MRV-IN-REACH-CHARACTER-MIB

File: MRV-IN-REACH-CHARACTER-MIB.mib (353267 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215 MRV-IN-REACH-PRODUCT-DIVISION-MIB RFC1316-MIB
RFC1317-MIB

Imported symbols

Counter Gauge TimeTicks
IpAddress DisplayString sysLocation
OBJECT-TYPE TRAP-TYPE mrvInReachProductDivision
DateTime AddressType charPortIndex
rs232InSigState rs232OutSigState rs232PortIndex

Defined Objects

characterDep 1.3.6.1.4.1.33.2
OBJECT IDENTIFIER    

xCharacter 1.3.6.1.4.1.33.13
OBJECT IDENTIFIER    

xBasic 1.3.6.1.4.1.33.13.1
OBJECT IDENTIFIER    

basicBroadcast 1.3.6.1.4.1.33.13.1.1
Control for user ability to broadcast messages to other local ports. Corresponds directly to SERVER BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicErrorReport 1.3.6.1.4.1.33.13.1.2
Control for server display of an error when the user gives an unsupported command. Corresponds directly to SERVER REPORT ERRORS and the presence of the label 'Report Errors' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicLock 1.3.6.1.4.1.33.13.1.3
Control for user ability to use a password to protect a logged in terminal from other users. Corresponds directly to SERVER LOCK and the presence of the label 'Lock' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicInactivityTimer 1.3.6.1.4.1.33.13.1.4
Number of minutes a terminal may remain logged in with no sessions, no input or output, and no modem transitions. Corresponds directly to SERVER INACTIVITY TIMER and the value labeled 'Inactivity Timer:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..480  

basicPasswordRetryLimit 1.3.6.1.4.1.33.13.1.5
Number of times the server allows a user to retry an incorrect password. Corresponds directly to SERVER PASSWORD LIMIT and the value labeled 'Password Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..250  

basicPrivilegedPassword 1.3.6.1.4.1.33.13.1.6
The password a user must enter to become privileged. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER PRIVILEGED PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicLoginPassword 1.3.6.1.4.1.33.13.1.7
The password a user must enter to be given the opportunity to log in. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER LOGIN PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicLoginPrompt 1.3.6.1.4.1.33.13.1.8
The text string the server displays to prompt a user for the login password. Corresponds directly to SERVER LOGIN PROMPT.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

basicWelcome 1.3.6.1.4.1.33.13.1.9
The text string the server displays before attempting to log in a user. Corresponds directly to SERVER WELCOME and the value labeled 'Welcome:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

basicActivePorts 1.3.6.1.4.1.33.13.1.10
The number of ports with connected sessions or logged in users. Corresponds directly to the value labeled 'Active Ports:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActivePortsHigh 1.3.6.1.4.1.33.13.1.11
The highest value of basicActivePorts since system initialization. Corresponds directly to the value labeled 'Active Ports:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActiveUsers 1.3.6.1.4.1.33.13.1.12
The number of logged in users. Corresponds directly to the value labeled 'Active Users:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActiveUsersHigh 1.3.6.1.4.1.33.13.1.13
The highest value of basicActiveUsers since system initialization. Corresponds directly to the value labeled 'Active Users:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessions 1.3.6.1.4.1.33.13.1.14
The total number of connected sessions. Corresponds directly to the value labeled 'Connected Sessions:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessionsHigh 1.3.6.1.4.1.33.13.1.15
The highest value of basicSessions since system initialization. Corresponds directly to the value labeled 'Connected Sessions:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessionsLimit 1.3.6.1.4.1.33.13.1.16
The maximum total number of sessions that can simultaneously be connected to the system. A value of -1 indicates no limit up to available dynamic system memory. Corresponds directly to SERVER SESSION LIMIT and the value labeled 'Connected Sessions:' and 'Max' in the SERVER STATUS display.
OBJECT-TYPE    
  INTEGER -1..255  

basicPortTable 1.3.6.1.4.1.33.13.1.17
A list of basic character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortEntry

basicPortEntry 1.3.6.1.4.1.33.13.1.17.1
Basic parameter values for a port.
OBJECT-TYPE    
  BasicPortEntry  

basicPortIndex 1.3.6.1.4.1.33.13.1.17.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPortDefaultDestAction 1.3.6.1.4.1.33.13.1.17.1.2
The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER dedicated(1), preferred(2)  

basicPortDefaultDestProtocol 1.3.6.1.4.1.33.13.1.17.1.3
The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE.
OBJECT-TYPE    
  INTEGER lat(1), telnet(2), any(3)  

basicPortDefaultDestName 1.3.6.1.4.1.33.13.1.17.1.4
The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the value labeled 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. If the value of basicPortDefaultDestProtocol is 'telnet', an Internet port number may be included on the end of the name, delimited with a colon (':'). If the value of basicPortDefaultDestProtocol is not 'telnet', then the maximum length is 16.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

basicPortDefaultDestLATNodeName 1.3.6.1.4.1.33.13.1.17.1.5
A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. This object can have a non- zero-length value only if the value of basicPortDefaultDestProtocol is 'lat'.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortDefaultDestLATPortName 1.3.6.1.4.1.33.13.1.17.1.6
A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. this object can hav a non-zero-length value only if the value if basicPortDefaultDestProtocol is 'lat'
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortAutoConnect 1.3.6.1.4.1.33.13.1.17.1.7
Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAutoLogin 1.3.6.1.4.1.33.13.1.17.1.8
Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortBroadcast 1.3.6.1.4.1.33.13.1.17.1.9
Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortConnectResume 1.3.6.1.4.1.33.13.1.17.1.10
Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new connection. 'enabled' causes the existing connection to become the active connection. Corresponds directly to PORT CONNECTRESUME and the presence of the label 'Connectresume' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDialup 1.3.6.1.4.1.33.13.1.17.1.11
Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly to PORT DIALUP and the presence of the label 'Dial Up' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortIdleTimeout 1.3.6.1.4.1.33.13.1.17.1.12
The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 indicates no timeout. Zero is not a valid value. Corresponds directly to PORT IDLE TIMEOUT and the value labeled 'Idle Timeout:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER -1..480  

basicPortInactivityLogout 1.3.6.1.4.1.33.13.1.17.1.13
Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes for the time period specified by basicInactivityTimer. Corresponds directly to PORT INACTIVITY LOGOUT and the presence of the label 'Inactivity Logout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLossNotification 1.3.6.1.4.1.33.13.1.17.1.14
Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. Corresponds directly to PORT LOSS NOTIFICATION and the presence of the label 'Loss Notification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortMessageCodes 1.3.6.1.4.1.33.13.1.17.1.15
Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the presence of the label 'Message Codes' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortMultisessions 1.3.6.1.4.1.33.13.1.17.1.16
Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to PORT MULTISESSIONS and the presence of the label 'Multisessions' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultUserName 1.3.6.1.4.1.33.13.1.17.1.17
Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Port n:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortVerification 1.3.6.1.4.1.33.13.1.17.1.18
Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Corresponds directly to PORT VERIFICATION and the presence of the label 'Verification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultProtocol 1.3.6.1.4.1.33.13.1.17.1.19
The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Resolve Service:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER lat(1), telnet(2), anylat(3), anytelnet(13)  

basicPortLogins 1.3.6.1.4.1.33.13.1.17.1.20
The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortRemoteSessions 1.3.6.1.4.1.33.13.1.17.1.21
The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled 'Remote Accesses:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortIdleTimeouts 1.3.6.1.4.1.33.13.1.17.1.22
The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Timeouts:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortStatus 1.3.6.1.4.1.33.13.1.17.1.23
The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER idle(1), local(2), waitInput(3), executingCommand(4), connecting(5), checkConnect(6), waitOutput(7), connected(8), disconnecting(9), disconnect(10), suspended(11), locked(12), permanent(13), loginWait(14), retryConnect(15), connectWait(16), logout(17), login(18), waitSession(19), reset(20), testServiceWait(21), testServiceOut(22), connectPassword(23), waitLogout(24), waitQueue(25), cancelQueue(26), autobaud(27), available(28), checkModem(29), slip(30), signalWait(31), scriptSearch(32), scriptLoad(33), scriptRun(34), dialback1(35), dialback2(36), dialback3(37), xremote(38), ppp(39), cslip(40), arapInit(41), cclAnswer(42), cclOriginate(43), cclHangup(44), kerberos(45), securID(46), arapUser(47), arapDialback(48), arapSearch(49), arapLoad(50), arapRead(51), arapDialDone(52), arapExit(53), arapEnabling(54), arapConnecting(55), cclLoading(56), cclLoadError(57), cclLoadWaiting(58), cclExecute(59), cclDone(60), apd(61)  

basicPortLastInCharacter 1.3.6.1.4.1.33.13.1.17.1.24
The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicPortLastOutCharacter 1.3.6.1.4.1.33.13.1.17.1.25
The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicPortActiveUserName 1.3.6.1.4.1.33.13.1.17.1.26
The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the USERS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortDefaultSessionMode 1.3.6.1.4.1.33.13.1.17.1.27
Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (corresponds to PASSALL) binaryWithFlow recognize only XON and XOFF (corresponds to PASTHRU transparent recognize no data Corresponds directly to PORT DEFAULT SESSION MODE and the value labeled 'Default Session Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER interactive(1), binary(2), binaryWithFlow(3), transparent(4)  

basicPortZero 1.3.6.1.4.1.33.13.1.17.1.28
Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the port's counters to be zeroed. Corresponds to the ZERO PORT command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortZeroTime 1.3.6.1.4.1.33.13.1.17.1.29
The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPortZero. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the PORT COUNTERS display.
OBJECT-TYPE    
  TimeTicks  

basicPortUnixCommands 1.3.6.1.4.1.33.13.1.17.1.30
Control to allow the user to use Unix-style commands the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), primary(3), only(4)  

basicPortSessionMode 1.3.6.1.4.1.33.13.1.17.1.31
Data recognition mode for an active session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (corresponds to PASSALL) binaryWithFlow recognize only XON and XOFF (corresponds to PASTHRU transparent recognize no data noActiveSessions no sessions on this port. This object can be set to values of 1 to 4, but only if there is an active session on the port.
OBJECT-TYPE    
  INTEGER interactive(1), binary(2), binaryWithFlow(3), transparent(4), noActiveSessions(5)  

basicPortRemoteDisconnectNotify 1.3.6.1.4.1.33.13.1.17.1.32
If enabled, a BELL (ctrl G) will be sent out the serial port when a remote session is disconnected and the port is logged out.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultDestControlled 1.3.6.1.4.1.33.13.1.17.1.33
A control to send preconfigured controlled port session strings when entering or exiting a session established to the basicPortDefaultDestName. Corresponds directly to the value labeled '(Controlled)' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortControlledPortLogin 1.3.6.1.4.1.33.13.1.17.1.34
A control string to send out the serial port upon port login. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Port Login:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledPortLogout 1.3.6.1.4.1.33.13.1.17.1.35
A control string to send out the serial port upon port logout. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Port Logout:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledSessionInitialize 1.3.6.1.4.1.33.13.1.17.1.36
A control string to send out the serial port upon entering a session. Corresponds to the hexadecimal code which represented in ASCII following the label 'Controlled Session Initialize:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledSessionTerminate 1.3.6.1.4.1.33.13.1.17.1.37
A control string to send out the serial port upon exiting a session. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Session Terminate:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortRloginTransparentMode 1.3.6.1.4.1.33.13.1.17.1.38
A control to pass x'ff' as binary data, not doubling x'ff'. Similar to basicPortSessionMode = transparent but for a rlogin session.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLoginDuration 1.3.6.1.4.1.33.13.1.17.1.39
The amount of time in minutes that a port may remain logged in regardless of the activity on the port. The value 0 indicates that the timer is disabled. Corresponds directly to the value labeled 'Login Duration:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..64800  

basicPortOutboundSecurity 1.3.6.1.4.1.33.13.1.17.1.40
Control to disable outbound security, which can be either Kerberos or SecureID, on a per port basis. Corresponds directly to the presence of the value 'OutboundSecurity' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortXonTimer 1.3.6.1.4.1.33.13.1.17.1.41
Indicates the number of seconds between successive 'XON's sent out a port. A zero signifies that the timer is disabled. Corresponds directly to the value labeled 'Xon Send Timer:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..2550  

basicPortDefaultDedicatedSessionType 1.3.6.1.4.1.33.13.1.17.1.42
This integer is interpreted as a bit mask that specifies the default session type for a dedicated service for this port. The bit numbers are: 1;service name, 2;node name, 3;port name, 4, telnet console; 5, rlogin; 6, bridge console; 7, chassis console.
OBJECT-TYPE    
  INTEGER 0..168  

basicPortIdleTimeReceive 1.3.6.1.4.1.33.13.1.17.1.43
Control to restrict the basicPortIdleTimeout to apply to data received from the network and transmitted out the serial port. Data received by the serial port will not be considered activity. Corresponds directly to the value labeled 'Idle Time Receive Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortIdleTimeTransmit 1.3.6.1.4.1.33.13.1.17.1.44
Control to restrict the basicPortIdleTimeout to apply to data received from the serial port and transmitted out the LAN. Data received from the network will not count as activity. Corresponds directly to the value labeled 'Idle Time Transmit Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortZeroDisconnectSession 1.3.6.1.4.1.33.13.1.17.1.45
A control to disconnect a session at Port 0 when the password limit is reached.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortConsolePort 1.3.6.1.4.1.33.13.1.17.1.46
Control to configure this port as a console port. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortSensor and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLoginPassword 1.3.6.1.4.1.33.13.1.17.1.47
The password a user must enter to be given the opportunity to log in to a given port. For security reasons reading this object always returns a zero-length value. Corresponds directly to PORT LOGIN PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortSensor 1.3.6.1.4.1.33.13.1.17.1.48
Control to configure this port as a temperature and humidity sensor. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmControl 1.3.6.1.4.1.33.13.1.17.1.49
Control to configure this port for alarm input and control output. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort and basicPortSensor. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortCommandLogging 1.3.6.1.4.1.33.13.1.17.1.50
A control to toggle logging of commands at this port. Command input may be logged from direct terminal connections, session input from the LAN, or session output to the LAN. Corresponds directly to the presence of 'Command Logging' under the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortBreakSequence 1.3.6.1.4.1.33.13.1.17.1.51
A sequence of characters to be sent out the serial port on receipt of a Break from the network in lieu of a hardware break. The sequence entered by the user is converted into an octet string up to four bytes long to be sent out the serial port. For example, the user's representation of octal 2, or '', takes four characters in basicPortBreakSequence; but only one byte in the string sent out the serial port.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

basicPortTl1Mode 1.3.6.1.4.1.33.13.1.17.1.53
Controls the TL1 mode of a port. Valid TL1 modes are human- to-machine language (hml), machine-to-machine language (mml), and MML without echo. MML is for direct connection to another TL1 device whereas HML provides human prompts. A change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), hml(2), mml(3), mmlNoEcho(4)  

basicPortTl1Console 1.3.6.1.4.1.33.13.1.17.1.54
Controls whether this port becomes the TL1 console receiving and displaying autonomous reports of alarm events. A change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortFallThrough 1.3.6.1.4.1.33.13.1.17.1.55
Control to allow a user to login to a port after RADIUS or SecurID authentication fails because the RADIUS servers or SecurID servers are unavailable. When a user is logged in via 'fallthrough', he is logged in to the port as a non-privileged user. The change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortCommandLoggingSuppressControlCharacters 1.3.6.1.4.1.33.13.1.17.1.56
Control to toggle suppression of control characters in the command log. This object can only be set to enabled when command logging is enabled on that port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDataLogging 1.3.6.1.4.1.33.13.1.17.1.57
Control to toggle data logging on the specified port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDataLoggingSuppressControlCharacters 1.3.6.1.4.1.33.13.1.17.1.58
Control to toggle suppression of control characters in the data log. This object can only be set to enabled when data logging is enabled on that port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortOnboardSecurity 1.3.6.1.4.1.33.13.1.17.1.59
A control to toggle onboard security for this port where the username and password are authenticated against an internal access list. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortFallBack 1.3.6.1.4.1.33.13.1.17.1.60
Control to allow a 'fallback' authentication mechanism after RADIUS or SecurID authentication fails because the RADIUS or SecurID servers are unavailable. Onboard security, an internal security database, is used for fallback authentication. The user in fallback mode must enter a valid username and password to be successfully logged in. The change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMaster 1.3.6.1.4.1.33.13.1.17.1.61
Control to configure this port for high densitiy alarm input and control output management. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort, basicPortSensor and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterAccounting 1.3.6.1.4.1.33.13.1.17.1.62
Control to toggle logging of alarm events on this port. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterAudibleAlarm 1.3.6.1.4.1.33.13.1.17.1.63
Control whether the alarm will have an audible sound for all alarm points attached to this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterFixTime 1.3.6.1.4.1.33.13.1.17.1.64
Time in minutes between audible alarm soundings for an alarm master port. This occurs after someone hits the master alarm reset button. If there is at least one alarm condition on an alarm point within the fix time, then the alarm will sound again at the end of that fix time.
OBJECT-TYPE    
  INTEGER 1..720  

basicPortAlarmMasterLcdDisplayString 1.3.6.1.4.1.33.13.1.17.1.65
Updates the LCD display message for the high density alarm unit attached to the port. Corresponds directly to the DISPLAY AMST command.
OBJECT-TYPE    
  DisplayString SIZE(32)  

basicPortAlarmMasterReboot 1.3.6.1.4.1.33.13.1.17.1.66
Control to reboot the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Corresponds directly to the REBOOT AMST command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortAlarmMasterUpdateFirmwareHost 1.3.6.1.4.1.33.13.1.17.1.67
The internet address of the server to use when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corresponds directly to the UPDATE AMST FIRMWARE command's INTERNET ADDRESS parameter.
OBJECT-TYPE    
  IpAddress  

basicPortAlarmMasterUpdateFirmwareFileName 1.3.6.1.4.1.33.13.1.17.1.68
The filename to request when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corresponds directly to the UPDATE AMST FIRMWARE command's FILE parameter.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

basicPortAlarmMasterUpdateFirmware 1.3.6.1.4.1.33.13.1.17.1.69
Control to update firmware for the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. The basicPortAlarmMasterUpdateFirmwareHost and basicPortAlarmMasterUpdateFirmwareFileName must be set prior to setting this object. Corresponds directly to the UPDATE AMST FIRMWARE command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortAlarmMasterStatus 1.3.6.1.4.1.33.13.1.17.1.70
Indicates the current status of the high density alarm unit attached to the port. If no response is obtained from this unit, the status is set to basicPortAlarmMasterFaultSeverity. Otherwise it is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortAlarmMasterFaultSeverity 1.3.6.1.4.1.33.13.1.17.1.71
Control to determine the severity level associated with the trap sent out when a fault occurs when no response is obtained from the high density alarm unit attached to this port.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortPowerMaster 1.3.6.1.4.1.33.13.1.17.1.72
Control to configure this port as a power master port. This control is only valid on those models with variable configuration ports and which support the power master. This object can only be set enabled, and doing so will disable the previous port type, such as basicPortConsolePort. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortPowerMasterTimeDelay 1.3.6.1.4.1.33.13.1.17.1.73
Control to set the power up delay interval in milliseconds for the power device attached to this port. A response of 'none' to a get-request or get-next-request may indicate that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  INTEGER none(1), oneHundred(100), twoHundred(200), threeHundred(300), fourHundred(400), fiveHundred(500), sixHundred(600), sevenHundred(700), eightHundred(800), nineHundred(900)  

basicPortPowerMasterSwitch 1.3.6.1.4.1.33.13.1.17.1.74
Control to power on or off all of the outlets in the power device attached to this port. A get-request or a get-next- request always returns ready.
OBJECT-TYPE    
  INTEGER ready(1), off(2), on(3)  

basicPortPowerMasterModel 1.3.6.1.4.1.33.13.1.17.1.75
The model number of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

basicPortPowerMasterSerialNumber 1.3.6.1.4.1.33.13.1.17.1.76
The serial number of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

basicPortPowerMasterFirmware 1.3.6.1.4.1.33.13.1.17.1.77
The firmware version of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..12)  

basicPortLockout 1.3.6.1.4.1.33.13.1.17.1.78
Control to prohibit access to this port and send a trap when login authentication fails. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAsciiToTrapTranslation 1.3.6.1.4.1.33.13.1.17.1.79
Control to configure the port as an ascii-to-trap translator. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAsciiToTrapTranslationTrapSeverity 1.3.6.1.4.1.33.13.1.17.1.80
Control to determine the severity level associated with the trap sent out from this port. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortAsciiToTrapTranslationMessages 1.3.6.1.4.1.33.13.1.17.1.81
Count of number of trap messages sent from this port.
OBJECT-TYPE    
  Counter  

basicPortAsciiToTrapTranslationLastMessage 1.3.6.1.4.1.33.13.1.17.1.82
The last message or partial message sent out by this port.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

basicPortPowerMasterAlarmSeverity 1.3.6.1.4.1.33.13.1.17.1.83
Control to determine the severity level associated with the trap sent out when the power device is not responding to this port.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortPowerMasterDeviceStatus 1.3.6.1.4.1.33.13.1.17.1.84
Indicates the current status of the power device controlled by this port. If the device is responding, the status is cleared. Otherwise the status matches the basicPortPowerMasterAlarmSeverity.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortBuffering 1.3.6.1.4.1.33.13.1.17.1.85
Control to allow data from an attached device to be retained across multiple sessions. When a session is established to a port with buffering, the contents of the command buffer is sent to the remote device. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLogFacilityLevel 1.3.6.1.4.1.33.13.1.17.1.86
Indicates that server originated accounting messages pertaining to this port are logged to the syslog host at this UNIX facility level. If 'none', the server's sessionLogFacility is used.
OBJECT-TYPE    
  INTEGER none(1), local0(2), local1(3), local2(4), local3(5), local4(6), local5(7), local6(8), local7(9), user(10)  

basicPortPppDialBackup 1.3.6.1.4.1.33.13.1.17.1.87
Indicates whether this port is configured as a PPP dial backup port. This parameter will not take effect until the port is logged out, and this function is restricted to one port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortPppDialBackupNumber 1.3.6.1.4.1.33.13.1.17.1.88
The number to dial when a PPP dial backup link is activated, which occurs when the network is down and there are SNMP traps to forward. The port must be a basicPortPppDialBackup port, and it must be logged out for the change to take effect.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPortPppDialBackupRedialTimer 1.3.6.1.4.1.33.13.1.17.1.89
Indicates the time in seconds to wait before redialing the basicPortPppDialBackupNumber on a basicPortPppDialBackup port.
OBJECT-TYPE    
  INTEGER 30..65535  

basicPortPppDialBackupRedialRetries 1.3.6.1.4.1.33.13.1.17.1.90
Indicates the number of time to try to dial the backup number before recording an error, logging out the port, and if there are new traps trying to dial again.
OBJECT-TYPE    
  INTEGER 1..65535  

basicPortPppDialBackupDisconnectTimer 1.3.6.1.4.1.33.13.1.17.1.91
Indicates the time in seconds that the dial backup link will stay up when there is no more SNMP traffic flowing prior to disconnecting it.
OBJECT-TYPE    
  INTEGER 1..65535  

basicPortPppDialBackupLocalAddress 1.3.6.1.4.1.33.13.1.17.1.92
The local address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward.
OBJECT-TYPE    
  IpAddress  

basicPortPppDialBackupDestinationAddress 1.3.6.1.4.1.33.13.1.17.1.93
The destination address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward.
OBJECT-TYPE    
  IpAddress  

basicPortPppDialBackupAddresses 1.3.6.1.4.1.33.13.1.17.1.94
Control to initiate dialing from a dial backup port. In response to get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' after a valid basicPortPppDialBackupLocalAddress and basicPortPppDialBackupDestinationAddress are configured causes the basicPortPppDialBackup port to dial the basicPortPppDialBackupNumbermber.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicSerialPortTable 1.3.6.1.4.1.33.13.1.18
A list of basic character serial port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicSerialPortEntry

basicSerialPortEntry 1.3.6.1.4.1.33.13.1.18.1
Basic parameter values for a serial port.
OBJECT-TYPE    
  BasicSerialPortEntry  

basicSerialPortIndex 1.3.6.1.4.1.33.13.1.18.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicSerialPortBreak 1.3.6.1.4.1.33.13.1.18.1.2
Action to take on a BREAK condition from the port. Corresponds directly to PORT BREAK and the value labeled 'Break:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER ignore(1), localSwitch(2), sendRemote(3)  

basicSerialPortInterrupts 1.3.6.1.4.1.33.13.1.18.1.3
Control for recognizing BREAK or local switch to interrupt a session. Corresponds directly to PORT INTERRUPTS and the presence of the label 'Interrupts' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortNoLoss 1.3.6.1.4.1.33.13.1.18.1.4
Control for storing port input locally in anticipation of session startup. Corresponds directly to PORT NOLOSS and the presence of the label 'Noloss' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPause 1.3.6.1.4.1.33.13.1.18.1.5
Control for pausing after each screenful of locally-originated output to the port. Corresponds directly to PORT PAUSE and the presence of the label 'Pause' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPrompt 1.3.6.1.4.1.33.13.1.18.1.6
Prompt for the system to use on the port. Corresponds directly to PORT PROMPT and the value labeled 'Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

basicSerialPortTerminalType 1.3.6.1.4.1.33.13.1.18.1.7
Type of terminal attached to the port, for formatting local output. Corresponds directly to PORT TYPE and the value labeled 'Type:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER ansi(1), hardcopy(2), softcopy(3)  

basicSerialPortTypeaheadLimit 1.3.6.1.4.1.33.13.1.18.1.8
Maximum number of input characters to hold pending tranmission on a session. Corresponds directly to PORT TYPEAHEAD SIZE and the value labeled 'Typeahead Size:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 80..16384  

basicSerialPortBackwardSwitch 1.3.6.1.4.1.33.13.1.18.1.9
Character input from the character port to cause a switch to the previous, lower numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT BACKWARD SWITCH and the value labeled 'Backwards Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortForwardSwitch 1.3.6.1.4.1.33.13.1.18.1.10
Character input from the character port to cause a switch to the next, higher numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT FORWARD SWITCH and the value labeled 'Forwards Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLocalSwitch 1.3.6.1.4.1.33.13.1.18.1.11
Character input from the character port to cause a switch to local command mode. The value 0 indicates no character has this effect. Corresponds directly to PORT LOCAL SWITCH and the value labeled 'Local Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortModemControl 1.3.6.1.4.1.33.13.1.18.1.12
Control for observing hardware modem control signals. Corresponds directly to PORT MODEM CONTROL and the value labeled 'Modem Control:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortSignalCheck 1.3.6.1.4.1.33.13.1.18.1.13
Control for observing DSR and DCD to bound allowing sessions. Corresponds directly to PORT SIGNAL CHECK and the presence of the label 'Signal Check' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDSRLogout 1.3.6.1.4.1.33.13.1.18.1.14
Control for logging out the port when DCD is deasserted. Corresponds directly to PORT DSRLOGOUT and the presence of the label 'DSRlogout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDSRObserve 1.3.6.1.4.1.33.13.1.18.1.15
Control for beginning the login sequence on the port when DCD is asserted. Corresponds directly to PORT DSRWAIT and the presence of the label 'DSRwait' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDCDTimeout 1.3.6.1.4.1.33.13.1.18.1.16
The number of milleseconds that DCD may be asserted before disconnecting the port. Corresponds directly to PORT DCD TIMEOUT and the value labeled 'DCD Timeout:' in the PORT ALTERNATE CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER 0..10000  

basicSerialPortDTRAssert 1.3.6.1.4.1.33.13.1.18.1.17
Control when the system asserts DTR on the port. always unconditional(DISABLED) onConnectionOrRing connection formed or RING asserted(ENABLED) onConnection connection formed (FORCONNECTION) onRing RING asserted (FORRING) Corresponds directly to PORT DTRWAIT and the value labeled 'DTR Wait:' in the PORT ALTERNATE CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER always(1), onConnectionOrRing(2), onConnection(3), onRing(4)  

basicSerialPortLimitedCommands 1.3.6.1.4.1.33.13.1.18.1.18
Control for limiting the commands available to the user on the port. Corresponds directly to PORT SECURITY and the presence of the label 'Security' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLimitedView 1.3.6.1.4.1.33.13.1.18.1.19
Control for restricting what a user may display. Corresponds directly to PORT LIMITED VIEW and the presence of the label 'Limited View' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPassword 1.3.6.1.4.1.33.13.1.18.1.20
Control for requiring the user to supply the login password to log in on the port. Corresponds directly to PORT PASSWORD and the presence of the label 'Password' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLineEditor 1.3.6.1.4.1.33.13.1.18.1.21
Control for allowing the user to use local mode command line editing. Corresponds directly to PORT LINE EDITOR and the presence of the label 'Line Editor' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLineEditorBackspace 1.3.6.1.4.1.33.13.1.18.1.22
Character input from the character port to move the cursor to the left. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BACKSPACE and the value labeled 'Backspace Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorBeginning 1.3.6.1.4.1.33.13.1.18.1.23
Character input from the character port to move the cursor to the beginning of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BEGINNING and the value labeled 'Begin Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorCancel 1.3.6.1.4.1.33.13.1.18.1.24
Character input from the character port to cancel an interactive dialog or delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR CANCEL and the value labeled 'Cancel Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorDeleteBeginning 1.3.6.1.4.1.33.13.1.18.1.25
Character input from the character port to delete the current line from the cursor to the beginning. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE BEGINNING and the value labeled 'Delete Begin Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorDeleteLine 1.3.6.1.4.1.33.13.1.18.1.26
Character input from the character port to delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE LINE and the value labeled 'Delete Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorEnd 1.3.6.1.4.1.33.13.1.18.1.27
Character input from the character port to move the cursor to the end of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR END and the value labeled 'End of Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorForward 1.3.6.1.4.1.33.13.1.18.1.28
Character input from the character port to move the cursor to the right. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR FORWARDS and the value labeled 'Forwards Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorInsertToggle 1.3.6.1.4.1.33.13.1.18.1.29
Character input from the character port to toggle between insert and overwrite modes. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR INSERT TOGGLE and the value labeled 'Insert Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorNextLine 1.3.6.1.4.1.33.13.1.18.1.30
Character input from the character port to recall the next, newer line in the command history. The value -1 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR NEXT LINE and the value labeled 'Next Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorPreviousLine 1.3.6.1.4.1.33.13.1.18.1.31
Character input from the character port to recall the previous, older line in the command history. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR PREVIOUS LINE and the value labeled 'Previous Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorQuotingCharacter 1.3.6.1.4.1.33.13.1.18.1.32
Character input from the character port to inhibit interpretation of the next input character. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR QUOTING CHARACTER and the value labeled 'Quoting Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorRedisplay 1.3.6.1.4.1.33.13.1.18.1.33
Character input from the character port to redisplay the current command line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR REDISPLAY CHARACTER and the value labeled 'Redisplay Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortQuadartReceiveDiscard 1.3.6.1.4.1.33.13.1.18.1.34
Control for discard of received errors from quadart hardware.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortAPDProtocols 1.3.6.1.4.1.33.13.1.18.1.35
A bit map that specifies the protocols that this port will attempt to detect using the Auto Protocol Detection function. The bit numbers for the protocols are: 1;ARAP, 3;Interactive, 4;SLIP, 5;PPP. Bits 6-16 are reserved for future use. More than one of these protocols may be ORed together. The default is 0 (zero) no protocols.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

basicSerialPortAPDTimeout 1.3.6.1.4.1.33.13.1.18.1.36
A time value, in seconds, that specifies how long the port will attempt to determine which protocol is coming into the port. When basicSerialPortAPDTimeout seconds have expired, the port will assume the protocol to use is that specified by basicSerialPortAPDDefaultProtocol. A value of 0 (zero provides an unlimited timeout.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortAPDDefaultProtocol 1.3.6.1.4.1.33.13.1.18.1.37
A bit map that specifies the protocol that this port will use when the time specified by basicSerialPortAPDTimeout has expired without sucessfully identifying the incoming porotocol. The bit numbers for the protocols are: None;Logout the port, 1;ARAP, 2;CSLIP, 3;Interactive, 4;SLIP, 5;PPP. Bits 6-16 are reserved for future use. Only one protocol may be specified for this object
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

basicSerialPortUsernameCharSet 1.3.6.1.4.1.33.13.1.18.1.38
A control, that if set to seven-bit, will allow only the ASCII printable characters in the range SP (X20) to ~ (X7E) in the username field. A value of none allows any character
OBJECT-TYPE    
  INTEGER none(1), seven-bit(2)  

basicSerialPortAutoHangup 1.3.6.1.4.1.33.13.1.18.1.39
A control that, if enabled, will cause the port to be logged off when the last session on that port is destroyed
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortCommandSize 1.3.6.1.4.1.33.13.1.18.1.40
Maximum number of input characters to hold in the command buffer. Corresponds directly to the PORT COMMAND SIZE and the value labeled 'Command Size:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 80..16384  

basicSerialPortAutoProtocolDetectPrompt 1.3.6.1.4.1.33.13.1.18.1.41
Controls whether to send the basicAutoProtocolDetectMessage out the serial port at the beginning of auto protocol detection mode. Corresponds to the value labeled 'APD Prompt' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortUsernamePrompt 1.3.6.1.4.1.33.13.1.18.1.42
The text string used to prompt for a user's name. Corresponds directly to the value labeled 'Username Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..25)  

basicSerialPortPasswordPrompt 1.3.6.1.4.1.33.13.1.18.1.43
The text string used to prompt for a user's password. Corresponds directly to the value labeled 'Password Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..25)  

basicSerialPortAutoProtocolDetectSecurityInteractiveOnly 1.3.6.1.4.1.33.13.1.18.1.44
Controls whether Auto Protocol Detect (APD) authentication applies only to interactive users, and not to other APD protocols such as PPP. Corresponds directly to the value labeled 'APD Authentication Interactive Only:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDedicatedUserData 1.3.6.1.4.1.33.13.1.18.1.45
The text string to send at the beginning of a connection to a Telnet dedicated service. Corresponds to the value labeled 'UserData:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicSerialPortIpAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.47
Control to enable a non-standard method of acquiring the IP address after boot completes via the BOOTP protocol. Corresponds to the value labeled 'IP Address Auto Discovery' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDedicatedKickStartData 1.3.6.1.4.1.33.13.1.18.1.48
A text string which is used to compare at login time to incoming serial data. A match will initiate a telnet session to a dedicated service. Corresponds to the value labeled 'KickStart:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicSerialPortBreakLength 1.3.6.1.4.1.33.13.1.18.1.50
Specifies the duration in milliseconds of a remote serial break which is sent via the Telnet Break command. Corresponds directly to the value labeled 'Break Length:' in the PORT CHARACTERISTIC display.
OBJECT-TYPE    
  INTEGER ms250(1), ms500(2), ms750(3)  

basicSerialPortRotaryRoundRobin 1.3.6.1.4.1.33.13.1.18.1.51
Controls whether a port which participates in an internet rotary is selected in round robin or fixed priority order. Corresponds directly to the value labeled 'Round Robin search:' in the SERVER INTERNET ROTARY display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortWelcomeBeforeAuthentication 1.3.6.1.4.1.33.13.1.18.1.52
Control to display the basicWelcome message prior to authenticating the user. Corresponds to the presence of the value 'Welcome-Banner-Pre-Authentication' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortGatewayAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.53
Control to enable a non-standard method of acquiring the gateway address after boot completes via the bootp protocol.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortSubnetAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.54
Control to enable a non-standard method of acquiring the subnet mask after boot completes via the bootp protocol.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortRaiseLowerDtr 1.3.6.1.4.1.33.13.1.18.1.55
A control to to raise or lower the DTR signal from this port by setting it to high or low, respectively. This request will have no effect unless basicSerialPortRaiseControlDtr is enabled. In response to a get-request or get-next-request the agent always returns low for this object.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

basicSerialPortRaiseControlDtr 1.3.6.1.4.1.33.13.1.18.1.56
Controls the ability to change the state of DTR using basicSerialPortRaiseLowerDTR. This characteristic is not intended for use with modem ports. Corresponds directly to the presence of 'Control DTR' under the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortIpConfigureBootp 1.3.6.1.4.1.33.13.1.18.1.57
Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name. This object was moved to the MRV-IN-REACH-INTERNET-MIB for InReach agent software version V2.4.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicConsoleLogoutDisconnect 1.3.6.1.4.1.33.13.1.19
Control for automatic session disconnection when a console port user logs out. Corresponds directly to SERVER CONSOLE LOGOUT and the presence of the label 'Console Logout' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicControlledPorts 1.3.6.1.4.1.33.13.1.20
Status of Controlled Ports feature. Corresponds directly to the 'Controlled Ports' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. Enabling this feature causes strings of control characters to be sent out on a port upon starting and/or stopping a session
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortSessionTable 1.3.6.1.4.1.33.13.1.21
A list of port session entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortSessEntry

basicPortSessEntry 1.3.6.1.4.1.33.13.1.21.1
Status and parameter values for a basic port session.
OBJECT-TYPE    
  BasicPortSessEntry  

basicPortPortIndex 1.3.6.1.4.1.33.13.1.21.1.1
The value of basicPortIndex for the port to which this session belongs. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPortSessIndex 1.3.6.1.4.1.33.13.1.21.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation. The session identified by a particular value of this index is the same session as identified by charSessIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicSessControlled 1.3.6.1.4.1.33.13.1.21.1.3
A control to send preconfigured controlled port session strings out the serial port when entering or exiting this session. Corresponds directly to the value labeled 'Controlled' under the Service Mode header in the SESSION display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortSessEncryption 1.3.6.1.4.1.33.13.1.22
Status of the default encryption value to be set for each session. Corresponds directly to Console Security on SHOW SERVER screen.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicTemperatureUnits 1.3.6.1.4.1.33.13.1.23
Indicates the units of measurement for the temperature sensors.
OBJECT-TYPE    
  INTEGER fahrenheit(1), celcius(2)  

basicEnvironmentalManagerCircuitBreaker 1.3.6.1.4.1.33.13.1.24
Indicates whether the circuit breaker is activated.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicContactClosureOrAlarmInputTable 1.3.6.1.4.1.33.13.1.25
Information about contact closures or alarm inputs.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicContactClosureOrAlarmInputEntry

basicContactClosureOrAlarmInputEntry 1.3.6.1.4.1.33.13.1.25.1
An entry in the basicContactClosureOrAlarmInputTable.
OBJECT-TYPE    
  BasicContactClosureOrAlarmInputEntry  

basicContactClosureOrAlarmInputValue 1.3.6.1.4.1.33.13.1.25.1.1
Indicates the state of the contact closure or alarm input.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicContactClosureOrAlarmInputName 1.3.6.1.4.1.33.13.1.25.1.2
The name used to identify this contact closure or alarm input.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputTrapEnable 1.3.6.1.4.1.33.13.1.25.1.3
Control to send trap when contact closure or alarm input changes state.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicContactClosureOrAlarmInputFaultSeverity 1.3.6.1.4.1.33.13.1.25.1.4
Control to determine the severity level associated with the trap sent out when a fault occurs for a given contact closure or alarm input.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicContactClosureOrAlarmInputFaultState 1.3.6.1.4.1.33.13.1.25.1.5
Control to indicate which state, open or closed, represents the fault condition. The other state is the cleared condition.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicContactClosureOrAlarmInputStatus 1.3.6.1.4.1.33.13.1.25.1.6
Indicates the current status of the contact closure or alarm input. If the basicContactClosureOrAlarmInputValue matches the fault state, then the status is equal to the fault severity. Otherwise the status is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicContactClosureOrAlarmInputZone 1.3.6.1.4.1.33.13.1.25.1.7
The name used to identify the zone where the equipment resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputRelatedEquipment 1.3.6.1.4.1.33.13.1.25.1.8
The name used to identify related equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputSiteId 1.3.6.1.4.1.33.13.1.25.1.9
The name used to identify the site where the unit resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputIndex 1.3.6.1.4.1.33.13.1.25.1.10
An index which uniquely identifies the contact closure or alarm input.
OBJECT-TYPE    
  INTEGER  

basicContactClosureOrAlarmInputManufacturer 1.3.6.1.4.1.33.13.1.25.1.11
The name used to identify the manufacturer of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputModel 1.3.6.1.4.1.33.13.1.25.1.12
The model name of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerOutletTable 1.3.6.1.4.1.33.13.1.26
Information about Environmental Manager Power Outlets.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPowerOutletEntry

basicPowerOutletEntry 1.3.6.1.4.1.33.13.1.26.1
An entry in the basicPowerOutletTable.
OBJECT-TYPE    
  BasicPowerOutletEntry  

basicPowerOutletOnOff 1.3.6.1.4.1.33.13.1.26.1.1
Controls turning on or off the power for the device connected to this power outlet.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerOutletReboot 1.3.6.1.4.1.33.13.1.26.1.2
Controls rebooting of the device attached this power outlet.
OBJECT-TYPE    
  INTEGER 1..1  

basicPowerOutletName 1.3.6.1.4.1.33.13.1.26.1.3
A name used to identify this power outlet.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPowerOutletRedundant 1.3.6.1.4.1.33.13.1.26.1.4
Controls whether power outlets in bank A have redundant outlets in bank B. When enabled, powering on an outlet in bank A will simultaneously power on the corresponding outlet number in bank B.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPowerOutletConsoleName 1.3.6.1.4.1.33.13.1.26.1.5
A name used to identify a console port on a unit with power outlet managment.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPowerOutletHighCurrent 1.3.6.1.4.1.33.13.1.26.1.6
A control to indicate a high current unit is attached to this power outlet. When enabled the high current unit will provide current when it detects no power from the power outlet; and will stop the current when the outlet resumes power. This control only works on those InReach devices which support the high current unit such as the IRMGR0. Corresponds directly to the value labeled 'HCNC Setting' in the INREACH MANAGER OUTLET STATUS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPowerOutletIndex 1.3.6.1.4.1.33.13.1.26.1.10
An index which uniquely identifies a power outlet.
OBJECT-TYPE    
  INTEGER  

basicTemperatureHumiditySensor 1.3.6.1.4.1.33.13.1.27
OBJECT IDENTIFIER    

basicTemperatureSensorTable 1.3.6.1.4.1.33.13.1.27.1
Information about Environmental Manager Temperature Sensors.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicTemperatureSensorEntry

basicTemperatureSensorEntry 1.3.6.1.4.1.33.13.1.27.1.1
An entry in the basicTemperatureSensorTable.
OBJECT-TYPE    
  BasicTemperatureSensorEntry  

basicTempTrapHighThreshold 1.3.6.1.4.1.33.13.1.27.1.1.1
The temperature at or above which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicTempTrapLowThreshold 1.3.6.1.4.1.33.13.1.27.1.1.2
The temperature at or below which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicTemperatureSensor 1.3.6.1.4.1.33.13.1.27.1.1.3
Controls the enabling or disabling of a temperature sensor.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicTemperatureValue 1.3.6.1.4.1.33.13.1.27.1.1.4
The current temperature reading for this sensor.
OBJECT-TYPE    
  INTEGER  

basicTemperatureAlarmSeverity 1.3.6.1.4.1.33.13.1.27.1.1.5
Control to determine the severity level associated with the trap sent out when the temperature reading is out-of-bounds.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicTemperatureAlarmStatus 1.3.6.1.4.1.33.13.1.27.1.1.6
Indicates the current status of the temperature sensor. If the basicTemperatureValue falls within the normal range, the status is cleared. Otherwise the status matches the alarm severity level.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicTemperatureHumiditySensorName 1.3.6.1.4.1.33.13.1.27.1.1.7
The name used to identify this temperature sensor.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicTemperatureSensorIndex 1.3.6.1.4.1.33.13.1.27.1.1.10
An index which uniquely identifies a temperature sensor.
OBJECT-TYPE    
  INTEGER  

basicHumiditySensorTable 1.3.6.1.4.1.33.13.1.27.2
Information about Environmental Manager Humidity Sensors.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicHumiditySensorEntry

basicHumiditySensorEntry 1.3.6.1.4.1.33.13.1.27.2.1
An entry in the basicHumiditySensorTable.
OBJECT-TYPE    
  BasicHumiditySensorEntry  

basicHumidityTrapHighThreshold 1.3.6.1.4.1.33.13.1.27.2.1.1
The humidity at or above which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicHumidityTrapLowThreshold 1.3.6.1.4.1.33.13.1.27.2.1.2
The humidity at or below which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicHumiditySensor 1.3.6.1.4.1.33.13.1.27.2.1.3
Controls the enabling or disabling of a humidity sensor.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicHumidityValue 1.3.6.1.4.1.33.13.1.27.2.1.4
The current humidity reading for this sensor.
OBJECT-TYPE    
  INTEGER  

basicHumidityAlarmSeverity 1.3.6.1.4.1.33.13.1.27.2.1.5
Control to indicate the severity level associated with the trap sent out when the humidity reading is out-of-bounds.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicHumidityAlarmStatus 1.3.6.1.4.1.33.13.1.27.2.1.6
Indicates the current status of the humidity sensor. If the basicHumidityValue falls within the normal range, the status is cleared. Otherwise the status matches the alarm severity level.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicHumiditySensorIndex 1.3.6.1.4.1.33.13.1.27.2.1.10
An index which uniquely identifies a humidity sensor.
OBJECT-TYPE    
  INTEGER  

basicControlSignalTable 1.3.6.1.4.1.33.13.1.28
Information about Environmental Manager Control Signal points.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlSignalEntry

basicControlSignalEntry 1.3.6.1.4.1.33.13.1.28.1
An entry in the basicControlSignalTable.
OBJECT-TYPE    
  BasicControlSignalEntry  

basicControlSignalValue 1.3.6.1.4.1.33.13.1.28.1.1
Sets and reads the state of the control signal point.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

basicControlSignalIndex 1.3.6.1.4.1.33.13.1.28.1.10
An index which uniquely identifies a control signal point.
OBJECT-TYPE    
  INTEGER  

basicPowerAlarmTimer 1.3.6.1.4.1.33.13.1.29
The polling interval in seconds for the fuse and power supply status. An alarm trap is issued on power failure.
OBJECT-TYPE    
  INTEGER 1..60  

basicControlOutputTable 1.3.6.1.4.1.33.13.1.30
Information about controlled output distribution points.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlOutputEntry

basicControlOutputEntry 1.3.6.1.4.1.33.13.1.30.1
An entry in the basicControlOutputTable.
OBJECT-TYPE    
  BasicControlOutputEntry  

basicControlOutputSignalDtrRts 1.3.6.1.4.1.33.13.1.30.1.1
Controls the raising or lowering of a signal on a distribution control signal point. The signal is DTR when the basicControlOutputIndex is odd, or RTS when the basicControlOutputIndex is even.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

basicControlOutputName 1.3.6.1.4.1.33.13.1.30.1.2
The name used to identify this distribution control signal point.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicControlOutputIndex 1.3.6.1.4.1.33.13.1.30.1.10
An index which uniquely identifies a distribution control signal point.
OBJECT-TYPE    
  INTEGER  

basicPowerStatusFuseA 1.3.6.1.4.1.33.13.1.31
Indicates the status of fuse bank A.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerStatusFuseB 1.3.6.1.4.1.33.13.1.32
Indicates the status of fuse bank B.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerSupplyStatusA 1.3.6.1.4.1.33.13.1.33
Indicates the status of power supply A.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerSupplyStatusB 1.3.6.1.4.1.33.13.1.34
Indicates the status of power supply B.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPortTrapTable 1.3.6.1.4.1.33.13.1.35
A list of traps associated with signal control changes on ports.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortTrapEntry

basicPortTrapEntry 1.3.6.1.4.1.33.13.1.35.1
Administrative status of signal change traps for a hardware port.
OBJECT-TYPE    
  BasicPortTrapEntry  

basicPortTrapIndex 1.3.6.1.4.1.33.13.1.35.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by rs232PortIndex in the standard rs232 MIB.
OBJECT-TYPE    
  INTEGER  

basicPortSignalName 1.3.6.1.4.1.33.13.1.35.1.2
Identification of the hardware signal as specified in RFC1659 as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dts Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector Some agents do not support DSR since its pin is shared with DCD.
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6)  

basicPortTrapStatus 1.3.6.1.4.1.33.13.1.35.1.3
Control to toggle the sending of a trap on a specific signal change on a physical port. One must logout the port prior to this taking effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputTable 1.3.6.1.4.1.33.13.1.36
Information about the high density alarm manager's alarm inputs.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicAlarmMasterInputEntry

basicAlarmMasterInputEntry 1.3.6.1.4.1.33.13.1.36.1
An entry in the basicAlarmMasterInputTable.
OBJECT-TYPE    
  BasicAlarmMasterInputEntry  

basicAlarmMasterInputPort 1.3.6.1.4.1.33.13.1.36.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputSlot 1.3.6.1.4.1.33.13.1.36.1.2
An index value that uniquely identifies a slot of alarm points on a given high density alarm port.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputPoint 1.3.6.1.4.1.33.13.1.36.1.3
An index value that uniquely identifies an alarm point within an alarm slot on a high density alarm port.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputName 1.3.6.1.4.1.33.13.1.36.1.4
The name used to identify this alarm point.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputTrapEnable 1.3.6.1.4.1.33.13.1.36.1.5
Control to send a trap when the alarm input changes state.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterControlOutputSignal 1.3.6.1.4.1.33.13.1.36.1.6
Control to toggle the output signal for an alarm point.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterInputEnable 1.3.6.1.4.1.33.13.1.36.1.7
Control to toggle whether this alarm point is active.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputDebounceInterval 1.3.6.1.4.1.33.13.1.36.1.8
Amount of time in seconds to debounce a signal change before triggering an alarm.
OBJECT-TYPE    
  INTEGER 0..30  

basicAlarmMasterInputFaultSeverity 1.3.6.1.4.1.33.13.1.36.1.9
Control to determine the severity level associated with the trap sent out when a fault occurs for this alarm input point.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicAlarmMasterInputFaultState 1.3.6.1.4.1.33.13.1.36.1.10
Control to indicate which state, open or closed, represents the fault condition for this alarm input point. The other state is the cleared condition.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterInputStatus 1.3.6.1.4.1.33.13.1.36.1.11
Indicates the current status of the alarm input point. If the basicAlarmMasterInputValue matches the fault state, then the status is equal to the fault severity. Otherwise the status is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicAlarmMasterInputValue 1.3.6.1.4.1.33.13.1.36.1.12
Indicates the current state of the alarm input point.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterDisplay 1.3.6.1.4.1.33.13.1.36.1.13
Control to toggle the display of the alarm status for this point in the display window of the high density alarm unit.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputZone 1.3.6.1.4.1.33.13.1.36.1.14
The name used to identify the zone where the equipment resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputRelatedEquipment 1.3.6.1.4.1.33.13.1.36.1.15
The name used to identify related equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputSiteId 1.3.6.1.4.1.33.13.1.36.1.16
The name used to identify the site where the unit resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputManufacturer 1.3.6.1.4.1.33.13.1.36.1.17
The name used to identify the manufacturer of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputModel 1.3.6.1.4.1.33.13.1.36.1.18
The model name of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerMasterOutletTable 1.3.6.1.4.1.33.13.1.37
Information about power master outlets.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPowerMasterOutletEntry

basicPowerMasterOutletEntry 1.3.6.1.4.1.33.13.1.37.1
An entry in the basicPowerMasterOutletTable.
OBJECT-TYPE    
  BasicPowerMasterOutletEntry  

basicPowerMasterPortIndex 1.3.6.1.4.1.33.13.1.37.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by the charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPowerMasterOutletIndex 1.3.6.1.4.1.33.13.1.37.1.2
An index which uniquely identifies a power master outlet.
OBJECT-TYPE    
  INTEGER  

basicPowerMasterOutletName 1.3.6.1.4.1.33.13.1.37.1.3
The name used to identify this power master outlet.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerMasterOutletState 1.3.6.1.4.1.33.13.1.37.1.4
Switches the power master outlet on or off. There may be a noticeable time delay while processing a get-request for this object. A response of 'off' to a get-request may indicate that the state is temporarily unavailable.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerMasterOutletAmperageStatus 1.3.6.1.4.1.33.13.1.37.1.5
Indicates the current amperage drawn at this outlet. There may be a noticeable time delay while processing a get-request for this object. A null string indicates that amperage status is temporarily unavailable.
OBJECT-TYPE    
  DisplayString SIZE(0..5)  

basicControlOutputRelayTable 1.3.6.1.4.1.33.13.1.38
Information about controlled output relays.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlOutputRelayEntry

basicControlOutputRelayEntry 1.3.6.1.4.1.33.13.1.38.1
An entry in the basicControlOutputRelayTable.
OBJECT-TYPE    
  BasicControlOutputRelayEntry  

basicControlOutputRelayIndex 1.3.6.1.4.1.33.13.1.38.1.1
An index which uniquely identifies a control output relay.
OBJECT-TYPE    
  INTEGER  

basicControlOutputRelayName 1.3.6.1.4.1.33.13.1.38.1.2
The name used to identify this control output relay.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicControlOutputRelayState 1.3.6.1.4.1.33.13.1.38.1.3
Controls the opening or closing of the control output relay.
OBJECT-TYPE    
  INTEGER open(1), close(2)  

basicControlOutputRelayStatus 1.3.6.1.4.1.33.13.1.38.1.4
Indicates the current status of the control output relay.
OBJECT-TYPE    
  INTEGER open(1), close(2)  

basicAutoProtocolDetectMessage 1.3.6.1.4.1.33.13.1.100
The text string sent as a prompt message out the port at the beginning of auto protocol detection mode. Corresponds to the value labeled 'APD Message' in the SERVER UNIT display.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

xQueue 1.3.6.1.4.1.33.13.2
OBJECT IDENTIFIER    

queueLimit 1.3.6.1.4.1.33.13.2.1
The maximum number of entries that can be made in the Queue table. The value -1 indicates the imit is available memory. Corresponds directly to SERVER QUEUE LIMIT and the value labeled 'Queue Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER -1..100  

queueHigh 1.3.6.1.4.1.33.13.2.2
The highest value of queueNumber since system initialization. Corresponds directly to the value labeled 'Queue Entries' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

queueNumber 1.3.6.1.4.1.33.13.2.3
The number of entries in the Queue table. Corresponds directly to the value labeled 'Queue Entries' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

queueTable 1.3.6.1.4.1.33.13.2.4
A list of queue entries.
OBJECT-TYPE    
  SEQUENCE OF  
    QueueEntry

queueEntry 1.3.6.1.4.1.33.13.2.4.1
Parameter values for a queue entry.
OBJECT-TYPE    
  QueueEntry  

queueJob 1.3.6.1.4.1.33.13.2.4.1.1
The job number of a queued request. Corresponds directly to the value labeled 'Entry' in the QUEUE display.
OBJECT-TYPE    
  INTEGER  

queueStatus 1.3.6.1.4.1.33.13.2.4.1.2
The status of a queue entry. Set to 'invalid' to remove the entry, which corresponds directly to the REMOVE QUEUE ENTRY command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

queueSourceName 1.3.6.1.4.1.33.13.2.4.1.3
The name of the system that originated the queue entry. Corresponds directly to the value labeled 'Source Node' in the QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

queueServiceName 1.3.6.1.4.1.33.13.2.4.1.4
The name of the service for which the originator is waiting. Corresponds directly to the value labeled 'Service' in the QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

queueServicePortIndex 1.3.6.1.4.1.33.13.2.4.1.5
The charPortIndex of the port for which the originator is waiting, if supplied by the originator. As defined in the standard Character MIB. Corresponds indirectly to the port number part of the value labeled 'Port Name' in the QUEUE display.
OBJECT-TYPE    
  INTEGER  

queueServicePortName 1.3.6.1.4.1.33.13.2.4.1.6
The name of the port for which the originator is waiting, if supplied by the originator. Corresponds directly to the port name part of the value labeled 'Port Name' in the SERVER QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

queuePortTable 1.3.6.1.4.1.33.13.2.5
A list of queuing-related character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    QueuePortEntry

queuePortEntry 1.3.6.1.4.1.33.13.2.5.1
Queuing parameter values for a port.
OBJECT-TYPE    
  QueuePortEntry  

queuePortIndex 1.3.6.1.4.1.33.13.2.5.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

queuePortQueuing 1.3.6.1.4.1.33.13.2.5.1.2
Control for allowing queued requests for using the port. Corresponds directly to PORT QUEUING and the presence of the label 'Queuing' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xMenu 1.3.6.1.4.1.33.13.3
OBJECT IDENTIFIER    





















xNetLogin 1.3.6.1.4.1.33.13.4
OBJECT IDENTIFIER    

netLoginNumber 1.3.6.1.4.1.33.13.4.1
The number of entries in the Network Login Server table.
OBJECT-TYPE    
  INTEGER  

netLoginServerTable 1.3.6.1.4.1.33.13.4.2
A list of network login server entries.
OBJECT-TYPE    
  SEQUENCE OF  
    NetLoginServerEntry

netLoginServerEntry 1.3.6.1.4.1.33.13.4.2.1
Network login parameter values for a server entry.
OBJECT-TYPE    
  NetLoginServerEntry  

netLoginServerName 1.3.6.1.4.1.33.13.4.2.1.1
The name of a network login server, suitable for resolution to a network address. Corresponds directly to host portion of SERVER SCRIPT SERVER and the value labeled 'Script Host' in the SERVER PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(1..50)  

netLoginServerStatus 1.3.6.1.4.1.33.13.4.2.1.2
Status of this entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVER SCRIPT SERVER command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

netLoginServerPath 1.3.6.1.4.1.33.13.4.2.1.3
The full path name to the script file that is identified by the user name. Corresponds directly to path portion of SERVER SCRIPT SERVER and the value labeled 'Script Path' in the SERVER PARAMETER SERVER display. Defaults to the NULL string when a new entry is created.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

netLoginServerSeparator 1.3.6.1.4.1.33.13.4.2.1.4
The single character string that will be inserted between the components of a file's path on the script server. Defaults to the NULL string when a new entry is created. Corresponds directly to the separator portion of SERVER SCRIPT SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(0..1)  

netLoginPortTable 1.3.6.1.4.1.33.13.4.3
A list of network login character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    NetLoginPortEntry

netLoginPortEntry 1.3.6.1.4.1.33.13.4.3.1
Network login parameter values for a port.
OBJECT-TYPE    
  NetLoginPortEntry  

netLoginPortIndex 1.3.6.1.4.1.33.13.4.3.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

netLoginPortScriptUse 1.3.6.1.4.1.33.13.4.3.1.2
Control for the script action taken when a user logs in on the port. Corresponds directly to PORT SCRIPT LOGIN and the value labeled 'Script Login:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), required(3)  

netLoginPortScriptEcho 1.3.6.1.4.1.33.13.4.3.1.3
Control for display of script operation on the port when running a script. Corresponds directly to PORT SCRIPT ECHO and the presence of the label 'Script Echo' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

netLoginPortLoaderAddressType 1.3.6.1.4.1.33.13.4.3.1.4
The type of network address contained in netLoginPortLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  AddressType  

netLoginPortLoaderAddress 1.3.6.1.4.1.33.13.4.3.1.5
The network address of the server that provided the script for the current port login. Corresponds directly the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  OCTET STRING  

netLoginPortLoaderFile 1.3.6.1.4.1.33.13.4.3.1.6
The path and file name of the script used for the current port login. Corresponds directly the file name part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  DisplayString  

netLoginPortExecuteFile 1.3.6.1.4.1.33.13.4.3.1.7
The path and file name of a script to be executed immediately on the port. Corresponds directly the file name in the SCRIPT command.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

xDial 1.3.6.1.4.1.33.13.5
OBJECT IDENTIFIER    

dialPortTable 1.3.6.1.4.1.33.13.5.1
A list of dial character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    DialPortEntry

dialPortEntry 1.3.6.1.4.1.33.13.5.1.1
Dial parameter values for a port.
OBJECT-TYPE    
  DialPortEntry  

dialPortIndex 1.3.6.1.4.1.33.13.5.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

dialPortDialback 1.3.6.1.4.1.33.13.5.1.1.2
Control for use of dialback when a user logs in on the port. Corresponds directly to PORT DIALBACK and the presence of the label 'Dialback' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

dialPortDialbackTimeout 1.3.6.1.4.1.33.13.5.1.1.3
The number of seconds to wait for remote modem response when dialing back. Corresponds directly to PORT DIALBACK TIMEOUT and the value labeled 'Dialback Timeout:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 5..60  

dialPortDialout 1.3.6.1.4.1.33.13.5.1.1.4
A control to determine the state of a remote port after it has been logged out from the remote side of the connection. none will log out the port, query will ask user what to do, slip and ppp will revert to those protocols
OBJECT-TYPE    
  INTEGER none(1), query(2), slip(3), ppp(4)  

dialPortDialbackNoUsername 1.3.6.1.4.1.33.13.5.1.1.5
Control which when enabled on a dialback port will not prompt for a username upon dialing back. Instead the original username is reused.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xSessionLog 1.3.6.1.4.1.33.13.6
OBJECT IDENTIFIER    

sessionLogLimit 1.3.6.1.4.1.33.13.6.1
The maximum number of entries allowed in the Session Log table. Corresponds directly to SERVER ACCOUNTING ENTRIES and the value labeled 'Accounting Entries:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogTable 1.3.6.1.4.1.33.13.6.2
A list of session log entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SessionLogEntry

sessionLogEntry 1.3.6.1.4.1.33.13.6.2.1
Parameter values for a session log entry.
OBJECT-TYPE    
  SessionLogEntry  

sessionLogIndex 1.3.6.1.4.1.33.13.6.2.1.1
The index number of a session log entry. Corresponds directly to the order of the displayed records in the SERVER ACCOUNTING display. The maximum value is sessionLogLimit.
OBJECT-TYPE    
  INTEGER  

sessionLogConnectionID 1.3.6.1.4.1.33.13.6.2.1.2
An indentifying number for records relating to the same connection, that is, the connect and disconnect records, either of which can be missing. Corresponds directly to value labeled 'Entry' the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER 1..65535  

sessionLogPort 1.3.6.1.4.1.33.13.6.2.1.3
An index value that uniquely identifies the port where the event took place. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB. Corresponds directly to the value labeled 'Port' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER  

sessionLogEvent 1.3.6.1.4.1.33.13.6.2.1.4
The type of event. Corresponds directly to the alphabetic part of the value labeled 'Type' in the SERVER ACCOUNTING display. Type 15 is used by internal processes that call the session log function with an already formatted message.
OBJECT-TYPE    
  INTEGER login(1), connectLocal(2), connectRemote(3), disconnect(4), rCPConnect(5), rCPDisconnect(6), x25Connect(13), x25Disconnect(14), processDefined(15)  

sessionLogEventDetail 1.3.6.1.4.1.33.13.6.2.1.5
The detailed reason for the event. Corresponds directly to the numeric part of the value labeled 'Type' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER none(1), protocolBadCircuit(2), protocolBadCredits(3), protocolBadStartOrRun(4), protocolBadRange(5), duplicateQueueID(6), noUsers(7), noServiceResourced(8), serviceUserDisconnect(9), serviceUnavailable(10), serverUserDisconnect(11), noNodeResources(12), systemShutdown(13), nodeUserdisconnect(14), badCircuitTimer(15), badServiceClass(16), badMessageOrSlot(17), timeout(18), noProgress(19), serviceNotOnPort(20), noSuchPort(21), badPassword(22), serviceBusy(23), noSuchService(24), serviceDisabled(25), notInQueue(26), noImmeditatAccess(27), accessDenied(28), protocolBadSolicit(29), protocolBadReasonCode(30), unsupportedTest(31), domainTooLong(32), noSuchNode(33), noSuchServiceOnNode(34), rejectService(35), internetConnectDisabled(36)  

sessionLogUserName 1.3.6.1.4.1.33.13.6.2.1.6
The user name logged in on the port when the event occurred. Corresponds directly to the value labeled 'Username' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

sessionLogRemoteName 1.3.6.1.4.1.33.13.6.2.1.7
The name of the session remote partner. Corresponds directly to the value labeled 'Destination' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

sessionLogConnectTime 1.3.6.1.4.1.33.13.6.2.1.8
The date and time that session connection occurred. Corresponds directly to the value labeled 'Connect Time' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DateTime  

sessionLogDisconnectTime 1.3.6.1.4.1.33.13.6.2.1.9
The date and time that session disconnection occurred. Corresponds directly to the value labeled 'Disconnect Time' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DateTime  

sessionLogInCharacters 1.3.6.1.4.1.33.13.6.2.1.10
The number of characters that came into the port for the session. Corresponds directly to the value labeled 'Bytes In' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  Counter  

sessionLogOutCharacters 1.3.6.1.4.1.33.13.6.2.1.11
The number of characters that went out of the port for the session. Corresponds directly to the value labeled 'Bytes Out' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  Counter  

sessionLogVerboseEvent 1.3.6.1.4.1.33.13.6.2.1.12
When logging in 'verbose' mode, the event that occured.
OBJECT-TYPE    
  INTEGER login(1), connectLocal(2), connectRemote(3), disconnect(4), connectRcp(5), disconnectRcp(6), telnetMaint(7), xremote(8), xprinter(9), lpd(12), connectX25(13), disconnectX25(14), userDefined(15)  

sessionLogX25Direction 1.3.6.1.4.1.33.13.6.2.1.13
The initial direction for an X.25 connection. A value of 0 is returned if the session is not X25
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

sessionLogVerboseMessage 1.3.6.1.4.1.33.13.6.2.1.14
Text describing the event that was logged.
OBJECT-TYPE    
  DisplayString  

sessionLogX25CallerAddress 1.3.6.1.4.1.33.13.6.2.1.15
For an X.25 connection, the X.121 source address.
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

sessionLogX25CalledAddress 1.3.6.1.4.1.33.13.6.2.1.16
For an X.25 connection, the X.121 destination address.
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

sessionLogX25DisconnectCause 1.3.6.1.4.1.33.13.6.2.1.17
For a terminated X.25 connection, the standard, X.25 cause code.
OBJECT-TYPE    
  INTEGER  

sessionLogX25DisconnectDiagnostic 1.3.6.1.4.1.33.13.6.2.1.18
For a terminated X.25 connection, the standard, X.25 diagnostic code.
OBJECT-TYPE    
  INTEGER  

sessionLogHostType 1.3.6.1.4.1.33.13.6.3
The type of host to which session log events are to be sent.
OBJECT-TYPE    
  INTEGER none(1), unix(2)  

sessionLogHostAddress 1.3.6.1.4.1.33.13.6.4
The address of the host to receive events.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

sessionLogVerbose 1.3.6.1.4.1.33.13.6.5
Control for verbose logging.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sessionLogPriority 1.3.6.1.4.1.33.13.6.6
The largest priority number for the system to log. Higher numbered (lower priority) events will not be logged.
OBJECT-TYPE    
  INTEGER 0..7  

sessionLogEmpty 1.3.6.1.4.1.33.13.6.7
Control to empty the log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the log to be emptied.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogFacility 1.3.6.1.4.1.33.13.6.8
The UNIX facility level that server originated accounting messages are logged to.
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8), user(9)  

sessionLogReliable 1.3.6.1.4.1.33.13.6.9
Control for reliable logging. Corresponds directly to the presence of the label 'Reliable Accounting' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sessionLogHostSecondaryType 1.3.6.1.4.1.33.13.6.10
The type of secondary host to which session log events are to be sent. This value should be set to unix when configuring a non-zero sessionLogHostSecondaryAddress. Corresponds to the presence of the label 'SYSLOGD Host2' following the label 'Daemon(s)' in the SERVER UNIT display.
OBJECT-TYPE    
  INTEGER none(1), unix(2)  

sessionLogHostSecondaryAddress 1.3.6.1.4.1.33.13.6.11
The address of a secondary host to receive events. Corresponds directly to the value labeled 'SYSLOGD Host2' in the SERVER UNIT display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

sessionLogZeroAccountingAll 1.3.6.1.4.1.33.13.6.12
A control to clear all entries in the accounting log including command log entries. Corresponds directly to the command CLEAR SERVER ACCOUNTING ALL. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogZeroCommandLogging 1.3.6.1.4.1.33.13.6.13
A control to clear all command log entries. Corresponds directly to the command CLEAR SERVER COMMAND LOGGING. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogTl1AutonomousLogSize 1.3.6.1.4.1.33.13.6.14
The size in bytes of the TL1 autonomous log, which records alarms. A change in log size will not take effect until rebooting the unit.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogTl1CommandLogSize 1.3.6.1.4.1.33.13.6.15
The size in bytes of the TL1 command log, which records all TL1 commands entered on this server. A change in log size will not take effect until rebooting the unit.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogZeroDataLogging 1.3.6.1.4.1.33.13.6.16
A control to clear all data log entries. Corresponds directly to the command CLEAR SERVER DATA LOGGING. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogZeroAlarmLogging 1.3.6.1.4.1.33.13.6.17
Control to clear all alarm log entries. In response to a get-request or a get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

xCcl 1.3.6.1.4.1.33.13.7
OBJECT IDENTIFIER    

cclParsedScriptTable 1.3.6.1.4.1.33.13.7.1
A list of parsed CCL scripts.
OBJECT-TYPE    
  SEQUENCE OF  
    CclParsedScriptEntry

cclParsedScriptEntry 1.3.6.1.4.1.33.13.7.1.1
Parsed CCL script information.
OBJECT-TYPE    
  CclParsedScriptEntry  

cclScriptName 1.3.6.1.4.1.33.13.7.1.1.1
The name of a CCL script file that has been loaded from a script server. Corresponds directly to the name in a SERVER CCL command and the value labeled 'CCL name:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

cclScriptControl 1.3.6.1.4.1.33.13.7.1.1.2
Control for maintaining the CCL script. The refresh action consists of retrieving the script by name from a script server and parsing it into an executable format. This may be used to add an entry to the table or refresh an existing entry with a new version of the CCL script from the server. This command may take ten seconds or more to complete and may fail if the script file cannot be retrieved or an error is encountered in parsing the CCL script. An error value of genErr is returned upon refresh failure. The refresh action corresponds directly to the commnd: REFRESH SERVER CCL. Setting this field to delete causes a script that is NOT being referenced by any ports to be removed from the list and its memory freed. This action corresponds directly to the command: DELETE SERVER CCL. An error value of badValue is returned upon delete failure.
OBJECT-TYPE    
  INTEGER refresh(1), delete(2)  

cclPortTable 1.3.6.1.4.1.33.13.7.2
A list of ccl character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CclPortEntry

cclPortEntry 1.3.6.1.4.1.33.13.7.2.1
CCL parameter values for a port.
OBJECT-TYPE    
  CclPortEntry  

cclPortCclName 1.3.6.1.4.1.33.13.7.2.1.1
The name of the ARAP modem CCL script file.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

cclPortModemAudible 1.3.6.1.4.1.33.13.7.2.1.2
This boolean indicates if the CCL script should put the modem into audible mode.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xBroadcastGroup 1.3.6.1.4.1.33.13.8
OBJECT IDENTIFIER    

broadcastGroupTable 1.3.6.1.4.1.33.13.8.1
A list of broadcast groups.
OBJECT-TYPE    
  SEQUENCE OF  
    BroadcastGroupEntry

broadcastGroupEntry 1.3.6.1.4.1.33.13.8.1.1
Broadcast group information.
OBJECT-TYPE    
  BroadcastGroupEntry  

broadcastGroupIndex 1.3.6.1.4.1.33.13.8.1.1.1
An index value that uniquely identifies a broadcast group.
OBJECT-TYPE    
  INTEGER 1..10  

broadcastGroupStatus 1.3.6.1.4.1.33.13.8.1.1.2
A status value for the broadcast group. The value 'enabled' means that the group is active and broadcasting data whereas 'disabled' means that the group is not active.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

broadcastGroupMaster 1.3.6.1.4.1.33.13.8.1.1.3
An index value that uniquely identifies the Master Broadcast Port for this group. The port provided in this object is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

broadcastGroupSlaves 1.3.6.1.4.1.33.13.8.1.1.4
A bitmap representing the ports included in this broadcast group. A bit with a value of '1' means the corresponding port is included in the broadcast group whereas a value of '0' indicates that the port is not part of the broadcast group.
OBJECT-TYPE    
  OCTET STRING  

broadcastGroupSlavesBroadcastOnly 1.3.6.1.4.1.33.13.8.1.1.5
A bitmap representing the ports set up to discard input data and transmit only the broadcast data on the line. A bit set to '1' means that the corresponding port will only broadcast the data and discard any input.
OBJECT-TYPE    
  OCTET STRING  

broadcastGroupSlaveTcpPort 1.3.6.1.4.1.33.13.8.1.1.6
A TCP port number on which the broadcast group process will listen for incoming TCP connections. A client connected to this particular port will receive the data broadcast by the Master Port. A value of '0' indicates that no TCP port is defined.
OBJECT-TYPE    
  INTEGER 0..65554  

broadcastGroupSlaveTcpBroadcastOnly 1.3.6.1.4.1.33.13.8.1.1.7
Specifies whether the TCP port will discard input characters for the Master port so that the Master port operates in broadcast only mode.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPingHosts 1.3.6.1.4.1.33.13.9
OBJECT IDENTIFIER    

pingHostsTable 1.3.6.1.4.1.33.13.9.1
A list of ICMP ping hosts.
OBJECT-TYPE    
  SEQUENCE OF  
    PingHostsEntry

pingHostsEntry 1.3.6.1.4.1.33.13.9.1.1
Ping Hosts information.
OBJECT-TYPE    
  PingHostsEntry  

icmpPingHostIndex 1.3.6.1.4.1.33.13.9.1.1.1
An index value that uniquely identifies a ping host.
OBJECT-TYPE    
  INTEGER 1..24  

icmpPingHostAddress 1.3.6.1.4.1.33.13.9.1.1.2
The host address to be monitored to make sure it is reachable using ICMP pings. This address must be unique within the table, and must be Set to a non-zero value prior to configuring the other attributes of the ping host. A set-request with an IpAddress of zero will make this entry inactive.
OBJECT-TYPE    
  IpAddress  

icmpPingHostDescription 1.3.6.1.4.1.33.13.9.1.1.3
This is an optional description of the ping host.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

icmpPingHostNotificationType 1.3.6.1.4.1.33.13.9.1.1.4
Indicates the type of notification used, if any, when the ping host is determined to be unreachable. If the type is snmp, a trap is sent to configured trap clients.
OBJECT-TYPE    
  INTEGER none(1), snmp(2)  

icmpPingHostPollingInterval 1.3.6.1.4.1.33.13.9.1.1.5
The time in seconds between sending an ICMP ping to a ping host in order to check for reachability.
OBJECT-TYPE    
  INTEGER 5..65535  

icmpPingHostMaximumRetries 1.3.6.1.4.1.33.13.9.1.1.6
The maximum consecutive failed attempts to reach the host via ICMP ping before sending notification as specified by icmpPingHostNotificationType.
OBJECT-TYPE    
  INTEGER 1..255  

icmpPingHostTrapSeverityLevel 1.3.6.1.4.1.33.13.9.1.1.7
Indicates the severity level of a trap to be sent out when the host is unreachable.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

icmpPingHostStatus 1.3.6.1.4.1.33.13.9.1.1.8
Indicates the current status of the ping host. If the host is reachable, the status is cleared. Otherwise, it is the same as the icmpPingHostTrapSeverityLevel.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

contactClosureChanged 1.3.6.1.4.1.33.30
Indication that the contact closure transitioned to open or closed.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

powerAlarmFuseBankA 1.3.6.1.4.1.33.31
Indicates that a fuse from bank A tripped its breaker, or that it went operational. However, it is unlikely that a trap would be issued when the fuse starts working.
TRAP-TYPE    
  basicPowerStatusFuseA  
  sysLocation  

powerAlarmFuseBankB 1.3.6.1.4.1.33.32
Indicates that a fuse from bank B tripped its breaker, or that it went operational. However, it is unlikely that a trap would be issued when the fuse starts working.
TRAP-TYPE    
  basicPowerStatusFuseB  
  sysLocation  

powerSupplyAlarmA 1.3.6.1.4.1.33.33
Indicates that power supply A lost or regained power. However, it is unlikely that a trap would be issued when the power comes on.
TRAP-TYPE    
  basicPowerSupplyStatusA  
  sysLocation  

powerSupplyAlarmB 1.3.6.1.4.1.33.34
Indicates that power supply B lost or regained power. However, it is unlikely that a trap would be issued when the power comes on.
TRAP-TYPE    
  basicPowerSupplyStatusB  
  sysLocation  

portInputSignalChange 1.3.6.1.4.1.33.35
Indicates that an input signal on a port has transitioned to the state indicated in the variable rs232InSigState.
TRAP-TYPE    
  rs232InSigState  
  sysLocation  
  rs232PortIndex  

portOutputSignalChange 1.3.6.1.4.1.33.36
Indicates that an output signal on a port has transitioned to the state indicated in the variable rs232OutSigState.
TRAP-TYPE    
  rs232OutSigState  
  sysLocation  
  rs232PortIndex  

humidityThresholdExceeded 1.3.6.1.4.1.33.37
Indication that the humidity exceeded a threshhold and the value of the currrent humidity.
TRAP-TYPE    
  basicHumidityValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicHumiditySensorIndex  
  basicHumidityAlarmStatus  

temperatureThresholdExceeded 1.3.6.1.4.1.33.38
Indication that the temperature exceeded a threshhold and the value of the currrent temperature.
TRAP-TYPE    
  basicTemperatureValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicTemperatureSensorIndex  
  basicTemperatureAlarmStatus  

alarmMasterNotResponding 1.3.6.1.4.1.33.39
Indication that the high density alarm management device lost or regained contact with the inReach port to which it was connected as indicated by the basicPortAlarmMasterStatus variable.
TRAP-TYPE    
  basicPortIndex  
  sysLocation  
  basicPortAlarmMasterStatus  

alarmMasterInputStateChange 1.3.6.1.4.1.33.41
Indication that the alarm input point within a high density alarm management port transitioned to open or closed.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  

asciiToTrapTranslation 1.3.6.1.4.1.33.42
This trap contains ASCII data, which arrived at serial port, was formatted as a trap, and sent out on the network.
TRAP-TYPE    
  basicPortAsciiToTrapTranslationTrapSeverity  
  basicPortAsciiToTrapTranslationLastMessage  

powerMasterNotResponding 1.3.6.1.4.1.33.43
Indication that the power management port lost or regained contact with the power unit to which it was connected as indicated by the basicPortPowerMasterDeviceStatus variable.
TRAP-TYPE    
  basicPortIndex  
  sysLocation  
  basicPortPowerMasterDeviceStatus  

temperatureNormal 1.3.6.1.4.1.33.44
Indication that the temperature returned within bounds, and the value of the currrent temperature.
TRAP-TYPE    
  basicTemperatureValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicTemperatureSensorIndex  
  basicTemperatureAlarmStatus  

humidityNormal 1.3.6.1.4.1.33.45
Indication that the humidity returned within bounds, and the currrent humidity reading.
TRAP-TYPE    
  basicHumidityValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicHumiditySensorIndex  
  basicHumidityAlarmStatus  

alarmMasterSideAOff 1.3.6.1.4.1.33.46
Indication that side A powered off in the attached IR7104 alarm unit due to DC rail fluctuations.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideBOff 1.3.6.1.4.1.33.47
Indication that side B powered off in the attached IR7104 alarm unit due to DC rail fluctuations.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideAOn 1.3.6.1.4.1.33.48
Indication that side A powered on in the attached IR7104 alarm unit after previous power off.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideBOn 1.3.6.1.4.1.33.49
Indication that side B powered on in the attached IR7104 alarm unit after previous power off.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

icmpPingHostNotReachable 1.3.6.1.4.1.33.50
Indication that the icmp Ping Host is not reachable after polling for icmpPingHostMaximumRetries.
TRAP-TYPE    
  icmpPingHostAddress  
  icmpPingHostDescription  
  sysLocation  
  icmpPingHostPollingInterval  
  icmpPingHostMaximumRetries  
  icmpPingHostStatus  

icmpPingHostResponding 1.3.6.1.4.1.33.51
Indication that the icmp Ping Host is reachable again after a failure.
TRAP-TYPE    
  icmpPingHostAddress  
  icmpPingHostDescription  
  sysLocation  
  icmpPingHostPollingInterval  
  icmpPingHostMaximumRetries  
  icmpPingHostStatus  

alarmInputLowDensity0001Alarm 1.3.6.1.4.1.33.10001
Generated when alarm point 1 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0002Alarm 1.3.6.1.4.1.33.10002
Generated when alarm point 2 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0003Alarm 1.3.6.1.4.1.33.10003
Generated when alarm point 3 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0004Alarm 1.3.6.1.4.1.33.10004
Generated when alarm point 4 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0005Alarm 1.3.6.1.4.1.33.10005
Generated when alarm point 5 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0006Alarm 1.3.6.1.4.1.33.10006
Generated when alarm point 6 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0007Alarm 1.3.6.1.4.1.33.10007
Generated when alarm point 7 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0008Alarm 1.3.6.1.4.1.33.10008
Generated when alarm point 8 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0009Alarm 1.3.6.1.4.1.33.10009
Generated when alarm point 9 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0010Alarm 1.3.6.1.4.1.33.10010
Generated when alarm point 10 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0011Alarm 1.3.6.1.4.1.33.10011
Generated when alarm point 11 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0012Alarm 1.3.6.1.4.1.33.10012
Generated when alarm point 12 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0013Alarm 1.3.6.1.4.1.33.10013
Generated when alarm point 13 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0014Alarm 1.3.6.1.4.1.33.10014
Generated when alarm point 14 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0015Alarm 1.3.6.1.4.1.33.10015
Generated when alarm point 15 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0016Alarm 1.3.6.1.4.1.33.10016
Generated when alarm point 16 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0017Alarm 1.3.6.1.4.1.33.10017
Generated when alarm point 17 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0018Alarm 1.3.6.1.4.1.33.10018
Generated when alarm point 18 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0019Alarm 1.3.6.1.4.1.33.10019
Generated when alarm point 19 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0020Alarm 1.3.6.1.4.1.33.10020
Generated when alarm point 20 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0021Alarm 1.3.6.1.4.1.33.10021
Generated when alarm point 21 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0022Alarm 1.3.6.1.4.1.33.10022
Generated when alarm point 22 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0023Alarm 1.3.6.1.4.1.33.10023
Generated when alarm point 23 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0024Alarm 1.3.6.1.4.1.33.10024
Generated when alarm point 24 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0025Alarm 1.3.6.1.4.1.33.10025
Generated when alarm point 25 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0026Alarm 1.3.6.1.4.1.33.10026
Generated when alarm point 26 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0027Alarm 1.3.6.1.4.1.33.10027
Generated when alarm point 27 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0028Alarm 1.3.6.1.4.1.33.10028
Generated when alarm point 28 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0029Alarm 1.3.6.1.4.1.33.10029
Generated when alarm point 29 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0030Alarm 1.3.6.1.4.1.33.10030
Generated when alarm point 30 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0031Alarm 1.3.6.1.4.1.33.10031
Generated when alarm point 31 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0032Alarm 1.3.6.1.4.1.33.10032
Generated when alarm point 32 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0033Alarm 1.3.6.1.4.1.33.10033
Generated when alarm point 33 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0034Alarm 1.3.6.1.4.1.33.10034
Generated when alarm point 34 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0035Alarm 1.3.6.1.4.1.33.10035
Generated when alarm point 35 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0036Alarm 1.3.6.1.4.1.33.10036
Generated when alarm point 36 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0037Alarm 1.3.6.1.4.1.33.10037
Generated when alarm point 37 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0038Alarm 1.3.6.1.4.1.33.10038
Generated when alarm point 38 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0039Alarm 1.3.6.1.4.1.33.10039
Generated when alarm point 39 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0040Alarm 1.3.6.1.4.1.33.10040
Generated when alarm point 40 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0041Alarm 1.3.6.1.4.1.33.10041
Generated when alarm point 41 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0042Alarm 1.3.6.1.4.1.33.10042
Generated when alarm point 42 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0043Alarm 1.3.6.1.4.1.33.10043
Generated when alarm point 43 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0044Alarm 1.3.6.1.4.1.33.10044
Generated when alarm point 44 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0045Alarm 1.3.6.1.4.1.33.10045
Generated when alarm point 45 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0046Alarm 1.3.6.1.4.1.33.10046
Generated when alarm point 46 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0047Alarm 1.3.6.1.4.1.33.10047
Generated when alarm point 47 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0048Alarm 1.3.6.1.4.1.33.10048
Generated when alarm point 48 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0049Alarm 1.3.6.1.4.1.33.10049
Generated when alarm point 49 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0050Alarm 1.3.6.1.4.1.33.10050
Generated when alarm point 50 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0051Alarm 1.3.6.1.4.1.33.10051
Generated when alarm point 51 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0052Alarm 1.3.6.1.4.1.33.10052
Generated when alarm point 52 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0053Alarm 1.3.6.1.4.1.33.10053
Generated when alarm point 53 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0054Alarm 1.3.6.1.4.1.33.10054
Generated when alarm point 54 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0055Alarm 1.3.6.1.4.1.33.10055
Generated when alarm point 55 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0056Alarm 1.3.6.1.4.1.33.10056
Generated when alarm point 56 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0057Alarm 1.3.6.1.4.1.33.10057
Generated when alarm point 57 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0058Alarm 1.3.6.1.4.1.33.10058
Generated when alarm point 58 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0059Alarm 1.3.6.1.4.1.33.10059
Generated when alarm point 59 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0060Alarm 1.3.6.1.4.1.33.10060
Generated when alarm point 60 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0061Alarm 1.3.6.1.4.1.33.10061
Generated when alarm point 61 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0062Alarm 1.3.6.1.4.1.33.10062
Generated when alarm point 62 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0063Alarm 1.3.6.1.4.1.33.10063
Generated when alarm point 63 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0064Alarm 1.3.6.1.4.1.33.10064
Generated when alarm point 64 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0065Alarm 1.3.6.1.4.1.33.10065
Generated when alarm point 65 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0066Alarm 1.3.6.1.4.1.33.10066
Generated when alarm point 66 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0067Alarm 1.3.6.1.4.1.33.10067
Generated when alarm point 67 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0068Alarm 1.3.6.1.4.1.33.10068
Generated when alarm point 68 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0069Alarm 1.3.6.1.4.1.33.10069
Generated when alarm point 69 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0070Alarm 1.3.6.1.4.1.33.10070
Generated when alarm point 70 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0071Alarm 1.3.6.1.4.1.33.10071
Generated when alarm point 71 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0072Alarm 1.3.6.1.4.1.33.10072
Generated when alarm point 72 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0073Alarm 1.3.6.1.4.1.33.10073
Generated when alarm point 73 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0074Alarm 1.3.6.1.4.1.33.10074
Generated when alarm point 74 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0075Alarm 1.3.6.1.4.1.33.10075
Generated when alarm point 75 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0076Alarm 1.3.6.1.4.1.33.10076
Generated when alarm point 76 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0077Alarm 1.3.6.1.4.1.33.10077
Generated when alarm point 77 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0078Alarm 1.3.6.1.4.1.33.10078
Generated when alarm point 78 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0079Alarm 1.3.6.1.4.1.33.10079
Generated when alarm point 79 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0080Alarm 1.3.6.1.4.1.33.10080
Generated when alarm point 80 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0001Normal 1.3.6.1.4.1.33.20001
Generated when alarm point 1 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0002Normal 1.3.6.1.4.1.33.20002
Generated when alarm point 2 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0003Normal 1.3.6.1.4.1.33.20003
Generated when alarm point 3 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0004Normal 1.3.6.1.4.1.33.20004
Generated when alarm point 4 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0005Normal 1.3.6.1.4.1.33.20005
Generated when alarm point 5 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0006Normal 1.3.6.1.4.1.33.20006
Generated when alarm point 6 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0007Normal 1.3.6.1.4.1.33.20007
Generated when alarm point 7 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0008Normal 1.3.6.1.4.1.33.20008
Generated when alarm point 8 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0009Normal 1.3.6.1.4.1.33.20009
Generated when alarm point 9 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0010Normal 1.3.6.1.4.1.33.20010
Generated when alarm point 10 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0011Normal 1.3.6.1.4.1.33.20011
Generated when alarm point 11 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0012Normal 1.3.6.1.4.1.33.20012
Generated when alarm point 12 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0013Normal 1.3.6.1.4.1.33.20013
Generated when alarm point 13 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0014Normal 1.3.6.1.4.1.33.20014
Generated when alarm point 14 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0015Normal 1.3.6.1.4.1.33.20015
Generated when alarm point 15 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0016Normal 1.3.6.1.4.1.33.20016
Generated when alarm point 16 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0017Normal 1.3.6.1.4.1.33.20017
Generated when alarm point 17 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0018Normal 1.3.6.1.4.1.33.20018
Generated when alarm point 18 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0019Normal 1.3.6.1.4.1.33.20019
Generated when alarm point 19 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0020Normal 1.3.6.1.4.1.33.20020
Generated when alarm point 20 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0021Normal 1.3.6.1.4.1.33.20021
Generated when alarm point 21 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0022Normal 1.3.6.1.4.1.33.20022
Generated when alarm point 22 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0023Normal 1.3.6.1.4.1.33.20023
Generated when alarm point 23 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0024Normal 1.3.6.1.4.1.33.20024
Generated when alarm point 24 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0025Normal 1.3.6.1.4.1.33.20025
Generated when alarm point 25 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0026Normal 1.3.6.1.4.1.33.20026
Generated when alarm point 26 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0027Normal 1.3.6.1.4.1.33.20027
Generated when alarm point 27 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0028Normal 1.3.6.1.4.1.33.20028
Generated when alarm point 28 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0029Normal 1.3.6.1.4.1.33.20029
Generated when alarm point 29 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0030Normal 1.3.6.1.4.1.33.20030
Generated when alarm point 30 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0031Normal 1.3.6.1.4.1.33.20031
Generated when alarm point 31 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0032Normal 1.3.6.1.4.1.33.20032
Generated when alarm point 32 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0033Normal 1.3.6.1.4.1.33.20033
Generated when alarm point 33 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0034Normal 1.3.6.1.4.1.33.20034
Generated when alarm point 34 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0035Normal 1.3.6.1.4.1.33.20035
Generated when alarm point 35 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0036Normal 1.3.6.1.4.1.33.20036
Generated when alarm point 36 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0037Normal 1.3.6.1.4.1.33.20037
Generated when alarm point 37 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0038Normal 1.3.6.1.4.1.33.20038
Generated when alarm point 38 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0039Normal 1.3.6.1.4.1.33.20039
Generated when alarm point 39 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0040Normal 1.3.6.1.4.1.33.20040
Generated when alarm point 40 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0041Normal 1.3.6.1.4.1.33.20041
Generated when alarm point 41 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0042Normal 1.3.6.1.4.1.33.20042
Generated when alarm point 42 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0043Normal 1.3.6.1.4.1.33.20043
Generated when alarm point 43 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0044Normal 1.3.6.1.4.1.33.20044
Generated when alarm point 44 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0045Normal 1.3.6.1.4.1.33.20045
Generated when alarm point 45 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0046Normal 1.3.6.1.4.1.33.20046
Generated when alarm point 46 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0047Normal 1.3.6.1.4.1.33.20047
Generated when alarm point 47 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0048Normal 1.3.6.1.4.1.33.20048
Generated when alarm point 48 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0049Normal 1.3.6.1.4.1.33.20049
Generated when alarm point 49 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0050Normal 1.3.6.1.4.1.33.20050
Generated when alarm point 50 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0051Normal 1.3.6.1.4.1.33.20051
Generated when alarm point 51 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0052Normal 1.3.6.1.4.1.33.20052
Generated when alarm point 52 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0053Normal 1.3.6.1.4.1.33.20053
Generated when alarm point 53 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0054Normal 1.3.6.1.4.1.33.20054
Generated when alarm point 54 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0055Normal 1.3.6.1.4.1.33.20055
Generated when alarm point 55 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0056Normal 1.3.6.1.4.1.33.20056
Generated when alarm point 56 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0057Normal 1.3.6.1.4.1.33.20057
Generated when alarm point 57 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0058Normal 1.3.6.1.4.1.33.20058
Generated when alarm point 58 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0059Normal 1.3.6.1.4.1.33.20059
Generated when alarm point 59 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0060Normal 1.3.6.1.4.1.33.20060
Generated when alarm point 60 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0061Normal 1.3.6.1.4.1.33.20061
Generated when alarm point 61 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0062Normal 1.3.6.1.4.1.33.20062
Generated when alarm point 62 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0063Normal 1.3.6.1.4.1.33.20063
Generated when alarm point 63 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0064Normal 1.3.6.1.4.1.33.20064
Generated when alarm point 64 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0065Normal 1.3.6.1.4.1.33.20065
Generated when alarm point 65 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0066Normal 1.3.6.1.4.1.33.20066
Generated when alarm point 66 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0067Normal 1.3.6.1.4.1.33.20067
Generated when alarm point 67 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0068Normal 1.3.6.1.4.1.33.20068
Generated when alarm point 68 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0069Normal 1.3.6.1.4.1.33.20069
Generated when alarm point 69 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0070Normal 1.3.6.1.4.1.33.20070
Generated when alarm point 70 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0071Normal 1.3.6.1.4.1.33.20071
Generated when alarm point 71 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0072Normal 1.3.6.1.4.1.33.20072
Generated when alarm point 72 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0073Normal 1.3.6.1.4.1.33.20073
Generated when alarm point 73 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0074Normal 1.3.6.1.4.1.33.20074
Generated when alarm point 74 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0075Normal 1.3.6.1.4.1.33.20075
Generated when alarm point 75 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0076Normal 1.3.6.1.4.1.33.20076
Generated when alarm point 76 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0077Normal 1.3.6.1.4.1.33.20077
Generated when alarm point 77 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0078Normal 1.3.6.1.4.1.33.20078
Generated when alarm point 78 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0079Normal 1.3.6.1.4.1.33.20079
Generated when alarm point 79 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0080Normal 1.3.6.1.4.1.33.20080
Generated when alarm point 80 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

Defined Objects

BasicPortEntry  
SEQUENCE    
  INTEGER as basicPortIndex  
  INTEGER as basicPortDefaultDestAction  
  INTEGER as basicPortDefaultDestProtocol  
  DisplayString as basicPortDefaultDestName  
  DisplayString as basicPortDefaultDestLATNodeName  
  DisplayString as basicPortDefaultDestLATPortName  
  INTEGER as basicPortAutoConnect  
  INTEGER as basicPortAutoLogin  
  INTEGER as basicPortBroadcast  
  INTEGER as basicPortConnectResume  
  INTEGER as basicPortDialup  
  INTEGER as basicPortIdleTimeout  
  INTEGER as basicPortInactivityLogout  
  INTEGER as basicPortLossNotification  
  INTEGER as basicPortMessageCodes  
  INTEGER as basicPortMultisessions  
  DisplayString as basicPortDefaultUserName  
  INTEGER as basicPortVerification  
  INTEGER as basicPortDefaultProtocol  
  Counter as basicPortLogins  
  Counter as basicPortRemoteSessions  
  Counter as basicPortIdleTimeouts  
  INTEGER as basicPortStatus  
  INTEGER as basicPortLastInCharacter  
  INTEGER as basicPortLastOutCharacter  
  DisplayString as basicPortActiveUserName  
  INTEGER as basicPortDefaultSessionMode  
  INTEGER as basicPortZero  
  TimeTicks as basicPortZeroTime  
  INTEGER as basicPortUnixCommands  
  INTEGER as basicPortSessionMode  
  INTEGER as basicPortRemoteDisconnectNotify  
  INTEGER as basicPortDefaultDestControlled  
  OCTET STRING as basicPortControlledPortLogin  
  OCTET STRING as basicPortControlledPortLogout  
  OCTET STRING as basicPortControlledSessionInitialize  
  OCTET STRING as basicPortControlledSessionTerminate  
  INTEGER as basicPortRloginTransparentMode  
  INTEGER as basicPortLoginDuration  
  INTEGER as basicPortOutboundSecurity  
  INTEGER as basicPortXonTimer  
  INTEGER as basicPortDefaultDedicatedSessionType  
  INTEGER as basicPortIdleTimeReceive  
  INTEGER as basicPortIdleTimeTransmit  
  INTEGER as basicPortZeroDisconnectSession  
  INTEGER as basicPortConsolePort  
  DisplayString as basicPortLoginPassword  
  INTEGER as basicPortSensor  
  INTEGER as basicPortAlarmControl  
  INTEGER as basicPortCommandLogging  
  OCTET STRING as basicPortBreakSequence  
  INTEGER as basicPortTl1Mode  
  INTEGER as basicPortTl1Console  
  INTEGER as basicPortFallThrough  
  INTEGER as basicPortCommandLoggingSuppressControlCharacters  
  INTEGER as basicPortDataLogging  
  INTEGER as basicPortDataLoggingSuppressControlCharacters  
  INTEGER as basicPortOnboardSecurity  
  INTEGER as basicPortFallBack  
  INTEGER as basicPortAlarmMaster  
  INTEGER as basicPortAlarmMasterAccounting  
  INTEGER as basicPortAlarmMasterAudibleAlarm  
  INTEGER as basicPortAlarmMasterFixTime  
  DisplayString as basicPortAlarmMasterLcdDisplayString  
  INTEGER as basicPortAlarmMasterReboot  
  IpAddress as basicPortAlarmMasterUpdateFirmwareHost  
  DisplayString as basicPortAlarmMasterUpdateFirmwareFileName  
  INTEGER as basicPortAlarmMasterUpdateFirmware  
  INTEGER as basicPortAlarmMasterStatus  
  INTEGER as basicPortAlarmMasterFaultSeverity  
  INTEGER as basicPortPowerMaster  
  INTEGER as basicPortPowerMasterTimeDelay  
  INTEGER as basicPortPowerMasterSwitch  
  DisplayString as basicPortPowerMasterModel  
  DisplayString as basicPortPowerMasterSerialNumber  
  DisplayString as basicPortPowerMasterFirmware  
  INTEGER as basicPortLockout  
  INTEGER as basicPortAsciiToTrapTranslation  
  INTEGER as basicPortAsciiToTrapTranslationTrapSeverity  
  Counter as basicPortAsciiToTrapTranslationMessages  
  DisplayString as basicPortAsciiToTrapTranslationLastMessage  
  INTEGER as basicPortPowerMasterAlarmSeverity  
  INTEGER as basicPortPowerMasterDeviceStatus  
  INTEGER as basicPortBuffering  
  INTEGER as basicPortLogFacilityLevel  
  INTEGER as basicPortPppDialBackup  
  DisplayString as basicPortPppDialBackupNumber  
  INTEGER as basicPortPppDialBackupRedialTimer  
  INTEGER as basicPortPppDialBackupRedialRetries  
  INTEGER as basicPortPppDialBackupDisconnectTimer  
  IpAddress as basicPortPppDialBackupLocalAddress  
  IpAddress as basicPortPppDialBackupDestinationAddress  
  INTEGER as basicPortPppDialBackupAddresses  

BasicSerialPortEntry  
SEQUENCE    
  INTEGER as basicSerialPortIndex  
  INTEGER as basicSerialPortBreak  
  INTEGER as basicSerialPortInterrupts  
  INTEGER as basicSerialPortNoLoss  
  INTEGER as basicSerialPortPause  
  DisplayString as basicSerialPortPrompt  
  INTEGER as basicSerialPortTerminalType  
  INTEGER as basicSerialPortTypeaheadLimit  
  INTEGER as basicSerialPortBackwardSwitch  
  INTEGER as basicSerialPortForwardSwitch  
  INTEGER as basicSerialPortLocalSwitch  
  INTEGER as basicSerialPortModemControl  
  INTEGER as basicSerialPortSignalCheck  
  INTEGER as basicSerialPortDSRLogout  
  INTEGER as basicSerialPortDSRObserve  
  INTEGER as basicSerialPortDCDTimeout  
  INTEGER as basicSerialPortDTRAssert  
  INTEGER as basicSerialPortLimitedCommands  
  INTEGER as basicSerialPortLimitedView  
  INTEGER as basicSerialPortPassword  
  INTEGER as basicSerialPortLineEditor  
  INTEGER as basicSerialPortLineEditorBackspace  
  INTEGER as basicSerialPortLineEditorBeginning  
  INTEGER as basicSerialPortLineEditorCancel  
  INTEGER as basicSerialPortLineEditorDeleteBeginning  
  INTEGER as basicSerialPortLineEditorDeleteLine  
  INTEGER as basicSerialPortLineEditorEnd  
  INTEGER as basicSerialPortLineEditorForward  
  INTEGER as basicSerialPortLineEditorInsertToggle  
  INTEGER as basicSerialPortLineEditorNextLine  
  INTEGER as basicSerialPortLineEditorPreviousLine  
  INTEGER as basicSerialPortLineEditorQuotingCharacter  
  INTEGER as basicSerialPortLineEditorRedisplay  
  INTEGER as basicSerialPortQuadartReceiveDiscard  
  OCTET STRING as basicSerialPortAPDProtocols  
  INTEGER as basicSerialPortAPDTimeout  
  OCTET STRING as basicSerialPortAPDDefaultProtocol  
  INTEGER as basicSerialPortUsernameCharSet  
  INTEGER as basicSerialPortAutoHangup  
  INTEGER as basicSerialPortCommandSize  
  INTEGER as basicSerialPortAutoProtocolDetectPrompt  
  DisplayString as basicSerialPortUsernamePrompt  
  DisplayString as basicSerialPortPasswordPrompt  
  INTEGER as basicSerialPortAutoProtocolDetectSecurityInteractiveOnly  
  DisplayString as basicSerialPortDedicatedUserData  
  INTEGER as basicSerialPortIpAutoDiscovery  
  DisplayString as basicSerialPortDedicatedKickStartData  
  INTEGER as basicSerialPortBreakLength  
  INTEGER as basicSerialPortRotaryRoundRobin  
  INTEGER as basicSerialPortWelcomeBeforeAuthentication  
  INTEGER as basicSerialPortGatewayAutoDiscovery  
  INTEGER as basicSerialPortSubnetAutoDiscovery  
  INTEGER as basicSerialPortRaiseLowerDtr  
  INTEGER as basicSerialPortRaiseControlDtr  
  INTEGER as basicSerialPortIpConfigureBootp  

BasicPortSessEntry  
SEQUENCE    
  INTEGER as basicPortPortIndex  
  INTEGER as basicPortSessIndex  
  INTEGER as basicSessControlled  

BasicContactClosureOrAlarmInputEntry  
SEQUENCE    
  INTEGER as basicContactClosureOrAlarmInputValue  
  DisplayString as basicContactClosureOrAlarmInputName  
  INTEGER as basicContactClosureOrAlarmInputTrapEnable  
  INTEGER as basicContactClosureOrAlarmInputFaultSeverity  
  INTEGER as basicContactClosureOrAlarmInputFaultState  
  INTEGER as basicContactClosureOrAlarmInputStatus  
  DisplayString as basicContactClosureOrAlarmInputZone  
  DisplayString as basicContactClosureOrAlarmInputRelatedEquipment  
  DisplayString as basicContactClosureOrAlarmInputSiteId  
  INTEGER as basicContactClosureOrAlarmInputIndex  
  DisplayString as basicContactClosureOrAlarmInputManufacturer  
  DisplayString as basicContactClosureOrAlarmInputModel  

BasicPowerOutletEntry  
SEQUENCE    
  INTEGER as basicPowerOutletOnOff  
  INTEGER as basicPowerOutletReboot  
  DisplayString as basicPowerOutletName  
  INTEGER as basicPowerOutletRedundant  
  DisplayString as basicPowerOutletConsoleName  
  INTEGER as basicPowerOutletHighCurrent  
  INTEGER as basicPowerOutletIndex  

BasicTemperatureSensorEntry  
SEQUENCE    
  INTEGER as basicTempTrapHighThreshold  
  INTEGER as basicTempTrapLowThreshold  
  INTEGER as basicTemperatureSensor  
  INTEGER as basicTemperatureValue  
  INTEGER as basicTemperatureAlarmSeverity  
  INTEGER as basicTemperatureAlarmStatus  
  DisplayString as basicTemperatureHumiditySensorName  
  INTEGER as basicTemperatureSensorIndex  

BasicHumiditySensorEntry  
SEQUENCE    
  INTEGER as basicHumidityTrapHighThreshold  
  INTEGER as basicHumidityTrapLowThreshold  
  INTEGER as basicHumiditySensor  
  INTEGER as basicHumidityValue  
  INTEGER as basicHumidityAlarmSeverity  
  INTEGER as basicHumidityAlarmStatus  
  INTEGER as basicHumiditySensorIndex  

BasicControlSignalEntry  
SEQUENCE    
  INTEGER as basicControlSignalValue  
  INTEGER as basicControlSignalIndex  

BasicControlOutputEntry  
SEQUENCE    
  INTEGER as basicControlOutputSignalDtrRts  
  DisplayString as basicControlOutputName  
  INTEGER as basicControlOutputIndex  

BasicPortTrapEntry  
SEQUENCE    
  INTEGER as basicPortTrapIndex  
  INTEGER as basicPortSignalName  
  INTEGER as basicPortTrapStatus  

BasicAlarmMasterInputEntry  
SEQUENCE    
  INTEGER as basicAlarmMasterInputPort  
  INTEGER as basicAlarmMasterInputSlot  
  INTEGER as basicAlarmMasterInputPoint  
  DisplayString as basicAlarmMasterInputName  
  INTEGER as basicAlarmMasterInputTrapEnable  
  INTEGER as basicAlarmMasterControlOutputSignal  
  INTEGER as basicAlarmMasterInputEnable  
  INTEGER as basicAlarmMasterInputDebounceInterval  
  INTEGER as basicAlarmMasterInputFaultSeverity  
  INTEGER as basicAlarmMasterInputFaultState  
  INTEGER as basicAlarmMasterInputStatus  
  INTEGER as basicAlarmMasterInputValue  
  INTEGER as basicAlarmMasterDisplay  
  DisplayString as basicAlarmMasterInputZone  
  DisplayString as basicAlarmMasterInputRelatedEquipment  
  DisplayString as basicAlarmMasterInputSiteId  
  DisplayString as basicAlarmMasterInputManufacturer  
  DisplayString as basicAlarmMasterInputModel  

BasicPowerMasterOutletEntry  
SEQUENCE    
  INTEGER as basicPowerMasterPortIndex  
  INTEGER as basicPowerMasterOutletIndex  
  DisplayString as basicPowerMasterOutletName  
  INTEGER as basicPowerMasterOutletState  
  DisplayString as basicPowerMasterOutletAmperageStatus  

BasicControlOutputRelayEntry  
SEQUENCE    
  INTEGER as basicControlOutputRelayIndex  
  DisplayString as basicControlOutputRelayName  
  INTEGER as basicControlOutputRelayState  
  INTEGER as basicControlOutputRelayStatus  

QueueEntry  
SEQUENCE    
  INTEGER as queueJob  
  INTEGER as queueStatus  
  DisplayString as queueSourceName  
  DisplayString as queueServiceName  
  INTEGER as queueServicePortIndex  
  DisplayString as queueServicePortName  

QueuePortEntry  
SEQUENCE    
  INTEGER as queuePortIndex  
  INTEGER as queuePortQueuing  



NetLoginServerEntry  
SEQUENCE    
  DisplayString as netLoginServerName  
  INTEGER as netLoginServerStatus  
  DisplayString as netLoginServerPath  
  DisplayString as netLoginServerSeparator  

NetLoginPortEntry  
SEQUENCE    
  INTEGER as netLoginPortIndex  
  INTEGER as netLoginPortScriptUse  
  INTEGER as netLoginPortScriptEcho  
  AddressType as netLoginPortLoaderAddressType  
  OCTET STRING as netLoginPortLoaderAddress  
  DisplayString as netLoginPortLoaderFile  
  DisplayString as netLoginPortExecuteFile  

DialPortEntry  
SEQUENCE    
  INTEGER as dialPortIndex  
  INTEGER as dialPortDialback  
  INTEGER as dialPortDialbackTimeout  
  INTEGER as dialPortDialout  
  INTEGER as dialPortDialbackNoUsername  

SessionLogEntry  
SEQUENCE    
  INTEGER as sessionLogIndex  
  INTEGER as sessionLogConnectionID  
  INTEGER as sessionLogPort  
  INTEGER as sessionLogEvent  
  INTEGER as sessionLogEventDetail  
  DisplayString as sessionLogUserName  
  DisplayString as sessionLogRemoteName  
  DateTime as sessionLogConnectTime  
  DateTime as sessionLogDisconnectTime  
  Counter as sessionLogInCharacters  
  Counter as sessionLogOutCharacters  
  INTEGER as sessionLogVerboseEvent  
  INTEGER as sessionLogX25Direction  
  DisplayString as sessionLogVerboseMessage  
  OCTET STRING as sessionLogX25CallerAddress  
  OCTET STRING as sessionLogX25CalledAddress  
  INTEGER as sessionLogX25DisconnectCause  
  INTEGER as sessionLogX25DisconnectDiagnostic  

CclParsedScriptEntry  
SEQUENCE    
  DisplayString as cclScriptName  
  INTEGER as cclScriptControl  

CclPortEntry  
SEQUENCE    
  DisplayString as cclPortCclName  
  INTEGER as cclPortModemAudible  

BroadcastGroupEntry  
SEQUENCE    
  INTEGER as broadcastGroupIndex  
  INTEGER as broadcastGroupStatus  
  INTEGER as broadcastGroupMaster  
  OCTET STRING as broadcastGroupSlaves  
  OCTET STRING as broadcastGroupSlavesBroadcastOnly  
  INTEGER as broadcastGroupSlaveTcpPort  
  INTEGER as broadcastGroupSlaveTcpBroadcastOnly  

PingHostsEntry  
SEQUENCE    
  INTEGER as icmpPingHostIndex  
  IpAddress as icmpPingHostAddress  
  DisplayString as icmpPingHostDescription  
  INTEGER as icmpPingHostNotificationType  
  INTEGER as icmpPingHostPollingInterval  
  INTEGER as icmpPingHostMaximumRetries  
  INTEGER as icmpPingHostTrapSeverityLevel  
  INTEGER as icmpPingHostStatus