CTRON-Q-BRIDGE-MIB-EXT

File: CTRON-Q-BRIDGE-MIB-EXT.mib (15938 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BRIDGE-MIB
P-BRIDGE-MIB Q-BRIDGE-MIB CTRON-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP dot1dBasePortEntry EnabledStatus
VlanIndex dot1qVlanCurrentEntry PortList
ctVlanExt

Defined Objects

ctQBridgeMibExt 1.3.6.1.4.1.52.4.1.2.16.7
This MIB module defines a portion of the SNMP enterprise MIBs under the Cabletron enterprise OID pertaining to the configuration of switches that support IEEE 802.1Q [802.1Q] and the Q-BRIDGE-MIB [RFC2674].
MODULE-IDENTITY    

ctQBridgeMIBObjects 1.3.6.1.4.1.52.4.1.2.16.7.1
OBJECT IDENTIFIER    

ctDot1qPortVlanExtTable 1.3.6.1.4.1.52.4.1.2.16.7.1.1
A table containing per port control and status information for Cabletron proprietary extensions pertaining to VLAN configuration in the device.
OBJECT-TYPE    
  SEQUENCE OF  
    CtDot1qPortVlanEntry

ctDot1qPortVlanEntry 1.3.6.1.4.1.52.4.1.2.16.7.1.1.1
Information controlling proprietary VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
OBJECT-TYPE    
  CtDot1qPortVlanEntry  

ctDot1qPortDefaultForwardMode 1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.1
The method used to forward frames belonging to VLANs that do not have an entry in the dot1qVlanCurrentTable. When this is forwardNoFrames(1), the device will not forward traffic out this port, for any VLAN that does not have an entry in the dot1qVlanCurrentTable. When this is forwardAllFramesAsTagged(2), the device will forward all traffic out this port, with an 802.1Q VLAN tag, for any VLAN that does not have an entry in dot1qVlanCurrentTable. When this is forwardAllFramesAsUntagged(3), the device will forward all traffic out this port, without an 802.1Q VLAN tag, for any VLAN that does not have an entry in dot1qVlanCurrentTable. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.
OBJECT-TYPE    
  INTEGER forwardNoFrames(1), forwardAllFramesAsTagged(2), forwardAllFramesAsUntagged(3)  

ctDot1qPortDiscardTagged 1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.2
The method used to discard all incoming VLAN tagged frames for the port specified by the indexing of this entry. When this is enabled(1), the device will discard all 802.1Q tagged packets received on this port. When this is disabled(2), the device will NOT discard frames received on this port based on the presence of an 802.1Q tag. The behavior of this method in conjunction with the dot1qPortAcceptableFrameTypes leaf of Q-BRIDGE-MIB [RFC2674] is that of a logical OR.
OBJECT-TYPE    
  EnabledStatus  

ctDot1qPortReplaceTCI 1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.3
The method used to replace the Tag Control Information (TCI) field in all VLAN tagged frames received on the port specified by the indexing of this entry. When this is enabled(1), the device will replace the 802.1Q TCI field with results of the INGRESS stage of frame forwarding. Logically, this happens immediately prior to the PROGRESS stage of frame relay. When this is disabled(2), the device operates in compliance with the IEEE 802.1Q standard and honors the TCI field of incident frames.
OBJECT-TYPE    
  EnabledStatus  

ctDot1qVlanDynamicEgressTable 1.3.6.1.4.1.52.4.1.2.16.7.1.2
A table containing per VLAN control and status information for Cabletron proprietary egress extensions for VLAN configuration in the device.
OBJECT-TYPE    
  SEQUENCE OF  
    CtDot1qVlanDynamicEgressEntry

ctDot1qVlanDynamicEgressEntry 1.3.6.1.4.1.52.4.1.2.16.7.1.2.1
Information controlling proprietary VLAN configuration for a device.
OBJECT-TYPE    
  CtDot1qVlanDynamicEgressEntry  

ctDot1qVlanDynamicEgressIndex 1.3.6.1.4.1.52.4.1.2.16.7.1.2.1.1
The VLAN to which this entries' dynamic egress status applies.
OBJECT-TYPE    
  VlanIndex  

ctDot1qVlanDynamicEgressStatus 1.3.6.1.4.1.52.4.1.2.16.7.1.2.1.2
The state of Dynamic Egress operation on this VLAN. The value enabled(1) indicates that Dynamic Egress is enabled on this VLAN. If Dynamic Egress is enabled for a VLAN the following rules are applied to received frames: 1. If the frame is untagged, and 2. The frame is successfully classified to the specified VLAN, and 3. The port the frame was received on is not configured in dot1qVlanCurrentEgressPorts, dot1qVlanCurrentUntaggedPorts, or dot1qVlanForbiddenEgressPorts, for the classified VLAN, and 4. The port is configured for forwardNoFrames(1) in ctDot1qPortDefaultForwardMode (if supported), then 5. The port the frame was received on will be added to the dot1qVlanCurrentEgressPorts and dot1qVlanCurrentUntaggedPorts for the classified VLAN. If the VLAN was not preexisting the dot1qVlanStatus leaf for the VLAN will return other(1).
OBJECT-TYPE    
  EnabledStatus  

ctDot1qVlanCurrentExtTable 1.3.6.1.4.1.52.4.1.2.16.7.1.3
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management or created dynamically created. This table provides proprietary extensions to dot1qVlanCurrentTable as defined in RFC2674.
OBJECT-TYPE    
  SEQUENCE OF  
    CtDot1qVlanCurrentExtEntry

ctDot1qVlanCurrentEntryExt 1.3.6.1.4.1.52.4.1.2.16.7.1.3.1
Information for a VLAN configured into the device by (local or network) management or created dynamically.
OBJECT-TYPE    
  CtDot1qVlanCurrentExtEntry  

ctDot1qVlanForbidEgressPorts 1.3.6.1.4.1.52.4.1.2.16.7.1.3.1.1
The current set of ports which are prohibited from being included in the egress list for this VLAN. This object is a logical combination of dot1qVlanForbiddenEgressPorts and zero or more proprietary methods of forbidding egress on a per port per VLAN basis.
OBJECT-TYPE    
  PortList  

ctQBridgeConformance 1.3.6.1.4.1.52.4.1.2.16.7.2
OBJECT IDENTIFIER    

ctQBridgeGroups 1.3.6.1.4.1.52.4.1.2.16.7.2.1
OBJECT IDENTIFIER    

ctQBridgePortGroup 1.3.6.1.4.1.52.4.1.2.16.7.2.1.1
********* THIS GROUP IS DEPRECATED ********** A collection of objects providing port level control over the forwarding behavior of frames classified to unconfigured VLANs.
OBJECT-GROUP    

ctQBridgeVlanGroup 1.3.6.1.4.1.52.4.1.2.16.7.2.1.2
A collection of objects providing device level control over the addition and deletion of unconfigured ports to the egress lists of VLANs.
OBJECT-GROUP    

ctQBridgePortGroup2 1.3.6.1.4.1.52.4.1.2.16.7.2.1.3
A collection of objects providing port level control over the ingress and egress of frames received by the device.
OBJECT-GROUP    

ctQBridgeVlanCurrentForbidGroup 1.3.6.1.4.1.52.4.1.2.16.7.2.1.4
A collection of objects providing read-only current operational information pertaining to forbidden egress on a per VLAN basis.
OBJECT-GROUP    

ctQBridgePortReplaceTCIGroup 1.3.6.1.4.1.52.4.1.2.16.7.2.1.5
An object providing port level control TCI replacement.
OBJECT-GROUP    

ctQBridgeCompliances 1.3.6.1.4.1.52.4.1.2.16.7.2.2
OBJECT IDENTIFIER    

ctDot1qVlan 1.3.6.1.4.1.52.4.1.2.16.7.2.2.1
******** THIS COMPLIANCE IS DEPRECATED ******** The compliance statement for devices that support Cabletron extensions to Q-BRIDGE-MIB.
MODULE-COMPLIANCE    

ctDot1qVlan2 1.3.6.1.4.1.52.4.1.2.16.7.2.2.2
The compliance statement for devices that support Cabletron extensions to Q-BRIDGE-MIB.
MODULE-COMPLIANCE    

ctDot1qVlanCurentCompliance 1.3.6.1.4.1.52.4.1.2.16.7.2.2.3
The compliance statement for devices that support Cabletron extensions to the dot1qVlanCurrentTable of the Q-BRIDGE-MIB.
MODULE-COMPLIANCE    

Defined Objects

CtDot1qPortVlanEntry  
SEQUENCE    
  INTEGER as ctDot1qPortDefaultForwardMode  
  EnabledStatus as ctDot1qPortDiscardTagged  
  EnabledStatus as ctDot1qPortReplaceTCI  

CtDot1qVlanDynamicEgressEntry  
SEQUENCE    
  VlanIndex as ctDot1qVlanDynamicEgressIndex  
  EnabledStatus as ctDot1qVlanDynamicEgressStatus  

CtDot1qVlanCurrentExtEntry  
SEQUENCE    
  PortList as ctDot1qVlanForbidEgressPorts