RIVERSTONE-NOTIFICATIONS-MIB

File: RIVERSTONE-NOTIFICATIONS-MIB.mib (11256 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ENTITY-MIB RIVERSTONE-SMI-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
DisplayString MODULE-COMPLIANCE NOTIFICATION-GROUP
entPhysicalDescr riverstoneMibs

Defined Objects

rsNotificationsMib 1.3.6.1.4.1.5567.2.33
This module describes the set of notifications specific to the Devices from Riverstone Networks platform. This module represents the total set of enterprise notifications, some are conditionally mandatory depending on platform capabilities.
MODULE-IDENTITY    

rsNotifications 1.3.6.1.4.1.5567.2.33.1
OBJECT IDENTIFIER    

rsNotificationControl 1.3.6.1.4.1.5567.2.33.1.1
OBJECT IDENTIFIER    

rsEnvNotificationGroup 1.3.6.1.4.1.5567.2.33.1.2
OBJECT IDENTIFIER    

rsEnvNotifications 1.3.6.1.4.1.5567.2.33.1.2.0
OBJECT IDENTIFIER    

rsEnvirPowerSupplyFailed 1.3.6.1.4.1.5567.2.33.1.2.0.1
A power supply on the sending device has failed. The entPhysicalDescr object identifies the failed supply.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirPowerSupplyRecovered 1.3.6.1.4.1.5567.2.33.1.2.0.2
A power supply on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered supply.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirFanFailed 1.3.6.1.4.1.5567.2.33.1.2.0.3
A Fan tray on the sending device has failed. The entPhysicalDescr object identifies the failed fan tray.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirFanRecovered 1.3.6.1.4.1.5567.2.33.1.2.0.4
A Fan tray on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered Fan tray.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirTempExceeded 1.3.6.1.4.1.5567.2.33.1.2.0.5
A temperature inside the chassis on the sending device has exceeded normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirTempNormal 1.3.6.1.4.1.5567.2.33.1.2.0.6
A temperature inside the chassis on the sending device has returned to normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirHotSwapIn 1.3.6.1.4.1.5567.2.33.1.2.0.7
A module has been inserted into the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric bay.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirHotSwapOut 1.3.6.1.4.1.5567.2.33.1.2.0.8
A module has been turned off or removed from the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirBackupControlModuleOnline 1.3.6.1.4.1.5567.2.33.1.2.0.9
A backup control module that was in standby mode has taken over for a failed primary control module. The objec entPhysicalDescr identifies the now active control module.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirSwitchingFabricFailure 1.3.6.1.4.1.5567.2.33.1.2.0.10
The primary switching fabric that was in standby mode has failed. The object entPhysicalDescr identifies the failed switching fabric. If there is a backup switching fabric and if it comes up ok, rsEnvirSwitchingFabricFailover would be sent after this one.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirSwitchingFabricFailover 1.3.6.1.4.1.5567.2.33.1.2.0.11
A backup switching fabric that was in standby mode has taken over for a failed primary switching fabric. The object entPhysicalDescr identifies the now active switching fabric. This would be sent after sending rsEnvirSwitchingFabricFailure.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsEnvirTempTooLow 1.3.6.1.4.1.5567.2.33.1.2.0.12
A temperature inside the chassis on the sending device has fallen below normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor.
NOTIFICATION-TYPE    
  entPhysicalDescr  

rsSyslog2SNMPMapGroup 1.3.6.1.4.1.5567.2.33.1.3
OBJECT IDENTIFIER    

rsSyslog2SNMPMapNotifications 1.3.6.1.4.1.5567.2.33.1.3.0
OBJECT IDENTIFIER    

rsSyslog2SNMPMap 1.3.6.1.4.1.5567.2.33.1.3.0.1
A backup control module that was in standby mode has taken over for a failed primary control module. The objec entPhysicalDescr identifies the now active control module.
NOTIFICATION-TYPE    
  rsS2SModuleId  
  rsS2SSeverity  
  rsS2SMessage  

rsS2SModuleId 1.3.6.1.4.1.5567.2.33.1.3.1
Name of the software module that is generating this syslog message.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

rsS2SSeverity 1.3.6.1.4.1.5567.2.33.1.3.2
Severity of the event that caused the syslog message to be generated.
OBJECT-TYPE    
  INTEGER fatal(1), error(2), warning(3), information(4)  

rsS2SMessage 1.3.6.1.4.1.5567.2.33.1.3.3
Text message describing the event that resulted in the syslog message being generated. Any instance identifiers will be embedded in this message text.
OBJECT-TYPE    
  DisplayString SIZE(0..256)  

rsNotificationConformance 1.3.6.1.4.1.5567.2.33.2
OBJECT IDENTIFIER    

rsNotificationCompliances 1.3.6.1.4.1.5567.2.33.2.1
OBJECT IDENTIFIER    

rsNotificationComplianceV10 1.3.6.1.4.1.5567.2.33.2.1.1
The compliance statement for the RIVERSTONE-NOTIFICATIONS-MIB.
MODULE-COMPLIANCE    

rsNotificationComplianceV11 1.3.6.1.4.1.5567.2.33.2.1.2
Add compliance that includes the two new notifications.
MODULE-COMPLIANCE    

rsNotificationComplianceV12 1.3.6.1.4.1.5567.2.33.2.1.3
Add compliance that includes the two new notifications.
MODULE-COMPLIANCE    

rsEnvNotificationConfGroup 1.3.6.1.4.1.5567.2.33.2.2
OBJECT IDENTIFIER    

rsNotificationConfGroupV10 1.3.6.1.4.1.5567.2.33.2.2.1
A base set of notifications for chassis based devices.
NOTIFICATION-GROUP    

rsNotificationSwitchingFabric 1.3.6.1.4.1.5567.2.33.2.2.2
A set of switching fabric notifications.
NOTIFICATION-GROUP    

rsS2SNotificationConfGroup 1.3.6.1.4.1.5567.2.33.2.3
OBJECT IDENTIFIER    

rsNotificationSyslog2SNMPMap 1.3.6.1.4.1.5567.2.33.2.3.1
A notification to map syslog message to SNMP.
NOTIFICATION-GROUP