CISCO-LWAPP-ROGUE-MIB

File: CISCO-LWAPP-ROGUE-MIB.mib (8165 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-SMI CISCO-LWAPP-AP-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
TruthValue ciscoMgmt cLApName

Defined Objects

ciscoLwappRogueMIB 1.3.6.1.4.1.9.9.610
This MIB is intended to be implemented on all those devices operating as Central Controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB provides information about the Rogue APs and Clients that are detected by the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Rogue Any 802.11 device which is not part of the RF network is a Rogue device. Ad-hoc Network A set of mobile devices within direct communication range establishing a network among themselves for transmitting data, without the use of a Access point is called a ad-hoc network. Rogue Ad-hoc Client Any 802.11 client which is part of that ad-hoc network, but not in the trusted list. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
MODULE-IDENTITY    

ciscoLwappRogueMIBNotifs 1.3.6.1.4.1.9.9.610.0
OBJECT IDENTIFIER    

cLRogueAdhocRogueDetected 1.3.6.1.4.1.9.9.610.0.1
This notification is generated by the controller when a a rogue is detected. The name of the AP that detected this rogue is sent in the notification.
NOTIFICATION-TYPE    
  cLApName  

ciscoLwappRogueMIBObjects 1.3.6.1.4.1.9.9.610.1
OBJECT IDENTIFIER    

cLRogueConfig 1.3.6.1.4.1.9.9.610.1.1
OBJECT IDENTIFIER    

cLRoguePolicyConfig 1.3.6.1.4.1.9.9.610.1.1.1
OBJECT IDENTIFIER    

cLRogueAdhocRogueReportEnable 1.3.6.1.4.1.9.9.610.1.1.1.1
This object is used to turn on and off ad-hoc rogue reporting. Setting this object to 'true' will enable ad-hoc rogue reporting. Setting to 'false' will disable ad-hoc rogue reporting.
OBJECT-TYPE    
  TruthValue  

cLRogueAdhocRogueNotifEnabled 1.3.6.1.4.1.9.9.610.1.1.2
The object to control the generation of cLRogueAdhocDetected notification. A value of 'true' indicates that the agent generates cLRogueAdhocDetected notification. A value of 'false' indicates that the agent doesn't generate cLRogueAdhocDetected notification.
OBJECT-TYPE    
  TruthValue  

ciscoLwappRogueMIBConform 1.3.6.1.4.1.9.9.610.2
OBJECT IDENTIFIER    

ciscoLwappRogueMIBCompliances 1.3.6.1.4.1.9.9.610.2.1
OBJECT IDENTIFIER    

ciscoLwappRogueMIBCompliance 1.3.6.1.4.1.9.9.610.2.1.1
The compliance statement for the SNMP entities that implement the ciscoLwappRogueMIB module.
MODULE-COMPLIANCE    

ciscoLwappRogueMIBGroups 1.3.6.1.4.1.9.9.610.2.2
OBJECT IDENTIFIER    

ciscoLwappRogueConfigGroup 1.3.6.1.4.1.9.9.610.2.2.1
This collection of objects represent the rogue configuration on the controller.
OBJECT-GROUP    

ciscoLwappRogueNotifsGroup 1.3.6.1.4.1.9.9.610.2.2.2
This collection of objects specifies the notifications for rogue detection.
NOTIFICATION-GROUP