Finisher-MIB

File: Finisher-MIB.mib (42551 bytes)

Imported modules

RFC1213-MIB SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF HOST-RESOURCES-MIB Printer-MIB

Imported symbols

mib-2 MODULE-IDENTITY OBJECT-TYPE
Integer32 experimental TEXTUAL-CONVENTION
MODULE-COMPLIANCE OBJECT-GROUP hrDeviceIndex
printmib PrtMarkerSuppliesTypeTC PrtSubUnitStatusTC
PrtInputTypeTC PrtMarkerSuppliesSupplyUnitTC PrtMediaUnitTC
PrtCapacityUnitTC PrtMarkerSuppliesClassTC PresentOnOff
prtMIBConformance

Defined Objects

finMIBCompliance 1.3.6.1.2.1.43.2.3
The compliance statement for agents that implement the finisher MIB.
MODULE-COMPLIANCE    

finMIBGroups 1.3.6.1.2.1.43.2.4
OBJECT IDENTIFIER    

finDeviceGroup 1.3.6.1.2.1.43.2.4.1
The finisher device group.
OBJECT-GROUP    

finSupplyGroup 1.3.6.1.2.1.43.2.4.2
The finisher supply group.
OBJECT-GROUP    

finSupplyMediaInputGroup 1.3.6.1.2.1.43.2.4.3
The finisher supply, media input group.
OBJECT-GROUP    

finDeviceAttributeGroup 1.3.6.1.2.1.43.2.4.4
The finisher device attribute group.
OBJECT-GROUP    

finDevice 1.3.6.1.2.1.43.30
OBJECT IDENTIFIER    

finDeviceTable 1.3.6.1.2.1.43.30.1
This table defines the finishing device subunits, including information regarding possible configuration options and the status for each finisher device subunit.
OBJECT-TYPE    
  SEQUENCE OF  
    FinDeviceEntry

finDeviceEntry 1.3.6.1.2.1.43.30.1.1
There is an entry in the finishing device table for each possible finisher process.
OBJECT-TYPE    
  FinDeviceEntry  

finDeviceIndex 1.3.6.1.2.1.43.30.1.1.1
A unique value used to identify a finisher process. Although these values may change due to a major reconfiguration of the printer system (e.g. the addition of new finishing processes), the values are normally expected to remain stable across successive power cycles.
OBJECT-TYPE    
  Integer32 1..65535  

finDeviceType 1.3.6.1.2.1.43.30.1.1.2
Defines the type of finishing process associated with this table row entry.
OBJECT-TYPE    
  FinDeviceTypeTC  

finDevicePresentOnOff 1.3.6.1.2.1.43.30.1.1.3
Indicates if this finishing device subunit is available and whether the device subunit is enabled.
OBJECT-TYPE    
  PresentOnOff  

finDeviceCapacityUnit 1.3.6.1.2.1.43.30.1.1.4
The unit of measure for specifying the capacity of this finisher device subunit.
OBJECT-TYPE    
  PrtCapacityUnitTC  

finDeviceMaxCapacity 1.3.6.1.2.1.43.30.1.1.5
The maximum capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher device and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finDeviceCurrentCapacity 1.3.6.1.2.1.43.30.1.1.6
The current capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finDeviceAssociatedMediaPaths 1.3.6.1.2.1.43.30.1.1.7
Indicates the media paths which can supply media for this finisher device. The value of this object is a bit map in an octet string with each position representing the value of a prtMediaPathIndex. For a media path that can be a source for this finisher device subunit, the bit position equal to one less than the value of prtMediaPathIndex will be set. The bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant of the second byte being bit 8, and so on.
OBJECT-TYPE    
  OCTET STRING  

finDeviceAssociatedOutputs 1.3.6.1.2.1.43.30.1.1.8
Indicates the printer output subunits this finisher device subunit services. The value of this object is a bit map in an octet string with each position representing the value of a prtOutputIndex. For an output subunit that is serviced by this finisher device subunit, the bit position equal to to one less than the value of prtOutputIndex will be set. The bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant of the second byte being bit 8, and so on.
OBJECT-TYPE    
  OCTET STRING  

finDeviceStatus 1.3.6.1.2.1.43.30.1.1.9
Indicates the current status of this finisher device subunit.
OBJECT-TYPE    
  PrtSubUnitStatusTC  

finDeviceDescription 1.3.6.1.2.1.43.30.1.1.10
A free form text description of this device subunit in the localization specified by prtGeneralCurrentLocalization.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

finSupply 1.3.6.1.2.1.43.31
OBJECT IDENTIFIER    

finSupplyTable 1.3.6.1.2.1.43.31.1
Each unique source of supply is an entry in the finisher supply table. Each supply entry has its own characteristics associated with it such as colorant and current supply level.
OBJECT-TYPE    
  SEQUENCE OF  
    FinSupplyEntry

finSupplyEntry 1.3.6.1.2.1.43.31.1.1
A list of finisher devices, with their associated supplies and supplies characteristics.
OBJECT-TYPE    
  FinSupplyEntry  

finSupplyIndex 1.3.6.1.2.1.43.31.1.1.1
A unique value used by a finisher to identify this supply container/receptacle. Although these values may change due to a major reconfiguration of the finisher (e.g. the addition of new supply sources to the finisher), values are normally expected to remain stable across successive power cycles.
OBJECT-TYPE    
  Integer32 1..65535  

finSupplyDeviceIndex 1.3.6.1.2.1.43.31.1.1.2
The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher supply is associated.
OBJECT-TYPE    
  Integer32 0..65535  

finSupplyClass 1.3.6.1.2.1.43.31.1.1.3
This value indicates whether this supply entity represents a supply that is consumed or a container that is filled.
OBJECT-TYPE    
  PrtMarkerSuppliesClassTC  

finSupplyType 1.3.6.1.2.1.43.31.1.1.4
The type of this supply.
OBJECT-TYPE    
  PrtMarkerSuppliesTypeTC  

finSupplyDescription 1.3.6.1.2.1.43.31.1.1.5
The description of this supply/receptacle in text useful for operators and management applications and in the localization specified by prtGeneralCurrentLocalization.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

finSupplyUnit 1.3.6.1.2.1.43.31.1.1.6
Unit of measure of this finisher supply container or receptacle.
OBJECT-TYPE    
  PrtMarkerSuppliesSupplyUnitTC  

finSupplyMaxCapacity 1.3.6.1.2.1.43.31.1.1.7
The maximum capacity of this supply container/receptacle expressed in Supply Units. If this supply container/ receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finSupplyCurrentLevel 1.3.6.1.2.1.43.31.1.1.8
The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown. A value of (-3) means that the printer knows there is some supply or remaining space.
OBJECT-TYPE    
  Integer32  

finSupplyColorName 1.3.6.1.2.1.43.31.1.1.9
The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: other, unknown, white, red, green, blue, cyan, magenta, yellow and black. Implementors may add additional string values. The naming conventions in ISO 9070 are recommended in order to avoid potential name clashes.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

finSupplyMediaInput 1.3.6.1.2.1.43.32
OBJECT IDENTIFIER    

finSupplyMediaInputTable 1.3.6.1.2.1.43.32.1
The input subunits associated with a finisher supply media are each represented by an entry in this table.
OBJECT-TYPE    
  SEQUENCE OF  
    FinSupplyMediaInputEntry

finSupplyMediaInputEntry 1.3.6.1.2.1.43.32.1.1
A list of finisher supply media input subunit features and characteristics.
OBJECT-TYPE    
  FinSupplyMediaInputEntry  

finSupplyMediaInputIndex 1.3.6.1.2.1.43.32.1.1.1
A unique value used by a finisher to identify this supply media input subunit. Although these values may change due to a major reconfiguration of the finisher (e.g. the addition of new supply media input sources to the finisher), values are normally expected to remain stable across successive power cycles.
OBJECT-TYPE    
  Integer32 1..65535  

finSupplyMediaInputDeviceIndex 1.3.6.1.2.1.43.32.1.1.2
The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher media supply is associated.
OBJECT-TYPE    
  Integer32 0..65535  

finSupplyMediaInputSupplyIndex 1.3.6.1.2.1.43.32.1.1.3
The value of finSupplyIndex corresponding to the finishing supply subunit with which this finisher media supply is associated.
OBJECT-TYPE    
  Integer32 0..65535  

finSupplyMediaInputType 1.3.6.1.2.1.43.32.1.1.4
The type of technology (discriminated primarily according to the feeder mechanism type) employed by the input subunit.
OBJECT-TYPE    
  PrtInputTypeTC  

finSupplyMediaInputDimUnit 1.3.6.1.2.1.43.32.1.1.5
The unit of measure for specifying dimensional values for this input device.
OBJECT-TYPE    
  PrtMediaUnitTC  

finSupplyMediaInputMediaDimFeedDir 1.3.6.1.2.1.43.32.1.1.6
This object provides the value of the dimension in the feed direction of the media that is placed or will be placed in this input device. Feed dimension measurements are taken parallel to the feed direction of the device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finSupplyMediaInputMediaDimXFeedDir 1.3.6.1.2.1.43.32.1.1.7
This object provides the value of the dimension across the feed direction of the media that is placed or will be placed in this input device. The cross feed direction is ninety degrees relative to the feed direction on this device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finSupplyMediaInputStatus 1.3.6.1.2.1.43.32.1.1.8
This value indicates the current status of this input device.
OBJECT-TYPE    
  PrtSubUnitStatusTC  

finSupplyMediaInputMediaName 1.3.6.1.2.1.43.32.1.1.9
The name of the current media contained in this input device. Examples are Engineering Manual Cover, Section A Tab Divider or any ISO standard names.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

finSupplyMediaInputName 1.3.6.1.2.1.43.32.1.1.10
The name assigned to this input subunit.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

finSupplyMediaInputDescription 1.3.6.1.2.1.43.32.1.1.11
A free form text description of this input subunit in the localization specified by prtGeneralCurrentLocalization.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

finSupplyMediaInputSecurity 1.3.6.1.2.1.43.32.1.1.12
Indicates if this subunit has some security associated with it.
OBJECT-TYPE    
  PresentOnOff  

finSupplyMediaInputMediaWeight 1.3.6.1.2.1.43.32.1.1.13
The weight of the media associated with this Input device in grams per meter squared. The value (-1) means other and specifically indicates that the device places no restriction on this parameter. The value (-2) means unknown. This object can be used to calculate the weight of individual pages processed by the document finisher. This value, when multiplied by the number of pages in a finished set, can be used to calculate the weight of a set before it is inserted into a mailing envelope.
OBJECT-TYPE    
  Integer32  

finSupplyMediaInputMediaThickness 1.3.6.1.2.1.43.32.1.1.14
This object identifies the thickness of the input media processed by this document input subunit measured in micrometers. This value may be used by devices (or operators) to set up proper machine tolerances for the feeder operation. The value (-2) indicates that the media thickness is unknown or not used in the setup for this input subunit.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finSupplyMediaInputMediaType 1.3.6.1.2.1.43.32.1.1.15
The name of the type of medium associated with this input subunit. Valid values are standardized strings from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: stationary, transparency, envelope, envelope-plain, envelope window, continuous-long, continuous-short, tab-stock, labels, multi-layer.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

finDeviceAttribute 1.3.6.1.2.1.43.33
OBJECT IDENTIFIER    

finDeviceAttributeTable 1.3.6.1.2.1.43.33.1
The attribute table defines special parameters that are applicable only to a minority of the finisher devices. An attribute table entry is used, rather than unique objects, to minimize the number of MIB objects and to allow for expansion without the addition of MIB objects. Each finisher device is represented by a separate row in the device subunit attribute table.
OBJECT-TYPE    
  SEQUENCE OF  
    FinDeviceAttributeEntry

finDeviceAttributeEntry 1.3.6.1.2.1.43.33.1.1
Each entry defines a finisher function parameter that cannot be represented by an object in the finisher device subunit table.
OBJECT-TYPE    
  FinDeviceAttributeEntry  

finDeviceAttributeTypeIndex 1.3.6.1.2.1.43.33.1.1.1
Defines the attribute type represented by this row.
OBJECT-TYPE    
  FinAttributeTypeTC  

finDeviceAttributeInstanceIndex 1.3.6.1.2.1.43.33.1.1.2
An index that allows the discrimination of an attribute instance when the same attribute occurs multiple times for a specific instance of a finisher function. The value of this index shall be 1 if only a single instance of the attribute occurs for the specific finisher function.
OBJECT-TYPE    
  Integer32 1..65535  

finDeviceAttributeValueAsInteger 1.3.6.1.2.1.43.33.1.1.3
Defines the integer value of the attribute. The value of the attribute is represented as an integer if the finAttributeTypeTC description for the attribute has the tag 'INTEGER:'. Depending upon the attribute enum definition, this object may be either an integer, a counter, an index, or an enum. Attributes for which the concept of an integer value is not meaningful SHALL return a value of -1 for this attribute.
OBJECT-TYPE    
  Integer32 -2..2147483647  

finDeviceAttributeValueAsOctets 1.3.6.1.2.1.43.33.1.1.4
Contains the octet string value of the attribute. The value of the attribute is represented as a string if the finAttributeTypeTC description for the attribute has the tag 'OCTETS:'. Depending upon the attribute enum definition, this object may be either a coded character set string (text) or a binary octet string. Attributes for which the concept of an octet string value is not meaningful SHALL contain a zero length string.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

finisherMIB 1.3.6.1.3.64
The MIB module for management of printer finisher units. The Finisher MIB is an extension of the Printer MIB.
MODULE-IDENTITY    

Defined Objects

FinDeviceTypeTC  
The defined finishing device subunit process enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), stitcher(3), folder(4), binder(5), trimmer(6), dieCutter(7), puncher(8), perforater(9), slitter(10), separationCutter(11), imprinter(12), wrapper(13), bander(14), makeEnvelope(15), stacker(16), sheetRotator(17)  

FinAttributeTypeTC  
This textual convention defines the set of enums for use in the finDeviceAttributeTable. See section 5.7 for the complete specification of each attribute.
TEXTUAL-CONVENTION    
  INTEGER other(1), deviceName(3), deviceVendorName(4), deviceModel(5), deviceVersion(6), deviceSerialNumber(7), maximumSheets(8), finProcessOffsetUnits(9), finReferenceEdge(10), finAxisOffset(11), finJogEdge(12), finHeadLocation(13), finOperationRestrictions(14), finNumberOfPositions(15), namedConfiguration(16), finMediaTypeRestriction(17), finPrinterInputTraySupported(18), finPreviousFinishingOperation(19), finNextFinishingOperation(20), stitchingType(30), stitchingDirection(31), foldingType(40), bindingType(50), punchHoleType(80), punchHoleSizeLongDim(81), punchHoleSizeShortDim(82), punchPattern(83), slittingType(100), wrappingType(130), stackOutputType(160), stackOffset(161), stackRotation(162)  

FinEdgeTC  
Specifies an edge for a Finishing Process.
TEXTUAL-CONVENTION    
  INTEGER topEdge(3), bottomEdge(4), leftEdge(5), rightEdge(6)  

FinStitchingTypeTC  
The defined stitching type enumerations. For the edgeStitch and stapleDual enums, the finReferenceEdge attribute is recommended to define the edge to which the operation applies.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), stapleTopLeft(4), stapleBottomLeft(5), stapleTopRight(6), stapleBottomRight(7), saddleStitch(8), edgeStitch(9), stapleDual(10)  

StitchingDirTypeTC  
Defines the direction, relative to the top sheet in the output subunit, that the stitching operation was performed. For a topDown(3) process, the staple will be clinched on the bottom of the stack. This parameter can be used to determine what order the pages of a booklet are to be printed such that the staple clinch will be on the inside of the resulting booklet.
TEXTUAL-CONVENTION    
  INTEGER unknown(2), topDown(3), bottomUp(4)  

StitchingAngleTypeTC  
This enumeration provides a description of the angular orientation of each stitch in a single or multiple stitching operation, relative to the 'X' axis. As with all finishing operations, the 'X' axis is always relative to the portrait orientation of the document regardless of the orientation of the printed image. This enum is primarily applicable to corner stitching operations.
TEXTUAL-CONVENTION    
  INTEGER unknown(2), horizontal(3), vertical(4), slanted(5)  

FinFoldingTypeTC  
The defined folding device process enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), zFold(3), halfFold(4), letterFold(5)  

FinBindingTypeTC  
The defined binding type enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), tape(4), plastic(5), velo(6), perfect(7), spiral(8), adhesive(9), comb(10), padding(11)  

FinPunchHoleTypeTC  
The defined hole type punch process enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), round(3), oblong(4), square(5), rectangular(6), star(7)  

FinPunchPatternTC  
The defined hole pattern punch process enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), twoHoleUSTop(4), threeHoleUS(5), twoHoleDIN(6), fourHoleDIN(7), twentyTwoHoleUS(8), nineteenHoleUS(9), twoHoleMetric(10), swedish4Hole(11), twoHoleUSSide(12), fiveHoleUS(13), sevenHoleUS(14), mixed7H4S(15), norweg6Hole(16), metric26Hole(17), metric30Hole(18)  

FinSlittingTypeTC  
The defined slitting type enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), slitAndSeparate(4), slitAndMerge(5)  

FinWrappingTypeTC  
The defined wrapping device process enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), shrinkWrap(4), paperWrap(5)  

FinStackOutputTypeTC  
The defined stack output type enumerations.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), straight(4), offset(5), crissCross(6)  

FinDeviceEntry  
SEQUENCE    
  Integer32 as finDeviceIndex  
  FinDeviceTypeTC as finDeviceType  
  PresentOnOff as finDevicePresentOnOff  
  PrtCapacityUnitTC as finDeviceCapacityUnit  
  Integer32 as finDeviceMaxCapacity  
  Integer32 as finDeviceCurrentCapacity  
  OCTET STRING as finDeviceAssociatedMediaPaths  
  OCTET STRING as finDeviceAssociatedOutputs  
  PrtSubUnitStatusTC as finDeviceStatus  
  OCTET STRING as finDeviceDescription  

FinSupplyEntry  
SEQUENCE    
  Integer32 as finSupplyIndex  
  Integer32 as finSupplyDeviceIndex  
  PrtMarkerSuppliesClassTC as finSupplyClass  
  PrtMarkerSuppliesTypeTC as finSupplyType  
  OCTET STRING as finSupplyDescription  
  PrtMarkerSuppliesSupplyUnitTC as finSupplyUnit  
  Integer32 as finSupplyMaxCapacity  
  Integer32 as finSupplyCurrentLevel  
  OCTET STRING as finSupplyColorName  

FinSupplyMediaInputEntry  
SEQUENCE    
  Integer32 as finSupplyMediaInputIndex  
  Integer32 as finSupplyMediaInputDeviceIndex  
  Integer32 as finSupplyMediaInputSupplyIndex  
  PrtInputTypeTC as finSupplyMediaInputType  
  PrtMediaUnitTC as finSupplyMediaInputDimUnit  
  Integer32 as finSupplyMediaInputMediaDimFeedDir  
  Integer32 as finSupplyMediaInputMediaDimXFeedDir  
  PrtSubUnitStatusTC as finSupplyMediaInputStatus  
  OCTET STRING as finSupplyMediaInputMediaName  
  OCTET STRING as finSupplyMediaInputName  
  OCTET STRING as finSupplyMediaInputDescription  
  PresentOnOff as finSupplyMediaInputSecurity  
  Integer32 as finSupplyMediaInputMediaWeight  
  Integer32 as finSupplyMediaInputMediaThickness  
  OCTET STRING as finSupplyMediaInputMediaType  

FinDeviceAttributeEntry  
SEQUENCE    
  FinAttributeTypeTC as finDeviceAttributeTypeIndex  
  Integer32 as finDeviceAttributeInstanceIndex  
  Integer32 as finDeviceAttributeValueAsInteger  
  OCTET STRING as finDeviceAttributeValueAsOctets