
CISCO-PORT-TRACK-MIB
File:
CISCO-PORT-TRACK-MIB.mib (9405 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoPortTrackMIB |
1.3.6.1.4.1.9.9.437 |
| A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the outage. The loss of this link may be an indirect failure to the end devices attached to the switch. The concept behind the Port-Track feature is to create a direct failure on the ports connected to end devices on event of such indirect failures. One more ports can be 'tracked' in terms of their operational status. The cptPortTrackTable lets the user associate which port(s) need to be tracked to the ports that will be tracking them. cptPortForceShutTable, lets the user configure the forced-shut mode of the linked-port. |
| MODULE-IDENTITY |
|
|
|
| cptConfig |
1.3.6.1.4.1.9.9.437.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| cptPortTrackTable |
1.3.6.1.4.1.9.9.437.1.1.1 |
| A table listing the linked ports and the configurations of their associated tracked ports. The configuration of each tracked port includes its interface index as well as a VSAN index if only one VSAN is to be tracked. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CptPortTrackEntry |
|
| cptPortTrackEntry |
1.3.6.1.4.1.9.9.437.1.1.1.1 |
| An entry in the cptPortTrack Table. |
| OBJECT-TYPE |
|
|
|
| |
CptPortTrackEntry |
|
|
| cptPortTrackVsanType |
1.3.6.1.4.1.9.9.437.1.1.1.1.3 |
| This objects denotes whether a single VSAN is being tracked on cptPortTrackTrackedPort or all the VSANs on that port are tracked. If the set to 'singleVsan', then the VSAN that will be tracked will be denoted by the instance of cptPortTrackVsanIndex. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
singleVsan(1), allVsans(2) |
|
| cptPortTrackVsanIndex |
1.3.6.1.4.1.9.9.437.1.1.1.1.4 |
| Valid only if the instance of cptPortTrackVsanType is 'singleVsan'. If cptPortTrackVsanType is 'allVsans', the instance of this object is irrelevant. |
| OBJECT-TYPE |
|
|
|
| |
VsanIndex |
|
|
| cptPortTrackRowStatus |
1.3.6.1.4.1.9.9.437.1.1.1.1.5 |
| This object is used to create or delete the row. When creating a row, the object cptPortTrackVsanType must be specified. If the value of cptPortTrackVsanType is 'singleVsan' then the object cptPortTrackVsanIndex also must be specified. If the value of cptPortTrackVsanType is 'allVsans', then cptPortTrackVsanIndex should not be specified in the create request. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| cptPortForceShutEntry |
1.3.6.1.4.1.9.9.437.1.1.2.1 |
| An entry in the cptPortForceShutTable. |
| OBJECT-TYPE |
|
|
|
| |
CptPortForceShutEntry |
|
|
| cptPortForceState |
1.3.6.1.4.1.9.9.437.1.1.2.1.1 |
| The forced-shut state of the linked port. When all the tracked ports corresponding to cptPortTrackLinkedPort, go down, cptPortTrackLinkedPort is brought down. The cptPortForceState, determines the manner in which this operation is performed. If 'false', cptPortTrackLinkedPort is brought down operationally only and is brought up again as soon as any one of the tracked ports comes up. If 'true', cptPortTrackLinkedPort is brought down administratively as well and the user has to manually bring the port up. i.e. the ifAdminStatus cptPortTrackLinkedPort needs to be set to 'up' by the user. |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
Defined Objects
| CptPortTrackEntry |
|
| SEQUENCE |
|
|
|
| |
InterfaceIndex as cptPortTrackLinkedPort |
|
|
| |
InterfaceIndex as cptPortTrackTrackedPort |
|
|
| |
INTEGER as cptPortTrackVsanType |
|
|
| |
VsanIndex as cptPortTrackVsanIndex |
|
|
| |
RowStatus as cptPortTrackRowStatus |
|
|
| CptPortForceShutEntry |
|
| SEQUENCE |
|
|
|
| |
TruthValue as cptPortForceState |
|
|