
SNMPv2-MIB
File:
SNMPv2-MIB.mib (33536 bytes)
Imported modules
Imported symbols
Defined Objects
| system |
1.3.6.1.2.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| sysDescr |
1.3.6.1.2.1.1.1 |
| A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..255) |
|
| sysObjectID |
1.3.6.1.2.1.1.2 |
| The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.424242, it could assign the identifier 1.3.6.1.4.1.424242.1.1 to its `Fred Router'. |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| sysUpTime |
1.3.6.1.2.1.1.3 |
| The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| sysName |
1.3.6.1.2.1.1.5 |
| An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..255) |
|
| sysLocation |
1.3.6.1.2.1.1.6 |
| The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..255) |
|
| sysServices |
1.3.6.1.2.1.1.7 |
| A value which indicates the set of services that this entity may potentially offer. The value is a sum. This sum initially takes the value zero. Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs only routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., supports the IP) 4 end-to-end (e.g., supports the TCP) 7 applications (e.g., supports the SMTP) For systems including OSI protocols, layers 5 and 6 may also be counted. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..127 |
|
| sysORTable |
1.3.6.1.2.1.1.9 |
| The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysOREntry |
|
| sysOREntry |
1.3.6.1.2.1.1.9.1 |
| An entry (conceptual row) in the sysORTable. |
| OBJECT-TYPE |
|
|
|
| |
SysOREntry |
|
|
| sysORIndex |
1.3.6.1.2.1.1.9.1.1 |
| The auxiliary variable used for identifying instances of the columnar objects in the sysORTable. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2147483647 |
|
| sysORID |
1.3.6.1.2.1.1.9.1.2 |
| An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder. |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| snmp |
1.3.6.1.2.1.11 |
| OBJECT IDENTIFIER |
|
|
|
| snmpOutPkts |
1.3.6.1.2.1.11.2 |
| The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInTooBigs |
1.3.6.1.2.1.11.8 |
| The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `tooBig'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInNoSuchNames |
1.3.6.1.2.1.11.9 |
| The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `noSuchName'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInBadValues |
1.3.6.1.2.1.11.10 |
| The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `badValue'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInReadOnlys |
1.3.6.1.2.1.11.11 |
| The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInGenErrs |
1.3.6.1.2.1.11.12 |
| The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `genErr'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInTotalReqVars |
1.3.6.1.2.1.11.13 |
| The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpInTotalSetVars |
1.3.6.1.2.1.11.14 |
| The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpOutTooBigs |
1.3.6.1.2.1.11.20 |
| The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `tooBig.' |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpOutNoSuchNames |
1.3.6.1.2.1.11.21 |
| The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status was `noSuchName'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpOutBadValues |
1.3.6.1.2.1.11.22 |
| The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `badValue'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpOutGenErrs |
1.3.6.1.2.1.11.24 |
| The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `genErr'. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpEnableAuthenTraps |
1.3.6.1.2.1.11.30 |
| Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| snmpSilentDrops |
1.3.6.1.2.1.11.31 |
| The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpProxyDrops |
1.3.6.1.2.1.11.32 |
| The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snmpTrap |
1.3.6.1.6.3.1.1.4 |
| OBJECT IDENTIFIER |
|
|
|
| snmpTrapOID |
1.3.6.1.6.3.1.1.4.1 |
| The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU. |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| snmpTrapEnterprise |
1.3.6.1.6.3.1.1.4.3 |
| The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind. |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| snmpTraps |
1.3.6.1.6.3.1.1.5 |
| OBJECT IDENTIFIER |
|
|
|
| coldStart |
1.3.6.1.6.3.1.1.5.1 |
| A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. |
| NOTIFICATION-TYPE |
|
|
|
| warmStart |
1.3.6.1.6.3.1.1.5.2 |
| A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered. |
| NOTIFICATION-TYPE |
|
|
|
| authenticationFailure |
1.3.6.1.6.3.1.1.5.5 |
| An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated. |
| NOTIFICATION-TYPE |
|
|
|
| snmpSet |
1.3.6.1.6.3.1.1.6 |
| OBJECT IDENTIFIER |
|
|
|
| snmpSetSerialNo |
1.3.6.1.6.3.1.1.6.1 |
| An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate. |
| OBJECT-TYPE |
|
|
|
| |
TestAndIncr |
|
|
| snmpBasicCompliance |
1.3.6.1.6.3.1.2.1.2 |
| The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2. |
| MODULE-COMPLIANCE |
|
|
|
| snmpSetGroup |
1.3.6.1.6.3.1.2.2.5 |
| A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation. |
| OBJECT-GROUP |
|
|
|
| systemGroup |
1.3.6.1.6.3.1.2.2.6 |
| The system group defines objects which are common to all managed systems. |
| OBJECT-GROUP |
|
|
|
| snmpGroup |
1.3.6.1.6.3.1.2.2.8 |
| A collection of objects providing basic instrumentation and control of an SNMP entity. |
| OBJECT-GROUP |
|
|
|
Defined Objects
| SysOREntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as sysORIndex |
|
|
| |
OBJECT IDENTIFIER as sysORID |
|
|
| |
DisplayString as sysORDescr |
|
|
| |
TimeStamp as sysORUpTime |
|
|