
| RFC1155-SMI | RFC-1212 | RFC1213-MIB |
| ALTEON-ROOT-MIB | ALTEON-TIGON-SWITCH-MIB |
| IpAddress | Counter | Gauge |
| TimeTicks | OBJECT-TYPE | PhysAddress |
| DisplayString | switch | stats |
| information | agent | operCmds |
| agPortConfig | 1.3.6.1.4.1.1872.2.1.2.3 | ||
| OBJECT IDENTIFIER | |||
| agPortTableMaxEnt | 1.3.6.1.4.1.1872.2.1.2.3.1 | ||
| The maximum number of rows in the port configuration host table. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| agPortCurCfgTable | 1.3.6.1.4.1.1872.2.1.2.3.2 | ||
| The table of port configuration in the current_configuration block. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AgPortCurCfgTableEntry | |||
| agPortCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.2.3.2.1 | ||
| A row in the port table in the current_configuration block. | |||
| OBJECT-TYPE | |||
| AgPortCurCfgTableEntry | |||
| agPortCurCfgIndx | 1.3.6.1.4.1.1872.2.1.2.3.2.1.1 | ||
| The index of the row in port configurations table. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| agPortCurCfgPrefLink | 1.3.6.1.4.1.1872.2.1.2.3.2.1.2 | ||
| This is the preferred link. | |||
| OBJECT-TYPE | |||
| INTEGER | fast-ethernet(2), gigabit-ethernet(3) | ||
| agPortCurCfgBackLink | 1.3.6.1.4.1.1872.2.1.2.3.2.1.3 | ||
| This is the backup link. | |||
| OBJECT-TYPE | |||
| INTEGER | fast-ethernet(2), gigabit-ethernet(3), none(4) | ||
| agPortCurCfgState | 1.3.6.1.4.1.1872.2.1.2.3.2.1.4 | ||
| This is the state of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| agPortCurCfgVlanTag | 1.3.6.1.4.1.1872.2.1.2.3.2.1.5 | ||
| This is VLAN tag state of the port | |||
| OBJECT-TYPE | |||
| INTEGER | tagged(2), untagged(3) | ||
| agPortCurCfgStp | 1.3.6.1.4.1.1872.2.1.2.3.2.1.6 | ||
| This object is used to turn Spanning Tree on or off for the port. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortCurCfgRmon | 1.3.6.1.4.1.1872.2.1.2.3.2.1.7 | ||
| This object is used to turn RMON on or off on the port. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortCurCfgPVID | 1.3.6.1.4.1.1872.2.1.2.3.2.1.8 | ||
| The default VLAN ID for the port. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| agPortCurCfgFastEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.2.1.9 | ||
| This object is used to turn the autonegotiation on or off for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortCurCfgFastEthSpeed | 1.3.6.1.4.1.1872.2.1.2.3.2.1.10 | ||
| Selects the port speed for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | mbs10(2), mbs100(3), mbs10or100(4) | ||
| agPortCurCfgFastEthMode | 1.3.6.1.4.1.1872.2.1.2.3.2.1.11 | ||
| This object is used to select port mode for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | full-duplex(2), half-duplex(3), full-or-half-duplex(4) | ||
| agPortCurCfgFastEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.2.1.12 | ||
| Selects the port flow control for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | transmit(2), receive(3), both(4), none(5) | ||
| agPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.2.1.13 | ||
| This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortCurCfgGigEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.2.1.14 | ||
| This object is used to select port flow control for gigabit Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | transmit(2), receive(3), both(4), none(5) | ||
| agPortCurCfgPortName | 1.3.6.1.4.1.1872.2.1.2.3.2.1.15 | ||
| The switch port name. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..63) | ||
| agPortCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.2.3.2.1.16 | ||
| The switch port Bandwidth Management contract number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| agPortCurCfgDiscardNonIPs | 1.3.6.1.4.1.1872.2.1.2.3.2.1.17 | ||
| Enable or disable to discard all non-IP traffic on the switch port. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| agPortCurCfgLinkTrap | 1.3.6.1.4.1.1872.2.1.2.3.2.1.18 | ||
| Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| agPortNewCfgTable | 1.3.6.1.4.1.1872.2.1.2.3.3 | ||
| The table of port configuration in the new_configuration block. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AgPortNewCfgTableEntry | |||
| agPortNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.2.3.3.1 | ||
| A row in the port configuration table in the new_configuration block. | |||
| OBJECT-TYPE | |||
| AgPortNewCfgTableEntry | |||
| agPortNewCfgIndx | 1.3.6.1.4.1.1872.2.1.2.3.3.1.1 | ||
| The index of the row in port configurations table. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| agPortNewCfgPrefLink | 1.3.6.1.4.1.1872.2.1.2.3.3.1.2 | ||
| This is the preferred link. | |||
| OBJECT-TYPE | |||
| INTEGER | fast-ethernet(2), gigabit-ethernet(3) | ||
| agPortNewCfgBackLink | 1.3.6.1.4.1.1872.2.1.2.3.3.1.3 | ||
| This is the backup link. | |||
| OBJECT-TYPE | |||
| INTEGER | fast-ethernet(2), gigabit-ethernet(3), none(4) | ||
| agPortNewCfgState | 1.3.6.1.4.1.1872.2.1.2.3.3.1.4 | ||
| This is the state of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| agPortNewCfgVlanTag | 1.3.6.1.4.1.1872.2.1.2.3.3.1.5 | ||
| This is VLAN tag state of the port | |||
| OBJECT-TYPE | |||
| INTEGER | tagged(2), untagged(3) | ||
| agPortNewCfgStp | 1.3.6.1.4.1.1872.2.1.2.3.3.1.6 | ||
| This object is used to turn Spanning Tree on or off for the port. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortNewCfgRmon | 1.3.6.1.4.1.1872.2.1.2.3.3.1.7 | ||
| This object is used to turn RMON on or off on the port. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortNewCfgPVID | 1.3.6.1.4.1.1872.2.1.2.3.3.1.8 | ||
| The default VLAN ID for the port. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| agPortNewCfgFastEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.3.1.9 | ||
| This object is used to turn the autonegotiation on or off for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortNewCfgFastEthSpeed | 1.3.6.1.4.1.1872.2.1.2.3.3.1.10 | ||
| Selects the port speed for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | mbs10(2), mbs100(3), mbs10or100(4) | ||
| agPortNewCfgFastEthMode | 1.3.6.1.4.1.1872.2.1.2.3.3.1.11 | ||
| This object is used to select port mode for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | full-duplex(2), half-duplex(3), full-or-half-duplex(4) | ||
| agPortNewCfgFastEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.3.1.12 | ||
| Selects the port flow control for fast Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | transmit(2), receive(3), both(4), none(5) | ||
| agPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.3.1.13 | ||
| This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | on(2), off(3) | ||
| agPortNewCfgGigEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.3.1.14 | ||
| This object is used to select port flow control for gigabit Ethernet connection. | |||
| OBJECT-TYPE | |||
| INTEGER | transmit(2), receive(3), both(4), none(5) | ||
| agPortNewCfgPortName | 1.3.6.1.4.1.1872.2.1.2.3.3.1.15 | ||
| The switch port name. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..63) | ||
| agPortNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.2.3.3.1.16 | ||
| The switch port Bandwidth Management contract number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| agPortNewCfgDiscardNonIPs | 1.3.6.1.4.1.1872.2.1.2.3.3.1.17 | ||
| Enable or disable to discard all non-IP traffic on the switch port. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| agPortNewCfgLinkTrap | 1.3.6.1.4.1.1872.2.1.2.3.3.1.18 | ||
| Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| vlans | 1.3.6.1.4.1.1872.2.1.4 | ||
| OBJECT IDENTIFIER | |||
| vlanMaxEnt | 1.3.6.1.4.1.1872.2.1.4.1 | ||
| The maximum number of rows in the VLAN configuration table. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanCurCfgTable | 1.3.6.1.4.1.1872.2.1.4.2 | ||
| The table of VLAN configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VlanCurCfgTableEntry | |||
| vlanCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.4.2.1 | ||
| A row in the VLAN configuration table. | |||
| OBJECT-TYPE | |||
| VlanCurCfgTableEntry | |||
| vlanCurCfgVlanId | 1.3.6.1.4.1.1872.2.1.4.2.1.1 | ||
| The VLAN identifier. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| vlanCurCfgVlanName | 1.3.6.1.4.1.1872.2.1.4.2.1.2 | ||
| The VLAN name. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| vlanCurCfgPorts | 1.3.6.1.4.1.1872.2.1.4.2.1.3 | ||
| The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..16) | ||
| vlanCurCfgState | 1.3.6.1.4.1.1872.2.1.4.2.1.4 | ||
| Enable or disable a VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| vlanCurCfgJumbo | 1.3.6.1.4.1.1872.2.1.4.2.1.5 | ||
| Enable or Disable the Jumbo frame support for the VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| vlanCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.4.2.1.6 | ||
| Default contract number the VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanCurCfgStg | 1.3.6.1.4.1.1872.2.1.4.2.1.7 | ||
| The Spanning Tree Group for the VLAN. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanNewCfgTable | 1.3.6.1.4.1.1872.2.1.4.3 | ||
| The table of VLAN configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VlanNewCfgTableEntry | |||
| vlanNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.4.3.1 | ||
| A row in the VLAN configuration table. | |||
| OBJECT-TYPE | |||
| VlanNewCfgTableEntry | |||
| vlanNewCfgVlanId | 1.3.6.1.4.1.1872.2.1.4.3.1.1 | ||
| The VLAN identifier. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| vlanNewCfgVlanName | 1.3.6.1.4.1.1872.2.1.4.3.1.2 | ||
| The VLAN name. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| vlanNewCfgPorts | 1.3.6.1.4.1.1872.2.1.4.3.1.3 | ||
| The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..16) | ||
| vlanNewCfgState | 1.3.6.1.4.1.1872.2.1.4.3.1.4 | ||
| Enable or disable a VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| vlanNewCfgJumbo | 1.3.6.1.4.1.1872.2.1.4.3.1.5 | ||
| Enable or Disable the Jumbo frame support for the VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| vlanNewCfgAddPort | 1.3.6.1.4.1.1872.2.1.4.3.1.6 | ||
| The port to be added to the specified VLAN. A '0' value is returned when read. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanNewCfgRemovePort | 1.3.6.1.4.1.1872.2.1.4.3.1.7 | ||
| The port to be removed from the specified VLAN. A '0' value is returned when read. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanNewCfgDelete | 1.3.6.1.4.1.1872.2.1.4.3.1.8 | ||
| This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), delete(2) | ||
| vlanNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.4.3.1.9 | ||
| Default contract number for the VLAN. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| vlanNewCfgStg | 1.3.6.1.4.1.1872.2.1.4.3.1.10 | ||
| The Spanning Tree Group for the VLAN. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portmirroring | 1.3.6.1.4.1.1872.2.1.6 | ||
| OBJECT IDENTIFIER | |||
| pmCurCfgMonitoringPort | 1.3.6.1.4.1.1872.2.1.6.1 | ||
| The port number of the monitoring port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgMonitoringPort | 1.3.6.1.4.1.1872.2.1.6.2 | ||
| The port number of the monitoring port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgMirroredPort | 1.3.6.1.4.1.1872.2.1.6.3 | ||
| The port number of the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgMirroredPort | 1.3.6.1.4.1.1872.2.1.6.4 | ||
| The port number of the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgMonitoredTraffic | 1.3.6.1.4.1.1872.2.1.6.5 | ||
| The type of traffic to be monitored with respect to the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | none(2), received(3), transmitted(4), both(5) | ||
| pmNewCfgMonitoredTraffic | 1.3.6.1.4.1.1872.2.1.6.6 | ||
| The type of traffic to be monitored with respect to the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | none(2), received(3), transmitted(4), both(5) | ||
| pmCurCfgState | 1.3.6.1.4.1.1872.2.1.6.7 | ||
| The state of Port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| pmNewCfgState | 1.3.6.1.4.1.1872.2.1.6.8 | ||
| The state of Port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(2), disabled(3) | ||
| pmCurCfgTimeout | 1.3.6.1.4.1.1872.2.1.6.9 | ||
| The mirroring timeout value in seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..86400 | ||
| pmNewCfgTimeout | 1.3.6.1.4.1.1872.2.1.6.10 | ||
| The mirroring timeout value in seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..86400 | ||
| trunkgroup | 1.3.6.1.4.1.1872.2.1.7 | ||
| OBJECT IDENTIFIER | |||
| trunkGroupTableMaxSize | 1.3.6.1.4.1.1872.2.1.7.1 | ||
| The maximum number of entries in trunk group table. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupCurCfgTable | 1.3.6.1.4.1.1872.2.1.7.2 | ||
| The table of trunk group configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TrunkGroupCurCfgTableEntry | |||
| trunkGroupCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.7.2.1 | ||
| A row in the trunk group configuration table. | |||
| OBJECT-TYPE | |||
| TrunkGroupCurCfgTableEntry | |||
| trunkGroupCurCfgIndex | 1.3.6.1.4.1.1872.2.1.7.2.1.1 | ||
| The identifier of the trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupCurCfgPorts | 1.3.6.1.4.1.1872.2.1.7.2.1.2 | ||
| The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..16) | ||
| trunkGroupCurCfgState | 1.3.6.1.4.1.1872.2.1.7.2.1.3 | ||
| Enable or disable a trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| trunkGroupCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.7.2.1.4 | ||
| Default BW contract of a trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupNewCfgTable | 1.3.6.1.4.1.1872.2.1.7.3 | ||
| The table of trunk group configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TrunkGroupNewCfgTableEntry | |||
| trunkGroupNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.7.3.1 | ||
| A row in the trunk group configuration table. | |||
| OBJECT-TYPE | |||
| TrunkGroupNewCfgTableEntry | |||
| trunkGroupNewCfgIndex | 1.3.6.1.4.1.1872.2.1.7.3.1.1 | ||
| The identifier of the trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupNewCfgPorts | 1.3.6.1.4.1.1872.2.1.7.3.1.2 | ||
| The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..16) | ||
| trunkGroupNewCfgAddPort | 1.3.6.1.4.1.1872.2.1.7.3.1.3 | ||
| The port to be added in the trunk group. When read, 0 is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupNewCfgRemovePort | 1.3.6.1.4.1.1872.2.1.7.3.1.4 | ||
| The port to be deleted from the trunk group. when read, 0 is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| trunkGroupNewCfgState | 1.3.6.1.4.1.1872.2.1.7.3.1.5 | ||
| Enable or disable a trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| trunkGroupNewCfgDelete | 1.3.6.1.4.1.1872.2.1.7.3.1.6 | ||
| Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), delete(2) | ||
| trunkGroupNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.7.3.1.7 | ||
| Default BW contract of a trunk group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuStats | 1.3.6.1.4.1.1872.2.1.8.17 | ||
| OBJECT IDENTIFIER | |||
| portCpuStatsUtilTable | 1.3.6.1.4.1.1872.2.1.8.17.1 | ||
| The table of port CPU utilization. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PortCpuStatsUtilTableEntry | |||
| portCpuStatsUtilTableEntry | 1.3.6.1.4.1.1872.2.1.8.17.1.1 | ||
| A row in the port CPU utilization table. | |||
| OBJECT-TYPE | |||
| PortCpuStatsUtilTableEntry | |||
| portCpuStatsUtilIndx | 1.3.6.1.4.1.1872.2.1.8.17.1.1.1 | ||
| The port index. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| portCpuAStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.17.1.1.2 | ||
| The utilization of port CPU A over 1 second. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuBStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.17.1.1.3 | ||
| The utilization of port CPU B over 1 second. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuAStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.4 | ||
| The utilization of port CPU A over 4 seconds. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuBStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.5 | ||
| The utilization of port CPU B over 4 seconds. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuAStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.6 | ||
| The utilization of port CPU A over 64 seconds. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portCpuBStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.7 | ||
| The utilization of port CPU B over 64 seconds. It shows the percentage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| port-stats | 1.3.6.1.4.1.1872.2.1.8.26 | ||
| OBJECT IDENTIFIER | |||
| portStatsTable | 1.3.6.1.4.1.1872.2.1.8.26.1 | ||
| The table of port statistics. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PortStatsTableEntry | |||
| portStatsTableEntry | 1.3.6.1.4.1.1872.2.1.8.26.1.1 | ||
| A row in the port stats table. | |||
| OBJECT-TYPE | |||
| PortStatsTableEntry | |||
| portStatsIndx | 1.3.6.1.4.1.1872.2.1.8.26.1.1.1 | ||
| The port index. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| portStatsPhyIfInOctets | 1.3.6.1.4.1.1872.2.1.8.26.1.1.2 | ||
| The total number of octets received on the interface, including framing characters. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfInUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.3 | ||
| The number of subnetwork-unicast packets delivered to a higher-layer protocol. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.4 | ||
| The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfInDiscards | 1.3.6.1.4.1.1872.2.1.8.26.1.1.5 | ||
| The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfInErrors | 1.3.6.1.4.1.1872.2.1.8.26.1.1.6 | ||
| The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.1872.2.1.8.26.1.1.7 | ||
| The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutOctets | 1.3.6.1.4.1.1872.2.1.8.26.1.1.8 | ||
| The total number of octets transmitted out of the interface, including framing characters. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.9 | ||
| The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.10 | ||
| The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutDiscards | 1.3.6.1.4.1.1872.2.1.8.26.1.1.11 | ||
| The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutErrors | 1.3.6.1.4.1.1872.2.1.8.26.1.1.12 | ||
| The number of outbound packets that could not be transmitted because of errors. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutQLen | 1.3.6.1.4.1.1872.2.1.8.26.1.1.13 | ||
| The length of the output packet queue (in packets). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| portStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.14 | ||
| The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | |||
| OBJECT-TYPE | |||
| Counter | |||
| portStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.15 | ||
| The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | |||
| OBJECT-TYPE | |||
| Counter | |||
| port-info | 1.3.6.1.4.1.1872.2.1.9.1 | ||
| OBJECT IDENTIFIER | |||
| portInfoTable | 1.3.6.1.4.1.1872.2.1.9.1.1 | ||
| The table of port information. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PortInfoTableEntry | |||
| portInfoTableEntry | 1.3.6.1.4.1.1872.2.1.9.1.1.1 | ||
| A row in the port information table. | |||
| OBJECT-TYPE | |||
| PortInfoTableEntry | |||
| portInfoIndx | 1.3.6.1.4.1.1872.2.1.9.1.1.1.1 | ||
| The port index. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| portInfoSpeed | 1.3.6.1.4.1.1872.2.1.9.1.1.1.2 | ||
| The current operational speed of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | mbs10(2), mbs100(3), mbs1000(4), any(5) | ||
| portInfoMode | 1.3.6.1.4.1.1872.2.1.9.1.1.1.3 | ||
| The current operational mode of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | full-duplex(2), half-duplex(3) | ||
| portInfoFlowCtrl | 1.3.6.1.4.1.1872.2.1.9.1.1.1.4 | ||
| The current operational flow control of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | transmit(2), receive(3), both(4), none(5) | ||
| portInfoLink | 1.3.6.1.4.1.1872.2.1.9.1.1.1.5 | ||
| The current operational link status of the port. | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), disabled(3), inoperative(4) | ||
| portInfoPhyIfDescr | 1.3.6.1.4.1.1872.2.1.9.1.1.1.6 | ||
| A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| portInfoPhyIfType | 1.3.6.1.4.1.1872.2.1.9.1.1.1.7 | ||
| The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32) | ||
| portInfoPhyIfMtu | 1.3.6.1.4.1.1872.2.1.9.1.1.1.8 | ||
| The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| portInfoPhyIfPhysAddress | 1.3.6.1.4.1.1872.2.1.9.1.1.1.9 | ||
| The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | |||
| OBJECT-TYPE | |||
| PhysAddress | |||
| portInfoPhyIfOperStatus | 1.3.6.1.4.1.1872.2.1.9.1.1.1.10 | ||
| The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), testing(3) | ||
| portInfoPhyIfLastChange | 1.3.6.1.4.1.1872.2.1.9.1.1.1.11 | ||
| The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mirrOper | 1.3.6.1.4.1.1872.2.1.14.3 | ||
| OBJECT IDENTIFIER | |||
| mirrOperMonitoringPort | 1.3.6.1.4.1.1872.2.1.14.3.1 | ||
| The switch port where the mirrored traffic are sent to. A zero value indicates this field has not been configured. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mirrOperMirroredPort | 1.3.6.1.4.1.1872.2.1.14.3.2 | ||
| The switch port where the egress traffic to be mirrored. A zero value indicates this field has not been configured. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mirrOperType | 1.3.6.1.4.1.1872.2.1.14.3.3 | ||
| Type of packets to be sent to the monitor port. in = packets received at the mirrored port out = packets sent from the mirrored port both = packets sent and received by the mirrored port | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), in(2), out(3), both(4) | ||
| mirrOperTimeout | 1.3.6.1.4.1.1872.2.1.14.3.4 | ||
| The duration in seconds for activating the mirroring rule. Zero means forever. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..86400 | ||
| mirrOperState | 1.3.6.1.4.1.1872.2.1.14.3.5 | ||
| Enable or disable port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mirroring | 1.3.6.1.4.1.1872.2.1.18 | ||
| OBJECT IDENTIFIER | |||
| mirrPortMirr | 1.3.6.1.4.1.1872.2.1.18.1 | ||
| OBJECT IDENTIFIER | |||
| pmCurCfgPortMirrState | 1.3.6.1.4.1.1872.2.1.18.1.1 | ||
| The state of port-based port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| pmNewCfgPortMirrState | 1.3.6.1.4.1.1872.2.1.18.1.2 | ||
| The state of port-based port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| pmCurCfgPortMonitorTable | 1.3.6.1.4.1.1872.2.1.18.1.3 | ||
| The table of monitoring ports. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PmCurCfgPortMonitorEntry | |||
| pmCurCfgPortMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.1.3.1 | ||
| A row in the monitoring port table. | |||
| OBJECT-TYPE | |||
| PmCurCfgPortMonitorEntry | |||
| pmCurCfgPmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.3.1.1 | ||
| The monitoring port number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgPmirrMirrPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.3.1.2 | ||
| The mirrored port number | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgPmirrDirection | 1.3.6.1.4.1.1872.2.1.18.1.3.1.3 | ||
| The type of traffic to be monitored with respect to the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | in(1), out(2), both(3) | ||
| pmNewCfgPortMonitorTable | 1.3.6.1.4.1.1872.2.1.18.1.4 | ||
| The table of monitoring ports. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PmNewCfgPortMonitorEntry | |||
| pmNewCfgPortMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.1.4.1 | ||
| A row in the monitoring port table. | |||
| OBJECT-TYPE | |||
| PmNewCfgPortMonitorEntry | |||
| pmNewCfgPmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.4.1.1 | ||
| The monitoring port number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgPmirrMirrPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.4.1.2 | ||
| The mirrored port number | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgPmirrDirection | 1.3.6.1.4.1.1872.2.1.18.1.4.1.3 | ||
| The type of traffic to be monitored with respect to the mirrored port. | |||
| OBJECT-TYPE | |||
| INTEGER | in(1), out(2), both(3) | ||
| pmNewCfgPmirrDelete | 1.3.6.1.4.1.1872.2.1.18.1.4.1.4 | ||
| Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), delete(2) | ||
| mirrVlanMirr | 1.3.6.1.4.1.1872.2.1.18.2 | ||
| OBJECT IDENTIFIER | |||
| pmCurCfgVlanMirrState | 1.3.6.1.4.1.1872.2.1.18.2.1 | ||
| The state of vlan-based port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| pmNewCfgVlanMirrState | 1.3.6.1.4.1.1872.2.1.18.2.2 | ||
| The state of vlan-based port mirroring. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| pmCurCfgVlanMonitorTable | 1.3.6.1.4.1.1872.2.1.18.2.3 | ||
| The table of vlan based port mirroring. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PmCurCfgVlanMonitorEntry | |||
| pmCurCfgVlanMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.2.3.1 | ||
| A row in the monitoring vlan table. | |||
| OBJECT-TYPE | |||
| PmCurCfgVlanMonitorEntry | |||
| pmCurCfgVmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.2.3.1.1 | ||
| The monitoring port number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgVmirrMirrVlanIndex | 1.3.6.1.4.1.1872.2.1.18.2.3.1.2 | ||
| The mirrored vlan number | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmCurCfgVmirrDirection | 1.3.6.1.4.1.1872.2.1.18.2.3.1.3 | ||
| The type of traffic to be monitored with respect to the mirrored vlan. | |||
| OBJECT-TYPE | |||
| INTEGER | in(1), out(2), both(3) | ||
| pmNewCfgVlanMonitorTable | 1.3.6.1.4.1.1872.2.1.18.2.4 | ||
| The table of vlan-based port mirroring. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PmNewCfgVlanMonitorEntry | |||
| pmNewCfgVlanMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.2.4.1 | ||
| A row in the monitoring vlan table. | |||
| OBJECT-TYPE | |||
| PmNewCfgVlanMonitorEntry | |||
| pmNewCfgVmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.2.4.1.1 | ||
| The monitoring port number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgVmirrMirrVlanIndex | 1.3.6.1.4.1.1872.2.1.18.2.4.1.2 | ||
| The mirrored vlan number | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| pmNewCfgVmirrDirection | 1.3.6.1.4.1.1872.2.1.18.2.4.1.3 | ||
| The type of traffic to be monitored with respect to the mirrored vlan. | |||
| OBJECT-TYPE | |||
| INTEGER | in(1), out(2), both(3) | ||
| pmNewCfgVmirrDelete | 1.3.6.1.4.1.1872.2.1.18.2.4.1.4 | ||
| Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), delete(2) | ||
| spannTreeGrpCfg | 1.3.6.1.4.1.1872.2.1.19 | ||
| OBJECT IDENTIFIER | |||
| stgCurCfgTable | 1.3.6.1.4.1.1872.2.1.19.1 | ||
| The table of Spanning Tree Groups configuration in the current_config. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| StgCurCfgTableEntry | |||
| stgCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.19.1.1 | ||
| Information about a particular Spanning Tree Group configuration. | |||
| OBJECT-TYPE | |||
| StgCurCfgTableEntry | |||
| stgCurCfgIndex | 1.3.6.1.4.1.1872.2.1.19.1.1.1 | ||
| The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| stgCurCfgState | 1.3.6.1.4.1.1872.2.1.19.1.1.2 | ||
| Turn on of off Spanning Tree operation of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| stgCurCfgVlanBmap1 | 1.3.6.1.4.1.1872.2.1.19.1.1.3 | ||
| The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| stgCurCfgVlanBmap2 | 1.3.6.1.4.1.1872.2.1.19.1.1.4 | ||
| The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| stgNewCfgTable | 1.3.6.1.4.1.1872.2.1.19.2 | ||
| The table of Spanning Tree Groups configuration in the new_config. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| StgNewCfgTableEntry | |||
| stgNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.19.2.1 | ||
| Information about a particular Spanning Tree Group configuration. | |||
| OBJECT-TYPE | |||
| StgNewCfgTableEntry | |||
| stgNewCfgIndex | 1.3.6.1.4.1.1872.2.1.19.2.1.1 | ||
| The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| stgNewCfgState | 1.3.6.1.4.1.1872.2.1.19.2.1.2 | ||
| Turn on of off Spanning Tree operation of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| stgNewCfgDefaultCfg | 1.3.6.1.4.1.1872.2.1.19.2.1.3 | ||
| Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything. | |||
| OBJECT-TYPE | |||
| INTEGER | default-config(1) | ||
| stgNewCfgAddVlan | 1.3.6.1.4.1.1872.2.1.19.2.1.4 | ||
| The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgNewCfgRemoveVlan | 1.3.6.1.4.1.1872.2.1.19.2.1.5 | ||
| The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgNewCfgVlanBmap1 | 1.3.6.1.4.1.1872.2.1.19.2.1.6 | ||
| The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| stgNewCfgVlanBmap2 | 1.3.6.1.4.1.1872.2.1.19.2.1.7 | ||
| The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| stgCurCfgPortTable | 1.3.6.1.4.1.1872.2.1.19.3 | ||
| The table of Spanning Tree Group port configuration in the current_config. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| StgCurCfgPortTableEntry | |||
| stgCurCfgPortTableEntry | 1.3.6.1.4.1.1872.2.1.19.3.1 | ||
| Information about port configuration of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| StgCurCfgPortTableEntry | |||
| stgCurCfgStgIndex | 1.3.6.1.4.1.1872.2.1.19.3.1.1 | ||
| The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgCurCfgPortIndex | 1.3.6.1.4.1.1872.2.1.19.3.1.2 | ||
| The port identifier of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgCurCfgPortState | 1.3.6.1.4.1.1872.2.1.19.3.1.3 | ||
| Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| stgNewCfgPortTable | 1.3.6.1.4.1.1872.2.1.19.4 | ||
| The table of Spanning Tree Group port configuration in the new_config. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| StgNewCfgPortTableEntry | |||
| stgNewCfgPortTableEntry | 1.3.6.1.4.1.1872.2.1.19.4.1 | ||
| Information about port configuration of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| StgNewCfgPortTableEntry | |||
| stgNewCfgStgIndex | 1.3.6.1.4.1.1872.2.1.19.4.1.1 | ||
| The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgNewCfgPortIndex | 1.3.6.1.4.1.1872.2.1.19.4.1.2 | ||
| The port identifier of a particular Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| stgNewCfgPortState | 1.3.6.1.4.1.1872.2.1.19.4.1.3 | ||
| Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2) | ||
| AgPortCurCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as agPortCurCfgIndx | |||
| INTEGER as agPortCurCfgPrefLink | |||
| INTEGER as agPortCurCfgBackLink | |||
| INTEGER as agPortCurCfgState | |||
| INTEGER as agPortCurCfgVlanTag | |||
| INTEGER as agPortCurCfgStp | |||
| INTEGER as agPortCurCfgRmon | |||
| INTEGER as agPortCurCfgPVID | |||
| INTEGER as agPortCurCfgFastEthAutoNeg | |||
| INTEGER as agPortCurCfgFastEthSpeed | |||
| INTEGER as agPortCurCfgFastEthMode | |||
| INTEGER as agPortCurCfgFastEthFctl | |||
| INTEGER as agPortCurCfgGigEthAutoNeg | |||
| INTEGER as agPortCurCfgGigEthFctl | |||
| DisplayString as agPortCurCfgPortName | |||
| INTEGER as agPortCurCfgBwmContract | |||
| INTEGER as agPortCurCfgDiscardNonIPs | |||
| INTEGER as agPortCurCfgLinkTrap | |||
| AgPortNewCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as agPortNewCfgIndx | |||
| INTEGER as agPortNewCfgPrefLink | |||
| INTEGER as agPortNewCfgBackLink | |||
| INTEGER as agPortNewCfgState | |||
| INTEGER as agPortNewCfgVlanTag | |||
| INTEGER as agPortNewCfgStp | |||
| INTEGER as agPortNewCfgRmon | |||
| INTEGER as agPortNewCfgPVID | |||
| INTEGER as agPortNewCfgFastEthAutoNeg | |||
| INTEGER as agPortNewCfgFastEthSpeed | |||
| INTEGER as agPortNewCfgFastEthMode | |||
| INTEGER as agPortNewCfgFastEthFctl | |||
| INTEGER as agPortNewCfgGigEthAutoNeg | |||
| INTEGER as agPortNewCfgGigEthFctl | |||
| DisplayString as agPortNewCfgPortName | |||
| INTEGER as agPortNewCfgBwmContract | |||
| INTEGER as agPortNewCfgDiscardNonIPs | |||
| INTEGER as agPortNewCfgLinkTrap | |||
| VlanCurCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as vlanCurCfgVlanId | |||
| DisplayString as vlanCurCfgVlanName | |||
| OCTET STRING as vlanCurCfgPorts | |||
| INTEGER as vlanCurCfgState | |||
| INTEGER as vlanCurCfgJumbo | |||
| INTEGER as vlanCurCfgBwmContract | |||
| INTEGER as vlanCurCfgStg | |||
| VlanNewCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as vlanNewCfgVlanId | |||
| DisplayString as vlanNewCfgVlanName | |||
| OCTET STRING as vlanNewCfgPorts | |||
| INTEGER as vlanNewCfgState | |||
| INTEGER as vlanNewCfgJumbo | |||
| INTEGER as vlanNewCfgAddPort | |||
| INTEGER as vlanNewCfgRemovePort | |||
| INTEGER as vlanNewCfgDelete | |||
| INTEGER as vlanNewCfgBwmContract | |||
| INTEGER as vlanNewCfgStg | |||
| TrunkGroupCurCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as trunkGroupCurCfgIndex | |||
| OCTET STRING as trunkGroupCurCfgPorts | |||
| INTEGER as trunkGroupCurCfgState | |||
| INTEGER as trunkGroupCurCfgBwmContract | |||
| TrunkGroupNewCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as trunkGroupNewCfgIndex | |||
| OCTET STRING as trunkGroupNewCfgPorts | |||
| INTEGER as trunkGroupNewCfgAddPort | |||
| INTEGER as trunkGroupNewCfgRemovePort | |||
| INTEGER as trunkGroupNewCfgState | |||
| INTEGER as trunkGroupNewCfgDelete | |||
| INTEGER as trunkGroupNewCfgBwmContract | |||
| StgCurCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as stgCurCfgIndex | |||
| INTEGER as stgCurCfgState | |||
| OCTET STRING as stgCurCfgVlanBmap1 | |||
| OCTET STRING as stgCurCfgVlanBmap2 | |||
| StgNewCfgTableEntry | |||
| SEQUENCE | |||
| INTEGER as stgNewCfgIndex | |||
| INTEGER as stgNewCfgState | |||
| INTEGER as stgNewCfgDefaultCfg | |||
| INTEGER as stgNewCfgAddVlan | |||
| INTEGER as stgNewCfgRemoveVlan | |||
| OCTET STRING as stgNewCfgVlanBmap1 | |||
| OCTET STRING as stgNewCfgVlanBmap2 | |||
| StgCurCfgPortTableEntry | |||
| SEQUENCE | |||
| INTEGER as stgCurCfgStgIndex | |||
| INTEGER as stgCurCfgPortIndex | |||
| INTEGER as stgCurCfgPortState | |||
| StgNewCfgPortTableEntry | |||
| SEQUENCE | |||
| INTEGER as stgNewCfgStgIndex | |||
| INTEGER as stgNewCfgPortIndex | |||
| INTEGER as stgNewCfgPortState | |||
| PmCurCfgPortMonitorEntry | |||
| SEQUENCE | |||
| INTEGER as pmCurCfgPmirrMoniPortIndex | |||
| INTEGER as pmCurCfgPmirrMirrPortIndex | |||
| INTEGER as pmCurCfgPmirrDirection | |||
| PmNewCfgPortMonitorEntry | |||
| SEQUENCE | |||
| INTEGER as pmNewCfgPmirrMoniPortIndex | |||
| INTEGER as pmNewCfgPmirrMirrPortIndex | |||
| INTEGER as pmNewCfgPmirrDirection | |||
| INTEGER as pmNewCfgPmirrDelete | |||
| PmCurCfgVlanMonitorEntry | |||
| SEQUENCE | |||
| INTEGER as pmCurCfgVmirrMoniPortIndex | |||
| INTEGER as pmCurCfgVmirrMirrVlanIndex | |||
| INTEGER as pmCurCfgVmirrDirection | |||
| PmNewCfgVlanMonitorEntry | |||
| SEQUENCE | |||
| INTEGER as pmNewCfgVmirrMoniPortIndex | |||
| INTEGER as pmNewCfgVmirrMirrVlanIndex | |||
| INTEGER as pmNewCfgVmirrDirection | |||
| INTEGER as pmNewCfgVmirrDelete | |||
| PortCpuStatsUtilTableEntry | |||
| SEQUENCE | |||
| INTEGER as portCpuStatsUtilIndx | |||
| INTEGER as portCpuAStatsUtil1Second | |||
| INTEGER as portCpuBStatsUtil1Second | |||
| INTEGER as portCpuAStatsUtil4Seconds | |||
| INTEGER as portCpuBStatsUtil4Seconds | |||
| INTEGER as portCpuAStatsUtil64Seconds | |||
| INTEGER as portCpuBStatsUtil64Seconds | |||
| PortInfoTableEntry | |||
| SEQUENCE | |||
| INTEGER as portInfoIndx | |||
| INTEGER as portInfoSpeed | |||
| INTEGER as portInfoMode | |||
| INTEGER as portInfoFlowCtrl | |||
| INTEGER as portInfoLink | |||
| DisplayString as portInfoPhyIfDescr | |||
| INTEGER as portInfoPhyIfType | |||
| INTEGER as portInfoPhyIfMtu | |||
| PhysAddress as portInfoPhyIfPhysAddress | |||
| INTEGER as portInfoPhyIfOperStatus | |||
| TimeTicks as portInfoPhyIfLastChange | |||
| PortStatsTableEntry | |||
| SEQUENCE | |||
| INTEGER as portStatsIndx | |||
| Counter as portStatsPhyIfInOctets | |||
| Counter as portStatsPhyIfInUcastPkts | |||
| Counter as portStatsPhyIfInNUcastPkts | |||
| Counter as portStatsPhyIfInDiscards | |||
| Counter as portStatsPhyIfInErrors | |||
| Counter as portStatsPhyIfInUnknownProtos | |||
| Counter as portStatsPhyIfOutOctets | |||
| Counter as portStatsPhyIfOutUcastPkts | |||
| Counter as portStatsPhyIfOutNUcastPkts | |||
| Counter as portStatsPhyIfOutDiscards | |||
| Counter as portStatsPhyIfOutErrors | |||
| Gauge as portStatsPhyIfOutQLen | |||
| Counter as portStatsPhyIfInBroadcastPkts | |||
| Counter as portStatsPhyIfOutBroadcastPkts | |||