EXTREME-VLAN-MIB

File: EXTREME-VLAN-MIB.mib (48816 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
EXTREME-BASE-MIB EXTREME-SYSTEM-MIB

Imported symbols

MODULE-IDENTITY RowStatus TruthValue
DisplayString OBJECT-TYPE IpAddress
extremeAgent PortList extremeSlotNumber
Counter64

Defined Objects

extremeVlan 1.3.6.1.4.1.1916.1.2
Extreme Virtual LAN objects
MODULE-IDENTITY    

extremeVlanGroup 1.3.6.1.4.1.1916.1.2.1
OBJECT IDENTIFIER    

extremeVlanGlobalMappingTable 1.3.6.1.4.1.1916.1.2.1.1
This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanGlobalMappingEntry

extremeVlanGlobalMappingEntry 1.3.6.1.4.1.1916.1.2.1.1.1
An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value.
OBJECT-TYPE    
  ExtremeVlanGlobalMappingEntry  

extremeVlanGlobalMappingIdentifier 1.3.6.1.4.1.1916.1.2.1.1.1.1
An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same.
OBJECT-TYPE    
  INTEGER 0..65535  

extremeVlanGlobalMappingIfIndex 1.3.6.1.4.1.1916.1.2.1.1.1.2
The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanIfTable 1.3.6.1.4.1.1916.1.2.1.2
This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanIfEntry

extremeVlanIfEntry 1.3.6.1.4.1.1916.1.2.1.2.1
An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
OBJECT-TYPE    
  ExtremeVlanIfEntry  

extremeVlanIfIndex 1.3.6.1.4.1.1916.1.2.1.2.1.1
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
OBJECT-TYPE    
  INTEGER  

extremeVlanIfDescr 1.3.6.1.4.1.1916.1.2.1.2.1.2
This is a description of the VLAN interface.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

extremeVlanIfType 1.3.6.1.4.1.1916.1.2.1.2.1.3
The VLAN interface type.
OBJECT-TYPE    
  ExtremeVlanType  

extremeVlanIfGlobalIdentifier 1.3.6.1.4.1.1916.1.2.1.2.1.4
An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned.
OBJECT-TYPE    
  INTEGER 0..65535  

extremeVlanIfStatus 1.3.6.1.4.1.1916.1.2.1.2.1.6
The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable. Setting this object to destroy(6) will remove the corresponding VLAN interface, remove the entry in this table, and the corresponding entries in the extremeVlanGlobalMappingTable and the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies.
OBJECT-TYPE    
  RowStatus  

extremeVlanIfIgnoreStpFlag 1.3.6.1.4.1.1916.1.2.1.2.1.7
Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses STP port information
OBJECT-TYPE    
  TruthValue  

extremeVlanIfIgnoreBpduFlag 1.3.6.1.4.1.1916.1.2.1.2.1.8
Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own network when external switches also fall within the same Spanning Tree Domain. When a vlan is first created, the Default value is FALSE.
OBJECT-TYPE    
  TruthValue  

extremeVlanIfLoopbackModeFlag 1.3.6.1.4.1.1916.1.2.1.2.1.9
Setting this object to true causes loopback mode to be enabled on this VLAN.
OBJECT-TYPE    
  TruthValue  

extremeVlanIfVlanId 1.3.6.1.4.1.1916.1.2.1.2.1.10
The VLAN ID of this VLAN.
OBJECT-TYPE    
  INTEGER  

extremeVirtualGroup 1.3.6.1.4.1.1916.1.2.2
OBJECT IDENTIFIER    

extremeNextAvailableVirtIfIndex 1.3.6.1.4.1.1916.1.2.2.1
The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an agent's table, that is indexed by ifIndex. Row creation using the current value of this object, allocates a virtual ifIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the virtual ifIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of virual ifIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device.
OBJECT-TYPE    
  INTEGER  

extremeEncapsulationGroup 1.3.6.1.4.1.1916.1.2.3
OBJECT IDENTIFIER    

extremeVlanEncapsIfTable 1.3.6.1.4.1.1916.1.2.3.1
This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanEncapsIfEntry

extremeVlanEncapsIfEntry 1.3.6.1.4.1.1916.1.2.3.1.1
An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
OBJECT-TYPE    
  ExtremeVlanEncapsIfEntry  

extremeVlanEncapsIfIndex 1.3.6.1.4.1.1916.1.2.3.1.1.1
The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object.
OBJECT-TYPE    
  INTEGER  

extremeVlanEncapsIfType 1.3.6.1.4.1.1916.1.2.3.1.1.2
The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
OBJECT-TYPE    
  ExtremeVlanEncapsType  

extremeVlanEncapsIfTag 1.3.6.1.4.1.1916.1.2.3.1.1.3
The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
OBJECT-TYPE    
  INTEGER  

extremeVlanEncapsIfStatus 1.3.6.1.4.1.1916.1.2.3.1.1.4
The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag to some valid and consistent values. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row, the agent will create the row and change the status to active(1). If any of the necessary objects are not available, or specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Setting this object to createAndWait(5) causes a row in in this table to be created. If all necessary objects in the row have been assigned values and specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding VLAN encapsulation interface, remove the entry in this table, and remove the corresponding entry in the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any references to this interface in the ifStackTable.
OBJECT-TYPE    
  RowStatus  

extremeVlanIpGroup 1.3.6.1.4.1.1916.1.2.4
OBJECT IDENTIFIER    

extremeVlanIpTable 1.3.6.1.4.1.1916.1.2.4.1
A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanIpEntry

extremeVlanIpEntry 1.3.6.1.4.1.1916.1.2.4.1.1
A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface.
OBJECT-TYPE    
  ExtremeVlanIpEntry  

extremeVlanIpNetAddress 1.3.6.1.4.1.1916.1.2.4.1.1.1
The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index.
OBJECT-TYPE    
  IpAddress  

extremeVlanIpNetMask 1.3.6.1.4.1.1916.1.2.4.1.1.2
The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress.
OBJECT-TYPE    
  IpAddress  

extremeVlanIpStatus 1.3.6.1.4.1.1916.1.2.4.1.1.3
The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to active(1) or createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request. Setting this object to createAndWait(5) is not supported. When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the extremeVlanIpIndex object. Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table.
OBJECT-TYPE    
  RowStatus  

extremeVlanIpForwardingState 1.3.6.1.4.1.1916.1.2.4.1.1.4
Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable.
OBJECT-TYPE    
  TruthValue  

extremeProtocolGroup 1.3.6.1.4.1.1916.1.2.5
OBJECT IDENTIFIER    

extremeVlanProtocolTable 1.3.6.1.4.1.1916.1.2.5.1
Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanProtocolEntry

extremeVlanProtocolEntry 1.3.6.1.4.1.1916.1.2.5.1.1
One member protocol ID of a protocol definition.
OBJECT-TYPE    
  ExtremeVlanProtocolEntry  

extremeVlanProtocolIndex 1.3.6.1.4.1.1916.1.2.5.1.1.1
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
OBJECT-TYPE    
  INTEGER 0..7  

extremeVlanProtocolIdIndex 1.3.6.1.4.1.1916.1.2.5.1.1.2
An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare).
OBJECT-TYPE    
  INTEGER 0..6  

extremeVlanProtocolName 1.3.6.1.4.1.1916.1.2.5.1.1.3
A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

extremeVlanProtocolDllEncapsType 1.3.6.1.4.1.1916.1.2.5.1.1.4
Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
OBJECT-TYPE    
  INTEGER any(1), ethertype(2), llc(3), llcSnapEthertype(4), none(5)  

extremeVlanProtocolId 1.3.6.1.4.1.1916.1.2.5.1.1.5
The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5).
OBJECT-TYPE    
  INTEGER 0..65535  

extremeVlanProtocolStatus 1.3.6.1.4.1.1916.1.2.5.1.1.6
The row status variable, used according to row installation and removal conventions.
OBJECT-TYPE    
  RowStatus  

extremeVlanProtocolVlanTable 1.3.6.1.4.1.1916.1.2.5.2
Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare).
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanProtocolVlanEntry

extremeVlanProtocolVlanEntry 1.3.6.1.4.1.1916.1.2.5.2.1
A mapping of untagged packets of one protocol onto a particular VLAN.
OBJECT-TYPE    
  ExtremeVlanProtocolVlanEntry  

extremeVlanProtocolVlanIfIndex 1.3.6.1.4.1.1916.1.2.5.2.1.1
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
OBJECT-TYPE    
  INTEGER  

extremeVlanProtocolVlanProtocolIndex 1.3.6.1.4.1.1916.1.2.5.2.1.2
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
OBJECT-TYPE    
  INTEGER  

extremeVlanProtocolVlanStatus 1.3.6.1.4.1.1916.1.2.5.2.1.3
The row status variable, used according to row installation and removal conventions.
OBJECT-TYPE    
  RowStatus  

extremeVlanOpaqueGroup 1.3.6.1.4.1.1916.1.2.6
OBJECT IDENTIFIER    

extremeVlanOpaqueTable 1.3.6.1.4.1.1916.1.2.6.1
This table lists the ports associated with each VLAN interface.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanOpaqueEntry

extremeVlanOpaqueEntry 1.3.6.1.4.1.1916.1.2.6.1.1
This represents the tagged and untagged ports on each slot per vlan.
OBJECT-TYPE    
  ExtremeVlanOpaqueEntry  

extremeVlanOpaqueTaggedPorts 1.3.6.1.4.1.1916.1.2.6.1.1.1
Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise.
OBJECT-TYPE    
  PortList  

extremeVlanOpaqueUntaggedPorts 1.3.6.1.4.1.1916.1.2.6.1.1.2
Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise.
OBJECT-TYPE    
  PortList  

extremeVlanStackGroup 1.3.6.1.4.1.1916.1.2.7
OBJECT IDENTIFIER    

extremeVlanStackTable 1.3.6.1.4.1.1916.1.2.7.1
Represents those components of the ifStackTable that do not contain a Physical interface.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanStackEntry

extremeVlanStackEntry 1.3.6.1.4.1.1916.1.2.7.1.1
Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here.
OBJECT-TYPE    
  ExtremeVlanStackEntry  

extremeVlanStackHigherLayer 1.3.6.1.4.1.1916.1.2.7.1.1.1
The higher layer in the logical vlan hierarchy.
OBJECT-TYPE    
  INTEGER  

extremeVlanStackLowerLayer 1.3.6.1.4.1.1916.1.2.7.1.1.2
The lower layer in the logical vlan hierarchy.
OBJECT-TYPE    
  INTEGER  

extremeVlanStatsGroup 1.3.6.1.4.1.1916.1.2.8
OBJECT IDENTIFIER    

extremeVlanL2StatsTable 1.3.6.1.4.1.1916.1.2.8.1
This tables contains per-VLAN layer 2 statistics information.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanL2StatsEntry

extremeVlanL2StatsEntry 1.3.6.1.4.1.1916.1.2.8.1.1
OBJECT-TYPE    
  ExtremeVlanL2StatsEntry  

extremeVlanL2StatsIfDescr 1.3.6.1.4.1.1916.1.2.8.1.1.1
This is a description(name) of the VLAN.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

extremeVlanL2StatsPktsToCpu 1.3.6.1.4.1.1916.1.2.8.1.1.2
The total number of packets of this VLAN sent to the CPU.
OBJECT-TYPE    
  Counter64  

extremeVlanL2StatsPktsLearnt 1.3.6.1.4.1.1916.1.2.8.1.1.3
The total number of packets learnt on this VLAN.
OBJECT-TYPE    
  Counter64  

extremeVlanL2StatsIgmpCtrlPktsSnooped 1.3.6.1.4.1.1916.1.2.8.1.1.4
The total number of IGMP control packets snooped on this VLAN.
OBJECT-TYPE    
  Counter64  

extremeVlanL2StatsIgmpDataPktsSwitched 1.3.6.1.4.1.1916.1.2.8.1.1.5
The total number of IGMP data packets switched on this VLAN.
OBJECT-TYPE    
  Counter64  

extremeVlanAggregationGroup 1.3.6.1.4.1.1916.1.2.9
OBJECT IDENTIFIER    

extremeVlanAggregationTable 1.3.6.1.4.1.1916.1.2.9.1
This table contains the VLAN aggregation information.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanAggregationEntry

extremeVlanAggregationEntry 1.3.6.1.4.1.1916.1.2.9.1.1
Information about the individual VLAN aggregation entry.
OBJECT-TYPE    
  ExtremeVlanAggregationEntry  

extremeVlanAggregationSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.1.1.1
The Super Vlan index for this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanAggregationSubVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.1.1.2
The Sub Vlan index for this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanAggregationSubVlanStartIpNetAddress 1.3.6.1.4.1.1916.1.2.9.1.1.3
This represents the start network address of the IP range.
OBJECT-TYPE    
  IpAddress  

extremeVlanAggregationSubVlanStartIpNetMask 1.3.6.1.4.1.1916.1.2.9.1.1.4
This represents the start network address mask of the IP range
OBJECT-TYPE    
  IpAddress  

extremeVlanAggregationSubVlanEndIpNetAddress 1.3.6.1.4.1.1916.1.2.9.1.1.5
This represents the end network address of the IP range.
OBJECT-TYPE    
  IpAddress  

extremeVlanAggregationSubVlanEndIpNetMask 1.3.6.1.4.1.1916.1.2.9.1.1.6
This represents the end network address mask of the IP range.
OBJECT-TYPE    
  IpAddress  

extremeVlanAggregationStatus 1.3.6.1.4.1.1916.1.2.9.1.1.7
The status of this entry.
OBJECT-TYPE    
  RowStatus  

extremeVlanAggregationConfigTable 1.3.6.1.4.1.1916.1.2.9.2
This table contains the sub VLAN proxy setting information.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanAggregationConfigEntry

extremeVlanAggregationConfigEntry 1.3.6.1.4.1.1916.1.2.9.2.1
Information about the individual VLAN aggregation entry.
OBJECT-TYPE    
  ExtremeVlanAggregationConfigEntry  

extremeVlanAggregationConfigSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.2.1.1
The Super Vlan index for this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanAggregationConfigSubVlanProxyEnable 1.3.6.1.4.1.1916.1.2.9.2.1.2
The boolean flag that prevents normal communication between sub vlans.
OBJECT-TYPE    
  TruthValue  

extremeVlanTranslationGroup 1.3.6.1.4.1.1916.1.2.10
OBJECT IDENTIFIER    

extremeVlanTranslationTable 1.3.6.1.4.1.1916.1.2.10.1
This table contains the VLAN translation information.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeVlanTranslationEntry

extremeVlanTranslationEntry 1.3.6.1.4.1.1916.1.2.10.1.1
Information about the individual VLAN translation entry.
OBJECT-TYPE    
  ExtremeVlanTranslationEntry  

extremeVlanTranslationSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.10.1.1.1
The Super Vlan index for this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanTranslationMemberVlanIfIndex 1.3.6.1.4.1.1916.1.2.10.1.1.2
The member Vlan index for this entry.
OBJECT-TYPE    
  INTEGER  

extremeVlanTranslationStatus 1.3.6.1.4.1.1916.1.2.10.1.1.3
The status of this entry.
OBJECT-TYPE    
  RowStatus  

Defined Objects

ExtremeVlanType  
INTEGER vlanLayer2(1)    

ExtremeVlanGlobalMappingEntry  
SEQUENCE    
  INTEGER as extremeVlanGlobalMappingIdentifier 0..65535  
  INTEGER as extremeVlanGlobalMappingIfIndex  

ExtremeVlanIfEntry  
SEQUENCE    
  INTEGER as extremeVlanIfIndex  
  DisplayString as extremeVlanIfDescr  
  ExtremeVlanType as extremeVlanIfType  
  INTEGER as extremeVlanIfGlobalIdentifier  
  RowStatus as extremeVlanIfStatus  
  TruthValue as extremeVlanIfIgnoreStpFlag  
  TruthValue as extremeVlanIfIgnoreBpduFlag  
  TruthValue as extremeVlanIfLoopbackModeFlag  
  INTEGER as extremeVlanIfVlanId  

ExtremeVlanEncapsType  
INTEGER vlanEncaps8021q(1)    

ExtremeVlanEncapsIfEntry  
SEQUENCE    
  INTEGER as extremeVlanEncapsIfIndex  
  ExtremeVlanEncapsType as extremeVlanEncapsIfType  
  INTEGER as extremeVlanEncapsIfTag  
  RowStatus as extremeVlanEncapsIfStatus  

ExtremeVlanIpEntry  
SEQUENCE    
  IpAddress as extremeVlanIpNetAddress  
  IpAddress as extremeVlanIpNetMask  
  RowStatus as extremeVlanIpStatus  
  TruthValue as extremeVlanIpForwardingState  

ExtremeVlanProtocolEntry  
SEQUENCE    
  INTEGER as extremeVlanProtocolIndex  
  INTEGER as extremeVlanProtocolIdIndex  
  DisplayString as extremeVlanProtocolName  
  INTEGER as extremeVlanProtocolDllEncapsType  
  INTEGER as extremeVlanProtocolId  
  RowStatus as extremeVlanProtocolStatus  

ExtremeVlanProtocolVlanEntry  
SEQUENCE    
  INTEGER as extremeVlanProtocolVlanIfIndex  
  INTEGER as extremeVlanProtocolVlanProtocolIndex  
  RowStatus as extremeVlanProtocolVlanStatus  

ExtremeVlanOpaqueEntry  
SEQUENCE    
  PortList as extremeVlanOpaqueTaggedPorts  
  PortList as extremeVlanOpaqueUntaggedPorts  

ExtremeVlanStackEntry  
SEQUENCE    
  INTEGER as extremeVlanStackHigherLayer  
  INTEGER as extremeVlanStackLowerLayer  

ExtremeVlanL2StatsEntry  
SEQUENCE    
  DisplayString as extremeVlanL2StatsIfDescr  
  Counter64 as extremeVlanL2StatsPktsToCpu  
  Counter64 as extremeVlanL2StatsPktsLearnt  
  Counter64 as extremeVlanL2StatsIgmpCtrlPktsSnooped  
  Counter64 as extremeVlanL2StatsIgmpDataPktsSwitched  

ExtremeVlanAggregationEntry  
SEQUENCE    
  INTEGER as extremeVlanAggregationSuperVlanIfIndex  
  INTEGER as extremeVlanAggregationSubVlanIfIndex  
  IpAddress as extremeVlanAggregationSubVlanStartIpNetAddress  
  IpAddress as extremeVlanAggregationSubVlanStartIpNetMask  
  IpAddress as extremeVlanAggregationSubVlanEndIpNetAddress  
  IpAddress as extremeVlanAggregationSubVlanEndIpNetMask  
  RowStatus as extremeVlanAggregationStatus  

ExtremeVlanAggregationConfigEntry  
SEQUENCE    
  INTEGER as extremeVlanAggregationConfigSuperVlanIfIndex  
  TruthValue as extremeVlanAggregationConfigSubVlanProxyEnable  

ExtremeVlanTranslationEntry  
SEQUENCE    
  INTEGER as extremeVlanTranslationSuperVlanIfIndex  
  INTEGER as extremeVlanTranslationMemberVlanIfIndex  
  RowStatus as extremeVlanTranslationStatus