
CISCO-FCS-MIB
File:
CISCO-FCS-MIB.mib (65837 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoFcsMIB |
1.3.6.1.4.1.9.9.297 |
| The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB enables managers to configure and monitor FCS parameters. |
| MODULE-IDENTITY |
|
|
|
| fcsVsanDiscoverySpinLock |
1.3.6.1.4.1.9.9.297.1.1.1 |
| This object is used to facilitate modification of fcsVsanDiscoveryList2k, fcsVsanDiscovery- List4k, fcsVsanDiscoveryName and fcsStartDiscovery objects by multiple managers. The procedure for modifying the above four objects is as follows: 1. Determine new values for fcsVsanDiscoveryList2k, fcsVsanDiscoveryList4k and fcsVsanDiscoveryName. 2. Retrieve the value of fcsVsanDiscoverySpinLock. 3. Set the value of fcsVsanDiscoverySpinLock to the retrieved value, and (in the same PDU) the value of fcsVsanDiscoveryList2k to the new value. If the set fails for the fcsVsanDiscoverySpinLock object, go back to step 2. 4. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by one, and (in the same PDU) the value of fcsVsanDiscoveryList4k to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 5. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by two, and (in the same PDU) the value of fcsStartDiscovery to 'startDiscovery'. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. 6. Set the value of fcsVsanDiscoverySpinLock to the retrieved value incremented by three, and (in the same PDU) the value of fcsVsanDiscoveryName to its new value. If the set fails for fcsVsanDiscoverySpinLock, go back to step 2. Note that if it's possible to include fcsVsanDiscoveryList4k, fcsStartDiscovery, and/or fcsVsanDiscoveryName in the (Set Request) PDU of an earlier step, then step 4, 5 and/or 6, respectively , can be eliminated. |
| OBJECT-TYPE |
|
|
|
| |
TestAndIncr |
|
|
| fcsVsanDiscoveryName |
1.3.6.1.4.1.9.9.297.1.1.2 |
| The name of the discovery triggered by a manager. This object is sent along with the fcsDiscoveryCompleteNotify notification. This object cannot be modified when the discovery status is 'inProgress' on the selected set of VSANs as indicated by the fcsDiscoveryStatus object in the fcsDiscoveryStatusTable. |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
SIZE(0..32) |
|
| fcsVsanDiscoveryList2k |
1.3.6.1.4.1.9.9.297.1.1.3 |
| A bitmap which represents VSANs starting from VSAN id 1 to VSAN id 2048. Discovery will be carried out on all those VSANs for which the corresponding bits are set to 1 in this object. Note that if multiple managers set this object one after the other, the discovery is carried out on the union of the multiple requests. When read, the value of this object is the union of the in-progress discovery requests. |
| OBJECT-TYPE |
|
|
|
| |
FcList |
|
|
| fcsVsanDiscoveryList4k |
1.3.6.1.4.1.9.9.297.1.1.4 |
| A bitmap which represents VSANs starting from VSAN id 2049 to VSAN id 4096. Discovery will be carried out on all those VSANs for which the corresponding bits are set to 1 in this object. Note that if multiple managers set this object one after the other, the discovery is carried out on the union of the multiple requests. When read, the value of this object is the union of the in-progress discovery requests. |
| OBJECT-TYPE |
|
|
|
| |
FcList |
|
|
| fcsStartDiscovery |
1.3.6.1.4.1.9.9.297.1.1.5 |
| This object specifies whether a discovery cycle should be started by the Fabric Configuration Server. If this object is set to 'startDiscovery', then the discovery is started by the Fabric Configuration Server on those VSANs that have been specified by the fcsVsanDiscoveryList objects. No action is taken if this object is set to 'noOp'. The value of this object when read is always 'noOp'. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
startDiscovery(1), noOp(2) |
|
| fcsDiscoveryStatusEntry |
1.3.6.1.4.1.9.9.297.1.1.6.1 |
| An entry (conceptual row) in this table. The discovery status for a particular VSAN. |
| OBJECT-TYPE |
|
|
|
| |
FcsDiscoveryStatusEntry |
|
|
| fcsDiscoveryStatus |
1.3.6.1.4.1.9.9.297.1.1.6.1.1 |
| The status of the discovery on the local switch. Initially when the switch comes up, this object will be set to 'databaseInvalid' state on all VSANs. This indicates that a discovery needs to be done. If the manager sets the fcsStartDiscovery object to 'startDiscovery' for this VSAN, then the discovery will be triggered on. The state of this object will be set to 'inProgress' for this VSAN during the discovery. Once the discovery is completed on this VSAN, this object will be set to 'completed'. After the discovery is completed for the specified list of VSANs, the data is cached for an interval of time specified by fcsVsanDiscoveryTimeOut object. Once this interval of time expires, the data is lost and this object will be set to 'databaseInvalid' state for the specified list of VSANs. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inProgress(1), completed(2), databaseInvalid(3) |
|
| fcsDiscoveryCompleteTime |
1.3.6.1.4.1.9.9.297.1.1.6.1.2 |
| This object contains the value of sysUpTime when the last discovery was completed on this VSAN. This object will contain the value of zero before the first discovery on this VSAN. |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| fcsDiscoveryInvalidateCache2k |
1.3.6.1.4.1.9.9.297.1.1.8 |
| A bitmap which represents VSANs from 1 to 2048. The discovered cache will be invalidated on those VSANs for which the corresponding bits are set to 1 in this object. If the bit corresponding to a particular VSAN is set to 1 and if the value of fcsDiscoveryStatus for that VSAN is 'completed', then the discovery cache on that VSAN will be invalidated and the fcsDiscoveryStatus object for that VSAN will be set to 'databaseInvalid'. |
| OBJECT-TYPE |
|
|
|
| |
FcList |
|
|
| fcsDiscoveryInvalidateCache4k |
1.3.6.1.4.1.9.9.297.1.1.9 |
| A bitmap which represents VSANs from 2049 to 4096. The discovered cache will be invalidated on those VSANs for which the corresponding bits are set to 1 in this object. If the bit corresponding to a particular VSAN is set to 1 and if the value of fcsDiscoveryStatus for that VSAN is 'completed', then the discovery cache on that VSAN will be invalidated and the fcsDiscoveryStatus object for that VSAN will be set to 'databaseInvalid'. |
| OBJECT-TYPE |
|
|
|
| |
FcList |
|
|
| fcsIeTable |
1.3.6.1.4.1.9.9.297.1.1.11 |
| A table of Interconnect Elements. Interconnect Elements (IEs) are switches, hubs, bridges etc. By default, the Fabric Configuration Server will maintain detailed information pertaining only to the local switch. As far as remote topology is concerned, only the IE name, type and domain-id information will be maintained. If a discovery cycle is triggered on a set of VSANs, this table along with the Port and Platform tables will be populated with the discovered information. The discovered data will be retained in this table for at least fcsVsanDiscoveryTimeOut seconds after the completion of its discovery or till the discovered data is invalidated by setting the appropriate bits of fcsDiscoveryInvalidateCache2k/4k. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FcsIeEntry |
|
| fcsIeEntry |
1.3.6.1.4.1.9.9.297.1.1.11.1 |
| An entry (coneptual row) in this table. It gives information on an Interconnect Element. |
| OBJECT-TYPE |
|
|
|
| |
FcsIeEntry |
|
|
| fcsIeName |
1.3.6.1.4.1.9.9.297.1.1.11.1.1 |
| The WWN of an Interconnect Element. This object uniquely identifies an Interconnect Element on a VSAN. If the IE is a switch, then this object is the Node WWN of the switch. |
| OBJECT-TYPE |
|
|
|
| |
FcNameId |
|
|
| fcsIeDomainId |
1.3.6.1.4.1.9.9.297.1.1.11.1.3 |
| The Domain Id of this Interconnect Element. If the Domain Id has not been configured, then this object will have the value of zero. |
| OBJECT-TYPE |
|
|
|
| |
DomainIdOrZero |
|
|
| fcsIeMgmtId |
1.3.6.1.4.1.9.9.297.1.1.11.1.4 |
| The management identifer of this Interconnect Element. If the Interconnect Element is a switch, then this object will be the Domain Controller identifier of the switch. If the value of this object is unknown to the local system, then it will contain the null value x'00 00 00'. |
| OBJECT-TYPE |
|
|
|
| |
FcAddressId |
|
|
| fcsIeFabricName |
1.3.6.1.4.1.9.9.297.1.1.11.1.5 |
| The fabric name of this Interconnect Element. If the value of this object is unknown to the local system, then it will contain the null value x'00 00 00 00 00 00 00 00'. |
| OBJECT-TYPE |
|
|
|
| |
FcNameId |
|
|
| fcsIeLogicalName |
1.3.6.1.4.1.9.9.297.1.1.11.1.6 |
| The logical name of this Interconnect Element. If the value of this object is unknown to the local system, then it will contain the zero length string. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..255) |
|
| fcsIeMgmtAddrListIndex |
1.3.6.1.4.1.9.9.297.1.1.11.1.7 |
| The index of the management address list corresponding to this Interconnect Element. This object is an index into the fcsMgmtAddrListTable. Zero or more of the management address objects may be associated with an Interconnect Element object. |
| OBJECT-TYPE |
|
|
|
| |
ListIndexOrZero |
|
|
| fcsIeInfoList |
1.3.6.1.4.1.9.9.297.1.1.11.1.8 |
| The information list corresponding to this Interconnect Element. This object contains multiple substrings: the vendor name, model name/number, release code and any vendor specific information. Each substring is terminated with a null x'00'. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..256) |
|
| fcsMgmtAddrListTable |
1.3.6.1.4.1.9.9.297.1.1.12 |
| This table contains the set of management address lists currently referenced by any instance of the fcsIeMgmtAddrListIndex or fcsPlatformMgmtAddrListIndex objects. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FcsMgmtAddrListEntry |
|
| fcsMgmtAddrListEntry |
1.3.6.1.4.1.9.9.297.1.1.12.1 |
| An entry (conceptual row) in this table. A management address is represented by fcsMgmtAddrIndex. All management addresses which belong to the same list have a common fcsMgmtAddrListIndex. |
| OBJECT-TYPE |
|
|
|
| |
FcsMgmtAddrListEntry |
|
|
| fcsMgmtAddr |
1.3.6.1.4.1.9.9.297.1.1.12.1.3 |
| The management address corresponding to this entry. The format of this object may be based on the format of the Uniform Resource Locator (URL). For example, SNMP - snmp://ipaddress[:port#]. This object MUST be set to a valid value before or concurrently with setting the value of the corresponding instance of fcsMgmtAddrRowStatus to 'active'. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(0..255) |
|
| fcsPortListEntry |
1.3.6.1.4.1.9.9.297.1.1.13.1 |
| An entry (conceptual row) in this table. A port is represented by fcsPortName. All the ports that belong to the same list have the same fcsPortListIndex. |
| OBJECT-TYPE |
|
|
|
| |
FcsPortListEntry |
|
|
| fcsPortTable |
1.3.6.1.4.1.9.9.297.1.1.15 |
| This table contains information of all the ports. These ports are grouped into lists by the fcsPortListTable. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FcsPortEntry |
|
| fcsPortEntry |
1.3.6.1.4.1.9.9.297.1.1.15.1 |
| An entry (conceptual row) in this table. |
| OBJECT-TYPE |
|
|
|
| |
FcsPortEntry |
|
|
| fcsPortType |
1.3.6.1.4.1.9.9.297.1.1.15.1.2 |
| The type of this port. If it is a trunk port, the type of the port will be tePort. This is however not a standard port type. When information regarding such a port is sent using GS-3, it is represented in the GS-3 message and therefore in this table as an E_Port. |
| OBJECT-TYPE |
|
|
|
| |
FcPortTypes |
|
|
| fcsAttachPortNameListEntry |
1.3.6.1.4.1.9.9.297.1.1.16.1 |
| An entry (conceptual row) in this table. An Attached port name is represented by fcsAttachPortName. All the attach port names that belong to the same list have a common fcsAttachPortNameListIndex. |
| OBJECT-TYPE |
|
|
|
| |
FcsAttachPortNameListEntry |
|
|
| fcsAttachPortName |
1.3.6.1.4.1.9.9.297.1.1.16.1.2 |
| The attached port name corresponding to this entry. Zero or more of these names may be associated with a port object. The first 8 bytes of this object contain the WWN of the port followed by 2 reserved bytes. Following this is one byte of Port flags and one byte of Port type. See FC-GS3 for more details. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(12) |
|
| fcsPlatformEntry |
1.3.6.1.4.1.9.9.297.1.1.18.1 |
| An entry (conceptual row) in this table. A platform is uniquely represented by fcsPlatformIndex. There could be multiple platforms on a VSAN. A platform can contain multiple nodes. The node lists need to be created in the fcsNodeNameListTable. The fcsPlatformNodeNameListIndex object in this table points to the desired node list in the fcsNodeNameListTable. Similarly, the management addresses corresponding to the platform need to be created in the fcsMgmtAddrListTable. The fcsPlatformMgmtAddrListIndex object in this table points to the desired management address list in the fcsMgmtAddrListTable. Once a platform has been created, it can optionally be validated on a fabric-wide basis by setting the appropriate instance of fcsPlatformValidation object to 'validate'. |
| OBJECT-TYPE |
|
|
|
| |
FcsPlatformEntry |
|
|
| fcsNodeNameListEntry |
1.3.6.1.4.1.9.9.297.1.1.19.1 |
| An entry (conceptual row) in this table. Each node is represented uniquely by fcsNodeName. All nodes that belong to the same list have a common fcsNodeNameListIndex. |
| OBJECT-TYPE |
|
|
|
| |
FcsNodeNameListEntry |
|
|
| fcsReqRejNotifyEnable |
1.3.6.1.4.1.9.9.297.1.1.20 |
| This object specifies if the Fabric Configuration Server should issue a 'fcsReqRejNotify' notification. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| fcsDiscoveryCompleteNotifyEnable |
1.3.6.1.4.1.9.9.297.1.1.21 |
| This object specifies if the Fabric Configuration Server should issue a 'fcsDiscoveryCompleteNotify' notification. If the value of this object is 'true', then the notification is issued. If the value of this object is 'false', then the notification is not issued. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| fcsStats |
1.3.6.1.4.1.9.9.297.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| fcsStatsEntry |
1.3.6.1.4.1.9.9.297.1.2.2.1 |
| An entry (conceptual row) in this table. Some statistics for a particular VSAN. |
| OBJECT-TYPE |
|
|
|
| |
FcsStatsEntry |
|
|
| fcsTxGetReqs |
1.3.6.1.4.1.9.9.297.1.2.2.1.2 |
| The number of Get Requests sent by the Fabric Configuration Server on this VSAN to other servers in the fabric. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| fcsTxRscns |
1.3.6.1.4.1.9.9.297.1.2.2.1.7 |
| The number of Registered State Change Notifications (RSCNs) sent by the Fabric Configuration Server on this VSAN. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| fcsRxRscns |
1.3.6.1.4.1.9.9.297.1.2.2.1.8 |
| The number of Registered State Change Notifications (RSCNs) received by the Fabric Configuration Server on this VSAN. |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| fcsReqRejNotify |
1.3.6.1.4.1.9.9.297.1.4.0.1 |
| This notification is generated by the Fabric Configuration Server on this switch whenever it rejects a Fabric Configuration Server request. The Fabric Configuration Server should update the fcsRejReasonCode and fcsRejReasonCodeExplanation objects with the corresponding reason code and reason code explanation before sending the notification. |
| NOTIFICATION-TYPE |
|
|
|
| |
fcsRejReasonCode |
|
|
| |
fcsRejReasonCodeExplanation |
|
|
| fcsStatisticsGroup |
1.3.6.1.4.1.9.9.297.2.2.2 |
| A collection of objects for displaying the Fabric Configuration Server statistics information. |
| OBJECT-GROUP |
|
|
|
| fcsNotificationControlGroup |
1.3.6.1.4.1.9.9.297.2.2.3 |
| A collection of notification control and notification information objects for monitoring Fabric Configuration Server request rejection and discovery of remote toplogy information. |
| OBJECT-GROUP |
|
|
|
| fcsNotificationGroup |
1.3.6.1.4.1.9.9.297.2.2.4 |
| A collection of notifications for monitoring Fabric Configuration Server request rejection and discovery of remote toplogy information. |
| NOTIFICATION-GROUP |
|
|
|
| fcsNotificationGroupRev1 |
1.3.6.1.4.1.9.9.297.2.2.5 |
| A collection of notifications for monitoring Fabric Configuration Server request rejection, discovery of remote toplogy information and management address changes. |
| NOTIFICATION-GROUP |
|
|
|
| fcsNotificationControlGroupRev1 |
1.3.6.1.4.1.9.9.297.2.2.6 |
| A collection of notification control and notification information objects for monitoring Fabric Configuration Server request rejection and discovery of remote toplogy information. |
| OBJECT-GROUP |
|
|
|
Defined Objects
| CreatedBy |
|
| When an object with this syntax is specified as a columnar object, then each instance of the object indicates how the row which contains that instance was created. createdByMgmt(1) - indicates that the entry was created via SNMP. learnedviaGS3(2) - indicates that the entry was configured by GS-3. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
createdByMgmt(1), learnedviaGS3(2) |
|
| FcIeType |
|
| The type of Interconnect Element (IE). unknown(1) - unknown IE. other(2) - other type of IE. switch(3) - IE is a switch. hub(4) - IE is a hub. bridge(5) - IE is a bridge. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
unknown(1), other(2), switch(3), hub(4), bridge(5) |
|
| FcPortState |
|
| The state of a port. unknown(1) - unknown state. online(2) - port is in online state. offline(3) - port is in offline state. testing(4) - port is in testing state. fault(5) - port is faulty. other(6) - other state. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
unknown(1), online(2), offline(3), testing(4), fault(5), other(6) |
|
| FcFcsRejReasonExplanation |
|
| The reject reason code explanation. noAdditionalExplanation(1) - no additional expl. invNameIdForIEOrPort(2) - the format of IE or port name is invalid. ieListNotAvailable(3) - IE list is not available. ieTypeNotAvailable(4) - IE type is not available. domainIdNotAvailable(5) - Domain ID is not available. mgmtIdNotAvailable(6) - mgmt ID is not available. fabNameNotAvailable(7) - fabric name is not available. ielogNameNotAvailable(8) - IE logical name is not available. mgmtAddrListNotAvailable(9) - mgmt address list is not available. ieInfoListNotAvailable(10) - IE info list is not available. portListNotAvailable(11) - port list is not available. portTypeNotAvailable(12) - port type is not available. phyPortNumNotAvailable(13) - physical port number is not available. attPortNameListNotAvailable(14) - attached port name list is not available. portStateNotAvailable(15) - port state is not available. unableToRegIELogName(16) - not able to register IE logical name. platformNameNoExist(17) - platform name does not exist. platformNameAlreadyExists(18) - platform name already exists. platformNodeNameNoExists(19) - platform node name does not exist. platformNodeNameAlreadyExists(20) - platform node name already exists. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
noAdditionalExplanation(1), invNameIdForIEOrPort(2), ieListNotAvailable(3), ieTypeNotAvailable(4), domainIdNotAvailable(5), mgmtIdNotAvailable(6), fabNameNotAvailable(7), ielogNameNotAvailable(8), mgmtAddrListNotAvailable(9), ieInfoListNotAvailable(10), portListNotAvailable(11), portTypeNotAvailable(12), phyPortNumNotAvailable(13), attPortNameListNotAvailable(14), portStateNotAvailable(15), unableToRegIELogName(16), platformNameNoExist(17), platformNameAlreadyExists(18), platformNodeNameNoExists(19), platformNodeNameAlreadyExists(20) |
|
| FcsDiscoveryStatusEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as fcsDiscoveryStatus |
|
|
| |
TimeStamp as fcsDiscoveryCompleteTime |
|
|
| FcsIeEntry |
|
| SEQUENCE |
|
|
|
| |
FcNameId as fcsIeName |
|
|
| |
FcIeType as fcsIeType |
|
|
| |
DomainIdOrZero as fcsIeDomainId |
|
|
| |
FcAddressId as fcsIeMgmtId |
|
|
| |
FcNameId as fcsIeFabricName |
|
|
| |
OCTET STRING as fcsIeLogicalName |
|
|
| |
ListIndexOrZero as fcsIeMgmtAddrListIndex |
|
|
| |
OCTET STRING as fcsIeInfoList |
|
|
| |
ListIndexOrZero as fcsIePortListIndex |
|
|
| FcsMgmtAddrListEntry |
|
| SEQUENCE |
|
|
|
| |
ListIndex as fcsMgmtAddrListIndex |
|
|
| |
Unsigned32 as fcsMgmtAddrIndex |
|
|
| |
OCTET STRING as fcsMgmtAddr |
|
|
| |
CreatedBy as fcsMgmtAddrConfigSource |
|
|
| |
RowStatus as fcsMgmtAddrRowStatus |
|
|
| FcsPortListEntry |
|
| SEQUENCE |
|
|
|
| |
ListIndex as fcsPortListIndex |
|
|
| FcsPortEntry |
|
| SEQUENCE |
|
|
|
| |
FcNameId as fcsPortName |
|
|
| |
FcPortTypes as fcsPortType |
|
|
| |
FcPortTxTypes as fcsPortTXType |
|
|
| |
FcPortModuleTypes as fcsPortModuleType |
|
|
| |
Integer32 as fcsPortPhyPortNum |
|
|
| |
ListIndexOrZero as fcsPortAttachPortNameIndex |
|
|
| |
FcPortState as fcsPortState |
|
|
| FcsAttachPortNameListEntry |
|
| SEQUENCE |
|
|
|
| |
ListIndex as fcsAttachPortNameListIndex |
|
|
| |
OCTET STRING as fcsAttachPortName |
|
|
| FcsNodeNameListEntry |
|
| SEQUENCE |
|
|
|
| |
ListIndex as fcsNodeNameListIndex |
|
|
| |
FcNameId as fcsNodeName |
|
|
| |
CreatedBy as fcsNodeNameConfigSource |
|
|
| |
RowStatus as fcsNodeNameRowStatus |
|
|
| FcsStatsEntry |
|
| SEQUENCE |
|
|
|
| |
Counter32 as fcsRxGetReqs |
|
|
| |
Counter32 as fcsTxGetReqs |
|
|
| |
Counter32 as fcsRxRegReqs |
|
|
| |
Counter32 as fcsTxRegReqs |
|
|
| |
Counter32 as fcsRxDeregReqs |
|
|
| |
Counter32 as fcsTxDeregReqs |
|
|
| |
Counter32 as fcsTxRscns |
|
|
| |
Counter32 as fcsRxRscns |
|
|
| |
Counter32 as fcsRejects |
|
|