Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB

File: Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB.mib (43695 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs DisplayString
StorageType RowStatus Unsigned32
NonReplicated Link mscSigChan
mscSigChanIndex

Defined Objects

mscSigChanEQsig 1.3.6.1.4.1.562.36.2.1.115.2
OBJECT IDENTIFIER    

mscSigChanEQsigRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.2.1
This entry controls the addition and deletion of mscSigChanEQsig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigRowStatusEntry

mscSigChanEQsigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.2.1.1
A single entry in the table represents a single mscSigChanEQsig component.
OBJECT-TYPE    
  MscSigChanEQsigRowStatusEntry  

mscSigChanEQsigRowStatus 1.3.6.1.4.1.562.36.2.1.115.2.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanEQsig components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscSigChanEQsigComponentName 1.3.6.1.4.1.562.36.2.1.115.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscSigChanEQsigStorageType 1.3.6.1.4.1.562.36.2.1.115.2.1.1.4
This variable represents the storage type value for the mscSigChanEQsig tables.
OBJECT-TYPE    
  StorageType  

mscSigChanEQsigIndex 1.3.6.1.4.1.562.36.2.1.115.2.1.1.10
This variable represents the index for the mscSigChanEQsig tables.
OBJECT-TYPE    
  NonReplicated  

mscSigChanEQsigFramer 1.3.6.1.4.1.562.36.2.1.115.2.2
OBJECT IDENTIFIER    

mscSigChanEQsigFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.2.2.1
This entry controls the addition and deletion of mscSigChanEQsigFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigFramerRowStatusEntry

mscSigChanEQsigFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1
A single entry in the table represents a single mscSigChanEQsigFramer component.
OBJECT-TYPE    
  MscSigChanEQsigFramerRowStatusEntry  

mscSigChanEQsigFramerRowStatus 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanEQsigFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscSigChanEQsigFramerComponentName 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscSigChanEQsigFramerStorageType 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.4
This variable represents the storage type value for the mscSigChanEQsigFramer tables.
OBJECT-TYPE    
  StorageType  

mscSigChanEQsigFramerIndex 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.10
This variable represents the index for the mscSigChanEQsigFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscSigChanEQsigFramerProvTable 1.3.6.1.4.1.562.36.2.1.115.2.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigFramerProvEntry

mscSigChanEQsigFramerProvEntry 1.3.6.1.4.1.562.36.2.1.115.2.2.10.1
An entry in the mscSigChanEQsigFramerProvTable.
OBJECT-TYPE    
  MscSigChanEQsigFramerProvEntry  

mscSigChanEQsigFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.115.2.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

mscSigChanEQsigFramerStateTable 1.3.6.1.4.1.562.36.2.1.115.2.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigFramerStateEntry

mscSigChanEQsigFramerStateEntry 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1
An entry in the mscSigChanEQsigFramerStateTable.
OBJECT-TYPE    
  MscSigChanEQsigFramerStateEntry  

mscSigChanEQsigFramerAdminState 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanEQsigFramerOperationalState 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanEQsigFramerUsageState 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanEQsigFramerStatsTable 1.3.6.1.4.1.562.36.2.1.115.2.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigFramerStatsEntry

mscSigChanEQsigFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1
An entry in the mscSigChanEQsigFramerStatsTable.
OBJECT-TYPE    
  MscSigChanEQsigFramerStatsEntry  

mscSigChanEQsigFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerAborts 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerOverruns 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerUnderruns 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigL2Table 1.3.6.1.4.1.562.36.2.1.115.2.11
This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigL2Entry

mscSigChanEQsigL2Entry 1.3.6.1.4.1.562.36.2.1.115.2.11.1
An entry in the mscSigChanEQsigL2Table.
OBJECT-TYPE    
  MscSigChanEQsigL2Entry  

mscSigChanEQsigT23 1.3.6.1.4.1.562.36.2.1.115.2.11.1.1
This attribute specifies the layer 2 enable request timer.
OBJECT-TYPE    
  Unsigned32 1..15  

mscSigChanEQsigT200 1.3.6.1.4.1.562.36.2.1.115.2.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..20  

mscSigChanEQsigN200 1.3.6.1.4.1.562.36.2.1.115.2.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
OBJECT-TYPE    
  Unsigned32 1..8  

mscSigChanEQsigT203 1.3.6.1.4.1.562.36.2.1.115.2.11.1.4
This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
OBJECT-TYPE    
  Unsigned32 2..40  

mscSigChanEQsigCircuitSwitchedK 1.3.6.1.4.1.562.36.2.1.115.2.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
OBJECT-TYPE    
  Unsigned32 1..127  

mscSigChanEQsigL3Table 1.3.6.1.4.1.562.36.2.1.115.2.12
This group represents the provisionable Layer 3 timer attributes of the ETSI Qsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigL3Entry

mscSigChanEQsigL3Entry 1.3.6.1.4.1.562.36.2.1.115.2.12.1
An entry in the mscSigChanEQsigL3Table.
OBJECT-TYPE    
  MscSigChanEQsigL3Entry  

mscSigChanEQsigT309 1.3.6.1.4.1.562.36.2.1.115.2.12.1.3
This attribute specifies the data link failure timer; used to ride out temporary failures.
OBJECT-TYPE    
  Unsigned32 15..120  

mscSigChanEQsigT310 1.3.6.1.4.1.562.36.2.1.115.2.12.1.4
This attribute specifies the call proceeding state timer.
OBJECT-TYPE    
  Unsigned32 10..120  

mscSigChanEQsigProvTable 1.3.6.1.4.1.562.36.2.1.115.2.13
This group defines the general options of the D-channel signalling link.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigProvEntry

mscSigChanEQsigProvEntry 1.3.6.1.4.1.562.36.2.1.115.2.13.1
An entry in the mscSigChanEQsigProvTable.
OBJECT-TYPE    
  MscSigChanEQsigProvEntry  

mscSigChanEQsigSide 1.3.6.1.4.1.562.36.2.1.115.2.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. If this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
OBJECT-TYPE    
  INTEGER network(1), user(2)  

mscSigChanEQsigMaxNonCallConcurrent 1.3.6.1.4.1.562.36.2.1.115.2.13.1.2
This attribute specifies the maximum number of simultaneous active non-call messages that are allowed.
OBJECT-TYPE    
  Unsigned32 1..30  

mscSigChanEQsigOverlapSendingEnabled 1.3.6.1.4.1.562.36.2.1.115.2.13.1.3
This attribute specifies whether overlap sending to the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscSigChanEQsigOverlapReceivingEnabled 1.3.6.1.4.1.562.36.2.1.115.2.13.1.4
This attribute specifies whether overlap receiving from the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscSigChanEQsigStateTable 1.3.6.1.4.1.562.36.2.1.115.2.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigStateEntry

mscSigChanEQsigStateEntry 1.3.6.1.4.1.562.36.2.1.115.2.14.1
An entry in the mscSigChanEQsigStateTable.
OBJECT-TYPE    
  MscSigChanEQsigStateEntry  

mscSigChanEQsigAdminState 1.3.6.1.4.1.562.36.2.1.115.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanEQsigOperationalState 1.3.6.1.4.1.562.36.2.1.115.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanEQsigUsageState 1.3.6.1.4.1.562.36.2.1.115.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanEQsigStatsTable 1.3.6.1.4.1.562.36.2.1.115.2.15
This group provides the operational components for the EtsiQsig component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigStatsEntry

mscSigChanEQsigStatsEntry 1.3.6.1.4.1.562.36.2.1.115.2.15.1
An entry in the mscSigChanEQsigStatsTable.
OBJECT-TYPE    
  MscSigChanEQsigStatsEntry  

mscSigChanEQsigTotalCallsToIf 1.3.6.1.4.1.562.36.2.1.115.2.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigTotalCallsFromIf 1.3.6.1.4.1.562.36.2.1.115.2.15.1.3
This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigNonCallAssocSessionsToIf 1.3.6.1.4.1.562.36.2.1.115.2.15.1.4
This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.36.2.1.115.2.15.1.5
This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigOperTable 1.3.6.1.4.1.562.36.2.1.115.2.16
This group provides the operational attributes for the EtsiQsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigOperEntry

mscSigChanEQsigOperEntry 1.3.6.1.4.1.562.36.2.1.115.2.16.1
An entry in the mscSigChanEQsigOperTable.
OBJECT-TYPE    
  MscSigChanEQsigOperEntry  

mscSigChanEQsigActiveChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.2
This attribute indicates the number of channels that are currently carrying voice.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.3
This attribute indicates the number of channels that are currently carrying data. This does not include modem data.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigPeakActiveChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigPeakActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.5
This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigPeakActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.2.16.1.6
This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

mscSigChanEQsigDChanStatus 1.3.6.1.4.1.562.36.2.1.115.2.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei-initialized.
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

mscSigChanEQsigToolsTable 1.3.6.1.4.1.562.36.2.1.115.2.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigToolsEntry

mscSigChanEQsigToolsEntry 1.3.6.1.4.1.562.36.2.1.115.2.17.1
An entry in the mscSigChanEQsigToolsTable.
OBJECT-TYPE    
  MscSigChanEQsigToolsEntry  

mscSigChanEQsigTracing 1.3.6.1.4.1.562.36.2.1.115.2.17.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscSigChanEQsigEQsigSpecificProvTable 1.3.6.1.4.1.562.36.2.1.115.2.18
This group provides EtsiQsig protocol specific provisioning.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigEQsigSpecificProvEntry

mscSigChanEQsigEQsigSpecificProvEntry 1.3.6.1.4.1.562.36.2.1.115.2.18.1
An entry in the mscSigChanEQsigEQsigSpecificProvTable.
OBJECT-TYPE    
  MscSigChanEQsigEQsigSpecificProvEntry  

mscSigChanEQsigMsgSegmentation 1.3.6.1.4.1.562.36.2.1.115.2.18.1.1
This attribute allows users to enable/disable the EtsiQsig message segmentation service.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscSigChanEQsigE1ChannelNumbers 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2
This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbers on the E1 link. When the attribute value is skip16, channel numbers map directly to actual E1 timeslots; therefore only channel numbers 1 - 15 and 17 - 31 are expected. When the value is contiguous, channel numbers from 1 - 30 are expected, and the following mapping is used: channels 1 - 15 are mapped to timeslots 1 - 15, and channels 16 - 30 are mapped to timeslots 17 - 31. On T1 interfaces, channel numbers are always expected in the range 1 - 23.
OBJECT-TYPE    
  INTEGER skip16(1), contiguous(2)  

mscSigChanEQsigEQsigSpecificOpTable 1.3.6.1.4.1.562.36.2.1.115.2.19
This group provides specific operational attributes for the Etsi Qsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEQsigEQsigSpecificOpEntry

mscSigChanEQsigEQsigSpecificOpEntry 1.3.6.1.4.1.562.36.2.1.115.2.19.1
An entry in the mscSigChanEQsigEQsigSpecificOpTable.
OBJECT-TYPE    
  MscSigChanEQsigEQsigSpecificOpEntry  

mscSigChanEQsigSegmentationAccepted 1.3.6.1.4.1.562.36.2.1.115.2.19.1.1
This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and forwarded to a Passport subnet. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscSigChanEQsigSegmentationFailed 1.3.6.1.4.1.562.36.2.1.115.2.19.1.2
This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and could not be forwarded as is to a Passport subnet due to end-to-end incompatibility. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vnetEtsiQsigMIB 1.3.6.1.4.1.562.36.2.2.110
OBJECT IDENTIFIER    

vnetEtsiQsigGroup 1.3.6.1.4.1.562.36.2.2.110.1
OBJECT IDENTIFIER    

vnetEtsiQsigGroupCA 1.3.6.1.4.1.562.36.2.2.110.1.1
OBJECT IDENTIFIER    

vnetEtsiQsigGroupCA02 1.3.6.1.4.1.562.36.2.2.110.1.1.3
OBJECT IDENTIFIER    

vnetEtsiQsigGroupCA02A 1.3.6.1.4.1.562.36.2.2.110.1.1.3.2
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilities 1.3.6.1.4.1.562.36.2.2.110.3
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.110.3.1
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.110.3.1.3
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.110.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscSigChanEQsigRowStatusEntry  
SEQUENCE    
  RowStatus as mscSigChanEQsigRowStatus  
  DisplayString as mscSigChanEQsigComponentName  
  StorageType as mscSigChanEQsigStorageType  
  NonReplicated as mscSigChanEQsigIndex  

MscSigChanEQsigL2Entry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigT23  
  Unsigned32 as mscSigChanEQsigT200  
  Unsigned32 as mscSigChanEQsigN200  
  Unsigned32 as mscSigChanEQsigT203  
  Unsigned32 as mscSigChanEQsigCircuitSwitchedK  

MscSigChanEQsigL3Entry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigT309  
  Unsigned32 as mscSigChanEQsigT310  

MscSigChanEQsigProvEntry  
SEQUENCE    
  INTEGER as mscSigChanEQsigSide  
  Unsigned32 as mscSigChanEQsigMaxNonCallConcurrent  
  INTEGER as mscSigChanEQsigOverlapSendingEnabled  
  INTEGER as mscSigChanEQsigOverlapReceivingEnabled  

MscSigChanEQsigStateEntry  
SEQUENCE    
  INTEGER as mscSigChanEQsigAdminState  
  INTEGER as mscSigChanEQsigOperationalState  
  INTEGER as mscSigChanEQsigUsageState  

MscSigChanEQsigStatsEntry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigTotalCallsToIf  
  Unsigned32 as mscSigChanEQsigTotalCallsFromIf  
  Unsigned32 as mscSigChanEQsigNonCallAssocSessionsToIf  
  Unsigned32 as mscSigChanEQsigNonCallAssocSessionsFromIf  

MscSigChanEQsigOperEntry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigActiveChannels  
  Unsigned32 as mscSigChanEQsigActiveVoiceChannels  
  Unsigned32 as mscSigChanEQsigActiveDataChannels  
  Unsigned32 as mscSigChanEQsigPeakActiveChannels  
  Unsigned32 as mscSigChanEQsigPeakActiveVoiceChannels  
  Unsigned32 as mscSigChanEQsigPeakActiveDataChannels  
  INTEGER as mscSigChanEQsigDChanStatus  

MscSigChanEQsigToolsEntry  
SEQUENCE    
  OCTET STRING as mscSigChanEQsigTracing  

MscSigChanEQsigEQsigSpecificProvEntry  
SEQUENCE    
  INTEGER as mscSigChanEQsigMsgSegmentation  
  INTEGER as mscSigChanEQsigE1ChannelNumbers  

MscSigChanEQsigEQsigSpecificOpEntry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigSegmentationAccepted  
  Unsigned32 as mscSigChanEQsigSegmentationFailed  

MscSigChanEQsigFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscSigChanEQsigFramerRowStatus  
  DisplayString as mscSigChanEQsigFramerComponentName  
  StorageType as mscSigChanEQsigFramerStorageType  
  NonReplicated as mscSigChanEQsigFramerIndex  

MscSigChanEQsigFramerProvEntry  
SEQUENCE    
  Link as mscSigChanEQsigFramerInterfaceName  

MscSigChanEQsigFramerStateEntry  
SEQUENCE    
  INTEGER as mscSigChanEQsigFramerAdminState  
  INTEGER as mscSigChanEQsigFramerOperationalState  
  INTEGER as mscSigChanEQsigFramerUsageState  

MscSigChanEQsigFramerStatsEntry  
SEQUENCE    
  Unsigned32 as mscSigChanEQsigFramerFrmToIf  
  Unsigned32 as mscSigChanEQsigFramerFrmFromIf  
  Unsigned32 as mscSigChanEQsigFramerOctetFromIf  
  Unsigned32 as mscSigChanEQsigFramerAborts  
  Unsigned32 as mscSigChanEQsigFramerCrcErrors  
  Unsigned32 as mscSigChanEQsigFramerLrcErrors  
  Unsigned32 as mscSigChanEQsigFramerNonOctetErrors  
  Unsigned32 as mscSigChanEQsigFramerOverruns  
  Unsigned32 as mscSigChanEQsigFramerUnderruns  
  Unsigned32 as mscSigChanEQsigFramerLargeFrmErrors