYPE    
  IpAddress  

wfOspfNbrOptions 1.3.6.1.4.1.18.3.5.3.2.3.7.1.8
'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options'
OBJECT-TYPE    
  INTEGER  

wfOspfNbrPriority 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9
'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.'
OBJECT-TYPE    
  INTEGER defval(1), maximum(255)  

wfOspfNbrEvents 1.3.6.1.4.1.18.3.5.3.2.3.7.1.10
'The number of times this neighbor relationship has changed state, or an error has occurred.'
OBJECT-TYPE    
  Counter  

wfOspfNbrLSRetransQLen 1.3.6.1.4.1.18.3.5.3.2.3.7.1.11
'The current length of the retransmission queue.'
OBJECT-TYPE    
  Gauge  

wfOspfVirtNbrTable 1.3.6.1.4.1.18.3.5.3.2.3.8
-- WFOSPF Virtual Neighbor Table -- This table describes all virtual neighbors. -- Since Virtual Links are configured in the -- virtual interface table, this table is read-only. 'A table of virtual neighbor information.' REFERENCE 'OSPF Version 2, '
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfVirtNbrEntry

wfOspfVirtNbrEntry 1.3.6.1.4.1.18.3.5.3.2.3.8.1
'Virtual neighbor information.' REFERENCE 'OSPF Version 2, '
OBJECT-TYPE    
  WfOspfVirtNbrEntry  

wfOspfVirtNbrArea 1.3.6.1.4.1.18.3.5.3.2.3.8.1.1
'The Transit Area Identifier.'
OBJECT-TYPE    
  IpAddress  

wfOspfVirtNbrRtrId 1.3.6.1.4.1.18.3.5.3.2.3.8.1.2
'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.'
OBJECT-TYPE    
  IpAddress  

wfOspfVirtNbrIpAddr 1.3.6.1.4.1.18.3.5.3.2.3.8.1.3
'The IP address this Virtual Neighbor is using.'
OBJECT-TYPE    
  IpAddress  

wfOspfVirtNbrOptions 1.3.6.1.4.1.18.3.5.3.2.3.8.1.4
'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.'
OBJECT-TYPE    
  INTEGER  

wfOspfVirtNbrState 1.3.6.1.4.1.18.3.5.3.2.3.8.1.5
'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)  

wfOspfVirtNbrEvents 1.3.6.1.4.1.18.3.5.3.2.3.8.1.6
'The number of times this virtual link has changed its state, or an error has occurred.'
OBJECT-TYPE    
  Counter  

wfOspfVirtNbrLSRetransQLen 1.3.6.1.4.1.18.3.5.3.2.3.8.1.7
'The current length of the retransmission queue.'
OBJECT-TYPE    
  Gauge  

wfOspfDynNbrTable 1.3.6.1.4.1.18.3.5.3.2.3.9
-- OSPF Dynamic Neighbor Table -- The OSPF Dynamic Neighbor Table describes all neighbors in -- the locality of the subject router learned during operation. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
OBJECT-TYPE    
  SEQUENCE OF  
    WfOspfDynNbrEntry

wfOspfDynNbrEntry 1.3.6.1.4.1.18.3.5.3.2.3.9.1
'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure'
OBJECT-TYPE    
  WfOspfDynNbrEntry  

wfOspfDynNbrState 1.3.6.1.4.1.18.3.5.3.2.3.9.1.1
'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)  

wfOspfDynNbrIpAddr 1.3.6.1.4.1.18.3.5.3.2.3.9.1.2
'The IP address of this neighbor.'
OBJECT-TYPE    
  IpAddress  

wfOspfDynNbrIfAddr 1.3.6.1.4.1.18.3.5.3.2.3.9.1.3
'The Interface IP address for this neighbor.'
OBJECT-TYPE    
  IpAddress  

wfOspfDynNbrAddressLessIndex 1.3.6.1.4.1.18.3.5.3.2.3.9.1.4
' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.'
OBJECT-TYPE    
  INTEGER  

wfOspfDynNbrRtrId 1.3.6.1.4.1.18.3.5.3.2.3.9.1.5
'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0
OBJECT-TYPE    
  IpAddress  

wfOspfDynNbrOptions 1.3.6.1.4.1.18.3.5.3.2.3.9.1.6
'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options'
OBJECT-TYPE    
  INTEGER  

wfOspfDynNbrPriority 1.3.6.1.4.1.18.3.5.3.2.3.9.1.7
'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.'
OBJECT-TYPE    
  INTEGER  

wfOspfDynNbrEvents 1.3.6.1.4.1.18.3.5.3.2.3.9.1.8
'The number of times this neighbor relationship has changed state, or an error has occurred.'
OBJECT-TYPE    
  Counter  

wfOspfDynNbrLSRetransQLen 1.3.6.1.4.1.18.3.5.3.2.3.9.1.9
'The current length of the retransmission queue.'
OBJECT-TYPE    
  Gauge  

Defined Objects

WfOspfAreaEntry  
SEQUENCE    
  INTEGER as wfOspfAreaDelete  
  INTEGER as wfOspfAreaDisable  
  INTEGER as wfOspfAreaState  
  IpAddress as wfOspfAreaId  
  INTEGER as wfOspfAuthType  
  INTEGER as wfOspfImportASExtern  
  INTEGER as wfOspfStubMetric  
  INTEGER as wfOspfImportSum  
  Counter as wfOspfSpfCnt  

WfOspfLsdbEntry  
SEQUENCE    
  IpAddress as wfOspfLsdbAreaId  
  INTEGER as wfOspfLsdbType  
  IpAddress as wfOspfLsdbLSID  
  IpAddress as wfOspfLsdbRouterId  
  INTEGER as wfOspfLsdbSequence  
  INTEGER as wfOspfLsdbAge  
  INTEGER as wfOspfLsdbChecksum  
  INTEGER as wfOspfLsdbAdvLen  

WfOspfAreaRangeEntry  
SEQUENCE    
  INTEGER as wfOspfAreaRangeDelete  
  INTEGER as wfOspfAreaRangeDisable  
  INTEGER as wfOspfAreaRangeState  
  IpAddress as wfOspfAreaRangeAreaID  
  IpAddress as wfOspfAreaRangeNet  
  IpAddress as wfOspfAreaRangeMask  

WfOspfIfEntry  
SEQUENCE    
  INTEGER as wfOspfIfDelete  
  INTEGER as wfOspfIfDisable  
  INTEGER as wfOspfIfState  
  IpAddress as wfOspfIfIpAddress  
  INTEGER as wfOspfAddressLessIf  
  IpAddress as wfOspfIfAreaId  
  INTEGER as wfOspfIfType  
  INTEGER as wfOspfIfRtrPriority  
  INTEGER as wfOspfIfTransitDelay  
  INTEGER as wfOspfIfRetransInterval  
  INTEGER as wfOspfIfHelloInterval  
  INTEGER as wfOspfIfRtrDeadInterval  
  INTEGER as wfOspfIfPollInterval  
  IpAddress as wfOspfIfDesignatedRouter  
  IpAddress as wfOspfIfBackupDesignatedRouter  
  INTEGER as wfOspfIfMetricCost  
  OCTET STRING as wfOspfIfAuthKey  
  Counter as wfOspfIfTxHellos  
  Counter as wfOspfIfTxDBDescripts  
  Counter as wfOspfIfTxLinkStateReqs  
  Counter as wfOspfIfTxLinkStateUpds  
  Counter as wfOspfIfTxLinkStateAcks  
  Counter as wfOspfIfRxHellos  
  Counter as wfOspfIfRxDBDescripts  
  Counter as wfOspfIfRxLinkStateReqs  
  Counter as wfOspfIfRxLinkStateUpds  
  Counter as wfOspfIfRxLinkStateAcks  
  Counter as wfOspfIfDrops  
  INTEGER as wfOspfMtuSize  

WfOspfVirtIfEntry  
SEQUENCE    
  INTEGER as wfOspfVirtIfDelete  
  INTEGER as wfOspfVirtIfDisable  
  INTEGER as wfOspfVirtIfState  
  IpAddress as wfOspfVirtIfAreaID  
  IpAddress as wfOspfVirtIfNeighbor  
  INTEGER as wfOspfVirtIfTransitDelay  
  INTEGER as wfOspfVirtIfRetransInterval  
  INTEGER as wfOspfVirtIfHelloInterval  
  INTEGER as wfOspfVirtIfRtrDeadInterval  
  OCTET STRING as wfOspfVirtIfAuthKey  
  Counter as wfOspfVirtIfTxHellos  
  Counter as wfOspfVirtIfTxDBDescripts  
  Counter as wfOspfVirtIfTxLinkStateReqs  
  Counter as wfOspfVirtIfTxLinkStateUpds  
  Counter as wfOspfVirtIfTxLinkStateAcks  
  Counter as wfOspfVirtIfRxHellos  
  Counter as wfOspfVirtIfRxDBDescripts  
  Counter as wfOspfVirtIfRxLinkStateReqs  
  Counter as wfOspfVirtIfRxLinkStateUpds  
  Counter as wfOspfVirtIfRxLinkStateAcks  
  Counter as wfOspfVirtIfDrops  

WfOspfNbrEntry  
SEQUENCE    
  INTEGER as wfOspfNbrDelete  
  INTEGER as wfOspfNbrDisable  
  INTEGER as wfOspfNbrState  
  IpAddress as wfOspfNbrIpAddr  
  IpAddress as wfOspfNbrIfAddr  
  INTEGER as wfOspfNbrAddressLessIndex  
  IpAddress as wfOspfNbrRtrId  
  INTEGER as wfOspfNbrOptions  
  INTEGER as wfOspfNbrPriority  
  Counter as wfOspfNbrEvents  
  Gauge as wfOspfNbrLSRetransQLen  

WfOspfVirtNbrEntry  
SEQUENCE    
  IpAddress as wfOspfVirtNbrArea  
  IpAddress as wfOspfVirtNbrRtrId  
  IpAddress as wfOspfVirtNbrIpAddr  
  INTEGER as wfOspfVirtNbrOptions  
  INTEGER as wfOspfVirtNbrState  
  Counter as wfOspfVirtNbrEvents  
  Gauge as wfOspfVirtNbrLSRetransQLen  

WfOspfDynNbrEntry  
SEQUENCE    
  INTEGER as wfOspfDynNbrState  
  IpAddress as wfOspfDynNbrIpAddr  
  IpAddress as wfOspfDynNbrIfAddr  
  INTEGER as wfOspfDynNbrAddressLessIndex  
  IpAddress as wfOspfDynNbrRtrId  
  INTEGER as wfOspfDynNbrOptions  
  INTEGER as wfOspfDynNbrPriority  
  Counter as wfOspfDynNbrEvents  
  Gauge as wfOspfDynNbrLSRetransQLen