RM1-MIB

File: RM1-MIB.mib (16381 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
SNMPv2-SMI SNMPv2-TC

Imported symbols

NetworkAddress TimeTicks enterprises
Counter OBJECT-TYPE DisplayString
MODULE-IDENTITY ObjectName Integer32
Counter32 snmpModules TruthValue
DisplayString TestAndIncr TimeStamp
RowStatus

Defined Objects

lucent 1.3.6.1.4.1.1751
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.1751.1
OBJECT IDENTIFIER    

softSwitch 1.3.6.1.4.1.1751.1.1198
OBJECT IDENTIFIER    

resourceMonitor 1.3.6.1.4.1.1751.1.1198.4
OBJECT IDENTIFIER    

rm1 1.3.6.1.4.1.1751.1.1198.4.1
The MIB module for entities implementing the xxxx protocol.
MODULE-IDENTITY    

rmSystem 1.3.6.1.4.1.1751.1.1198.4.1.1
OBJECT IDENTIFIER    

rmDescr 1.3.6.1.4.1.1751.1.1198.4.1.1.1
A textual description of the entity. This value should include the full name and version identification of the resource monitor software. It is mandatory that this only contain printable ASCII characters.
OBJECT-TYPE    
  DisplayString  

rmObjectID 1.3.6.1.4.1.1751.1.1198.4.1.1.2
An internal identification for this resource monitor.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rmUpTime 1.3.6.1.4.1.1751.1.1198.4.1.1.3
The time (in hundredths of a second) since the resource monitor deamon was last re-initialized.
OBJECT-TYPE    
  TimeTicks  

rmNetAddress 1.3.6.1.4.1.1751.1.1198.4.1.1.4
The ip address of the host on which this deamon is running.
OBJECT-TYPE    
  NetworkAddress  

rmControl 1.3.6.1.4.1.1751.1.1198.4.1.1.5
This is the settable field that in turn controls some of the functioning of the resource monitor. At present, this field is not used. It has been created for future expansion.
OBJECT-TYPE    
  DisplayString  

rmDiskGrp 1.3.6.1.4.1.1751.1.1198.4.1.2
OBJECT IDENTIFIER    

diskPeriod 1.3.6.1.4.1.1751.1.1198.4.1.2.1
Defines disk monitoring frequency. Period in seconds. It is a settable field, so user can alter how frequently the file systems are checked for size limits.
OBJECT-TYPE    
  INTEGER 1..60  

diskUsageWarningPct 1.3.6.1.4.1.1751.1.1198.4.1.2.2
If disk usage exceeds this amount of percentage, a diskAttention trap will be emitted. severity: MAJOR
OBJECT-TYPE    
  INTEGER 1..99  

diskUsageAlarmPct 1.3.6.1.4.1.1751.1.1198.4.1.2.3
If Disk usage exceeds this mount of percentage, a diskAlarm trap will be emitted. severity: CRITICAL
OBJECT-TYPE    
  INTEGER 1..99  

duNumber 1.3.6.1.4.1.1751.1.1198.4.1.2.4
The number of file systems being monitored. (indicates the number of rows in diskUsageTable)
OBJECT-TYPE    
  INTEGER 1..2048  

diskUsageTable 1.3.6.1.4.1.1751.1.1198.4.1.2.5
A list of file system entries. The number of entries is given by the value of duNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    DUEntry

diskUsageEntry 1.3.6.1.4.1.1751.1.1198.4.1.2.5.1
OBJECT-TYPE    
  DUEntry  

duIndex 1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.1
A unique value for each disk slice. Goes from 1 to N
OBJECT-TYPE    
  INTEGER 1..2048  

duFSName 1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.2
The name of the file system being monitored
OBJECT-TYPE    
  DisplayString  

duSize 1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.3
The size of the file system in k bytes
OBJECT-TYPE    
  INTEGER 1..8192  

duPctUsed 1.3.6.1.4.1.1751.1.1198.4.1.2.5.1.4
The percentage of the file system used up
OBJECT-TYPE    
  INTEGER 0..99  

rmCpuGrp 1.3.6.1.4.1.1751.1.1198.4.1.3
OBJECT IDENTIFIER    

cpuPeriod 1.3.6.1.4.1.1751.1.1198.4.1.3.1
Defines cpu monitoring frequency. The CPU load and utilization are measure as per this frequency. Period can be either one, ten or fifteen minutes. Setting it to any other value will cause the set to fail (the old value will stay).
OBJECT-TYPE    
  INTEGER 1..15  

cpuUtilization 1.3.6.1.4.1.1751.1.1198.4.1.3.2
The current cpu utilization percentage.
OBJECT-TYPE    
  INTEGER 1..99  

cpuUtilWarningPct 1.3.6.1.4.1.1751.1.1198.4.1.3.3
If cpu utlization exceeds this percentage, a cpuUtilAttention trap will be emitted. severity: MAJOR
OBJECT-TYPE    
  INTEGER 1..99  

cpuUtilAlarmPct 1.3.6.1.4.1.1751.1.1198.4.1.3.4
If CPU utilization exceeds this percentage, a cpuUtilAlarm trap will be emitted. severity: CRITICAL
OBJECT-TYPE    
  INTEGER 1..99  

cpuLoad 1.3.6.1.4.1.1751.1.1198.4.1.3.5
The current value of cpu load. Note: Although the syntax is DisplayString, the real semantics should be floating point value of cpu load. For example: 0.3, 2.5, etc.
OBJECT-TYPE    
  DisplayString  

cpuLoadWarningThreshold 1.3.6.1.4.1.1751.1.1198.4.1.3.6
If cpu load exceeds this amount, a cpuLoadAttention trap will be emitted. severity: MAJOR Note: Although the syntax is DisplayString, the real semantics should be floating point value.
OBJECT-TYPE    
  DisplayString  

cpuLoadAlarmThreshold 1.3.6.1.4.1.1751.1.1198.4.1.3.7
If cpu load exceeds this amount, a cpuLoadAlarm trap will be emitted. severity: CRITICAL Note: Although the syntax is DisplayString, the real semantics should be floating point value.
OBJECT-TYPE    
  DisplayString  

rmFileGrp 1.3.6.1.4.1.1751.1.1198.4.1.4
OBJECT IDENTIFIER    

filePeriod 1.3.6.1.4.1.1751.1.1198.4.1.4.1
Defines log file monitoring frequency. This value is expressed as the number of minutes.
OBJECT-TYPE    
  INTEGER 1..60  

fmNumber 1.3.6.1.4.1.1751.1.1198.4.1.4.2
The number of files being monitored by this deamon.
OBJECT-TYPE    
  INTEGER 1..8192  

fmTable 1.3.6.1.4.1.1751.1.1198.4.1.4.3
A list of files being monitored for size.
OBJECT-TYPE    
  SEQUENCE OF  
    FileEntry

fmEntry 1.3.6.1.4.1.1751.1.1198.4.1.4.3.1
Each entry represents one log file, and is a sequence of type FileEntry, which is explained below.
OBJECT-TYPE    
  FileEntry  

fmIndex 1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.1
A unique number for each file being monitored. Goes from 1 to N
OBJECT-TYPE    
  INTEGER 1..8192  

fmName 1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.2
the absolute path for the file being monitored.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

fmCurSize 1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.3
The is the current size of the file.
OBJECT-TYPE    
  INTEGER 1..8192  

fmThreshold 1.3.6.1.4.1.1751.1.1198.4.1.4.3.1.4
This is the size above which a FileSizeEvent trap will be sent out. This information is read from the config directory when the RMpep is started.
OBJECT-TYPE    
  INTEGER 1..8192  

archiveDir 1.3.6.1.4.1.1751.1.1198.4.1.4.4
This variable returns the current archive directory. ResMon may be periodically asked to archive log files. After detecting and reporting a fileOversize event, resMon may also be told to archive the log file along with file monitoring target switch. The current running policy determines the archive action.
OBJECT-TYPE    
  DisplayString  

rmProcessGrp 1.3.6.1.4.1.1751.1.1198.4.1.5
OBJECT IDENTIFIER    

processPeriod 1.3.6.1.4.1.1751.1.1198.4.1.5.1
Defines process monitoring frequency. Period in seconds. It is a settable field, so user can alter how frequently the processes are checked for CPU and memory utilization
OBJECT-TYPE    
  INTEGER 1..60  

processNumber 1.3.6.1.4.1.1751.1.1198.4.1.5.2
The number of processes being monitored. (indicates the number of rows in processTable)
OBJECT-TYPE    
  INTEGER 1..8192  

processTable 1.3.6.1.4.1.1751.1.1198.4.1.5.3
A list of process entries. The number of entries is given by the value of processNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ProcessEntry

processEntry 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1
OBJECT-TYPE    
  ProcessEntry  

processIndex 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.1
A unique value for each process. Goes from 1 to N
OBJECT-TYPE    
  INTEGER 1..8192  

processID 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.2
A unique value for each process.
OBJECT-TYPE    
  INTEGER 1..65535  

processName 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.3
The name of the process.
OBJECT-TYPE    
  DisplayString  

processUpTime 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.4
The time since the process is up running.
OBJECT-TYPE    
  INTEGER 1..65535  

processCPUUsageWarnMark 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.5
The threshold when resMon should generate a warning for netMon.
OBJECT-TYPE    
  INTEGER 1..99  

processCPUUsageAlarmMark 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.6
The threshold when resMon should generate a alarm for netMon.
OBJECT-TYPE    
  INTEGER 1..99  

processCPUUsageCurrent 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.7
The amount of CPU time this process used.
OBJECT-TYPE    
  INTEGER 1..99  

processMemUsageAlarmMark 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.8
The memory usage threshold when resMon should generate a memory usage alarm for netMon.
OBJECT-TYPE    
  INTEGER 1..99  

processMemUsageCurrent 1.3.6.1.4.1.1751.1.1198.4.1.5.3.1.9
The amount of memory this process used.
OBJECT-TYPE    
  INTEGER 1..8192  

Defined Objects

DUEntry  
SEQUENCE    
  INTEGER as duIndex  
  DisplayString as duFSName  
  INTEGER as duSize  
  INTEGER as duPctUsed  

FileEntry  
SEQUENCE    
  INTEGER as fmIndex  
  DisplayString as fmName  
  INTEGER as fmCurSize  
  INTEGER as fmThreshold  

ProcessEntry  
SEQUENCE    
  INTEGER as processIndex  
  INTEGER as processID  
  DisplayString as processName  
  INTEGER as processUpTime  
  INTEGER as processCPUUsageWarnMark  
  INTEGER as processCPUUsageAlarmMark  
  INTEGER as processCPUUsageCurrent  
  INTEGER as processMemUsageAlarmMark  
  INTEGER as processMemUsageCurrent