MSTP-MIB

File: MSTP-MIB.mib (14121 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SWL2MGMT-MIB

Imported symbols

Counter enterprises TimeTicks
MODULE-IDENTITY OBJECT-TYPE swL2MgmtMIB

Defined Objects

swL2MgmtMSTP 1.3.6.1.4.1.326.2.20.1.11.32.2.15
The Network Management Information of Multiple Spanning Tree for the D-Link enterprise.
MODULE-IDENTITY    

swL2MgmtDefaultStpId 1.3.6.1.4.1.326.2.20.1.11.32.2.15.1
This id is used to identify the default STP. And the associated STP will be present under dot1dStp (1.3.6.1.2.1.17.2) in rfc1493.
OBJECT-TYPE    
  INTEGER 1..12  

swL2MgmtStpTable 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2
A table that contains all the information for the Multiple Spanning Tree Protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MgmtStpEntry

swL2MgmtStpEntry 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1
A list of information maintained every STP information.
OBJECT-TYPE    
  SwL2MgmtStpEntry  

swL2MgmtStpId 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.1
The id is used to identify each STP.
OBJECT-TYPE    
  INTEGER  

swL2MgmtStpProtocolSpecification 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.2
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

swL2MgmtStpPriority 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.3
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2MgmtStpTimeSinceTopologyChange 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.4
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
OBJECT-TYPE    
  TimeTicks  

swL2MgmtStpTopChanges 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.5
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
OBJECT-TYPE    
  Counter  

swL2MgmtStpDesignatedRoot 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.6
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
OBJECT-TYPE    
  BridgeId  

swL2MgmtStpRootCost 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.7
The cost of the path to the root as seen from this bridge.
OBJECT-TYPE    
  INTEGER  

swL2MgmtStpRootPort 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.8
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
OBJECT-TYPE    
  INTEGER  

swL2MgmtStpMaxAge 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.9
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

swL2MgmtStpHelloTime 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.10
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

swL2MgmtStpHoldTime 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.11
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
OBJECT-TYPE    
  INTEGER  

swL2MgmtStpForwardDelay 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.12
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
OBJECT-TYPE    
  Timeout  

swL2MgmtStpBridgeMaxAge 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.13
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 600..4000  

swL2MgmtStpBridgeHelloTime 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.14
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 100..1000  

swL2MgmtStpBridgeForwardDelay 1.3.6.1.4.1.326.2.20.1.11.32.2.15.2.1.15
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 400..3000  

Defined Objects

BridgeId  
OCTET STRING SIZE(8)    

Timeout  
INTEGER    

SwL2MgmtStpEntry  
SEQUENCE    
  INTEGER as swL2MgmtStpId  
  INTEGER as swL2MgmtStpProtocolSpecification  
  INTEGER as swL2MgmtStpPriority  
  TimeTicks as swL2MgmtStpTimeSinceTopologyChange  
  Counter as swL2MgmtStpTopChanges  
  BridgeId as swL2MgmtStpDesignatedRoot  
  INTEGER as swL2MgmtStpRootCost  
  INTEGER as swL2MgmtStpRootPort  
  Timeout as swL2MgmtStpMaxAge  
  Timeout as swL2MgmtStpHelloTime  
  INTEGER as swL2MgmtStpHoldTime  
  Timeout as swL2MgmtStpForwardDelay  
  Timeout as swL2MgmtStpBridgeMaxAge  
  Timeout as swL2MgmtStpBridgeHelloTime  
  Timeout as swL2MgmtStpBridgeForwardDelay