HP-ICF-OSPF

File: HP-ICF-OSPF.mib (14450 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
OSPF-MIB IANA-RTPROTO-MIB HP-ICF-OID

Imported symbols

Integer32 OBJECT-TYPE MODULE-IDENTITY
IpAddress TruthValue RowStatus
MODULE-COMPLIANCE OBJECT-GROUP BigMetric
IANAipRouteProtocol hpSwitch hp

Defined Objects

hpicfOspf 1.3.6.1.4.1.11.2.14.11.5.1.14
This MIB module contains HP proprietary extensions to the OSPF-MIB module.
MODULE-IDENTITY    

hpicfOspfObjects 1.3.6.1.4.1.11.2.14.11.5.1.14.1
OBJECT IDENTIFIER    

hpicfOspfGeneral 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1
OBJECT IDENTIFIER    

hpicfOspf1583CompatibilityMode 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.1
Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'true', the preference rules remain those specified in RFC 1583. When set to 'false', the preference rules are those stated in RFC 2328, which prevent routing loops when AS-external-LSAs for the same destination have been originated from different areas. Set to 'true' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have this object set identically. When there are fouters present that have not been updated with the functionality specified in RFC 2328, all routers should have this object set to 'true'. Otherwise, all routers should have this object set to 'false', preventing all routing loops.
OBJECT-TYPE    
  TruthValue  

hpicfOspfDefaultImportMetric 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.2
The default metric used for advertising external routes imported into OSPF by this router.
OBJECT-TYPE    
  BigMetric  

hpicfOspfDefaultImportMetricType 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.3
The default metric type used for advertising external routes imported into OSPF by this router.
OBJECT-TYPE    
  INTEGER externalType1(1), externalType2(2)  

hpicfOspfIntraAreaDistance 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.4
The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfInterAreaDistance or hpicfOspfExternalDistance is lower than hpicfOspfIntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfInterAreaDistance 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.5
The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfInterAreaDistance is lower than hpicfOspfIntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfExternalDistance 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.6
The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than the hpicfOspfIntraAreaDistance or hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfRedistTable 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2
Table for configuring route redistribution into OSPF.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfRedistEntry

hpicfOspfRedistEntry 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1
An entry in the table for configuring route redistribution into OSPF from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol.
OBJECT-TYPE    
  HpicfOspfRedistEntry  

hpicfOspfRedistSrcProto 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.1
Source protocol to redistribute routes from.
OBJECT-TYPE    
  IANAipRouteProtocol  

hpicfOspfRedistEnabled 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.2
A flag indicating whether OSPF should redistribute routes from this source protocol.
OBJECT-TYPE    
  TruthValue  

hpicfOspfRedistRestrictTable 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3
A table of route prefixes for filtering out routes that OSPF should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfOspfRedistRestrictMask and where the route destination ANDed with the hpicfOspfRedistRestrictMask is equal to hpicfOspfRedistRestrictAddr) will not be redistributed as an AS-external LSA by OSPF.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfRedistRestrictEntry

hpicfOspfRedistRestrictEntry 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1
A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into OSPF. Entries in this table are created dynamically using the hpicfOspfRedistRestrictStatus object.
OBJECT-TYPE    
  HpicfOspfRedistRestrictEntry  

hpicfOspfRedistRestrictAddr 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.1
The IP address of the range of route entries to exclude from redistribution into OSPF.
OBJECT-TYPE    
  IpAddress  

hpicfOspfRedistRestrictMask 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.2
The mask for the range of route entries to exclude from redistribution into OSPF.
OBJECT-TYPE    
  IpAddress  

hpicfOspfRedistRestrictStatus 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.3
The status of this entry.
OBJECT-TYPE    
  RowStatus  

hpicfOspfConformance 1.3.6.1.4.1.11.2.14.11.5.1.14.2
OBJECT IDENTIFIER    

hpicfOspfGroups 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1
OBJECT IDENTIFIER    

hpicfOspfBaseGroup 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.1
Basic OSPF configuration information that is not in the standard OSPF MIB.
OBJECT-GROUP    

hpicfOspfRedistGroup 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.2
A collection of objects for controlling the redistribution of external routes by OSPF.
OBJECT-GROUP    

hpicfOspfDistanceGroup 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.3
A collection of objects for configuring the administrative distance of routes learned by OSPF.
OBJECT-GROUP    

hpicfOspfCompliances 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2
OBJECT IDENTIFIER    

hpicfOspfCompliance 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.1
The compliance statement for HP Routing Switches that support OSPF.
MODULE-COMPLIANCE    

hpicfOspfRouteGroup 1.3.6.1.4.1.11.2.14.11.5.1.14.3
OBJECT IDENTIFIER    

hpicfOspfNssaType1 1.3.6.1.4.1.11.2.14.11.5.1.14.3.1
OBJECT IDENTIFIER    

hpicfOspfNssaType2 1.3.6.1.4.1.11.2.14.11.5.1.14.3.2
OBJECT IDENTIFIER    

Defined Objects

HpicfOspfRedistEntry  
SEQUENCE    
  IANAipRouteProtocol as hpicfOspfRedistSrcProto  
  TruthValue as hpicfOspfRedistEnabled  

HpicfOspfRedistRestrictEntry  
SEQUENCE    
  IpAddress as hpicfOspfRedistRestrictAddr  
  IpAddress as hpicfOspfRedistRestrictMask  
  RowStatus as hpicfOspfRedistRestrictStatus