TIMETRA-PORT-MIB

File: TIMETRA-PORT-MIB.mib (437424 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-TC-MIB TIMETRA-GLOBAL-MIB TIMETRA-CHASSIS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 IpAddress
Counter64 Integer32 Gauge32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION DateAndTime RowStatus
TimeStamp TimeInterval TruthValue
MacAddress RowPointer DisplayString
TmnxActionType TmnxPortID TItemDescription
TNamedItemOrEmpty TNamedItem TFCName
TQueueId TmnxOperState TPortSchedulerPIR
TPortSchedulerCIR TItemLongDescription TSecondaryShaper10GPIRRate
TMlpppQoSProfileId timetraSRMIBModules tmnxHwObjs
tmnxHwNotification tmnxHwConformance tmnxChassisIndex
tmnxChassisNotifyChassisId TmnxAlarmState TmnxPortAdminStatus
TmnxMDAChanType

Defined Objects

tmnxPortMIBModule 1.3.6.1.4.1.6527.1.1.3.25
This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxPortConformance 1.3.6.1.4.1.6527.3.1.1.2.2
OBJECT IDENTIFIER    

tmnxPortCompliances 1.3.6.1.4.1.6527.3.1.1.2.2.1
OBJECT IDENTIFIER    

tmnxPortComp7750 1.3.6.1.4.1.6527.3.1.1.2.2.1.3
OBJECT IDENTIFIER    

tmnxPortComp7750V4v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.3.2
The compliance statement for revision 4.0 of TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. tmnxMlImaBundleGroup was added as of R4.
MODULE-COMPLIANCE    

tmnxPortComp7750V5v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.3.3
The compliance statement for revision 5.0 of TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
MODULE-COMPLIANCE    

tmnxPortComp7750V6v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.3.4
The compliance statement for revision 6.0 of TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
MODULE-COMPLIANCE    

tmnxPortComp7450 1.3.6.1.4.1.6527.3.1.1.2.2.1.4
OBJECT IDENTIFIER    

tmnxPortComp7450V4v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2
The compliance statement for revision 4.0 of TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
MODULE-COMPLIANCE    

tmnxPortComp7450V5v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.4.3
The compliance statement for revision 5.0 of TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
MODULE-COMPLIANCE    

tmnxPortComp7450V6v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.4.4
The compliance statement for revision 5.0 of TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
MODULE-COMPLIANCE    

tmnxPortComp7710 1.3.6.1.4.1.6527.3.1.1.2.2.1.5
OBJECT IDENTIFIER    

tmnxPortComp7710V3v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1
The compliance statement for revision 3.0 of TIMETRA-PORT-MIB.
MODULE-COMPLIANCE    

tmnxPortComp7710V5v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.5.2
The compliance statement for revision 5.0 of TIMETRA-PORT-MIB.
MODULE-COMPLIANCE    

tmnxPortComp7710V6v0 1.3.6.1.4.1.6527.3.1.1.2.2.1.5.3
The compliance statement for revision 6.0 of TIMETRA-PORT-MIB.
MODULE-COMPLIANCE    

tmnxPortGroups 1.3.6.1.4.1.6527.3.1.1.2.2.2
OBJECT IDENTIFIER    

tmnxPortFRGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.5
The group of objects supporting management of Frame Relay DLCMI on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxQosAppObjsGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.6
The group of objects supporting management of Qos associations of the buffer pools to mdas, ports, channels and bundles on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortTestGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.7
The group of objects supporting management of port testing on Alcatel 7x50 SR series system.
OBJECT-GROUP    

tmnxPortObsoleteGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.11
The group of objects in TIMETRA-PORT-MIB which are obsoleted.
OBJECT-GROUP    

tmnxPortIngrMdaQosStatR2r1Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.14
The group of objects that describe the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA for revision 2.1 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortStatsR2r1Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.16
The group of objects supporting port statistics for revision 2.1 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotificationGroupR2r1 1.3.6.1.4.1.6527.3.1.1.2.2.2.17
The group of notifications supporting the management of physical ports for revision 2.1 on Alcatel 7x50 SR series systems.
NOTIFICATION-GROUP    

tmnxPortNotifyObjsGroupR2r1 1.3.6.1.4.1.6527.3.1.1.2.2.2.18
The group of objects supporting physical port notifications for revision 2.1 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotifyObsoleteGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.20
The group of notifications supporting the management of physical ports made obsolete for revision 2.1 on Alcatel 7x50 SR series systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems.
NOTIFICATION-GROUP    

tmnxPortSonetV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.21
The group of objects supporting management of SONET type ports for revision 3.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortTDMV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.22
The group of objects supporting management of TDM type ports for revision 3.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortATMV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.23
The group of objects supporting management of ATM interfaces for version 3.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxScalarPortV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.24
The group of objects supporting management for general port settings for revision 3.0 on Alcatel 7x50 series systems.
OBJECT-GROUP    

tmnxPortV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.25
The group of objects supporting management of physical port capabilities for revision 3.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxCiscoHDLCGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.26
The group of objects supporting Cisco HDLC encapsulation on Alcatel 7750 SR series systems.
OBJECT-GROUP    

tmnxMlBundleV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.27
The group of objects supporting management MLBUNDLES for revision 3.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxObsoleteGroupV3v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.28
The group of objects obsoleted in the 7x50 SR series 3.0 release
OBJECT-GROUP    

tmnxPortEthernetV3v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.29
The group of objects supporting management of Ethernet ports for revision 3.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortTDMGroupV4v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.30
The group of objects supporting management of TDM type ports for version 4.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortATMGroupV4v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.31
The group of objects supporting management of ATM interfaces for version 4.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxMlBundleGroupV4v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.32
The group of objects supporting management MLBUNDLES for revision 4.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxMlImaBundleGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.33
The group of objects supporting management of Ima Groups and Members on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnx7710PortTDMGroupV3v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.34
The group of objects supporting management of TDM type ports specific to the Alcatel 7710 SR series systems for revision 3.0.
OBJECT-GROUP    

tmnxPortGroupV4v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.35
The group of objects supporting management of physical port capabilities for revision 4.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxObsoleteGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.36
The group of objects obsoleted in the 7x50 SR series 5.0 release
OBJECT-GROUP    

tmnxPortSchedV5v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.37
The group of objects supporting management of physical port virtual scheduler capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortEthernetV5v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.38
The group of objects supporting management of Ethernet ports for revision 5.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.39
The group of objects supporting management of physical port capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxMlBundleGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.40
The group of objects supporting management MLBUNDLES for revision 5.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotificationGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.41
The group of notifications supporting the management of physical ports for revision 5.0 on Alcatel 7x50 SR series systems.
NOTIFICATION-GROUP    

tmnxPortTDMGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.42
The group of objects supporting management of TDM type ports for version 5.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnx7710PortTDMGroupV5v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.43
The group of objects supporting management of TDM type ports specific to the revision 5.0 on Alcatel 7710 SR series systems.
OBJECT-GROUP    

tmnxPortCemGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.44
The group of objects supporting management of CEM encapsulation TDM type ports specific to the Alcatel 7750 and 7710 SR series systems for revision 6.0.
OBJECT-GROUP    

tmnxMcMlpppBundleGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.45
The group of objects supporting management of MClass MLPPP BUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotificationGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.46
The group of notifications supporting the management of physical ports for revision 6.0 on Alcatel 7x50 SR series systems.
NOTIFICATION-GROUP    

tmnxPortEthernetV6v0Group 1.3.6.1.4.1.6527.3.1.1.2.2.2.47
The group of objects supporting management of Ethernet ports for revision 6.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxMlBundleGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.48
The group of objects supporting management MLBUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxMlpppBundleGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.49
The group of objects supporting management of MLPPP Bundles on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotificationGroupV3v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.50
The group of notifications supporting the management of physical ports for revision 3.0 on Alcatel 7x50 SR series systems.
NOTIFICATION-GROUP    

tmnxPortTDMGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.52
The group of objects supporting management of TDM type ports for version 6.0 on the Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxDigitalDiagMonitorGroup 1.3.6.1.4.1.6527.3.1.1.2.2.2.53
The group of objects supporting the management of Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.54
The group of objects supporting management of physical port capabilities for revision 6.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxNamedPoolGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.55
The group of objects supporting the Named Pool feature for revision 6.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortNotifyObjsGroupV6v0 1.3.6.1.4.1.6527.3.1.1.2.2.2.57
The group of objects supporting physical port notifications for revision 6.0 on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

tmnxPortObjs 1.3.6.1.4.1.6527.3.1.2.2.4
OBJECT IDENTIFIER    

tmnxPortTableLastChange 1.3.6.1.4.1.6527.3.1.2.2.4.1
The value of sysUpTime when the tmnxPortTable was last changed.
OBJECT-TYPE    
  TimeStamp  

tmnxPortTable 1.3.6.1.4.1.6527.3.1.2.2.4.2
The port table has an entry for each port on each IOM card in each chassis in the TMNX system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortEntry

tmnxPortEntry 1.3.6.1.4.1.6527.3.1.2.2.4.2.1
Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal.
OBJECT-TYPE    
  TmnxPortEntry  

tmnxPortPortID 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1
tmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.
OBJECT-TYPE    
  TmnxPortID  

tmnxPortLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2
The tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.
OBJECT-TYPE    
  TimeStamp  

tmnxPortType 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3
The type of port or optical pack installed.
OBJECT-TYPE    
  TmnxPortType  

tmnxPortClass 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4
The class of port or optical pack installed. This can be derived from tmnxPortType.
OBJECT-TYPE    
  TmnxPortClass  

tmnxPortDescription 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5
A textual string containing user supplied information about the interface.
OBJECT-TYPE    
  TItemLongDescription  

tmnxPortName 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6
The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortAlias 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7
This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tmnxPortAlias through a network management set operation, then the agent must retain the supplied value in the tmnxPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortUserAssignedMac 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8
When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the system assigned MAC address.
OBJECT-TYPE    
  TruthValue  

tmnxPortMacAddress 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9
When tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress returns the same value as tmnxPortMacAddress, the hardware or system assigned MAC address. When tmnxPortMacAddress is modified by a SET request, the agent sets tmnxPortUserAssignedMac to 'true'. Setting tmnxPortMacAddress to all zeros causes the agent to revert to using the default tmnxPortHwMacAddress and also to return tmnxPortUserAssignedMac as 'false'.
OBJECT-TYPE    
  MacAddress  

tmnxPortHwMacAddress 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10
The interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.
OBJECT-TYPE    
  MacAddress  

tmnxPortMode 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11
The tmnxPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tmnxPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tmnxPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tmnxPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those values on the mode change.
OBJECT-TYPE    
  INTEGER undefined(0), access(1), network(2)  

tmnxPortEncapType 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12
The type of encapsulation protocol configured on this port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tmnxPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tmnxPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tmnxPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tmnxPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.
OBJECT-TYPE    
  INTEGER unknown(0), nullEncap(1), qEncap(2), mplsEncap(3), bcpNullEncap(4), bcpDot1qEncap(5), ipcpEncap(6), frEncap(7), pppAutoEncap(8), atmEncap(9), qinqEncap(10), wanMirrorEncap(11), ciscoHDLCEncap(12), cemEncap(13)  

tmnxPortLagId 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13
The value of tmnxPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
OBJECT-TYPE    
  Unsigned32 0..200  

tmnxPortHoldTimeUp 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14
The value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTimeUp is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeUp is used instead.
OBJECT-TYPE    
  Unsigned32 0..50  

tmnxPortHoldTimeDown 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15
The value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHoldTimeDown is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeDown is used instead.
OBJECT-TYPE    
  Unsigned32 0..50  

tmnxPortUpProtocols 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16
The tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.
OBJECT-TYPE    
  BITS portUpIpv4(0), portUpMpls(1), portUpBcp(2), portUpIso(3), portUpFr(4), portUpAtm(5), portUpChdlc(6), portUpIma(7), portUpIpv6(8)  

tmnxPortConnectorType 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17
The type of connector installed on this port.
OBJECT-TYPE    
  TmnxPortConnectorType  

tmnxPortTransceiverType 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25
Type of the transceiver.
OBJECT-TYPE    
  INTEGER unknown(0), gbic(1), moduleConnectorSolderedToMotherboard(2), sfpTransceiver(3), xbiTransceiver(4), xenpakTransceiver(5), xfpTransceiver(6), xffTransceiver(7), xfpeTransceiver(8), xpakTransceiver(9), x2Transceiver(10)  

tmnxPortTransceiverCode 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26
The code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.
OBJECT-TYPE    
  BITS unknown(0), oc48-longreach(1), oc48-intermediatereach(2), oc48-shortreach(3), oc12-singlemodelongreach(4), oc12-singlemodeinterreach(5), oc12-multimodeshortreach(6), oc3-singlemodelongreach(7), oc3-singlemodeinterreach(8), oc3-multi-modeshortreach(9), gige-1000base-t(10), gige-1000base-cx(11), gige-1000base-lx(12), gige-1000base-sx(13), faste-100base-mm-fx(14), faste-100base-sm-fx(15), xgige-10gbase-sr(16), xgige-10gbase-lr(17), xgige-10gbase-er(18), xgige-10gbase-sw(19), xgige-10gbase-lw(20), xgige-10gbase-ew(21)  

tmnxPortTransceiverLaserWaveLen 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27
The light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.
OBJECT-TYPE    
  Unsigned32  

tmnxPortTransceiverDiagCapable 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28
Indicates if the transceiver is capable of doing diagnostics.
OBJECT-TYPE    
  INTEGER notApplicable(0), true(1), false(2)  

tmnxPortTransceiverModelNumber 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29
Model number of the transceiver.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortSFPConnectorCode 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30
The external connector provided on the interface.
OBJECT-TYPE    
  INTEGER unknown(0), sc(1), fiberChannel-Style1-CopperConnector(2), fiberChannel-Style2-CopperConnector(3), bncortnc(4), fiberChannelCoaxialHeaders(5), fiberJack(6), lc(7), mt-rj(8), mu(9), sg(10), opticalPigtail(11), hssdcII(32), copperPigtail(33), copperGigE(128)  

tmnxPortSFPVendorOUI 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31
The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.
OBJECT-TYPE    
  Unsigned32  

tmnxPortSFPVendorManufactureDate 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32
The vendor's date code.
OBJECT-TYPE    
  DateAndTime  

tmnxPortSFPMedia 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33
The media supported for the SFP.
OBJECT-TYPE    
  INTEGER notApplicable(0), ethernet(1), sonetsdh(2)  

tmnxPortSFPEquipped 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34
Indicates if the SFP is equipped.
OBJECT-TYPE    
  TruthValue  

tmnxPortEquipped 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35
Indicates if there is an optics pack installed in this port or not.
OBJECT-TYPE    
  TruthValue  

tmnxPortLinkStatus 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36
Indicates whether or not the port has a physical link.
OBJECT-TYPE    
  TruthValue  

tmnxPortAdminStatus 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37
The desired administrative status of this port.
OBJECT-TYPE    
  TmnxPortAdminStatus  

tmnxPortOperStatus 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38
The current operational status of this port.
OBJECT-TYPE    
  TmnxPortOperStatus  

tmnxPortState 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39
The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.
OBJECT-TYPE    
  TmnxPortState  

tmnxPortPrevState 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40
The tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.
OBJECT-TYPE    
  TmnxPortState  

tmnxPortNumAlarms 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41
The number of alarms currently outstanding on this port.
OBJECT-TYPE    
  Unsigned32  

tmnxPortAlarmState 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42
The value of tmnxPortAlarmState indicates the current alarm state for this port.
OBJECT-TYPE    
  TmnxAlarmState  

tmnxPortLastAlarmEvent 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43
The value of tmnxPortLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tmnxPortAlarmState has a value of 'alarmCleared', the most recent alarm event will be in the nlmAlarmClearedTable. If it has a value of 'alarmActive', the entry pointed to is in the nlmAlarmActiveTable. If the value of tmnxPortLastAlarmEvent is '0.0', then either there have not been any alarm events associated with this chassis since the system was last booted, or the last alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.
OBJECT-TYPE    
  RowPointer  

tmnxPortClearAlarms 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44
Setting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.
OBJECT-TYPE    
  TmnxActionType  

tmnxPortSFPVendorSerialNum 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45
tmnxPortSFPVendorSerialNum contains ASCII characters, defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortSFPVendorPartNum 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46
The vendor part number contains ASCII characters, defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortLastStateChanged 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48
The tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.
OBJECT-TYPE    
  TimeStamp  

tmnxPortNumChannels 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49
For SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPortNumChannels contains the total number of channels on the physical port. For all other entries in the tmnxPortTable, the value of this object will be zero.
OBJECT-TYPE    
  Unsigned32  

tmnxPortNetworkEgrQueues 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50
tmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortBundleNumber 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51
tmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.
OBJECT-TYPE    
  INTEGER 0..1280  

tmnxPortIsLeaf 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52
tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.
OBJECT-TYPE    
  TruthValue  

tmnxPortChanType 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53
tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object will be 'unknown'.
OBJECT-TYPE    
  TmnxMDAChanType  

tmnxPortParentPortID 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54
tmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.
OBJECT-TYPE    
  TmnxPortID  

tmnxPortOpticalCompliance 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55
tmnxPortOpticalCompliance is applicable only when the tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.
OBJECT-TYPE    
  OCTET STRING SIZE(8)  

tmnxPortLoadBalanceAlgorithm 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56
The value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.
OBJECT-TYPE    
  INTEGER notApplicable(0), default(1), includeL4(2), excludeL4(3)  

tmnxPortEgrPortSchedPlcy 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57
The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortLastClearedTime 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58
The value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.
OBJECT-TYPE    
  TimeStamp  

tmnxPortIngNamedPoolPlcy 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60
The value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortEgrNamedPoolPlcy 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61
The value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortIngPoolPercentRate 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62
The value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.
OBJECT-TYPE    
  Unsigned32 1..1000  

tmnxPortEgrPoolPercentRate 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63
The value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.
OBJECT-TYPE    
  Unsigned32 1..1000  

tmnxPortDDMEventSuppression 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64
The value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).
OBJECT-TYPE    
  TruthValue  

tmnxPortSFPStatus 1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65
The value of tmnxPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tmnxPortSFPStatus indicates a failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.
OBJECT-TYPE    
  INTEGER not-equipped(0), operational(1), read-error(2), data-corrupt(3), ddm-corrupt(4), unsupported(5)  

tmnxPortTestTable 1.3.6.1.4.1.6527.3.1.2.2.4.3
The tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortTestEntry

tmnxPortTestEntry 1.3.6.1.4.1.6527.3.1.2.2.4.3.1
Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations.
OBJECT-TYPE    
  TmnxPortTestEntry  

tmnxPortTestState 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1
The current testing status of this port.
OBJECT-TYPE    
  INTEGER notInTest(1), inTest(2)  

tmnxPortTestMode 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2
The type of test to be executed on this port.
OBJECT-TYPE    
  INTEGER notApplicable(0), loopback1(1), loopback2(2), loopback3(3), singalInsertion(4)  

tmnxPortTestParameter 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3
A parameter to be passed to the test program.
OBJECT-TYPE    
  Unsigned32  

tmnxPortTestLastResult 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4
The status of the last test executed on this port.
OBJECT-TYPE    
  INTEGER notApplicable(0), success(1), failure(2), timeout(3)  

tmnxPortTestStartTime 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5
The date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.
OBJECT-TYPE    
  DateAndTime  

tmnxPortTestEndTime 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6
The date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.
OBJECT-TYPE    
  DateAndTime  

tmnxPortTestDuration 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7
The number of seconds the port test is anticipated to last.
OBJECT-TYPE    
  INTEGER 0..256  

tmnxPortTestAction 1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8
The operator sets this variable to perform the appropriate type of testing.
OBJECT-TYPE    
  INTEGER none(1), startTest(2), stopTest(3)  

tmnxPortEtherTable 1.3.6.1.4.1.6527.3.1.2.2.4.4
The tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortEtherEntry

tmnxPortEtherEntry 1.3.6.1.4.1.6527.3.1.2.2.4.4.1
Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
OBJECT-TYPE    
  TmnxPortEtherEntry  

tmnxPortEtherMTU 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1
The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tmnxPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode network
OBJECT-TYPE    
  Unsigned32 0 | 512..9212  

tmnxPortEtherDuplex 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2
The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tmnxPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.
OBJECT-TYPE    
  INTEGER notApplicable(0), fullDuplex(1), halfDuplex(2)  

tmnxPortEtherSpeed 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3
The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tmnxPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.
OBJECT-TYPE    
  INTEGER notApplicable(0), speed10(1), speed100(2), speed1000(3), speed10000(4)  

tmnxPortEtherAutoNegotiate 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4
When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively.
OBJECT-TYPE    
  INTEGER notApplicable(0), true(1), false(2), limited(3)  

tmnxPortEtherOperDuplex 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5
The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tmnxPortEtherOperDuplex is only valid if tmnxPortClass is 'faste' or 'xcme'.
OBJECT-TYPE    
  INTEGER notApplicable(0), fullDuplex(1), halfDuplex(2)  

tmnxPortEtherOperSpeed 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6
The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tmnxPortEtherOperSpeed is only valid if tmnxPortClass is one of the Ethernet classes.
OBJECT-TYPE    
  Unsigned32  

tmnxPortEtherAcctPolicyId 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7
The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
OBJECT-TYPE    
  Unsigned32 0..99  

tmnxPortEtherCollectStats 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8
Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherMDIMDIX 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9
The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if tmnxPortClass is 'faste' or 'xcme'.
OBJECT-TYPE    
  INTEGER unknown(0), mdi(1), mdix(2)  

tmnxPortEtherXGigMode 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10
The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.
OBJECT-TYPE    
  INTEGER notApplicable(0), lan(1), wan(2)  

tmnxPortEtherEgressRate 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11
The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
OBJECT-TYPE    
  Integer32 -1 | 1..10000000  

tmnxPortEtherDot1qEtype 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12
The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.
OBJECT-TYPE    
  Unsigned32 '600'H..'ffff'H  

tmnxPortEtherQinqEtype 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13
The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.
OBJECT-TYPE    
  Unsigned32 '600'H..'ffff'H  

tmnxPortEtherIngressRate 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14
The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
OBJECT-TYPE    
  Integer32 -1 | 1..10000  

tmnxPortEtherReportAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15
The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.
OBJECT-TYPE    
  TmnxPortEtherReportStatus  

tmnxPortEtherReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16
The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.
OBJECT-TYPE    
  TmnxPortEtherReportStatus  

tmnxPortEtherPkts1519toMax 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17
The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
OBJECT-TYPE    
  Counter32  

tmnxPortEtherHCOverPkts1519toMax 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18
The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.
OBJECT-TYPE    
  Counter32  

tmnxPortEtherHCPkts1519toMax 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19
The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax.
OBJECT-TYPE    
  Counter64  

tmnxPortEtherLacpTunnel 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20
The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherDownWhenLoopedEnabled 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21
The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tmnxPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tmnxPortState 'up' for a period of time defined by tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tmnxPortEtherDownWhenLoopedRetry.
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherDownWhenLoopedKeepAlive 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22
The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.
OBJECT-TYPE    
  Unsigned32 1..120  

tmnxPortEtherDownWhenLoopedRetry 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23
The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not set tmnxPortState to 'up' until the user administratively disables and re-enables the port by setting tmnxPortAdminStatus to 'outOfService' and then to 'inService'.
OBJECT-TYPE    
  Unsigned32 0 | 10..160  

tmnxPortEtherDownWhenLoopedState 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24
The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.
OBJECT-TYPE    
  INTEGER noLoopDetected(1), loopDetected(2)  

tmnxPortEtherPBBEtype 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25
The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.
OBJECT-TYPE    
  Unsigned32 '600'H..'ffff'H  

tmnxPortEtherReasonDownFlags 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26
The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'
OBJECT-TYPE    
  BITS unknown(0), linklossFwd(1)  

tmnxSonetTable 1.3.6.1.4.1.6527.3.1.2.2.4.5
The tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxSonetEntry

tmnxSonetEntry 1.3.6.1.4.1.6527.3.1.2.2.4.5.1
Each row entry represents a packet over Sonet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. The tmnxSonetEntry contains attributes that are unique to the 'sonet' TmnxPortType. It also contains attributes that are common to all sonet paths configured on a sonet port. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. All entries in this table have the sonet path number part of their tmnxPortPortID index value set to zero.
OBJECT-TYPE    
  TmnxSonetEntry  

tmnxSonetSpeed 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1
The rate of this optical facility.
OBJECT-TYPE    
  INTEGER oc3(1), oc12(2), oc48(3), oc192(4), oc768(5), oc1(6)  

tmnxSonetClockSource 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2
tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').
OBJECT-TYPE    
  INTEGER loopTimed(1), nodeTimed(2)  

tmnxSonetFraming 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3
The value of tmnxSonetFraming indicates the type of framing used on this interface.
OBJECT-TYPE    
  INTEGER unknown(1), sonet(2), sdh(3)  

tmnxSonetReportAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4
The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.
OBJECT-TYPE    
  BITS notUsed(0), loc(1), lais(2), lrdi(3), ss1f(4), sb1err(5), lb2erSd(6), lb2erSf(7), slof(8), slos(9), stxptr(10), srxptr(11), lrei(12)  

tmnxSonetBerSdThreshold 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5
The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BER SD failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
OBJECT-TYPE    
  Unsigned32 3..9  

tmnxSonetBerSfThreshold 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6
The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BER SF failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
OBJECT-TYPE    
  Unsigned32 3..6  

tmnxSonetAps 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TruthValue  

tmnxSonetApsAdminStatus 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TmnxPortAdminStatus  

tmnxSonetApsOperStatus 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TmnxPortOperStatus  

tmnxSonetApsAuthKey 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

tmnxSonetApsNeighborAddr 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  IpAddress  

tmnxSonetApsAdvertiseInterval 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TimeInterval  

tmnxSonetApsAdvertiseTimeLeft 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TimeInterval  

tmnxSonetApsHoldTime 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TimeInterval  

tmnxSonetApsHoldTimeLeft 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15
Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OBJECT-TYPE    
  TimeInterval  

tmnxSonetLoopback 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16
Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.
OBJECT-TYPE    
  INTEGER none(0), line(1), internal(2)  

tmnxSonetReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17
The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
OBJECT-TYPE    
  BITS notUsed(0), loc(1), lais(2), lrdi(3), ss1f(4), sb1err(5), lb2erSd(6), lb2erSf(7), slof(8), slos(9), stxptr(10), srxptr(11), lrei(12)  

tmnxSonetSectionTraceMode 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18
The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 byte is 0x01, and the z0 byte increments. If the mode is set to 'byte', then the j0 byte is the first octet of the tmnxSonetJ0String object and the z0 byte is 0xcc. If the mode is set to 'string', then the J0 byte is set to the 16 values in the tmnxSonetJ0String object and the z0 byte is 0xcc.
OBJECT-TYPE    
  INTEGER increment-z0(1), byte(2), string(3)  

tmnxSonetJ0String 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19
The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. If the mode is byte, then the first octet of this object is used for the J0 byte. If the mode is string, then the 16 bytes in this object are used for the J0 byte. If set to less than 16 bytes it, will be padded out to 16 with zeros. The default value is 0x01 and 15 NULLs
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

tmnxSonetMonS1Byte 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20
The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronization`. Other values are documented in Tellcordia GR253 and ITU G.707
OBJECT-TYPE    
  Unsigned32 0..255  

tmnxSonetMonJ0String 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21
The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

tmnxSonetMonK1Byte 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22
The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.
OBJECT-TYPE    
  Unsigned32 0..255  

tmnxSonetMonK2Byte 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23
The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.
OBJECT-TYPE    
  Unsigned32 0..255  

tmnxSonetSingleFiber 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24
tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.
OBJECT-TYPE    
  TruthValue  

tmnxSonetHoldTimeUp 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25
The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately.
OBJECT-TYPE    
  Unsigned32 0..100  

tmnxSonetHoldTimeDown 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26
The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately.
OBJECT-TYPE    
  Unsigned32 0..100  

tmnxSonetPathTable 1.3.6.1.4.1.6527.3.1.2.2.4.6
The tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxSonetPathEntry

tmnxSonetPathEntry 1.3.6.1.4.1.6527.3.1.2.2.4.6.1
Each row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable.
OBJECT-TYPE    
  TmnxSonetPathEntry  

tmnxSonetPathRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1
tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable for this sonet path port.
OBJECT-TYPE    
  RowStatus  

tmnxSonetPathLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2
The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.
OBJECT-TYPE    
  TimeStamp  

tmnxSonetPathMTU 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3
The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxSonetPathMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 1506 with mode access and encap-type mplscp 1524 with mode access and encap-type atm 9208 with mode network
OBJECT-TYPE    
  Unsigned32 0 | 512..9208  

tmnxSonetPathScramble 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4
If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set to 'false', scrambling is disabled. The default value for non-ATM paths is 'false'. The default value for ATM paths is 'true' If the value of tmnxSonetPathC2Byte is set to the default for the currently configured tmnxSonetPathScramble, then changing the value of tmnxSonetPathScramble for non-ATM paths causes a change to tmnxSonetPathC2Byte to a default value for a new scrambling option. The default values are as follows: scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16 unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCF
OBJECT-TYPE    
  TruthValue  

tmnxSonetPathC2Byte 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5
The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object.
OBJECT-TYPE    
  Unsigned32 0..254  

tmnxSonetPathJ1String 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6
The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded with NULLs. For SONET framing, an additional CR (0x0D) / LF (0x0A) pair will be added by the driver. For SDH framing only 16 bytes are sent in the J1 bytes. The driver will set the MSB of the first byte, and put the first 15 bytes of the user configured string as the following bytes. The driver will set the CRC-7 of the 16 bytes into the other 7 bits of the first byte. The default value is `Alcatel 7x50 SR`. Setting a 1-byte long string containing 0xFF will restore the default. Setting the string 'zeros' will send all-zeros (ASCII NULL characters without CR/LF or CRC-7)in the J1 bytes.
OBJECT-TYPE    
  OCTET STRING SIZE(0..62)  

tmnxSonetPathCRC 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7
The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path.
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

tmnxSonetPathOperMTU 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8
The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path.
OBJECT-TYPE    
  Unsigned32  

tmnxSonetPathOperMRU 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9
The negotiated size of the largest packet that can be received on the sonet path, specified in octets.
OBJECT-TYPE    
  Unsigned32  

tmnxSonetPathReportAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10
The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
OBJECT-TYPE    
  BITS notUsed(0), pais(1), plop(2), prdi(3), pb3err(4), pplm(5), prei(6), puneq(7), plcd(8)  

tmnxSonetPathAcctPolicyId 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11
The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
OBJECT-TYPE    
  Unsigned32 0..99  

tmnxSonetPathCollectStats 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12
Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
OBJECT-TYPE    
  TruthValue  

tmnxSonetPathReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13
The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
OBJECT-TYPE    
  BITS notUsed(0), pais(1), plop(2), prdi(3), pb3err(4), pplm(5), prei(6), puneq(7), plcd(8)  

tmnxSonetPathMonC2Byte 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14
The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte.
OBJECT-TYPE    
  Unsigned32 0..255  

tmnxSonetPathMonJ1String 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15
The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.
OBJECT-TYPE    
  OCTET STRING SIZE(0..64)  

tmnxSonetPathType 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16
tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - Configures the port or channel as service access(e3) vtg - Configures the path as a virtual tributary group. tug-2 - Configures the path as a tributary unit group. tug-3 - Configures the port or channel for transport network use.
OBJECT-TYPE    
  INTEGER ds3(1), e3(2), vtg(3), tug-2(4), tug-3(5)  

tmnxSonetPathChildType 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17
tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child path types are sonetSts3, sdhTug3, pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1.
OBJECT-TYPE    
  TmnxMDAChanType  

tmnxPortTypeTable 1.3.6.1.4.1.6527.3.1.2.2.4.7
The Port type table has an entry for each Alcatel 7x50 SR series port model.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortTypeEntry

tmnxPortTypeEntry 1.3.6.1.4.1.6527.3.1.2.2.4.7.1
Each row entry represents an Alcatel 7x50 SR series port model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
OBJECT-TYPE    
  TmnxPortTypeEntry  

tmnxPortTypeIndex 1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1
The unique index value which identifies this type of Alcatel 7x50 SR series port model.
OBJECT-TYPE    
  TmnxPortType  

tmnxPortTypeName 1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2
The administrative name that identifies this type of Alcatel 7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortTypeDescription 1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3
A detailed description of this Alcatel 7x50 SR series port model.
OBJECT-TYPE    
  TItemDescription  

tmnxPortTypeStatus 1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4
When tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.
OBJECT-TYPE    
  TruthValue  

tmnxPortConnectTypeTable 1.3.6.1.4.1.6527.3.1.2.2.4.8
The Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortConnectTypeEntry

tmnxPortConnectTypeEntry 1.3.6.1.4.1.6527.3.1.2.2.4.8.1
Each row entry represents an Alcatel 7x50 SR series port Connector model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
OBJECT-TYPE    
  TmnxPortConnectTypeEntry  

tmnxPortConnectTypeIndex 1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1
The unique index value which identifies this type of Alcatel 7x50 SR series port connector model.
OBJECT-TYPE    
  TmnxPortConnectorType  

tmnxPortConnectTypeName 1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2
The administrative name that identifies this type of Alcatel 7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortConnectTypeDescription 1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3
A detailed description of this Alcatel 7x50 SR series port connector model.
OBJECT-TYPE    
  TItemDescription  

tmnxPortConnectTypeStatus 1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4
When tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.
OBJECT-TYPE    
  TruthValue  

tmnxPortFCStatsTable 1.3.6.1.4.1.6527.3.1.2.2.4.9
The Network Port FC Stats table has an entry for each forwarding class defined on each network port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortNetworkFCStatsEntry

tmnxPortFCStatsEntry 1.3.6.1.4.1.6527.3.1.2.2.4.9.1
Each row entry represents a set of ingress and egress packet and octet statistics for the given network port and forwarding class. Rows in this table are created by the agent when the network port is provisioned and cannot be created or destroyed by SNMP Get or Set requests.
OBJECT-TYPE    
  TmnxPortNetworkFCStatsEntry  

tmnxPortFCStatsIndex 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1
The forwarding class associated with these stats on this network port.
OBJECT-TYPE    
  TFCName  

tmnxPortFCStatsIngFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2
The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4
The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngDroInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6
The number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngDroOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7
The number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngDroInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8
The number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsIngDroOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9
The number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10
The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11
The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12
The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13
The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrDroInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14
The number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrDroOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15
The number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrDroInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16
The number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxPortFCStatsEgrDroOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17
The number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
OBJECT-TYPE    
  Counter64  

tmnxDS3Table 1.3.6.1.4.1.6527.3.1.2.2.4.10
The tmnxDS3Table has an entry for a DS3 physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDS3Entry

tmnxDS3Entry 1.3.6.1.4.1.6527.3.1.2.2.4.10.1
Each row entry represents a physical DS3 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS3 MDA type The tmnxDS3Entry contains attributes that are unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxDS3Entry  

tmnxDS3Buildout 1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1
tmnxDS3Buildout configures the T3 line buildout. A T3 port has two settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object applies to copper-cable-based T3 ports only.
OBJECT-TYPE    
  INTEGER short(1), long(2)  

tmnxDS3LastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2
The tmnxDS3LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3Entry row for this port.
OBJECT-TYPE    
  TimeStamp  

tmnxDS3Type 1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3
tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.
OBJECT-TYPE    
  INTEGER ds3(1), e3(2)  

tmnxDS3ChannelTable 1.3.6.1.4.1.6527.3.1.2.2.4.11
The tmnxDS3ChannelTable has an entry for a DS3 channel.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDS3ChannelEntry

tmnxDS3ChannelEntry 1.3.6.1.4.1.6527.3.1.2.2.4.11.1
Each row entry represents a DS3 channel. Entries can be created and deleted via SNMP SET operations. The tmnxDS3ChannelEntry contains attributes that are applicable to a DS3 channel which can belong to the DS3 physical port or belong to a container on a sonet path. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3ChannelEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxDS3ChannelEntry  

tmnxDS3ChannelRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1
tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
OBJECT-TYPE    
  RowStatus  

tmnxDS3ChannelType 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2
The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode.
OBJECT-TYPE    
  INTEGER ds3(1), e3(2)  

tmnxDS3ChannelFraming 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3
The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'.
OBJECT-TYPE    
  INTEGER cbit(1), m23(2), g751(3), g832(4)  

tmnxDS3ChannelClockSource 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4
tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed').
OBJECT-TYPE    
  TmnxDSXClockSource  

tmnxDS3ChannelChannelized 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5
tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface.
OBJECT-TYPE    
  INTEGER none(1), ds1(2), e1(3), j1(4)  

tmnxDS3ChannelSubrateCSUMode 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6
tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided.
OBJECT-TYPE    
  INTEGER notUsed(0), digital-link(1)  

tmnxDS3ChannelSubrate 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7
tmnxDS3ChannelSubrate configures the subrate step. tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbps. ----------------------------------------------------------------------- Subrate CSU Mode|Granularity|Default |Range |Subrate speed range ----------------------------------------------------------`------------- notUsed | N/A | 0 | 0 |N/A digital-link | 301 kbps | 1 | 1 to 147 |301 kbps to 44.2 mbps -----------------------------------------------------------------------
OBJECT-TYPE    
  Unsigned32  

tmnxDS3ChannelIdleCycleFlags 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8
tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
OBJECT-TYPE    
  TmnxDSXIdleCycleFlags  

tmnxDS3ChannelLoopback 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9
tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.
OBJECT-TYPE    
  TmnxDS3Loopback  

tmnxDS3ChannelBitErrorInsertionRate 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10
tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, it disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
OBJECT-TYPE    
  Integer32 0 | 2..7  

tmnxDS3ChannelBERTPattern 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11
tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates the test.
OBJECT-TYPE    
  TmnxDSXBertPattern  

tmnxDS3ChannelBERTDuration 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12
tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test.
OBJECT-TYPE    
  Unsigned32 0..86400  

tmnxDS3ChannelMDLEicString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13
tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL).
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

tmnxDS3ChannelMDLLicString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14
tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL).
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

tmnxDS3ChannelMDLFicString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15
tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL).
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

tmnxDS3ChannelMDLUnitString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16
tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL).
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

tmnxDS3ChannelMDLPfiString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17
tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

tmnxDS3ChannelMDLPortString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18
tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

tmnxDS3ChannelMDLGenString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19
tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

tmnxDS3ChannelMDLMessageType 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20
tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element.
OBJECT-TYPE    
  BITS none(0), ds3Path(1), idleSignal(2), testSignal(3)  

tmnxDS3ChannelFEACLoopRespond 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21
When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
OBJECT-TYPE    
  TruthValue  

tmnxDS3ChannelCRC 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22
The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For ATM channels, crc32 is the default and the only value supported and applies to AAL5 CRC calculation on that channel.
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

tmnxDS3ChannelMTU 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23
The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
OBJECT-TYPE    
  Unsigned32 0 | 512..9208  

tmnxDS3ChannelOperMTU 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24
The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
OBJECT-TYPE    
  Unsigned32  

tmnxDS3ChannelReportAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25
The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS3/E3 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS3/E3 signal failure bit errors. berSf alarms are not issued by default
OBJECT-TYPE    
  TmnxDSXReportAlarm  

tmnxDS3ChannelReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26
The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port.
OBJECT-TYPE    
  TmnxDSXReportAlarm  

tmnxDS3ChannelLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27
The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port.
OBJECT-TYPE    
  TimeStamp  

tmnxDS3ChannelInFEACLoop 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28
tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback.
OBJECT-TYPE    
  TruthValue  

tmnxDS3ChannelMDLMonPortString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29
tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

tmnxDS3ChannelMDLMonGenString 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30
tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message.
OBJECT-TYPE    
  DisplayString SIZE(0..38)  

tmnxDS3ChannelBERTOperStatus 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31
tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
OBJECT-TYPE    
  TmnxDSXBertOperStatus  

tmnxDS3ChannelBERTSynched 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32
tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Unsigned32  

tmnxDS3ChannelBERTErrors 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33
tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Counter64  

tmnxDS3ChannelBERTTotalBits 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34
tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Counter64  

tmnxDS3ChannelScramble 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35
When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel and indicates ATM payload scrambling; otherwise (tmnxPortEncapType is not atmEncap) the default is 'false' and can only be changed to true if the value of tmnxDS3ChannelSubrateCSUMode is digital-link (1)
OBJECT-TYPE    
  TruthValue  

tmnxDS3ChannelAcctPolicyId 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36
The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel. A zero value indicates that there is no accounting policy associated with this channel
OBJECT-TYPE    
  Unsigned32 0..99  

tmnxDS3ChannelCollectStats 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37
The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
OBJECT-TYPE    
  TruthValue  

tmnxDS3ChannelClockSyncState 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38
The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
OBJECT-TYPE    
  TmnxDSXClockSyncState  

tmnxDS3ChannelClockMasterPortId 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39
The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
OBJECT-TYPE    
  TmnxPortID  

tmnxDS1Table 1.3.6.1.4.1.6527.3.1.2.2.4.12
The tmnxDS1Table has an entry for each DS1 channel.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDS1Entry

tmnxDS1Entry 1.3.6.1.4.1.6527.3.1.2.2.4.12.1
Each row entry represents a DS1 channel on a IOM card in a chassis in the system. DS1 channel entries for DS3 ports cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries for DS1 ports can be created and deleted via SNMP SET operations. For each tmnxDS1Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxDS1Entry  

tmnxDS1RowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1
tmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
OBJECT-TYPE    
  RowStatus  

tmnxDS1Type 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2
The value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode.
OBJECT-TYPE    
  INTEGER ds1(1), e1(2), j1(3)  

tmnxDS1Framing 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3
The value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 G.704 framing format for E1 interfaces. g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces. e1-unframed E1 Unframed (G.703) mode for E1 interfaces. ds1-unframed Unframed mode for T1 interfaces. If tmnxDS1Type is set to 'ds1', the default framing is 'esf'. If tmnxDS1Type is set to 'e1', the default framing is 'g704'. Changing the value of tmnxDS1Framing resets the values of tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults and turns off reporting of berSd and berSf alarms in tmnxDS1ReportAlarm.
OBJECT-TYPE    
  INTEGER esf(1), sf(2), g704-no-crc(3), g704(4), e1-unframed(5), ds1-unframed(6)  

tmnxDS1IdleCycleFlags 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4
tmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle.
OBJECT-TYPE    
  TmnxDSXIdleCycleFlags  

tmnxDS1Loopback 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5
tmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid with tmnxDS1Framing set to 'esf' framing. A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312. This is valid with tmnxDS1Framing set to 'esf'. A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is valid with tmnxDS1Framing set to 'sf'.
OBJECT-TYPE    
  TmnxDS1Loopback  

tmnxDS1InvertData 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6
Setting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI line encoding.
OBJECT-TYPE    
  TruthValue  

tmnxDS1BitErrorInsertionRate 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7
tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
OBJECT-TYPE    
  Integer32 0 | 2..7  

tmnxDS1BERTPattern 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8
tmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test.
OBJECT-TYPE    
  TmnxDSXBertPattern  

tmnxDS1BERTDuration 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9
tmnxDS1BERTDuration is used to set the duration of the BERT test.
OBJECT-TYPE    
  Unsigned32 0..86400  

tmnxDS1ReportAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10
The value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS1/E1/J1 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS1/E1/J1 signal failure bit errors. berSf alarms are not issued by default
OBJECT-TYPE    
  TmnxDSXReportAlarm  

tmnxDS1ReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11
The value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel.
OBJECT-TYPE    
  TmnxDSXReportAlarm  

tmnxDS1LastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12
The tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Entry row for this channel.
OBJECT-TYPE    
  TimeStamp  

tmnxDS1ClockSource 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13
tmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential').
OBJECT-TYPE    
  TmnxDSXClockSource  

tmnxDS1BERTOperStatus 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14
tmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
OBJECT-TYPE    
  TmnxDSXBertOperStatus  

tmnxDS1BERTSynched 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15
tmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Unsigned32  

tmnxDS1BERTErrors 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16
tmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Counter64  

tmnxDS1BERTTotalBits 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17
tmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
OBJECT-TYPE    
  Counter64  

tmnxDS1RemoteLoopRespond 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18
When tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
OBJECT-TYPE    
  TruthValue  

tmnxDS1InRemoteLoop 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19
tmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback.
OBJECT-TYPE    
  TruthValue  

tmnxDS1InsertSingleBitError 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20
tmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test.
OBJECT-TYPE    
  TmnxActionType  

tmnxDS1SignalMode 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21
The value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'.
OBJECT-TYPE    
  INTEGER none(1), cas(2)  

tmnxDS1ClockSyncState 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22
The value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'.
OBJECT-TYPE    
  TmnxDSXClockSyncState  

tmnxDS1ClockMasterPortId 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23
The value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'.
OBJECT-TYPE    
  TmnxPortID  

tmnxDS1BerSdThreshold 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24
The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER SD failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit error is computed and what values of tmnxDS1BerSdThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSdThreshold set to default and cannot be changed tmnxDS1BerSdThreshold value must not exceed the value of tmnxDS1BerSfThreshold.
OBJECT-TYPE    
  Unsigned32 1 | 5 | 10 | 50 | 100  

tmnxDS1BerSfThreshold 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25
The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
OBJECT-TYPE    
  Unsigned32 1 | 5 | 10 | 50 | 100  

tmnxDS0ChanGroupTable 1.3.6.1.4.1.6527.3.1.2.2.4.13
The tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDS0ChanGroupEntry

tmnxDS0ChanGroupEntry 1.3.6.1.4.1.6527.3.1.2.2.4.13.1
Each row entry represents one or more DS0 channels on a DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or remove DS0 channels from the group. Entries can be created and deleted via SNMP SET operations using the tmnxDS0ChanGroupRowStatus object. For each tmnxDS0ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxDS0ChanGroupEntry  

tmnxDS0ChanGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1
tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
OBJECT-TYPE    
  RowStatus  

tmnxDS0ChanGroupTimeSlots 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2
tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel group is created on unframed DS1/E1, all timeslots as applicable to a given speed are auto-allocated and cannot be changed. When a channel group is created on a framed DS1/E1 or existing channel group's encapsulation is changed from ATM, the default of no timeslots is auto-assigned to the group. When a channel group on a framed DS1/E1 is configured for ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1) and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.
OBJECT-TYPE    
  TmnxDs0ChannelList  

tmnxDS0ChanGroupSpeed 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3
tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group.
OBJECT-TYPE    
  INTEGER speed-56(1), speed-64(2)  

tmnxDS0ChanGroupCRC 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4
The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For channel groups with encapsulation set to ATM, the default and only supported value is crc32 and applies to AAL5 CRC calculations on that channel group.
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

tmnxDS0ChanGroupMTU 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5
The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
OBJECT-TYPE    
  Unsigned32 0 | 512..9208  

tmnxDS0ChanGroupOperMTU 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6
The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
OBJECT-TYPE    
  Unsigned32  

tmnxDS0ChanGroupLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7
The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group.
OBJECT-TYPE    
  TimeStamp  

tmnxDS0ChanGroupIdleCycleFlags 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8
tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
OBJECT-TYPE    
  TmnxDSXIdleCycleFlags  

tmnxDS0ChanGroupScramble 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9
tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel, otherwise the default is 'false' and not allowed to change.
OBJECT-TYPE    
  TruthValue  

tmnxDS0ChanGroupAcctPolicyId 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10
The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel-group. A zero value indicates that there is no accounting policy associated with this channel
OBJECT-TYPE    
  Unsigned32 0..99  

tmnxDS0ChanGroupCollectStats 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11
The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
OBJECT-TYPE    
  TruthValue  

tmnxDS0ChanGroupPayloadFillType 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12
The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' For a ds1-unframed and e1-unframed CEM encap DS0 channel group the only supported value is 'allOnes'. For non-CEM encap channel groups the value cannot be changed.
OBJECT-TYPE    
  TmnxDSXIdleFillType  

tmnxDS0ChanGroupPayloadPattern 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13
The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0).
OBJECT-TYPE    
  Unsigned32 0..255  

tmnxDS0ChanGroupSignalFillType 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14
The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupSignalPattern is used to define the signal pattern. The default value depends on the encap of the DS0 channel group and the signal-mode of the DS1/E1: For CEM encap on DS1/E1 with CAS signal mode - 'allOnes' For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable' For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM encap channel groups the value cannot be changed.
OBJECT-TYPE    
  TmnxDSXIdleFillType  

tmnxDS0ChanGroupSignalPattern 1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15
The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
OBJECT-TYPE    
  Unsigned32 0..15  

tmnxBundleTable 1.3.6.1.4.1.6527.3.1.2.2.4.14
The tmnxBundleTable has an entry for a bundle created on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBundleEntry

tmnxBundleEntry 1.3.6.1.4.1.6527.3.1.2.2.4.14.1
Each row entry represents a multilink bundle on a MDA. Entries can be created and deleted via SNMP SET operations using the tmnxBundleRowStatus object. The tmnxBundleBundleID will contain the bundle number encoded in it. The bundle number is unique for a MDA. For each tmnxBundleEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxBundleEntry  

tmnxBundleBundleID 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1
tmnxBundleBundleID identifies this multilink bundle. The value of this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmnxPortTable to access an entry corresponding to this entry.
OBJECT-TYPE    
  TmnxBundleID  

tmnxBundleRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2
tmnxBundleRowStatus controls the creation and deletion of row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding.
OBJECT-TYPE    
  RowStatus  

tmnxBundleType 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3
tmnxBundleType specifies the type of this multilink bundle. It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID.
OBJECT-TYPE    
  INTEGER mlppp(1), mlfr(2), imagrp(3)  




tmnxBundleMRRU 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7
tmnxBundleMRRU is used to configure the Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
OBJECT-TYPE    
  Unsigned32 0 | 1500..9206  

tmnxBundleOperMRRU 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8
tmnxBundleOperMRRU indicates the operational value of Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
OBJECT-TYPE    
  Unsigned32  

tmnxBundlePeerMRRU 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9
tmnxBundlePeerMRRU indicates the MRRU value sent by the peer during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
OBJECT-TYPE    
  Unsigned32  

tmnxBundleOperMTU 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10
tmnxBundleOperMTU indicates the operational MTU of the bundle.
OBJECT-TYPE    
  Unsigned32  

tmnxBundleRedDiffDelay 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11
tmnxBundleRedDiffDelay configures the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported, 0 to 25 otherwise.
OBJECT-TYPE    
  Unsigned32 0..25 | 0..50  

tmnxBundleRedDiffDelayAction 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12
tmnxBundleRedDiffDelayAction specifies the action to be taken when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supported.
OBJECT-TYPE    
  INTEGER none(0), down(1)  

tmnxBundleYellowDiffDelay 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13
tmnxBundleYellowDiffDelay configures the yellow warning threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued. This object is only applicable to tmnxBundleType values of 'mlppp' or 'mlfr'. All non applicable types have a value of zero.
OBJECT-TYPE    
  Unsigned32 0..25  

tmnxBundleShortSequence 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14
tmnxBundleShortSequence command specifies that the MLPPP bundle should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType values of mlppp.
OBJECT-TYPE    
  TruthValue  

tmnxBundleLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15
The tmnxBundleLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group.
OBJECT-TYPE    
  TimeStamp  

tmnxBundleFragmentThreshold 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16
The value of tmnxBundleFragmentThreshold specifies the maximum length of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragmentation. Currently, the following values are supported depending upon the tmnxBundleType value: tmnxBundleType tmnxBundleFragmentThreshold values supported mlppp 0; 128 to 512 inclusive imagrp 128
OBJECT-TYPE    
  Unsigned32 0 | 128..512  

tmnxBundleUpTime 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17
tmnxBundleUpTime indicates the time since the bundle is operationally 'inService'.
OBJECT-TYPE    
  Unsigned32  

tmnxBundleInputDiscards 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18
tmnxBundleInputDiscards indicates the number of LCP packets that were discarded. This object is only supported for a tmnxBundleType value of mlppp.
OBJECT-TYPE    
  Counter32  

tmnxBundlePrimaryMemberPortID 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19
tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary member of this bundle. The value of this object will be zero if there are no members configured in this bundle.
OBJECT-TYPE    
  TmnxPortID  

tmnxBundleLFI 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20
tmnxBundleLFI specifies if Link Fragmentation and Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a value of 'true' indicates that Link Fragmentation and Interleaving is enabled on the multilink bundle. This object is only supported for tmnxBundleType value of mlppp. The value of tmnxBundleLFI may be modified only when no members are part of the bundle. This object cannot be set to true when tmnxBundleMlpppClassCount object value is set to enable Multiclass MLPPP on the bundle.
OBJECT-TYPE    
  TruthValue  

tmnxBundleProtectedType 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21
tmnxBundleProtectedType identifies how this bundle is part of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle. tmnxBundleProtectedType can only be set at row creation.
OBJECT-TYPE    
  INTEGER none(0), working(1), protection(2)  

tmnxBundleParentBundle 1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22
tmnxBundleParentBundle specifies the parent to which this bundle belongs. A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its value is zero. tmnxBundleParentBundle can only be set at row creation.
OBJECT-TYPE    
  TmnxBundleID  

tmnxBundleMemberTable 1.3.6.1.4.1.6527.3.1.2.2.4.15
The tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBundleMemberEntry

tmnxBundleMemberEntry 1.3.6.1.4.1.6527.3.1.2.2.4.15.1
Each row represents a port associated with a bundle. Entries can be added or removed from this table using SNMP SET operation.
OBJECT-TYPE    
  TmnxBundleMemberEntry  

tmnxBundleMemberRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1
tmnxBundleMemberRowStatus controls the creation and deletion of row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has to exist in the tmnxBundleTable before creating an entry in this table.
OBJECT-TYPE    
  RowStatus  

tmnxBundleMemberActive 1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2
tmnxBundleMemberActive is set to 'false' for one of reasons in tmnxBundleMemberDownReason.
OBJECT-TYPE    
  TruthValue  

tmnxBundleMemberDownReason 1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3
tmnxBundleMemberDownReason contains the reason code for marking the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberActive is 'true'. outOfService - The link operational status is down. redDiffDelayExceeded - The differential delay of the link exceeded the configured value of red differential delay and tmnxBundleRedDiffDelayAction was configured as 'down'. mismatchEndPtDiscriminator - Detected inconsistent peer endpoint discriminator for the bundle. peerNotBundleMember - When the peer is either not added to the bundle or is removed from the bundle. underNegotiation - When the local end is trying to negotiate with the peer. peerInvalidMlHdrFmt - The peer does not support the required ML-PPP header format. The remote peer must support the same short/long sequence code, and at least as many classes as configured for the local bundle.
OBJECT-TYPE    
  INTEGER none(0), outOfService(1), redDiffDelayExceeded(2), mismatchEndPtDiscriminator(3), peerNotBundleMember(4), underNegotiation(5), peerInvalidMlHdrFmt(6)  

tmnxBundleMemberUpTime 1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4
tmnxBundleMemberUpTime indicates the time since the bundle member is active as indicated by tmnxBundleMemberActive.
OBJECT-TYPE    
  Unsigned32  

tmnxPortToChannelTable 1.3.6.1.4.1.6527.3.1.2.2.4.16
The tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortToChannelEntry

tmnxPortToChannelEntry 1.3.6.1.4.1.6527.3.1.2.2.4.16.1
Each row represents a mapping of the physical port index and the channel index string to the index of the channel.
OBJECT-TYPE    
  TmnxPortToChannelEntry  

tmnxChannelIdxString 1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1
tmnxChannelIdxString is an index into the table. It contains a string identifying a channel on the physical port.
OBJECT-TYPE    
  DisplayString  

tmnxChannelPortID 1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2
tmnxChannelPortID contains the port ID of the channel. This value is used to identify the entry for this channel in the ifTable or the tmnxPortTable.
OBJECT-TYPE    
  TmnxPortID  

tmnxPortIngrMdaQosStatTable 1.3.6.1.4.1.6527.3.1.2.2.4.17
The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortIngrMdaQosStatEntry

tmnxPortIngrMdaQosStatEntry 1.3.6.1.4.1.6527.3.1.2.2.4.17.1
Each row entry indicates the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA. tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates the ingress rate configured for the port.
OBJECT-TYPE    
  TmnxPortIngrMdaQosStatEntry  

tmnxPortIngrMdaQos00StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1
tmnxPortIngrMdaQos00StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos00StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2
tmnxPortIngrMdaQos00StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos01StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3
tmnxPortIngrMdaQos01StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos01StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4
tmnxPortIngrMdaQos01StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos02StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5
tmnxPortIngrMdaQos02StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos02StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6
tmnxPortIngrMdaQos02StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos03StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7
tmnxPortIngrMdaQos03StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos03StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8
tmnxPortIngrMdaQos03StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos04StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9
tmnxPortIngrMdaQos04StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos04StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10
tmnxPortIngrMdaQos04StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos05StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11
tmnxPortIngrMdaQos05StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos05StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12
tmnxPortIngrMdaQos05StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos06StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13
tmnxPortIngrMdaQos06StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos06StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14
tmnxPortIngrMdaQos06StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos07StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15
tmnxPortIngrMdaQos07StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos07StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16
tmnxPortIngrMdaQos07StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos08StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17
tmnxPortIngrMdaQos08StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos08StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18
tmnxPortIngrMdaQos08StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos09StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19
tmnxPortIngrMdaQos09StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos09StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20
tmnxPortIngrMdaQos09StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos10StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21
tmnxPortIngrMdaQos10StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos10StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22
tmnxPortIngrMdaQos10StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos11StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23
tmnxPortIngrMdaQos11StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos11StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24
tmnxPortIngrMdaQos11StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos12StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25
tmnxPortIngrMdaQos12StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos12StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26
tmnxPortIngrMdaQos12StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos13StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27
tmnxPortIngrMdaQos13StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos13StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28
tmnxPortIngrMdaQos13StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos14StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29
tmnxPortIngrMdaQos14StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos14StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30
tmnxPortIngrMdaQos14StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos15StatDropPkts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31
tmnxPortIngrMdaQos15StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxPortIngrMdaQos15StatDropOcts 1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32
tmnxPortIngrMdaQos15StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
OBJECT-TYPE    
  Counter64  

tmnxSonetGroupTable 1.3.6.1.4.1.6527.3.1.2.2.4.18
The tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxSonetGroupEntry

tmnxSonetGroupEntry 1.3.6.1.4.1.6527.3.1.2.2.4.18.1
Each row entry represents a Tributary Unit Group(TUG3) on a path.
OBJECT-TYPE    
  TmnxSonetGroupEntry  

tmnxSonetGroupType 1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1
tmnxSonetGroupType indicates the sonet group type of this entry. For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'.
OBJECT-TYPE    
  TmnxMDAChanType  

tmnxSonetGroupParentPortID 1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2
tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of this group.
OBJECT-TYPE    
  TmnxPortID  

tmnxSonetGroupChildType 1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3
tmnxSonetGroupChildType is used to configure the type of the children of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the value of this object is set to 'sonetVt15', then 28 entries of type 'sonetVt15' can be created in the tmnxSonetPathTable.
OBJECT-TYPE    
  TmnxMDAChanType  

tmnxSonetGroupName 1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4
tmnxSonetGroupName is the textual name for this sonet group.
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortScalarObjs 1.3.6.1.4.1.6527.3.1.2.2.4.19
OBJECT IDENTIFIER    

tmnxL4LoadBalancing 1.3.6.1.4.1.6527.3.1.2.2.4.19.1
The value of tmnxL4LoadBalancing specifies whether layer 4 information, src and dst ports, should be used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', src and dst ports are used in the hashing algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can override tmnxL4LoadBalancing.
OBJECT-TYPE    
  TruthValue  

tmnxCiscoHDLCTable 1.3.6.1.4.1.6527.3.1.2.2.4.20
The tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxCiscoHDLCEntry

tmnxCiscoHDLCEntry 1.3.6.1.4.1.6527.3.1.2.2.4.20.1
The tmnxCiscoHDLCEntry specifies parameters for a particular interfaces running Cisco HDLC encapsulation. Entries cannot be created and deleted via SNMP SET operations.
OBJECT-TYPE    
  TmnxCiscoHDLCEntry  

tmnxCiscoHDLCKeepAliveInt 1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1
tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
OBJECT-TYPE    
  Unsigned32 0..300  

tmnxCiscoHDLCUpCount 1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2
tmnxCiscoHDLCUpCount specifies the number of continual keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
OBJECT-TYPE    
  Unsigned32 1..3  

tmnxCiscoHDLCDownCount 1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3
tmnxCiscoHDLCDownCount specifies the number of 'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
OBJECT-TYPE    
  Unsigned32 3..16  

tmnxCiscoHDLCOperState 1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4
The value of tmnxCiscoHDLCOperState indicates the operational status of the Cisco HDLC protocol for this port.
OBJECT-TYPE    
  TmnxOperState  

tmnxBundleImaGrpTable 1.3.6.1.4.1.6527.3.1.2.2.4.21
The tmnxBundleImaGrpTable contains IMA Group data
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBundleImaGrpEntry

tmnxBundleImaGrpEntry 1.3.6.1.4.1.6527.3.1.2.2.4.21.1
Each row entry contains data on an IMA Group.
OBJECT-TYPE    
  TmnxBundleImaGrpEntry  

tmnxBundleImaGrpLnkActTimer 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1
tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activated.
OBJECT-TYPE    
  Unsigned32 1..30000  

tmnxBundleImaGrpLnkDeactTimer 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2
tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated.
OBJECT-TYPE    
  Unsigned32 1..30000  

tmnxBundleImaGrpSymmetryMode 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3
tmnxBundleImaGrpSymmetryMode specifies the type of cell rate transfer over the virtual link.
OBJECT-TYPE    
  INTEGER symmetric(1)  

tmnxBundleImaGrpTxId 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4
tmnxBundleImaGrpTxId specifies the IMA Id generated at group creation time used by the near-end.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpRxId 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5
tmnxBundleImaGrpRxId specifies the IMA ID generated at group creation time used by the far-end.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpTxRefLnk 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6
tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned.
OBJECT-TYPE    
  TmnxPortID  

tmnxBundleImaGrpRxRefLnk 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7
tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned.
OBJECT-TYPE    
  TmnxPortID  

tmnxBundleImaGrpSmNeState 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8
tmnxBundleImaGrpSmNeState specifies the current state of the IMA Group for the near-end.
OBJECT-TYPE    
  TmnxImaGrpState  

tmnxBundleImaGrpSmFeState 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9
tmnxBundleImaGrpSmFeState specifies the current state of the IMA Group for the far-end.
OBJECT-TYPE    
  TmnxImaGrpState  

tmnxBundleImaGrpSmFailState 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10
tmnxBundleImaGrpSmFailState specifies the current state of the IMA Group.
OBJECT-TYPE    
  TmnxImaGrpFailState  

tmnxBundleImaGrpSmDownSecs 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11
tmnxBundleImaGrpSmDownSecs specifies the number of seconds that the IMA Group State Machine is not Operational.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpSmOperSecs 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12
tmnxBundleImaGrpSmOperSecs specifies the number of seconds that the IMA Group State Machine has been in the Operational State.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpAvailTxCR 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13
tmnxBundleImaGrpAvailTxCR specifies the available transmit bandwidth on this IMA group. It only considers members that are in the Active State.
OBJECT-TYPE    
  Gauge32  

tmnxBundleImaGrpAvailRxCR 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14
tmnxBundleImaGrpAvailRxCR specifies the available bandwidth on this IMA group in the receive direction. It only considers members that are in the Active State.
OBJECT-TYPE    
  Gauge32  

tmnxBundleImaGrpNeFails 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15
tmnxBundleImaGrpNeFails specifies the number of reported IMA Group failures since boot time.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpFeFails 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16
tmnxBundleImaGrpFeFails specifies the number of reported IMA Group far-end failures since boot time.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpTxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17
tmnxBundleImaGrpTxIcpCells specifies number of transmitted ICP cells for this IMA Group.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpRxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18
tmnxBundleImaGrpRxIcpCells specifies number of received ICP cells for this IMA Group.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpErrorIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19
tmnxBundleImaGrpErrorIcpCells specifies number of ICP cells with HEC or CRC-10 errors.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpLostRxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20
tmnxBundleImaGrpLostRxIcpCells specifies the number of missing ICP cells at the expected offset.
OBJECT-TYPE    
  Counter32  

tmnxBundleImaGrpTxOamLablVal 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21
tmnxBundleImaGrpTxOamLablVal specifies near-end value to be transmitted.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpRxOamLablVal 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22
tmnxBundleImaGrpRxOamLablVal specifies far-end value received.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpAlphaValue 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23
tmnxBundleImaGrpAlphaValue specifies the number of consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpBetaValue 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24
tmnxBundleImaGrpBetaValue specifies the number of consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpGammaValue 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25
tmnxBundleImaGrpGammaValue specifies the number of consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State.
OBJECT-TYPE    
  INTEGER  

tmnxBundleImaGrpNeClockMode 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26
tmnxBundleImaGrpNeClockMode specifies near-end transmit clock mode.
OBJECT-TYPE    
  TmnxImaGrpClockModes  

tmnxBundleImaGrpFeClockMode 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27
tmnxBundleImaGrpFeClockMode specifies far-end transmit clock mode.
OBJECT-TYPE    
  TmnxImaGrpClockModes  

tmnxBundleImaGrpVersion 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28
tmnxBundleImaGrpVersion specifies the IMA Version for this group.
OBJECT-TYPE    
  TmnxImaGrpVersion  

tmnxBundleImaGrpMaxConfBw 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29
tmnxBundleImaGrpMaxConfBw specifies the number of links that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group.
OBJECT-TYPE    
  Unsigned32 1..8  

tmnxBundleImaGrpTestState 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30
tmnxBundleImaGrpTestState specifies the current state of the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure. The test pattern procedure continues until it is 'disabled'.
OBJECT-TYPE    
  TmnxImaTestState  

tmnxBundleImaGrpTestMember 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31
tmnxBundleImaGrpTestMember specifies a member link to be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not have the value 'disabled', an attempt to set this object will be rejected with an inconsistentValue error.
OBJECT-TYPE    
  TmnxPortID  

tmnxBundleImaGrpTestPattern 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32
tmnxBundleImaGrpTestPattern specifies the Transmit Test Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'.
OBJECT-TYPE    
  INTEGER 0..255  

tmnxBundleImaGrpDiffDelayMaxObs 1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33
tmnxBundleImaGrpDiffDelayMaxObs indicates the latest maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group.
OBJECT-TYPE    
  Unsigned32  


tmnxBundleMemberImaTable 1.3.6.1.4.1.6527.3.1.2.2.4.22
The tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBundleMemberImaEntry

tmnxBundleMemberImaEntry 1.3.6.1.4.1.6527.3.1.2.2.4.22.1
Each row entry represents an IMA link associated with an IMA Group.
OBJECT-TYPE    
  TmnxBundleMemberImaEntry  

tmnxBundleMemberImaNeTxState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1
tmnxBundleMemberImaNeTxState indicates the state of near-end transmit IMA link.
OBJECT-TYPE    
  TmnxImaLnkState  

tmnxBundleMemberImaNeRxState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2
tmnxBundleMemberImaNeRxState indicates the state of near-end receive IMA link.
OBJECT-TYPE    
  TmnxImaLnkState  

tmnxBundleMemberImaFeTxState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3
tmnxBundleMemberImaFeTxState indicates the state of far-end transmit IMA link.
OBJECT-TYPE    
  TmnxImaLnkState  

tmnxBundleMemberImaFeRxState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4
tmnxBundleMemberImaFeRxState indicates the state of far-end receive IMA link.
OBJECT-TYPE    
  TmnxImaLnkState  

tmnxBundleMemberImaNeRxFailState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5
tmnxBundleMemberImaNeRxFailState indicates the IMA link failure reason for the near-end.
OBJECT-TYPE    
  TmnxImaLnkFailState  

tmnxBundleMemberImaFeRxFailState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6
tmnxBundleMemberImaFeRxFailState indicates the IMA link failure reason for the far-end.
OBJECT-TYPE    
  TmnxImaLnkFailState  

tmnxBundleMemberImaTxLid 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7
tmnxBundleMemberImaTxLid indicates the Link Identifier assigned to the transmit IMA link.
OBJECT-TYPE    
  INTEGER  

tmnxBundleMemberImaRxLid 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8
tmnxBundleMemberImaRxLid indicates the Link Identifier used on the receive IMA link.
OBJECT-TYPE    
  INTEGER  

tmnxBundleMemberImaViolations 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9
tmnxBundleMemberImaViolations indicates the number of ICP violations including errored, invalid or missing ICP cells.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeSevErrSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10
tmnxBundleMemberImaNeSevErrSecs indicates the number of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeSevErrSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11
tmnxBundleMemberImaFeSevErrSecs indicates the number of one second intervals in which the far-end contains IMA-RDI defects.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeUnavailSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12
tmnxBundleMemberImaNeUnavailSecs indicates the number of unavailable seconds at the near-end.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeUnavailSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13
tmnxBundleMemberImaFeUnavailSecs indicates the number of unavailable seconds at the near-end.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeTxUnuseSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14
tmnxBundleMemberImaNeTxUnuseSecs indicates the number of unavailable seconds at the near-end transmit link state machine.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeRxUnuseSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15
tmnxBundleMemberImaNeRxUnuseSecs indicates the number of unavailable seconds at the near-end receive link state machine.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeTxUnuseSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16
tmnxBundleMemberImaFeTxUnuseSecs indicates the number of unavailable seconds at the far-end transmit link state machine.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeRxUnuseSecs 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17
tmnxBundleMemberImaFeRxUnuseSecs indicates the number of unavailable seconds at the far-end receive link state machine.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeTxNumFails 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18
tmnxBundleMemberImaNeTxNumFails indicates the number of times that a near-end transmit alarm is set on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaNeRxNumFails 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19
tmnxBundleMemberImaNeRxNumFails indicates the number of times that a near-end receive alarm is set on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeTxNumFails 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20
tmnxBundleMemberImaFeTxNumFails indicates the number of times that a far-end transmit alarm is set on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaFeRxNumFails 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21
tmnxBundleMemberImaFeRxNumFails indicates the number of times that a far-end receive alarm is set on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaTxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22
tmnxBundleMemberImaTxIcpCells indicates the number of ICP cells that have been transmitted on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaRxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23
tmnxBundleMemberImaRxIcpCells indicates the number of ICP cells that have been received on the IMA link.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaErrorIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24
tmnxBundleMemberImaErrorIcpCells indicates the number of ICP cells with HEC or CRC-10 errors.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaLstRxIcpCells 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25
tmnxBundleMemberImaLstRxIcpCells indicates the number of lost ICP cells at the expected offset.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaOifAnomalies 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26
tmnxBundleMemberImaOifAnomalies indicates the number of OIF anomalies at the near-end.
OBJECT-TYPE    
  Counter32  

tmnxBundleMemberImaRxTestState 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27
tmnxBundleMemberImaRxTestState indicates the current state of the test pattern on this link.
OBJECT-TYPE    
  TmnxImaTestState  

tmnxBundleMemberImaRxTestPattern 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28
tmnxBundleMemberImaRxTestPattern indicates the received test pattern value on this link.
OBJECT-TYPE    
  INTEGER 0..255  

tmnxBundleMemberImaRelDelay 1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29
tmnxBundleMemberImaRelDelay indicates the latest measured delay on this member link relative to the member link with the least delay within the same IMA group
OBJECT-TYPE    
  Unsigned32  

tmnxDS1PortTable 1.3.6.1.4.1.6527.3.1.2.2.4.23
The tmnxDS1PortTable has an entry for a DS1 physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDS1PortEntry

tmnxDS1PortEntry 1.3.6.1.4.1.6527.3.1.2.2.4.23.1
Each row entry represents a physical DS1 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS1 MDA type The tmnxDS1PortEntry contains attributes that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS1PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
OBJECT-TYPE    
  TmnxDS1PortEntry  

tmnxDS1PortBuildout 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1
tmnxDS1PortBuildout configures the cable buildout length. A ds1 port has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable lengths of greater than 655 feet. This object applies to copper-cable-based DS1 ports only.
OBJECT-TYPE    
  INTEGER short(1), long(2)  

tmnxDS1PortLastChangeTime 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2
The tmnxDS1PortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port.
OBJECT-TYPE    
  TimeStamp  

tmnxDS1PortType 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3
tmnxDS1PortType configures the type of the physical port to 'ds1', 'e1' or 'j1'.
OBJECT-TYPE    
  INTEGER ds1(1), e1(2), j1(3)  

tmnxDS1PortLineLength 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4
tmnxDS1PortLineLength configuration only applies to a ds1 port configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the ds1 port buildout as 'long'. For 'long' buildout the following values are valid: lengthNotApplicable - Not applicable For 'short' buildout the following values are valid: length0To133 - For line length from 0 to 133 feet length134To266 - For line length from 134 to 266 feet length267To399 - For line length from 267 to 399 feet length400To533 - For line length from 400 to 533 feet length534To655 - For line length from 534 to 655 feet The default for 'long' buildout is 'lengthNotApplicable' while the default for 'short' buildout is 'length0To133'.
OBJECT-TYPE    
  INTEGER lengthNotApplicable(1), length0To133(2), length134To266(3), length267To399(4), length400To533(5), length534To655(6)  

tmnxDS1PortLbo 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5
tmnxDS1PortLbo configuration only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the following values are valid: lboNotApplicable - Not applicable For 'long' buildout the following values are valid: lbo0dB - For 0 dB lboNeg7p5dB - For -7.5 dB lboNeg15p0dB - For -15.0 dB lboNeg22p5dB - For -22.5 dB The default for 'short' build out is 'lboNotApplicable' while the default for 'long' buildout is 'lbo0dB'
OBJECT-TYPE    
  INTEGER lboNotApplicable(1), lbo0dB(2), lboNeg7p5dB(3), lboNeg15p0dB(4), lboNeg22p5dB(5)  

tmnxDS1PortDbGain 1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6
tmnxDS1PortDbGain only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss.
OBJECT-TYPE    
  Integer32  

tmnxPortSchedOverrideTable 1.3.6.1.4.1.6527.3.1.2.2.4.24
The tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortSchedOverrideEntry

tmnxPortSchedOverrideEntry 1.3.6.1.4.1.6527.3.1.2.2.4.24.1
Each row represents a particular port-scheduler override. Entries are created and deleted by the user.
OBJECT-TYPE    
  TmnxPortSchedOverrideEntry  

tmnxPortSchedOverrideRowStatus 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1
The value of tmnxPortSchedOverrideRowStatus is used for the creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty string, creation will fail.
OBJECT-TYPE    
  RowStatus  

tmnxPortSchedOverrideSchedName 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2
The value of tmnxPortSchedOverrideSchedName indicates the name of the port scheduler policy that this row entry overrides.
OBJECT-TYPE    
  DisplayString  

tmnxPortSchedOverrideLastChanged 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3
The value of tmnxPortSchedOverrideLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
OBJECT-TYPE    
  TimeStamp  

tmnxPortSchedOverrideMaxRate 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4
The value of tmnxPortSchedOverrideMaxRate specifies the explicit maximum frame based bandwidth limit. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl1PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5
The value of tmnxPortSchedOverrideLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl1CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6
The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir bandwidth limit for priority level 1. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl2PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7
The value of tmnxPortSchedOverrideLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl2CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8
The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir bandwidth limit for priority level 2. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl3PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9
The value of tmnxPortSchedOverrideLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl3CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10
The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir bandwidth limit for priority level 3. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl4PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11
The value of tmnxPortSchedOverrideLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl4CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12
The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir bandwidth limit for priority level 4. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl5PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13
The value of tmnxPortSchedOverrideLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl5CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14
The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir bandwidth limit for priority level 5. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl6PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15
The value of tmnxPortSchedOverrideLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl6CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16
The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir bandwidth limit for priority level 6. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl7PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17
The value of tmnxPortSchedOverrideLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl7CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18
The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir bandwidth limit for priority level 7. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideLvl8PIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19
The value of tmnxPortSchedOverrideLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.
OBJECT-TYPE    
  TPortSchedulerPIR  

tmnxPortSchedOverrideLvl8CIR 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20
The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir bandwidth limit for priority level 8. This object overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.
OBJECT-TYPE    
  TPortSchedulerCIR  

tmnxPortSchedOverrideFlags 1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21
The value of tmnxPortSchedOverrideFlags specifies the set of attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined in the port's port-scheduler policy.
OBJECT-TYPE    
  BITS maxRate(0), lvl1PIR(1), lvl1CIR(2), lvl2PIR(3), lvl2CIR(4), lvl3PIR(5), lvl3CIR(6), lvl4PIR(7), lvl4CIR(8), lvl5PIR(9), lvl5CIR(10), lvl6PIR(11), lvl6CIR(12), lvl7PIR(13), lvl7CIR(14), lvl8PIR(15), lvl8CIR(16)  

tmnxBPGrpAssocTable 1.3.6.1.4.1.6527.3.1.2.2.4.25
The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBPGrpAssocEntry

tmnxBPGrpAssocEntry 1.3.6.1.4.1.6527.3.1.2.2.4.25.1
Each row displays the relationship between a Bundle Protection group and its working and protection bundle.
OBJECT-TYPE    
  TmnxBPGrpAssocEntry  

tmnxBPGrpAssocWorkingBundleID 1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1
tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value of zero is given if no working bundle is associated with the given tmnxBundleBundleID.
OBJECT-TYPE    
  TmnxBundleID  

tmnxBPGrpAssocProtectBundleID 1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2
tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value of zero is given if no protection bundle is associated with the given tmnxBundleBundleID.
OBJECT-TYPE    
  TmnxBundleID  

tmnxBPGrpAssocActiveBundleID 1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3
tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active.
OBJECT-TYPE    
  TmnxBundleID  

tmnxBundleMlpppTable 1.3.6.1.4.1.6527.3.1.2.2.4.26
The tmnxBundleMlpppTable contains MLPPP specific data.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxBundleMlpppEntry

tmnxBundleMlpppEntry 1.3.6.1.4.1.6527.3.1.2.2.4.26.1
Each row entry contains data on an MLPPP Bundle.
OBJECT-TYPE    
  TmnxBundleMlpppEntry  

tmnxBundleMlpppEndpointID 1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1
tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value.
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

tmnxBundleMlpppEndpointIDClass 1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2
tmnxBundleMlpppEndpointIDClass specifies the Link Control Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. Bundle DEFVAL Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3) MLPPP Bundle Protection Group ipAddress (2)
OBJECT-TYPE    
  TmnxMlpppEndpointIdClass  

tmnxBundleMlpppClassCount 1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3
The value of tmnxBundleMlpppClassCount specifies whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP bundle. The value of 0 disables multiclass MLPPP including negotiation in the PPP protocol. All other values specify the number of classes to be supported on a given multiclass bundle and enable Multiclass MLPPP negotiation on that bundle. Non-zero values supported are platform/MDA specific. The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be changed when LFI is enabled on the bundle (see tmnxBundleLFI object in tmnxBundleTable). The value of tmnxBundleMlpppClassCount may be modified only when tmnxBundleNumLinks is zero. To set the value of tmnxBundleMlpppClassCount to a value greater than 4, the long sequence format must be enabled on the bundle (see tmnxBundleShortSequence object in tmnxBundleTable). Changing the value of tmnxBundleMlpppClassCount resets the values of tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their defaults
OBJECT-TYPE    
  INTEGER 0..16  

tmnxBundleMlpppIngQoSProfId 1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4
tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxBundleNumLinks is 0. The value of tmnxBundleMlpppIngQoSProfId of 0 indicates a default QoS profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
OBJECT-TYPE    
  TMlpppQoSProfileId  

tmnxBundleMlpppEgrQoSProfId 1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5
tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks is zero. The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates a default profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
OBJECT-TYPE    
  TMlpppQoSProfileId  

tmnxDigitalDiagMonitorTable 1.3.6.1.4.1.6527.3.1.2.2.4.31
The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDigitalDiagMonitorEntry

tmnxDigitalDiagMonitorEntry 1.3.6.1.4.1.6527.3.1.2.2.4.31.1
Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
OBJECT-TYPE    
  TmnxDigitalDiagMonitorEntry  

tmnxDDMTemperature 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1
The value of tmnxDDMTemperature indicates the current temperature of the SFP/XFP in degrees Celsius.
OBJECT-TYPE    
  Integer32  

tmnxDDMTempLowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2
The value of tmnxDDMTempLowWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMTempLowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3
The value of tmnxDDMTempLowAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTempHiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4
The value of tmnxDDMTempHiWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMTempHiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5
The value of tmnxDDMTempHiAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMSupplyVoltage 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6
The value of tmnxDDMSupplyVoltage indicates the current supply voltage of the SFP/XFP in micro-Volts (uV).
OBJECT-TYPE    
  Integer32  

tmnxDDMSupplyVoltageLowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7
The value of tmnxDDMSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMSupplyVoltageLowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8
The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMSupplyVoltageHiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9
The value of tmnxDDMSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMSupplyVoltageHiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10
The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxBiasCurrent 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11
The value of tmnxDDMTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in micro-Amperes (uA).
OBJECT-TYPE    
  Integer32  

tmnxDDMTxBiasCurrentLowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12
The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxBiasCurrentLowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13
The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxBiasCurrentHiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14
The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxBiasCurrentHiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15
The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxOutputPower 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16
The value of tmnxDDMTxOutputPower indicates the current Output Power of the SFP/XFP in micro-Watts (uW).
OBJECT-TYPE    
  Integer32  

tmnxDDMTxOutputPowerLowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17
The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxOutputPowerLowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18
The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxOutputPowerHiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19
The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMTxOutputPowerHiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20
The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPower 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21
The value of tmnxDDMRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in micro-Watts (uW).
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPowerLowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22
The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPowerLowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23
The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPowerHiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24
The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning.
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPowerHiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25
The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
OBJECT-TYPE    
  Integer32  

tmnxDDMRxOpticalPowerType 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26
The value of tmnxDDMRxOpticalPowerType indicates whether the tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA).
OBJECT-TYPE    
  INTEGER oma(0), average(1)  

tmnxDDMAux1 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27
The value of tmnxDDMAux1 indicates the Manufacturer specific Auxiliary 1 information of the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux1LowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28
The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific Auxiliary 1 low-warning threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux1LowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29
The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific Auxiliary 1 low-alarm threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux1HiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30
The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific Auxiliary 1 hi-warning threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux1HiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31
The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific Auxiliary 1 hi-alarm threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux1Type 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32
The value of tmnxDDMAux1Type indicates the measurement type of the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
OBJECT-TYPE    
  INTEGER none(0), adp-bias-voltage(1), reserved-2(2), tec-current(3), laser-temp(4), laser-wavelength(5), voltage-50(6), voltage-33(7), voltage-18(8), voltage-52(9), current-50(10), reserved-11(11), reserved-12(12), current-33(13), current-18(14), current-52(15)  

tmnxDDMAux2 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33
The value of tmnxDDMAux2 indicates the Manufacturer specific Auxiliary 2 information of the SFP/XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux2LowWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34
The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific Auxiliary 2 low-warning threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux2LowAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35
The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific Auxiliary 2 low-alarm threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux2HiWarning 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36
The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific Auxiliary 2 hi-warning threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux2HiAlarm 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37
The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific Auxiliary 2 hi-alarm threshold for the XFP.
OBJECT-TYPE    
  Integer32  

tmnxDDMAux2Type 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38
The value of tmnxDDMAux2Type indicates the measurement type of the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
OBJECT-TYPE    
  INTEGER none(0), adp-bias-voltage(1), reserved-2(2), tec-current(3), laser-temp(4), laser-wavelength(5), voltage-50(6), voltage-33(7), voltage-18(8), voltage-52(9), current-50(10), reserved-11(11), reserved-12(12), current-33(13), current-18(14), current-52(15)  

tmnxDDMFailedThresholds 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39
The value of tmnxDDMFailedThresholds indicates which objects of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded.
OBJECT-TYPE    
  BITS unknown(0), temperature-low-warning(1), temperature-low-alarm(2), temperature-high-warning(3), temperature-high-alarm(4), supplyVoltage-low-warning(5), supplyVoltage-low-alarm(6), supplyVoltage-high-warning(7), supplyVoltage-high-alarm(8), txBiasCurrent-low-warning(9), txBiasCurrent-low-alarm(10), txBiasCurrent-high-warning(11), txBiasCurrent-high-alarm(12), txOutputPower-low-warning(13), txOutputPower-low-alarm(14), txOutputPower-high-warning(15), txOutputPower-high-alarm(16), rxOpticalPower-low-warning(17), rxOpticalPower-low-alarm(18), rxOpticalPower-high-warning(19), rxOpticalPower-high-alarm(20), aux1-low-warning(21), aux1-low-alarm(22), aux1-high-warning(23), aux1-high-alarm(24), aux2-low-warning(25), aux2-low-alarm(26), aux2-high-warning(27), aux2-high-alarm(28)  

tmnxDDMExternallyCalibrated 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40
The value of tmnxDDMExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false).
OBJECT-TYPE    
  TruthValue  

tmnxDDMExtCalRxPower4 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41
The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32  

tmnxDDMExtCalRxPower3 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42
The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2.
OBJECT-TYPE    
  Unsigned32  

tmnxDDMExtCalRxPower2 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43
The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32  

tmnxDDMExtCalRxPower1 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44
The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32  

tmnxDDMExtCalRxPower0 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45
The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32  

tmnxDDMExtCalTxLaserBiasSlope 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46
The value of tmnxDDMExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32 0..65535  

tmnxDDMExtCalTxLaserBiasOffset 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47
The value of tmnxDDMExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Integer32 -32767..32768  

tmnxDDMExtCalTxPowerSlope 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48
The value of tmnxDDMExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32 0..65535  

tmnxDDMExtCalTxPowerOffset 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49
The value of tmnxDDMExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Integer32 -32767..32768  

tmnxDDMExtCalTemperatureSlope 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50
The value of tmnxDDMExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32 0..65535  

tmnxDDMExtCalTemperatureOffset 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51
The value of tmnxDDMExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Integer32 -32767..32768  

tmnxDDMExtCalVoltageSlope 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52
The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Unsigned32 0..65535  

tmnxDDMExtCalVoltageOffset 1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53
The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
OBJECT-TYPE    
  Integer32 -32767..32768  

tmnxPortNotificationObjects 1.3.6.1.4.1.6527.3.1.2.2.7
OBJECT IDENTIFIER    

tmnxPortNotifyPortId 1.3.6.1.4.1.6527.3.1.2.2.7.1
Used by tmnx port Notifications, the OID indicates the port or sonet path associated with the alarm.
OBJECT-TYPE    
  TmnxPortID  

tmnxPortNotifySonetAlarmReason 1.3.6.1.4.1.6527.3.1.2.2.7.2
Used by tmnx sonet Port Notifications, the value of tmnxPortNotifySonetAlarmReason indicates the reason a sonet port alarm has been raised.
OBJECT-TYPE    
  INTEGER notUsed(0), loc(1), lais(2), lrdi(3), ss1f(4), sb1err(5), lb2erSd(6), lb2erSf(7), slof(8), slos(9), stxptr(10), srxptr(11), lrei(12)  

tmnxPortNotifySonetPathAlarmReason 1.3.6.1.4.1.6527.3.1.2.2.7.3
Used by tmnx sonet path Notifications, the value of tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path alarm has been raised.
OBJECT-TYPE    
  INTEGER notUsed(0), pais(1), plop(2), prdi(3), pb3err(4), pplm(5), prei(6), puneq(7), plcd(8)  

tmnxPortNotifyError 1.3.6.1.4.1.6527.3.1.2.2.7.4
Used by tmnxEqPortError notification, the value of tmnxPortNotifyError indicates the reason a port has an error.
OBJECT-TYPE    
  INTEGER txClockError(1), rxClockError(2), txFifoError(3), laserError(4), miscError(5)  

tmnxPortNotifyDS3AlarmReason 1.3.6.1.4.1.6527.3.1.2.2.7.5
Used by tmnx DS3 Port Notifications, the value of tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface alarm has been raised.
OBJECT-TYPE    
  INTEGER notUsed(0), ais(1), los(2), oof(3), rai(4), looped(5)  

tmnxPortNotifyDS1AlarmReason 1.3.6.1.4.1.6527.3.1.2.2.7.6
Used by tmnx DS1 Port Notifications, the value of tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface alarm has been raised.
OBJECT-TYPE    
  INTEGER notUsed(0), ais(1), los(2), oof(3), rai(4), looped(5), berSd(6), berSf(7)  

tmnxPortNotifyBundleId 1.3.6.1.4.1.6527.3.1.2.2.7.7
Used by tmnx bundle Notifications, the value indicates the bundle associated with the alarm.
OBJECT-TYPE    
  TmnxBundleID  

tmnxPortNotifyEtherAlarmReason 1.3.6.1.4.1.6527.3.1.2.2.7.8
Used by tmnx ethernet Port Notifications, the value of tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port alarm has been raised.
OBJECT-TYPE    
  TmnxPortEtherReportValue  

tmnxDDMFailedObject 1.3.6.1.4.1.6527.3.1.2.2.7.9
Used by Digital Diagnostic Monitoring (DDM) Notifications, the value of tmnxDDMFailedObject indicates which object of the monitored SFP/XFP is in a failed or cleared threshold state.
OBJECT-TYPE    
  INTEGER unknown(0), temperature-low-warning(1), temperature-low-alarm(2), temperature-high-warning(3), temperature-high-alarm(4), supplyVoltage-low-warning(5), supplyVoltage-low-alarm(6), supplyVoltage-high-warning(7), supplyVoltage-high-alarm(8), txBiasCurrent-low-warning(9), txBiasCurrent-low-alarm(10), txBiasCurrent-high-warning(11), txBiasCurrent-high-alarm(12), txOutputPower-low-warning(13), txOutputPower-low-alarm(14), txOutputPower-high-warning(15), txOutputPower-high-alarm(16), rxOpticalPower-low-warning(17), rxOpticalPower-low-alarm(18), rxOpticalPower-high-warning(19), rxOpticalPower-high-alarm(20), aux1-low-warning(21), aux1-low-alarm(22), aux1-high-warning(23), aux1-high-alarm(24), aux2-low-warning(25), aux2-low-alarm(26), aux2-high-warning(27), aux2-high-alarm(28)  

tmnxFRObjs 1.3.6.1.4.1.6527.3.1.2.2.9
OBJECT IDENTIFIER    

tmnxFRDlcmiTable 1.3.6.1.4.1.6527.3.1.2.2.9.1
The tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxFRDlcmiEntry

tmnxFRDlcmiEntry 1.3.6.1.4.1.6527.3.1.2.2.9.1.1
The Parameters for a particular Data Link Connection Management Interface. Entries cannot be created and deleted via SNMP SET operations.
OBJECT-TYPE    
  TmnxFRDlcmiEntry  

tmnxFRDlcmiMode 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1
tmnxFRDlcmiMode is used to set the mode of the interface. It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equipment (bidir).
OBJECT-TYPE    
  INTEGER dte(1), dce(2), bidir(3)  

tmnxFRDlcmiN392Dce 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2
tmnxFRDlcmiN392Dce is used to configure the LMI error threshold for DCE interface.
OBJECT-TYPE    
  INTEGER 1..10  

tmnxFRDlcmiN393Dce 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3
tmnxFRDlcmiN393Dce is used to configure the LMI monitored event count for DCE interface.
OBJECT-TYPE    
  INTEGER 1..10  

tmnxFRDlcmiT392Dce 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4
tmnxFRDlcmiT392Dce is used to configure the polling verification timer for the Frame Relay DCE interface.
OBJECT-TYPE    
  INTEGER 5..30  

tmnxFRDlcmiTxStatusEnqMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5
tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status Enquiry messages transmitted on this Frame Relay interface.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiRxStatusEnqMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6
tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status Enquiry messages received on this Frame Relay interface.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiStatusEnqMsgTimeouts 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7
tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times the LMI agent did not receive a Status Enquiry message within the allotted time.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiTxStatusMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8
tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status messages transmitted on this Frame Relay interface.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiRxStatusMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9
tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status messages received on this Frame Relay interface.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiStatusMsgTimeouts 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10
tmnxFRDlcmiStatusMsgTimeouts indicates the number of times the LMI agent did not receive a Status message within the allotted time.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiDiscardedMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11
tmnxFRDlcmiDiscardedMsgs indicates the number of times the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid.
OBJECT-TYPE    
  Counter32  

tmnxFRDlcmiInvRxSeqNumMsgs 1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12
tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the agent.
OBJECT-TYPE    
  Counter32  

tmnxQosAppObjs 1.3.6.1.4.1.6527.3.1.2.2.10
OBJECT IDENTIFIER    

tmnxQosPoolAppTable 1.3.6.1.4.1.6527.3.1.2.2.10.2
This table maintains associations of the buffer pools with the individual objects.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxQosPoolAppEntry

tmnxQosPoolAppEntry 1.3.6.1.4.1.6527.3.1.2.2.10.2.1
This entry maintains the specifics about the association of a buffer pool and an object.
OBJECT-TYPE    
  TmnxQosPoolAppEntry  

tmnxObjectType 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1
The object tmnxObjectType defines the type of object to which the pool is being setup for.
OBJECT-TYPE    
  INTEGER mda(1), port(2), channel(3), bundle(4)  

tmnxObjectId 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2
tmnxObjectId is used to identify the specific object. If tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID.
OBJECT-TYPE    
  TmnxPortID  

tmnxObjectAppType 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3
The object tmnxObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress.
OBJECT-TYPE    
  INTEGER accessIngress(1), accessEgress(2), networkIngress(3), networkEgress(4)  

tmnxObjectAppPool 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4
tmnxObjectAppPool specifies the name of the pool to be used/created.
OBJECT-TYPE    
  TNamedItem  

tmnxObjectAppPoolRowStatus 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5
The object tmnxObjectAppPoolRowStatus is used to create or remove a pool application to the object.
OBJECT-TYPE    
  RowStatus  

tmnxObjectAppResvCbs 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6
The percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.
OBJECT-TYPE    
  Integer32 -1 | 0..100  

tmnxObjectAppSlopePolicy 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7
tmnxObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.
OBJECT-TYPE    
  TNamedItem  

tmnxObjectAppPoolSize 1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8
Size in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.
OBJECT-TYPE    
  Integer32 -1 | 0..100  

tmnxATMObjs 1.3.6.1.4.1.6527.3.1.2.2.11
OBJECT IDENTIFIER    

tmnxATMIntfTable 1.3.6.1.4.1.6527.3.1.2.2.11.1
The tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxATMIntfEntry

tmnxATMIntfEntry 1.3.6.1.4.1.6527.3.1.2.2.11.1.1
The Parameters for a particular ATM Cell Management Interface. Entries cannot be created or deleted via SNMP SET operations. Entries will exist in this table when ATM encapsulation is configured on the port/channel.
OBJECT-TYPE    
  TmnxATMIntfEntry  

tmnxATMIntfCellFormat 1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1
tmnxATMIntfCellFormat is used to set the cell format (UNI or NNI) that is to be used on the ATM interface.
OBJECT-TYPE    
  INTEGER uni(1), nni(2)  

tmnxATMIntfMinVpValue 1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2
tmnxATMIntfMinVpValue is used to set the minimum allowable VPI value that can be used on the ATM interface for a VPC.
OBJECT-TYPE    
  Integer32 0..4095  

tmnxATMIntfMapping 1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3
The value of tmnxATMIntfMapping specifies the cell mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET requests. When tmnxPortChanType has a value of 'pdhDs3 (14)', tmnxATMIntfMapping can be set to 'plcp (2)'.
OBJECT-TYPE    
  INTEGER direct(1), plcp(2)  

tmnxPortStatsObjs 1.3.6.1.4.1.6527.3.1.2.2.12
OBJECT IDENTIFIER    

tmnxPortNetIngressStatsTable 1.3.6.1.4.1.6527.3.1.2.2.12.1
Defines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortNetIngressStatsEntry

tmnxPortNetIngressStatsEntry 1.3.6.1.4.1.6527.3.1.2.2.12.1.1
Defines an entry in tmnxPortNetIngressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
OBJECT-TYPE    
  TmnxPortNetIngressStatsEntry  

tmnxPortNetIngressQueueIndex 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1
tmnxPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system.
OBJECT-TYPE    
  TQueueId 1..16  

tmnxPortNetIngressFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2
tmnxPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3
tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4
tmnxPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5
tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressDroInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6
tmnxPortNetIngressDroInProfPkts indicates the number of conforming network ingress packets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressDroOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7
tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding network ingress packets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressDroInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8
tmnxPortNetIngressDroInProfOcts indicates the number of conforming network ingress octets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetIngressDroOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9
tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding network ingress octets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressStatsTable 1.3.6.1.4.1.6527.3.1.2.2.12.2
Defines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortNetEgressStatsEntry

tmnxPortNetEgressStatsEntry 1.3.6.1.4.1.6527.3.1.2.2.12.2.1
Defines an entry in tmnxPortNetEgressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
OBJECT-TYPE    
  TmnxPortNetEgressStatsEntry  

tmnxPortNetEgressQueueIndex 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1
tmnxPortNetEgressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
OBJECT-TYPE    
  TQueueId 1..8  

tmnxPortNetEgressFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2
tmnxPortNetEgressFwdInProfPkts indicates the number of conforming network egress packets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3
tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding network egress packets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4
tmnxPortNetEgressFwdInProfOcts indicates the number of conforming network egress octets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5
tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding network egress octets forwarded on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressDroInProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6
tmnxPortNetEgressDroInProfPkts indicates the number of conforming network egress packets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressDroOutProfPkts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7
tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding network egress packets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressDroInProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8
tmnxPortNetEgressDroInProfOcts indicates the number of conforming network egress octets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressDroOutProfOcts 1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9
tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding network egress octets dropped on this port using this queue.
OBJECT-TYPE    
  Counter64  

tmnxCiscoHDLCStatsTable 1.3.6.1.4.1.6527.3.1.2.2.12.3
The tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxCiscoHDLCStatsEntry

tmnxCiscoHDLCStatsEntry 1.3.6.1.4.1.6527.3.1.2.2.12.3.1
An entry in the tmnxCiscoHDLCStatsTable.
OBJECT-TYPE    
  TmnxCiscoHDLCStatsEntry  

tmnxCiscoHDLCDiscardStatInPkts 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1
tmnxCiscoHDLCDiscardStatInPkts indicates the number of inbound Cisco HDLC packets discarded.
OBJECT-TYPE    
  Unsigned32  

tmnxCiscoHDLCDiscardStatOutPkts 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2
tmnxCiscoHDLCDiscardStatOutPkts indicates the number of outbound Cisco HDLC packets discarded.
OBJECT-TYPE    
  Unsigned32  

tmnxCiscoHDLCStatInPkts 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3
tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco HDLC packets.
OBJECT-TYPE    
  Unsigned32  

tmnxCiscoHDLCStatOutPkts 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4
tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco HDLC packets.
OBJECT-TYPE    
  Unsigned32  

tmnxCiscoHDLCStatInOctets 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5
tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco HDLC octets.
OBJECT-TYPE    
  Unsigned32  

tmnxCiscoHDLCStatOutOctets 1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6
tmnxCiscoHDLCStatOutOctets indicates the number of outbound Cisco HDLC octets.
OBJECT-TYPE    
  Unsigned32  

tmnxMcMlpppStatsTable 1.3.6.1.4.1.6527.3.1.2.2.12.4
Defines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMcMlpppStatsEntry

tmnxMcMlpppStatsEntry 1.3.6.1.4.1.6527.3.1.2.2.12.4.1
Defines an entry in tmnxMcMlpppStatsTable. Entries are created and deleted by the system depending on the number of classes being used by a given MLPPP bundle.
OBJECT-TYPE    
  TmnxMcMlpppStatsEntry  

tmnxMcMlpppClassIndex 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1
tmnxMcMlpppClassIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system.
OBJECT-TYPE    
  TmnxMcMlpppClassIndex  

tmnxMcMlpppStatsIngressOct 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2
The value of tmnxMcMlpppStatsIngressOct indicates the total number of octets in all packets received on the bundle for the given class on ingress before reassembly.
OBJECT-TYPE    
  Counter32  

tmnxMcMlpppStatsIngressPkt 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3
The value of tmnxMcMlpppStatsIngressPkt indicates the total number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols.
OBJECT-TYPE    
  Counter32  

tmnxMcMlpppStatsIngressErrPkt 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4
The value of tmnxMcMlpppStatsIngressErrPkt indicates the total number of packets discarded due to reassembly errors on the bundle for the given class on ingress.
OBJECT-TYPE    
  Counter32  

tmnxMcMlpppStatsEgressOct 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5
The value of tmnxMcMlpppStatsEgressOct indicates the total number of octets in all packets received on the bundle for the given class on egress before segmentation.
OBJECT-TYPE    
  Counter32  

tmnxMcMlpppStatsEgressPkt 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6
The value of tmnxMcMlpppStatsEgressPkt indicates the total number of packets forwarded on the bundle for the given class on egress towards the line.
OBJECT-TYPE    
  Counter32  

tmnxMcMlpppStatsEgressErrPkt 1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7
The value of tmnxMcMlpppStatsEgressErrPkt indicates the total number of packets discarded due to segmentation errors on the bundle for the given class on egress.
OBJECT-TYPE    
  Counter32  

tmnxPortNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.2.2
OBJECT IDENTIFIER    

tmnxPortNotification 1.3.6.1.4.1.6527.3.1.3.2.2.0
OBJECT IDENTIFIER    

tmnxEqOobPortFailure 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
Generated when the out-of-band Ethernet port has failed. On the Alcatel 7x50 SR system, the out-of-band port is the CPM management interface. This notification was made obsolete in the 2.1 release. The Out-of-band, OOB, port is what id refered to as the management port or cpm port. It has an entry in ifTable and linkup, linkDown and tmnxEqPortError notifications are sent for the management port just as for any other port in the system.
NOTIFICATION-TYPE    
  tmnxChassisNotifyChassisId  
  tmnxPortNotifyPortId  

tmnxEqPortFailure 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
Generated when a port has failed. This notification was made obsolete in the 2.1 release. tmnxEqPortError is used instead of tmnxEqPortFailure. Standard IETF linkDown notification is sent when a physical port failure is detected. tmnxEqPortError is sent with a ASCII reason message when port errors are detected. It was originally intended that tmnxEqPortError be used to report errors that do not cause port state change to 'down'. tmnxEqPortFailure was intended to report errors that do cause the port state change to 'down'. However, in the implementation tmnxEqPortError is used for both fatal and non-fatal errors.
NOTIFICATION-TYPE    
  tmnxChassisNotifyChassisId  
  tmnxPortNotifyPortId  

tmnxQosServiceDegraded 1.3.6.1.4.1.6527.3.1.3.2.2.0.3
Generated when the port is unable to provided the specified quality of service level.
NOTIFICATION-TYPE    
  tmnxChassisNotifyChassisId  
  tmnxPortNotifyPortId  

tmnxEqPortSonetAlarm 1.3.6.1.4.1.6527.3.1.3.2.2.0.4
Generated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifySonetAlarmReason  

tmnxEqPortSonetAlarmClear 1.3.6.1.4.1.6527.3.1.3.2.2.0.5
Generated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifySonetAlarmReason  

tmnxEqPortSonetPathAlarm 1.3.6.1.4.1.6527.3.1.3.2.2.0.6
Generated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifySonetPathAlarmReason  

tmnxEqPortSonetPathAlarmClear 1.3.6.1.4.1.6527.3.1.3.2.2.0.7
Generated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifySonetPathAlarmReason  

tmnxEqPortSFPInserted 1.3.6.1.4.1.6527.3.1.3.2.2.0.8
Generated when a SFP is inserted in the port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqPortSFPRemoved 1.3.6.1.4.1.6527.3.1.3.2.2.0.9
Generated when a SFP is removed from the port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqPortWrongSFP 1.3.6.1.4.1.6527.3.1.3.2.2.0.10
Generated when a wrong type of SFP optics module is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA. Because of the large variety of SFPs now supported and their different encoding schemes for compliance bits, the check for wrong SFP has been removed. As a result, tmnxEqPortWrongSFP notification is no longer generated. However, wrong SFP can be inferred from port statistics.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqPortSFPCorrupted 1.3.6.1.4.1.6527.3.1.3.2.2.0.11
Generated when SFP information stored in the EPROM on the SFP is corrupt. This notification was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems; it was replaced by tmnxEqPortSFPStatusFailure.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxPortNotifyBerSdTca 1.3.6.1.4.1.6527.3.1.3.2.2.0.12
Generated when a SONET/SDH port's signal degradation bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxSonetBerSdThreshold  

tmnxPortNotifyBerSfTca 1.3.6.1.4.1.6527.3.1.3.2.2.0.13
Generated when a SONET/SDH port's signal failure bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxSonetBerSfThreshold  

tmnxEqPortError 1.3.6.1.4.1.6527.3.1.3.2.2.0.14
Generated when an error listed in tmnxPortNotifyError is detected on the port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyError  

tmnxEqPortDS3Alarm 1.3.6.1.4.1.6527.3.1.3.2.2.0.15
Generated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyDS3AlarmReason  

tmnxEqPortDS3AlarmClear 1.3.6.1.4.1.6527.3.1.3.2.2.0.16
Generated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyDS3AlarmReason  

tmnxEqPortDS1Alarm 1.3.6.1.4.1.6527.3.1.3.2.2.0.17
Generated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyDS1AlarmReason  

tmnxEqPortDS1AlarmClear 1.3.6.1.4.1.6527.3.1.3.2.2.0.18
Generated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyDS1AlarmReason  

tmnxEqPortBndlYellowDiffExceeded 1.3.6.1.4.1.6527.3.1.3.2.2.0.19
Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleYellowDiffDelay.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxBundleYellowDiffDelay  

tmnxEqPortBndlRedDiffExceeded 1.3.6.1.4.1.6527.3.1.3.2.2.0.20
Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleRedDiffDelay.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxBundleRedDiffDelay  

tmnxEqPortBndlBadEndPtDiscr 1.3.6.1.4.1.6527.3.1.3.2.2.0.21
Generated when the port detected mismatched peer endpoint discriminator for the bundle.
NOTIFICATION-TYPE    
  tmnxBundleMemberDownReason  

tmnxEqPortEtherAlarm 1.3.6.1.4.1.6527.3.1.3.2.2.0.22
tmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyEtherAlarmReason  

tmnxEqPortEtherAlarmClear 1.3.6.1.4.1.6527.3.1.3.2.2.0.23
tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortNotifyEtherAlarmReason  

tmnxDS1E1LoopbackStarted 1.3.6.1.4.1.6527.3.1.3.2.2.0.24
The tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxDS1Loopback  

tmnxDS1E1LoopbackStopped 1.3.6.1.4.1.6527.3.1.3.2.2.0.25
The tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxDS1Loopback  

tmnxDS3E3LoopbackStarted 1.3.6.1.4.1.6527.3.1.3.2.2.0.26
The tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxDS3ChannelLoopback  

tmnxDS3E3LoopbackStopped 1.3.6.1.4.1.6527.3.1.3.2.2.0.27
The tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxDS3ChannelLoopback  

tmnxSonetSDHLoopbackStarted 1.3.6.1.4.1.6527.3.1.3.2.2.0.28
The tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxSonetLoopback  

tmnxSonetSDHLoopbackStopped 1.3.6.1.4.1.6527.3.1.3.2.2.0.29
The tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxSonetLoopback  

tmnxEqPortEtherLoopDetected 1.3.6.1.4.1.6527.3.1.3.2.2.0.30
The tmnxEqPortEtherLoopDetected notification is genereated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqPortEtherLoopCleared 1.3.6.1.4.1.6527.3.1.3.2.2.0.31
The tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqPortSpeedCfgNotCompatible 1.3.6.1.4.1.6527.3.1.3.2.2.0.32
Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortEtherSpeed  

tmnxEqPortDuplexCfgNotCompatible 1.3.6.1.4.1.6527.3.1.3.2.2.0.33
Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortEtherDuplex  

tmnxEqPortIngressRateCfgNotCompatible 1.3.6.1.4.1.6527.3.1.3.2.2.0.34
Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  

tmnxEqDigitalDiagMonitorFailure 1.3.6.1.4.1.6527.3.1.3.2.2.0.35
Generated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) enters a failed state.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxDDMFailedObject  

tmnxEqPortSFPStatusFailure 1.3.6.1.4.1.6527.3.1.3.2.2.0.36
Generated when the tmnxPortSFPStatus of an SFP/XFP results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Alcatel 7x50 SR series systems.
NOTIFICATION-TYPE    
  tmnxPortNotifyPortId  
  tmnxPortSFPStatus  

Defined Objects

TmnxPortOperStatus  
The current operational status of this port.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), inService(2), outOfService(3), diagnosing(4), failed(5)  

TmnxPortEtherReportValue  
The TmnxPortEtherReportValue is an enumerated integer that describes the values used to identify the reason an alarm has been raised on an Ethernet Port.
TEXTUAL-CONVENTION    
  INTEGER notUsed(0), signalFailure(1), remoteFault(2), localFault(3), noFrameLock(4), highBer(5)  

TmnxPortEtherReportStatus  
The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port.
TEXTUAL-CONVENTION    
  BITS notUsed(0), signalFailure(1), remoteFault(2), localFault(3), noFrameLock(4), highBer(5)  

TmnxPortClass  
The TmnxPortClass data type is an enumerated integer that describes the values used to identify the class of interface provided by this port.
TEXTUAL-CONVENTION    
  INTEGER none(1), faste(2), gige(3), xgige(4), sonet(5), vport(6), unused(7), xcme(8), tdm(9)  

TmnxPortConnectorType  
The TmnxPortConnectorType data type is an enumerated integer that describes the values used to identify the connector type used on a port. A TmnxPortConnectorType value specifies the index value for the entry in the tmnxPortConnectTypeTable used to identify a specific type of port connector. Some example port connector types are: 'unknown', 'rj45', 'bncCoax', 'mtrj', 'scDuplex', 'sffp', 'lcDuplex'.
TEXTUAL-CONVENTION    
  Unsigned32  

TmnxPortState  
The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic that can be passed on this 'up' link. The 'diagnose' state represents the port undergoing diagnostic test.
TEXTUAL-CONVENTION    
  INTEGER none(1), ghost(2), linkDown(3), linkUp(4), up(5), diagnose(6)  

TmnxPortType  
The TmnxPortType data type is an enumerated integer that describes the values used to identify the specific type of hardware port. A TmnxPortType value specifies the index value for the entry in the tmnxPortTypeTable used to identify a specific type of port. Some example port types are: -- unknown - no port installed or unidentified -- portType100Tx - 10/100 base copper -- portType100F - 10/100 base fiber -- portType1000Tx - 1000 base copper -- portType1000F - 1000 base fiber -- portType1000dF - 1000 base dual fiber -- portTypeOC3sonet - OC-3 -- portTypeOC12sonet - OC-12 -- portTypeOC48sonet - OC-48 -- portTypeOC192sonet - OC-192 -- portType10000F - 10 Gig Ethernet LAN -- portTypeXgigWan - 10 Gig Ethernet WAN -- portTypeVport - Virtual port -- portTypeDS3E3 - DS3/E3 port -- portTypeDS1E1 - DS1/E1 port
TEXTUAL-CONVENTION    
  Unsigned32  

TmnxDs0ChannelList  
A list of ds0 timeslots on a DS1 line. The list is specified as an OCTET STRING in which each ds0 timeslot is represented by a single bit, where timeslots 1 through 8 are represented by the bits in the first octet, timeslots 9 through 16 by the bits in the second octet, etc. In each octet, the lowest numbered timeslot is represented by the most significant bit, and the highest numbered timeslot by the least significant bit. A timeslot is present in the list when its bit is 1, and absent when its bit is 0. If the OCTET STRING value has more bits than required to represent the timeslots on a DS1, then the extra bits are ignored.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..4)  

TmnxBundleID  
A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl type | bndlid| +-----+-------+-------+-------+-----------+-------+ The bundle id is unique for a MDA. The bndlid must fall in one of the following ranges depending on MDA type: mda-type range m4-choc3-as-sfp 1-256 m1-choc12-as-sfp 1-256 m12-chds3-as 1-256 m4-chds3-as 1-112 m4-chds3 1-56 m12-chds3 1-56 m1-choc12-sfp 1-56 m4-choc3-sfp 1-56 c8-chds1 1-56 c8-atmds1 1-8 A slot value of 15 (Invalid slot) and mda value of 0 (invalid mda) represents a bundle protection group. Otherwise, the bundle is considered associated with a valid slot and mda. The following bundle types are supported: bndl type value MLPPP 000 IMA 001
TEXTUAL-CONVENTION    
  Unsigned32  

TmnxDSXBertPattern  
The TmnxDSXBertPattern data type is an enumerated integer that indicates the pattern used for the Bit Error Rate Test (BERT).
TEXTUAL-CONVENTION    
  INTEGER none(0), ones(1), zeros(2), alternating(3), twoexp3(4), twoexp9(5), twoexp15(6), twoexp20(7), twoexp11(8), twoexp20q(9), twoexp23(10)  

TmnxDSXBertOperStatus  
The TmnxDSXBertOperStatus data type is an enumerated integer that indicates the status of Bit Error Rate Test (BERT). When BERT is activated, the status will be 'active'. Otherwise the status will be 'idle' or 'noMdaResources' if the last BERT test could not be executed because of an MDA concurrent BERT test limit.
TEXTUAL-CONVENTION    
  INTEGER none(0), active(1), idle(2), noMdaResources(3)  

TmnxDSXIdleCycleFlags  
The TmnxDSXIdleCycleFlags data type is an enumerated integer that indicates the value that the DS3/DS1 port/channel or a DS0 channel group transmits during idle cycle. The value of 'none' is applicable to ATM and CEM ports/channels only, which transmits idle cells and not octets defined by the below values. If the value is set to 'flags', a value of 0x7E is used. If the value is set to 'ones', a value of 0xFF is used.
TEXTUAL-CONVENTION    
  INTEGER none(0), flags(1), ones(2)  

TmnxDSXIdleFillType  
The TmnxDSXIdleFillType data type is an enumerated integer that indicates the type of data fill that a CEM DS3/DS1 channel or a DS0 channel group plays out when the channel experiences underun. - The value of 'notApplicable' indicates that this object is not applicable to the channel. - The value of 'allOnes' indicates that all 1's will be played out. - The value of 'userDefinedPattern' indicates that a user defined pattern will be played out.
TEXTUAL-CONVENTION    
  INTEGER notApplicable(0), allOnes(1), userDefinedPattern(2)  

TmnxDSXLoopback  
The TmnxDSXLoopback data type is an enumerated integer that indicates the type of loopback the DS3/DS1 port/channel currently is in.
TEXTUAL-CONVENTION    
  INTEGER none(0), line(1), internal(2), remote(3)  

TmnxDSXReportAlarm  
The TmnxDSXReportAlarm data type indicates the type of TDM alarm: ais - alarm indication signal errors. los - loss of signal errors. oof - out-of-frame errors. rai - resource availability indicator events. looped - far end wants the read end to loopback berSd - DSX bit error signal degradation berSf - DSX bit error signal failure
TEXTUAL-CONVENTION    
  BITS notUsed(0), ais(1), los(2), oof(3), rai(4), looped(5), berSd(6), berSf(7)  

TmnxDSXClockSource  
The TmnxDSXClockSource data type is an enumerated type that indicates the clock for transmitted data on a DS3 or DS1 channel. loopTimed(1) - The clock is recovered from the line's receive data stream nodeTimed(2) - The clock is internal adaptive(3) - The clock is adaptively recovered from the rate at which data is received and not from the physical layer. differential(4) - The clock is recovered from differential RTP timestamp header.
TEXTUAL-CONVENTION    
  INTEGER loopTimed(1), nodeTimed(2), adaptive(3), differential(4)  

TmnxDSXClockSyncState  
The TmnxDSXClockSyncState data type is an enumeration type that indicates the clock synchronization state on a DS3 or DS1 channel. unknown(0) - Unsupported or unknown state normal(1) - Normal (locked) state holdOver(2) - Synchronization with reference has been lost freeRun(3) - Synchronized with internal reference
TEXTUAL-CONVENTION    
  INTEGER unknown(0), normal(1), holdOver(2), freeRun(3)  

TmnxDS1Loopback  
The TmnxDS1Loopback data type is an enumerated integer that indicates the type of loopback the DS1 port/channel currently is in. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests a line loopback of type FDL ANSI T1.403. A 'fdlBellcore' requests a line loopback of type FDL Bellcore TR-TSY-000312. A 'payloadAnsi' requests a payload loopback of type FDL ANSI T1.403. A 'inbandAnsi' requests a line loopback of type inband ANSI T1.403. A 'inbandBellcore' requests a line loopback of type inband Bellcore TR-TSY-000312.
TEXTUAL-CONVENTION    
  INTEGER none(0), line(1), internal(2), fdlAnsi(3), fdlBellcore(4), payloadAnsi(5), inbandAnsi(6), inbandBellcore(7)  

TmnxDS3Loopback  
The TmnxDS3Loopback data type is an enumerated integer that indicates the type of loopback the DS3 port/channel currently is in. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.
TEXTUAL-CONVENTION    
  INTEGER none(0), line(1), internal(2), remote(3)  

TmnxImaGrpState  
The TmnxImaGrpState indicates the current state of the IMA Group State Machine.
TEXTUAL-CONVENTION    
  INTEGER invalid(0), notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupportedM(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10)  

TmnxImaGrpFailState  
The TmnxImaGrpFailState indcates the failure reason of an IMA group.
TEXTUAL-CONVENTION    
  INTEGER noFailure(1), startUpNe(2), startUpFe(3), invalidMValueNe(4), invalidMValueFe(5), failedAssymetricNe(6), failedAssymetricFe(7), insufficientLinksNe(8), insufficientLinksFe(9), blockedNe(10), blockedFe(11), otherFailure(12), invalidImaVersionNe(13), invalidImaVersionFe(14)  

TmnxImaLnkState  
The TmnxImaLnkState indicates the current state of an IMA link.
TEXTUAL-CONVENTION    
  INTEGER notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8)  

TmnxImaLnkFailState  
The TmnxImaLnkFailState indicates the local failure status of a link belonging to an IMA group.
TEXTUAL-CONVENTION    
  INTEGER noFailure(1), imaLinkFailure(2), lifFailure(3), lodsFailure(4), misConnected(5), blocked(6), fault(7), farEndTxLinkUnusable(8), farEndRxLinkUnusable(9)  

TmnxImaTestState  
The TmnxImaTestState indicates the current state of the test pattern procedure.
TEXTUAL-CONVENTION    
  INTEGER disabled(1), operating(2), failed(3)  

TmnxImaGrpClockModes  
The TmnxImaGrpClockModes lists the types of clock modes available to IMA Groups.
TEXTUAL-CONVENTION    
  INTEGER ctc(1), itc(2)  

TmnxImaGrpVersion  
The TmnxImaGrpVersion lists the types of Ima versions available per IMA Groups.
TEXTUAL-CONVENTION    
  INTEGER oneDotZero(1), oneDotOne(2)  

TmnxMcMlpppClassIndex  
The TmnxMcMlpppClassIndex indicates the class of a Multiclass MLPPP bundle. For Multiclass MLPPP bundles with a non-zero tmnxBundleMlpppClassCount of classes, class index takes valid values from 0 to (tmnxBundleMlpppClassCount - 1) inclusive. For example a 4-class MLPPP bundle has 4 classes with indices 0, 1, 2, and 3.
TEXTUAL-CONVENTION    
  INTEGER 0..15  

TmnxMlpppEndpointIdClass  
TmnxMlpppEndpointIdClass indicates the MLPPP Endpoint Discriminator Class Field Type.
TEXTUAL-CONVENTION    
  INTEGER nullClass(0), localAddress(1), ipAddress(2), ieee802dot1GlobalMacAddress(3), pppMagicNumberBlock(4), publicSwitchedNetworkDirNumber(5)  

TmnxPortEntry  
SEQUENCE    
  TmnxPortID as tmnxPortPortID  
  TimeStamp as tmnxPortLastChangeTime  
  TmnxPortType as tmnxPortType  
  TmnxPortClass as tmnxPortClass  
  TItemLongDescription as tmnxPortDescription  
  TNamedItemOrEmpty as tmnxPortName  
  TNamedItemOrEmpty as tmnxPortAlias  
  TruthValue as tmnxPortUserAssignedMac  
  MacAddress as tmnxPortMacAddress  
  MacAddress as tmnxPortHwMacAddress  
  INTEGER as tmnxPortMode  
  INTEGER as tmnxPortEncapType  
  Unsigned32 as tmnxPortLagId  
  Unsigned32 as tmnxPortHoldTimeUp  
  Unsigned32 as tmnxPortHoldTimeDown  
  BITS as tmnxPortUpProtocols  
  TmnxPortConnectorType as tmnxPortConnectorType  
  INTEGER as tmnxPortTransceiverType  
  BITS as tmnxPortTransceiverCode  
  Unsigned32 as tmnxPortTransceiverLaserWaveLen  
  INTEGER as tmnxPortTransceiverDiagCapable  
  TNamedItemOrEmpty as tmnxPortTransceiverModelNumber  
  INTEGER as tmnxPortSFPConnectorCode  
  Unsigned32 as tmnxPortSFPVendorOUI  
  DateAndTime as tmnxPortSFPVendorManufactureDate  
  INTEGER as tmnxPortSFPMedia  
  TruthValue as tmnxPortSFPEquipped  
  TruthValue as tmnxPortEquipped  
  TruthValue as tmnxPortLinkStatus  
  TmnxPortAdminStatus as tmnxPortAdminStatus  
  TmnxPortOperStatus as tmnxPortOperStatus  
  TmnxPortState as tmnxPortState  
  TmnxPortState as tmnxPortPrevState  
  Unsigned32 as tmnxPortNumAlarms  
  TmnxAlarmState as tmnxPortAlarmState  
  RowPointer as tmnxPortLastAlarmEvent  
  TmnxActionType as tmnxPortClearAlarms  
  TNamedItemOrEmpty as tmnxPortSFPVendorSerialNum  
  TNamedItemOrEmpty as tmnxPortSFPVendorPartNum  
  TimeStamp as tmnxPortLastStateChanged  
  Unsigned32 as tmnxPortNumChannels  
  TNamedItemOrEmpty as tmnxPortNetworkEgrQueues  
  INTEGER as tmnxPortBundleNumber  
  TruthValue as tmnxPortIsLeaf  
  TmnxMDAChanType as tmnxPortChanType  
  TmnxPortID as tmnxPortParentPortID  
  OCTET STRING as tmnxPortOpticalCompliance  
  INTEGER as tmnxPortLoadBalanceAlgorithm  
  TNamedItemOrEmpty as tmnxPortEgrPortSchedPlcy  
  TimeStamp as tmnxPortLastClearedTime  
  TNamedItemOrEmpty as tmnxPortIngNamedPoolPlcy  
  TNamedItemOrEmpty as tmnxPortEgrNamedPoolPlcy  
  Unsigned32 as tmnxPortIngPoolPercentRate  
  Unsigned32 as tmnxPortEgrPoolPercentRate  
  TruthValue as tmnxPortDDMEventSuppression  
  INTEGER as tmnxPortSFPStatus  

TmnxPortTestEntry  
SEQUENCE    
  INTEGER as tmnxPortTestState  
  INTEGER as tmnxPortTestMode  
  Unsigned32 as tmnxPortTestParameter  
  INTEGER as tmnxPortTestLastResult  
  DateAndTime as tmnxPortTestStartTime  
  DateAndTime as tmnxPortTestEndTime  
  INTEGER as tmnxPortTestDuration  
  INTEGER as tmnxPortTestAction  

TmnxPortEtherEntry  
SEQUENCE    
  Unsigned32 as tmnxPortEtherMTU  
  INTEGER as tmnxPortEtherDuplex  
  INTEGER as tmnxPortEtherSpeed  
  INTEGER as tmnxPortEtherAutoNegotiate  
  INTEGER as tmnxPortEtherOperDuplex  
  Unsigned32 as tmnxPortEtherOperSpeed  
  Unsigned32 as tmnxPortEtherAcctPolicyId  
  TruthValue as tmnxPortEtherCollectStats  
  INTEGER as tmnxPortEtherMDIMDIX  
  INTEGER as tmnxPortEtherXGigMode  
  Integer32 as tmnxPortEtherEgressRate  
  Unsigned32 as tmnxPortEtherDot1qEtype  
  Unsigned32 as tmnxPortEtherQinqEtype  
  Integer32 as tmnxPortEtherIngressRate  
  TmnxPortEtherReportStatus as tmnxPortEtherReportAlarm  
  TmnxPortEtherReportStatus as tmnxPortEtherReportAlarmStatus  
  Counter32 as tmnxPortEtherPkts1519toMax  
  Counter32 as tmnxPortEtherHCOverPkts1519toMax  
  Counter64 as tmnxPortEtherHCPkts1519toMax  
  TruthValue as tmnxPortEtherLacpTunnel  
  TruthValue as tmnxPortEtherDownWhenLoopedEnabled  
  Unsigned32 as tmnxPortEtherDownWhenLoopedKeepAlive  
  Unsigned32 as tmnxPortEtherDownWhenLoopedRetry  
  INTEGER as tmnxPortEtherDownWhenLoopedState  
  Unsigned32 as tmnxPortEtherPBBEtype  
  BITS as tmnxPortEtherReasonDownFlags  

TmnxSonetEntry  
SEQUENCE    
  INTEGER as tmnxSonetSpeed  
  INTEGER as tmnxSonetClockSource  
  INTEGER as tmnxSonetFraming  
  BITS as tmnxSonetReportAlarm  
  Unsigned32 as tmnxSonetBerSdThreshold  
  Unsigned32 as tmnxSonetBerSfThreshold  
  TruthValue as tmnxSonetAps  
  TmnxPortAdminStatus as tmnxSonetApsAdminStatus  
  TmnxPortOperStatus as tmnxSonetApsOperStatus  
  OCTET STRING as tmnxSonetApsAuthKey  
  IpAddress as tmnxSonetApsNeighborAddr  
  TimeInterval as tmnxSonetApsAdvertiseInterval  
  TimeInterval as tmnxSonetApsAdvertiseTimeLeft  
  TimeInterval as tmnxSonetApsHoldTime  
  TimeInterval as tmnxSonetApsHoldTimeLeft  
  INTEGER as tmnxSonetLoopback  
  BITS as tmnxSonetReportAlarmStatus  
  INTEGER as tmnxSonetSectionTraceMode  
  OCTET STRING as tmnxSonetJ0String  
  Unsigned32 as tmnxSonetMonS1Byte  
  OCTET STRING as tmnxSonetMonJ0String  
  Unsigned32 as tmnxSonetMonK1Byte  
  Unsigned32 as tmnxSonetMonK2Byte  
  TruthValue as tmnxSonetSingleFiber  
  Unsigned32 as tmnxSonetHoldTimeUp  
  Unsigned32 as tmnxSonetHoldTimeDown  

TmnxSonetPathEntry  
SEQUENCE    
  RowStatus as tmnxSonetPathRowStatus  
  TimeStamp as tmnxSonetPathLastChangeTime  
  Unsigned32 as tmnxSonetPathMTU  
  TruthValue as tmnxSonetPathScramble  
  Unsigned32 as tmnxSonetPathC2Byte  
  OCTET STRING as tmnxSonetPathJ1String  
  INTEGER as tmnxSonetPathCRC  
  Unsigned32 as tmnxSonetPathOperMTU  
  Unsigned32 as tmnxSonetPathOperMRU  
  BITS as tmnxSonetPathReportAlarm  
  Unsigned32 as tmnxSonetPathAcctPolicyId  
  TruthValue as tmnxSonetPathCollectStats  
  BITS as tmnxSonetPathReportAlarmStatus  
  Unsigned32 as tmnxSonetPathMonC2Byte  
  OCTET STRING as tmnxSonetPathMonJ1String  
  INTEGER as tmnxSonetPathType  
  TmnxMDAChanType as tmnxSonetPathChildType  

TmnxPortTypeEntry  
SEQUENCE    
  TmnxPortType as tmnxPortTypeIndex  
  TNamedItemOrEmpty as tmnxPortTypeName  
  TItemDescription as tmnxPortTypeDescription  
  TruthValue as tmnxPortTypeStatus  

TmnxPortConnectTypeEntry  
SEQUENCE    
  TmnxPortConnectorType as tmnxPortConnectTypeIndex  
  TNamedItemOrEmpty as tmnxPortConnectTypeName  
  TItemDescription as tmnxPortConnectTypeDescription  
  TruthValue as tmnxPortConnectTypeStatus  

TmnxPortNetworkFCStatsEntry  
SEQUENCE    
  TFCName as tmnxPortFCStatsIndex  
  Counter64 as tmnxPortFCStatsIngFwdInProfPkts  
  Counter64 as tmnxPortFCStatsIngFwdOutProfPkts  
  Counter64 as tmnxPortFCStatsIngFwdInProfOcts  
  Counter64 as tmnxPortFCStatsIngFwdOutProfOcts  
  Counter64 as tmnxPortFCStatsIngDroInProfPkts  
  Counter64 as tmnxPortFCStatsIngDroOutProfPkts  
  Counter64 as tmnxPortFCStatsIngDroInProfOcts  
  Counter64 as tmnxPortFCStatsIngDroOutProfOcts  
  Counter64 as tmnxPortFCStatsEgrFwdInProfPkts  
  Counter64 as tmnxPortFCStatsEgrFwdOutProfPkts  
  Counter64 as tmnxPortFCStatsEgrFwdInProfOcts  
  Counter64 as tmnxPortFCStatsEgrFwdOutProfOcts  
  Counter64 as tmnxPortFCStatsEgrDroInProfPkts  
  Counter64 as tmnxPortFCStatsEgrDroOutProfPkts  
  Counter64 as tmnxPortFCStatsEgrDroInProfOcts  
  Counter64 as tmnxPortFCStatsEgrDroOutProfOcts  

TmnxDS3Entry  
SEQUENCE    
  INTEGER as tmnxDS3Buildout  
  TimeStamp as tmnxDS3LastChangeTime  
  INTEGER as tmnxDS3Type  

TmnxDS3ChannelEntry  
SEQUENCE    
  RowStatus as tmnxDS3ChannelRowStatus  
  INTEGER as tmnxDS3ChannelType  
  INTEGER as tmnxDS3ChannelFraming  
  TmnxDSXClockSource as tmnxDS3ChannelClockSource  
  INTEGER as tmnxDS3ChannelChannelized  
  INTEGER as tmnxDS3ChannelSubrateCSUMode  
  Unsigned32 as tmnxDS3ChannelSubrate  
  TmnxDSXIdleCycleFlags as tmnxDS3ChannelIdleCycleFlags  
  TmnxDS3Loopback as tmnxDS3ChannelLoopback  
  Integer32 as tmnxDS3ChannelBitErrorInsertionRate  
  TmnxDSXBertPattern as tmnxDS3ChannelBERTPattern  
  Unsigned32 as tmnxDS3ChannelBERTDuration  
  DisplayString as tmnxDS3ChannelMDLEicString  
  DisplayString as tmnxDS3ChannelMDLLicString  
  DisplayString as tmnxDS3ChannelMDLFicString  
  DisplayString as tmnxDS3ChannelMDLUnitString  
  DisplayString as tmnxDS3ChannelMDLPfiString  
  DisplayString as tmnxDS3ChannelMDLPortString  
  DisplayString as tmnxDS3ChannelMDLGenString  
  BITS as tmnxDS3ChannelMDLMessageType  
  TruthValue as tmnxDS3ChannelFEACLoopRespond  
  INTEGER as tmnxDS3ChannelCRC  
  Unsigned32 as tmnxDS3ChannelMTU  
  Unsigned32 as tmnxDS3ChannelOperMTU  
  TmnxDSXReportAlarm as tmnxDS3ChannelReportAlarm  
  TmnxDSXReportAlarm as tmnxDS3ChannelReportAlarmStatus  
  TimeStamp as tmnxDS3ChannelLastChangeTime  
  TruthValue as tmnxDS3ChannelInFEACLoop  
  DisplayString as tmnxDS3ChannelMDLMonPortString  
  DisplayString as tmnxDS3ChannelMDLMonGenString  
  TmnxDSXBertOperStatus as tmnxDS3ChannelBERTOperStatus  
  Unsigned32 as tmnxDS3ChannelBERTSynched  
  Counter64 as tmnxDS3ChannelBERTErrors  
  Counter64 as tmnxDS3ChannelBERTTotalBits  
  TruthValue as tmnxDS3ChannelScramble  
  Unsigned32 as tmnxDS3ChannelAcctPolicyId  
  TruthValue as tmnxDS3ChannelCollectStats  
  TmnxDSXClockSyncState as tmnxDS3ChannelClockSyncState  
  TmnxPortID as tmnxDS3ChannelClockMasterPortId  

TmnxDS1Entry  
SEQUENCE    
  RowStatus as tmnxDS1RowStatus  
  INTEGER as tmnxDS1Type  
  INTEGER as tmnxDS1Framing  
  TmnxDSXIdleCycleFlags as tmnxDS1IdleCycleFlags  
  TmnxDS1Loopback as tmnxDS1Loopback  
  TruthValue as tmnxDS1InvertData  
  Integer32 as tmnxDS1BitErrorInsertionRate  
  TmnxDSXBertPattern as tmnxDS1BERTPattern  
  Unsigned32 as tmnxDS1BERTDuration  
  TmnxDSXReportAlarm as tmnxDS1ReportAlarm  
  TmnxDSXReportAlarm as tmnxDS1ReportAlarmStatus  
  TimeStamp as tmnxDS1LastChangeTime  
  TmnxDSXClockSource as tmnxDS1ClockSource  
  TmnxDSXBertOperStatus as tmnxDS1BERTOperStatus  
  Unsigned32 as tmnxDS1BERTSynched  
  Counter64 as tmnxDS1BERTErrors  
  Counter64 as tmnxDS1BERTTotalBits  
  TruthValue as tmnxDS1RemoteLoopRespond  
  TruthValue as tmnxDS1InRemoteLoop  
  TmnxActionType as tmnxDS1InsertSingleBitError  
  INTEGER as tmnxDS1SignalMode  
  TmnxDSXClockSyncState as tmnxDS1ClockSyncState  
  TmnxPortID as tmnxDS1ClockMasterPortId  
  Unsigned32 as tmnxDS1BerSdThreshold  
  Unsigned32 as tmnxDS1BerSfThreshold  

TmnxDS0ChanGroupEntry  
SEQUENCE    
  RowStatus as tmnxDS0ChanGroupRowStatus  
  TmnxDs0ChannelList as tmnxDS0ChanGroupTimeSlots  
  INTEGER as tmnxDS0ChanGroupSpeed  
  INTEGER as tmnxDS0ChanGroupCRC  
  Unsigned32 as tmnxDS0ChanGroupMTU  
  Unsigned32 as tmnxDS0ChanGroupOperMTU  
  TimeStamp as tmnxDS0ChanGroupLastChangeTime  
  TmnxDSXIdleCycleFlags as tmnxDS0ChanGroupIdleCycleFlags  
  TruthValue as tmnxDS0ChanGroupScramble  
  Unsigned32 as tmnxDS0ChanGroupAcctPolicyId  
  TruthValue as tmnxDS0ChanGroupCollectStats  
  TmnxDSXIdleFillType as tmnxDS0ChanGroupPayloadFillType  
  Unsigned32 as tmnxDS0ChanGroupPayloadPattern  
  TmnxDSXIdleFillType as tmnxDS0ChanGroupSignalFillType  
  Unsigned32 as tmnxDS0ChanGroupSignalPattern  

TmnxBundleEntry  
SEQUENCE    
  TmnxBundleID as tmnxBundleBundleID  
  RowStatus as tmnxBundleRowStatus  
  INTEGER as tmnxBundleType  
  Unsigned32 as tmnxBundleMinimumLinks  
  Unsigned32 as tmnxBundleNumLinks  
  Unsigned32 as tmnxBundleNumActiveLinks  
  Unsigned32 as tmnxBundleMRRU  
  Unsigned32 as tmnxBundleOperMRRU  
  Unsigned32 as tmnxBundlePeerMRRU  
  Unsigned32 as tmnxBundleOperMTU  
  Unsigned32 as tmnxBundleRedDiffDelay  
  INTEGER as tmnxBundleRedDiffDelayAction  
  Unsigned32 as tmnxBundleYellowDiffDelay  
  TruthValue as tmnxBundleShortSequence  
  TimeStamp as tmnxBundleLastChangeTime  
  Unsigned32 as tmnxBundleFragmentThreshold  
  Unsigned32 as tmnxBundleUpTime  
  Counter32 as tmnxBundleInputDiscards  
  TmnxPortID as tmnxBundlePrimaryMemberPortID  
  TruthValue as tmnxBundleLFI  
  INTEGER as tmnxBundleProtectedType  
  TmnxBundleID as tmnxBundleParentBundle  

TmnxBundleMemberEntry  
SEQUENCE    
  RowStatus as tmnxBundleMemberRowStatus  
  TruthValue as tmnxBundleMemberActive  
  INTEGER as tmnxBundleMemberDownReason  
  Unsigned32 as tmnxBundleMemberUpTime  

TmnxPortToChannelEntry  
SEQUENCE    
  DisplayString as tmnxChannelIdxString  
  TmnxPortID as tmnxChannelPortID  

TmnxPortIngrMdaQosStatEntry  
SEQUENCE    
  Counter64 as tmnxPortIngrMdaQos00StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos00StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos01StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos01StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos02StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos02StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos03StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos03StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos04StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos04StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos05StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos05StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos06StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos06StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos07StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos07StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos08StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos08StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos09StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos09StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos10StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos10StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos11StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos11StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos12StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos12StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos13StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos13StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos14StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos14StatDropOcts  
  Counter64 as tmnxPortIngrMdaQos15StatDropPkts  
  Counter64 as tmnxPortIngrMdaQos15StatDropOcts  

TmnxSonetGroupEntry  
SEQUENCE    
  TmnxMDAChanType as tmnxSonetGroupType  
  TmnxPortID as tmnxSonetGroupParentPortID  
  TmnxMDAChanType as tmnxSonetGroupChildType  
  TNamedItemOrEmpty as tmnxSonetGroupName  

TmnxCiscoHDLCEntry  
SEQUENCE    
  Unsigned32 as tmnxCiscoHDLCKeepAliveInt  
  Unsigned32 as tmnxCiscoHDLCUpCount  
  Unsigned32 as tmnxCiscoHDLCDownCount  
  TmnxOperState as tmnxCiscoHDLCOperState  

TmnxCiscoHDLCStatsEntry  
SEQUENCE    
  Unsigned32 as tmnxCiscoHDLCDiscardStatInPkts  
  Unsigned32 as tmnxCiscoHDLCDiscardStatOutPkts  
  Unsigned32 as tmnxCiscoHDLCStatInPkts  
  Unsigned32 as tmnxCiscoHDLCStatOutPkts  
  Unsigned32 as tmnxCiscoHDLCStatInOctets  
  Unsigned32 as tmnxCiscoHDLCStatOutOctets  

TmnxFRDlcmiEntry  
SEQUENCE    
  INTEGER as tmnxFRDlcmiMode  
  INTEGER as tmnxFRDlcmiN392Dce  
  INTEGER as tmnxFRDlcmiN393Dce  
  INTEGER as tmnxFRDlcmiT392Dce  
  Counter32 as tmnxFRDlcmiTxStatusEnqMsgs  
  Counter32 as tmnxFRDlcmiRxStatusEnqMsgs  
  Counter32 as tmnxFRDlcmiStatusEnqMsgTimeouts  
  Counter32 as tmnxFRDlcmiTxStatusMsgs  
  Counter32 as tmnxFRDlcmiRxStatusMsgs  
  Counter32 as tmnxFRDlcmiStatusMsgTimeouts  
  Counter32 as tmnxFRDlcmiDiscardedMsgs  
  Counter32 as tmnxFRDlcmiInvRxSeqNumMsgs  

TmnxQosPoolAppEntry  
SEQUENCE    
  INTEGER as tmnxObjectType  
  TmnxPortID as tmnxObjectId  
  INTEGER as tmnxObjectAppType  
  TNamedItem as tmnxObjectAppPool  
  RowStatus as tmnxObjectAppPoolRowStatus  
  Integer32 as tmnxObjectAppResvCbs  
  TNamedItem as tmnxObjectAppSlopePolicy  
  Integer32 as tmnxObjectAppPoolSize  

TmnxATMIntfEntry  
SEQUENCE    
  INTEGER as tmnxATMIntfCellFormat  
  Integer32 as tmnxATMIntfMinVpValue  
  INTEGER as tmnxATMIntfMapping  

TmnxPortNetIngressStatsEntry  
SEQUENCE    
  TQueueId as tmnxPortNetIngressQueueIndex  
  Counter64 as tmnxPortNetIngressFwdInProfPkts  
  Counter64 as tmnxPortNetIngressFwdOutProfPkts  
  Counter64 as tmnxPortNetIngressFwdInProfOcts  
  Counter64 as tmnxPortNetIngressFwdOutProfOcts  
  Counter64 as tmnxPortNetIngressDroInProfPkts  
  Counter64 as tmnxPortNetIngressDroOutProfPkts  
  Counter64 as tmnxPortNetIngressDroInProfOcts  
  Counter64 as tmnxPortNetIngressDroOutProfOcts  

TmnxPortNetEgressStatsEntry  
SEQUENCE    
  TQueueId as tmnxPortNetEgressQueueIndex  
  Counter64 as tmnxPortNetEgressFwdInProfPkts  
  Counter64 as tmnxPortNetEgressFwdOutProfPkts  
  Counter64 as tmnxPortNetEgressFwdInProfOcts  
  Counter64 as tmnxPortNetEgressFwdOutProfOcts  
  Counter64 as tmnxPortNetEgressDroInProfPkts  
  Counter64 as tmnxPortNetEgressDroOutProfPkts  
  Counter64 as tmnxPortNetEgressDroInProfOcts  
  Counter64 as tmnxPortNetEgressDroOutProfOcts  

TmnxMcMlpppStatsEntry  
SEQUENCE    
  TmnxMcMlpppClassIndex as tmnxMcMlpppClassIndex  
  Counter32 as tmnxMcMlpppStatsIngressOct  
  Counter32 as tmnxMcMlpppStatsIngressPkt  
  Counter32 as tmnxMcMlpppStatsIngressErrPkt  
  Counter32 as tmnxMcMlpppStatsEgressOct  
  Counter32 as tmnxMcMlpppStatsEgressPkt  
  Counter32 as tmnxMcMlpppStatsEgressErrPkt  

TmnxBundleImaGrpEntry  
SEQUENCE    
  Unsigned32 as tmnxBundleImaGrpLnkActTimer  
  Unsigned32 as tmnxBundleImaGrpLnkDeactTimer  
  INTEGER as tmnxBundleImaGrpSymmetryMode  
  INTEGER as tmnxBundleImaGrpTxId  
  INTEGER as tmnxBundleImaGrpRxId  
  TmnxPortID as tmnxBundleImaGrpTxRefLnk  
  TmnxPortID as tmnxBundleImaGrpRxRefLnk  
  TmnxImaGrpState as tmnxBundleImaGrpSmNeState  
  TmnxImaGrpState as tmnxBundleImaGrpSmFeState  
  TmnxImaGrpFailState as tmnxBundleImaGrpSmFailState  
  Counter32 as tmnxBundleImaGrpSmDownSecs  
  Counter32 as tmnxBundleImaGrpSmOperSecs  
  Gauge32 as tmnxBundleImaGrpAvailTxCR  
  Gauge32 as tmnxBundleImaGrpAvailRxCR  
  Counter32 as tmnxBundleImaGrpNeFails  
  Counter32 as tmnxBundleImaGrpFeFails  
  Counter32 as tmnxBundleImaGrpTxIcpCells  
  Counter32 as tmnxBundleImaGrpRxIcpCells  
  Counter32 as tmnxBundleImaGrpErrorIcpCells  
  Counter32 as tmnxBundleImaGrpLostRxIcpCells  
  INTEGER as tmnxBundleImaGrpTxOamLablVal  
  INTEGER as tmnxBundleImaGrpRxOamLablVal  
  INTEGER as tmnxBundleImaGrpAlphaValue  
  INTEGER as tmnxBundleImaGrpBetaValue  
  INTEGER as tmnxBundleImaGrpGammaValue  
  TmnxImaGrpClockModes as tmnxBundleImaGrpNeClockMode  
  TmnxImaGrpClockModes as tmnxBundleImaGrpFeClockMode  
  TmnxImaGrpVersion as tmnxBundleImaGrpVersion  
  Unsigned32 as tmnxBundleImaGrpMaxConfBw  
  TmnxImaTestState as tmnxBundleImaGrpTestState  
  TmnxPortID as tmnxBundleImaGrpTestMember  
  INTEGER as tmnxBundleImaGrpTestPattern  
  Unsigned32 as tmnxBundleImaGrpDiffDelayMaxObs  
  Unsigned32 as tmnxBundleImaGrpLeastDelayLink  

TmnxBundleMemberImaEntry  
SEQUENCE    
  TmnxImaLnkState as tmnxBundleMemberImaNeTxState  
  TmnxImaLnkState as tmnxBundleMemberImaNeRxState  
  TmnxImaLnkState as tmnxBundleMemberImaFeTxState  
  TmnxImaLnkState as tmnxBundleMemberImaFeRxState  
  TmnxImaLnkFailState as tmnxBundleMemberImaNeRxFailState  
  TmnxImaLnkFailState as tmnxBundleMemberImaFeRxFailState  
  INTEGER as tmnxBundleMemberImaTxLid  
  INTEGER as tmnxBundleMemberImaRxLid  
  Counter32 as tmnxBundleMemberImaViolations  
  Counter32 as tmnxBundleMemberImaNeSevErrSecs  
  Counter32 as tmnxBundleMemberImaFeSevErrSecs  
  Counter32 as tmnxBundleMemberImaNeUnavailSecs  
  Counter32 as tmnxBundleMemberImaFeUnavailSecs  
  Counter32 as tmnxBundleMemberImaNeTxUnuseSecs  
  Counter32 as tmnxBundleMemberImaNeRxUnuseSecs  
  Counter32 as tmnxBundleMemberImaFeTxUnuseSecs  
  Counter32 as tmnxBundleMemberImaFeRxUnuseSecs  
  Counter32 as tmnxBundleMemberImaNeTxNumFails  
  Counter32 as tmnxBundleMemberImaNeRxNumFails  
  Counter32 as tmnxBundleMemberImaFeTxNumFails  
  Counter32 as tmnxBundleMemberImaFeRxNumFails  
  Counter32 as tmnxBundleMemberImaTxIcpCells  
  Counter32 as tmnxBundleMemberImaRxIcpCells  
  Counter32 as tmnxBundleMemberImaErrorIcpCells  
  Counter32 as tmnxBundleMemberImaLstRxIcpCells  
  Counter32 as tmnxBundleMemberImaOifAnomalies  
  TmnxImaTestState as tmnxBundleMemberImaRxTestState  
  INTEGER as tmnxBundleMemberImaRxTestPattern  
  Unsigned32 as tmnxBundleMemberImaRelDelay  

TmnxDS1PortEntry  
SEQUENCE    
  INTEGER as tmnxDS1PortBuildout  
  TimeStamp as tmnxDS1PortLastChangeTime  
  INTEGER as tmnxDS1PortType  
  INTEGER as tmnxDS1PortLineLength  
  INTEGER as tmnxDS1PortLbo  
  Integer32 as tmnxDS1PortDbGain  

TmnxPortSchedOverrideEntry  
SEQUENCE    
  RowStatus as tmnxPortSchedOverrideRowStatus  
  DisplayString as tmnxPortSchedOverrideSchedName  
  TimeStamp as tmnxPortSchedOverrideLastChanged  
  TPortSchedulerPIR as tmnxPortSchedOverrideMaxRate  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl1PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl1CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl2PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl2CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl3PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl3CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl4PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl4CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl5PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl5CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl6PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl6CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl7PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl7CIR  
  TPortSchedulerPIR as tmnxPortSchedOverrideLvl8PIR  
  TPortSchedulerCIR as tmnxPortSchedOverrideLvl8CIR  
  BITS as tmnxPortSchedOverrideFlags  

TmnxBPGrpAssocEntry  
SEQUENCE    
  TmnxBundleID as tmnxBPGrpAssocWorkingBundleID  
  TmnxBundleID as tmnxBPGrpAssocProtectBundleID  
  TmnxBundleID as tmnxBPGrpAssocActiveBundleID  

TmnxBundleMlpppEntry  
SEQUENCE    
  OCTET STRING as tmnxBundleMlpppEndpointID  
  TmnxMlpppEndpointIdClass as tmnxBundleMlpppEndpointIDClass  
  INTEGER as tmnxBundleMlpppClassCount  
  TMlpppQoSProfileId as tmnxBundleMlpppIngQoSProfId  
  TMlpppQoSProfileId as tmnxBundleMlpppEgrQoSProfId  

TmnxDigitalDiagMonitorEntry  
SEQUENCE    
  Integer32 as tmnxDDMTemperature  
  Integer32 as tmnxDDMTempLowWarning  
  Integer32 as tmnxDDMTempLowAlarm  
  Integer32 as tmnxDDMTempHiWarning  
  Integer32 as tmnxDDMTempHiAlarm  
  Integer32 as tmnxDDMSupplyVoltage  
  Integer32 as tmnxDDMSupplyVoltageLowWarning  
  Integer32 as tmnxDDMSupplyVoltageLowAlarm  
  Integer32 as tmnxDDMSupplyVoltageHiWarning  
  Integer32 as tmnxDDMSupplyVoltageHiAlarm  
  Integer32 as tmnxDDMTxBiasCurrent  
  Integer32 as tmnxDDMTxBiasCurrentLowWarning  
  Integer32 as tmnxDDMTxBiasCurrentLowAlarm  
  Integer32 as tmnxDDMTxBiasCurrentHiWarning  
  Integer32 as tmnxDDMTxBiasCurrentHiAlarm  
  Integer32 as tmnxDDMTxOutputPower  
  Integer32 as tmnxDDMTxOutputPowerLowWarning  
  Integer32 as tmnxDDMTxOutputPowerLowAlarm  
  Integer32 as tmnxDDMTxOutputPowerHiWarning  
  Integer32 as tmnxDDMTxOutputPowerHiAlarm  
  Integer32 as tmnxDDMRxOpticalPower  
  Integer32 as tmnxDDMRxOpticalPowerLowWarning  
  Integer32 as tmnxDDMRxOpticalPowerLowAlarm  
  Integer32 as tmnxDDMRxOpticalPowerHiWarning  
  Integer32 as tmnxDDMRxOpticalPowerHiAlarm  
  INTEGER as tmnxDDMRxOpticalPowerType  
  Integer32 as tmnxDDMAux1  
  Integer32 as tmnxDDMAux1LowWarning  
  Integer32 as tmnxDDMAux1LowAlarm  
  Integer32 as tmnxDDMAux1HiWarning  
  Integer32 as tmnxDDMAux1HiAlarm  
  INTEGER as tmnxDDMAux1Type  
  Integer32 as tmnxDDMAux2  
  Integer32 as tmnxDDMAux2LowWarning  
  Integer32 as tmnxDDMAux2LowAlarm  
  Integer32 as tmnxDDMAux2HiWarning  
  Integer32 as tmnxDDMAux2HiAlarm  
  INTEGER as tmnxDDMAux2Type  
  BITS as tmnxDDMFailedThresholds  
  TruthValue as tmnxDDMExternallyCalibrated  
  Unsigned32 as tmnxDDMExtCalRxPower4  
  Unsigned32 as tmnxDDMExtCalRxPower3  
  Unsigned32 as tmnxDDMExtCalRxPower2  
  Unsigned32 as tmnxDDMExtCalRxPower1  
  Unsigned32 as tmnxDDMExtCalRxPower0  
  Unsigned32 as tmnxDDMExtCalTxLaserBiasSlope  
  Integer32 as tmnxDDMExtCalTxLaserBiasOffset  
  Unsigned32 as tmnxDDMExtCalTxPowerSlope  
  Integer32 as tmnxDDMExtCalTxPowerOffset  
  Unsigned32 as tmnxDDMExtCalTemperatureSlope  
  Integer32 as tmnxDDMExtCalTemperatureOffset  
  Unsigned32 as tmnxDDMExtCalVoltageSlope  
  Integer32 as tmnxDDMExtCalVoltageOffset