CISCO-SANTAP-MIB

File: CISCO-SANTAP-MIB.mib (10500 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CISCO-SMI ENTITY-MIB CISCO-VSAN-MIB
CISCO-ST-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE RowStatus
MODULE-COMPLIANCE OBJECT-GROUP ciscoMgmt
PhysicalIndex vsanIndex FcNameIdOrZero

Defined Objects

ciscoSanTapMIB 1.3.6.1.4.1.9.9.463
MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that provides a reliable copy of the data flowing between a set of one or more initiators and a set of one or more targets connected to the fabric. Adminstrator must configure the switch to create the Control Virtual Target (CVT) for the SanTap service. CVTs are used to implement the control path which process all SanTap service requests sent out by an appliance. Prior to requesting for SanTap service the appliance contacts the CVT, specifies the initiator and the target for replicating the data flowing between them. This MIB provides an interface to configure the CVT for the SanTap service on the fibre channel switch modules. Glossary of terms used in this MIB: Fabric - The set of physically connected fibre channel switches. VSAN - Virtual Storage Area Network, similar to a Virtual Fabric as defined by T11. WWN - World Wide Name. Mechanism of uniquely identifying the devices in Fibre Channel Networks. Appliance - It is a storage target, which can requests the SanTap service for the reliable copy of the data flowing between a specific host initiator and a target. CVT - Control Virtual Target. It is a logical target port that resides on the switch and is used for the purpose of communicating control traffic from an appliance.
MODULE-IDENTITY    

ciscoSanTapMIBObjects 1.3.6.1.4.1.9.9.463.1
OBJECT IDENTIFIER    

cstModuleTable 1.3.6.1.4.1.9.9.463.1.1
A table listing the modules on which SanTap service can be configured and CVT can be created by the user. The entry in the cstServiceConfigTable can only be created on a module present in the cstModuleTable.
OBJECT-TYPE    
  SEQUENCE OF  
    CstModuleEntry

cstModuleEntry 1.3.6.1.4.1.9.9.463.1.1.1
An entry in this table. The cstModuleId denotes the entPhysicalIndex of the module on which SanTap service can be configured.
OBJECT-TYPE    
  CstModuleEntry  

cstModuleId 1.3.6.1.4.1.9.9.463.1.1.1.1
This object specifies the physical index of the entity with entPhysicalClass as 'module' on which SanTap service can be configured by the user. This is same as the entPhysicalIndex of the module.
OBJECT-TYPE    
  PhysicalIndex  

cstServiceConfigTable 1.3.6.1.4.1.9.9.463.1.2
This table provides information about the list of all CVTs created and configured in the system. A new entry creation in this table, creates a CVT on the module specified by the corresponding instance index 'cstModuleId' and configures the CVT on the VSAN specified by the corresponding instance index 'vsanIndex'. A row creation in this table, with an existing module physical index but different 'vsanIndex' configures the already created CVT on the module into VSAN specified by the 'vsanIndex'. Deleting an entry from this table, unconfigures the CVT created on the module specified by the corresponding instance index 'cstModuleId' on the VSAN represented by the corresponding instance index 'vsanIndex'. If there are no more entries in this table for this module then the CVT will be deleted from the corresponding module. For example, If there is no entry in this table for a module pysical Index '22', then a new entry creation with cstModuleId '22' vsanIndex 'n1' creates a CVT on this module and configures the CVT on VSAN 'n1'. And a new row is created in this table. Any subsequent entry creation with cstModuleId '22' vsanIndex 'n2' only configures the previously created CVT on vsan 'n2' and a new row is created in this table. Similarly for any delete request with cstModuleId '22' vsanIndex 'n1'/'n2' unconfigures the CVT created on the vsan 'n1'/'n2' and the corresponding row is deleted from the table. If there is only one entry with cstModuleId '22' and vsan 'n' exists in the table, then any delete request with cstModuleId '22' vsan 'n' unconfigures the CVT on vsan 'n' and deletes the CVT. The corresponding row is deleted from the table.
OBJECT-TYPE    
  SEQUENCE OF  
    CstServiceConfigEntry

cstServiceConfigEntry 1.3.6.1.4.1.9.9.463.1.2.1
An entry containing information about a CVT configuration for the SanTap service. The 'cstModuleId' denotes the module on which the user wants the SanTap service to be configured and the CVT to be created. The index 'vsanIndex' represents the VSAN on which the CVT needs to be configured. It represents the VSAN on which CVT and the appliance communicate to establish the control path for processing the SanTap service requests.
OBJECT-TYPE    
  CstServiceConfigEntry  

cstCVTNodeWwn 1.3.6.1.4.1.9.9.463.1.2.1.1
This object represents the Node World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'.
OBJECT-TYPE    
  FcNameIdOrZero  

cstCVTPortWwn 1.3.6.1.4.1.9.9.463.1.2.1.2
This object represents the Port World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'.
OBJECT-TYPE    
  FcNameIdOrZero  

cstServiceConfigRowStatus 1.3.6.1.4.1.9.9.463.1.2.1.3
The status of this conceptual row.
OBJECT-TYPE    
  RowStatus  

ciscoSanTapMIBConformance 1.3.6.1.4.1.9.9.463.2
OBJECT IDENTIFIER    

ciscoSanTapMIBCompliances 1.3.6.1.4.1.9.9.463.2.1
OBJECT IDENTIFIER    

ciscoSanTapMIBCompliance 1.3.6.1.4.1.9.9.463.2.1.1
Compliance statement for entites which implement the CISCO SANTAP MIB.
MODULE-COMPLIANCE    

ciscoSanTapMIBGroups 1.3.6.1.4.1.9.9.463.2.2
OBJECT IDENTIFIER    

ciscoSanTapServiceConfigGroup 1.3.6.1.4.1.9.9.463.2.2.1
A Collection of objects to configure the CVT for SanTap service.
OBJECT-GROUP    

ciscoSanTapNotifications 1.3.6.1.4.1.9.9.463.3
OBJECT IDENTIFIER    

Defined Objects

CstModuleEntry  
SEQUENCE    
  PhysicalIndex as cstModuleId  

CstServiceConfigEntry  
SEQUENCE    
  FcNameIdOrZero as cstCVTNodeWwn  
  FcNameIdOrZero as cstCVTPortWwn  
  RowStatus as cstServiceConfigRowStatus