Nortel-Magellan-Passport-LanDriversMIB

File: Nortel-Magellan-Passport-LanDriversMIB.mib (459659 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-LogicalProcessorMIB

Imported symbols

OBJECT-TYPE components passportMIBs
FddiMACLongAddressType Counter32 DisplayString
FddiTimeNano StorageType RowStatus
PassportCounter64 InterfaceIndex Gauge32
Integer32 MacAddress FddiTimeMilli
Unsigned32 AsciiString NonReplicated
EnterpriseDateAndTime Link lpIndex
lp

Defined Objects

lpEnet 1.3.6.1.4.1.562.2.4.1.12.3
OBJECT IDENTIFIER    

lpEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.1
This entry controls the addition and deletion of lpEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetRowStatusEntry

lpEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.1.1
A single entry in the table represents a single lpEnet component.
OBJECT-TYPE    
  LpEnetRowStatusEntry  

lpEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.1.1.1
This variable is used as the basis for SNMP naming of lpEnet components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.3.1.1.4
This variable represents the storage type value for the lpEnet tables.
OBJECT-TYPE    
  StorageType  

lpEnetIndex 1.3.6.1.4.1.562.2.4.1.12.3.1.1.10
This variable represents the index for the lpEnet tables.
OBJECT-TYPE    
  Integer32 0..5  

lpEnetLt 1.3.6.1.4.1.562.2.4.1.12.3.2
OBJECT IDENTIFIER    

lpEnetLtRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.1
This entry controls the addition and deletion of lpEnetLt components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtRowStatusEntry

lpEnetLtRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.1.1
A single entry in the table represents a single lpEnetLt component.
OBJECT-TYPE    
  LpEnetLtRowStatusEntry  

lpEnetLtRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.4
This variable represents the storage type value for the lpEnetLt tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.10
This variable represents the index for the lpEnetLt tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFrmCmp 1.3.6.1.4.1.562.2.4.1.12.3.2.2
OBJECT IDENTIFIER    

lpEnetLtFrmCmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1
This entry controls the addition and deletion of lpEnetLtFrmCmp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFrmCmpRowStatusEntry

lpEnetLtFrmCmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1
A single entry in the table represents a single lpEnetLtFrmCmp component.
OBJECT-TYPE    
  LpEnetLtFrmCmpRowStatusEntry  

lpEnetLtFrmCmpRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFrmCmp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFrmCmpComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFrmCmpStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.4
This variable represents the storage type value for the lpEnetLtFrmCmp tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFrmCmpIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.10
This variable represents the index for the lpEnetLtFrmCmp tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFrmCmpTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFrmCmpTopEntry

lpEnetLtFrmCmpTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.2.10.1
An entry in the lpEnetLtFrmCmpTopTable.
OBJECT-TYPE    
  LpEnetLtFrmCmpTopEntry  

lpEnetLtFrmCmpTData 1.3.6.1.4.1.562.2.4.1.12.3.2.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFrmCpy 1.3.6.1.4.1.562.2.4.1.12.3.2.3
OBJECT IDENTIFIER    

lpEnetLtFrmCpyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1
This entry controls the addition and deletion of lpEnetLtFrmCpy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFrmCpyRowStatusEntry

lpEnetLtFrmCpyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1
A single entry in the table represents a single lpEnetLtFrmCpy component.
OBJECT-TYPE    
  LpEnetLtFrmCpyRowStatusEntry  

lpEnetLtFrmCpyRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFrmCpy components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFrmCpyComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFrmCpyStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.4
This variable represents the storage type value for the lpEnetLtFrmCpy tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFrmCpyIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.10
This variable represents the index for the lpEnetLtFrmCpy tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFrmCpyTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFrmCpyTopEntry

lpEnetLtFrmCpyTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.3.10.1
An entry in the lpEnetLtFrmCpyTopTable.
OBJECT-TYPE    
  LpEnetLtFrmCpyTopEntry  

lpEnetLtFrmCpyTData 1.3.6.1.4.1.562.2.4.1.12.3.2.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtPrtCfg 1.3.6.1.4.1.562.2.4.1.12.3.2.4
OBJECT IDENTIFIER    

lpEnetLtPrtCfgRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1
This entry controls the addition and deletion of lpEnetLtPrtCfg components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtPrtCfgRowStatusEntry

lpEnetLtPrtCfgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1
A single entry in the table represents a single lpEnetLtPrtCfg component.
OBJECT-TYPE    
  LpEnetLtPrtCfgRowStatusEntry  

lpEnetLtPrtCfgRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtPrtCfg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtPrtCfgComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtPrtCfgStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.4
This variable represents the storage type value for the lpEnetLtPrtCfg tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtPrtCfgIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.10
This variable represents the index for the lpEnetLtPrtCfg tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtPrtCfgTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtPrtCfgTopEntry

lpEnetLtPrtCfgTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.4.10.1
An entry in the lpEnetLtPrtCfgTopTable.
OBJECT-TYPE    
  LpEnetLtPrtCfgTopEntry  

lpEnetLtPrtCfgTData 1.3.6.1.4.1.562.2.4.1.12.3.2.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFb 1.3.6.1.4.1.562.2.4.1.12.3.2.5
OBJECT IDENTIFIER    

lpEnetLtFbRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1
This entry controls the addition and deletion of lpEnetLtFb components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbRowStatusEntry

lpEnetLtFbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1
A single entry in the table represents a single lpEnetLtFb component.
OBJECT-TYPE    
  LpEnetLtFbRowStatusEntry  

lpEnetLtFbRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.4
This variable represents the storage type value for the lpEnetLtFb tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.10
This variable represents the index for the lpEnetLtFb tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbTxInfo 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2
OBJECT IDENTIFIER    

lpEnetLtFbTxInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1
This entry controls the addition and deletion of lpEnetLtFbTxInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbTxInfoRowStatusEntry

lpEnetLtFbTxInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1
A single entry in the table represents a single lpEnetLtFbTxInfo component.
OBJECT-TYPE    
  LpEnetLtFbTxInfoRowStatusEntry  

lpEnetLtFbTxInfoRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbTxInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbTxInfoComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbTxInfoStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.4
This variable represents the storage type value for the lpEnetLtFbTxInfo tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbTxInfoIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.10
This variable represents the index for the lpEnetLtFbTxInfo tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbTxInfoTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbTxInfoTopEntry

lpEnetLtFbTxInfoTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10.1
An entry in the lpEnetLtFbTxInfoTopTable.
OBJECT-TYPE    
  LpEnetLtFbTxInfoTopEntry  

lpEnetLtFbTxInfoTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbFddiMac 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3
OBJECT IDENTIFIER    

lpEnetLtFbFddiMacRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1
This entry controls the addition and deletion of lpEnetLtFbFddiMac components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbFddiMacRowStatusEntry

lpEnetLtFbFddiMacRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1
A single entry in the table represents a single lpEnetLtFbFddiMac component.
OBJECT-TYPE    
  LpEnetLtFbFddiMacRowStatusEntry  

lpEnetLtFbFddiMacRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbFddiMac components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbFddiMacComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbFddiMacStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.4
This variable represents the storage type value for the lpEnetLtFbFddiMac tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbFddiMacIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.10
This variable represents the index for the lpEnetLtFbFddiMac tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbFddiMacTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbFddiMacTopEntry

lpEnetLtFbFddiMacTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.10.1
An entry in the lpEnetLtFbFddiMacTopTable.
OBJECT-TYPE    
  LpEnetLtFbFddiMacTopEntry  

lpEnetLtFbFddiMacTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbMacEnet 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4
OBJECT IDENTIFIER    

lpEnetLtFbMacEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1
This entry controls the addition and deletion of lpEnetLtFbMacEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbMacEnetRowStatusEntry

lpEnetLtFbMacEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1
A single entry in the table represents a single lpEnetLtFbMacEnet component.
OBJECT-TYPE    
  LpEnetLtFbMacEnetRowStatusEntry  

lpEnetLtFbMacEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbMacEnet components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbMacEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbMacEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.4
This variable represents the storage type value for the lpEnetLtFbMacEnet tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbMacEnetIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.10
This variable represents the index for the lpEnetLtFbMacEnet tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbMacEnetTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbMacEnetTopEntry

lpEnetLtFbMacEnetTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.10.1
An entry in the lpEnetLtFbMacEnetTopTable.
OBJECT-TYPE    
  LpEnetLtFbMacEnetTopEntry  

lpEnetLtFbMacEnetTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbMacTr 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5
OBJECT IDENTIFIER    

lpEnetLtFbMacTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1
This entry controls the addition and deletion of lpEnetLtFbMacTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbMacTrRowStatusEntry

lpEnetLtFbMacTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1
A single entry in the table represents a single lpEnetLtFbMacTr component.
OBJECT-TYPE    
  LpEnetLtFbMacTrRowStatusEntry  

lpEnetLtFbMacTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbMacTr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbMacTrComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbMacTrStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.4
This variable represents the storage type value for the lpEnetLtFbMacTr tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbMacTrIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.10
This variable represents the index for the lpEnetLtFbMacTr tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbMacTrTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbMacTrTopEntry

lpEnetLtFbMacTrTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10.1
An entry in the lpEnetLtFbMacTrTopTable.
OBJECT-TYPE    
  LpEnetLtFbMacTrTopEntry  

lpEnetLtFbMacTrTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6
OBJECT IDENTIFIER    

lpEnetLtFbDataRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1
This entry controls the addition and deletion of lpEnetLtFbData components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbDataRowStatusEntry

lpEnetLtFbDataRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1
A single entry in the table represents a single lpEnetLtFbData component.
OBJECT-TYPE    
  LpEnetLtFbDataRowStatusEntry  

lpEnetLtFbDataRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbData components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbDataComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbDataStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.4
This variable represents the storage type value for the lpEnetLtFbData tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbDataIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.10
This variable represents the index for the lpEnetLtFbData tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbDataTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbDataTopEntry

lpEnetLtFbDataTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10.1
An entry in the lpEnetLtFbDataTopTable.
OBJECT-TYPE    
  LpEnetLtFbDataTopEntry  

lpEnetLtFbDataTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbIpH 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7
OBJECT IDENTIFIER    

lpEnetLtFbIpHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1
This entry controls the addition and deletion of lpEnetLtFbIpH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbIpHRowStatusEntry

lpEnetLtFbIpHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1
A single entry in the table represents a single lpEnetLtFbIpH component.
OBJECT-TYPE    
  LpEnetLtFbIpHRowStatusEntry  

lpEnetLtFbIpHRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbIpH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbIpHComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbIpHStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.4
This variable represents the storage type value for the lpEnetLtFbIpH tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbIpHIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.10
This variable represents the index for the lpEnetLtFbIpH tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbIpHTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbIpHTopEntry

lpEnetLtFbIpHTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10.1
An entry in the lpEnetLtFbIpHTopTable.
OBJECT-TYPE    
  LpEnetLtFbIpHTopEntry  

lpEnetLtFbIpHTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbLlch 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8
OBJECT IDENTIFIER    

lpEnetLtFbLlchRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1
This entry controls the addition and deletion of lpEnetLtFbLlch components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbLlchRowStatusEntry

lpEnetLtFbLlchRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1
A single entry in the table represents a single lpEnetLtFbLlch component.
OBJECT-TYPE    
  LpEnetLtFbLlchRowStatusEntry  

lpEnetLtFbLlchRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbLlch components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbLlchComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbLlchStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.4
This variable represents the storage type value for the lpEnetLtFbLlch tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbLlchIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.10
This variable represents the index for the lpEnetLtFbLlch tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbLlchTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbLlchTopEntry

lpEnetLtFbLlchTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10.1
An entry in the lpEnetLtFbLlchTopTable.
OBJECT-TYPE    
  LpEnetLtFbLlchTopEntry  

lpEnetLtFbLlchTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbAppleH 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9
OBJECT IDENTIFIER    

lpEnetLtFbAppleHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1
This entry controls the addition and deletion of lpEnetLtFbAppleH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbAppleHRowStatusEntry

lpEnetLtFbAppleHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1
A single entry in the table represents a single lpEnetLtFbAppleH component.
OBJECT-TYPE    
  LpEnetLtFbAppleHRowStatusEntry  

lpEnetLtFbAppleHRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbAppleH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbAppleHComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbAppleHStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.4
This variable represents the storage type value for the lpEnetLtFbAppleH tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbAppleHIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.10
This variable represents the index for the lpEnetLtFbAppleH tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbAppleHTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbAppleHTopEntry

lpEnetLtFbAppleHTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10.1
An entry in the lpEnetLtFbAppleHTopTable.
OBJECT-TYPE    
  LpEnetLtFbAppleHTopEntry  

lpEnetLtFbAppleHTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbIpxH 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10
OBJECT IDENTIFIER    

lpEnetLtFbIpxHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1
This entry controls the addition and deletion of lpEnetLtFbIpxH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbIpxHRowStatusEntry

lpEnetLtFbIpxHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1
A single entry in the table represents a single lpEnetLtFbIpxH component.
OBJECT-TYPE    
  LpEnetLtFbIpxHRowStatusEntry  

lpEnetLtFbIpxHRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtFbIpxH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtFbIpxHComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtFbIpxHStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.4
This variable represents the storage type value for the lpEnetLtFbIpxH tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtFbIpxHIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.10
This variable represents the index for the lpEnetLtFbIpxH tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtFbIpxHTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbIpxHTopEntry

lpEnetLtFbIpxHTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10.1
An entry in the lpEnetLtFbIpxHTopTable.
OBJECT-TYPE    
  LpEnetLtFbIpxHTopEntry  

lpEnetLtFbIpxHTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtFbTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.5.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtFbTopEntry

lpEnetLtFbTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.5.20.1
An entry in the lpEnetLtFbTopTable.
OBJECT-TYPE    
  LpEnetLtFbTopEntry  

lpEnetLtFbTData 1.3.6.1.4.1.562.2.4.1.12.3.2.5.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtCntl 1.3.6.1.4.1.562.2.4.1.12.3.2.6
OBJECT IDENTIFIER    

lpEnetLtCntlRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1
This entry controls the addition and deletion of lpEnetLtCntl components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtCntlRowStatusEntry

lpEnetLtCntlRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1
A single entry in the table represents a single lpEnetLtCntl component.
OBJECT-TYPE    
  LpEnetLtCntlRowStatusEntry  

lpEnetLtCntlRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.1
This variable is used as the basis for SNMP naming of lpEnetLtCntl components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetLtCntlComponentName 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetLtCntlStorageType 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.4
This variable represents the storage type value for the lpEnetLtCntl tables.
OBJECT-TYPE    
  StorageType  

lpEnetLtCntlIndex 1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.10
This variable represents the index for the lpEnetLtCntl tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetLtCntlTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtCntlTopEntry

lpEnetLtCntlTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.6.10.1
An entry in the lpEnetLtCntlTopTable.
OBJECT-TYPE    
  LpEnetLtCntlTopEntry  

lpEnetLtCntlTData 1.3.6.1.4.1.562.2.4.1.12.3.2.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetLtTopTable 1.3.6.1.4.1.562.2.4.1.12.3.2.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetLtTopEntry

lpEnetLtTopEntry 1.3.6.1.4.1.562.2.4.1.12.3.2.20.1
An entry in the lpEnetLtTopTable.
OBJECT-TYPE    
  LpEnetLtTopEntry  

lpEnetLtTData 1.3.6.1.4.1.562.2.4.1.12.3.2.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEnetTest 1.3.6.1.4.1.562.2.4.1.12.3.5
OBJECT IDENTIFIER    

lpEnetTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.5.1
This entry controls the addition and deletion of lpEnetTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetTestRowStatusEntry

lpEnetTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.5.1.1
A single entry in the table represents a single lpEnetTest component.
OBJECT-TYPE    
  LpEnetTestRowStatusEntry  

lpEnetTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.1
This variable is used as the basis for SNMP naming of lpEnetTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEnetTestComponentName 1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEnetTestStorageType 1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.4
This variable represents the storage type value for the lpEnetTest tables.
OBJECT-TYPE    
  StorageType  

lpEnetTestIndex 1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.10
This variable represents the index for the lpEnetTest tables.
OBJECT-TYPE    
  NonReplicated  

lpEnetTestPTOTable 1.3.6.1.4.1.562.2.4.1.12.3.5.10
This group contains the operational data for the LanPortTest component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetTestPTOEntry

lpEnetTestPTOEntry 1.3.6.1.4.1.562.2.4.1.12.3.5.10.1
An entry in the lpEnetTestPTOTable.
OBJECT-TYPE    
  LpEnetTestPTOEntry  

lpEnetTestType 1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.1
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors.
OBJECT-TYPE    
  INTEGER onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268)  

lpEnetTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.2
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpEnetTestDuration 1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.3
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpEnetTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.3.5.11
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetTestResultsEntry

lpEnetTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1
An entry in the lpEnetTestResultsTable.
OBJECT-TYPE    
  LpEnetTestResultsEntry  

lpEnetTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.4
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpEnetTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.5
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpEnetTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.6
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4)  

lpEnetTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.7
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEnetTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.8
This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEnetTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEnetTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.10
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEnetTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.11
This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEnetCidDataTable 1.3.6.1.4.1.562.2.4.1.12.3.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetCidDataEntry

lpEnetCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.3.10.1
An entry in the lpEnetCidDataTable.
OBJECT-TYPE    
  LpEnetCidDataEntry  

lpEnetCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.3.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpEnetIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.3.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetIfEntryEntry

lpEnetIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.3.11.1
An entry in the lpEnetIfEntryTable.
OBJECT-TYPE    
  LpEnetIfEntryEntry  

lpEnetIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.3.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpEnetIfIndex 1.3.6.1.4.1.562.2.4.1.12.3.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpEnetProvTable 1.3.6.1.4.1.562.2.4.1.12.3.12
This group contains provisioned attributes for the Ethernet component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetProvEntry

lpEnetProvEntry 1.3.6.1.4.1.562.2.4.1.12.3.12.1
An entry in the lpEnetProvTable.
OBJECT-TYPE    
  LpEnetProvEntry  

lpEnetHeartbeatPacket 1.3.6.1.4.1.562.2.4.1.12.3.12.1.1
The heartbeat packet feature is used to select whether or not the station will generate a heartbeat packet. If enabled, the station will generate one heartbeat packet every second. If disabled, the station will not generate any heartbeat packets.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpEnetApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.3.12.1.2
This attribute contains the component name of a Framer which is associated with the Ethernet component. This link is used by the component administration system (CAS) to identify which card the application component (associated with the Framer component) is to be created.
OBJECT-TYPE    
  Link  

lpEnetAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.3.13
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetAdminInfoEntry

lpEnetAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.3.13.1
An entry in the lpEnetAdminInfoTable.
OBJECT-TYPE    
  LpEnetAdminInfoEntry  

lpEnetVendor 1.3.6.1.4.1.562.2.4.1.12.3.13.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpEnetCommentText 1.3.6.1.4.1.562.2.4.1.12.3.13.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpEnetStateTable 1.3.6.1.4.1.562.2.4.1.12.3.15
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetStateEntry

lpEnetStateEntry 1.3.6.1.4.1.562.2.4.1.12.3.15.1
An entry in the lpEnetStateTable.
OBJECT-TYPE    
  LpEnetStateEntry  

lpEnetAdminState 1.3.6.1.4.1.562.2.4.1.12.3.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpEnetOperationalState 1.3.6.1.4.1.562.2.4.1.12.3.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpEnetUsageState 1.3.6.1.4.1.562.2.4.1.12.3.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpEnetOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.3.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetOperStatusEntry

lpEnetOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.3.16.1
An entry in the lpEnetOperStatusTable.
OBJECT-TYPE    
  LpEnetOperStatusEntry  

lpEnetSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.3.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpEnetOperTable 1.3.6.1.4.1.562.2.4.1.12.3.17
This group contains the operational attributes of the Ethernet component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetOperEntry

lpEnetOperEntry 1.3.6.1.4.1.562.2.4.1.12.3.17.1
An entry in the lpEnetOperTable.
OBJECT-TYPE    
  LpEnetOperEntry  

lpEnetMacAddress 1.3.6.1.4.1.562.2.4.1.12.3.17.1.1
The medium access controller (MAC) address is an address that is only recognized by one station on the network The value of this attribute will be assigned by the system. MAC address is displayed in canonical format.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpEnetStatsTable 1.3.6.1.4.1.562.2.4.1.12.3.18
This group contains statistical attributes for the Ethernet component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEnetStatsEntry

lpEnetStatsEntry 1.3.6.1.4.1.562.2.4.1.12.3.18.1
An entry in the lpEnetStatsTable.
OBJECT-TYPE    
  LpEnetStatsEntry  

lpEnetAlignmentErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.2
The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetFcsErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.3
The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetSingleCollisionFrames 1.3.6.1.4.1.562.2.4.1.12.3.18.1.4
The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetMultipleCollisionFrames 1.3.6.1.4.1.562.2.4.1.12.3.18.1.5
The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetSqeTestErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.6
The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetDeferredTransmissions 1.3.6.1.4.1.562.2.4.1.12.3.18.1.7
The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetLateCollisions 1.3.6.1.4.1.562.2.4.1.12.3.18.1.8
The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetExcessiveCollisions 1.3.6.1.4.1.562.2.4.1.12.3.18.1.9
The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetMacTransmitErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.10
The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetCarrierSenseErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.11
The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetFrameTooLongs 1.3.6.1.4.1.562.2.4.1.12.3.18.1.12
The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEnetMacReceiveErrors 1.3.6.1.4.1.562.2.4.1.12.3.18.1.13
The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFi 1.3.6.1.4.1.562.2.4.1.12.4
OBJECT IDENTIFIER    

lpFiRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.1
This entry controls the addition and deletion of lpFi components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiRowStatusEntry

lpFiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.1.1
A single entry in the table represents a single lpFi component.
OBJECT-TYPE    
  LpFiRowStatusEntry  

lpFiRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.1.1.1
This variable is used as the basis for SNMP naming of lpFi components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpFiComponentName 1.3.6.1.4.1.562.2.4.1.12.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiStorageType 1.3.6.1.4.1.562.2.4.1.12.4.1.1.4
This variable represents the storage type value for the lpFi tables.
OBJECT-TYPE    
  StorageType  

lpFiIndex 1.3.6.1.4.1.562.2.4.1.12.4.1.1.10
This variable represents the index for the lpFi tables.
OBJECT-TYPE    
  Integer32 0  

lpFiLt 1.3.6.1.4.1.562.2.4.1.12.4.2
OBJECT IDENTIFIER    

lpFiLtRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.1
This entry controls the addition and deletion of lpFiLt components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtRowStatusEntry

lpFiLtRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.1.1
A single entry in the table represents a single lpFiLt component.
OBJECT-TYPE    
  LpFiLtRowStatusEntry  

lpFiLtRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.1
This variable is used as the basis for SNMP naming of lpFiLt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.4
This variable represents the storage type value for the lpFiLt tables.
OBJECT-TYPE    
  StorageType  

lpFiLtIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.10
This variable represents the index for the lpFiLt tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFrmCmp 1.3.6.1.4.1.562.2.4.1.12.4.2.2
OBJECT IDENTIFIER    

lpFiLtFrmCmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1
This entry controls the addition and deletion of lpFiLtFrmCmp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFrmCmpRowStatusEntry

lpFiLtFrmCmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1
A single entry in the table represents a single lpFiLtFrmCmp component.
OBJECT-TYPE    
  LpFiLtFrmCmpRowStatusEntry  

lpFiLtFrmCmpRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFrmCmp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFrmCmpComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFrmCmpStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.4
This variable represents the storage type value for the lpFiLtFrmCmp tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFrmCmpIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.10
This variable represents the index for the lpFiLtFrmCmp tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFrmCmpTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFrmCmpTopEntry

lpFiLtFrmCmpTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.2.10.1
An entry in the lpFiLtFrmCmpTopTable.
OBJECT-TYPE    
  LpFiLtFrmCmpTopEntry  

lpFiLtFrmCmpTData 1.3.6.1.4.1.562.2.4.1.12.4.2.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFrmCpy 1.3.6.1.4.1.562.2.4.1.12.4.2.3
OBJECT IDENTIFIER    

lpFiLtFrmCpyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1
This entry controls the addition and deletion of lpFiLtFrmCpy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFrmCpyRowStatusEntry

lpFiLtFrmCpyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1
A single entry in the table represents a single lpFiLtFrmCpy component.
OBJECT-TYPE    
  LpFiLtFrmCpyRowStatusEntry  

lpFiLtFrmCpyRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFrmCpy components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFrmCpyComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFrmCpyStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.4
This variable represents the storage type value for the lpFiLtFrmCpy tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFrmCpyIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.10
This variable represents the index for the lpFiLtFrmCpy tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFrmCpyTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFrmCpyTopEntry

lpFiLtFrmCpyTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.3.10.1
An entry in the lpFiLtFrmCpyTopTable.
OBJECT-TYPE    
  LpFiLtFrmCpyTopEntry  

lpFiLtFrmCpyTData 1.3.6.1.4.1.562.2.4.1.12.4.2.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtPrtCfg 1.3.6.1.4.1.562.2.4.1.12.4.2.4
OBJECT IDENTIFIER    

lpFiLtPrtCfgRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1
This entry controls the addition and deletion of lpFiLtPrtCfg components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtPrtCfgRowStatusEntry

lpFiLtPrtCfgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1
A single entry in the table represents a single lpFiLtPrtCfg component.
OBJECT-TYPE    
  LpFiLtPrtCfgRowStatusEntry  

lpFiLtPrtCfgRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtPrtCfg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtPrtCfgComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtPrtCfgStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.4
This variable represents the storage type value for the lpFiLtPrtCfg tables.
OBJECT-TYPE    
  StorageType  

lpFiLtPrtCfgIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.10
This variable represents the index for the lpFiLtPrtCfg tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtPrtCfgTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtPrtCfgTopEntry

lpFiLtPrtCfgTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.4.10.1
An entry in the lpFiLtPrtCfgTopTable.
OBJECT-TYPE    
  LpFiLtPrtCfgTopEntry  

lpFiLtPrtCfgTData 1.3.6.1.4.1.562.2.4.1.12.4.2.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFb 1.3.6.1.4.1.562.2.4.1.12.4.2.5
OBJECT IDENTIFIER    

lpFiLtFbRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1
This entry controls the addition and deletion of lpFiLtFb components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbRowStatusEntry

lpFiLtFbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1
A single entry in the table represents a single lpFiLtFb component.
OBJECT-TYPE    
  LpFiLtFbRowStatusEntry  

lpFiLtFbRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.4
This variable represents the storage type value for the lpFiLtFb tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.10
This variable represents the index for the lpFiLtFb tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbTxInfo 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2
OBJECT IDENTIFIER    

lpFiLtFbTxInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1
This entry controls the addition and deletion of lpFiLtFbTxInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbTxInfoRowStatusEntry

lpFiLtFbTxInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1
A single entry in the table represents a single lpFiLtFbTxInfo component.
OBJECT-TYPE    
  LpFiLtFbTxInfoRowStatusEntry  

lpFiLtFbTxInfoRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbTxInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbTxInfoComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbTxInfoStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.4
This variable represents the storage type value for the lpFiLtFbTxInfo tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbTxInfoIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.10
This variable represents the index for the lpFiLtFbTxInfo tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbTxInfoTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbTxInfoTopEntry

lpFiLtFbTxInfoTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10.1
An entry in the lpFiLtFbTxInfoTopTable.
OBJECT-TYPE    
  LpFiLtFbTxInfoTopEntry  

lpFiLtFbTxInfoTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbFddiMac 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3
OBJECT IDENTIFIER    

lpFiLtFbFddiMacRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1
This entry controls the addition and deletion of lpFiLtFbFddiMac components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbFddiMacRowStatusEntry

lpFiLtFbFddiMacRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1
A single entry in the table represents a single lpFiLtFbFddiMac component.
OBJECT-TYPE    
  LpFiLtFbFddiMacRowStatusEntry  

lpFiLtFbFddiMacRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbFddiMac components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbFddiMacComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbFddiMacStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.4
This variable represents the storage type value for the lpFiLtFbFddiMac tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbFddiMacIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.10
This variable represents the index for the lpFiLtFbFddiMac tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbFddiMacTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbFddiMacTopEntry

lpFiLtFbFddiMacTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10.1
An entry in the lpFiLtFbFddiMacTopTable.
OBJECT-TYPE    
  LpFiLtFbFddiMacTopEntry  

lpFiLtFbFddiMacTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbMacEnet 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4
OBJECT IDENTIFIER    

lpFiLtFbMacEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1
This entry controls the addition and deletion of lpFiLtFbMacEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbMacEnetRowStatusEntry

lpFiLtFbMacEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1
A single entry in the table represents a single lpFiLtFbMacEnet component.
OBJECT-TYPE    
  LpFiLtFbMacEnetRowStatusEntry  

lpFiLtFbMacEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbMacEnet components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbMacEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbMacEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.4
This variable represents the storage type value for the lpFiLtFbMacEnet tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbMacEnetIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.10
This variable represents the index for the lpFiLtFbMacEnet tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbMacEnetTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbMacEnetTopEntry

lpFiLtFbMacEnetTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10.1
An entry in the lpFiLtFbMacEnetTopTable.
OBJECT-TYPE    
  LpFiLtFbMacEnetTopEntry  

lpFiLtFbMacEnetTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbMacTr 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5
OBJECT IDENTIFIER    

lpFiLtFbMacTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1
This entry controls the addition and deletion of lpFiLtFbMacTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbMacTrRowStatusEntry

lpFiLtFbMacTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1
A single entry in the table represents a single lpFiLtFbMacTr component.
OBJECT-TYPE    
  LpFiLtFbMacTrRowStatusEntry  

lpFiLtFbMacTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbMacTr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbMacTrComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbMacTrStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.4
This variable represents the storage type value for the lpFiLtFbMacTr tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbMacTrIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.10
This variable represents the index for the lpFiLtFbMacTr tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbMacTrTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbMacTrTopEntry

lpFiLtFbMacTrTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10.1
An entry in the lpFiLtFbMacTrTopTable.
OBJECT-TYPE    
  LpFiLtFbMacTrTopEntry  

lpFiLtFbMacTrTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6
OBJECT IDENTIFIER    

lpFiLtFbDataRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1
This entry controls the addition and deletion of lpFiLtFbData components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbDataRowStatusEntry

lpFiLtFbDataRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1
A single entry in the table represents a single lpFiLtFbData component.
OBJECT-TYPE    
  LpFiLtFbDataRowStatusEntry  

lpFiLtFbDataRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbData components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbDataComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbDataStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.4
This variable represents the storage type value for the lpFiLtFbData tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbDataIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.10
This variable represents the index for the lpFiLtFbData tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbDataTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbDataTopEntry

lpFiLtFbDataTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10.1
An entry in the lpFiLtFbDataTopTable.
OBJECT-TYPE    
  LpFiLtFbDataTopEntry  

lpFiLtFbDataTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbIpH 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7
OBJECT IDENTIFIER    

lpFiLtFbIpHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1
This entry controls the addition and deletion of lpFiLtFbIpH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbIpHRowStatusEntry

lpFiLtFbIpHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1
A single entry in the table represents a single lpFiLtFbIpH component.
OBJECT-TYPE    
  LpFiLtFbIpHRowStatusEntry  

lpFiLtFbIpHRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbIpH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbIpHComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbIpHStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.4
This variable represents the storage type value for the lpFiLtFbIpH tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbIpHIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.10
This variable represents the index for the lpFiLtFbIpH tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbIpHTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbIpHTopEntry

lpFiLtFbIpHTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10.1
An entry in the lpFiLtFbIpHTopTable.
OBJECT-TYPE    
  LpFiLtFbIpHTopEntry  

lpFiLtFbIpHTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbLlch 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8
OBJECT IDENTIFIER    

lpFiLtFbLlchRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1
This entry controls the addition and deletion of lpFiLtFbLlch components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbLlchRowStatusEntry

lpFiLtFbLlchRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1
A single entry in the table represents a single lpFiLtFbLlch component.
OBJECT-TYPE    
  LpFiLtFbLlchRowStatusEntry  

lpFiLtFbLlchRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbLlch components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbLlchComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbLlchStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.4
This variable represents the storage type value for the lpFiLtFbLlch tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbLlchIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.10
This variable represents the index for the lpFiLtFbLlch tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbLlchTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbLlchTopEntry

lpFiLtFbLlchTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10.1
An entry in the lpFiLtFbLlchTopTable.
OBJECT-TYPE    
  LpFiLtFbLlchTopEntry  

lpFiLtFbLlchTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbAppleH 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9
OBJECT IDENTIFIER    

lpFiLtFbAppleHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1
This entry controls the addition and deletion of lpFiLtFbAppleH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbAppleHRowStatusEntry

lpFiLtFbAppleHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1
A single entry in the table represents a single lpFiLtFbAppleH component.
OBJECT-TYPE    
  LpFiLtFbAppleHRowStatusEntry  

lpFiLtFbAppleHRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbAppleH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbAppleHComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbAppleHStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.4
This variable represents the storage type value for the lpFiLtFbAppleH tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbAppleHIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.10
This variable represents the index for the lpFiLtFbAppleH tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbAppleHTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbAppleHTopEntry

lpFiLtFbAppleHTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10.1
An entry in the lpFiLtFbAppleHTopTable.
OBJECT-TYPE    
  LpFiLtFbAppleHTopEntry  

lpFiLtFbAppleHTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbIpxH 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10
OBJECT IDENTIFIER    

lpFiLtFbIpxHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1
This entry controls the addition and deletion of lpFiLtFbIpxH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbIpxHRowStatusEntry

lpFiLtFbIpxHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1
A single entry in the table represents a single lpFiLtFbIpxH component.
OBJECT-TYPE    
  LpFiLtFbIpxHRowStatusEntry  

lpFiLtFbIpxHRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtFbIpxH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtFbIpxHComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtFbIpxHStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.4
This variable represents the storage type value for the lpFiLtFbIpxH tables.
OBJECT-TYPE    
  StorageType  

lpFiLtFbIpxHIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.10
This variable represents the index for the lpFiLtFbIpxH tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtFbIpxHTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbIpxHTopEntry

lpFiLtFbIpxHTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10.1
An entry in the lpFiLtFbIpxHTopTable.
OBJECT-TYPE    
  LpFiLtFbIpxHTopEntry  

lpFiLtFbIpxHTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtFbTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.5.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtFbTopEntry

lpFiLtFbTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.5.20.1
An entry in the lpFiLtFbTopTable.
OBJECT-TYPE    
  LpFiLtFbTopEntry  

lpFiLtFbTData 1.3.6.1.4.1.562.2.4.1.12.4.2.5.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtCntl 1.3.6.1.4.1.562.2.4.1.12.4.2.6
OBJECT IDENTIFIER    

lpFiLtCntlRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1
This entry controls the addition and deletion of lpFiLtCntl components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtCntlRowStatusEntry

lpFiLtCntlRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1
A single entry in the table represents a single lpFiLtCntl component.
OBJECT-TYPE    
  LpFiLtCntlRowStatusEntry  

lpFiLtCntlRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.1
This variable is used as the basis for SNMP naming of lpFiLtCntl components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiLtCntlComponentName 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiLtCntlStorageType 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.4
This variable represents the storage type value for the lpFiLtCntl tables.
OBJECT-TYPE    
  StorageType  

lpFiLtCntlIndex 1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.10
This variable represents the index for the lpFiLtCntl tables.
OBJECT-TYPE    
  NonReplicated  

lpFiLtCntlTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtCntlTopEntry

lpFiLtCntlTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.6.10.1
An entry in the lpFiLtCntlTopTable.
OBJECT-TYPE    
  LpFiLtCntlTopEntry  

lpFiLtCntlTData 1.3.6.1.4.1.562.2.4.1.12.4.2.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiLtTopTable 1.3.6.1.4.1.562.2.4.1.12.4.2.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiLtTopEntry

lpFiLtTopEntry 1.3.6.1.4.1.562.2.4.1.12.4.2.20.1
An entry in the lpFiLtTopTable.
OBJECT-TYPE    
  LpFiLtTopEntry  

lpFiLtTData 1.3.6.1.4.1.562.2.4.1.12.4.2.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpFiPhy 1.3.6.1.4.1.562.2.4.1.12.4.3
OBJECT IDENTIFIER    

lpFiPhyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.3.1
This entry controls the addition and deletion of lpFiPhy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiPhyRowStatusEntry

lpFiPhyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.3.1.1
A single entry in the table represents a single lpFiPhy component.
OBJECT-TYPE    
  LpFiPhyRowStatusEntry  

lpFiPhyRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.1
This variable is used as the basis for SNMP naming of lpFiPhy components. These components can be added.
OBJECT-TYPE    
  RowStatus  

lpFiPhyComponentName 1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiPhyStorageType 1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.4
This variable represents the storage type value for the lpFiPhy tables.
OBJECT-TYPE    
  StorageType  

lpFiPhyFddiPhyTypeIndex 1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.10
This variable represents the index for the lpFiPhy tables.
OBJECT-TYPE    
  INTEGER a(0), b(1)  

lpFiPhyProvTable 1.3.6.1.4.1.562.2.4.1.12.4.3.10
This group contains the provisionable attributes of the Fddi Phy component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiPhyProvEntry

lpFiPhyProvEntry 1.3.6.1.4.1.562.2.4.1.12.4.3.10.1
An entry in the lpFiPhyProvTable.
OBJECT-TYPE    
  LpFiPhyProvEntry  

lpFiPhyLerCutoff 1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.1
The lerCutoff attribute contains the link error rate estimate at which a link connection will be broken. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported.
OBJECT-TYPE    
  Unsigned32 4..15  

lpFiPhyLerAlarm 1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.2
The lerAlarm attribute contains the link error rate estimate at which a link connection will generate an alarm. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported
OBJECT-TYPE    
  Unsigned32 4..15  

lpFiPhyLinkErrorMonitor 1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.3
The linkErrorMonitor attribute is used to select the state of the link error monitor for the associated Phy component. If enabled, the link error monitor will send the correct test status to the neighboring station. If disabled, the link error monitor will always send a test passed status to the neighboring station.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiPhyOperTable 1.3.6.1.4.1.562.2.4.1.12.4.3.11
This group contains the operational attributes of the Fddi Phy component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiPhyOperEntry

lpFiPhyOperEntry 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1
An entry in the lpFiPhyOperTable.
OBJECT-TYPE    
  LpFiPhyOperEntry  

lpFiPhyNeighborType 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.4
This attribute indicates the neighbor type of the neighbor physical layer.
OBJECT-TYPE    
  INTEGER a(1), b(2), s(3), m(4), none(5)  

lpFiPhyLctFailCounts 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.13
The lctFailCounts attribute contains the number of consecutive times the Link Confidence Test (LCT) has failed. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiPhyLerEstimate 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.14
The lerEstimate attribute contains a long term average link error rate. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported
OBJECT-TYPE    
  Unsigned32 4..15  

lpFiPhyLemRejectCounts 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.15
The lemRejectCounts attribute contains the number of times that a link has been rejected. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiPhyLemCounts 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.16
The lemCounts attribute contains the aggregate link error monitor error count. This counter is set to zero only on station initialization. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiPhyPcmState 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.18
The pcmState, physical connection manager (PCM), state indicates the current state of the PCM state machine.
OBJECT-TYPE    
  INTEGER off(1), break(2), trace(3), connect(4), next(5), signal(6), join(7), verify(8), active(9), maint(10)  

lpFiPhyLerFlag 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.20
The lerFlag attribute indicates when the link error rate estimate is less than or equal to the link error rate alarm. If true, the value of the link error rate estimate is less than or equal to the link error rate alarm. If false, the value of the link error rate estimate is greater than the link error rate alarm.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpFiPhySignalState 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.23
The signalState attribute contains the current physical connection manager (PCM) signal bit being transmitted, or was transmitted, during the PCM signal state.
OBJECT-TYPE    
  INTEGER escape(0), phyTypeL(1), phyTypeH(2), accept(3), lctLengthL(4), lctLengthH(5), macAvail(6), lctResult(7), macLoop(8), macOnPhy(9), signalingDone(10)  

lpFiPhySignalBitsRcvd 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.24
The signalBitsRcvd attribute contains the current physical connection manager (PCM) signal bits received. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpFiPhySignalBitsTxmt 1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.25
The signalBitsTxmt attribute contains the current physical connection manager (PCM) signal bits transmitted. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpFiTest 1.3.6.1.4.1.562.2.4.1.12.4.5
OBJECT IDENTIFIER    

lpFiTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.5.1
This entry controls the addition and deletion of lpFiTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiTestRowStatusEntry

lpFiTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.5.1.1
A single entry in the table represents a single lpFiTest component.
OBJECT-TYPE    
  LpFiTestRowStatusEntry  

lpFiTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.1
This variable is used as the basis for SNMP naming of lpFiTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpFiTestComponentName 1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpFiTestStorageType 1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.4
This variable represents the storage type value for the lpFiTest tables.
OBJECT-TYPE    
  StorageType  

lpFiTestIndex 1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.10
This variable represents the index for the lpFiTest tables.
OBJECT-TYPE    
  NonReplicated  

lpFiTestPTOTable 1.3.6.1.4.1.562.2.4.1.12.4.5.10
This group contains the operational data for the LanPortTest component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiTestPTOEntry

lpFiTestPTOEntry 1.3.6.1.4.1.562.2.4.1.12.4.5.10.1
An entry in the lpFiTestPTOTable.
OBJECT-TYPE    
  LpFiTestPTOEntry  

lpFiTestType 1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.1
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors.
OBJECT-TYPE    
  INTEGER onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268)  

lpFiTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.2
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpFiTestDuration 1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.3
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpFiTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.4.5.11
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiTestResultsEntry

lpFiTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1
An entry in the lpFiTestResultsTable.
OBJECT-TYPE    
  LpFiTestResultsEntry  

lpFiTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.4
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpFiTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.5
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpFiTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.6
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4)  

lpFiTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.7
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpFiTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.8
This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpFiTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpFiTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.10
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpFiTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.11
This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpFiCidDataTable 1.3.6.1.4.1.562.2.4.1.12.4.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiCidDataEntry

lpFiCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.4.10.1
An entry in the lpFiCidDataTable.
OBJECT-TYPE    
  LpFiCidDataEntry  

lpFiCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.4.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpFiIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.4.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiIfEntryEntry

lpFiIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.4.11.1
An entry in the lpFiIfEntryTable.
OBJECT-TYPE    
  LpFiIfEntryEntry  

lpFiIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.4.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpFiIfIndex 1.3.6.1.4.1.562.2.4.1.12.4.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpFiSmtProvTable 1.3.6.1.4.1.562.2.4.1.12.4.12
This group contains the provisionable Station Management (SMT) attributes of the Fddi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiSmtProvEntry

lpFiSmtProvEntry 1.3.6.1.4.1.562.2.4.1.12.4.12.1
An entry in the lpFiSmtProvTable.
OBJECT-TYPE    
  LpFiSmtProvEntry  

lpFiUserData 1.3.6.1.4.1.562.2.4.1.12.4.12.1.1
The user data field is used to identify the FDDI interface on the ring. The user data contains a message with a maximum of 32 characters.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

lpFiAcceptAa 1.3.6.1.4.1.562.2.4.1.12.4.12.1.2
The acceptAa attribute defines the station type A to station type A connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiAcceptBb 1.3.6.1.4.1.562.2.4.1.12.4.12.1.3
The acceptBb attribute defines the station type B to station type B connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiAcceptAs 1.3.6.1.4.1.562.2.4.1.12.4.12.1.4
The acceptAs attribute defines the station type A to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiAcceptBs 1.3.6.1.4.1.562.2.4.1.12.4.12.1.5
The acceptBs attribute defines the station type B to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiAcceptAm 1.3.6.1.4.1.562.2.4.1.12.4.12.1.6
The acceptAm attribute defines the station type A to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiAcceptBm 1.3.6.1.4.1.562.2.4.1.12.4.12.1.7
The acceptBm attribute defines the station type B to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiUseThruBa 1.3.6.1.4.1.562.2.4.1.12.4.12.1.8
The useThruBa attribute is used to configure the requested path of the associated station. If enabled, only the secondary preferred path is permitted. If disabled, only the primary preferred path is permitted.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpFiNeighborNotifyInterval 1.3.6.1.4.1.562.2.4.1.12.4.12.1.10
The neighborNotifyInterval attribute contains the amount of time, expressed in seconds, between neighbor notification frames.
OBJECT-TYPE    
  Unsigned32 2..30  

lpFiStatusReportPolicy 1.3.6.1.4.1.562.2.4.1.12.4.12.1.11
The statusReportPolicy attribute indicates whether or not the station will generate status reporting frames for its implemented events and conditions. If true, the station will generate the status frames. If false, the station will not generate the status frames.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpFiTraceMaxExpirationTimer 1.3.6.1.4.1.562.2.4.1.12.4.12.1.12
The traceMaxExpirationTimer attribute is used to configure the maximum propagation time, expressed in milliseconds, for a trace on a FDDI topology. This value places a lower bound on the detection time for an unrecovered ring.
OBJECT-TYPE    
  FddiTimeMilli 0..1000000  

lpFiApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.4.12.1.13
This attribute contains the component name of a Framer which is associated with the Fddi component. This defines which LanApplication/n Framer will be using this Fddi interface.
OBJECT-TYPE    
  Link  

lpFiMacProvTable 1.3.6.1.4.1.562.2.4.1.12.4.13
This group contains the provisionable MAC attributes of the Fddi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiMacProvEntry

lpFiMacProvEntry 1.3.6.1.4.1.562.2.4.1.12.4.13.1
An entry in the lpFiMacProvTable.
OBJECT-TYPE    
  LpFiMacProvEntry  

lpFiTokenRequestTimer 1.3.6.1.4.1.562.2.4.1.12.4.13.1.1
The tokenRequestTimer value contains the token request value assigned to the associated medium access controller (MAC). Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute.
OBJECT-TYPE    
  FddiTimeNano 20480..1340000000  

lpFiTokenMaxTimer 1.3.6.1.4.1.562.2.4.1.12.4.13.1.2
The tokenMaxTimer value is the maximum timer value the negotiated token rotation time may assume. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute.
OBJECT-TYPE    
  FddiTimeNano 40960..1342200000  

lpFiValidTransmissionTimer 1.3.6.1.4.1.562.2.4.1.12.4.13.1.3
The validTransmissionTimer (Tvx) value specifies the amount of time required for a valid transmission. The station must receive a valid transmission once every Tvx. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute.
OBJECT-TYPE    
  FddiTimeNano 40960..1342200000  

lpFiAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.4.14
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiAdminInfoEntry

lpFiAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.4.14.1
An entry in the lpFiAdminInfoTable.
OBJECT-TYPE    
  LpFiAdminInfoEntry  

lpFiVendor 1.3.6.1.4.1.562.2.4.1.12.4.14.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpFiCommentText 1.3.6.1.4.1.562.2.4.1.12.4.14.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpFiStateTable 1.3.6.1.4.1.562.2.4.1.12.4.16
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiStateEntry

lpFiStateEntry 1.3.6.1.4.1.562.2.4.1.12.4.16.1
An entry in the lpFiStateTable.
OBJECT-TYPE    
  LpFiStateEntry  

lpFiAdminState 1.3.6.1.4.1.562.2.4.1.12.4.16.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpFiOperationalState 1.3.6.1.4.1.562.2.4.1.12.4.16.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpFiUsageState 1.3.6.1.4.1.562.2.4.1.12.4.16.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpFiOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.4.17
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiOperStatusEntry

lpFiOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.4.17.1
An entry in the lpFiOperStatusTable.
OBJECT-TYPE    
  LpFiOperStatusEntry  

lpFiSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.4.17.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpFiSmtOperTable 1.3.6.1.4.1.562.2.4.1.12.4.18
This group contains the operational station management (SMT) attributes of the Fddi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiSmtOperEntry

lpFiSmtOperEntry 1.3.6.1.4.1.562.2.4.1.12.4.18.1
An entry in the lpFiSmtOperTable.
OBJECT-TYPE    
  LpFiSmtOperEntry  

lpFiVersion 1.3.6.1.4.1.562.2.4.1.12.4.18.1.1
The version attribute contains a copy of the currently supported version numbers of the management information base (MIB) and the station management (SMT).
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

lpFiBypassPresent 1.3.6.1.4.1.562.2.4.1.12.4.18.1.14
The bypassPresent attribute indicates whether the optical bypass switch is present on its AB port pair. If true, the optical bypass switch is present. If false, it is not present.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpFiEcmState 1.3.6.1.4.1.562.2.4.1.12.4.18.1.15
The ecmState, Entity Coordination Manager (ECM), state indicates the current state of the ECM state machine.
OBJECT-TYPE    
  INTEGER out(1), in(2), trace(3), leave(4), pathTest(5), insert(6), check(7), deinsert(8)  

lpFiCfState 1.3.6.1.4.1.562.2.4.1.12.4.18.1.16
The cfState attribute indicates the current state of the configuration management (CFM) state machine.
OBJECT-TYPE    
  INTEGER isolated(1), localA(2), localB(3), localAB(4), localS(5), wrapA(6), wrapB(7), wrapAB(8), wrapS(9), cWrapA(10), cWrapB(11), cWrapS(12), thru(13)  

lpFiMacOperTable 1.3.6.1.4.1.562.2.4.1.12.4.19
This group contains the operational Medium Access Controller (MAC) attributes of the of the Fddi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiMacOperEntry

lpFiMacOperEntry 1.3.6.1.4.1.562.2.4.1.12.4.19.1
An entry in the lpFiMacOperTable.
OBJECT-TYPE    
  LpFiMacOperEntry  

lpFiRingLatency 1.3.6.1.4.1.562.2.4.1.12.4.19.1.1
The ringLatency attribute contains the measured ring latency of the ring the station is attached to.
OBJECT-TYPE    
  Gauge32 1280..1342000000  

lpFiMacAddress 1.3.6.1.4.1.562.2.4.1.12.4.19.1.10
The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncMacAddress.
OBJECT-TYPE    
  FddiMACLongAddressType SIZE(6)  

lpFiUpstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.19.1.11
The upstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncUpstreamNeighbor.
OBJECT-TYPE    
  FddiMACLongAddressType SIZE(6)  

lpFiDownstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.19.1.12
The downstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncDownstreamNeighbor.
OBJECT-TYPE    
  FddiMACLongAddressType SIZE(6)  

lpFiOldUpstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.19.1.13
The oldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldUpstreamNeighbor.
OBJECT-TYPE    
  FddiMACLongAddressType SIZE(6)  

lpFiOldDownstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.19.1.14
The oldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldDownstreamNeighbor.
OBJECT-TYPE    
  FddiMACLongAddressType SIZE(6)  

lpFiDupAddressTest 1.3.6.1.4.1.562.2.4.1.12.4.19.1.15
The dupAddressTest attribute indicates the condition results of the duplicate address test. If notDone, the test has not been executed. If pass, the test has successfully executed. If fail, the test has failed.
OBJECT-TYPE    
  INTEGER notDone(1), pass(2), fail(3)  

lpFiTokenNegotiatedTimer 1.3.6.1.4.1.562.2.4.1.12.4.19.1.18
The tokenNegotiatedTimer specifies the negotiated token rotation time.
OBJECT-TYPE    
  FddiTimeNano 80..1340000000  

lpFiFrameCounts 1.3.6.1.4.1.562.2.4.1.12.4.19.1.19
The frameCounts attribute contains the number of frames that have been received by the station. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiCopiedCounts 1.3.6.1.4.1.562.2.4.1.12.4.19.1.20
The copiedCounts attribute contains the number of frames successfully copied into this station's receive buffers, not including MAC control frames. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiTransmitCounts 1.3.6.1.4.1.562.2.4.1.12.4.19.1.21
The transmitCounts attribute contains the number of frames transmitted by this station, not including MAC control frames. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiErrorCounts 1.3.6.1.4.1.562.2.4.1.12.4.19.1.22
The errorCounts attribute contains the number of error frames first detected by this station. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiLostCounts 1.3.6.1.4.1.562.2.4.1.12.4.19.1.23
The lostCounts attribute contains the number of instances that the station has detected a format error during frame reception such that the frame was stripped. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiRmtState 1.3.6.1.4.1.562.2.4.1.12.4.19.1.25
The rmtState, ring management (RMT), state indicates the current state of the RMT state machine.
OBJECT-TYPE    
  INTEGER isolated(1), nonOp(2), ringOp(3), detect(4), nonOpDup(5), ringOpDup(6), directed(7), trace(8)  

lpFiFrameErrorFlag 1.3.6.1.4.1.562.2.4.1.12.4.19.1.28
The frameErrorFlag attribute indicates the MAC frame error condition status. If true, a MAC frame error is present. If false, a MAC frame error condition is not present.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpFiMacCOperTable 1.3.6.1.4.1.562.2.4.1.12.4.20
This group contains the operational attributes of the Medium Access Controller (MAC) Counters Table of the Fddi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiMacCOperEntry

lpFiMacCOperEntry 1.3.6.1.4.1.562.2.4.1.12.4.20.1
An entry in the lpFiMacCOperTable.
OBJECT-TYPE    
  LpFiMacCOperEntry  

lpFiTokenCounts 1.3.6.1.4.1.562.2.4.1.12.4.20.1.1
The tokenCounts attribute contains the number of times the station has received a token. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiTvxExpiredCounts 1.3.6.1.4.1.562.2.4.1.12.4.20.1.2
The tvxExpiredCounts, Transmission Valid eXpired (TVX), attribute contains the number of times that TVX timer has expired. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiNotCopiedCounts 1.3.6.1.4.1.562.2.4.1.12.4.20.1.3
The notCopiedCounts attribute contains the number of times that the station has detected a frame addressed to itself but did not copy it due to local buffer congestion. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiLateCounts 1.3.6.1.4.1.562.2.4.1.12.4.20.1.4
The lateCounts attribute contains the number of token rotation time (TRT) expirations since the station was reset or a token was received. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpFiRingOpCounts 1.3.6.1.4.1.562.2.4.1.12.4.20.1.5
The ringOpCounts attribute contains the number of times the station has made the transition from the ring not operational state to the ring operational state.
OBJECT-TYPE    
  Counter32  

lpFiNcMacOperTable 1.3.6.1.4.1.562.2.4.1.12.4.26
This group contains the operational attributes of the Fddi component related to non-canonical MAC addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFiNcMacOperEntry

lpFiNcMacOperEntry 1.3.6.1.4.1.562.2.4.1.12.4.26.1
An entry in the lpFiNcMacOperTable.
OBJECT-TYPE    
  LpFiNcMacOperEntry  

lpFiNcMacAddress 1.3.6.1.4.1.562.2.4.1.12.4.26.1.1
The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in non- canonical format. The canonical version of this address is indicated in macAddress.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpFiNcUpstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.26.1.2
The ncUpstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in upstreamNeighbor.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpFiNcDownstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.26.1.3
The ncDownstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in downstreamNeighbor
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpFiNcOldUpstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.26.1.4
The ncOldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldUpstreamNeighbor.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpFiNcOldDownstreamNeighbor 1.3.6.1.4.1.562.2.4.1.12.4.26.1.5
The ncOldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldDownstreamNeighbor.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTr 1.3.6.1.4.1.562.2.4.1.12.13
OBJECT IDENTIFIER    

lpTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.1
This entry controls the addition and deletion of lpTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrRowStatusEntry

lpTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.1.1
A single entry in the table represents a single lpTr component.
OBJECT-TYPE    
  LpTrRowStatusEntry  

lpTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.1.1.1
This variable is used as the basis for SNMP naming of lpTr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpTrComponentName 1.3.6.1.4.1.562.2.4.1.12.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrStorageType 1.3.6.1.4.1.562.2.4.1.12.13.1.1.4
This variable represents the storage type value for the lpTr tables.
OBJECT-TYPE    
  StorageType  

lpTrIndex 1.3.6.1.4.1.562.2.4.1.12.13.1.1.10
This variable represents the index for the lpTr tables.
OBJECT-TYPE    
  Integer32 0..5  

lpTrLt 1.3.6.1.4.1.562.2.4.1.12.13.2
OBJECT IDENTIFIER    

lpTrLtRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.1
This entry controls the addition and deletion of lpTrLt components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtRowStatusEntry

lpTrLtRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.1.1
A single entry in the table represents a single lpTrLt component.
OBJECT-TYPE    
  LpTrLtRowStatusEntry  

lpTrLtRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.1
This variable is used as the basis for SNMP naming of lpTrLt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.4
This variable represents the storage type value for the lpTrLt tables.
OBJECT-TYPE    
  StorageType  

lpTrLtIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.10
This variable represents the index for the lpTrLt tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFrmCmp 1.3.6.1.4.1.562.2.4.1.12.13.2.2
OBJECT IDENTIFIER    

lpTrLtFrmCmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1
This entry controls the addition and deletion of lpTrLtFrmCmp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFrmCmpRowStatusEntry

lpTrLtFrmCmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1
A single entry in the table represents a single lpTrLtFrmCmp component.
OBJECT-TYPE    
  LpTrLtFrmCmpRowStatusEntry  

lpTrLtFrmCmpRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFrmCmp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFrmCmpComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFrmCmpStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.4
This variable represents the storage type value for the lpTrLtFrmCmp tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFrmCmpIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.10
This variable represents the index for the lpTrLtFrmCmp tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFrmCmpTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFrmCmpTopEntry

lpTrLtFrmCmpTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.2.10.1
An entry in the lpTrLtFrmCmpTopTable.
OBJECT-TYPE    
  LpTrLtFrmCmpTopEntry  

lpTrLtFrmCmpTData 1.3.6.1.4.1.562.2.4.1.12.13.2.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFrmCpy 1.3.6.1.4.1.562.2.4.1.12.13.2.3
OBJECT IDENTIFIER    

lpTrLtFrmCpyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1
This entry controls the addition and deletion of lpTrLtFrmCpy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFrmCpyRowStatusEntry

lpTrLtFrmCpyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1
A single entry in the table represents a single lpTrLtFrmCpy component.
OBJECT-TYPE    
  LpTrLtFrmCpyRowStatusEntry  

lpTrLtFrmCpyRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFrmCpy components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFrmCpyComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFrmCpyStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.4
This variable represents the storage type value for the lpTrLtFrmCpy tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFrmCpyIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.10
This variable represents the index for the lpTrLtFrmCpy tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFrmCpyTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFrmCpyTopEntry

lpTrLtFrmCpyTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.3.10.1
An entry in the lpTrLtFrmCpyTopTable.
OBJECT-TYPE    
  LpTrLtFrmCpyTopEntry  

lpTrLtFrmCpyTData 1.3.6.1.4.1.562.2.4.1.12.13.2.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtPrtCfg 1.3.6.1.4.1.562.2.4.1.12.13.2.4
OBJECT IDENTIFIER    

lpTrLtPrtCfgRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1
This entry controls the addition and deletion of lpTrLtPrtCfg components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtPrtCfgRowStatusEntry

lpTrLtPrtCfgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1
A single entry in the table represents a single lpTrLtPrtCfg component.
OBJECT-TYPE    
  LpTrLtPrtCfgRowStatusEntry  

lpTrLtPrtCfgRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtPrtCfg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtPrtCfgComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtPrtCfgStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.4
This variable represents the storage type value for the lpTrLtPrtCfg tables.
OBJECT-TYPE    
  StorageType  

lpTrLtPrtCfgIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.10
This variable represents the index for the lpTrLtPrtCfg tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtPrtCfgTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtPrtCfgTopEntry

lpTrLtPrtCfgTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.4.10.1
An entry in the lpTrLtPrtCfgTopTable.
OBJECT-TYPE    
  LpTrLtPrtCfgTopEntry  

lpTrLtPrtCfgTData 1.3.6.1.4.1.562.2.4.1.12.13.2.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFb 1.3.6.1.4.1.562.2.4.1.12.13.2.5
OBJECT IDENTIFIER    

lpTrLtFbRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1
This entry controls the addition and deletion of lpTrLtFb components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbRowStatusEntry

lpTrLtFbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1
A single entry in the table represents a single lpTrLtFb component.
OBJECT-TYPE    
  LpTrLtFbRowStatusEntry  

lpTrLtFbRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.4
This variable represents the storage type value for the lpTrLtFb tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.10
This variable represents the index for the lpTrLtFb tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbTxInfo 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2
OBJECT IDENTIFIER    

lpTrLtFbTxInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1
This entry controls the addition and deletion of lpTrLtFbTxInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbTxInfoRowStatusEntry

lpTrLtFbTxInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1
A single entry in the table represents a single lpTrLtFbTxInfo component.
OBJECT-TYPE    
  LpTrLtFbTxInfoRowStatusEntry  

lpTrLtFbTxInfoRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbTxInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbTxInfoComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbTxInfoStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.4
This variable represents the storage type value for the lpTrLtFbTxInfo tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbTxInfoIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.10
This variable represents the index for the lpTrLtFbTxInfo tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbTxInfoTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbTxInfoTopEntry

lpTrLtFbTxInfoTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10.1
An entry in the lpTrLtFbTxInfoTopTable.
OBJECT-TYPE    
  LpTrLtFbTxInfoTopEntry  

lpTrLtFbTxInfoTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbFddiMac 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3
OBJECT IDENTIFIER    

lpTrLtFbFddiMacRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1
This entry controls the addition and deletion of lpTrLtFbFddiMac components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbFddiMacRowStatusEntry

lpTrLtFbFddiMacRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1
A single entry in the table represents a single lpTrLtFbFddiMac component.
OBJECT-TYPE    
  LpTrLtFbFddiMacRowStatusEntry  

lpTrLtFbFddiMacRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbFddiMac components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbFddiMacComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbFddiMacStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.4
This variable represents the storage type value for the lpTrLtFbFddiMac tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbFddiMacIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.10
This variable represents the index for the lpTrLtFbFddiMac tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbFddiMacTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbFddiMacTopEntry

lpTrLtFbFddiMacTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10.1
An entry in the lpTrLtFbFddiMacTopTable.
OBJECT-TYPE    
  LpTrLtFbFddiMacTopEntry  

lpTrLtFbFddiMacTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbMacEnet 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4
OBJECT IDENTIFIER    

lpTrLtFbMacEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1
This entry controls the addition and deletion of lpTrLtFbMacEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbMacEnetRowStatusEntry

lpTrLtFbMacEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1
A single entry in the table represents a single lpTrLtFbMacEnet component.
OBJECT-TYPE    
  LpTrLtFbMacEnetRowStatusEntry  

lpTrLtFbMacEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbMacEnet components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbMacEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbMacEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.4
This variable represents the storage type value for the lpTrLtFbMacEnet tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbMacEnetIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.10
This variable represents the index for the lpTrLtFbMacEnet tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbMacEnetTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbMacEnetTopEntry

lpTrLtFbMacEnetTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10.1
An entry in the lpTrLtFbMacEnetTopTable.
OBJECT-TYPE    
  LpTrLtFbMacEnetTopEntry  

lpTrLtFbMacEnetTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbMacTr 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5
OBJECT IDENTIFIER    

lpTrLtFbMacTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1
This entry controls the addition and deletion of lpTrLtFbMacTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbMacTrRowStatusEntry

lpTrLtFbMacTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1
A single entry in the table represents a single lpTrLtFbMacTr component.
OBJECT-TYPE    
  LpTrLtFbMacTrRowStatusEntry  

lpTrLtFbMacTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbMacTr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbMacTrComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbMacTrStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.4
This variable represents the storage type value for the lpTrLtFbMacTr tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbMacTrIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.10
This variable represents the index for the lpTrLtFbMacTr tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbMacTrTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbMacTrTopEntry

lpTrLtFbMacTrTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10.1
An entry in the lpTrLtFbMacTrTopTable.
OBJECT-TYPE    
  LpTrLtFbMacTrTopEntry  

lpTrLtFbMacTrTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6
OBJECT IDENTIFIER    

lpTrLtFbDataRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1
This entry controls the addition and deletion of lpTrLtFbData components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbDataRowStatusEntry

lpTrLtFbDataRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1
A single entry in the table represents a single lpTrLtFbData component.
OBJECT-TYPE    
  LpTrLtFbDataRowStatusEntry  

lpTrLtFbDataRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbData components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbDataComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbDataStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.4
This variable represents the storage type value for the lpTrLtFbData tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbDataIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.10
This variable represents the index for the lpTrLtFbData tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbDataTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbDataTopEntry

lpTrLtFbDataTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10.1
An entry in the lpTrLtFbDataTopTable.
OBJECT-TYPE    
  LpTrLtFbDataTopEntry  

lpTrLtFbDataTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbIpH 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7
OBJECT IDENTIFIER    

lpTrLtFbIpHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1
This entry controls the addition and deletion of lpTrLtFbIpH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbIpHRowStatusEntry

lpTrLtFbIpHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1
A single entry in the table represents a single lpTrLtFbIpH component.
OBJECT-TYPE    
  LpTrLtFbIpHRowStatusEntry  

lpTrLtFbIpHRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbIpH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbIpHComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbIpHStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.4
This variable represents the storage type value for the lpTrLtFbIpH tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbIpHIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.10
This variable represents the index for the lpTrLtFbIpH tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbIpHTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbIpHTopEntry

lpTrLtFbIpHTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10.1
An entry in the lpTrLtFbIpHTopTable.
OBJECT-TYPE    
  LpTrLtFbIpHTopEntry  

lpTrLtFbIpHTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbLlch 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8
OBJECT IDENTIFIER    

lpTrLtFbLlchRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1
This entry controls the addition and deletion of lpTrLtFbLlch components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbLlchRowStatusEntry

lpTrLtFbLlchRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1
A single entry in the table represents a single lpTrLtFbLlch component.
OBJECT-TYPE    
  LpTrLtFbLlchRowStatusEntry  

lpTrLtFbLlchRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbLlch components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbLlchComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbLlchStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.4
This variable represents the storage type value for the lpTrLtFbLlch tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbLlchIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.10
This variable represents the index for the lpTrLtFbLlch tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbLlchTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbLlchTopEntry

lpTrLtFbLlchTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10.1
An entry in the lpTrLtFbLlchTopTable.
OBJECT-TYPE    
  LpTrLtFbLlchTopEntry  

lpTrLtFbLlchTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbAppleH 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9
OBJECT IDENTIFIER    

lpTrLtFbAppleHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1
This entry controls the addition and deletion of lpTrLtFbAppleH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbAppleHRowStatusEntry

lpTrLtFbAppleHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1
A single entry in the table represents a single lpTrLtFbAppleH component.
OBJECT-TYPE    
  LpTrLtFbAppleHRowStatusEntry  

lpTrLtFbAppleHRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbAppleH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbAppleHComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbAppleHStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.4
This variable represents the storage type value for the lpTrLtFbAppleH tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbAppleHIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.10
This variable represents the index for the lpTrLtFbAppleH tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbAppleHTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbAppleHTopEntry

lpTrLtFbAppleHTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10.1
An entry in the lpTrLtFbAppleHTopTable.
OBJECT-TYPE    
  LpTrLtFbAppleHTopEntry  

lpTrLtFbAppleHTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbIpxH 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10
OBJECT IDENTIFIER    

lpTrLtFbIpxHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1
This entry controls the addition and deletion of lpTrLtFbIpxH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbIpxHRowStatusEntry

lpTrLtFbIpxHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1
A single entry in the table represents a single lpTrLtFbIpxH component.
OBJECT-TYPE    
  LpTrLtFbIpxHRowStatusEntry  

lpTrLtFbIpxHRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtFbIpxH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtFbIpxHComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtFbIpxHStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.4
This variable represents the storage type value for the lpTrLtFbIpxH tables.
OBJECT-TYPE    
  StorageType  

lpTrLtFbIpxHIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.10
This variable represents the index for the lpTrLtFbIpxH tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtFbIpxHTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbIpxHTopEntry

lpTrLtFbIpxHTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10.1
An entry in the lpTrLtFbIpxHTopTable.
OBJECT-TYPE    
  LpTrLtFbIpxHTopEntry  

lpTrLtFbIpxHTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtFbTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.5.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtFbTopEntry

lpTrLtFbTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.5.20.1
An entry in the lpTrLtFbTopTable.
OBJECT-TYPE    
  LpTrLtFbTopEntry  

lpTrLtFbTData 1.3.6.1.4.1.562.2.4.1.12.13.2.5.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtCntl 1.3.6.1.4.1.562.2.4.1.12.13.2.6
OBJECT IDENTIFIER    

lpTrLtCntlRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1
This entry controls the addition and deletion of lpTrLtCntl components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtCntlRowStatusEntry

lpTrLtCntlRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1
A single entry in the table represents a single lpTrLtCntl component.
OBJECT-TYPE    
  LpTrLtCntlRowStatusEntry  

lpTrLtCntlRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.1
This variable is used as the basis for SNMP naming of lpTrLtCntl components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrLtCntlComponentName 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrLtCntlStorageType 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.4
This variable represents the storage type value for the lpTrLtCntl tables.
OBJECT-TYPE    
  StorageType  

lpTrLtCntlIndex 1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.10
This variable represents the index for the lpTrLtCntl tables.
OBJECT-TYPE    
  NonReplicated  

lpTrLtCntlTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtCntlTopEntry

lpTrLtCntlTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.6.10.1
An entry in the lpTrLtCntlTopTable.
OBJECT-TYPE    
  LpTrLtCntlTopEntry  

lpTrLtCntlTData 1.3.6.1.4.1.562.2.4.1.12.13.2.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrLtTopTable 1.3.6.1.4.1.562.2.4.1.12.13.2.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrLtTopEntry

lpTrLtTopEntry 1.3.6.1.4.1.562.2.4.1.12.13.2.20.1
An entry in the lpTrLtTopTable.
OBJECT-TYPE    
  LpTrLtTopEntry  

lpTrLtTData 1.3.6.1.4.1.562.2.4.1.12.13.2.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpTrTest 1.3.6.1.4.1.562.2.4.1.12.13.5
OBJECT IDENTIFIER    

lpTrTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.5.1
This entry controls the addition and deletion of lpTrTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrTestRowStatusEntry

lpTrTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.5.1.1
A single entry in the table represents a single lpTrTest component.
OBJECT-TYPE    
  LpTrTestRowStatusEntry  

lpTrTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.1
This variable is used as the basis for SNMP naming of lpTrTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpTrTestComponentName 1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpTrTestStorageType 1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.4
This variable represents the storage type value for the lpTrTest tables.
OBJECT-TYPE    
  StorageType  

lpTrTestIndex 1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.10
This variable represents the index for the lpTrTest tables.
OBJECT-TYPE    
  NonReplicated  

lpTrTestPTOTable 1.3.6.1.4.1.562.2.4.1.12.13.5.10
This group contains the operational data for the LanPortTest component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrTestPTOEntry

lpTrTestPTOEntry 1.3.6.1.4.1.562.2.4.1.12.13.5.10.1
An entry in the lpTrTestPTOTable.
OBJECT-TYPE    
  LpTrTestPTOEntry  

lpTrTestType 1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.1
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors.
OBJECT-TYPE    
  INTEGER onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268)  

lpTrTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.2
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpTrTestDuration 1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.3
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpTrTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.13.5.11
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrTestResultsEntry

lpTrTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1
An entry in the lpTrTestResultsTable.
OBJECT-TYPE    
  LpTrTestResultsEntry  

lpTrTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.4
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpTrTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.5
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpTrTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.6
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4)  

lpTrTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.7
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpTrTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.8
This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpTrTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpTrTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.10
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpTrTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.11
This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpTrCidDataTable 1.3.6.1.4.1.562.2.4.1.12.13.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrCidDataEntry

lpTrCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.13.10.1
An entry in the lpTrCidDataTable.
OBJECT-TYPE    
  LpTrCidDataEntry  

lpTrCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.13.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpTrIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.13.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrIfEntryEntry

lpTrIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.13.11.1
An entry in the lpTrIfEntryTable.
OBJECT-TYPE    
  LpTrIfEntryEntry  

lpTrIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.13.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpTrIfIndex 1.3.6.1.4.1.562.2.4.1.12.13.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpTrProvTable 1.3.6.1.4.1.562.2.4.1.12.13.12
This group contains the provisionable attributes of the Token Ring port.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrProvEntry

lpTrProvEntry 1.3.6.1.4.1.562.2.4.1.12.13.12.1
An entry in the lpTrProvTable.
OBJECT-TYPE    
  LpTrProvEntry  

lpTrRingSpeed 1.3.6.1.4.1.562.2.4.1.12.13.12.1.1
This attribute indicates the ring speed at the next insertion into the ring. Note that all the interfaces on a ring must operate at the same speed.
OBJECT-TYPE    
  INTEGER fourMegabit(3), sixteenMegabit(4)  

lpTrMonitorParticipate 1.3.6.1.4.1.562.2.4.1.12.13.12.1.2
This attribute determines whether the interface will participate in the active monitor selection process.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpTrFunctionalAddress 1.3.6.1.4.1.562.2.4.1.12.13.12.1.3
This attribute contains a bit mask of all token ring functional addresses for which this interface will accept frames. The address is displayed in canonical form.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrNodeAddress 1.3.6.1.4.1.562.2.4.1.12.13.12.1.4
This attribute identifies the primary, node specific address recognized by this interface. If an operator does not provision a MAC address, the interface will use a predefined, permanently assigned address. A valid node address must not be any of the following: a broadcast address, a group address, a functional address or a null address. A node address should be entered in the canonical form.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrGroupAddress 1.3.6.1.4.1.562.2.4.1.12.13.12.1.5
This attribute identifies the group address for which this interface will accept frames. The address is displayed in canonical form. For a valid group address, the least significant bit of the first octet should be set to 1. Currently, only one group address can be provisioned for one interface.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrProductId 1.3.6.1.4.1.562.2.4.1.12.13.12.1.6
This attribute is used to identify the host system attached to this interface. This information is transmitted in response to Request Station Attachment MAC frames.
OBJECT-TYPE    
  AsciiString SIZE(0..18)  

lpTrApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.13.12.1.7
This attribute contains the component name of a Framer which is associated with the Tr component.
OBJECT-TYPE    
  Link  

lpTrAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.13.13
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrAdminInfoEntry

lpTrAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.13.13.1
An entry in the lpTrAdminInfoTable.
OBJECT-TYPE    
  LpTrAdminInfoEntry  

lpTrVendor 1.3.6.1.4.1.562.2.4.1.12.13.13.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpTrCommentText 1.3.6.1.4.1.562.2.4.1.12.13.13.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpTrStateTable 1.3.6.1.4.1.562.2.4.1.12.13.15
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrStateEntry

lpTrStateEntry 1.3.6.1.4.1.562.2.4.1.12.13.15.1
An entry in the lpTrStateTable.
OBJECT-TYPE    
  LpTrStateEntry  

lpTrAdminState 1.3.6.1.4.1.562.2.4.1.12.13.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpTrOperationalState 1.3.6.1.4.1.562.2.4.1.12.13.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpTrUsageState 1.3.6.1.4.1.562.2.4.1.12.13.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpTrOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.13.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrOperStatusEntry

lpTrOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.13.16.1
An entry in the lpTrOperStatusTable.
OBJECT-TYPE    
  LpTrOperStatusEntry  

lpTrSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.13.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpTrOperTable 1.3.6.1.4.1.562.2.4.1.12.13.17
This group contains the operational attributes of the Token Ring component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrOperEntry

lpTrOperEntry 1.3.6.1.4.1.562.2.4.1.12.13.17.1
An entry in the lpTrOperTable.
OBJECT-TYPE    
  LpTrOperEntry  

lpTrMacAddress 1.3.6.1.4.1.562.2.4.1.12.13.17.1.2
This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in canonical form. The non-canonical version of this address is indicated in ncMacAddress.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrRingState 1.3.6.1.4.1.562.2.4.1.12.13.17.1.4
This attribute contains the value of the current interface state with respect to entering or leaving the ring.
OBJECT-TYPE    
  INTEGER opened(1), closed(2), opening(3), closing(4), openFailure(5), ringFailure(6)  

lpTrRingStatus 1.3.6.1.4.1.562.2.4.1.12.13.17.1.5
This attribute contains the value of the current interface status after the station has entered the ring. The value is a sum of values, one for each currently applicable condition. Before the station attempts an open this attribute has the value of noStatus. noProblems = 0, ringRecovery = 32, singleStation = 64, removeReceived = 256, reserved = 512, autoRemovalError = 1024, lobeWireFault = 2048, transmitBeacon = 4096, softError = 8192, hardError = 16384, signalLoss = 32768, noStatus = 131072 Description of bits: noProblems(0) notused1(1) notused2(2) notused3(3) notused4(4) ringRecovery(5) singleStation(6) notused7(7) removeReceived(8) reserved(9) autoRemovalError(10) lobeWireFault(11) transmitBeacon(12) softError(13) hardError(14) signalLoss(15) notused16(16) noStatus(17)
OBJECT-TYPE    
  OCTET STRING SIZE(3)  

lpTrRingOpenStatus 1.3.6.1.4.1.562.2.4.1.12.13.17.1.6
This attribute indicates what happened the last time the station attempted to enter into the ring.
OBJECT-TYPE    
  INTEGER noOpen(1), badParam(2), lobeFailed(3), signalLoss(4), insertionTimeout(5), ringFailed(6), beaconing(7), duplicateMac(8), requestFailed(9), removeReceived(10), open(11)  

lpTrUpStream 1.3.6.1.4.1.562.2.4.1.12.13.17.1.7
This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in canonical form. The non- canonical version of this address is indicated in ncUpStream.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrChipSet 1.3.6.1.4.1.562.2.4.1.12.13.17.1.9
This attribute identifies the hardware chip set in use by an interface.
OBJECT-TYPE    
  INTEGER ibm16(1), titms380(2), titms380c16(3), titms380c26(4)  

lpTrLastTimeBeaconSent 1.3.6.1.4.1.562.2.4.1.12.13.17.1.10
This attribute indicates the time at which a Beacon frame was last transmitted on this interface.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

lpTrStatsTable 1.3.6.1.4.1.562.2.4.1.12.13.18
This group contains statistical information for the Token Ring port.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrStatsEntry

lpTrStatsEntry 1.3.6.1.4.1.562.2.4.1.12.13.18.1
An entry in the lpTrStatsTable.
OBJECT-TYPE    
  LpTrStatsEntry  

lpTrLineErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.2
This attribute contains the number of frames or tokens copied or repeated by a station where there is a non-data bit or a FCS error. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrBurstErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.3
This attribute contains the number of times the station detects the absence of transitions for five consecutive half-bit times. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrAcErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.4
This attribute contains the number of times that a station can not set the AC bits properly. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrAbortTransErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.5
This attribute contains the number of aborted frames. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrInternalErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.6
This attribute contains the number of internal errors. When the value of the counter soars up quickly, it indicates a potential hardware problem. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrLostFrameErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.7
This attribute contains the number of times a station is transmitting and its TRR timer expires. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrReceiveCongestions 1.3.6.1.4.1.562.2.4.1.12.13.18.1.8
This attribute contains the number of times a station is supposed to receive a frame but cannot due to lack of buffer space. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrFrameCopiedErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.9
This attribute contains the number of times a station receives a frame addressed to its specific address and detects that the A bit is set. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrTokenErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.10
This attribute contains the number of times a station acting as the active monitor recognizes an error condition that needs a token transmission. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrSoftErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.11
This attribute contains the number of soft errors or the number of Report Error Mac frames the station has transmitted. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrHardErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.12
This attribute contains the number of times this interface has detected an immediately recoverable fatal error. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrSignalLoss 1.3.6.1.4.1.562.2.4.1.12.13.18.1.13
This attribute contains the number of times signal condition has been lost. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrTransmitBeacons 1.3.6.1.4.1.562.2.4.1.12.13.18.1.14
This attribute contains the number of beacon frames transmitted. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrRingRecoverys 1.3.6.1.4.1.562.2.4.1.12.13.18.1.15
This attribute contains the number of times the ring has been purged. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrLobeWires 1.3.6.1.4.1.562.2.4.1.12.13.18.1.16
This attribute contains the number of times the interface has detected a short circuit in the lobe data path. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrRemoveRings 1.3.6.1.4.1.562.2.4.1.12.13.18.1.17
This attribute contains the number of Remove Ring Station Mac frames received. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrSingleStation 1.3.6.1.4.1.562.2.4.1.12.13.18.1.18
This attribute contains the number of times the station has determined it is the only one on the ring. This is not necessarily an error. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrFreqErrors 1.3.6.1.4.1.562.2.4.1.12.13.18.1.19
This attribute contains the number of signal frequency errors detected. This counter wraps around when the maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpTrNcMacOperTable 1.3.6.1.4.1.562.2.4.1.12.13.20
This group contains the operational attributes of the TokenRing port component related to non-canonical MAC addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrNcMacOperEntry

lpTrNcMacOperEntry 1.3.6.1.4.1.562.2.4.1.12.13.20.1
An entry in the lpTrNcMacOperTable.
OBJECT-TYPE    
  LpTrNcMacOperEntry  

lpTrNcMacAddress 1.3.6.1.4.1.562.2.4.1.12.13.20.1.1
This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in non-canonical form. The canonical version of this address is indicated in macAddress.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpTrNcUpStream 1.3.6.1.4.1.562.2.4.1.12.13.20.1.2
This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in non-canonical form. The canonical version of this address is indicated in upStream.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpIlsFwdr 1.3.6.1.4.1.562.2.4.1.12.21
OBJECT IDENTIFIER    

lpIlsFwdrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.1
This entry controls the addition and deletion of lpIlsFwdr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrRowStatusEntry

lpIlsFwdrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.1.1
A single entry in the table represents a single lpIlsFwdr component.
OBJECT-TYPE    
  LpIlsFwdrRowStatusEntry  

lpIlsFwdrRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrComponentName 1.3.6.1.4.1.562.2.4.1.12.21.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrStorageType 1.3.6.1.4.1.562.2.4.1.12.21.1.1.4
This variable represents the storage type value for the lpIlsFwdr tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrIndex 1.3.6.1.4.1.562.2.4.1.12.21.1.1.10
This variable represents the index for the lpIlsFwdr tables.
OBJECT-TYPE    
  Integer32 0  

lpIlsFwdrLt 1.3.6.1.4.1.562.2.4.1.12.21.2
OBJECT IDENTIFIER    

lpIlsFwdrLtRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.1
This entry controls the addition and deletion of lpIlsFwdrLt components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtRowStatusEntry

lpIlsFwdrLtRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.1.1
A single entry in the table represents a single lpIlsFwdrLt component.
OBJECT-TYPE    
  LpIlsFwdrLtRowStatusEntry  

lpIlsFwdrLtRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.4
This variable represents the storage type value for the lpIlsFwdrLt tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.10
This variable represents the index for the lpIlsFwdrLt tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFrmCmp 1.3.6.1.4.1.562.2.4.1.12.21.2.2
OBJECT IDENTIFIER    

lpIlsFwdrLtFrmCmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1
This entry controls the addition and deletion of lpIlsFwdrLtFrmCmp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFrmCmpRowStatusEntry

lpIlsFwdrLtFrmCmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1
A single entry in the table represents a single lpIlsFwdrLtFrmCmp component.
OBJECT-TYPE    
  LpIlsFwdrLtFrmCmpRowStatusEntry  

lpIlsFwdrLtFrmCmpRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFrmCmp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFrmCmpComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFrmCmpStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFrmCmp tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFrmCmpIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.10
This variable represents the index for the lpIlsFwdrLtFrmCmp tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFrmCmpTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFrmCmpTopEntry

lpIlsFwdrLtFrmCmpTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.2.10.1
An entry in the lpIlsFwdrLtFrmCmpTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFrmCmpTopEntry  

lpIlsFwdrLtFrmCmpTData 1.3.6.1.4.1.562.2.4.1.12.21.2.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFrmCpy 1.3.6.1.4.1.562.2.4.1.12.21.2.3
OBJECT IDENTIFIER    

lpIlsFwdrLtFrmCpyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1
This entry controls the addition and deletion of lpIlsFwdrLtFrmCpy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFrmCpyRowStatusEntry

lpIlsFwdrLtFrmCpyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1
A single entry in the table represents a single lpIlsFwdrLtFrmCpy component.
OBJECT-TYPE    
  LpIlsFwdrLtFrmCpyRowStatusEntry  

lpIlsFwdrLtFrmCpyRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFrmCpy components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFrmCpyComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFrmCpyStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFrmCpy tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFrmCpyIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.10
This variable represents the index for the lpIlsFwdrLtFrmCpy tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFrmCpyTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFrmCpyTopEntry

lpIlsFwdrLtFrmCpyTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.3.10.1
An entry in the lpIlsFwdrLtFrmCpyTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFrmCpyTopEntry  

lpIlsFwdrLtFrmCpyTData 1.3.6.1.4.1.562.2.4.1.12.21.2.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtPrtCfg 1.3.6.1.4.1.562.2.4.1.12.21.2.4
OBJECT IDENTIFIER    

lpIlsFwdrLtPrtCfgRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1
This entry controls the addition and deletion of lpIlsFwdrLtPrtCfg components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtPrtCfgRowStatusEntry

lpIlsFwdrLtPrtCfgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1
A single entry in the table represents a single lpIlsFwdrLtPrtCfg component.
OBJECT-TYPE    
  LpIlsFwdrLtPrtCfgRowStatusEntry  

lpIlsFwdrLtPrtCfgRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtPrtCfg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtPrtCfgComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtPrtCfgStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtPrtCfg tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtPrtCfgIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.10
This variable represents the index for the lpIlsFwdrLtPrtCfg tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtPrtCfgTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtPrtCfgTopEntry

lpIlsFwdrLtPrtCfgTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.4.10.1
An entry in the lpIlsFwdrLtPrtCfgTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtPrtCfgTopEntry  

lpIlsFwdrLtPrtCfgTData 1.3.6.1.4.1.562.2.4.1.12.21.2.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFb 1.3.6.1.4.1.562.2.4.1.12.21.2.5
OBJECT IDENTIFIER    

lpIlsFwdrLtFbRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1
This entry controls the addition and deletion of lpIlsFwdrLtFb components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbRowStatusEntry

lpIlsFwdrLtFbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1
A single entry in the table represents a single lpIlsFwdrLtFb component.
OBJECT-TYPE    
  LpIlsFwdrLtFbRowStatusEntry  

lpIlsFwdrLtFbRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFb tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.10
This variable represents the index for the lpIlsFwdrLtFb tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbTxInfo 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2
OBJECT IDENTIFIER    

lpIlsFwdrLtFbTxInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1
This entry controls the addition and deletion of lpIlsFwdrLtFbTxInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbTxInfoRowStatusEntry

lpIlsFwdrLtFbTxInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1
A single entry in the table represents a single lpIlsFwdrLtFbTxInfo component.
OBJECT-TYPE    
  LpIlsFwdrLtFbTxInfoRowStatusEntry  

lpIlsFwdrLtFbTxInfoRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbTxInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbTxInfoComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbTxInfoStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbTxInfo tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbTxInfoIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.10
This variable represents the index for the lpIlsFwdrLtFbTxInfo tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbTxInfoTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbTxInfoTopEntry

lpIlsFwdrLtFbTxInfoTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.10.1
An entry in the lpIlsFwdrLtFbTxInfoTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbTxInfoTopEntry  

lpIlsFwdrLtFbTxInfoTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbFddiMac 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3
OBJECT IDENTIFIER    

lpIlsFwdrLtFbFddiMacRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1
This entry controls the addition and deletion of lpIlsFwdrLtFbFddiMac components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbFddiMacRowStatusEntry

lpIlsFwdrLtFbFddiMacRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1
A single entry in the table represents a single lpIlsFwdrLtFbFddiMac component.
OBJECT-TYPE    
  LpIlsFwdrLtFbFddiMacRowStatusEntry  

lpIlsFwdrLtFbFddiMacRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbFddiMac components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbFddiMacComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbFddiMacStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbFddiMac tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbFddiMacIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.10
This variable represents the index for the lpIlsFwdrLtFbFddiMac tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbFddiMacTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbFddiMacTopEntry

lpIlsFwdrLtFbFddiMacTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.10.1
An entry in the lpIlsFwdrLtFbFddiMacTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbFddiMacTopEntry  

lpIlsFwdrLtFbFddiMacTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbMacEnet 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4
OBJECT IDENTIFIER    

lpIlsFwdrLtFbMacEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1
This entry controls the addition and deletion of lpIlsFwdrLtFbMacEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbMacEnetRowStatusEntry

lpIlsFwdrLtFbMacEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1
A single entry in the table represents a single lpIlsFwdrLtFbMacEnet component.
OBJECT-TYPE    
  LpIlsFwdrLtFbMacEnetRowStatusEntry  

lpIlsFwdrLtFbMacEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbMacEnet components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbMacEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbMacEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbMacEnet tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbMacEnetIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.10
This variable represents the index for the lpIlsFwdrLtFbMacEnet tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbMacEnetTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbMacEnetTopEntry

lpIlsFwdrLtFbMacEnetTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.10.1
An entry in the lpIlsFwdrLtFbMacEnetTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbMacEnetTopEntry  

lpIlsFwdrLtFbMacEnetTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbMacTr 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5
OBJECT IDENTIFIER    

lpIlsFwdrLtFbMacTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1
This entry controls the addition and deletion of lpIlsFwdrLtFbMacTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbMacTrRowStatusEntry

lpIlsFwdrLtFbMacTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1
A single entry in the table represents a single lpIlsFwdrLtFbMacTr component.
OBJECT-TYPE    
  LpIlsFwdrLtFbMacTrRowStatusEntry  

lpIlsFwdrLtFbMacTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbMacTr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbMacTrComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbMacTrStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbMacTr tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbMacTrIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.10
This variable represents the index for the lpIlsFwdrLtFbMacTr tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbMacTrTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbMacTrTopEntry

lpIlsFwdrLtFbMacTrTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.10.1
An entry in the lpIlsFwdrLtFbMacTrTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbMacTrTopEntry  

lpIlsFwdrLtFbMacTrTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6
OBJECT IDENTIFIER    

lpIlsFwdrLtFbDataRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1
This entry controls the addition and deletion of lpIlsFwdrLtFbData components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbDataRowStatusEntry

lpIlsFwdrLtFbDataRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1
A single entry in the table represents a single lpIlsFwdrLtFbData component.
OBJECT-TYPE    
  LpIlsFwdrLtFbDataRowStatusEntry  

lpIlsFwdrLtFbDataRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbData components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbDataComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbDataStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbData tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbDataIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.10
This variable represents the index for the lpIlsFwdrLtFbData tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbDataTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbDataTopEntry

lpIlsFwdrLtFbDataTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.10.1
An entry in the lpIlsFwdrLtFbDataTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbDataTopEntry  

lpIlsFwdrLtFbDataTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbIpH 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7
OBJECT IDENTIFIER    

lpIlsFwdrLtFbIpHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1
This entry controls the addition and deletion of lpIlsFwdrLtFbIpH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbIpHRowStatusEntry

lpIlsFwdrLtFbIpHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1
A single entry in the table represents a single lpIlsFwdrLtFbIpH component.
OBJECT-TYPE    
  LpIlsFwdrLtFbIpHRowStatusEntry  

lpIlsFwdrLtFbIpHRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbIpH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbIpHComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbIpHStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbIpH tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbIpHIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.10
This variable represents the index for the lpIlsFwdrLtFbIpH tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbIpHTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbIpHTopEntry

lpIlsFwdrLtFbIpHTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10.1
An entry in the lpIlsFwdrLtFbIpHTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbIpHTopEntry  

lpIlsFwdrLtFbIpHTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbLlch 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8
OBJECT IDENTIFIER    

lpIlsFwdrLtFbLlchRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1
This entry controls the addition and deletion of lpIlsFwdrLtFbLlch components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbLlchRowStatusEntry

lpIlsFwdrLtFbLlchRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1
A single entry in the table represents a single lpIlsFwdrLtFbLlch component.
OBJECT-TYPE    
  LpIlsFwdrLtFbLlchRowStatusEntry  

lpIlsFwdrLtFbLlchRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbLlch components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbLlchComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbLlchStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbLlch tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbLlchIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.10
This variable represents the index for the lpIlsFwdrLtFbLlch tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbLlchTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbLlchTopEntry

lpIlsFwdrLtFbLlchTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.10.1
An entry in the lpIlsFwdrLtFbLlchTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbLlchTopEntry  

lpIlsFwdrLtFbLlchTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbAppleH 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9
OBJECT IDENTIFIER    

lpIlsFwdrLtFbAppleHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1
This entry controls the addition and deletion of lpIlsFwdrLtFbAppleH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbAppleHRowStatusEntry

lpIlsFwdrLtFbAppleHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1
A single entry in the table represents a single lpIlsFwdrLtFbAppleH component.
OBJECT-TYPE    
  LpIlsFwdrLtFbAppleHRowStatusEntry  

lpIlsFwdrLtFbAppleHRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbAppleH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbAppleHComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbAppleHStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbAppleH tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbAppleHIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.10
This variable represents the index for the lpIlsFwdrLtFbAppleH tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbAppleHTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbAppleHTopEntry

lpIlsFwdrLtFbAppleHTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.10.1
An entry in the lpIlsFwdrLtFbAppleHTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbAppleHTopEntry  

lpIlsFwdrLtFbAppleHTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbIpxH 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10
OBJECT IDENTIFIER    

lpIlsFwdrLtFbIpxHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1
This entry controls the addition and deletion of lpIlsFwdrLtFbIpxH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbIpxHRowStatusEntry

lpIlsFwdrLtFbIpxHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1
A single entry in the table represents a single lpIlsFwdrLtFbIpxH component.
OBJECT-TYPE    
  LpIlsFwdrLtFbIpxHRowStatusEntry  

lpIlsFwdrLtFbIpxHRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtFbIpxH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtFbIpxHComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtFbIpxHStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtFbIpxH tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtFbIpxHIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.10
This variable represents the index for the lpIlsFwdrLtFbIpxH tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtFbIpxHTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbIpxHTopEntry

lpIlsFwdrLtFbIpxHTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.10.1
An entry in the lpIlsFwdrLtFbIpxHTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbIpxHTopEntry  

lpIlsFwdrLtFbIpxHTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtFbTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.5.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtFbTopEntry

lpIlsFwdrLtFbTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.5.20.1
An entry in the lpIlsFwdrLtFbTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtFbTopEntry  

lpIlsFwdrLtFbTData 1.3.6.1.4.1.562.2.4.1.12.21.2.5.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtCntl 1.3.6.1.4.1.562.2.4.1.12.21.2.6
OBJECT IDENTIFIER    

lpIlsFwdrLtCntlRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1
This entry controls the addition and deletion of lpIlsFwdrLtCntl components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtCntlRowStatusEntry

lpIlsFwdrLtCntlRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1
A single entry in the table represents a single lpIlsFwdrLtCntl component.
OBJECT-TYPE    
  LpIlsFwdrLtCntlRowStatusEntry  

lpIlsFwdrLtCntlRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrLtCntl components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrLtCntlComponentName 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrLtCntlStorageType 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.4
This variable represents the storage type value for the lpIlsFwdrLtCntl tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrLtCntlIndex 1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.10
This variable represents the index for the lpIlsFwdrLtCntl tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrLtCntlTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtCntlTopEntry

lpIlsFwdrLtCntlTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.6.10.1
An entry in the lpIlsFwdrLtCntlTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtCntlTopEntry  

lpIlsFwdrLtCntlTData 1.3.6.1.4.1.562.2.4.1.12.21.2.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrLtTopTable 1.3.6.1.4.1.562.2.4.1.12.21.2.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLtTopEntry

lpIlsFwdrLtTopEntry 1.3.6.1.4.1.562.2.4.1.12.21.2.20.1
An entry in the lpIlsFwdrLtTopTable.
OBJECT-TYPE    
  LpIlsFwdrLtTopEntry  

lpIlsFwdrLtTData 1.3.6.1.4.1.562.2.4.1.12.21.2.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpIlsFwdrTest 1.3.6.1.4.1.562.2.4.1.12.21.5
OBJECT IDENTIFIER    

lpIlsFwdrTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.5.1
This entry controls the addition and deletion of lpIlsFwdrTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrTestRowStatusEntry

lpIlsFwdrTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.5.1.1
A single entry in the table represents a single lpIlsFwdrTest component.
OBJECT-TYPE    
  LpIlsFwdrTestRowStatusEntry  

lpIlsFwdrTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.1
This variable is used as the basis for SNMP naming of lpIlsFwdrTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpIlsFwdrTestComponentName 1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpIlsFwdrTestStorageType 1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.4
This variable represents the storage type value for the lpIlsFwdrTest tables.
OBJECT-TYPE    
  StorageType  

lpIlsFwdrTestIndex 1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.10
This variable represents the index for the lpIlsFwdrTest tables.
OBJECT-TYPE    
  NonReplicated  

lpIlsFwdrTestPTOTable 1.3.6.1.4.1.562.2.4.1.12.21.5.10
This group contains the operational data for the LanPortTest component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrTestPTOEntry

lpIlsFwdrTestPTOEntry 1.3.6.1.4.1.562.2.4.1.12.21.5.10.1
An entry in the lpIlsFwdrTestPTOTable.
OBJECT-TYPE    
  LpIlsFwdrTestPTOEntry  

lpIlsFwdrTestType 1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.1
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors.
OBJECT-TYPE    
  INTEGER onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268)  

lpIlsFwdrTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.2
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpIlsFwdrTestDuration 1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.3
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpIlsFwdrTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.21.5.11
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrTestResultsEntry

lpIlsFwdrTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1
An entry in the lpIlsFwdrTestResultsTable.
OBJECT-TYPE    
  LpIlsFwdrTestResultsEntry  

lpIlsFwdrTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.4
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpIlsFwdrTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.5
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpIlsFwdrTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.6
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4)  

lpIlsFwdrTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.7
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.8
This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.10
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.11
This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.21.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrIfEntryEntry

lpIlsFwdrIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.21.11.1
An entry in the lpIlsFwdrIfEntryTable.
OBJECT-TYPE    
  LpIlsFwdrIfEntryEntry  

lpIlsFwdrIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.21.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpIlsFwdrIfIndex 1.3.6.1.4.1.562.2.4.1.12.21.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpIlsFwdrStateTable 1.3.6.1.4.1.562.2.4.1.12.21.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrStateEntry

lpIlsFwdrStateEntry 1.3.6.1.4.1.562.2.4.1.12.21.12.1
An entry in the lpIlsFwdrStateTable.
OBJECT-TYPE    
  LpIlsFwdrStateEntry  

lpIlsFwdrAdminState 1.3.6.1.4.1.562.2.4.1.12.21.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpIlsFwdrOperationalState 1.3.6.1.4.1.562.2.4.1.12.21.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpIlsFwdrUsageState 1.3.6.1.4.1.562.2.4.1.12.21.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpIlsFwdrOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.21.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrOperStatusEntry

lpIlsFwdrOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.21.13.1
An entry in the lpIlsFwdrOperStatusTable.
OBJECT-TYPE    
  LpIlsFwdrOperStatusEntry  

lpIlsFwdrSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.21.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpIlsFwdrStatsTable 1.3.6.1.4.1.562.2.4.1.12.21.14
This group contains the operational frame statistics related attributes of the IlsForwarder component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrStatsEntry

lpIlsFwdrStatsEntry 1.3.6.1.4.1.562.2.4.1.12.21.14.1
An entry in the lpIlsFwdrStatsTable.
OBJECT-TYPE    
  LpIlsFwdrStatsEntry  

lpIlsFwdrFramesReceived 1.3.6.1.4.1.562.2.4.1.12.21.14.1.1
This attribute counts the total number of frames that have been received by this card. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrProcessedCount 1.3.6.1.4.1.562.2.4.1.12.21.14.1.2
This attribute counts the number of frames successfully processed by this card. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrErrorCount 1.3.6.1.4.1.562.2.4.1.12.21.14.1.3
This attribute counts the number of internal errors detected in transferring frames from an ATM card to this card. A continuous increment of this count indicates that the hardware may probably be defective. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrFramesDiscarded 1.3.6.1.4.1.562.2.4.1.12.21.14.1.4
This attribute counts the number of frames which are discarded due to local buffer congestion. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpIlsFwdrLinkToTrafficSourceTable 1.3.6.1.4.1.562.2.4.1.12.21.312
This attribute contains a list of components that are using this IlsForwarder.
OBJECT-TYPE    
  SEQUENCE OF  
    LpIlsFwdrLinkToTrafficSourceEntry

lpIlsFwdrLinkToTrafficSourceEntry 1.3.6.1.4.1.562.2.4.1.12.21.312.1
An entry in the lpIlsFwdrLinkToTrafficSourceTable.
OBJECT-TYPE    
  LpIlsFwdrLinkToTrafficSourceEntry  

lpIlsFwdrLinkToTrafficSourceValue 1.3.6.1.4.1.562.2.4.1.12.21.312.1.1
This variable represents both the value and the index for the lpIlsFwdrLinkToTrafficSourceTable.
OBJECT-TYPE    
  Link  

lpEth100 1.3.6.1.4.1.562.2.4.1.12.25
OBJECT IDENTIFIER    

lpEth100RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.1
This entry controls the addition and deletion of lpEth100 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100RowStatusEntry

lpEth100RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.1.1
A single entry in the table represents a single lpEth100 component.
OBJECT-TYPE    
  LpEth100RowStatusEntry  

lpEth100RowStatus 1.3.6.1.4.1.562.2.4.1.12.25.1.1.1
This variable is used as the basis for SNMP naming of lpEth100 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100ComponentName 1.3.6.1.4.1.562.2.4.1.12.25.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100StorageType 1.3.6.1.4.1.562.2.4.1.12.25.1.1.4
This variable represents the storage type value for the lpEth100 tables.
OBJECT-TYPE    
  StorageType  

lpEth100Index 1.3.6.1.4.1.562.2.4.1.12.25.1.1.10
This variable represents the index for the lpEth100 tables.
OBJECT-TYPE    
  Integer32 0..1  

lpEth100Lt 1.3.6.1.4.1.562.2.4.1.12.25.2
OBJECT IDENTIFIER    

lpEth100LtRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.1
This entry controls the addition and deletion of lpEth100Lt components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtRowStatusEntry

lpEth100LtRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.1.1
A single entry in the table represents a single lpEth100Lt component.
OBJECT-TYPE    
  LpEth100LtRowStatusEntry  

lpEth100LtRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.1
This variable is used as the basis for SNMP naming of lpEth100Lt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.4
This variable represents the storage type value for the lpEth100Lt tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.10
This variable represents the index for the lpEth100Lt tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFrmCmp 1.3.6.1.4.1.562.2.4.1.12.25.2.2
OBJECT IDENTIFIER    

lpEth100LtFrmCmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1
This entry controls the addition and deletion of lpEth100LtFrmCmp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFrmCmpRowStatusEntry

lpEth100LtFrmCmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1
A single entry in the table represents a single lpEth100LtFrmCmp component.
OBJECT-TYPE    
  LpEth100LtFrmCmpRowStatusEntry  

lpEth100LtFrmCmpRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFrmCmp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFrmCmpComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFrmCmpStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.4
This variable represents the storage type value for the lpEth100LtFrmCmp tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFrmCmpIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.10
This variable represents the index for the lpEth100LtFrmCmp tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFrmCmpTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFrmCmpTopEntry

lpEth100LtFrmCmpTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.2.10.1
An entry in the lpEth100LtFrmCmpTopTable.
OBJECT-TYPE    
  LpEth100LtFrmCmpTopEntry  

lpEth100LtFrmCmpTData 1.3.6.1.4.1.562.2.4.1.12.25.2.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFrmCpy 1.3.6.1.4.1.562.2.4.1.12.25.2.3
OBJECT IDENTIFIER    

lpEth100LtFrmCpyRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1
This entry controls the addition and deletion of lpEth100LtFrmCpy components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFrmCpyRowStatusEntry

lpEth100LtFrmCpyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1
A single entry in the table represents a single lpEth100LtFrmCpy component.
OBJECT-TYPE    
  LpEth100LtFrmCpyRowStatusEntry  

lpEth100LtFrmCpyRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFrmCpy components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFrmCpyComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFrmCpyStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.4
This variable represents the storage type value for the lpEth100LtFrmCpy tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFrmCpyIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.10
This variable represents the index for the lpEth100LtFrmCpy tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFrmCpyTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFrmCpyTopEntry

lpEth100LtFrmCpyTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.3.10.1
An entry in the lpEth100LtFrmCpyTopTable.
OBJECT-TYPE    
  LpEth100LtFrmCpyTopEntry  

lpEth100LtFrmCpyTData 1.3.6.1.4.1.562.2.4.1.12.25.2.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtPrtCfg 1.3.6.1.4.1.562.2.4.1.12.25.2.4
OBJECT IDENTIFIER    

lpEth100LtPrtCfgRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1
This entry controls the addition and deletion of lpEth100LtPrtCfg components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtPrtCfgRowStatusEntry

lpEth100LtPrtCfgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1
A single entry in the table represents a single lpEth100LtPrtCfg component.
OBJECT-TYPE    
  LpEth100LtPrtCfgRowStatusEntry  

lpEth100LtPrtCfgRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtPrtCfg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtPrtCfgComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtPrtCfgStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.4
This variable represents the storage type value for the lpEth100LtPrtCfg tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtPrtCfgIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.10
This variable represents the index for the lpEth100LtPrtCfg tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtPrtCfgTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtPrtCfgTopEntry

lpEth100LtPrtCfgTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.4.10.1
An entry in the lpEth100LtPrtCfgTopTable.
OBJECT-TYPE    
  LpEth100LtPrtCfgTopEntry  

lpEth100LtPrtCfgTData 1.3.6.1.4.1.562.2.4.1.12.25.2.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFb 1.3.6.1.4.1.562.2.4.1.12.25.2.5
OBJECT IDENTIFIER    

lpEth100LtFbRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1
This entry controls the addition and deletion of lpEth100LtFb components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbRowStatusEntry

lpEth100LtFbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1
A single entry in the table represents a single lpEth100LtFb component.
OBJECT-TYPE    
  LpEth100LtFbRowStatusEntry  

lpEth100LtFbRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.4
This variable represents the storage type value for the lpEth100LtFb tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.10
This variable represents the index for the lpEth100LtFb tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbTxInfo 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2
OBJECT IDENTIFIER    

lpEth100LtFbTxInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1
This entry controls the addition and deletion of lpEth100LtFbTxInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbTxInfoRowStatusEntry

lpEth100LtFbTxInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1
A single entry in the table represents a single lpEth100LtFbTxInfo component.
OBJECT-TYPE    
  LpEth100LtFbTxInfoRowStatusEntry  

lpEth100LtFbTxInfoRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbTxInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbTxInfoComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbTxInfoStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.4
This variable represents the storage type value for the lpEth100LtFbTxInfo tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbTxInfoIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.10
This variable represents the index for the lpEth100LtFbTxInfo tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbTxInfoTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbTxInfoTopEntry

lpEth100LtFbTxInfoTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.10.1
An entry in the lpEth100LtFbTxInfoTopTable.
OBJECT-TYPE    
  LpEth100LtFbTxInfoTopEntry  

lpEth100LtFbTxInfoTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbFddiMac 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3
OBJECT IDENTIFIER    

lpEth100LtFbFddiMacRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1
This entry controls the addition and deletion of lpEth100LtFbFddiMac components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbFddiMacRowStatusEntry

lpEth100LtFbFddiMacRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1
A single entry in the table represents a single lpEth100LtFbFddiMac component.
OBJECT-TYPE    
  LpEth100LtFbFddiMacRowStatusEntry  

lpEth100LtFbFddiMacRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbFddiMac components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbFddiMacComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbFddiMacStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.4
This variable represents the storage type value for the lpEth100LtFbFddiMac tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbFddiMacIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.10
This variable represents the index for the lpEth100LtFbFddiMac tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbFddiMacTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbFddiMacTopEntry

lpEth100LtFbFddiMacTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.10.1
An entry in the lpEth100LtFbFddiMacTopTable.
OBJECT-TYPE    
  LpEth100LtFbFddiMacTopEntry  

lpEth100LtFbFddiMacTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbMacEnet 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4
OBJECT IDENTIFIER    

lpEth100LtFbMacEnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1
This entry controls the addition and deletion of lpEth100LtFbMacEnet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbMacEnetRowStatusEntry

lpEth100LtFbMacEnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1
A single entry in the table represents a single lpEth100LtFbMacEnet component.
OBJECT-TYPE    
  LpEth100LtFbMacEnetRowStatusEntry  

lpEth100LtFbMacEnetRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbMacEnet components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbMacEnetComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbMacEnetStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.4
This variable represents the storage type value for the lpEth100LtFbMacEnet tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbMacEnetIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.10
This variable represents the index for the lpEth100LtFbMacEnet tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbMacEnetTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbMacEnetTopEntry

lpEth100LtFbMacEnetTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.10.1
An entry in the lpEth100LtFbMacEnetTopTable.
OBJECT-TYPE    
  LpEth100LtFbMacEnetTopEntry  

lpEth100LtFbMacEnetTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbMacTr 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5
OBJECT IDENTIFIER    

lpEth100LtFbMacTrRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1
This entry controls the addition and deletion of lpEth100LtFbMacTr components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbMacTrRowStatusEntry

lpEth100LtFbMacTrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1
A single entry in the table represents a single lpEth100LtFbMacTr component.
OBJECT-TYPE    
  LpEth100LtFbMacTrRowStatusEntry  

lpEth100LtFbMacTrRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbMacTr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbMacTrComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbMacTrStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.4
This variable represents the storage type value for the lpEth100LtFbMacTr tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbMacTrIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.10
This variable represents the index for the lpEth100LtFbMacTr tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbMacTrTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbMacTrTopEntry

lpEth100LtFbMacTrTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.10.1
An entry in the lpEth100LtFbMacTrTopTable.
OBJECT-TYPE    
  LpEth100LtFbMacTrTopEntry  

lpEth100LtFbMacTrTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6
OBJECT IDENTIFIER    

lpEth100LtFbDataRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1
This entry controls the addition and deletion of lpEth100LtFbData components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbDataRowStatusEntry

lpEth100LtFbDataRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1
A single entry in the table represents a single lpEth100LtFbData component.
OBJECT-TYPE    
  LpEth100LtFbDataRowStatusEntry  

lpEth100LtFbDataRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbData components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbDataComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbDataStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.4
This variable represents the storage type value for the lpEth100LtFbData tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbDataIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.10
This variable represents the index for the lpEth100LtFbData tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbDataTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbDataTopEntry

lpEth100LtFbDataTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10.1
An entry in the lpEth100LtFbDataTopTable.
OBJECT-TYPE    
  LpEth100LtFbDataTopEntry  

lpEth100LtFbDataTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbIpH 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7
OBJECT IDENTIFIER    

lpEth100LtFbIpHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1
This entry controls the addition and deletion of lpEth100LtFbIpH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbIpHRowStatusEntry

lpEth100LtFbIpHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1
A single entry in the table represents a single lpEth100LtFbIpH component.
OBJECT-TYPE    
  LpEth100LtFbIpHRowStatusEntry  

lpEth100LtFbIpHRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbIpH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbIpHComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbIpHStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.4
This variable represents the storage type value for the lpEth100LtFbIpH tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbIpHIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.10
This variable represents the index for the lpEth100LtFbIpH tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbIpHTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbIpHTopEntry

lpEth100LtFbIpHTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10.1
An entry in the lpEth100LtFbIpHTopTable.
OBJECT-TYPE    
  LpEth100LtFbIpHTopEntry  

lpEth100LtFbIpHTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbLlch 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8
OBJECT IDENTIFIER    

lpEth100LtFbLlchRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1
This entry controls the addition and deletion of lpEth100LtFbLlch components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbLlchRowStatusEntry

lpEth100LtFbLlchRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1
A single entry in the table represents a single lpEth100LtFbLlch component.
OBJECT-TYPE    
  LpEth100LtFbLlchRowStatusEntry  

lpEth100LtFbLlchRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbLlch components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbLlchComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbLlchStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.4
This variable represents the storage type value for the lpEth100LtFbLlch tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbLlchIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.10
This variable represents the index for the lpEth100LtFbLlch tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbLlchTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbLlchTopEntry

lpEth100LtFbLlchTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10.1
An entry in the lpEth100LtFbLlchTopTable.
OBJECT-TYPE    
  LpEth100LtFbLlchTopEntry  

lpEth100LtFbLlchTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbAppleH 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9
OBJECT IDENTIFIER    

lpEth100LtFbAppleHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1
This entry controls the addition and deletion of lpEth100LtFbAppleH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbAppleHRowStatusEntry

lpEth100LtFbAppleHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1
A single entry in the table represents a single lpEth100LtFbAppleH component.
OBJECT-TYPE    
  LpEth100LtFbAppleHRowStatusEntry  

lpEth100LtFbAppleHRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbAppleH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbAppleHComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbAppleHStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.4
This variable represents the storage type value for the lpEth100LtFbAppleH tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbAppleHIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.10
This variable represents the index for the lpEth100LtFbAppleH tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbAppleHTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbAppleHTopEntry

lpEth100LtFbAppleHTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.10.1
An entry in the lpEth100LtFbAppleHTopTable.
OBJECT-TYPE    
  LpEth100LtFbAppleHTopEntry  

lpEth100LtFbAppleHTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbIpxH 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10
OBJECT IDENTIFIER    

lpEth100LtFbIpxHRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1
This entry controls the addition and deletion of lpEth100LtFbIpxH components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbIpxHRowStatusEntry

lpEth100LtFbIpxHRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1
A single entry in the table represents a single lpEth100LtFbIpxH component.
OBJECT-TYPE    
  LpEth100LtFbIpxHRowStatusEntry  

lpEth100LtFbIpxHRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtFbIpxH components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtFbIpxHComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtFbIpxHStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.4
This variable represents the storage type value for the lpEth100LtFbIpxH tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtFbIpxHIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.10
This variable represents the index for the lpEth100LtFbIpxH tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtFbIpxHTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbIpxHTopEntry

lpEth100LtFbIpxHTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10.1
An entry in the lpEth100LtFbIpxHTopTable.
OBJECT-TYPE    
  LpEth100LtFbIpxHTopEntry  

lpEth100LtFbIpxHTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtFbTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.5.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtFbTopEntry

lpEth100LtFbTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.5.20.1
An entry in the lpEth100LtFbTopTable.
OBJECT-TYPE    
  LpEth100LtFbTopEntry  

lpEth100LtFbTData 1.3.6.1.4.1.562.2.4.1.12.25.2.5.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtCntl 1.3.6.1.4.1.562.2.4.1.12.25.2.6
OBJECT IDENTIFIER    

lpEth100LtCntlRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1
This entry controls the addition and deletion of lpEth100LtCntl components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtCntlRowStatusEntry

lpEth100LtCntlRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1
A single entry in the table represents a single lpEth100LtCntl component.
OBJECT-TYPE    
  LpEth100LtCntlRowStatusEntry  

lpEth100LtCntlRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.1
This variable is used as the basis for SNMP naming of lpEth100LtCntl components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100LtCntlComponentName 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100LtCntlStorageType 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.4
This variable represents the storage type value for the lpEth100LtCntl tables.
OBJECT-TYPE    
  StorageType  

lpEth100LtCntlIndex 1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.10
This variable represents the index for the lpEth100LtCntl tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100LtCntlTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.6.10
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtCntlTopEntry

lpEth100LtCntlTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.6.10.1
An entry in the lpEth100LtCntlTopTable.
OBJECT-TYPE    
  LpEth100LtCntlTopEntry  

lpEth100LtCntlTData 1.3.6.1.4.1.562.2.4.1.12.25.2.6.10.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100LtTopTable 1.3.6.1.4.1.562.2.4.1.12.25.2.20
This group contains the operational data for the LanTest component and its subcomponents.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100LtTopEntry

lpEth100LtTopEntry 1.3.6.1.4.1.562.2.4.1.12.25.2.20.1
An entry in the lpEth100LtTopTable.
OBJECT-TYPE    
  LpEth100LtTopEntry  

lpEth100LtTData 1.3.6.1.4.1.562.2.4.1.12.25.2.20.1.1
This attribute is used to display and set attributes.
OBJECT-TYPE    
  AsciiString SIZE(0..255)  

lpEth100Test 1.3.6.1.4.1.562.2.4.1.12.25.3
OBJECT IDENTIFIER    

lpEth100TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.3.1
This entry controls the addition and deletion of lpEth100Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100TestRowStatusEntry

lpEth100TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.3.1.1
A single entry in the table represents a single lpEth100Test component.
OBJECT-TYPE    
  LpEth100TestRowStatusEntry  

lpEth100TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.1
This variable is used as the basis for SNMP naming of lpEth100Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEth100TestComponentName 1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEth100TestStorageType 1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.4
This variable represents the storage type value for the lpEth100Test tables.
OBJECT-TYPE    
  StorageType  

lpEth100TestIndex 1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.10
This variable represents the index for the lpEth100Test tables.
OBJECT-TYPE    
  NonReplicated  

lpEth100TestPTOTable 1.3.6.1.4.1.562.2.4.1.12.25.3.10
This group contains the operational data for the LanPortTest component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100TestPTOEntry

lpEth100TestPTOEntry 1.3.6.1.4.1.562.2.4.1.12.25.3.10.1
An entry in the lpEth100TestPTOTable.
OBJECT-TYPE    
  LpEth100TestPTOEntry  

lpEth100TestType 1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.1
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors.
OBJECT-TYPE    
  INTEGER onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268)  

lpEth100TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.2
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpEth100TestDuration 1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.3
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpEth100TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.25.3.11
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100TestResultsEntry

lpEth100TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1
An entry in the lpEth100TestResultsTable.
OBJECT-TYPE    
  LpEth100TestResultsEntry  

lpEth100TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.4
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpEth100TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.5
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpEth100TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.6
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4)  

lpEth100TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.7
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEth100TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.8
This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEth100TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEth100TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.10
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEth100TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.11
This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpEth100CidDataTable 1.3.6.1.4.1.562.2.4.1.12.25.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100CidDataEntry

lpEth100CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.25.10.1
An entry in the lpEth100CidDataTable.
OBJECT-TYPE    
  LpEth100CidDataEntry  

lpEth100CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.25.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpEth100IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.25.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100IfEntryEntry

lpEth100IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.25.11.1
An entry in the lpEth100IfEntryTable.
OBJECT-TYPE    
  LpEth100IfEntryEntry  

lpEth100IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.25.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpEth100IfIndex 1.3.6.1.4.1.562.2.4.1.12.25.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpEth100ProvTable 1.3.6.1.4.1.562.2.4.1.12.25.12
This group contains the provisionable attributes of the Eth100BaseT component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100ProvEntry

lpEth100ProvEntry 1.3.6.1.4.1.562.2.4.1.12.25.12.1
An entry in the lpEth100ProvTable.
OBJECT-TYPE    
  LpEth100ProvEntry  

lpEth100DuplexMode 1.3.6.1.4.1.562.2.4.1.12.25.12.1.1
This attribute specifies the duplex mode of the port. This attribute is ignored if auto negotiation is successful.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

lpEth100LineSpeed 1.3.6.1.4.1.562.2.4.1.12.25.12.1.2
This attribute sets the operating speed for the Ethernet 100BaseT port. This attribute is ignored if auto negotiation is successful.
OBJECT-TYPE    
  Unsigned32 10 | 100  

lpEth100AutoNegotiation 1.3.6.1.4.1.562.2.4.1.12.25.12.1.3
This attribute is used to select whether or not the port does auto negotiation. The provisionable values of duplexMode and lineSpeed are ignored if auto negotiation is successful. Refer to the operational attribute autoNegStatus for auto negotiation results.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lpEth100ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.25.12.1.4
This attribute contains the component name of a Framer which is associated with the Eth100BaseT component. This defines which Lan Application will be using this Eth100BaseT interface.
OBJECT-TYPE    
  Link  

lpEth100AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.25.13
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100AdminInfoEntry

lpEth100AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.25.13.1
An entry in the lpEth100AdminInfoTable.
OBJECT-TYPE    
  LpEth100AdminInfoEntry  

lpEth100Vendor 1.3.6.1.4.1.562.2.4.1.12.25.13.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpEth100CommentText 1.3.6.1.4.1.562.2.4.1.12.25.13.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpEth100StateTable 1.3.6.1.4.1.562.2.4.1.12.25.15
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100StateEntry

lpEth100StateEntry 1.3.6.1.4.1.562.2.4.1.12.25.15.1
An entry in the lpEth100StateTable.
OBJECT-TYPE    
  LpEth100StateEntry  

lpEth100AdminState 1.3.6.1.4.1.562.2.4.1.12.25.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpEth100OperationalState 1.3.6.1.4.1.562.2.4.1.12.25.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpEth100UsageState 1.3.6.1.4.1.562.2.4.1.12.25.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpEth100OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.25.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100OperStatusEntry

lpEth100OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.25.16.1
An entry in the lpEth100OperStatusTable.
OBJECT-TYPE    
  LpEth100OperStatusEntry  

lpEth100SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.25.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpEth100OperTable 1.3.6.1.4.1.562.2.4.1.12.25.17
This group contains the Port operational attributes of the Eth100BaseT component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100OperEntry

lpEth100OperEntry 1.3.6.1.4.1.562.2.4.1.12.25.17.1
An entry in the lpEth100OperTable.
OBJECT-TYPE    
  LpEth100OperEntry  

lpEth100MacAddress 1.3.6.1.4.1.562.2.4.1.12.25.17.1.1
This attribute indicates the medium access controller (MAC) address. The MAC address is displayed in canonical format.
OBJECT-TYPE    
  MacAddress SIZE(6)  

lpEth100AutoNegStatus 1.3.6.1.4.1.562.2.4.1.12.25.17.1.4
This attribute displays the status of the auto negotiation at the Phy level.
OBJECT-TYPE    
  INTEGER succeeded(1), failed(2), disabled(3)  

lpEth100ActualLineSpeed 1.3.6.1.4.1.562.2.4.1.12.25.17.1.5
This attribute indicates the line speed of the Eth100BaseT port.
OBJECT-TYPE    
  Unsigned32 10 | 100  

lpEth100ActualDuplexMode 1.3.6.1.4.1.562.2.4.1.12.25.17.1.6
This attribute indicates whether the hardware is in half duplex or full duplex mode.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

lpEth100Eth100StatsTable 1.3.6.1.4.1.562.2.4.1.12.25.18
This group contains the statistical attributes for the Eth100BaseT component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100Eth100StatsEntry

lpEth100Eth100StatsEntry 1.3.6.1.4.1.562.2.4.1.12.25.18.1
An entry in the lpEth100Eth100StatsTable.
OBJECT-TYPE    
  LpEth100Eth100StatsEntry  

lpEth100FramesTransmittedOk 1.3.6.1.4.1.562.2.4.1.12.25.18.1.1
This attribute counts the number of frames which were transmitted without errors. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100FramesReceivedOk 1.3.6.1.4.1.562.2.4.1.12.25.18.1.2
This attribute counts the number of frames which were received without errors. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100OctetsTransmittedOk 1.3.6.1.4.1.562.2.4.1.12.25.18.1.3
This attribute counts the number of octets which were transmitted without errors. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100OctetsReceivedOk 1.3.6.1.4.1.562.2.4.1.12.25.18.1.4
This attribute counts the number of octets which were received without errors. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100UndersizeFrames 1.3.6.1.4.1.562.2.4.1.12.25.18.1.5
This attribute counts the number of frames that were received but were less than the minimum size (64 bytes). This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100ReceivedOctetsIntoRouterBr 1.3.6.1.4.1.562.2.4.1.12.25.18.1.6
This attribute counts the number of octets that were not hardware switched but were passed the Router or Bridge software. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100ReceivedFramesIntoRouterBr 1.3.6.1.4.1.562.2.4.1.12.25.18.1.7
This attribute counts the number of frames which were not hardware switched but were passed to the Router or Bridge software. This counter wraps to zero after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100StatsTable 1.3.6.1.4.1.562.2.4.1.12.25.19
This group contains statistical attributes for the Ethernet component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEth100StatsEntry

lpEth100StatsEntry 1.3.6.1.4.1.562.2.4.1.12.25.19.1
An entry in the lpEth100StatsTable.
OBJECT-TYPE    
  LpEth100StatsEntry  

lpEth100AlignmentErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.2
The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100FcsErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.3
The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100SingleCollisionFrames 1.3.6.1.4.1.562.2.4.1.12.25.19.1.4
The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100MultipleCollisionFrames 1.3.6.1.4.1.562.2.4.1.12.25.19.1.5
The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100SqeTestErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.6
The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100DeferredTransmissions 1.3.6.1.4.1.562.2.4.1.12.25.19.1.7
The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100LateCollisions 1.3.6.1.4.1.562.2.4.1.12.25.19.1.8
The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100ExcessiveCollisions 1.3.6.1.4.1.562.2.4.1.12.25.19.1.9
The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100MacTransmitErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.10
The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100CarrierSenseErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.11
The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100FrameTooLongs 1.3.6.1.4.1.562.2.4.1.12.25.19.1.12
The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpEth100MacReceiveErrors 1.3.6.1.4.1.562.2.4.1.12.25.19.1.13
The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter will wrap around after it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

la 1.3.6.1.4.1.562.2.4.1.105
OBJECT IDENTIFIER    

laRowStatusTable 1.3.6.1.4.1.562.2.4.1.105.1
This entry controls the addition and deletion of la components.
OBJECT-TYPE    
  SEQUENCE OF  
    LaRowStatusEntry

laRowStatusEntry 1.3.6.1.4.1.562.2.4.1.105.1.1
A single entry in the table represents a single la component.
OBJECT-TYPE    
  LaRowStatusEntry  

laRowStatus 1.3.6.1.4.1.562.2.4.1.105.1.1.1
This variable is used as the basis for SNMP naming of la components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

laComponentName 1.3.6.1.4.1.562.2.4.1.105.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

laStorageType 1.3.6.1.4.1.562.2.4.1.105.1.1.4
This variable represents the storage type value for the la tables.
OBJECT-TYPE    
  StorageType  

laIndex 1.3.6.1.4.1.562.2.4.1.105.1.1.10
This variable represents the index for the la tables.
OBJECT-TYPE    
  Integer32 0..255  

laFramer 1.3.6.1.4.1.562.2.4.1.105.2
OBJECT IDENTIFIER    

laFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.105.2.1
This entry controls the addition and deletion of laFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    LaFramerRowStatusEntry

laFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.105.2.1.1
A single entry in the table represents a single laFramer component.
OBJECT-TYPE    
  LaFramerRowStatusEntry  

laFramerRowStatus 1.3.6.1.4.1.562.2.4.1.105.2.1.1.1
This variable is used as the basis for SNMP naming of laFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

laFramerComponentName 1.3.6.1.4.1.562.2.4.1.105.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

laFramerStorageType 1.3.6.1.4.1.562.2.4.1.105.2.1.1.4
This variable represents the storage type value for the laFramer tables.
OBJECT-TYPE    
  StorageType  

laFramerIndex 1.3.6.1.4.1.562.2.4.1.105.2.1.1.10
This variable represents the index for the laFramer tables.
OBJECT-TYPE    
  NonReplicated  

laFramerProvTable 1.3.6.1.4.1.562.2.4.1.105.2.10
This group contains the link to the Lan interface such as Ethernet, Fddi, or TokenRing.
OBJECT-TYPE    
  SEQUENCE OF  
    LaFramerProvEntry

laFramerProvEntry 1.3.6.1.4.1.562.2.4.1.105.2.10.1
An entry in the laFramerProvTable.
OBJECT-TYPE    
  LaFramerProvEntry  

laFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.105.2.10.1.1
This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. This attribute is OBSOLETED and is redefined above as InterfaceName. The new attribute type is a LIST OF LINK with a maximum of two (2) HW components in a list. DESCRIPTION
OBJECT-TYPE    
  Link  

laFramerInterfaceNamesTable 1.3.6.1.4.1.562.2.4.1.105.2.431
This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. Only one (1) LAN interface can be linked to a Framer except for Ethernet100BaseT LAN interface, for which up to two (2) interfaces residing on the same LogicalProcessor can be linked. DESCRIPTION
OBJECT-TYPE    
  SEQUENCE OF  
    LaFramerInterfaceNamesEntry

laFramerInterfaceNamesEntry 1.3.6.1.4.1.562.2.4.1.105.2.431.1
An entry in the laFramerInterfaceNamesTable.
OBJECT-TYPE    
  LaFramerInterfaceNamesEntry  

laFramerInterfaceNamesValue 1.3.6.1.4.1.562.2.4.1.105.2.431.1.1
This variable represents both the value and the index for the laFramerInterfaceNamesTable.
OBJECT-TYPE    
  Link  

laFramerInterfaceNamesRowStatus 1.3.6.1.4.1.562.2.4.1.105.2.431.1.2
This variable is used to control the addition and deletion of individual values of the laFramerInterfaceNamesTable.
OBJECT-TYPE    
  RowStatus  

laCidDataTable 1.3.6.1.4.1.562.2.4.1.105.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LaCidDataEntry

laCidDataEntry 1.3.6.1.4.1.562.2.4.1.105.10.1
An entry in the laCidDataTable.
OBJECT-TYPE    
  LaCidDataEntry  

laCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.105.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

laMediaProvTable 1.3.6.1.4.1.562.2.4.1.105.11
This group contains the base provisioning data for the Media Application component.
OBJECT-TYPE    
  SEQUENCE OF  
    LaMediaProvEntry

laMediaProvEntry 1.3.6.1.4.1.562.2.4.1.105.11.1
An entry in the laMediaProvTable.
OBJECT-TYPE    
  LaMediaProvEntry  

laLinkToProtocolPort 1.3.6.1.4.1.562.2.4.1.105.11.1.1
This attribute contains a protocol port component name. The attribute associates the application with a protocol port.
OBJECT-TYPE    
  Link  

laIfEntryTable 1.3.6.1.4.1.562.2.4.1.105.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LaIfEntryEntry

laIfEntryEntry 1.3.6.1.4.1.562.2.4.1.105.12.1
An entry in the laIfEntryTable.
OBJECT-TYPE    
  LaIfEntryEntry  

laIfAdminStatus 1.3.6.1.4.1.562.2.4.1.105.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

laIfIndex 1.3.6.1.4.1.562.2.4.1.105.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

laStateTable 1.3.6.1.4.1.562.2.4.1.105.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LaStateEntry

laStateEntry 1.3.6.1.4.1.562.2.4.1.105.13.1
An entry in the laStateTable.
OBJECT-TYPE    
  LaStateEntry  

laAdminState 1.3.6.1.4.1.562.2.4.1.105.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

laOperationalState 1.3.6.1.4.1.562.2.4.1.105.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

laUsageState 1.3.6.1.4.1.562.2.4.1.105.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

laOperStatusTable 1.3.6.1.4.1.562.2.4.1.105.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LaOperStatusEntry

laOperStatusEntry 1.3.6.1.4.1.562.2.4.1.105.14.1
An entry in the laOperStatusTable.
OBJECT-TYPE    
  LaOperStatusEntry  

laSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.105.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lanDriversMIB 1.3.6.1.4.1.562.2.4.2.30
OBJECT IDENTIFIER    

lanDriversGroup 1.3.6.1.4.1.562.2.4.2.30.1
OBJECT IDENTIFIER    

lanDriversGroupBE 1.3.6.1.4.1.562.2.4.2.30.1.5
OBJECT IDENTIFIER    

lanDriversGroupBE01 1.3.6.1.4.1.562.2.4.2.30.1.5.2
OBJECT IDENTIFIER    

lanDriversGroupBE01A 1.3.6.1.4.1.562.2.4.2.30.1.5.2.2
OBJECT IDENTIFIER    

lanDriversCapabilities 1.3.6.1.4.1.562.2.4.2.30.3
OBJECT IDENTIFIER    

lanDriversCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.30.3.5
OBJECT IDENTIFIER    

lanDriversCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.30.3.5.2
OBJECT IDENTIFIER    

lanDriversCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.30.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

LpEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetRowStatus  
  DisplayString as lpEnetComponentName  
  StorageType as lpEnetStorageType  
  Integer32 as lpEnetIndex  

LpEnetCidDataEntry  
SEQUENCE    
  Unsigned32 as lpEnetCustomerIdentifier  

LpEnetIfEntryEntry  
SEQUENCE    
  INTEGER as lpEnetIfAdminStatus  
  InterfaceIndex as lpEnetIfIndex  

LpEnetProvEntry  
SEQUENCE    
  INTEGER as lpEnetHeartbeatPacket  
  Link as lpEnetApplicationFramerName  

LpEnetAdminInfoEntry  
SEQUENCE    
  AsciiString as lpEnetVendor  
  AsciiString as lpEnetCommentText  

LpEnetStateEntry  
SEQUENCE    
  INTEGER as lpEnetAdminState  
  INTEGER as lpEnetOperationalState  
  INTEGER as lpEnetUsageState  

LpEnetOperStatusEntry  
SEQUENCE    
  INTEGER as lpEnetSnmpOperStatus  

LpEnetOperEntry  
SEQUENCE    
  MacAddress as lpEnetMacAddress  

LpEnetStatsEntry  
SEQUENCE    
  Counter32 as lpEnetAlignmentErrors  
  Counter32 as lpEnetFcsErrors  
  Counter32 as lpEnetSingleCollisionFrames  
  Counter32 as lpEnetMultipleCollisionFrames  
  Counter32 as lpEnetSqeTestErrors  
  Counter32 as lpEnetDeferredTransmissions  
  Counter32 as lpEnetLateCollisions  
  Counter32 as lpEnetExcessiveCollisions  
  Counter32 as lpEnetMacTransmitErrors  
  Counter32 as lpEnetCarrierSenseErrors  
  Counter32 as lpEnetFrameTooLongs  
  Counter32 as lpEnetMacReceiveErrors  

LpEnetLtRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtRowStatus  
  DisplayString as lpEnetLtComponentName  
  StorageType as lpEnetLtStorageType  
  NonReplicated as lpEnetLtIndex  

LpEnetLtTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtTData  

LpEnetLtFrmCmpRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFrmCmpRowStatus  
  DisplayString as lpEnetLtFrmCmpComponentName  
  StorageType as lpEnetLtFrmCmpStorageType  
  NonReplicated as lpEnetLtFrmCmpIndex  

LpEnetLtFrmCmpTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFrmCmpTData  

LpEnetLtFrmCpyRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFrmCpyRowStatus  
  DisplayString as lpEnetLtFrmCpyComponentName  
  StorageType as lpEnetLtFrmCpyStorageType  
  NonReplicated as lpEnetLtFrmCpyIndex  

LpEnetLtFrmCpyTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFrmCpyTData  

LpEnetLtPrtCfgRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtPrtCfgRowStatus  
  DisplayString as lpEnetLtPrtCfgComponentName  
  StorageType as lpEnetLtPrtCfgStorageType  
  NonReplicated as lpEnetLtPrtCfgIndex  

LpEnetLtPrtCfgTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtPrtCfgTData  

LpEnetLtFbRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbRowStatus  
  DisplayString as lpEnetLtFbComponentName  
  StorageType as lpEnetLtFbStorageType  
  NonReplicated as lpEnetLtFbIndex  

LpEnetLtFbTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbTData  

LpEnetLtFbTxInfoRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbTxInfoRowStatus  
  DisplayString as lpEnetLtFbTxInfoComponentName  
  StorageType as lpEnetLtFbTxInfoStorageType  
  NonReplicated as lpEnetLtFbTxInfoIndex  

LpEnetLtFbTxInfoTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbTxInfoTData  

LpEnetLtFbFddiMacRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbFddiMacRowStatus  
  DisplayString as lpEnetLtFbFddiMacComponentName  
  StorageType as lpEnetLtFbFddiMacStorageType  
  NonReplicated as lpEnetLtFbFddiMacIndex  

LpEnetLtFbFddiMacTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbFddiMacTData  

LpEnetLtFbMacEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbMacEnetRowStatus  
  DisplayString as lpEnetLtFbMacEnetComponentName  
  StorageType as lpEnetLtFbMacEnetStorageType  
  NonReplicated as lpEnetLtFbMacEnetIndex  

LpEnetLtFbMacEnetTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbMacEnetTData  

LpEnetLtFbMacTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbMacTrRowStatus  
  DisplayString as lpEnetLtFbMacTrComponentName  
  StorageType as lpEnetLtFbMacTrStorageType  
  NonReplicated as lpEnetLtFbMacTrIndex  

LpEnetLtFbMacTrTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbMacTrTData  

LpEnetLtFbDataRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbDataRowStatus  
  DisplayString as lpEnetLtFbDataComponentName  
  StorageType as lpEnetLtFbDataStorageType  
  NonReplicated as lpEnetLtFbDataIndex  

LpEnetLtFbDataTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbDataTData  

LpEnetLtFbIpHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbIpHRowStatus  
  DisplayString as lpEnetLtFbIpHComponentName  
  StorageType as lpEnetLtFbIpHStorageType  
  NonReplicated as lpEnetLtFbIpHIndex  

LpEnetLtFbIpHTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbIpHTData  

LpEnetLtFbLlchRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbLlchRowStatus  
  DisplayString as lpEnetLtFbLlchComponentName  
  StorageType as lpEnetLtFbLlchStorageType  
  NonReplicated as lpEnetLtFbLlchIndex  

LpEnetLtFbLlchTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbLlchTData  

LpEnetLtFbAppleHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbAppleHRowStatus  
  DisplayString as lpEnetLtFbAppleHComponentName  
  StorageType as lpEnetLtFbAppleHStorageType  
  NonReplicated as lpEnetLtFbAppleHIndex  

LpEnetLtFbAppleHTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbAppleHTData  

LpEnetLtFbIpxHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtFbIpxHRowStatus  
  DisplayString as lpEnetLtFbIpxHComponentName  
  StorageType as lpEnetLtFbIpxHStorageType  
  NonReplicated as lpEnetLtFbIpxHIndex  

LpEnetLtFbIpxHTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtFbIpxHTData  

LpEnetLtCntlRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetLtCntlRowStatus  
  DisplayString as lpEnetLtCntlComponentName  
  StorageType as lpEnetLtCntlStorageType  
  NonReplicated as lpEnetLtCntlIndex  

LpEnetLtCntlTopEntry  
SEQUENCE    
  AsciiString as lpEnetLtCntlTData  

LpEnetTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpEnetTestRowStatus  
  DisplayString as lpEnetTestComponentName  
  StorageType as lpEnetTestStorageType  
  NonReplicated as lpEnetTestIndex  

LpEnetTestPTOEntry  
SEQUENCE    
  INTEGER as lpEnetTestType  
  Unsigned32 as lpEnetTestFrmSize  
  Unsigned32 as lpEnetTestDuration  

LpEnetTestResultsEntry  
SEQUENCE    
  Counter32 as lpEnetTestElapsedTime  
  Unsigned32 as lpEnetTestTimeRemaining  
  INTEGER as lpEnetTestCauseOfTermination  
  PassportCounter64 as lpEnetTestFrmTx  
  PassportCounter64 as lpEnetTestBitsTx  
  PassportCounter64 as lpEnetTestFrmRx  
  PassportCounter64 as lpEnetTestBitsRx  
  PassportCounter64 as lpEnetTestErroredFrmRx  

LpFiRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiRowStatus  
  DisplayString as lpFiComponentName  
  StorageType as lpFiStorageType  
  Integer32 as lpFiIndex  

LpFiCidDataEntry  
SEQUENCE    
  Unsigned32 as lpFiCustomerIdentifier  

LpFiIfEntryEntry  
SEQUENCE    
  INTEGER as lpFiIfAdminStatus  
  InterfaceIndex as lpFiIfIndex  

LpFiSmtProvEntry  
SEQUENCE    
  AsciiString as lpFiUserData  
  INTEGER as lpFiAcceptAa  
  INTEGER as lpFiAcceptBb  
  INTEGER as lpFiAcceptAs  
  INTEGER as lpFiAcceptBs  
  INTEGER as lpFiAcceptAm  
  INTEGER as lpFiAcceptBm  
  INTEGER as lpFiUseThruBa  
  Unsigned32 as lpFiNeighborNotifyInterval  
  INTEGER as lpFiStatusReportPolicy  
  FddiTimeMilli as lpFiTraceMaxExpirationTimer  
  Link as lpFiApplicationFramerName  

LpFiMacProvEntry  
SEQUENCE    
  FddiTimeNano as lpFiTokenRequestTimer  
  FddiTimeNano as lpFiTokenMaxTimer  
  FddiTimeNano as lpFiValidTransmissionTimer  

LpFiAdminInfoEntry  
SEQUENCE    
  AsciiString as lpFiVendor  
  AsciiString as lpFiCommentText  

LpFiStateEntry  
SEQUENCE    
  INTEGER as lpFiAdminState  
  INTEGER as lpFiOperationalState  
  INTEGER as lpFiUsageState  

LpFiOperStatusEntry  
SEQUENCE    
  INTEGER as lpFiSnmpOperStatus  

LpFiSmtOperEntry  
SEQUENCE    
  AsciiString as lpFiVersion  
  INTEGER as lpFiBypassPresent  
  INTEGER as lpFiEcmState  
  INTEGER as lpFiCfState  

LpFiMacOperEntry  
SEQUENCE    
  Gauge32 as lpFiRingLatency  
  FddiMACLongAddressType as lpFiMacAddress  
  FddiMACLongAddressType as lpFiUpstreamNeighbor  
  FddiMACLongAddressType as lpFiDownstreamNeighbor  
  FddiMACLongAddressType as lpFiOldUpstreamNeighbor  
  FddiMACLongAddressType as lpFiOldDownstreamNeighbor  
  INTEGER as lpFiDupAddressTest  
  FddiTimeNano as lpFiTokenNegotiatedTimer  
  Counter32 as lpFiFrameCounts  
  Counter32 as lpFiCopiedCounts  
  Counter32 as lpFiTransmitCounts  
  Counter32 as lpFiErrorCounts  
  Counter32 as lpFiLostCounts  
  INTEGER as lpFiRmtState  
  INTEGER as lpFiFrameErrorFlag  

LpFiMacCOperEntry  
SEQUENCE    
  Counter32 as lpFiTokenCounts  
  Counter32 as lpFiTvxExpiredCounts  
  Counter32 as lpFiNotCopiedCounts  
  Counter32 as lpFiLateCounts  
  Counter32 as lpFiRingOpCounts  

LpFiNcMacOperEntry  
SEQUENCE    
  MacAddress as lpFiNcMacAddress  
  MacAddress as lpFiNcUpstreamNeighbor  
  MacAddress as lpFiNcDownstreamNeighbor  
  MacAddress as lpFiNcOldUpstreamNeighbor  
  MacAddress as lpFiNcOldDownstreamNeighbor  

LpFiLtRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtRowStatus  
  DisplayString as lpFiLtComponentName  
  StorageType as lpFiLtStorageType  
  NonReplicated as lpFiLtIndex  

LpFiLtTopEntry  
SEQUENCE    
  AsciiString as lpFiLtTData  

LpFiLtFrmCmpRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFrmCmpRowStatus  
  DisplayString as lpFiLtFrmCmpComponentName  
  StorageType as lpFiLtFrmCmpStorageType  
  NonReplicated as lpFiLtFrmCmpIndex  

LpFiLtFrmCmpTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFrmCmpTData  

LpFiLtFrmCpyRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFrmCpyRowStatus  
  DisplayString as lpFiLtFrmCpyComponentName  
  StorageType as lpFiLtFrmCpyStorageType  
  NonReplicated as lpFiLtFrmCpyIndex  

LpFiLtFrmCpyTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFrmCpyTData  

LpFiLtPrtCfgRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtPrtCfgRowStatus  
  DisplayString as lpFiLtPrtCfgComponentName  
  StorageType as lpFiLtPrtCfgStorageType  
  NonReplicated as lpFiLtPrtCfgIndex  

LpFiLtPrtCfgTopEntry  
SEQUENCE    
  AsciiString as lpFiLtPrtCfgTData  

LpFiLtFbRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbRowStatus  
  DisplayString as lpFiLtFbComponentName  
  StorageType as lpFiLtFbStorageType  
  NonReplicated as lpFiLtFbIndex  

LpFiLtFbTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbTData  

LpFiLtFbTxInfoRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbTxInfoRowStatus  
  DisplayString as lpFiLtFbTxInfoComponentName  
  StorageType as lpFiLtFbTxInfoStorageType  
  NonReplicated as lpFiLtFbTxInfoIndex  

LpFiLtFbTxInfoTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbTxInfoTData  

LpFiLtFbFddiMacRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbFddiMacRowStatus  
  DisplayString as lpFiLtFbFddiMacComponentName  
  StorageType as lpFiLtFbFddiMacStorageType  
  NonReplicated as lpFiLtFbFddiMacIndex  

LpFiLtFbFddiMacTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbFddiMacTData  

LpFiLtFbMacEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbMacEnetRowStatus  
  DisplayString as lpFiLtFbMacEnetComponentName  
  StorageType as lpFiLtFbMacEnetStorageType  
  NonReplicated as lpFiLtFbMacEnetIndex  

LpFiLtFbMacEnetTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbMacEnetTData  

LpFiLtFbMacTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbMacTrRowStatus  
  DisplayString as lpFiLtFbMacTrComponentName  
  StorageType as lpFiLtFbMacTrStorageType  
  NonReplicated as lpFiLtFbMacTrIndex  

LpFiLtFbMacTrTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbMacTrTData  

LpFiLtFbDataRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbDataRowStatus  
  DisplayString as lpFiLtFbDataComponentName  
  StorageType as lpFiLtFbDataStorageType  
  NonReplicated as lpFiLtFbDataIndex  

LpFiLtFbDataTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbDataTData  

LpFiLtFbIpHRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbIpHRowStatus  
  DisplayString as lpFiLtFbIpHComponentName  
  StorageType as lpFiLtFbIpHStorageType  
  NonReplicated as lpFiLtFbIpHIndex  

LpFiLtFbIpHTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbIpHTData  

LpFiLtFbLlchRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbLlchRowStatus  
  DisplayString as lpFiLtFbLlchComponentName  
  StorageType as lpFiLtFbLlchStorageType  
  NonReplicated as lpFiLtFbLlchIndex  

LpFiLtFbLlchTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbLlchTData  

LpFiLtFbAppleHRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbAppleHRowStatus  
  DisplayString as lpFiLtFbAppleHComponentName  
  StorageType as lpFiLtFbAppleHStorageType  
  NonReplicated as lpFiLtFbAppleHIndex  

LpFiLtFbAppleHTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbAppleHTData  

LpFiLtFbIpxHRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtFbIpxHRowStatus  
  DisplayString as lpFiLtFbIpxHComponentName  
  StorageType as lpFiLtFbIpxHStorageType  
  NonReplicated as lpFiLtFbIpxHIndex  

LpFiLtFbIpxHTopEntry  
SEQUENCE    
  AsciiString as lpFiLtFbIpxHTData  

LpFiLtCntlRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiLtCntlRowStatus  
  DisplayString as lpFiLtCntlComponentName  
  StorageType as lpFiLtCntlStorageType  
  NonReplicated as lpFiLtCntlIndex  

LpFiLtCntlTopEntry  
SEQUENCE    
  AsciiString as lpFiLtCntlTData  

LpFiPhyRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiPhyRowStatus  
  DisplayString as lpFiPhyComponentName  
  StorageType as lpFiPhyStorageType  
  INTEGER as lpFiPhyFddiPhyTypeIndex  

LpFiPhyProvEntry  
SEQUENCE    
  Unsigned32 as lpFiPhyLerCutoff  
  Unsigned32 as lpFiPhyLerAlarm  
  INTEGER as lpFiPhyLinkErrorMonitor  

LpFiPhyOperEntry  
SEQUENCE    
  INTEGER as lpFiPhyNeighborType  
  Counter32 as lpFiPhyLctFailCounts  
  Unsigned32 as lpFiPhyLerEstimate  
  Counter32 as lpFiPhyLemRejectCounts  
  Counter32 as lpFiPhyLemCounts  
  INTEGER as lpFiPhyPcmState  
  INTEGER as lpFiPhyLerFlag  
  INTEGER as lpFiPhySignalState  
  OCTET STRING as lpFiPhySignalBitsRcvd  
  OCTET STRING as lpFiPhySignalBitsTxmt  

LpFiTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpFiTestRowStatus  
  DisplayString as lpFiTestComponentName  
  StorageType as lpFiTestStorageType  
  NonReplicated as lpFiTestIndex  

LpFiTestPTOEntry  
SEQUENCE    
  INTEGER as lpFiTestType  
  Unsigned32 as lpFiTestFrmSize  
  Unsigned32 as lpFiTestDuration  

LpFiTestResultsEntry  
SEQUENCE    
  Counter32 as lpFiTestElapsedTime  
  Unsigned32 as lpFiTestTimeRemaining  
  INTEGER as lpFiTestCauseOfTermination  
  PassportCounter64 as lpFiTestFrmTx  
  PassportCounter64 as lpFiTestBitsTx  
  PassportCounter64 as lpFiTestFrmRx  
  PassportCounter64 as lpFiTestBitsRx  
  PassportCounter64 as lpFiTestErroredFrmRx  

LpTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrRowStatus  
  DisplayString as lpTrComponentName  
  StorageType as lpTrStorageType  
  Integer32 as lpTrIndex  

LpTrCidDataEntry  
SEQUENCE    
  Unsigned32 as lpTrCustomerIdentifier  

LpTrIfEntryEntry  
SEQUENCE    
  INTEGER as lpTrIfAdminStatus  
  InterfaceIndex as lpTrIfIndex  

LpTrProvEntry  
SEQUENCE    
  INTEGER as lpTrRingSpeed  
  INTEGER as lpTrMonitorParticipate  
  MacAddress as lpTrFunctionalAddress  
  MacAddress as lpTrNodeAddress  
  MacAddress as lpTrGroupAddress  
  AsciiString as lpTrProductId  
  Link as lpTrApplicationFramerName  

LpTrAdminInfoEntry  
SEQUENCE    
  AsciiString as lpTrVendor  
  AsciiString as lpTrCommentText  

LpTrStateEntry  
SEQUENCE    
  INTEGER as lpTrAdminState  
  INTEGER as lpTrOperationalState  
  INTEGER as lpTrUsageState  

LpTrOperStatusEntry  
SEQUENCE    
  INTEGER as lpTrSnmpOperStatus  

LpTrOperEntry  
SEQUENCE    
  MacAddress as lpTrMacAddress  
  INTEGER as lpTrRingState  
  OCTET STRING as lpTrRingStatus  
  INTEGER as lpTrRingOpenStatus  
  MacAddress as lpTrUpStream  
  INTEGER as lpTrChipSet  
  EnterpriseDateAndTime as lpTrLastTimeBeaconSent  

LpTrStatsEntry  
SEQUENCE    
  Counter32 as lpTrLineErrors  
  Counter32 as lpTrBurstErrors  
  Counter32 as lpTrAcErrors  
  Counter32 as lpTrAbortTransErrors  
  Counter32 as lpTrInternalErrors  
  Counter32 as lpTrLostFrameErrors  
  Counter32 as lpTrReceiveCongestions  
  Counter32 as lpTrFrameCopiedErrors  
  Counter32 as lpTrTokenErrors  
  Counter32 as lpTrSoftErrors  
  Counter32 as lpTrHardErrors  
  Counter32 as lpTrSignalLoss  
  Counter32 as lpTrTransmitBeacons  
  Counter32 as lpTrRingRecoverys  
  Counter32 as lpTrLobeWires  
  Counter32 as lpTrRemoveRings  
  Counter32 as lpTrSingleStation  
  Counter32 as lpTrFreqErrors  

LpTrNcMacOperEntry  
SEQUENCE    
  MacAddress as lpTrNcMacAddress  
  MacAddress as lpTrNcUpStream  

LpTrLtRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtRowStatus  
  DisplayString as lpTrLtComponentName  
  StorageType as lpTrLtStorageType  
  NonReplicated as lpTrLtIndex  

LpTrLtTopEntry  
SEQUENCE    
  AsciiString as lpTrLtTData  

LpTrLtFrmCmpRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFrmCmpRowStatus  
  DisplayString as lpTrLtFrmCmpComponentName  
  StorageType as lpTrLtFrmCmpStorageType  
  NonReplicated as lpTrLtFrmCmpIndex  

LpTrLtFrmCmpTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFrmCmpTData  

LpTrLtFrmCpyRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFrmCpyRowStatus  
  DisplayString as lpTrLtFrmCpyComponentName  
  StorageType as lpTrLtFrmCpyStorageType  
  NonReplicated as lpTrLtFrmCpyIndex  

LpTrLtFrmCpyTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFrmCpyTData  

LpTrLtPrtCfgRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtPrtCfgRowStatus  
  DisplayString as lpTrLtPrtCfgComponentName  
  StorageType as lpTrLtPrtCfgStorageType  
  NonReplicated as lpTrLtPrtCfgIndex  

LpTrLtPrtCfgTopEntry  
SEQUENCE    
  AsciiString as lpTrLtPrtCfgTData  

LpTrLtFbRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbRowStatus  
  DisplayString as lpTrLtFbComponentName  
  StorageType as lpTrLtFbStorageType  
  NonReplicated as lpTrLtFbIndex  

LpTrLtFbTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbTData  

LpTrLtFbTxInfoRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbTxInfoRowStatus  
  DisplayString as lpTrLtFbTxInfoComponentName  
  StorageType as lpTrLtFbTxInfoStorageType  
  NonReplicated as lpTrLtFbTxInfoIndex  

LpTrLtFbTxInfoTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbTxInfoTData  

LpTrLtFbFddiMacRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbFddiMacRowStatus  
  DisplayString as lpTrLtFbFddiMacComponentName  
  StorageType as lpTrLtFbFddiMacStorageType  
  NonReplicated as lpTrLtFbFddiMacIndex  

LpTrLtFbFddiMacTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbFddiMacTData  

LpTrLtFbMacEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbMacEnetRowStatus  
  DisplayString as lpTrLtFbMacEnetComponentName  
  StorageType as lpTrLtFbMacEnetStorageType  
  NonReplicated as lpTrLtFbMacEnetIndex  

LpTrLtFbMacEnetTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbMacEnetTData  

LpTrLtFbMacTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbMacTrRowStatus  
  DisplayString as lpTrLtFbMacTrComponentName  
  StorageType as lpTrLtFbMacTrStorageType  
  NonReplicated as lpTrLtFbMacTrIndex  

LpTrLtFbMacTrTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbMacTrTData  

LpTrLtFbDataRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbDataRowStatus  
  DisplayString as lpTrLtFbDataComponentName  
  StorageType as lpTrLtFbDataStorageType  
  NonReplicated as lpTrLtFbDataIndex  

LpTrLtFbDataTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbDataTData  

LpTrLtFbIpHRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbIpHRowStatus  
  DisplayString as lpTrLtFbIpHComponentName  
  StorageType as lpTrLtFbIpHStorageType  
  NonReplicated as lpTrLtFbIpHIndex  

LpTrLtFbIpHTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbIpHTData  

LpTrLtFbLlchRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbLlchRowStatus  
  DisplayString as lpTrLtFbLlchComponentName  
  StorageType as lpTrLtFbLlchStorageType  
  NonReplicated as lpTrLtFbLlchIndex  

LpTrLtFbLlchTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbLlchTData  

LpTrLtFbAppleHRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbAppleHRowStatus  
  DisplayString as lpTrLtFbAppleHComponentName  
  StorageType as lpTrLtFbAppleHStorageType  
  NonReplicated as lpTrLtFbAppleHIndex  

LpTrLtFbAppleHTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbAppleHTData  

LpTrLtFbIpxHRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtFbIpxHRowStatus  
  DisplayString as lpTrLtFbIpxHComponentName  
  StorageType as lpTrLtFbIpxHStorageType  
  NonReplicated as lpTrLtFbIpxHIndex  

LpTrLtFbIpxHTopEntry  
SEQUENCE    
  AsciiString as lpTrLtFbIpxHTData  

LpTrLtCntlRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrLtCntlRowStatus  
  DisplayString as lpTrLtCntlComponentName  
  StorageType as lpTrLtCntlStorageType  
  NonReplicated as lpTrLtCntlIndex  

LpTrLtCntlTopEntry  
SEQUENCE    
  AsciiString as lpTrLtCntlTData  

LpTrTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpTrTestRowStatus  
  DisplayString as lpTrTestComponentName  
  StorageType as lpTrTestStorageType  
  NonReplicated as lpTrTestIndex  

LpTrTestPTOEntry  
SEQUENCE    
  INTEGER as lpTrTestType  
  Unsigned32 as lpTrTestFrmSize  
  Unsigned32 as lpTrTestDuration  

LpTrTestResultsEntry  
SEQUENCE    
  Counter32 as lpTrTestElapsedTime  
  Unsigned32 as lpTrTestTimeRemaining  
  INTEGER as lpTrTestCauseOfTermination  
  PassportCounter64 as lpTrTestFrmTx  
  PassportCounter64 as lpTrTestBitsTx  
  PassportCounter64 as lpTrTestFrmRx  
  PassportCounter64 as lpTrTestBitsRx  
  PassportCounter64 as lpTrTestErroredFrmRx  

LpIlsFwdrRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrRowStatus  
  DisplayString as lpIlsFwdrComponentName  
  StorageType as lpIlsFwdrStorageType  
  Integer32 as lpIlsFwdrIndex  

LpIlsFwdrIfEntryEntry  
SEQUENCE    
  INTEGER as lpIlsFwdrIfAdminStatus  
  InterfaceIndex as lpIlsFwdrIfIndex  

LpIlsFwdrStateEntry  
SEQUENCE    
  INTEGER as lpIlsFwdrAdminState  
  INTEGER as lpIlsFwdrOperationalState  
  INTEGER as lpIlsFwdrUsageState  

LpIlsFwdrOperStatusEntry  
SEQUENCE    
  INTEGER as lpIlsFwdrSnmpOperStatus  

LpIlsFwdrStatsEntry  
SEQUENCE    
  PassportCounter64 as lpIlsFwdrFramesReceived  
  PassportCounter64 as lpIlsFwdrProcessedCount  
  PassportCounter64 as lpIlsFwdrErrorCount  
  PassportCounter64 as lpIlsFwdrFramesDiscarded  

LpIlsFwdrLinkToTrafficSourceEntry  
SEQUENCE    
  Link as lpIlsFwdrLinkToTrafficSourceValue  

LpIlsFwdrLtRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtRowStatus  
  DisplayString as lpIlsFwdrLtComponentName  
  StorageType as lpIlsFwdrLtStorageType  
  NonReplicated as lpIlsFwdrLtIndex  

LpIlsFwdrLtTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtTData  

LpIlsFwdrLtFrmCmpRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFrmCmpRowStatus  
  DisplayString as lpIlsFwdrLtFrmCmpComponentName  
  StorageType as lpIlsFwdrLtFrmCmpStorageType  
  NonReplicated as lpIlsFwdrLtFrmCmpIndex  

LpIlsFwdrLtFrmCmpTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFrmCmpTData  

LpIlsFwdrLtFrmCpyRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFrmCpyRowStatus  
  DisplayString as lpIlsFwdrLtFrmCpyComponentName  
  StorageType as lpIlsFwdrLtFrmCpyStorageType  
  NonReplicated as lpIlsFwdrLtFrmCpyIndex  

LpIlsFwdrLtFrmCpyTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFrmCpyTData  

LpIlsFwdrLtPrtCfgRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtPrtCfgRowStatus  
  DisplayString as lpIlsFwdrLtPrtCfgComponentName  
  StorageType as lpIlsFwdrLtPrtCfgStorageType  
  NonReplicated as lpIlsFwdrLtPrtCfgIndex  

LpIlsFwdrLtPrtCfgTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtPrtCfgTData  

LpIlsFwdrLtFbRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbRowStatus  
  DisplayString as lpIlsFwdrLtFbComponentName  
  StorageType as lpIlsFwdrLtFbStorageType  
  NonReplicated as lpIlsFwdrLtFbIndex  

LpIlsFwdrLtFbTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbTData  

LpIlsFwdrLtFbTxInfoRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbTxInfoRowStatus  
  DisplayString as lpIlsFwdrLtFbTxInfoComponentName  
  StorageType as lpIlsFwdrLtFbTxInfoStorageType  
  NonReplicated as lpIlsFwdrLtFbTxInfoIndex  

LpIlsFwdrLtFbTxInfoTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbTxInfoTData  

LpIlsFwdrLtFbFddiMacRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbFddiMacRowStatus  
  DisplayString as lpIlsFwdrLtFbFddiMacComponentName  
  StorageType as lpIlsFwdrLtFbFddiMacStorageType  
  NonReplicated as lpIlsFwdrLtFbFddiMacIndex  

LpIlsFwdrLtFbFddiMacTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbFddiMacTData  

LpIlsFwdrLtFbMacEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbMacEnetRowStatus  
  DisplayString as lpIlsFwdrLtFbMacEnetComponentName  
  StorageType as lpIlsFwdrLtFbMacEnetStorageType  
  NonReplicated as lpIlsFwdrLtFbMacEnetIndex  

LpIlsFwdrLtFbMacEnetTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbMacEnetTData  

LpIlsFwdrLtFbMacTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbMacTrRowStatus  
  DisplayString as lpIlsFwdrLtFbMacTrComponentName  
  StorageType as lpIlsFwdrLtFbMacTrStorageType  
  NonReplicated as lpIlsFwdrLtFbMacTrIndex  

LpIlsFwdrLtFbMacTrTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbMacTrTData  

LpIlsFwdrLtFbDataRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbDataRowStatus  
  DisplayString as lpIlsFwdrLtFbDataComponentName  
  StorageType as lpIlsFwdrLtFbDataStorageType  
  NonReplicated as lpIlsFwdrLtFbDataIndex  

LpIlsFwdrLtFbDataTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbDataTData  

LpIlsFwdrLtFbIpHRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbIpHRowStatus  
  DisplayString as lpIlsFwdrLtFbIpHComponentName  
  StorageType as lpIlsFwdrLtFbIpHStorageType  
  NonReplicated as lpIlsFwdrLtFbIpHIndex  

LpIlsFwdrLtFbIpHTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbIpHTData  

LpIlsFwdrLtFbLlchRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbLlchRowStatus  
  DisplayString as lpIlsFwdrLtFbLlchComponentName  
  StorageType as lpIlsFwdrLtFbLlchStorageType  
  NonReplicated as lpIlsFwdrLtFbLlchIndex  

LpIlsFwdrLtFbLlchTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbLlchTData  

LpIlsFwdrLtFbAppleHRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbAppleHRowStatus  
  DisplayString as lpIlsFwdrLtFbAppleHComponentName  
  StorageType as lpIlsFwdrLtFbAppleHStorageType  
  NonReplicated as lpIlsFwdrLtFbAppleHIndex  

LpIlsFwdrLtFbAppleHTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbAppleHTData  

LpIlsFwdrLtFbIpxHRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtFbIpxHRowStatus  
  DisplayString as lpIlsFwdrLtFbIpxHComponentName  
  StorageType as lpIlsFwdrLtFbIpxHStorageType  
  NonReplicated as lpIlsFwdrLtFbIpxHIndex  

LpIlsFwdrLtFbIpxHTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtFbIpxHTData  

LpIlsFwdrLtCntlRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrLtCntlRowStatus  
  DisplayString as lpIlsFwdrLtCntlComponentName  
  StorageType as lpIlsFwdrLtCntlStorageType  
  NonReplicated as lpIlsFwdrLtCntlIndex  

LpIlsFwdrLtCntlTopEntry  
SEQUENCE    
  AsciiString as lpIlsFwdrLtCntlTData  

LpIlsFwdrTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpIlsFwdrTestRowStatus  
  DisplayString as lpIlsFwdrTestComponentName  
  StorageType as lpIlsFwdrTestStorageType  
  NonReplicated as lpIlsFwdrTestIndex  

LpIlsFwdrTestPTOEntry  
SEQUENCE    
  INTEGER as lpIlsFwdrTestType  
  Unsigned32 as lpIlsFwdrTestFrmSize  
  Unsigned32 as lpIlsFwdrTestDuration  

LpIlsFwdrTestResultsEntry  
SEQUENCE    
  Counter32 as lpIlsFwdrTestElapsedTime  
  Unsigned32 as lpIlsFwdrTestTimeRemaining  
  INTEGER as lpIlsFwdrTestCauseOfTermination  
  PassportCounter64 as lpIlsFwdrTestFrmTx  
  PassportCounter64 as lpIlsFwdrTestBitsTx  
  PassportCounter64 as lpIlsFwdrTestFrmRx  
  PassportCounter64 as lpIlsFwdrTestBitsRx  
  PassportCounter64 as lpIlsFwdrTestErroredFrmRx  

LpEth100RowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100RowStatus  
  DisplayString as lpEth100ComponentName  
  StorageType as lpEth100StorageType  
  Integer32 as lpEth100Index  

LpEth100CidDataEntry  
SEQUENCE    
  Unsigned32 as lpEth100CustomerIdentifier  

LpEth100IfEntryEntry  
SEQUENCE    
  INTEGER as lpEth100IfAdminStatus  
  InterfaceIndex as lpEth100IfIndex  

LpEth100ProvEntry  
SEQUENCE    
  INTEGER as lpEth100DuplexMode  
  Unsigned32 as lpEth100LineSpeed  
  INTEGER as lpEth100AutoNegotiation  
  Link as lpEth100ApplicationFramerName  

LpEth100AdminInfoEntry  
SEQUENCE    
  AsciiString as lpEth100Vendor  
  AsciiString as lpEth100CommentText  

LpEth100StateEntry  
SEQUENCE    
  INTEGER as lpEth100AdminState  
  INTEGER as lpEth100OperationalState  
  INTEGER as lpEth100UsageState  

LpEth100OperStatusEntry  
SEQUENCE    
  INTEGER as lpEth100SnmpOperStatus  

LpEth100OperEntry  
SEQUENCE    
  MacAddress as lpEth100MacAddress  
  INTEGER as lpEth100AutoNegStatus  
  Unsigned32 as lpEth100ActualLineSpeed  
  INTEGER as lpEth100ActualDuplexMode  

LpEth100Eth100StatsEntry  
SEQUENCE    
  Counter32 as lpEth100FramesTransmittedOk  
  Counter32 as lpEth100FramesReceivedOk  
  Counter32 as lpEth100OctetsTransmittedOk  
  Counter32 as lpEth100OctetsReceivedOk  
  Counter32 as lpEth100UndersizeFrames  
  Counter32 as lpEth100ReceivedOctetsIntoRouterBr  
  Counter32 as lpEth100ReceivedFramesIntoRouterBr  

LpEth100StatsEntry  
SEQUENCE    
  Counter32 as lpEth100AlignmentErrors  
  Counter32 as lpEth100FcsErrors  
  Counter32 as lpEth100SingleCollisionFrames  
  Counter32 as lpEth100MultipleCollisionFrames  
  Counter32 as lpEth100SqeTestErrors  
  Counter32 as lpEth100DeferredTransmissions  
  Counter32 as lpEth100LateCollisions  
  Counter32 as lpEth100ExcessiveCollisions  
  Counter32 as lpEth100MacTransmitErrors  
  Counter32 as lpEth100CarrierSenseErrors  
  Counter32 as lpEth100FrameTooLongs  
  Counter32 as lpEth100MacReceiveErrors  

LpEth100LtRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtRowStatus  
  DisplayString as lpEth100LtComponentName  
  StorageType as lpEth100LtStorageType  
  NonReplicated as lpEth100LtIndex  

LpEth100LtTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtTData  

LpEth100LtFrmCmpRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFrmCmpRowStatus  
  DisplayString as lpEth100LtFrmCmpComponentName  
  StorageType as lpEth100LtFrmCmpStorageType  
  NonReplicated as lpEth100LtFrmCmpIndex  

LpEth100LtFrmCmpTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFrmCmpTData  

LpEth100LtFrmCpyRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFrmCpyRowStatus  
  DisplayString as lpEth100LtFrmCpyComponentName  
  StorageType as lpEth100LtFrmCpyStorageType  
  NonReplicated as lpEth100LtFrmCpyIndex  

LpEth100LtFrmCpyTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFrmCpyTData  

LpEth100LtPrtCfgRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtPrtCfgRowStatus  
  DisplayString as lpEth100LtPrtCfgComponentName  
  StorageType as lpEth100LtPrtCfgStorageType  
  NonReplicated as lpEth100LtPrtCfgIndex  

LpEth100LtPrtCfgTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtPrtCfgTData  

LpEth100LtFbRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbRowStatus  
  DisplayString as lpEth100LtFbComponentName  
  StorageType as lpEth100LtFbStorageType  
  NonReplicated as lpEth100LtFbIndex  

LpEth100LtFbTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbTData  

LpEth100LtFbTxInfoRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbTxInfoRowStatus  
  DisplayString as lpEth100LtFbTxInfoComponentName  
  StorageType as lpEth100LtFbTxInfoStorageType  
  NonReplicated as lpEth100LtFbTxInfoIndex  

LpEth100LtFbTxInfoTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbTxInfoTData  

LpEth100LtFbFddiMacRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbFddiMacRowStatus  
  DisplayString as lpEth100LtFbFddiMacComponentName  
  StorageType as lpEth100LtFbFddiMacStorageType  
  NonReplicated as lpEth100LtFbFddiMacIndex  

LpEth100LtFbFddiMacTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbFddiMacTData  

LpEth100LtFbMacEnetRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbMacEnetRowStatus  
  DisplayString as lpEth100LtFbMacEnetComponentName  
  StorageType as lpEth100LtFbMacEnetStorageType  
  NonReplicated as lpEth100LtFbMacEnetIndex  

LpEth100LtFbMacEnetTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbMacEnetTData  

LpEth100LtFbMacTrRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbMacTrRowStatus  
  DisplayString as lpEth100LtFbMacTrComponentName  
  StorageType as lpEth100LtFbMacTrStorageType  
  NonReplicated as lpEth100LtFbMacTrIndex  

LpEth100LtFbMacTrTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbMacTrTData  

LpEth100LtFbDataRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbDataRowStatus  
  DisplayString as lpEth100LtFbDataComponentName  
  StorageType as lpEth100LtFbDataStorageType  
  NonReplicated as lpEth100LtFbDataIndex  

LpEth100LtFbDataTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbDataTData  

LpEth100LtFbIpHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbIpHRowStatus  
  DisplayString as lpEth100LtFbIpHComponentName  
  StorageType as lpEth100LtFbIpHStorageType  
  NonReplicated as lpEth100LtFbIpHIndex  

LpEth100LtFbIpHTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbIpHTData  

LpEth100LtFbLlchRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbLlchRowStatus  
  DisplayString as lpEth100LtFbLlchComponentName  
  StorageType as lpEth100LtFbLlchStorageType  
  NonReplicated as lpEth100LtFbLlchIndex  

LpEth100LtFbLlchTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbLlchTData  

LpEth100LtFbAppleHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbAppleHRowStatus  
  DisplayString as lpEth100LtFbAppleHComponentName  
  StorageType as lpEth100LtFbAppleHStorageType  
  NonReplicated as lpEth100LtFbAppleHIndex  

LpEth100LtFbAppleHTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbAppleHTData  

LpEth100LtFbIpxHRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtFbIpxHRowStatus  
  DisplayString as lpEth100LtFbIpxHComponentName  
  StorageType as lpEth100LtFbIpxHStorageType  
  NonReplicated as lpEth100LtFbIpxHIndex  

LpEth100LtFbIpxHTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtFbIpxHTData  

LpEth100LtCntlRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100LtCntlRowStatus  
  DisplayString as lpEth100LtCntlComponentName  
  StorageType as lpEth100LtCntlStorageType  
  NonReplicated as lpEth100LtCntlIndex  

LpEth100LtCntlTopEntry  
SEQUENCE    
  AsciiString as lpEth100LtCntlTData  

LpEth100TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpEth100TestRowStatus  
  DisplayString as lpEth100TestComponentName  
  StorageType as lpEth100TestStorageType  
  NonReplicated as lpEth100TestIndex  

LpEth100TestPTOEntry  
SEQUENCE    
  INTEGER as lpEth100TestType  
  Unsigned32 as lpEth100TestFrmSize  
  Unsigned32 as lpEth100TestDuration  

LpEth100TestResultsEntry  
SEQUENCE    
  Counter32 as lpEth100TestElapsedTime  
  Unsigned32 as lpEth100TestTimeRemaining  
  INTEGER as lpEth100TestCauseOfTermination  
  PassportCounter64 as lpEth100TestFrmTx  
  PassportCounter64 as lpEth100TestBitsTx  
  PassportCounter64 as lpEth100TestFrmRx  
  PassportCounter64 as lpEth100TestBitsRx  
  PassportCounter64 as lpEth100TestErroredFrmRx  

LaRowStatusEntry  
SEQUENCE    
  RowStatus as laRowStatus  
  DisplayString as laComponentName  
  StorageType as laStorageType  
  Integer32 as laIndex  

LaCidDataEntry  
SEQUENCE    
  Unsigned32 as laCustomerIdentifier  

LaMediaProvEntry  
SEQUENCE    
  Link as laLinkToProtocolPort  

LaIfEntryEntry  
SEQUENCE    
  INTEGER as laIfAdminStatus  
  InterfaceIndex as laIfIndex  

LaStateEntry  
SEQUENCE    
  INTEGER as laAdminState  
  INTEGER as laOperationalState  
  INTEGER as laUsageState  

LaOperStatusEntry  
SEQUENCE    
  INTEGER as laSnmpOperStatus  

LaFramerRowStatusEntry  
SEQUENCE    
  RowStatus as laFramerRowStatus  
  DisplayString as laFramerComponentName  
  StorageType as laFramerStorageType  
  NonReplicated as laFramerIndex  

LaFramerProvEntry  
SEQUENCE    
  Link as laFramerInterfaceName  

LaFramerInterfaceNamesEntry  
SEQUENCE    
  Link as laFramerInterfaceNamesValue  
  RowStatus as laFramerInterfaceNamesRowStatus