
| SNMPv2-CONF | SNMPv2-SMI | SNMPv2-TC |
| RFC1213-MIB | IF-MIB | DS0-MIB |
| SALIX-MIB |
| OBJECT-GROUP | MODULE-IDENTITY | OBJECT-TYPE |
| Integer32 | IpAddress | Counter32 |
| TimeStamp | RowStatus | DisplayString |
| MODULE-COMPLIANCE | InterfaceIndex | dsx0ConfigEntry |
| platform1 |
| salixDsx0MIB | 1.3.6.1.4.1.2158.5.1.4 | ||
| The MIB describing SALIX specific DS0 objects | |||
| MODULE-IDENTITY | |||
| salixDsx0MIBObjects | 1.3.6.1.4.1.2158.5.1.4.1 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0CrossConnectTable | 1.3.6.1.4.1.2158.5.1.4.1.1 | ||
| The table that describes the active DS0 Cross Connections on the system. There should be one entry for each active Cross Connect on the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SalixDsx0CrossConnectEntry | |||
| salixDsx0CrossConnectEntry | 1.3.6.1.4.1.2158.5.1.4.1.1.1 | ||
| An entry in the ITX DS0 cross connect table. This entry describes the status of the DS0 cross connect, and also provides information describing the cross connect | |||
| OBJECT-TYPE | |||
| SalixDsx0CrossConnectEntry | |||
| salixDsx0CrossConnectHighInterface | 1.3.6.1.4.1.2158.5.1.4.1.1.1.1 | ||
| The high ifIndex for identifying the cross connect. Identifies the DS0 Channel involved in the cross connect. The salixDsx0CrossConnectHighInterface value should be higher than the salixDsx0CrossConnectLowInterface value | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| salixDsx0CrossConnectLowInterface | 1.3.6.1.4.1.2158.5.1.4.1.1.1.2 | ||
| The low ifIndex for identifying the cross connect. Identifies the DS0 Channel involved in the cross connect. The salixDsx0CrossConnectLowInterface value should be lower than the salixDsx0CrossConnectHighInterface value | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| salixDsx0CrossConnectDirection | 1.3.6.1.4.1.2158.5.1.4.1.1.1.3 | ||
| This attribute describes the direction of traffic flow the DS0 cross connect. high2low(1) - Traffic flows from the high interface to the low interface in the cross connect low2high(2) - Traffic flows from the low interface to the high interface in the cross connect bidirectional(3) - Traffic flows both directions through the cross connect | |||
| OBJECT-TYPE | |||
| INTEGER | high2low(1), low2high(2), bidirectional(3) | ||
| salixDsx0CrossConnectOperStatus | 1.3.6.1.4.1.2158.5.1.4.1.1.1.4 | ||
| This attribute indicates the operational state of the DS0 cross connection. up(1) - The cross connect is up and active down(2) - The cross connect is down and no traffic is passing unknown(3) - The status of the cross connect is not know | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), unknown(3) | ||
| salixDsx0CrossConnectStartTime | 1.3.6.1.4.1.2158.5.1.4.1.1.1.5 | ||
| The time at which the cross connect was created | |||
| OBJECT-TYPE | |||
| TimeStamp | |||
| salixDsx0CrossConnectRowStatus | 1.3.6.1.4.1.2158.5.1.4.1.1.1.6 | ||
| The status of this entry in the salixDsx0CrossConnectTable. This object is used to delete a salixDsx0CrossConnectTable entry. To destroy a cross connect, set this value to destory(6) Row status values: active(1) - set by the agent after this entry is created notInService(2) - not applicable notReady(3) - not applicable createAndGo(4) - not applicable createAndWait(5)- not applicable destroy(6) - set by the management entity to destroy entry | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| salixDsx0ConfigTable | 1.3.6.1.4.1.2158.5.1.4.1.2 | ||
| The DS0 Configuration table. Augments the DS0 Configuration table from the DS0-MIB. There is an entry in this table for each DS0 interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SalixDsx0ConfigEntry | |||
| salixDsx0ConfigEntry | 1.3.6.1.4.1.2158.5.1.4.1.2.1 | ||
| An augmented entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. | |||
| OBJECT-TYPE | |||
| SalixDsx0ConfigEntry | |||
| salixDsx0Status | 1.3.6.1.4.1.2158.5.1.4.1.2.1.1 | ||
| Indicated the status of the given DS0 notused(1) - The DS0 is not currently being used crossconnect(2) - The DS0 is currently cross connected rtpconnect(3) - The DS0 is currently connect to an RTP session loopback(4) - The DS0 is currently being looped back test(5) - The DS0 is currently being continuity tested unknown(6) - The status of the DS0 is not known | |||
| OBJECT-TYPE | |||
| INTEGER | notused(1), crossconnect(2), rtpconnect(3), loopback(4), test(5), unknown(6) | ||
| salixDsx0MIBTraps | 1.3.6.1.4.1.2158.5.1.4.2 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0MIBTrapPrefix | 1.3.6.1.4.1.2158.5.1.4.2.0 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0MIBCompliance | 1.3.6.1.4.1.2158.5.1.4.3 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0Groups | 1.3.6.1.4.1.2158.5.1.4.3.1 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0Group | 1.3.6.1.4.1.2158.5.1.4.3.1.1 | ||
| Additional salix specific objects for connections | |||
| OBJECT-GROUP | |||
| salixDsx0Compliances | 1.3.6.1.4.1.2158.5.1.4.3.2 | ||
| OBJECT IDENTIFIER | |||
| salixDsx0Compliance | 1.3.6.1.4.1.2158.5.1.4.3.2.1 | ||
| The basic implementation requirements for the SALIX-DS0-MIB. | |||
| MODULE-COMPLIANCE | |||
| SalixDsx0CrossConnectEntry | |||
| SEQUENCE | |||
| InterfaceIndex as salixDsx0CrossConnectHighInterface | |||
| InterfaceIndex as salixDsx0CrossConnectLowInterface | |||
| INTEGER as salixDsx0CrossConnectDirection | |||
| INTEGER as salixDsx0CrossConnectOperStatus | |||
| TimeStamp as salixDsx0CrossConnectStartTime | |||
| RowStatus as salixDsx0CrossConnectRowStatus | |||
| SalixDsx0ConfigEntry | |||
| SEQUENCE | |||
| INTEGER as salixDsx0Status | |||