ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB

File: ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB.mib (23995 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
BRIDGE-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 TruthValue MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP dot1dStpPortEntry
dot1dBasePortEntry dot1dStpDesignatedRoot dot1dBasePort
dot1dBasePortIfIndex dot1dBaseBridgeAddress EnabledStatus
dot1qTpFdbPort etsysModules

Defined Objects

etsysIetfBridgeMibExtMIB 1.3.6.1.4.1.5624.1.2.31
This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to proprietary extensions to the IETF BRIDGE-MIB as specified in RFC1493.
MODULE-IDENTITY    

etsysIetfBridgeMibExt 1.3.6.1.4.1.5624.1.2.31.1
OBJECT IDENTIFIER    

etsysIetfBridgeDot1Notifications 1.3.6.1.4.1.5624.1.2.31.1.0
OBJECT IDENTIFIER    

etsysIetfBridgeDot1qFdbNewLearnedAddr 1.3.6.1.4.1.5624.1.2.31.1.0.1
This notification indicates that a new entry has been created in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3).
NOTIFICATION-TYPE    
  dot1qTpFdbPort  

etsysIetfBridgeDot1dSpanGuardPortBlocked 1.3.6.1.4.1.5624.1.2.31.1.0.2
This notification indicates that a bridge port has been placed in the blocking state by the SpanGuard feature.
NOTIFICATION-TYPE    
  dot1dBasePort  
  dot1dBasePortIfIndex  

etsysIetfBridgeDot1dBackupRootActivation 1.3.6.1.4.1.5624.1.2.31.1.0.3
This notification indicates that the BackupRoot feature has activated on this bridge. When multiple spanning trees exist the values of etsysMstpMstId, etsysMstpBridgePriority, and etsysMstpDesignatedRoot for the applicable spanning tree SHOULD be encoded as well.
NOTIFICATION-TYPE    
  dot1dBaseBridgeAddress  
  dot1dStpDesignatedRoot  

etsysIetfBridgeDot1dStp 1.3.6.1.4.1.5624.1.2.31.1.1
OBJECT IDENTIFIER    

etsysIetfBridgeDot1dStpPortTable 1.3.6.1.4.1.5624.1.2.31.1.1.1
Extensions to the table that contains port-specific information for the Spanning Tree Protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIetfBridgeDot1dStpPortEntry

etsysIetfBridgeDot1dStpPortEntry 1.3.6.1.4.1.5624.1.2.31.1.1.1.1
A list of extensions to the information maintained by every port about the Spanning Tree Protocol state for that port.
OBJECT-TYPE    
  EtsysIetfBridgeDot1dStpPortEntry  

etsysIetfBridgeDot1dStpPortStpEnable 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.1
The enabled/disabled status of the Spanning Tree protocol on the port.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dStpPortSpanGuardBlocking 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.2
The state of the port with respect to the SpanGuard feature. true(1) - this port is being held in the blocking state by the SpanGuard feature. false(2) - this port is not being held in the blocking state by the SpanGuard feature. When this object has a value of true(1) setting its value to false(2) will cause the SpanGuard feature to no longer hold the port in the blocking state. All other set operations on this object are undefined and MUST NOT have any affect.
OBJECT-TYPE    
  TruthValue  

etsysIetfBridgeDot1dStpPortCistRoleValue 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.3
Indicates this port's role on the CIST. disabled -- this port has no role on the CIST. root -- this port has the role of root port on the CIST. designated -- this port has the role of designated port on the CIST. alternate -- this port has the role of alternate port on the CIST. backUp -- this port has the role of backup port on the CIST.
OBJECT-TYPE    
  INTEGER disabled(1), root(2), designated(3), alternate(4), backUp(5)  

etsysIetfBridgeDot1dStpTopChangeTrapEnable 1.3.6.1.4.1.5624.1.2.31.1.1.2
The enabled/disabled status of the Spanning Tree topology change notification. When this object is set to enabled(1) topology change notifications SHOULD be generated by the agent. When this object is set to disabled(2) topology change notifications MUST NOT be generated by the agent. When this object is set to edgePortDisabled(3) topology change notifications MUST NOT be generated by the agent for ports that are operating as edge ports, as specified by dot1dStpPortOperEdgePort, and SHOULD be generated for all other applicable ports.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), edgePortDisabled(3)  

etsysIetfBridgeDot1dStpNewRootTrapEnable 1.3.6.1.4.1.5624.1.2.31.1.1.3
The enabled/disabled status of the Spanning Tree new root notification. When this object is set to enabled(1) new root notifications SHOULD be generated by the agent. When this object is set to disabled(2) new root notifications MUST NOT be generated by the agent.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dStpBridgePriorityDefault 1.3.6.1.4.1.5624.1.2.31.1.1.4
The version of the Spanning Tree default Bridge Priority that is to be used by this Bridge. stp8021d1998(1) - indicates the use of Bridge Priority as defined in IEEE Std. 802.1D-1998. stp8021t2001(2) - indicates the use of Bridge Priority as defined in IEEE Std. 802.1t.
OBJECT-TYPE    
  INTEGER stp8021d1998(1), stp8021t2001(2)  

etsysIetfBridgeDot1dBase 1.3.6.1.4.1.5624.1.2.31.1.2
OBJECT IDENTIFIER    

etsysIetfBridgeDot1dBasePortTable 1.3.6.1.4.1.5624.1.2.31.1.2.1
A table of port based controls. Augments the dot1dBasePortTable.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIetfBridgeDot1dBasePortEntry

etsysIetfBridgeDot1dBasePortEntry 1.3.6.1.4.1.5624.1.2.31.1.2.1.1
The per port controls for an individual bridge port.
OBJECT-TYPE    
  EtsysIetfBridgeDot1dBasePortEntry  

etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.1
The status of the new learned address notification feature on this port. When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3) and a dot1qTpFdbPort value equal to this row's dot1dBasePort value. Setting this object to disabled will prevent the agent from generating etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for this port. If etsysIetfBridgeDot1qNewLearnedAddrTrapEnable is set to disabled, setting this object to enabled will have no effect. Notification generation is not required to match new address rate of learning. A best effort delivery queue is acceptable.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1qBase 1.3.6.1.4.1.5624.1.2.31.1.3
OBJECT IDENTIFIER    

etsysIetfBridgeDot1qNewLearnedAddrTrapEnable 1.3.6.1.4.1.5624.1.2.31.1.3.1
The global status of the new learned address notification feature. When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for each new address learned on ports that have their corresponding etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap object set to enabled(1). If etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap is set to disabled(2) for all ports then setting this object to enabled(1) will not have any effect. When this object is set to disabled(1), the agent will not generate any etsysIetfBridgeDot1qFdbNewLearnedAddr notifications.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dSpanGuard 1.3.6.1.4.1.5624.1.2.31.1.4
OBJECT IDENTIFIER    

etsysIetfBridgeDot1dStpSpanGuardEnable 1.3.6.1.4.1.5624.1.2.31.1.4.1
The enabled/disabled status of the SpanGuard functionality.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dStpSpanGuardTrapEnable 1.3.6.1.4.1.5624.1.2.31.1.4.2
The enabled/disabled status of the SpanGuard Port Blocking trap.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dStpSpanGuardBlockTime 1.3.6.1.4.1.5624.1.2.31.1.4.3
The number of seconds that a port will be held in the blocking state by the SpanGuard feature. The value zero indicates that ports will be held in the blocking state until the entity is reset. Ports that are being held in the blocking state can be returned to normal service by writing the value of false(2) to their resective etsysIetfBridgeDot1dBasePortSpanGuardBlocking objects.
OBJECT-TYPE    
  Integer32 0 | 1..65535  

etsysIetfBridgeDot1dBackupRoot 1.3.6.1.4.1.5624.1.2.31.1.5
OBJECT IDENTIFIER    

etsysIetfBridgeDot1dStpBackupRootEnable 1.3.6.1.4.1.5624.1.2.31.1.5.1
The enabled/disabled status of the Backup Root functionality on the Common and Internal Spanning Tree.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeDot1dStpBackupRootTrapEnable 1.3.6.1.4.1.5624.1.2.31.1.5.2
The enabled/disabled status of the Backup Root activation trap.
OBJECT-TYPE    
  EnabledStatus  

etsysIetfBridgeConformance 1.3.6.1.4.1.5624.1.2.31.2
OBJECT IDENTIFIER    

etsysIetfBridgeGroups 1.3.6.1.4.1.5624.1.2.31.2.1
OBJECT IDENTIFIER    

etsysIetfBridgeStpPort 1.3.6.1.4.1.5624.1.2.31.2.1.1
A collection of objects relating to per Port Spanning Tree information.
OBJECT-GROUP    

etsysIetfBridgeStpTrap 1.3.6.1.4.1.5624.1.2.31.2.1.2
A collection of objects relating to Spanning Tree SNMP Trap control.
OBJECT-GROUP    

etsysIetfBridgeBase 1.3.6.1.4.1.5624.1.2.31.2.1.3
A collection of objects relating to bridge configuration information.
OBJECT-GROUP    

etsysIetfBridgeDot1qFdbNewAddrNotification 1.3.6.1.4.1.5624.1.2.31.2.1.4
The New Learned Address Notification.
NOTIFICATION-GROUP    

etsysIetfBridgeDot1dStpBridgePriority 1.3.6.1.4.1.5624.1.2.31.2.1.5
An object for support of legacy bridge priorities.
OBJECT-GROUP    

etsysIetfBridgeSpanGuard 1.3.6.1.4.1.5624.1.2.31.2.1.6
A collection of objects relating to the SpanGuard feature.
OBJECT-GROUP    

etsysIetfBridgeSpanGuardNotification 1.3.6.1.4.1.5624.1.2.31.2.1.7
The SpanGuard Port Blocked Notification.
NOTIFICATION-GROUP    

etsysIetfBridgeBackupRoot 1.3.6.1.4.1.5624.1.2.31.2.1.8
A collection of objects relating to the BackupRoot feature.
OBJECT-GROUP    

etsysIetfBridgeBackupRootNotification 1.3.6.1.4.1.5624.1.2.31.2.1.9
The Backup Root Activation Notification.
NOTIFICATION-GROUP    

etsysIetfBridgePortCistRoleValue 1.3.6.1.4.1.5624.1.2.31.2.1.10
The role of the port with respect to the CIST.
OBJECT-GROUP    

etsysIetfBridgeCompliances 1.3.6.1.4.1.5624.1.2.31.2.2
OBJECT IDENTIFIER    

etsysIetfBridgeCompliance 1.3.6.1.4.1.5624.1.2.31.2.2.1
The compliance statement for devices that support the IETF BRIDGE-MIB Extension MIB.
MODULE-COMPLIANCE    

Defined Objects

EtsysIetfBridgeDot1dStpPortEntry  
SEQUENCE    
  EnabledStatus as etsysIetfBridgeDot1dStpPortStpEnable  
  TruthValue as etsysIetfBridgeDot1dStpPortSpanGuardBlocking  
  INTEGER as etsysIetfBridgeDot1dStpPortCistRoleValue  

EtsysIetfBridgeDot1dBasePortEntry  
SEQUENCE    
  EnabledStatus as etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap