
CISCO-WWNMGR-MIB
File:
CISCO-WWNMGR-MIB.mib (15413 bytes)
Imported modules
Imported symbols
Defined Objects
| ciscoWwnmgrMIB |
1.3.6.1.4.1.9.9.286 |
| The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six different types of WWNs defined in ANSI Standard for Fibre Channel Framing and Signalling (FC-FS) Spec Rev 1.4. This mib provides the mechanism to configure and report WWNs for the fibre channel devices connected to a fibre channel switch. GLOSSARY : NAA Network Address Authority (NAA) address formats for WWN. OUI Organization Unique Identifier. VSAN Virtual Storage Area Network, similar to a VLAN. |
| MODULE-IDENTITY |
|
|
|
| wwnmVsanWwnTable |
1.3.6.1.4.1.9.9.286.1.1.9 |
| This table provides an option to configure user specified WWN for the VSANs. To enable the fibre channel switch to interoperate with other vendor switches on a VSAN, user needs to configure a WWN (based on the other vendor switch OUI) for the corresponding VSAN. To create a new entry in this table for a VSAN, a corresponding entry for that VSAN should exists in the vsanTable. Also, the value of the corresponding instance of vsanAdminState should be in 'suspended' state and the VSAN should interoperate in mode 4 (represented by vsanInterOperValue '4'). An entry from this table can be removed by any one of the following ways, a. Setting the corresponding instance wwnmVsanWwnRowStatus value to 'destroy'. b. Deleting the corresponding VSAN from vsanTable. c. Changing the corresponding VSAN configuration from interoperate mode 4 (represented by vsanInterOperValue '4') to any other value. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WwnmVsanWwnEntry |
|
| wwnmVsanWwnEntry |
1.3.6.1.4.1.9.9.286.1.1.9.1 |
| An entry (conceptual row) in this table. Each entry of this table represents the WWN configuration set for a VSAN. |
| OBJECT-TYPE |
|
|
|
| |
WwnmVsanWwnEntry |
|
|
| wwnmVsanWwn |
1.3.6.1.4.1.9.9.286.1.1.9.1.1 |
| The user configurable WWN for a VSAN. For row creation, it is mandatory to set the value of this object to a valid value. |
| OBJECT-TYPE |
|
|
|
| |
FcNameId |
|
|
| wwnmVsanWwnStorageType |
1.3.6.1.4.1.9.9.286.1.1.9.1.2 |
| The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| wwnmVsanWwnRowStatus |
1.3.6.1.4.1.9.9.286.1.1.9.1.3 |
| The status of this conceptual row. The value of this object cannot be 'active' unless the value of the corresponding instance of 'wwnmVsanWwn' is set to a valid value. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| wwnmType1WwnShortageNotify |
1.3.6.1.4.1.9.9.286.1.2.1.0.1 |
| A WWN shortage notification is generated whenever the number of available Type 1 WWNs 'wwnmType1AvailableWwns' reduces to either 20% or 10% or 0% of the maximum number of Type 1 WWNs 'wwnmType1MaxWwns'. After a shortage event is generated for a threshhold (say 20%), another such event will not be generated until after an availability event (see wwnmType1WwnAvailableNotify) is generated for the same threshold. |
| NOTIFICATION-TYPE |
|
|
|
| |
wwnmType1AvailableWwns |
|
|
| wwnmType1WwnAvailableNotify |
1.3.6.1.4.1.9.9.286.1.2.1.0.2 |
| An availability notification is generated whenever the number of available Type 1 WWNs (wwnmType1AvailableWwns) increases to either 25% or 15% or 5% of the maximum number of Type 1 WWNs (wwnmType1MaxWwns) after a wwnmType1WwnShortageNotify notification has been generated for either 20% or 10% or 5% respectively. |
| NOTIFICATION-TYPE |
|
|
|
| |
wwnmType1AvailableWwns |
|
|
| wwnmTypeOtherWwnShortageNotify |
1.3.6.1.4.1.9.9.286.1.2.1.0.3 |
| A WWN shortage notification is generated whenever the number of available Type Other WWNs 'wwnmTypeOtherAvailableWwns' reduces to either 20% or 10% or 0% of the maximum number of Type Other WWNs 'wwnmTypeOtherMaxWwns'. After a shortage event is generated for a threshhold (say 20%), another such event will not be generated until after an availability event (see wwnmType1WwnAvailableNotify) is generated for the same threshold. |
| NOTIFICATION-TYPE |
|
|
|
| |
wwnmTypeOtherAvailableWwns |
|
|
| wwnmTypeOtherWwnAvailableNotify |
1.3.6.1.4.1.9.9.286.1.2.1.0.4 |
| An availability notification is generated whenever the number of available Type Other WWNs (wwnmTypeOtherAvailableWwns) increases to either 25% or 15% or 5% of the maximum number of Type Other WWNs (wwnmTypeOtherMaxWwns) after a wwnmTypeOtherWwnShortageNotify notification has been generated for either 20% or 10% or 5% respectively. |
| NOTIFICATION-TYPE |
|
|
|
| |
wwnmTypeOtherAvailableWwns |
|
|
Defined Objects
| WwnmVsanWwnEntry |
|
| SEQUENCE |
|
|
|
| |
FcNameId as wwnmVsanWwn |
|
|
| |
StorageType as wwnmVsanWwnStorageType |
|
|
| |
RowStatus as wwnmVsanWwnRowStatus |
|
|