CISCO-LWAPP-MESH-MIB

File: CISCO-LWAPP-MESH-MIB.mib (45689 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB CISCO-LWAPP-AP-MIB CISCO-LWAPP-TC-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Integer32 Gauge32 NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TruthValue TimeStamp MacAddress
TimeInterval SnmpAdminString cLApSysMacAddress
cLApName CLDot11Channel ciscoMgmt

Defined Objects

ciscoLwappMeshMIB 1.3.6.1.4.1.9.9.616
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol (LWAPP) tunnel from Light-weight Access Points. This MIB represents information used in Wireless Mesh Network. MAP APs associates directly with RAP APs or with another MAP AP. Each association of AP (MAP-MAP or RAP-MAP) with another AP forms parent-child relationship. The deployment of the controller (referred to as CC in the diagram), mesh nodes (RAP and MAP) LWAPP APs, client(MS) and NMS appear as follows. +.......+ +.......+ + + + + + NMS + + NMS + + + + + +.......+ +.......+ . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + RAP + + RAP + + RAP + + RAP + + RAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MAP + + MS + + MAP + + MAP + + MAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . .. . . . . .. . . . . .. . . . . . . +......+ +......+ +......+ +......+. +......+ + + + + + + + + + + + MAP + + MAP + + MAP + + MAP + + MS + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters to the LWAPP APs. The APs encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Mobile Station ( MS ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Station and client are used interchangeably. Network Management System ( NMS ) The station from which the administrator manages the wired and wireless networks. Mesh Node A mesh node is defined as a physical or logical entity in the mesh network participating in forming the mesh backhaul. RAP and MAP are two types of mesh nodes supported in mesh network. Root AP (RAP) The AP forming the bridge between a wired and a mesh network with an Ethernet interface to the wired network and a 802.11 radio interface to the mesh network Mesh AP (MAP). The AP extending wireless coverage similar to a repeater in a mesh network and consists of a 802.11 uplink and a 802.11 downlink. On a single-radio backhaul, both uplink and downlink exist on the same radio and are logical links only. On a multi-radio backhaul, they may exist on different radios. Mesh Network Network starting with the wireless backhaul downlink of the RAP and all the entities below except any attached network to the Ethernet link of MAPs. A mesh network below a single RAP is also referred to as a 'Mesh Sector'.A mesh network consists of mesh nodes. A single mesh network is always augmented to a single wired network. Mesh Link A logical 802.11 link between two mesh nodes. A single link is point-to-point. All point-to-multipoint links are considered as multiple mesh links. Often referred to as mesh backhaul link. Mesh Backhaul A mesh backhaul consists of mesh nodes and mesh links terminating at a RAP. This necessarily creates a one- to-one relationship between a 'mesh network', 'mesh sector' and a 'mesh backhaul' where these terms can be used interchangeably. SNR Signal to Noise ratio on the 802.11 radio. Bridged network The bridged network is defined as the network(s) attached to the Ethernet port of any MAP. There can be multiple such networks attached to a single mesh network. Mesh Node Roaming A mesh node may change its parent mesh node naturally when the RF/network condition changes. Child Mesh node will re-associate and re-authenticate to new parent mesh node. Mesh Security supports two types of mesh node roaming. Intra-controller - LWAPP session is not lost. Inter-controller - LWAPP session is lost. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY    

ciscoLwappMeshMIBNotifs 1.3.6.1.4.1.9.9.616.0
OBJECT IDENTIFIER    

ciscoLwappMeshAuthFailure 1.3.6.1.4.1.9.9.616.0.1
A mesh node can fail to authorize if the MAC address of mesh node is not in the MAC filter list or security failure by authentication server. Reason is specified by 'clMeshAuthFailureReason'. This notification is sent by the agent when number of failures exceeds threshold defined by object 'clMeshMeshNodeAuthFailureThreshold'. Object 'clMeshAuthFailureNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNodeMacAddress  
  clMeshAuthFailureReason  

ciscoLwappMeshChildExcludedParent 1.3.6.1.4.1.9.9.616.0.2
This notification will be sent by agent when child mesh node exceeds threshold limit of number of discovery response timeouts defined by object 'clMeshMeshChildAssociationFailuresThreshold'. The child mesh node will not try to associate excluded parent mesh node for the interval defined by object 'clMeshMeshChildExcludedParentInterval'. The child mesh node will remember the excluded parent MAC address and when it joins the network it will inform the controller. 'cLApName' specifies child mesh node name. Child MAC address is sent as part of index. Object 'clMeshChildExcludedParentNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNodeParentMacAddress  
  clMeshPreviousParentMacAddress  
  cLApName  

ciscoLwappMeshParentChange 1.3.6.1.4.1.9.9.616.0.3
This notification is sent by the agent when a child mesh node changes its parent. Child mesh node will remember its previous parent and when it joins the network it will inform controller about change of its parent. 'cLApName' specifies child mesh node name. Child mesh node MAC address is sent as part of index. Object 'clMeshParentChangeNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNodeParentMacAddress  
  clMeshPreviousParentMacAddress  
  cLApName  

ciscoLwappMeshChildMoved 1.3.6.1.4.1.9.9.616.0.4
This notification is sent by the agent when a parent mesh node loses connection with its child mesh node. 'cLApName' specifies parent mesh node name. Parent and child MAC address are sent as part of index. Object 'clMeshChildMovedNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNeighborType  
  cLApName  

ciscoLwappMeshExcessiveParentChange 1.3.6.1.4.1.9.9.616.0.5
This notification is sent by the agent when child mesh node changes its parent frequently. Each mesh node keeps count of number of parent changes in fixed time. If it exceeds the threshold defined by 'clMeshExcessiveParentChangeThreshold' then child mesh node informs the controller. 'cLApName' specifies child mesh node name. Child and Parent MAC address are sent as part of index. Object 'clMeshExcessiveParentChangeNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNeighborType  
  cLApName  

ciscoLwappMeshOnsetSNR 1.3.6.1.4.1.9.9.616.0.6
This notification is sent by the agent when child mesh node detects lower SNR on backhaul link then defined by object 'clMeshSNRThresholdOnset'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'ciscoLwappMeshAbateSNR' notification will be sent to clear this notification. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshPoorSNRNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNeighborLinkSnr  
  cLApName  

ciscoLwappMeshAbateSNR 1.3.6.1.4.1.9.9.616.0.7
This notification is sent by the agent to clear 'ciscoLwappMeshOnsetSNR' notification when child mesh node detects SNR on backhaul link is higher then the object defined by 'clMeshSNRThresholdAbate'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshPoorSNRNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNeighborLinkSnr  
  cLApName  

ciscoLwappMeshConsoleLogin 1.3.6.1.4.1.9.9.616.0.8
This notification is sent by the agent when login on MAP console is successful or failure after three attempts. 'cLApName' specifies mesh node name. Object 'clMeshPoorSNRNotifEnabled' controls the generation of this notification.
NOTIFICATION-TYPE    
  clMeshNodeMacAddress  
  clMeshConsoleLoginStatus  
  cLApName  

ciscoLwappMeshMIBObjects 1.3.6.1.4.1.9.9.616.1
OBJECT IDENTIFIER    

ciscoLwappMeshConfig 1.3.6.1.4.1.9.9.616.1.1
OBJECT IDENTIFIER    

clMeshNodeTable 1.3.6.1.4.1.9.9.616.1.1.1
This table represents information about the 802.11 LWAPP Access Points that have joined the controller as part of a mesh network.
OBJECT-TYPE    
  SEQUENCE OF  
    ClMeshNodeEntry

clMeshNodeEntry 1.3.6.1.4.1.9.9.616.1.1.1.1
Each entry represents a conceptual row in this table. An entry is created when MAP joins the controller. The entry is removed when the mesh node lose their association with the controller due to loss of communication with controller or when a mesh node is reset.
OBJECT-TYPE    
  ClMeshNodeEntry  

clMeshNodeRole 1.3.6.1.4.1.9.9.616.1.1.1.1.1
This object represents the role of mesh AP which has joined the controller. See glossary section above for detail about MAP and RAP.
OBJECT-TYPE    
  INTEGER map(1), rap(2)  

clMeshNodeGroupName 1.3.6.1.4.1.9.9.616.1.1.1.1.2
This object represents the group name of the mesh sector. MAP AP will join the mesh sector which has the same group name configured on RAP AP.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..10)  

clMeshNodeBackhaul 1.3.6.1.4.1.9.9.616.1.1.1.1.3
This object represents 802.11 interface type of the backhaul link. See Mesh Link in glossary section for more detail on backhaul link. dot11a - 802.11a radio is used as backhaul link. dot11b - 802.11b radio is used as backhaul link. dot11g - 802.11g radio is used as backhaul link.
OBJECT-TYPE    
  INTEGER dot11a(1), dot11b(2), dot11g(3)  

clMeshNodeBackhaulDataRate 1.3.6.1.4.1.9.9.616.1.1.1.1.4
This object represents the rate at which packets are sent on the backhaul link.
OBJECT-TYPE    
  Unsigned32  

clMeshNodeEthernetBridge 1.3.6.1.4.1.9.9.616.1.1.1.1.5
A value of 'true' indicates ethernet bridging is enable on this mesh node. A value of 'false indicates ethernet bridging is not enable on this mesh node. Ethernet bridging can be enabled on RAP or MAP.
OBJECT-TYPE    
  TruthValue  

clMeshNodeEthernetLinkStatus 1.3.6.1.4.1.9.9.616.1.1.1.1.6
This object represents if the link is up or down on the ethernet port of the RAP or MAP. up - ethernet link is up. down - ethernet link is down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

clMeshNodePublicSafetyBackhaul 1.3.6.1.4.1.9.9.616.1.1.1.1.7
4.9Ghz considered to be public safety band and is limited to some service providers. A value of true indicates that 4.9 Ghz can be used on backhaul link by selecting channel on the 802.11a backhaul radio.
OBJECT-TYPE    
  TruthValue  

clMeshNodeParentMacAddress 1.3.6.1.4.1.9.9.616.1.1.1.1.8
This object represents the MAC address of a parent mesh node. In case of RAP this object will return 0000000000000.
OBJECT-TYPE    
  MacAddress  

clMeshNodeHeaterStatus 1.3.6.1.4.1.9.9.616.1.1.1.1.9
This object represents the heater status of the mesh node. on - heater is in operation off - heater is not operation.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

clMeshNodeInternalTemp 1.3.6.1.4.1.9.9.616.1.1.1.1.10
This object represents the internal temperature of mesh node in celsius.
OBJECT-TYPE    
  Integer32  

clMeshNodeType 1.3.6.1.4.1.9.9.616.1.1.1.1.11
This object represents the type of mesh node. indoor - Mesh node which is manufactured to be used inside the building. outdoor - Mesh node which can be used outside building in open environment.
OBJECT-TYPE    
  INTEGER indoor(1), outdoor(2)  

clMeshNodeHops 1.3.6.1.4.1.9.9.616.1.1.1.1.12
This object represents the number of hops a MAP mesh node is from RAP. When the clMeshNodeRole is set to 'RAP' this object will return a value of zero.
OBJECT-TYPE    
  Gauge32  

ciscoLwappMeshGlobalConfig 1.3.6.1.4.1.9.9.616.1.2
OBJECT IDENTIFIER    

clMeshNodeRange 1.3.6.1.4.1.9.9.616.1.2.1
This object represents the optimal distance in feet between RAP and MAP for backhaul link without degrading SNR value.
OBJECT-TYPE    
  Unsigned32 150..132000  

clMeshBackhaulClientAccess 1.3.6.1.4.1.9.9.616.1.2.2
This object represents if client access is to be enable on backhaul link. If AP has two radios,802.11a and 802.11bg, then radio which is used as backhaul link does not have client access. A value of 'true' indicates client access is present on backhaul link. If AP has only one radio then same radio is used for backhaul and client access.
OBJECT-TYPE    
  TruthValue  

clMeshMacFilterList 1.3.6.1.4.1.9.9.616.1.2.3
If this object is 'true' then any mesh node joining controller will be authenticated against this list. If this object is 'false' then mesh node can join controller even if mesh node MAC address is not in MAC filter list.
OBJECT-TYPE    
  TruthValue  

clMeshMeshNodeAuthFailureThreshold 1.3.6.1.4.1.9.9.616.1.2.4
This object represents the authorization failure threshold value. When the number of failures exceeds this value then 'ciscoLwappMeshAuthFailure' notification is raised.
OBJECT-TYPE    
  Unsigned32 1..30  

clMeshMeshChildAssociationFailuresThreshold 1.3.6.1.4.1.9.9.616.1.2.5
This object represents the number of failed association to controller occurred through a parent mesh node. When this values exceeds then 'ciscoLwappMeshChildExcludedParent' notification is raised.
OBJECT-TYPE    
  Unsigned32 10..30  

clMeshMeshChildExcludedParentInterval 1.3.6.1.4.1.9.9.616.1.2.6
This object represents the time interval during which a child mesh node will exclude a parent mesh node. During this interval child will not try to associate the controller through the parent mesh node.
OBJECT-TYPE    
  TimeInterval 18000..96000  

clMeshSNRThresholdAbate 1.3.6.1.4.1.9.9.616.1.2.7
This object represents the abate threshold value of SNR. This threshold value is use to determine if the SNR value seen by the child mesh node has reached acceptable level and is use to trigger the 'ciscoLwappMeshAbateSNR' notification.
OBJECT-TYPE    
  Unsigned32 3..50  

clMeshSNRThresholdOnset 1.3.6.1.4.1.9.9.616.1.2.8
This object represents the onset threshold value of SNR. This threshold value is use to determine if the SNR value seen by the child mesh node has reached below unacceptable level and is use to trigger the 'ciscoLwappMeshOnsetSNR' notification.
OBJECT-TYPE    
  Unsigned32 3..50  

clMeshSNRCheckTimeInterval 1.3.6.1.4.1.9.9.616.1.2.9
This object represents the time interval after which SNR value is checked by child mesh node.
OBJECT-TYPE    
  TimeInterval 18000..96000  

clMeshExcessiveParentChangeThreshold 1.3.6.1.4.1.9.9.616.1.2.10
This object represents the threshold for the number of times a child mesh node changes its parent. If number of parent change exceeds this value with in the time interval defined by object 'clMeshExcessiveParentChangeInterval' then the 'ciscoLwappMeshExcessiveParentChange' notification is raised.
OBJECT-TYPE    
  Unsigned32 1..20  

clMeshExcessiveParentChangeInterval 1.3.6.1.4.1.9.9.616.1.2.11
This object represents the time interval during which number of times a child mesh node changes its parent change is counted. If number of parent change exceeds the value defined by the object 'clMeshExcessiveParentChangeThreshold' with in this time interval then the 'ciscoLwappMeshExcessiveParentChange' notification is raised.
OBJECT-TYPE    
  TimeInterval 180000..360000  

clMeshBackgroundScan 1.3.6.1.4.1.9.9.616.1.2.12
A value of 'true' indicates the MAP mesh node scans its neighbors on different channel other than only its current channel on backhaul link. This scanning helps MAP mesh node to quickly determine its new parent on different channels.
OBJECT-TYPE    
  TruthValue  

clMeshAuthenticationMode 1.3.6.1.4.1.9.9.616.1.2.13
This object represents authentication mode of RAP and MAP mesh nodes in controller. none - no authentication is done. psk - pre shared key. Keys provided during manufacturing will be used for authentication of mesh node. eap - extensible authentication protocol is used to authenticate mesh node. A value of 'eap' indicates, authentication can happen by local-auth in controller or by RADIUS server configured in controller.
OBJECT-TYPE    
  INTEGER none(1), eap(2), psk(3)  

ciscoLwappMeshNeighborsStatus 1.3.6.1.4.1.9.9.616.1.3
OBJECT IDENTIFIER    

clMeshNeighborTable 1.3.6.1.4.1.9.9.616.1.3.1
This table represents information about neighbors of any mesh node. Neighbor AP can be on same or different mesh sector. Any mesh node is neighbor of a mesh node, if it can detect 802.11 signals on any channels. Child or parent mesh node also considers as neighbors.
OBJECT-TYPE    
  SEQUENCE OF  
    ClMeshNeighborEntry

clMeshNeighborEntry 1.3.6.1.4.1.9.9.616.1.3.1.1
An (conceptual) entry in this table is created when mesh node detects neighbor mesh nodes. Entries are removed when the mesh node does not detect AP as neighbor.
OBJECT-TYPE    
  ClMeshNeighborEntry  

clMeshNeighborMacAddress 1.3.6.1.4.1.9.9.616.1.3.1.1.1
This object represents MAC address of neighbor mesh node.
OBJECT-TYPE    
  MacAddress  

clMeshNeighborType 1.3.6.1.4.1.9.9.616.1.3.1.1.2
This object represents type of neighbor mesh node. parent - Neighbor mesh node is a parent mesh node of this mesh node. neighbor - Its a neighbor mesh node. It can be on same or different mesh-sector. excluded - Neighbor mesh node is excluded by this mesh node. child - Neighbor mesh node is child of this mesh node. beacon - Neighbor mesh node found by passive scanning. Default - Neighbor mesh node connected using a mismatched bridge group name
OBJECT-TYPE    
  BITS parent(0), neighbor(1), excluded(2), child(3), beacon(4), default(5)  

clMeshNeighborLinkSnr 1.3.6.1.4.1.9.9.616.1.3.1.1.3
This object represents the SNR value seen by this mesh node from neighbor mesh node.
OBJECT-TYPE    
  Integer32  

clMeshNeighborChannel 1.3.6.1.4.1.9.9.616.1.3.1.1.4
This object represents the channel on which neighbor mesh node is operating.
OBJECT-TYPE    
  CLDot11Channel  

clMeshNeighborUpdate 1.3.6.1.4.1.9.9.616.1.3.1.1.5
This object represents when the neighbor table was last updated. This value is represented as a instance of sysUp time.
OBJECT-TYPE    
  TimeStamp  

ciscoLwappMeshNotifControlConfig 1.3.6.1.4.1.9.9.616.1.4
OBJECT IDENTIFIER    

clMeshAuthFailureNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.1
This object controls the generation of 'ciscoLwappMeshAuthFailure' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshChildExcludedParentNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.2
This object controls the generation of 'ciscoLwappMeshChildExcludedParent' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshParentChangeNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.3
This object controls the generation of 'ciscoLwappMeshParentChange' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshChildMovedNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.4
This object controls the generation of 'ciscoLwappMeshChildMoved' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshExcessiveParentChangeNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.5
This object controls the generation of 'ciscoLwappMeshExcessiveParentChange' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshPoorSNRNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.6
This object controls the generation of 'ciscoLwappMeshOnsetSNR' and 'ciscoLwappMeshAbateSNR' notifications. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

clMeshConsoleLoginNotifEnabled 1.3.6.1.4.1.9.9.616.1.4.7
This object controls the generation of 'ciscoLwappMeshConsoleLogin' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated.
OBJECT-TYPE    
  TruthValue  

ciscoLwappMeshMIBNotifObjects 1.3.6.1.4.1.9.9.616.1.5
OBJECT IDENTIFIER    

clMeshNodeMacAddress 1.3.6.1.4.1.9.9.616.1.5.1
This object specifies the MAC address of a LWAPP AP.
OBJECT-TYPE    
  MacAddress  

clMeshAuthFailureReason 1.3.6.1.4.1.9.9.616.1.5.2
This object specifies the failure reason when a mesh node failed to authenticate through a controller to an Authentication Server. notInMacFilterList - MAC address of a mesh node is not configured in MAC filter list. securityFailure - Authentication server sent rejection for the mesh node.
OBJECT-TYPE    
  INTEGER notInMacFilterList(1), securityFailure(2)  

clMeshPreviousParentMacAddress 1.3.6.1.4.1.9.9.616.1.5.3
This object specifies the MAC address of previous parent Mesh Node.
OBJECT-TYPE    
  MacAddress  

clMeshConsoleLoginStatus 1.3.6.1.4.1.9.9.616.1.5.4
This object specifies the status of console login at MAP mesh node.
OBJECT-TYPE    
  INTEGER success(1), failure(2)  

ciscoLwappMeshMIBConform 1.3.6.1.4.1.9.9.616.2
OBJECT IDENTIFIER    

ciscoLwappMeshMIBCompliances 1.3.6.1.4.1.9.9.616.2.1
OBJECT IDENTIFIER    

ciscoLwappMeshMIBCompliance 1.3.6.1.4.1.9.9.616.2.1.1
The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module.
MODULE-COMPLIANCE    

ciscoLwappMeshMIBGroups 1.3.6.1.4.1.9.9.616.2.2
OBJECT IDENTIFIER    

ciscoLwappMeshConfigGroup 1.3.6.1.4.1.9.9.616.2.2.1
This collection of objects represent the global and mesh node specific configuration and monitor parameters.
OBJECT-GROUP    

ciscoLwappMeshNeighborStatusGroup 1.3.6.1.4.1.9.9.616.2.2.2
This collection of objects represent the neighbor status of any mesh node.
OBJECT-GROUP    

ciscoLwappMeshNotifControlGroup 1.3.6.1.4.1.9.9.616.2.2.3
This collection of objects represent the flags to control the generation of notification.
OBJECT-GROUP    

ciscoLwappMeshNotifObjsGroup 1.3.6.1.4.1.9.9.616.2.2.4
This collection of objects represent the information carried by the mesh network related notifications sent by the agent to a network management station.
OBJECT-GROUP    

ciscoLwappMeshNotifsGroup 1.3.6.1.4.1.9.9.616.2.2.5
This collection of objects represent the mesh network related notifications sent by the agent to a network management station.
NOTIFICATION-GROUP    

Defined Objects

ClMeshNodeEntry  
SEQUENCE    
  INTEGER as clMeshNodeRole  
  SnmpAdminString as clMeshNodeGroupName  
  INTEGER as clMeshNodeBackhaul  
  Unsigned32 as clMeshNodeBackhaulDataRate  
  TruthValue as clMeshNodeEthernetBridge  
  INTEGER as clMeshNodeEthernetLinkStatus  
  TruthValue as clMeshNodePublicSafetyBackhaul  
  MacAddress as clMeshNodeParentMacAddress  
  INTEGER as clMeshNodeHeaterStatus  
  Integer32 as clMeshNodeInternalTemp  
  INTEGER as clMeshNodeType  
  Gauge32 as clMeshNodeHops  

ClMeshNeighborEntry  
SEQUENCE    
  MacAddress as clMeshNeighborMacAddress  
  BITS as clMeshNeighborType  
  Integer32 as clMeshNeighborLinkSnr  
  CLDot11Channel as clMeshNeighborChannel  
  TimeStamp as clMeshNeighborUpdate