Olicom-crossfireAtmSwitch-MIB

File: Olicom-crossfireAtmSwitch-MIB.mib (296991 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB
RFC1231-MIB RFC-1212 Olicom-MIB

Imported symbols

TRAP-TYPE enterprises Counter
TimeTicks Gauge IpAddress
DisplayString ifIndex MacAddress
OBJECT-TYPE ocmibsCrossfireAtmMIB controlTime

Defined Objects

olicom 1.3.6.1.4.1.285
OBJECT IDENTIFIER    

ocmibs 1.3.6.1.4.1.285.2
OBJECT IDENTIFIER    

ocmibsCrossfireAtmMIB 1.3.6.1.4.1.285.2.6
OBJECT IDENTIFIER    

crossfireAtmInfo 1.3.6.1.4.1.285.2.6.1
OBJECT IDENTIFIER    

restart 1.3.6.1.4.1.285.2.6.1
The switch has restarted.
TRAP-TYPE    
  termRestartInfoRestartTime  
  termRestartInfoRestartReason  
  termRestartInfoTerminationReason  
  termRestartInfoBbsram  

infoProcessorModule 1.3.6.1.4.1.285.2.6.1.1
OBJECT IDENTIFIER    

infoProcessorModuleHwProductId 1.3.6.1.4.1.285.2.6.1.1.1
The processor module product ID from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoProcessorModuleHwVersion 1.3.6.1.4.1.285.2.6.1.1.2
The processor module version from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoProcessorModuleHwEcoLevel 1.3.6.1.4.1.285.2.6.1.1.3
The processor module ECO level - not used.
OBJECT-TYPE    
  DisplayString  

infoProcessorModuleHwSerialNumber 1.3.6.1.4.1.285.2.6.1.1.4
The processor module serial number from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoProcessorModuleHwOptionTable 1.3.6.1.4.1.285.2.6.1.1.5
The table of processor module options as found in the EEPROM.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoProcessorModuleHwOptionEntry

infoProcessorModuleHwOptionEntry 1.3.6.1.4.1.285.2.6.1.1.5.1
Each row in this table describes one processor module option.
OBJECT-TYPE    
  InfoProcessorModuleHwOptionEntry  

infoProcessorModuleHwOptionNo 1.3.6.1.4.1.285.2.6.1.1.5.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

infoProcessorModuleHwOption 1.3.6.1.4.1.285.2.6.1.1.5.1.2
A processor module option string from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoFeatureModule 1.3.6.1.4.1.285.2.6.1.2
OBJECT IDENTIFIER    

infoFeatureModuleHwProductId 1.3.6.1.4.1.285.2.6.1.2.1
The feature module product ID from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoFeatureModuleHwVersion 1.3.6.1.4.1.285.2.6.1.2.2
The feature module version from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoFeatureModuleHwEcoLevel 1.3.6.1.4.1.285.2.6.1.2.3
The feature module ECO level - not used.
OBJECT-TYPE    
  DisplayString  

infoFeatureModuleHwSerialNumber 1.3.6.1.4.1.285.2.6.1.2.4
The feature module serial number from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoFeatureModuleHwOptionTable 1.3.6.1.4.1.285.2.6.1.2.5
The table of feature module options as found in the EEPROM.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoFeatureModuleHwOptionEntry

infoFeatureModuleHwOptionEntry 1.3.6.1.4.1.285.2.6.1.2.5.1
Each row in this table describes one feature module option.
OBJECT-TYPE    
  InfoFeatureModuleHwOptionEntry  

infoFeatureModuleHwOptionNo 1.3.6.1.4.1.285.2.6.1.2.5.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

infoFeatureModuleHwOption 1.3.6.1.4.1.285.2.6.1.2.5.1.2
A feature module option string from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoXModule 1.3.6.1.4.1.285.2.6.1.3
OBJECT IDENTIFIER    

infoXModuleTable 1.3.6.1.4.1.285.2.6.1.3.1
This table contains information for each of the expansion modules installed in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoXModuleEntry

infoXModuleEntry 1.3.6.1.4.1.285.2.6.1.3.1.1
Each row in this table contains information for one expansion module.
OBJECT-TYPE    
  InfoXModuleEntry  

infoXModuleSlotIndex 1.3.6.1.4.1.285.2.6.1.3.1.1.1
The slot number for the expansion module. It is used to index the expansion module in the table.
OBJECT-TYPE    
  INTEGER 1..8  

infoXModuleHwProductId 1.3.6.1.4.1.285.2.6.1.3.1.1.2
The expansion module product ID from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoXModuleHwVersion 1.3.6.1.4.1.285.2.6.1.3.1.1.3
The expansion module version from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoXModuleHwEcoLevel 1.3.6.1.4.1.285.2.6.1.3.1.1.4
The expansion module ECO level - not used.
OBJECT-TYPE    
  DisplayString  

infoXModuleHwSerialNumber 1.3.6.1.4.1.285.2.6.1.3.1.1.5
The expansion module serial number from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoXModuleHwOptionTable 1.3.6.1.4.1.285.2.6.1.3.2
The table of expansion module options as found in the EEPROM. There is one row in the table for each expansion module and each option.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoXModuleHwOptionEntry

infoXModuleHwOptionEntry 1.3.6.1.4.1.285.2.6.1.3.2.1
Each row in this table describes one expansion module option.
OBJECT-TYPE    
  InfoXModuleHwOptionEntry  

infoXModuleHwOptionSlotIndex 1.3.6.1.4.1.285.2.6.1.3.2.1.1
The slot number for the expansion module. It is used to index the expansion module in the table.
OBJECT-TYPE    
  INTEGER  

infoXModuleHwOptionNo 1.3.6.1.4.1.285.2.6.1.3.2.1.2
An arbitrary integer used to differentiate multiple rows for the same expansion module.
OBJECT-TYPE    
  INTEGER  

infoXModuleHwOption 1.3.6.1.4.1.285.2.6.1.3.2.1.3
An expansion module option string from the EEPROM.
OBJECT-TYPE    
  DisplayString  

infoIfIndex 1.3.6.1.4.1.285.2.6.1.4
OBJECT IDENTIFIER    

infoIfIndexLan 1.3.6.1.4.1.285.2.6.1.4.1
This ifIndex value designates the Ethernet LAN interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexSlip 1.3.6.1.4.1.285.2.6.1.4.2
This ifIndex value designates the SLIP interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexElan 1.3.6.1.4.1.285.2.6.1.4.3
This ifIndex value designates the emulated LAN user side virtual interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexClassicalIp 1.3.6.1.4.1.285.2.6.1.4.4
This ifIndex value designates the Classical IP virtual interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexRfc1483Bridged 1.3.6.1.4.1.285.2.6.1.4.5
This ifIndex value designates the Classical IP (RFC 1483 bridged encapsulation) virtual interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexRfc1483Routed 1.3.6.1.4.1.285.2.6.1.4.6
This ifIndex value designates the Classical IP (RFC 1483 routed encapsulation) virtual interface on the switch.
OBJECT-TYPE    
  INTEGER  

infoIfIndexAtmNode 1.3.6.1.4.1.285.2.6.1.4.7
This ifIndex value designates the network node side virtual interface on the switch which is used when the switch communicates with itself.
OBJECT-TYPE    
  INTEGER  

termRestartInfo 1.3.6.1.4.1.285.2.6.1.5
OBJECT IDENTIFIER    

termRestartInfoRestartTime 1.3.6.1.4.1.285.2.6.1.5.1
Time when the system was restarted (measured in seconds since 00:00:00 UTC on 1 January 1970).
OBJECT-TYPE    
  INTEGER  

termRestartInfoSwSection1StatusWord 1.3.6.1.4.1.285.2.6.1.5.2
The value of the status word in the first section of the software image flash memory.
OBJECT-TYPE    
  INTEGER  

termRestartInfoSwSection2StatusWord 1.3.6.1.4.1.285.2.6.1.5.3
The value of the status word in the second section of the software image flash memory.
OBJECT-TYPE    
  INTEGER  

termRestartInfoSwImageLoaded 1.3.6.1.4.1.285.2.6.1.5.4
The number of the software image currently running.
OBJECT-TYPE    
  INTEGER image1(1), image2(2)  

termRestartInfoFutureTestMode 1.3.6.1.4.1.285.2.6.1.5.5
Indicates if the software is running in 'Future Test' mode, i.e. if this is a one-shot test of a software image.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

termRestartInfoBootpExecuted 1.3.6.1.4.1.285.2.6.1.5.6
Indicates if BOOTP was executed to load the software image.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

termRestartInfoReloadTime 1.3.6.1.4.1.285.2.6.1.5.7
Time when the software was stored in the switch (measured in seconds since 00:00:00 UTC on 1 January 1970).
OBJECT-TYPE    
  INTEGER  

termRestartInfoBootpReason 1.3.6.1.4.1.285.2.6.1.5.8
The reason that BOOTP was executed to load the software. The possible values are: noSw There was no executable software image in the switch. chksumError The software image in the switch had a check sum error. invalidSwStatus The status word associated with the software image in the switch was invalid. pushButtons The 'default' and 'reset' buttons on the switch font panel were pressed. undefined Other reasons.
OBJECT-TYPE    
  INTEGER noSw(1), chksumError(2), invalidSwStatus(3), pushButtons(4), undefined(5)  

termRestartInfoServerIpAddress 1.3.6.1.4.1.285.2.6.1.5.9
The IP address of the server that provided the software image during the BOOTP operation.
OBJECT-TYPE    
  IpAddress  

termRestartInfoServerMacAddress 1.3.6.1.4.1.285.2.6.1.5.10
The MAC address of the of the server that provided the software image during the BOOTP operation.
OBJECT-TYPE    
  MacAddress  

termRestartInfoFileName 1.3.6.1.4.1.285.2.6.1.5.11
The name of the software image file on the BOOTP server.
OBJECT-TYPE    
  DisplayString  

termRestartInfoBbsramTerminationTimestamp 1.3.6.1.4.1.285.2.6.1.5.12
Time when the system last closed down (measured in seconds since 00:00:00 UTC on 1 January 1970).
OBJECT-TYPE    
  INTEGER  

termRestartInfoTerminationReason 1.3.6.1.4.1.285.2.6.1.5.13
The reason the system last closed down. Possible values are: unknown Unknown reason. controlled Management requested termination. controlledHalt The switch was halted, possibly because of an inconsistent configuration. fatal A fatal error was encountered in the software. watchdog The software watchdog timed out. temperatureAlarm The temperature within the switch reached a value above temperatureCriticalTrapThreshold. psuFailure Power supply failure. featureModuleRemoved The feature module was removed while the switch was operating.
OBJECT-TYPE    
  INTEGER unknown(1), controlled(2), controlledHalt(3), fatal(4), watchdog(5), temperatureAlarm(6), psuFailure(7), featureModuleRemoved(8)  

termRestartInfoRestartReason 1.3.6.1.4.1.285.2.6.1.5.14
The reason the system started. Possible values are: reset The 'reset' button on the switch font panel was pressed. default The 'default' button on the switch front panel was pressed. resetDefault The 'reset' and 'default' buttons on the switch front panel were pressed. watchdog The software watchdog timed out. fatal A fatal error was encountered in the software. controlled Management requested restart. coldStart Power up. unknown Unknown reason. featureModuleRemoved The feature module was removed while the switch was operating.
OBJECT-TYPE    
  INTEGER reset(1), default(2), resetDefault(3), watchdog(4), fatal(5), controlled(6), coldStart(7), unknown(8), featureModuleRemoved(9)  

termRestartInfoHwReconfigState 1.3.6.1.4.1.285.2.6.1.5.15
The reconfiguration state of the switch. Possible values are: totalReconfig The stored configuration is invalidated because of hardware changes. partialReconfig The stored expansion module configuration does not match the physically installed expansion modules. Some configuration is invalidated. noReconfig The stored configuration is used unchanged.
OBJECT-TYPE    
  INTEGER totalReconfig(1), partialReconfig(2), noReconfig(3)  

termRestartInfoBbsram 1.3.6.1.4.1.285.2.6.1.5.16
Data stored in battery backed-up RAM when the switch terminated.
OBJECT-TYPE    
  OCTET STRING SIZE(50)  

crossfireAtmConfiguration 1.3.6.1.4.1.285.2.6.2
OBJECT IDENTIFIER    

configAddressing 1.3.6.1.4.1.285.2.6.2.1
OBJECT IDENTIFIER    

configSwitchAddrPrefixType 1.3.6.1.4.1.285.2.6.2.1.1
The ATM address prefix type.
OBJECT-TYPE    
  INTEGER dcc(57), iso(69), icd(71)  

configSwitchAddrPrefixSize 1.3.6.1.4.1.285.2.6.2.1.2
The number of octets in configSwitchAddrAtmPrefix.
OBJECT-TYPE    
  INTEGER 1..12  

configSwitchAddrAtmPrefix 1.3.6.1.4.1.285.2.6.2.1.3
The next octets of the ATM address.
OBJECT-TYPE    
  OCTET STRING SIZE(12)  

configSwitchAddrAtmAddress 1.3.6.1.4.1.285.2.6.2.1.4
The complete ATM address (with a 0 in the final octet, i.e. the selector).
OBJECT-TYPE    
  AtmAddress  

configClocking 1.3.6.1.4.1.285.2.6.2.2
OBJECT IDENTIFIER    

configNetworkClockSource 1.3.6.1.4.1.285.2.6.2.2.1
Controls whether the internal clock is the master clock or an incoming network clock is redistributed to all other ports.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

configNetworkClockEPortIndex 1.3.6.1.4.1.285.2.6.2.2.2
The ePort that is the clock source if configNetworkClockSource has the value 'external'.
OBJECT-TYPE    
  INTEGER  

configLane 1.3.6.1.4.1.285.2.6.2.3
OBJECT IDENTIFIER    

configLaneControlAdminStatus 1.3.6.1.4.1.285.2.6.2.3.1
Enable or disable LAN emulation services.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configLaneControlLecsAdminStatus 1.3.6.1.4.1.285.2.6.2.3.2
Enable or disable the LAN Emulation Configuration Server (LECS).
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configLaneControlLesBusAdminStatus 1.3.6.1.4.1.285.2.6.2.3.3
Enable or disable the LAN Emulation Server (LES) and Broadcast and Unknown Server (BUS).
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configMonitoring 1.3.6.1.4.1.285.2.6.2.4
OBJECT IDENTIFIER    

configMonitorEPortAdminStatus 1.3.6.1.4.1.285.2.6.2.4.1
Enable or disable copying of cells to the last iPort.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configMonitorEPortIPortSlotIndex 1.3.6.1.4.1.285.2.6.2.4.2
The number of the expansion module containing the iPort whose inbound or outbound cells are to be copied.
OBJECT-TYPE    
  INTEGER 1..8  

configMonitorEPortIPortRIndex 1.3.6.1.4.1.285.2.6.2.4.3
The number of the iPort whose inbound or outbound cells are to be copied.
OBJECT-TYPE    
  INTEGER 1..2  

configMonitorEPortDirection 1.3.6.1.4.1.285.2.6.2.4.4
Controls if the inbound (rx) or outbound (tx) cells are to be copied.
OBJECT-TYPE    
  INTEGER rx(1), tx(2)  

configTm 1.3.6.1.4.1.285.2.6.2.6
OBJECT IDENTIFIER    

configTmControlMode 1.3.6.1.4.1.285.2.6.2.6.1
Controls whether ABR traffic should be controlled through EFCI (Explicit Forward Congestion Indication), ER (Explicit Rate) or no mechanism at all.
OBJECT-TYPE    
  INTEGER efci(1), er(2), none(3)  

configTmControlEarlyPacketDiscardAdminStatus 1.3.6.1.4.1.285.2.6.2.6.2
Enables or disables early packed discard.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configTmControlVbrTrafficAllocation 1.3.6.1.4.1.285.2.6.2.6.3
Indicates if bandwidth allocation of VBR connections should be based on the peak cell rate (strictAllocation) or a calculation of equivalent bandwidth (overSubscribe).
OBJECT-TYPE    
  INTEGER strictAllocation(1), overSubscribe(2)  

configTmControlErTuningAlpha 1.3.6.1.4.1.285.2.6.2.6.4
100 times the value of the alpha parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningBeta 1.3.6.1.4.1.285.2.6.2.6.5
The value of the beta parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningGamma 1.3.6.1.4.1.285.2.6.2.6.6
The value of the gamma parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningDelta 1.3.6.1.4.1.285.2.6.2.6.7
100 times the value of the delta parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningLambda 1.3.6.1.4.1.285.2.6.2.6.8
The value of the lambda parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningTau 1.3.6.1.4.1.285.2.6.2.6.9
The value (in microseconds) of the tau parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningPhi 1.3.6.1.4.1.285.2.6.2.6.10
100 times the value of the phi parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmControlErTuningPsi 1.3.6.1.4.1.285.2.6.2.6.11
The value of the psi parameter in the explicit rate algorithm.
OBJECT-TYPE    
  INTEGER  

configTmServiceClassMapTable 1.3.6.1.4.1.285.2.6.2.6.12
This table maps each traffic category to one of the four scheduling queues that are associated with each iPort in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigTmServiceClassMapEntry

configTmServiceClassMapEntry 1.3.6.1.4.1.285.2.6.2.6.12.1
Each row in this table describes one service category.
OBJECT-TYPE    
  ConfigTmServiceClassMapEntry  

configTmServiceClassMapServiceClass 1.3.6.1.4.1.285.2.6.2.6.12.1.1
The service category described by this row.
OBJECT-TYPE    
  INTEGER other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)  

configTmServiceClassMapSchedulingQueue 1.3.6.1.4.1.285.2.6.2.6.12.1.2
The cell scheduling queue used by this service category.
OBJECT-TYPE    
  INTEGER 1..4  

configTrafficDescr 1.3.6.1.4.1.285.2.6.2.7
OBJECT IDENTIFIER    

trafficDescriptorTableNextIndex 1.3.6.1.4.1.285.2.6.2.7.1
The next unused row in trafficDescriptorTable.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorTable 1.3.6.1.4.1.285.2.6.2.7.2
This table contains all the traffic descriptors in the switch. Each traffic descriptor may be associated with zero or more connections passing through the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    TrafficDescriptorEntry

trafficDescriptorEntry 1.3.6.1.4.1.285.2.6.2.7.2.1
Each row in this table describes one traffic descriptor.
OBJECT-TYPE    
  TrafficDescriptorEntry  

trafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.7.2.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorCreationMode 1.3.6.1.4.1.285.2.6.2.7.2.1.2
The reason this traffic descriptor was created. Possible values are: switchedConnection The traffic descriptor was created because signalling established a connection through the switch. management The traffic descriptor was created through management. default The traffic descriptor is one of the default descriptors present in the switch.
OBJECT-TYPE    
  INTEGER switchedConnection(1), management(2), default(3)  

trafficDescriptorServiceClass 1.3.6.1.4.1.285.2.6.2.7.2.1.3
The service category for this traffic descriptor.
OBJECT-TYPE    
  INTEGER other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)  

trafficDescriptorPcr01 1.3.6.1.4.1.285.2.6.2.7.2.1.4
The Peak Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorPcr0 1.3.6.1.4.1.285.2.6.2.7.2.1.5
The Peak Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorScr01 1.3.6.1.4.1.285.2.6.2.7.2.1.6
The Sustainable Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorScr0 1.3.6.1.4.1.285.2.6.2.7.2.1.7
The Sustainable Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorMbs01 1.3.6.1.4.1.285.2.6.2.7.2.1.8
The Maximum Burst Size for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorMbs0 1.3.6.1.4.1.285.2.6.2.7.2.1.9
The Maximum Burst Size for the CLP0 flow. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorTaggingFlag 1.3.6.1.4.1.285.2.6.2.7.2.1.10
Indicates if tagging is disabled or enabled.
OBJECT-TYPE    
  INTEGER noTagging(1), tagging(2)  

trafficDescriptorFrameDiscardFlag 1.3.6.1.4.1.285.2.6.2.7.2.1.11
Indicates if frame discard is enabled or disabled. This only has any effect if configTmControlEarlyPacketDiscardAdminStatus is up.
OBJECT-TYPE    
  INTEGER noDiscard(1), discard(2)  

trafficDescriptorBestEffortFlag 1.3.6.1.4.1.285.2.6.2.7.2.1.12
Indicates that best-effort delivery should be used (i.e. UBR service).
OBJECT-TYPE    
  INTEGER noBestEffort(1), bestEffort(2)  

trafficDescriptorMcr 1.3.6.1.4.1.285.2.6.2.7.2.1.13
The Minimum Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorAbrIcr 1.3.6.1.4.1.285.2.6.2.7.2.1.14
The Initial Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorAbrTbe 1.3.6.1.4.1.285.2.6.2.7.2.1.15
The Transient Buffer Exposure. The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorAbrFrtt 1.3.6.1.4.1.285.2.6.2.7.2.1.16
The Fixed Round Trip time (in microseconds). The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorAbrRif 1.3.6.1.4.1.285.2.6.2.7.2.1.17
The Rate Increase Factor. A value such as, for example, rifOneOver128 indicates a RIF value of 1/128.
OBJECT-TYPE    
  INTEGER rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)  

trafficDescriptorAbrRdf 1.3.6.1.4.1.285.2.6.2.7.2.1.18
The Rate Decrease Factor. A value such as, for example, rdfOneOver128 indicates a RIF value of 1/128.
OBJECT-TYPE    
  INTEGER rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)  

trafficDescriptorAbrNrm 1.3.6.1.4.1.285.2.6.2.7.2.1.19
The number of cells between each Resource Management (RM) cell. A value such as, for example, nrm32 indicates an Nrm value of 32.
OBJECT-TYPE    
  INTEGER nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)  

trafficDescriptorAbrTrm 1.3.6.1.4.1.285.2.6.2.7.2.1.20
The maximum time between each Resource Management (RM) cell. A value such as, for example, trm3Point125 indicates a Trm value of 3.125 milliseconds.
OBJECT-TYPE    
  INTEGER trm0Point78125(1), trm1Point5625(2), trm3Point125(3), trm6Point25(4), trm12Point5(5), trm25(6), trm50(7), trm100(8)  

trafficDescriptorAbrCdf 1.3.6.1.4.1.285.2.6.2.7.2.1.21
The Cutoff Decrease Factor. A value such as, for example, cdfOneOver16 indicates a CDF value of 1/16.
OBJECT-TYPE    
  INTEGER cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)  

trafficDescriptorAbrAdtf 1.3.6.1.4.1.285.2.6.2.7.2.1.22
The value (in centiseconds) of the ACR Decrease Time Factor.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorTrafficType 1.3.6.1.4.1.285.2.6.2.7.2.1.23
The traffic descriptor type. This value is identical to the last component of the object ID of the MIB objects in the atmfTrafficDescrTypes subtree of the ILMI MIB.
OBJECT-TYPE    
  INTEGER 1..9  

trafficDescriptorRowStatus 1.3.6.1.4.1.285.2.6.2.7.2.1.24
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

trafficDescriptorCtd 1.3.6.1.4.1.285.2.6.2.7.2.1.25
The Cell Transfer Delay (in microseconds). The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorCdv 1.3.6.1.4.1.285.2.6.2.7.2.1.26
The Cell Delay Variation (in microseconds). The value -1 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

trafficDescriptorLogClr 1.3.6.1.4.1.285.2.6.2.7.2.1.27
Minus the base 10 logarithm of the Cell Loss Ratio. The value 0 is used to indicate that this value is not used.
OBJECT-TYPE    
  INTEGER  

configServiceReg 1.3.6.1.4.1.285.2.6.2.8
OBJECT IDENTIFIER    

configIlmiServiceRegistryTable 1.3.6.1.4.1.285.2.6.2.8.1
This table is used to configure the contents of the ILMI service registry on all ATM ports.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigIlmiServiceRegistryEntry

configIlmiServiceRegistryEntry 1.3.6.1.4.1.285.2.6.2.8.1.1
Each row in this table describes one service provided by one service provider.
OBJECT-TYPE    
  ConfigIlmiServiceRegistryEntry  

configIlmiServiceRegistryAddressIndex 1.3.6.1.4.1.285.2.6.2.8.1.1.1
An arbitrary integer used to differentiate multiple rows containing different ATM addresses for the same service.
OBJECT-TYPE    
  INTEGER  

configIlmiServiceRegistryServiceId 1.3.6.1.4.1.285.2.6.2.8.1.1.2
The service identifier which uniquely identifies the type of service at the address provided in the table. Legal values are given in the Service Registry MIB in the ILMI specification.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

configIlmiServiceRegistryAtmAddress 1.3.6.1.4.1.285.2.6.2.8.1.1.3
The full ATM address of the service. The user-side IME may use this address to establish a connection with the service.
OBJECT-TYPE    
  AtmAddress  

configIlmiServiceRegistryParm1 1.3.6.1.4.1.285.2.6.2.8.1.1.4
An octet string whose size and meaning is determined by the value of configIlmiServiceRegistryServiceId.
OBJECT-TYPE    
  OCTET STRING SIZE(1..255)  

configIlmiServiceRegistryRowStatus 1.3.6.1.4.1.285.2.6.2.8.1.1.5
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

configSar 1.3.6.1.4.1.285.2.6.2.9
OBJECT IDENTIFIER    

configSarMuxFillThreshold 1.3.6.1.4.1.285.2.6.2.9.1
The number of cells in the SAR multiplexer FIFO that will cause the PHY to take priority over the SAR.
OBJECT-TYPE    
  INTEGER 1..63  

configSarMuxSarVpi 1.3.6.1.4.1.285.2.6.2.9.2
The VPI used to distinguish cells on iPort 0 that are intended for the SAR.
OBJECT-TYPE    
  INTEGER 1..255  

configSarEmptyCellHandling 1.3.6.1.4.1.285.2.6.2.9.3
OBJECT-TYPE    
  INTEGER idle(1), unassigned(2)  

configXModule 1.3.6.1.4.1.285.2.6.2.10
OBJECT IDENTIFIER    

configXModuleTable 1.3.6.1.4.1.285.2.6.2.10.1
This table contains configuration information for the expansion modules.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigXModuleEntry

configXModuleEntry 1.3.6.1.4.1.285.2.6.2.10.1.1
Each row in this table contains information about one expansion module.
OBJECT-TYPE    
  ConfigXModuleEntry  

configXModuleSlotIndex 1.3.6.1.4.1.285.2.6.2.10.1.1.1
The slot number for the expansion module. It is used to index the expansion module in the table.
OBJECT-TYPE    
  INTEGER 1..8  

configXModuleAdminStatus 1.3.6.1.4.1.285.2.6.2.10.1.1.2
Enables, disables, or resets the expansion module.
OBJECT-TYPE    
  INTEGER up(1), down(2), reset(3)  

configFeatureModule 1.3.6.1.4.1.285.2.6.2.11
OBJECT IDENTIFIER    

configFeatureModuleAdminStatus 1.3.6.1.4.1.285.2.6.2.11.1
Enables or disables the feature module.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configCommonEPort 1.3.6.1.4.1.285.2.6.2.12
OBJECT IDENTIFIER    

configCommonEPortIlmiAdminStatus 1.3.6.1.4.1.285.2.6.2.12.1
Enables or disables ILMI on an ATM port.
OBJECT-TYPE    
  INTEGER full(1), off(3)  

configCommonEPortAddrRegistrationAdminStatus 1.3.6.1.4.1.285.2.6.2.12.2
Enables or disables the address registration protocol on an ATM port.
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

configCommonEPortMaxVpcs 1.3.6.1.4.1.285.2.6.2.12.3
The maximum number of VPCs on an ATM port.
OBJECT-TYPE    
  INTEGER 0..255  

configCommonEPortMaxVccs 1.3.6.1.4.1.285.2.6.2.12.4
The maximum number of VCCs on an ATM port.
OBJECT-TYPE    
  INTEGER 0..32767  

configCommonEPortMaxVpiBits 1.3.6.1.4.1.285.2.6.2.12.5
The number of bits used in a VPI on an ATM port.
OBJECT-TYPE    
  INTEGER 0..8  

configCommonEPortMaxVciBits 1.3.6.1.4.1.285.2.6.2.12.6
The number of bits used in a VCI on an ATM port.
OBJECT-TYPE    
  INTEGER 0..14  

configCommonEPortUniType 1.3.6.1.4.1.285.2.6.2.12.7
The UNI type on an ATM port.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

configCommonEPortUniVersion 1.3.6.1.4.1.285.2.6.2.12.8
The highest UNI version used on an ATM port.
OBJECT-TYPE    
  INTEGER version3point0(2), version3point1(3), version4point0(4)  

configCommonEPortDeviceType 1.3.6.1.4.1.285.2.6.2.12.9
The ATM port device type.
OBJECT-TYPE    
  INTEGER user(1), node(2)  

configCommonEPortIlmiVersion 1.3.6.1.4.1.285.2.6.2.12.10
The highest ILMI version used on an ATM port.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

configCommonEPortNniSigVersion 1.3.6.1.4.1.285.2.6.2.12.11
The NNI signalling protocol used on an ATM port.
OBJECT-TYPE    
  INTEGER unsupported(1), iisp(2), pnniVersion1point0(3)  

configCommonEPortSignallingVpi 1.3.6.1.4.1.285.2.6.2.12.12
The VPI used for signalling.
OBJECT-TYPE    
  INTEGER 0..255  

configCommonEPortSignallingVci 1.3.6.1.4.1.285.2.6.2.12.13
The VCI used for signalling.
OBJECT-TYPE    
  INTEGER 0..16383  

configCommonEPortIlmiVpi 1.3.6.1.4.1.285.2.6.2.12.14
The VPI used for ILMI.
OBJECT-TYPE    
  INTEGER 0..255  

configCommonEPortIlmiVci 1.3.6.1.4.1.285.2.6.2.12.15
The VCI used for ILMI.
OBJECT-TYPE    
  INTEGER 0..16383  

configCommonEPortLecsVpi 1.3.6.1.4.1.285.2.6.2.12.16
The VPI used for LECS.
OBJECT-TYPE    
  INTEGER 0..255  

configCommonEPortLecsVci 1.3.6.1.4.1.285.2.6.2.12.17
The VCI used for LECS.
OBJECT-TYPE    
  INTEGER 0..16383  

configCommonEPortPnniVpi 1.3.6.1.4.1.285.2.6.2.12.18
The VPI used for PNNI.
OBJECT-TYPE    
  INTEGER 0..255  

configCommonEPortPnniVci 1.3.6.1.4.1.285.2.6.2.12.19
The VCI used for PNNI.
OBJECT-TYPE    
  INTEGER 0..16383  

configCommonEPortAbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.12.20
The maximum percentage of the ATM link bandwidth that may be used for ABR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configCommonEPortVbrRtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.12.21
The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configCommonEPortVbrNrtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.12.22
The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configCommonEPortCbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.12.23
The maximum percentage of the ATM link bandwidth that may be used for CBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configStaticEPortIlmiPollFrequency 1.3.6.1.4.1.285.2.6.2.12.24
Polling frequency in seconds for maintaining ILMI connectivity.
OBJECT-TYPE    
  INTEGER 1..20  

configStaticEPortIlmiPollRetries 1.3.6.1.4.1.285.2.6.2.12.25
The number of retries before declaring a loss of ILMI connectivity.
OBJECT-TYPE    
  INTEGER 1..10  

configStaticEPortMaxTransientPhyFailureTime 1.3.6.1.4.1.285.2.6.2.12.26
The maximum time in seconds where loss of signal or lack of rx sync is not considered a loss of PHY connectivity. A value of 0 indicates that failures will never be considered transient.
OBJECT-TYPE    
  INTEGER 0..10  

configStaticEPortMaxPhyFailuresPerMinute 1.3.6.1.4.1.285.2.6.2.12.27
The maximum number of transient or non-transient PHY failures per minute before an ATM port is automatically disabled and an ePortAutoDisabled trap is generated.
OBJECT-TYPE    
  INTEGER 1..10  

configCommonEPortLinkDelay 1.3.6.1.4.1.285.2.6.2.12.28
The expected transmission delay on the ATM link (in microseconds).
OBJECT-TYPE    
  INTEGER  

configCommonEPortTransientPhyOffTime 1.3.6.1.4.1.285.2.6.2.12.29
The time (in seconds) that the PHY may be disconnected during configCommonEPortTransientPhyWindowTime before an ePortAutoDisabled trap is sent.
OBJECT-TYPE    
  INTEGER  

configCommonEPortTransientPhyWindowTime 1.3.6.1.4.1.285.2.6.2.12.30
The duration (in seconds) of the window used for measuring PHY down time.
OBJECT-TYPE    
  INTEGER  

configCommonEPortTransientPhyDisconnectCount 1.3.6.1.4.1.285.2.6.2.12.31
Number of PHY disconnects that may occur during configCommonEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is sent.
OBJECT-TYPE    
  INTEGER 1..100  

configCommonEPortTransientPhyDisconnectTimer 1.3.6.1.4.1.285.2.6.2.12.32
The duration (in seconds) of the time used for counting PHY disconnects.
OBJECT-TYPE    
  INTEGER  

configCommonEPortDefaultSigVersion 1.3.6.1.4.1.285.2.6.2.12.33
The signalling version used if ILMI autoconfiguration is not possible.
OBJECT-TYPE    
  INTEGER uni(1), pnni(2), iispNetworkSide(3), iispUserSide(4)  

configCommonEPortMaxSvpcVpi 1.3.6.1.4.1.285.2.6.2.12.34
The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs.
OBJECT-TYPE    
  INTEGER 0..4096  

configCommonEPortMaxSvccVpi 1.3.6.1.4.1.285.2.6.2.12.35
The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs.
OBJECT-TYPE    
  INTEGER 0..4096  

configCommonEPortMinSvccVci 1.3.6.1.4.1.285.2.6.2.12.36
The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which the signalling stack is configured.
OBJECT-TYPE    
  INTEGER 0..65536  

configEPort 1.3.6.1.4.1.285.2.6.2.13
OBJECT IDENTIFIER    

configEPortScratchPadScratchPadStatus 1.3.6.1.4.1.285.2.6.2.13.1
Controls the copying of data between configEPortTable and the ePort scratch pad.
OBJECT-TYPE    
  INTEGER notReady(1), copy(2), copied(3), updateAndGo(4)  

configEPortScratchPadEPortIndex 1.3.6.1.4.1.285.2.6.2.13.2
Set to the row index in configEPortTable before the contents of the row are copied to the ePort scratch pad.
OBJECT-TYPE    
  INTEGER  

configEPortScratchPadIpAddress 1.3.6.1.4.1.285.2.6.2.13.3
The IP address of the manager that uses the ePort scratch pad. Used as a lock.
OBJECT-TYPE    
  IpAddress  

configEPortScratchPadActionStatus 1.3.6.1.4.1.285.2.6.2.13.4
The result of an attempt to copy between configEPortTable and the scratch pad.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), notPossible(3)  

configEPortScratchPadHwConfigTxClocking 1.3.6.1.4.1.285.2.6.2.13.5
A copy of configEPortHwConfigTxClocking.
OBJECT-TYPE    
  INTEGER network(1), local(2)  

configEPortScratchPadHwConfigSonetSdh 1.3.6.1.4.1.285.2.6.2.13.6
A copy of configEPortHwConfigSonetSdh.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2), none(3)  

configEPortScratchPadUseCommonEPortConfig 1.3.6.1.4.1.285.2.6.2.13.7
A copy of configEPortUseCommonEPortConfig.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

configEPortScratchPadLoopback 1.3.6.1.4.1.285.2.6.2.13.8
A copy of configEPortLoopback.
OBJECT-TYPE    
  INTEGER none(1), line(2), payload(3), diag(4), externalLine(5)  

configEPortScratchPadIlmiConfigIlmiAdminStatus 1.3.6.1.4.1.285.2.6.2.13.9
A copy of configEPortIlmiConfigIlmiAdminStatus.
OBJECT-TYPE    
  INTEGER full(1), off(3)  

configEPortScratchPadIlmiConfigAddrRegistrationAdminStatus 1.3.6.1.4.1.285.2.6.2.13.10
A copy of configEPortIlmiConfigAddrRegistrationAdminStatus.
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

configEPortScratchPadIlmiConfigMaxVpcs 1.3.6.1.4.1.285.2.6.2.13.11
A copy of configEPortIlmiConfigMaxVpcs.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortScratchPadIlmiConfigMaxVccs 1.3.6.1.4.1.285.2.6.2.13.12
A copy of configEPortIlmiConfigMaxVccs.
OBJECT-TYPE    
  INTEGER 0..32767  

configEPortScratchPadIlmiConfigMaxVpiBits 1.3.6.1.4.1.285.2.6.2.13.13
A copy of configEPortIlmiConfigMaxVpiBits.
OBJECT-TYPE    
  INTEGER 0..8  

configEPortScratchPadIlmiConfigMaxVciBits 1.3.6.1.4.1.285.2.6.2.13.14
A copy of configEPortIlmiConfigMaxVciBits.
OBJECT-TYPE    
  INTEGER 0..14  

configEPortScratchPadIlmiConfigUniType 1.3.6.1.4.1.285.2.6.2.13.15
A copy of configEPortIlmiConfigUniType.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

configEPortScratchPadIlmiConfigUniVersion 1.3.6.1.4.1.285.2.6.2.13.16
A copy of configEPortIlmiConfigUniVersion.
OBJECT-TYPE    
  INTEGER version3point0(2), version3point1(3), version4point0(4)  

configEPortScratchPadIlmiConfigDeviceType 1.3.6.1.4.1.285.2.6.2.13.17
A copy of configEPortIlmiConfigDeviceType.
OBJECT-TYPE    
  INTEGER user(1), node(2)  

configEPortScratchPadIlmiConfigIlmiVersion 1.3.6.1.4.1.285.2.6.2.13.18
A copy of configEPortIlmiConfigIlmiVersion.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

configEPortScratchPadIlmiConfigNniSigVersion 1.3.6.1.4.1.285.2.6.2.13.19
A copy of configEPortIlmiConfigNniSigVersion.
OBJECT-TYPE    
  INTEGER unsupported(1), iisp(2), pnniVersion1point0(3)  

configEPortScratchPadIlmiConfigSignallingVpi 1.3.6.1.4.1.285.2.6.2.13.20
A copy of configEPortIlmiConfigSignallingVpi.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortScratchPadIlmiConfigSignallingVci 1.3.6.1.4.1.285.2.6.2.13.21
A copy of configEPortIlmiConfigSignallingVci.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortScratchPadIlmiConfigIlmiVpi 1.3.6.1.4.1.285.2.6.2.13.22
A copy of configEPortIlmiConfigIlmiVpi.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortScratchPadIlmiConfigIlmiVci 1.3.6.1.4.1.285.2.6.2.13.23
A copy of configEPortIlmiConfigIlmiVci.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortScratchPadIlmiConfigLecsVpi 1.3.6.1.4.1.285.2.6.2.13.24
A copy of configEPortIlmiConfigLecsVpi.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortScratchPadIlmiConfigLecsVci 1.3.6.1.4.1.285.2.6.2.13.25
A copy of configEPortIlmiConfigLecsVci.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortScratchPadIlmiConfigPnniVpi 1.3.6.1.4.1.285.2.6.2.13.26
A copy of configEPortIlmiConfigPnniVpi.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortScratchPadIlmiConfigPnniVci 1.3.6.1.4.1.285.2.6.2.13.27
A copy of configEPortIlmiConfigPnniVci.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortScratchPadAbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.28
A copy of configEPortAbrBandwidthAllocation.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortScratchPadVbrRtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.29
A copy of configEPortVbrRtBandwidthAllocation.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortScratchPadVbrNrtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.30
A copy of configEPortVbrNrtBandwidthAllocation.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortScratchPadCbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.31
A copy of configEPortCbrBandwidthAllocation.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortScratchPadLinkDelay 1.3.6.1.4.1.285.2.6.2.13.32
A copy of configEPortLinkDelay.
OBJECT-TYPE    
  INTEGER  

configEPortScratchPadTransientPhyOffTime 1.3.6.1.4.1.285.2.6.2.13.33
A copy of configEPortTransientPhyOffTime.
OBJECT-TYPE    
  INTEGER  

configEPortScratchPadTransientPhyWindowTime 1.3.6.1.4.1.285.2.6.2.13.34
A copy of configEPortTransientPhyWindowTime.
OBJECT-TYPE    
  INTEGER  

configEPortScratchPadTransientPhyDisconnectCount 1.3.6.1.4.1.285.2.6.2.13.35
A copy of configEPortTransientPhyDisconnectCount.
OBJECT-TYPE    
  INTEGER 1..100  

configEPortScratchPadTransientPhyDisconnectTimer 1.3.6.1.4.1.285.2.6.2.13.36
A copy of configEPortTransientPhyDisconnectTimer.
OBJECT-TYPE    
  INTEGER  

configEPortScratchPadBandwidthLimit 1.3.6.1.4.1.285.2.6.2.13.37
A copy of configEPortBandwidthLimit.
OBJECT-TYPE    
  INTEGER  

configEPortTable 1.3.6.1.4.1.285.2.6.2.13.38
This table contains configuration for each ATM port (ePort) in the switch. The table may be modified through the ePort scratch pad.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigEPortEntry

configEPortEntry 1.3.6.1.4.1.285.2.6.2.13.38.1
Each row in this table describes one ATM port (ePort).
OBJECT-TYPE    
  ConfigEPortEntry  

configEPortIfIndex 1.3.6.1.4.1.285.2.6.2.13.38.1.1
The ifIndex of the ATM port described by this row.
OBJECT-TYPE    
  INTEGER  

configEPortHwConfigTxClocking 1.3.6.1.4.1.285.2.6.2.13.38.1.2
The clocking source for this ATM port. This setting is disregarded if this port is configured to receive the master clock from the network.
OBJECT-TYPE    
  INTEGER network(1), local(2)  

configEPortHwConfigSonetSdh 1.3.6.1.4.1.285.2.6.2.13.38.1.3
The cell framing used on this ATM port.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2), none(3)  

configEPortUseCommonEPortConfig 1.3.6.1.4.1.285.2.6.2.13.38.1.4
Indicates if this ATM port should use the common ePort configuration (found in the configCommonEPort MIB subtree) or its own configuration.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

configEPortLoopback 1.3.6.1.4.1.285.2.6.2.13.38.1.5
The hardware loopback type on this ATM port.
OBJECT-TYPE    
  INTEGER none(1), line(2), payload(3), diag(4), externalLine(5)  

configEPortIlmiConfigIlmiAdminStatus 1.3.6.1.4.1.285.2.6.2.13.38.1.6
Enables or disables ILMI on this ATM port.
OBJECT-TYPE    
  INTEGER full(1), off(3)  

configEPortIlmiConfigAddrRegistrationAdminStatus 1.3.6.1.4.1.285.2.6.2.13.38.1.7
Enables or disables the address registration protocol on this ATM port.
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

configEPortIlmiConfigMaxVpcs 1.3.6.1.4.1.285.2.6.2.13.38.1.8
The maximum number of VPCs on this ATM port.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortIlmiConfigMaxVccs 1.3.6.1.4.1.285.2.6.2.13.38.1.9
The maximum number of VCCs on this ATM port.
OBJECT-TYPE    
  INTEGER 0..32767  

configEPortIlmiConfigMaxVpiBits 1.3.6.1.4.1.285.2.6.2.13.38.1.10
The number of bits used in a VPI on this ATM port.
OBJECT-TYPE    
  INTEGER 0..8  

configEPortIlmiConfigMaxVciBits 1.3.6.1.4.1.285.2.6.2.13.38.1.11
The number of bits used in a VCI on this ATM port.
OBJECT-TYPE    
  INTEGER 0..14  

configEPortIlmiConfigUniType 1.3.6.1.4.1.285.2.6.2.13.38.1.12
The UNI type on this ATM port.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

configEPortIlmiConfigUniVersion 1.3.6.1.4.1.285.2.6.2.13.38.1.13
The highest UNI version used on this ATM port.
OBJECT-TYPE    
  INTEGER version3point0(2), version3point1(3), version4point0(4)  

configEPortIlmiConfigDeviceType 1.3.6.1.4.1.285.2.6.2.13.38.1.14
The ATM port device type.
OBJECT-TYPE    
  INTEGER user(1), node(2)  

configEPortIlmiConfigIlmiVersion 1.3.6.1.4.1.285.2.6.2.13.38.1.15
The highest ILMI version used on this ATM port.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

configEPortIlmiConfigNniSigVersion 1.3.6.1.4.1.285.2.6.2.13.38.1.16
The NNI signalling protocol used on this ATM port.
OBJECT-TYPE    
  INTEGER unsupported(1), iisp(2), pnniVersion1point0(3)  

configEPortIlmiConfigSignallingVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.17
The VPI used for signalling.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortIlmiConfigSignallingVci 1.3.6.1.4.1.285.2.6.2.13.38.1.18
The VCI used for signalling.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortIlmiConfigIlmiVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.19
The VPI used for ILMI.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortIlmiConfigIlmiVci 1.3.6.1.4.1.285.2.6.2.13.38.1.20
The VCI used for ILMI.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortIlmiConfigLecsVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.21
The VPI used for LECS.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortIlmiConfigLecsVci 1.3.6.1.4.1.285.2.6.2.13.38.1.22
The VCI used for LECS.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortIlmiConfigPnniVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.23
The VPI used for PNNI.
OBJECT-TYPE    
  INTEGER 0..255  

configEPortIlmiConfigPnniVci 1.3.6.1.4.1.285.2.6.2.13.38.1.24
The VCI used for PNNI.
OBJECT-TYPE    
  INTEGER 0..16383  

configEPortAbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.38.1.25
The maximum percentage of the ATM link bandwidth that may be used for ABR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortVbrRtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.38.1.26
The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortVbrNrtBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.38.1.27
The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortCbrBandwidthAllocation 1.3.6.1.4.1.285.2.6.2.13.38.1.28
The maximum percentage of the ATM link bandwidth that may be used for CBR traffic.
OBJECT-TYPE    
  INTEGER 0..100  

configEPortLinkDelay 1.3.6.1.4.1.285.2.6.2.13.38.1.29
The expected transmission delay on the ATM link (in microseconds).
OBJECT-TYPE    
  INTEGER  

configEPortTransientPhyOffTime 1.3.6.1.4.1.285.2.6.2.13.38.1.30
The time (in seconds) that the PHY may be disconnected during configEPortTransientPhyWindowTime before an ePortAutoDisabled trap is sent.
OBJECT-TYPE    
  INTEGER  

configEPortTransientPhyWindowTime 1.3.6.1.4.1.285.2.6.2.13.38.1.31
The duration (in seconds) of the window used for measuring PHY down time.
OBJECT-TYPE    
  INTEGER  

configEPortTransientPhyDisconnectCount 1.3.6.1.4.1.285.2.6.2.13.38.1.32
Number of PHY disconnects that may occur during configEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is sent.
OBJECT-TYPE    
  INTEGER 1..100  

configEPortTransientPhyDisconnectTimer 1.3.6.1.4.1.285.2.6.2.13.38.1.33
The duration (in seconds) of the time used for counting PHY disconnects.
OBJECT-TYPE    
  INTEGER  

configEPortBandwidthLimit 1.3.6.1.4.1.285.2.6.2.13.38.1.34
The maximum total bandwidth that may be used on this ATM port (in cells/seconds). A value of -1 indicates that the full link rate may be used.
OBJECT-TYPE    
  INTEGER  

configEPortDefaultSigVersion 1.3.6.1.4.1.285.2.6.2.13.38.1.35
The signalling version used if ILMI autoconfiguration is not possible.
OBJECT-TYPE    
  INTEGER uni(1), pnni(2), iispNetworkSide(3), iispUserSide(4)  

configEPortIlmiConfigMaxSvpcVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.36
The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs.
OBJECT-TYPE    
  INTEGER 0..4096  

configEPortIlmiConfigMaxSvccVpi 1.3.6.1.4.1.285.2.6.2.13.38.1.37
The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs.
OBJECT-TYPE    
  INTEGER 0..4096  

configEPortIlmiConfigMinSvccVci 1.3.6.1.4.1.285.2.6.2.13.38.1.38
The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which the signalling stack is configured.
OBJECT-TYPE    
  INTEGER 0..65536  

configEPortScratchPadDefaultSigVersion 1.3.6.1.4.1.285.2.6.2.13.39
A copy of configEPortDefaultSigVersion.
OBJECT-TYPE    
  INTEGER uni(1), pnni(2), iispNetworkSide(3), iispUserSide(4)  

configEPortScratchPadIlmiConfigMaxSvpcVpi 1.3.6.1.4.1.285.2.6.2.13.40
A copy of configEPortIlmiConfigMaxSvpcVpi.
OBJECT-TYPE    
  INTEGER 0..4096  

configEPortScratchPadIlmiConfigMaxSvccVpi 1.3.6.1.4.1.285.2.6.2.13.41
A copy of configEPortIlmiConfigMaxSvccVpi.
OBJECT-TYPE    
  INTEGER 0..4096  

configEPortScratchPadIlmiConfigMinSvccVci 1.3.6.1.4.1.285.2.6.2.13.42
A copy of configEPortIlmiConfigMinSvccVci.
OBJECT-TYPE    
  INTEGER 0..65536  

configCpuQ 1.3.6.1.4.1.285.2.6.2.14
OBJECT IDENTIFIER    

configCpuPortCpuQueueSize 1.3.6.1.4.1.285.2.6.2.14.1
The maximum size of the switch processor queue. This must be an number of the form 255+256*N, where N is an integer.
OBJECT-TYPE    
  INTEGER  

configCpuPortResetQueueSize 1.3.6.1.4.1.285.2.6.2.14.2
The maximum size of the reset queue. This must be an number of the form 255+256*N, where N is an integer.
OBJECT-TYPE    
  INTEGER  

configCommonIPort 1.3.6.1.4.1.285.2.6.2.15
OBJECT IDENTIFIER    

configCommonIPortQueueTable 1.3.6.1.4.1.285.2.6.2.15.1
This table contains configuration data for the four queues associated with each iPort.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigCommonIPortQueueEntry

configCommonIPortQueueEntry 1.3.6.1.4.1.285.2.6.2.15.1.1
Each row in this table contains data for one queue, but common to all iPorts.
OBJECT-TYPE    
  ConfigCommonIPortQueueEntry  

configCommonIPortQueueIndex 1.3.6.1.4.1.285.2.6.2.15.1.1.1
The queue number.
OBJECT-TYPE    
  INTEGER 1..4  

configCommonIPortEfciTaggingAdminStatus 1.3.6.1.4.1.285.2.6.2.15.1.1.2
Enables or disables Explicit Forward Congestion Indication (EFCI) on a queue.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configCommonIPortClpDiscardAdminStatus 1.3.6.1.4.1.285.2.6.2.15.1.1.3
Enables or disables discarding of CLP=1 cells on a queue.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configCommonIPortEfciTaggingThreshold 1.3.6.1.4.1.285.2.6.2.15.1.1.4
The queue length threshold beyond which cells in the queue are tagged with EFCI. The threshold is given as a fraction of the maximum queue length.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configCommonIPortClpDiscardThreshold 1.3.6.1.4.1.285.2.6.2.15.1.1.5
The queue length threshold beyond which CLP=1 cells are dropped rather than added to the queue. The threshold is given as a fraction of the maximum queue length.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configCommonIPortQueueSize 1.3.6.1.4.1.285.2.6.2.15.1.1.6
The maximum queue size. This must be an number of the form 255+256*N, where N is an integer.
OBJECT-TYPE    
  INTEGER  

configCommonIPortLogClr 1.3.6.1.4.1.285.2.6.2.15.1.1.7
The worst expected Cell Loss Ratio for this queue. The number is expressed as minus the base 10 logarithm of the Cell Loss Ratio.
OBJECT-TYPE    
  INTEGER  

configCommonIPortCdv 1.3.6.1.4.1.285.2.6.2.15.1.1.8
The worst expected Cell Delay Variation (in microseconds) for this queue.
OBJECT-TYPE    
  INTEGER  

configIPort 1.3.6.1.4.1.285.2.6.2.16
OBJECT IDENTIFIER    

configIPortScratchPadScratchPadStatus 1.3.6.1.4.1.285.2.6.2.16.1
Controls the copying of data between configIPort(Queue)Table and the iPort scratch pad.
OBJECT-TYPE    
  INTEGER notReady(1), copy(2), copied(3), updateAndGo(4)  

configIPortScratchPadSlotIndex 1.3.6.1.4.1.285.2.6.2.16.2
Set to the expansion module number in configIPort(Queue)Table before the contents of the row are copied to the iPort scratch pad.
OBJECT-TYPE    
  INTEGER 1..8  

configIPortScratchPadIPortRIndex 1.3.6.1.4.1.285.2.6.2.16.3
Set to the iPort number in configIPort(Queue)Table before the contents of the row are copied to the iPort scratch pad.
OBJECT-TYPE    
  INTEGER 1..2  

configIPortScratchPadIpAddress 1.3.6.1.4.1.285.2.6.2.16.4
The IP address of the manager that uses the iPort scratch pad. Used as a lock.
OBJECT-TYPE    
  IpAddress  

configIPortScratchPadActionStatus 1.3.6.1.4.1.285.2.6.2.16.5
The result of an attempt to copy between configEPortTable and the scratch pad.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), notPossible(3)  

configIPortScratchPadUseCommonIPortConfig 1.3.6.1.4.1.285.2.6.2.16.6
A copy of configIPortUseCommonIPortConfig.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

configIPortScratchPadQueueTable 1.3.6.1.4.1.285.2.6.2.16.7
A copy of configIPortQueueTable for one iPort.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigIPortScratchPadQueueEntry

configIPortScratchPadQueueEntry 1.3.6.1.4.1.285.2.6.2.16.7.1
Each row in this table describes one queue for one iPort.
OBJECT-TYPE    
  ConfigIPortScratchPadQueueEntry  

configIPortScratchPadQueueQueueIndex 1.3.6.1.4.1.285.2.6.2.16.7.1.1
A copy of configIPortQueueSlotIndex.
OBJECT-TYPE    
  INTEGER 1..4  

configIPortScratchPadQueueEfciTaggingAdminStatus 1.3.6.1.4.1.285.2.6.2.16.7.1.2
A copy of configIPortQueueEfciTaggingAdminStatus.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configIPortScratchPadQueueClpDiscardAdminStatus 1.3.6.1.4.1.285.2.6.2.16.7.1.3
A copy of configIPortQueueClpDiscardAdminStatus.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configIPortScratchPadQueueEfciTaggingThreshold 1.3.6.1.4.1.285.2.6.2.16.7.1.4
A copy of configIPortQueueEfciTaggingThreshold.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configIPortScratchPadQueueClpDiscardThreshold 1.3.6.1.4.1.285.2.6.2.16.7.1.5
A copy of configIPortQueueClpDiscardThreshold.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configIPortScratchPadQueueSize 1.3.6.1.4.1.285.2.6.2.16.7.1.6
A copy of configIPortQueueSize.
OBJECT-TYPE    
  INTEGER  

configIPortScratchPadQueueLogClr 1.3.6.1.4.1.285.2.6.2.16.7.1.7
A copy of configIPortQueueLogClr.
OBJECT-TYPE    
  INTEGER  

configIPortScratchPadQueueCdv 1.3.6.1.4.1.285.2.6.2.16.7.1.8
A copy of configIPortQueueCdv.
OBJECT-TYPE    
  INTEGER  

configIPortTable 1.3.6.1.4.1.285.2.6.2.16.8
This table contains configuration for each Core Access Point (iPort) in the switch. The table may be modified through the iPort scratch pad.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigIPortEntry

configIPortEntry 1.3.6.1.4.1.285.2.6.2.16.8.1
Each row in this table describes one Core Access Point (iPort).
OBJECT-TYPE    
  ConfigIPortEntry  

configIPortSlotIndex 1.3.6.1.4.1.285.2.6.2.16.8.1.1
The number of the expansion module to which the iPort is connected.
OBJECT-TYPE    
  INTEGER 1..8  

configIPortRIndex 1.3.6.1.4.1.285.2.6.2.16.8.1.2
The number of the iPort within the expansion module.
OBJECT-TYPE    
  INTEGER 1..2  

configIPortUseCommonIPortConfig 1.3.6.1.4.1.285.2.6.2.16.8.1.3
Indicates if this iPort should use the common iPort configuration (found in the configCommonIPort MIB subtree) or its own configuration.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

configIPortQueueTable 1.3.6.1.4.1.285.2.6.2.16.9
This table contains configuration for each queue. The table may be modified through the iPort scratch pad.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigIPortQueueEntry

configIPortQueueEntry 1.3.6.1.4.1.285.2.6.2.16.9.1
Each row in this table describes one queue.
OBJECT-TYPE    
  ConfigIPortQueueEntry  

configIPortQueueSlotIndex 1.3.6.1.4.1.285.2.6.2.16.9.1.1
The number of the expansion module to which the iPort for this queue is connected.
OBJECT-TYPE    
  INTEGER 1..8  

configIPortQueueRIndex 1.3.6.1.4.1.285.2.6.2.16.9.1.2
The number of the iPort within the expansion module.
OBJECT-TYPE    
  INTEGER 1..2  

configIPortQueueQueueIndex 1.3.6.1.4.1.285.2.6.2.16.9.1.3
The queue priority.
OBJECT-TYPE    
  INTEGER 1..4  

configIPortQueueEfciTaggingAdminStatus 1.3.6.1.4.1.285.2.6.2.16.9.1.4
Enables or disables Explicit Forward Congestion Indication (EFCI) on this queue.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configIPortQueueClpDiscardAdminStatus 1.3.6.1.4.1.285.2.6.2.16.9.1.5
Enables or disables discarding of CLP=1 cells on this queue.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configIPortQueueEfciTaggingThreshold 1.3.6.1.4.1.285.2.6.2.16.9.1.6
The queue length threshold beyond which cells in the queue are tagged with EFCI. The threshold is given as a fraction of the maximum queue length.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configIPortQueueClpDiscardThreshold 1.3.6.1.4.1.285.2.6.2.16.9.1.7
The queue length threshold beyond which CLP=1 cells are dropped rather than added to the queue. The threshold is given as a fraction of the maximum queue length.
OBJECT-TYPE    
  INTEGER oneEighth(1), oneFourth(2), oneHalf(3)  

configIPortQueueSize 1.3.6.1.4.1.285.2.6.2.16.9.1.8
The maximum queue size. This must be an number of the form 255+256*N, where N is an integer.
OBJECT-TYPE    
  INTEGER  

configIPortQueueLogClr 1.3.6.1.4.1.285.2.6.2.16.9.1.9
The worst expected Cell Loss Ratio for this queue. The number is expressed as minus the base 10 logarithm of the Cell Loss Ratio.
OBJECT-TYPE    
  INTEGER  

configIPortQueueCdv 1.3.6.1.4.1.285.2.6.2.16.9.1.10
The worst expected Cell Delay Variation (in microseconds) for this queue.
OBJECT-TYPE    
  INTEGER  

configPvpPvc 1.3.6.1.4.1.285.2.6.2.17
OBJECT IDENTIFIER    

pvpSetupTableNextIndex 1.3.6.1.4.1.285.2.6.2.17.1
The next unused row in pvpSetupTable.
OBJECT-TYPE    
  INTEGER  

pvpSetupTable 1.3.6.1.4.1.285.2.6.2.17.2
This table contains all Permanent Virtual Paths (PVPs) in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    PvpSetupEntry

pvpSetupEntry 1.3.6.1.4.1.285.2.6.2.17.2.1
Each row in this table describes one PVP. PVPs typically connect two ATM ports. The numerically lowest of these is called the 'low' port, and the numerically highest is called the 'high' port.
OBJECT-TYPE    
  PvpSetupEntry  

pvpSetupIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

pvpSetupApplication 1.3.6.1.4.1.285.2.6.2.17.2.1.2
The PVP type. The value 'transitVp' indicates a PVP that passes through the switch and has high and low end configuration. The value 'softPvpOriginatorVpl' indicates a PVP that terminates in the switch itself and only low end configuration is present.
OBJECT-TYPE    
  INTEGER transitVp(1), softPvpOriginatorVpl(2)  

pvpSetupLowEPortIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.3
The ifIndex of the low port connected to this PVP.
OBJECT-TYPE    
  INTEGER  

pvpSetupLowVpi 1.3.6.1.4.1.285.2.6.2.17.2.1.4
The VPI used at the low end of the PVP.
OBJECT-TYPE    
  INTEGER  

pvpSetupHighEPortIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.5
The ifIndex of the high port connected to this PVP.
OBJECT-TYPE    
  INTEGER  

pvpSetupHighVpi 1.3.6.1.4.1.285.2.6.2.17.2.1.6
The VPI used at the high end of the PVP.
OBJECT-TYPE    
  INTEGER  

pvpSetupVpCrossConnectIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.7
After the PVP has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

pvpSetupL2HTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.8
The index into the trafficDescriptorTable for the traffic descriptor used in the direction low-to-high.
OBJECT-TYPE    
  INTEGER  

pvpSetupH2LTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.17.2.1.9
The index into the trafficDescriptorTable for the traffic descriptor used in the direction high-to-low.
OBJECT-TYPE    
  INTEGER  

pvpSetupRowStatus 1.3.6.1.4.1.285.2.6.2.17.2.1.10
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

pvcSetupTableNextIndex 1.3.6.1.4.1.285.2.6.2.17.3
The next unused row in pvcSetupTable.
OBJECT-TYPE    
  INTEGER  

pvcSetupTable 1.3.6.1.4.1.285.2.6.2.17.4
This table contains all Permanent Virtual Channels (PVCs) in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    PvcSetupEntry

pvcSetupEntry 1.3.6.1.4.1.285.2.6.2.17.4.1
Each row in this table describes one PVC. PVCs typically connect two ATM ports. The numerically lowest of these is called the 'low' port, and the numerically highest is called the 'high' port.
OBJECT-TYPE    
  PvcSetupEntry  

pvcSetupIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

pvcSetupApplication 1.3.6.1.4.1.285.2.6.2.17.4.1.2
The PVC type. The value 'transitVc' indicates a PVC that passes through the switch and has high and low end configuration. The other values indicate a PVP that terminates in the switch itself and only low end configuration is present. Legal values are: transitVc A PVC that passes through the switch. softPvcOriginatorVcl One end of a soft PVC. classicalIpArpSrvVcl The PVC connects the classical IP ARP server to the specified ATM port. lesCntrlDirectVcl The PVC connects the LAN Emulation Server (LES) to the specified ATM port. busMcastSendVcl The PVC connects the Broadcast and Unknown Server (BUS) to the specified ATM port.
OBJECT-TYPE    
  INTEGER transitVc(1), softPvcOriginatorVcl(2), classicalIpArpSrvVcl(3), lesCntrlDirectVcl(4), busMcastSendVcl(5)  

pvcSetupLowEPortIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.3
The ifIndex of the low port connected to this PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupLowVpi 1.3.6.1.4.1.285.2.6.2.17.4.1.4
The VPI used at the low end of the PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupLowVci 1.3.6.1.4.1.285.2.6.2.17.4.1.5
The VCI used at the low end of the PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupHighEPortIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.6
The ifIndex of the high port connected to this PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupHighVpi 1.3.6.1.4.1.285.2.6.2.17.4.1.7
The VPI used at the high end of the PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupHighVci 1.3.6.1.4.1.285.2.6.2.17.4.1.8
The VCI used at the high end of the PVC.
OBJECT-TYPE    
  INTEGER  

pvcSetupVcCrossConnectIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.9
After the PVC has been created, this is the index into the atmVcCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

pvcSetupL2HTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.10
The index into the trafficDescriptorTable for the traffic descriptor used in the direction low-to-high.
OBJECT-TYPE    
  INTEGER  

pvcSetupH2LTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.17.4.1.11
The index into the trafficDescriptorTable for the traffic descriptor used in the direction high-to-low.
OBJECT-TYPE    
  INTEGER  

pvcSetupRowStatus 1.3.6.1.4.1.285.2.6.2.17.4.1.12
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

configSvpSvc 1.3.6.1.4.1.285.2.6.2.18
OBJECT IDENTIFIER    

svpSetupTableNextIndex 1.3.6.1.4.1.285.2.6.2.18.1
The next unused row in svpSetupTable.
OBJECT-TYPE    
  INTEGER  

svpSetupTable 1.3.6.1.4.1.285.2.6.2.18.2
This table contains all Soft Virtual Paths (SVPs) in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    SvpSetupEntry

svpSetupEntry 1.3.6.1.4.1.285.2.6.2.18.2.1
Each row in this table describes one SVP.
OBJECT-TYPE    
  SvpSetupEntry  

svpSetupIndex 1.3.6.1.4.1.285.2.6.2.18.2.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

svpSetupApplication 1.3.6.1.4.1.285.2.6.2.18.2.1.2
The SVP type. Only one type (tunnel) is currently available.
OBJECT-TYPE    
  INTEGER tunnel(1)  

svpSetupEPortIndex 1.3.6.1.4.1.285.2.6.2.18.2.1.3
The ifIndex of the ATM port connected to this SVP.
OBJECT-TYPE    
  INTEGER  

svpSetupPreferredVpi 1.3.6.1.4.1.285.2.6.2.18.2.1.4
The preferred VPI number to use on the ATM port given in svpSetupEPortIndex.
OBJECT-TYPE    
  INTEGER  

svpSetupTermAtmAddr 1.3.6.1.4.1.285.2.6.2.18.2.1.5
The ATM address to which the SVP should be connected.
OBJECT-TYPE    
  AtmAddress  

svpSetupVpCrossConnectIndex 1.3.6.1.4.1.285.2.6.2.18.2.1.6
After the SVP has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

svpSetupTxTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.18.2.1.7
The index into the trafficDescriptorTable for the traffic descriptor used in the direction svpSetupEPortIndex-to-svpSetupTermAtmAddr.
OBJECT-TYPE    
  INTEGER  

svpSetupRxTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.18.2.1.8
The index into the trafficDescriptorTable for the traffic descriptor used in the direction svpSetupTermAtmAddr-to-svpSetupEPortIndex.
OBJECT-TYPE    
  INTEGER  

svpSetupRowStatus 1.3.6.1.4.1.285.2.6.2.18.2.1.9
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

svcSetupTableNextIndex 1.3.6.1.4.1.285.2.6.2.18.3
The next unused row in svcSetupTable.
OBJECT-TYPE    
  INTEGER  

svcSetupTable 1.3.6.1.4.1.285.2.6.2.18.4
This table contains all Soft Virtual Channels (SVCs) in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    SvcSetupEntry

svcSetupEntry 1.3.6.1.4.1.285.2.6.2.18.4.1
Each row in this table describes one SVC.
OBJECT-TYPE    
  SvcSetupEntry  

svcSetupIndex 1.3.6.1.4.1.285.2.6.2.18.4.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

svcSetupApplication 1.3.6.1.4.1.285.2.6.2.18.4.1.2
The SVC type. The following values exist: classicalIpArpSrv The SVC connects the classical IP ARP server with the specified ATM address. lecsConfigDirectSvc The SVC connects the LAN Emulation Configuration Server (LECS) with the specified ATM address. lesCntrlDirectSvc The SVC connects the LAN Emulation Server (LES) with the specified ATM address. busMcastSendSvc The SVC connects the Broadcast and Unknown Server (BUS) with the specified ATM address.
OBJECT-TYPE    
  INTEGER classicalIpArpSrv(1), lecsConfigDirectSvc(2), lesCntrlDirectSvc(3), busMcastSendSvc(4)  

svcSetupTermAtmAddr 1.3.6.1.4.1.285.2.6.2.18.4.1.3
The ATM address to which the SVC should be connected.
OBJECT-TYPE    
  AtmAddress  

svcSetupVcCrossConnectIndex 1.3.6.1.4.1.285.2.6.2.18.4.1.4
After the SVC has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

svcSetupTxTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.18.4.1.5
The index into the trafficDescriptorTable for the traffic descriptor used in the direction switch-to-svcSetupTermAtmAddr.
OBJECT-TYPE    
  INTEGER  

svcSetupRxTrafficDescriptorIndex 1.3.6.1.4.1.285.2.6.2.18.4.1.6
The index into the trafficDescriptorTable for the traffic descriptor used in the direction svcSetupTermAtmAddr-to-switch.
OBJECT-TYPE    
  INTEGER  

svcSetupRowStatus 1.3.6.1.4.1.285.2.6.2.18.4.1.7
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

configCommonSignalling 1.3.6.1.4.1.285.2.6.2.19
OBJECT IDENTIFIER    

configCommonSignallingMaxTunnels 1.3.6.1.4.1.285.2.6.2.19.1
The maximum number of additional signalling and SSCOP incarnations needed to service tunnels.
OBJECT-TYPE    
  INTEGER 1..16  

configCommonSignallingMaxSaps 1.3.6.1.4.1.285.2.6.2.19.2
The maximum number of SAPs (logical users) supported by the signalling subsystem. This value must be at least the number of ATM ports present plus the number of virtual ports (for LEC, LES and CLIP) plus the number of signalling tunnels.
OBJECT-TYPE    
  INTEGER 1..511  

configCommonSignallingMaxPvcs 1.3.6.1.4.1.285.2.6.2.19.3
The maximum number of simultaneously active PVCs (connections) in the entire switch.
OBJECT-TYPE    
  INTEGER 1..8192  

configCommonSignallingMaxSvcs 1.3.6.1.4.1.285.2.6.2.19.4
The maximum number of simultaneously active SVCs (calls/connections) signalling instances in the entire switch. Note that each call/connection through the switch uses two of these (in and out), so the maximum number of SVC calls/connections through the switch is half this value. This values encompasses both point-to-point SVCs and SVPs, as well as point-to-multipoint SVCs (basic call part of pt-to-mpt connection).
OBJECT-TYPE    
  INTEGER 1..16384  

configCommonSignallingMaxConManStevs 1.3.6.1.4.1.285.2.6.2.19.5
The maximum number of Connection Manager state-event machines, i.e. the maximum number of SVC+PVC calls/connections being processed simultaneously.
OBJECT-TYPE    
  INTEGER 1..128  

configCommonSignallingMaxSigProtStevs 1.3.6.1.4.1.285.2.6.2.19.6
The maximum number SVC calls/connections setup or clear operations that can be processed concurrently in the entire switch. Actually twice this number of call processors will be allocated - half for incoming and half for outgoing operations. Since the switch uses two call processors for a 'through-switch' call (one incoming and one outgoing), this means that this value directly describes the number of simultaneous 'through-switch' call/connection setup or clear operations supported by the switch.
OBJECT-TYPE    
  INTEGER 1..128  

configCommonSignallingT301 1.3.6.1.4.1.285.2.6.2.19.7
The maximum time (in seconds) to wait for CONNECT after receiving ALERTING. Should be at least 3 minutes (180 seconds).
OBJECT-TYPE    
  INTEGER 1..65535  

configCommonSignallingT302 1.3.6.1.4.1.285.2.6.2.19.8
For N-ISDN interworking. Currently not used.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT303 1.3.6.1.4.1.285.2.6.2.19.9
The maximum time (in seconds) to wait for response to SETUP (i.e. CALL-PROCEEDING, ALERTING or CONNECT).
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT304 1.3.6.1.4.1.285.2.6.2.19.10
For N-ISDN interworking. Currently not used.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT306 1.3.6.1.4.1.285.2.6.2.19.11
For N-ISDN interworking. Currently not used.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT308 1.3.6.1.4.1.285.2.6.2.19.12
The maximum time to wait for response to RELEASE.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT309 1.3.6.1.4.1.285.2.6.2.19.13
The maximum time (in seconds) allowing SAAL (SSCOP) connection loss. If SSCOP experiences connection loss for longer than this time for a signalling connection, the signalling instance will clear all its calls: active calls, as well as calls under establishment. The switch will propagate these call clearings through towards the remote endpoint.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT310 1.3.6.1.4.1.285.2.6.2.19.14
The maximum time (in seconds) to wait for response to SETUP (i.e. ALERTING or CONNECT) after receiving CALL PROCEEDING.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT313 1.3.6.1.4.1.285.2.6.2.19.15
The maximum time (in seconds) to wait for response to CONNECT.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT316 1.3.6.1.4.1.285.2.6.2.19.16
The maximum time (in seconds) to wait for response to RESTART.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT317 1.3.6.1.4.1.285.2.6.2.19.17
The maximum time (in seconds) to act on RESTART. Should be less than configCommonSignallingT316.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT322 1.3.6.1.4.1.285.2.6.2.19.18
The maximum time (in seconds) to wait for response to STATUS ENQUIRY.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT331 1.3.6.1.4.1.285.2.6.2.19.19
For Leaf Initiated Join support: The maximum time (in seconds) to wait for response to LEAF SETUP REQUEST.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT333 1.3.6.1.4.1.285.2.6.2.19.20
This timer value is no longer used. Was removed from final UNI4.0 signalling specification.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT397 1.3.6.1.4.1.285.2.6.2.19.21
The maximum time (in seconds) to wait for ADD PARTY ACK after receiving ALERTING or ADD PARTY ALERTED. Should be minimum 3 minutes (180 seconds). Note: Should usually be the same as configCommonSignallingT301.
OBJECT-TYPE    
  INTEGER 1..1000  

configCommonSignallingT398 1.3.6.1.4.1.285.2.6.2.19.22
For point-to-multipoint support: The maximum time (in seconds) to wait for response to DROP PARTY.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingT399 1.3.6.1.4.1.285.2.6.2.19.23
For point-to-multipoint support: The maximum time (in seconds) to wait for response to ADD PARTY.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingPtmpMaxLeafs 1.3.6.1.4.1.285.2.6.2.19.24
The maximum number of simultaneously active point-to-multipoint SVC leaf connection signalling instances (in the entire switch). Note that each leaf connection through the switch uses two of these (in and out), so the maximum number of SVC leaf connections through the switch is half this value.
OBJECT-TYPE    
  INTEGER 1..16384  

configCommonSignallingPtmpMaxLeafOperations 1.3.6.1.4.1.285.2.6.2.19.25
The maximum number of signalling pt-to-mpt SVC leaf add or drop operations that can be processed concurrently in the entire switch. Actually twice this number of leaf processors will be allocated - half for incoming and half for outgoing operations. So since the switch uses two leaf processors (one incoming and one outgoing) to process a 'through-switch' operation, this means that this value directly describes the number of simultaneous 'through-switch' leaf add or drop operations supported by the switch.
OBJECT-TYPE    
  INTEGER 1..128  

configCommonSignallingPtmpMaxLeafsDropByClear 1.3.6.1.4.1.285.2.6.2.19.26
The maximum number of concurrent leaf drop operations (for a single pt-to-mpt connection) when initiated by call clearing.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSignallingPtmpMaxP2mpSvcs 1.3.6.1.4.1.285.2.6.2.19.27
The maximum number of the Signalling SVCs in the switch that can provide point-to-multipoint support. Note that each pt-to-mpt connection through the switch uses two of these (incoming and outgoing), so the maximum number of SVCs that can provide pt-to-mpt support through the switch is half this value.
OBJECT-TYPE    
  INTEGER 1..1024  

configCommonSscopMaxSaps 1.3.6.1.4.1.285.2.6.2.19.28
The maximum number of SSCOP SAPs. This value is not used.
OBJECT-TYPE    
  INTEGER  


configCommonSscopMaxRcvWinSize 1.3.6.1.4.1.285.2.6.2.19.30
The maximum SSCOP protocol receive window size. Q.2110, app.IV, defines calculation of window size.
OBJECT-TYPE    
  INTEGER 1..16777215  

configCommonSscopMaxCc 1.3.6.1.4.1.285.2.6.2.19.31
The maximum SSCOP Connection Control state variable value (the maximum transmissions of a BGN, END, ER or RS PDU).
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopMaxPd 1.3.6.1.4.1.285.2.6.2.19.32
The maximum SSCOP Poll Data state variable value (the maximum transmissions of between polls).
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopMaxStat 1.3.6.1.4.1.285.2.6.2.19.33
The maximum number of list elements placed in a SSCOP STAT PDU.
OBJECT-TYPE    
  INTEGER 3..1023  

configCommonSscopTimerPoll 1.3.6.1.4.1.285.2.6.2.19.34
SSCOP Timer-POLL (in milliseconds). This defines the maximum interval between SSCOP sending POLLs, while it has unacknowledged SD PDU transmits. Ensures that peer receiver is polled often enough to return its status. Optimized to maintain optimum flow. Timer-NO-RESPONSE must be greater than timer-POLL.
OBJECT-TYPE    
  INTEGER 1..10000  

configCommonSscopTimerNoResponse 1.3.6.1.4.1.285.2.6.2.19.35
SSCOP Timer-NO-RESPONSE (in seconds). The time interval during which at least one STAT PDU must be received, when there are unacknowledged SD PDU transmits. Must be at least Timer-KEEP-ALIVE + round-trip delay. Timer-NO-RESPONSE must be greater than timer-POLL.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopTimerKeepAlive 1.3.6.1.4.1.285.2.6.2.19.36
SSCOP Timer-KEEP-ALIVE (in seconds). Used when there are no unacknowledged SD PDU transmits. Defines the time period after sending a POLL, during which a STAT response must have been received. Generally, this value is greater than both Timer-POLL and round-trip delay.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopTimerIdle 1.3.6.1.4.1.285.2.6.2.19.37
SSCOP Timer-IDLE (in seconds). Defines the idle-period during which no POLL PDUs are sent, when there are no unacknowledged SD PDU transmits. May be much greater than Timer-KEEP-ALIVE.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopTimerCc 1.3.6.1.4.1.285.2.6.2.19.38
SSCOP Timer-CC (in units of 100 milliseconds). Defines the maximum time to wait for response, during outgoing link establish, release, resynch and recovery. Should be somewhat greater than a round-trip delay.
OBJECT-TYPE    
  INTEGER 1..255  

configCommonSscopMaxSduSize 1.3.6.1.4.1.285.2.6.2.19.39
The maximum SSCOP SDU size (SAAL Service Data Unit size) in bytes.
OBJECT-TYPE    
  INTEGER 512..16384  

configCommonSscopMaxUuSize 1.3.6.1.4.1.285.2.6.2.19.40
The maximum SSCOP UU size (User-to-User data size) in bytes. Note: This value is currently not needed according to Q.2130, and hence not used.
OBJECT-TYPE    
  INTEGER 512..16384  

configIisp 1.3.6.1.4.1.285.2.6.2.20
OBJECT IDENTIFIER    

configNextHopRoutingTableNextIndex 1.3.6.1.4.1.285.2.6.2.20.1
The next unused row in configNextHopRoutingTable.
OBJECT-TYPE    
  INTEGER  

configNextHopRoutingTable 1.3.6.1.4.1.285.2.6.2.20.2
This table contains the IISP routing information.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigNextHopRoutingEntry

configNextHopRoutingEntry 1.3.6.1.4.1.285.2.6.2.20.2.1
Each row in this table describes the route to one ATM address prefix.
OBJECT-TYPE    
  ConfigNextHopRoutingEntry  

configNextHopRoutingIndex 1.3.6.1.4.1.285.2.6.2.20.2.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

configNextHopRoutingAtmAddress 1.3.6.1.4.1.285.2.6.2.20.2.1.2
The ATM address or ATM summary address to which this row describes a route.
OBJECT-TYPE    
  AtmAddress  

configNextHopRoutingAddressLength 1.3.6.1.4.1.285.2.6.2.20.2.1.3
The number of valid bits in configNextHopRoutingAtmAddress.
OBJECT-TYPE    
  INTEGER  

configNextHopRoutingEPort 1.3.6.1.4.1.285.2.6.2.20.2.1.4
The ifIndex of the ATM port that leads to the specified ATM address.
OBJECT-TYPE    
  INTEGER  

configNextHopRoutingSignallingType 1.3.6.1.4.1.285.2.6.2.20.2.1.5
Not used.
OBJECT-TYPE    
  INTEGER userSide(1), networkSide(2)  

configNextHopRoutingRowStatus 1.3.6.1.4.1.285.2.6.2.20.2.1.6
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

configIpArp 1.3.6.1.4.1.285.2.6.2.21
OBJECT IDENTIFIER    

atmIpArpTable 1.3.6.1.4.1.285.2.6.2.21.1
This table contains the IP-address-to-ATM-address translation table used by the IP ARP server.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIpArpEntry

atmIpArpEntry 1.3.6.1.4.1.285.2.6.2.21.1.1
Each row in this table describes one IP address.
OBJECT-TYPE    
  AtmIpArpEntry  

atmIpArpServerIndex 1.3.6.1.4.1.285.2.6.2.21.1.1.1
The index of the IP ARP server that handles this row.
OBJECT-TYPE    
  INTEGER  

atmIpArpIpAddress 1.3.6.1.4.1.285.2.6.2.21.1.1.2
The IP address that this row translates.
OBJECT-TYPE    
  IpAddress  

atmIpArpAtmAddress 1.3.6.1.4.1.285.2.6.2.21.1.1.3
The ATM address that corresponds to atmIpArpIpAddress.
OBJECT-TYPE    
  AtmAddress  

atmIpArpType 1.3.6.1.4.1.285.2.6.2.21.1.1.4
The entry type. 'Dynamic' means created automatically, 'static' means created by management.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), dynamic(3), static(4)  

configIpArpServerTableNextIndex 1.3.6.1.4.1.285.2.6.2.21.2
The next unused row in configIpArpServerTable.
OBJECT-TYPE    
  INTEGER  

configIpArpServerTable 1.3.6.1.4.1.285.2.6.2.21.3
This table is used to create and configure the IP ARP servers.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigIpArpServerEntry

configIpArpServerEntry 1.3.6.1.4.1.285.2.6.2.21.3.1
Each row in this table describes one IP ARP server, servicing one IP subnet.
OBJECT-TYPE    
  ConfigIpArpServerEntry  

configIpArpServerIndex 1.3.6.1.4.1.285.2.6.2.21.3.1.1
An arbitrary integer used to differentiate multiple rows containing different IP ARP servers.
OBJECT-TYPE    
  INTEGER  

configIpArpServerAtmAddressSpec 1.3.6.1.4.1.285.2.6.2.21.3.1.2
An ATM Address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the IP ARP Server will use to derive the actual ATM address from the network or ILMI. The derived ATM address is specified in the object configIpArpServerAtmAddressActual, which is used to receive ATM IP ARP requests.
OBJECT-TYPE    
  AtmAddress  

configIpArpServerAtmAddressMask 1.3.6.1.4.1.285.2.6.2.21.3.1.3
The ATM address mask associated with the object configIpArpServerAtmAddressSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one.
OBJECT-TYPE    
  AtmAddress  

configIpArpServerAtmAddressActual 1.3.6.1.4.1.285.2.6.2.21.3.1.4
The resultant ATM address in use by the IP ARP Server. This object is a product of the specified ATM address, mask, and interaction with the network. This object is created by the agent.
OBJECT-TYPE    
  AtmAddress  

configIpArpServerIpSubnetAddress 1.3.6.1.4.1.285.2.6.2.21.3.1.5
The address of the IP subnet serviced by this IP ARP server.
OBJECT-TYPE    
  IpAddress  

configIpArpServerIpSubnetMask 1.3.6.1.4.1.285.2.6.2.21.3.1.6
The subnet mask of the IP subnet serviced by this IP ARP server.
OBJECT-TYPE    
  IpAddress  

configIpArpServerAdminStatus 1.3.6.1.4.1.285.2.6.2.21.3.1.7
Enables or disable the IP ARP server.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

configIpArpServerOperStatus 1.3.6.1.4.1.285.2.6.2.21.3.1.8
Operational state of this IP ARP Server entry.
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

configIpArpServerRowStatus 1.3.6.1.4.1.285.2.6.2.21.3.1.9
Used to control creation and deletion of new rows in the table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

configClipArpServer 1.3.6.1.4.1.285.2.6.2.21.4
The ATM address of the IP ARP server used by the CLIP client in the switch.
OBJECT-TYPE    
  AtmAddress  

configQosClass 1.3.6.1.4.1.285.2.6.2.22
OBJECT IDENTIFIER    

qosClassTable 1.3.6.1.4.1.285.2.6.2.22.1
This table provides the translation between the Quality of Service (QoS) classes used in UNI 3.1 signalling and the corresponding values of the QoS parameters. Only classes 1 through 4 can be configured.
OBJECT-TYPE    
  SEQUENCE OF  
    QosClassEntry

qosClassEntry 1.3.6.1.4.1.285.2.6.2.22.1.1
Each row in this table describes one QoS class.
OBJECT-TYPE    
  QosClassEntry  

qosClassClass 1.3.6.1.4.1.285.2.6.2.22.1.1.1
The QoS class number.
OBJECT-TYPE    
  INTEGER 1..4  

qosClassCtd 1.3.6.1.4.1.285.2.6.2.22.1.1.2
The Cell Transfer Delay (in microseconds) for this QoS class.
OBJECT-TYPE    
  INTEGER  

qosClassCdv 1.3.6.1.4.1.285.2.6.2.22.1.1.3
The Cell Delay Variation (in microseconds) for this QoS class.
OBJECT-TYPE    
  INTEGER  

qosClassLogClr 1.3.6.1.4.1.285.2.6.2.22.1.1.4
Minus the base 10 logarithm of the Cell Loss Ratio for this QoS class.
OBJECT-TYPE    
  INTEGER  

configSerial 1.3.6.1.4.1.285.2.6.2.23
OBJECT IDENTIFIER    

configSerialObmSlip 1.3.6.1.4.1.285.2.6.2.23.1
Controls if the serial line is used for OBM or SLIP.
OBJECT-TYPE    
  INTEGER none(1), obm(2), slip(3)  

configOam 1.3.6.1.4.1.285.2.6.2.24
OBJECT IDENTIFIER    

ifMIBObjects 1.3.6.1.4.1.285.2.6.2.24.1
OBJECT IDENTIFIER    

ifTestTable 1.3.6.1.4.1.285.2.6.2.24.1.3
This table contains one entry per interface. It is a copy of the ifTestTable in the ifMIB as defined in RFC 1573.
OBJECT-TYPE    
  SEQUENCE OF  
    IfTestEntry

ifTestEntry 1.3.6.1.4.1.285.2.6.2.24.1.3.1
An entry containing objects for invoking tests on an interface.
OBJECT-TYPE    
  IfTestEntry  

ifTestId 1.3.6.1.4.1.285.2.6.2.24.1.3.1.1
This object identifies the current invocation of the interface's test. The type of this object is identical to the textual convention TestAndIncr, defined in RFC 1903.
OBJECT-TYPE    
  INTEGER 0..2147483647  

ifTestStatus 1.3.6.1.4.1.285.2.6.2.24.1.3.1.2
This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
OBJECT-TYPE    
  INTEGER notInUse(1), inUse(2)  

ifTestType 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3
A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ifTestResult 1.3.6.1.4.1.285.2.6.2.24.1.3.1.4
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
OBJECT-TYPE    
  INTEGER none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)  

ifTestCode 1.3.6.1.4.1.285.2.6.2.24.1.3.1.5
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 1443. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ifTestOwner 1.3.6.1.4.1.285.2.6.2.24.1.3.1.6
The entity which currently has the 'ownership' required to invoke a test on this interface.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

atmTESTMIBObjects 1.3.6.1.4.1.285.2.6.2.24.2
OBJECT IDENTIFIER    

atmLoopbackTestGroup 1.3.6.1.4.1.285.2.6.2.24.2.1
OBJECT IDENTIFIER    

atmLoopbackTestTypes 1.3.6.1.4.1.285.2.6.2.24.2.1.4
OBJECT IDENTIFIER    

atmLoopbackVpE2e 1.3.6.1.4.1.285.2.6.2.24.2.1.4.1
OBJECT IDENTIFIER    

atmLoopbackVcE2e 1.3.6.1.4.1.285.2.6.2.24.2.1.4.2
OBJECT IDENTIFIER    

atmLoopbackVpSegment 1.3.6.1.4.1.285.2.6.2.24.2.1.4.3
OBJECT IDENTIFIER    

atmLoopbackVcSegment 1.3.6.1.4.1.285.2.6.2.24.2.1.4.4
OBJECT IDENTIFIER    

configTest 1.3.6.1.4.1.285.2.6.2.25
OBJECT IDENTIFIER    

controlDeleteCode 1.3.6.1.4.1.285.2.6.2.25.1
Writing a value of 0x54455354 (i.e. 'TEST') to this object causes both installed code blocks to be erased
OBJECT-TYPE    
  INTEGER  

controlDeleteConfig 1.3.6.1.4.1.285.2.6.2.25.2
Writing a value of 0x54455354 (i.e. 'TEST') to this object causes the configuration flash to be erased
OBJECT-TYPE    
  INTEGER  

configPriorityBuffer 1.3.6.1.4.1.285.2.6.2.26
OBJECT IDENTIFIER    

configPriorityBufferTable 1.3.6.1.4.1.285.2.6.2.26.1
This table contains the maximum total number of cells buffers that may be allocated to a particular queue priority.
OBJECT-TYPE    
  SEQUENCE OF  
    ConfigPriorityBufferEntry

configPriorityBufferEntry 1.3.6.1.4.1.285.2.6.2.26.1.1
Each row in this table describes one queue priority.
OBJECT-TYPE    
  ConfigPriorityBufferEntry  

configPriorityBufferIndex 1.3.6.1.4.1.285.2.6.2.26.1.1.1
The queue priority.
OBJECT-TYPE    
  INTEGER 1..4  

configPriorityBufferSize 1.3.6.1.4.1.285.2.6.2.26.1.1.2
The maximum total cell buffer allocation for this queue priority.
OBJECT-TYPE    
  INTEGER  

crossfireAtmStatus 1.3.6.1.4.1.285.2.6.3
OBJECT IDENTIFIER    

globalCongestionTrap 1.3.6.1.4.1.285.2.6.3
The rate of globally discarded cells/second rises or falls above/below defined threshold.
TRAP-TYPE    
  statsGlobalCongestionState  
  statsGlobalCongestionDiscardCellRate  
  controlTime  

statusBasicHw 1.3.6.1.4.1.285.2.6.3.1
OBJECT IDENTIFIER    

statusHwChassisCurrentXModules 1.3.6.1.4.1.285.2.6.3.1.1
The number of installed expansion modules.
OBJECT-TYPE    
  INTEGER 0..8  

statusHwChassisCurrentEPorts 1.3.6.1.4.1.285.2.6.3.1.2
The number of installed ATM ports.
OBJECT-TYPE    
  INTEGER 0..96  

statusHwChassisUpsOperState 1.3.6.1.4.1.285.2.6.3.1.3
The operational state of the Uninterrupted Power Supply (UPS).
OBJECT-TYPE    
  INTEGER operational(1), inUse(2), failed(3), notPresent(4)  

statusHwChassisSwitchingSystemSize 1.3.6.1.4.1.285.2.6.3.1.4
The number of Core Access Points in the switch.
OBJECT-TYPE    
  INTEGER 16..32  

statusHwChassisCellBufferSize 1.3.6.1.4.1.285.2.6.3.1.5
The size (in K cells) of the switch core cell buffer.
OBJECT-TYPE    
  INTEGER 16..64  

statusCurrentTemperatureConditionState 1.3.6.1.4.1.285.2.6.3.1.6
The current state of the temperature within the switch. Possible values are: normal The temperature is below fhTrapDashboardControlThresholdLow. highDecreasing The temperature is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The temperature is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The temperature is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the temperatureWarning entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statusCurrentTemperatureGauge 1.3.6.1.4.1.285.2.6.3.1.7
The current temperature in degrees Celsius.
OBJECT-TYPE    
  Gauge  

statusCurrentTemperatureLatch 1.3.6.1.4.1.285.2.6.3.1.8
Indicates if the temperature has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statusCurrentTemperatureLatchTime 1.3.6.1.4.1.285.2.6.3.1.9
The value of sysUpTime when the system turned statusCurrentTemperatureLatch on.
OBJECT-TYPE    
  TimeTicks  

statusFanOperStatus 1.3.6.1.4.1.285.2.6.3.1.10
Indicates if the fan is running.
OBJECT-TYPE    
  INTEGER inService(1), outOfService(2)  

statusPsuStatusTable 1.3.6.1.4.1.285.2.6.3.1.11
This table contains status information about the two power supplies in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    StatusPsuStatusEntry

statusPsuStatusEntry 1.3.6.1.4.1.285.2.6.3.1.11.1
Each row in this table describes one power supply.
OBJECT-TYPE    
  StatusPsuStatusEntry  

statusPsuIndex 1.3.6.1.4.1.285.2.6.3.1.11.1.1
The power supply number.
OBJECT-TYPE    
  INTEGER 1..2  

statusPsuOperStatus 1.3.6.1.4.1.285.2.6.3.1.11.1.2
Indicates the operational state of the power supply.
OBJECT-TYPE    
  INTEGER inService(1), outOfService(2)  

statusProcessorModule 1.3.6.1.4.1.285.2.6.3.2
OBJECT IDENTIFIER    

statusProcessorModuleStatusLed 1.3.6.1.4.1.285.2.6.3.2.1
Indicates the state of the status LED on the processor module.
OBJECT-TYPE    
  INTEGER off(1), on(2), flash(3)  

statusProcessorModuleFaultLed 1.3.6.1.4.1.285.2.6.3.2.2
Indicates the state of the fault LED on the processor module.
OBJECT-TYPE    
  INTEGER off(1), on(2), flash(3)  

statusFeatureModule 1.3.6.1.4.1.285.2.6.3.3
OBJECT IDENTIFIER    

statusFeatureModuleOperStatus 1.3.6.1.4.1.285.2.6.3.3.1
Indicates the operational state of the feature module.
OBJECT-TYPE    
  INTEGER inService(1), outOfService(2), testing(3), unknown(4)  

statusFeatureModuleStatusLed 1.3.6.1.4.1.285.2.6.3.3.2
Indicates the state of the LED on the feature module.
OBJECT-TYPE    
  INTEGER off(1), on(2), flash(3)  

statusXModule 1.3.6.1.4.1.285.2.6.3.4
OBJECT IDENTIFIER    

statusXModuleTable 1.3.6.1.4.1.285.2.6.3.4.1
This table contains status information about the expansion modules in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    StatusXModuleEntry

statusXModuleEntry 1.3.6.1.4.1.285.2.6.3.4.1.1
Each row in this table describes one expansion module.
OBJECT-TYPE    
  StatusXModuleEntry  

statusXModuleSlotIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.1
The expansion module slot in the switch.
OBJECT-TYPE    
  INTEGER 1..8  

statusXModuleOperStatus 1.3.6.1.4.1.285.2.6.3.4.1.1.2
The operational state of the expansion module.
OBJECT-TYPE    
  INTEGER unknown(1), inService(2), slave(3), failed(4), lost(5), disabledChanged(6), disabledReplaced(7), disabledByManagement(8)  

statusXModuleNoOfSlotsUsed 1.3.6.1.4.1.285.2.6.3.4.1.1.3
Indicates the number of slots occupied by this expansion module.
OBJECT-TYPE    
  INTEGER 1..2  

statusXModuleIPort1SlotIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.4
The slot number for the first iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indicates that the iPort is non-existent.
OBJECT-TYPE    
  INTEGER 0..8  

statusXModuleIPort1RIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.5
The index of the first iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
OBJECT-TYPE    
  INTEGER 0..2  

statusXModuleIPort2SlotIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.6
The slot number for the second iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indicates that the iPort is non-existent.
OBJECT-TYPE    
  INTEGER 0..8  

statusXModuleIPort2RIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.7
The index of the second iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
OBJECT-TYPE    
  INTEGER 0..2  

statusXModuleIPort3SlotIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.8
The slot number for the third iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indicates that the iPort is non-existent.
OBJECT-TYPE    
  INTEGER 0..8  

statusXModuleIPort3RIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.9
The index of the third iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
OBJECT-TYPE    
  INTEGER 0..2  

statusXModuleIPort4SlotIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.10
The slot number for the fourth iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indicates that the iPort is non-existent.
OBJECT-TYPE    
  INTEGER 0..8  

statusXModuleIPort4RIndex 1.3.6.1.4.1.285.2.6.3.4.1.1.11
The index of the fourth iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
OBJECT-TYPE    
  INTEGER 0..2  

statusEPort 1.3.6.1.4.1.285.2.6.3.6
OBJECT IDENTIFIER    

statusEPortTable 1.3.6.1.4.1.285.2.6.3.6.1
This table provides status information about the ATM ports on the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    StatusEPortEntry

statusEPortEntry 1.3.6.1.4.1.285.2.6.3.6.1.1
Each row in this table describes one ATM port.
OBJECT-TYPE    
  StatusEPortEntry  

statusEPortIfIndex 1.3.6.1.4.1.285.2.6.3.6.1.1.1
The ifIndex of the ATM port.
OBJECT-TYPE    
  INTEGER  

statusEPortXModuleIndex 1.3.6.1.4.1.285.2.6.3.6.1.1.2
The expansion module on which this ATM port is located.
OBJECT-TYPE    
  INTEGER 1..8  

statusEPortRIndex 1.3.6.1.4.1.285.2.6.3.6.1.1.3
The position within the expansion module of this ATM port.
OBJECT-TYPE    
  INTEGER 1..24  

statusEPortOperStatus 1.3.6.1.4.1.285.2.6.3.6.1.1.4
The operational state of the ATM port.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

statusEPortPhyState 1.3.6.1.4.1.285.2.6.3.6.1.1.5
The state of the ATM port PHY.
OBJECT-TYPE    
  INTEGER offlineDisabled(1), offlineRestart(2), onlineOk(3), onlineTransPhyFault(4), onlineSignalLoss(5), onlineNoRxSync(6), onlineAutoDisable(7), onlineTesting(8)  

statusEPortType 1.3.6.1.4.1.285.2.6.3.6.1.1.6
The ATM port type.
OBJECT-TYPE    
  INTEGER none(1), utp25(2), mmf155(3), utp155(4), mmf622(5), smf155(6), smf622(7), ds3(8), vpTunnel(9)  

statusEPortRxSyncLedState 1.3.6.1.4.1.285.2.6.3.6.1.1.7
The state of the RXSYNC LED at the ATM port.
OBJECT-TYPE    
  INTEGER off(1), on(2), flash(3)  

statusEPortSignalLossLedState 1.3.6.1.4.1.285.2.6.3.6.1.1.8
The state of the SIGLOSS LED at the ATM port.
OBJECT-TYPE    
  INTEGER off(1), on(2), flash(3)  

statusEPortPhyPortIndex 1.3.6.1.4.1.285.2.6.3.6.1.1.9
Index into a physical layer table.
OBJECT-TYPE    
  INTEGER  

statusEPortLoopbackState 1.3.6.1.4.1.285.2.6.3.6.1.1.10
The loopback state of the ATM port.
OBJECT-TYPE    
  INTEGER ok(1), error(2), unknown(3)  

statusEPortLoopbackErrorCode 1.3.6.1.4.1.285.2.6.3.6.1.1.11
Loopback test error information.
OBJECT-TYPE    
  OCTET STRING  

statusEPortIlmiState 1.3.6.1.4.1.285.2.6.3.6.1.1.12
State of the ILMI protocol on the ATM port.
OBJECT-TYPE    
  INTEGER stopped(1), linkFailing(2), establishing(3), configuring(4), retrieving(5), registering(6), verifying(7), cleanUp(8)  

statusEPortAdjInfoTransmissionType 1.3.6.1.4.1.285.2.6.3.6.1.1.13
UNI 2.0 only: Transmission type of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoMediaType 1.3.6.1.4.1.285.2.6.3.6.1.1.14
UNI 3.1 only: The media type of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoIfName 1.3.6.1.4.1.285.2.6.3.6.1.1.15
The ifName from MIB-II of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  DisplayString  

statusEPortAdjInfoSystemIdentifier 1.3.6.1.4.1.285.2.6.3.6.1.1.16
The IEEE MAC address of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

statusEPortAdjInfoMaxVpcs 1.3.6.1.4.1.285.2.6.3.6.1.1.17
The maximum number of VPCs on the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoMaxVccs 1.3.6.1.4.1.285.2.6.3.6.1.1.18
The maximum number of VCC on the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoMaxVpiBits 1.3.6.1.4.1.285.2.6.3.6.1.1.19
The number of bits used in a VPI on the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoMaxVciBits 1.3.6.1.4.1.285.2.6.3.6.1.1.20
The number of bits used in a VCI on the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER  

statusEPortAdjInfoUniType 1.3.6.1.4.1.285.2.6.3.6.1.1.21
The UNI type of the remote ATM port to which the ATM port is connected.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

statusEPortAdjInfoUniVersion 1.3.6.1.4.1.285.2.6.3.6.1.1.22
The UNI version of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER version2point0(1), version3point0(2), version3point1(3), version4point0(4)  

statusEPortAdjInfoDeviceType 1.3.6.1.4.1.285.2.6.3.6.1.1.23
The device type of the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER user(1), node(2)  

statusEPortAdjInfoIlmiVersion 1.3.6.1.4.1.285.2.6.3.6.1.1.24
The ILMI version used by the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

statusEPortAdjInfoNniSigVersion 1.3.6.1.4.1.285.2.6.3.6.1.1.25
The NNI signalling protocol used by the remote ATM port to which this ATM port is connected.
OBJECT-TYPE    
  INTEGER unsupported(1), iisp(2), pnniVersion1point0(3)  

statusEPortAutoconfigMaxVpcs 1.3.6.1.4.1.285.2.6.3.6.1.1.26
The maximum number of VPCs that the connection between this ATM port and its peer will use.
OBJECT-TYPE    
  INTEGER  

statusEPortAutoconfigMaxVccs 1.3.6.1.4.1.285.2.6.3.6.1.1.27
The maximum number of VCCs that the connection between this ATM port and its peer will use.
OBJECT-TYPE    
  INTEGER  

statusEPortAutoconfigMaxVpiBits 1.3.6.1.4.1.285.2.6.3.6.1.1.28
The number of bits used in a VPI on the connection between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER  

statusEPortAutoconfigMaxVciBits 1.3.6.1.4.1.285.2.6.3.6.1.1.29
The number of bits used in a VCI on the connection between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER  

statusEPortAutoconfigUniVersion 1.3.6.1.4.1.285.2.6.3.6.1.1.30
The UNI version used between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER undefined(1), version3point0(2), version3point1(3), version4point0(4)  

statusEPortAutoconfigDeviceType 1.3.6.1.4.1.285.2.6.3.6.1.1.31
The device type of this ATM port used in its communication with its peer.
OBJECT-TYPE    
  INTEGER user(1), node(2)  

statusEPortAutoconfigDerivedInterfaceType 1.3.6.1.4.1.285.2.6.3.6.1.1.32
The UNI/NNI interface type of this ATM port used in its communication with its peer.
OBJECT-TYPE    
  INTEGER undefined(1), publicUni(2), privateUni(3), privateNni(4)  

statusEPortAutoconfigMaxSvpcVpi 1.3.6.1.4.1.285.2.6.3.6.1.1.33
The highest VPI number used for signalled VPCs between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER 0..4096  

statusEPortAutoconfigMaxSvccVpi 1.3.6.1.4.1.285.2.6.3.6.1.1.34
The highest VPI number used for signalled VCCs between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER 0..4096  

statusEPortAutoconfigMinSvccVci 1.3.6.1.4.1.285.2.6.3.6.1.1.35
The lowest VCI number used for signalled VCCs between this ATM port and its peer.
OBJECT-TYPE    
  INTEGER 0..65536  

statusEPortAdjInfoMaxSvpcVpi 1.3.6.1.4.1.285.2.6.3.6.1.1.36
The MaxSvpcVpi value of the remote port.
OBJECT-TYPE    
  INTEGER 0..4096  

statusEPortAdjInfoMaxSvccVpi 1.3.6.1.4.1.285.2.6.3.6.1.1.37
The MaxSvccVpi value of the remote port.
OBJECT-TYPE    
  INTEGER 0..4096  

statusEPortAdjInfoMinSvccVci 1.3.6.1.4.1.285.2.6.3.6.1.1.38
The MinSvccVci value of the remote port.
OBJECT-TYPE    
  INTEGER 0..65536  

statusVpcVcc 1.3.6.1.4.1.285.2.6.3.7
OBJECT IDENTIFIER    

vpcExtensionTable 1.3.6.1.4.1.285.2.6.3.7.1
This table provides information about VPCs in addition to what is found in the ATM MIB.
OBJECT-TYPE    
  SEQUENCE OF  
    VpcExtensionEntry

vpcExtensionEntry 1.3.6.1.4.1.285.2.6.3.7.1.1
Each row in this table describes one VPC.
OBJECT-TYPE    
  VpcExtensionEntry  

vpcExtensionIndex 1.3.6.1.4.1.285.2.6.3.7.1.1.1
An arbitrary integer used to differentiate multiple rows in this table.
OBJECT-TYPE    
  INTEGER  

vpcExtensionVpCrossConnectIndex 1.3.6.1.4.1.285.2.6.3.7.1.1.2
The index of this VPC in the atmVpCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

vpcExtensionOrigAtmAddr 1.3.6.1.4.1.285.2.6.3.7.1.1.3
The ATM address that originated this VPC.
OBJECT-TYPE    
  AtmAddress  

vpcExtensionTermAtmAddr 1.3.6.1.4.1.285.2.6.3.7.1.1.4
The ATM address at which this VPC terminates.
OBJECT-TYPE    
  AtmAddress  

vpcExtensionCapabilities 1.3.6.1.4.1.285.2.6.3.7.1.1.5
Reserved for special capabilities.
OBJECT-TYPE    
  INTEGER  

vccExtensionTable 1.3.6.1.4.1.285.2.6.3.7.2
This table provides information about VCCs in addition to what is found in the ATM MIB.
OBJECT-TYPE    
  SEQUENCE OF  
    VccExtensionEntry

vccExtensionEntry 1.3.6.1.4.1.285.2.6.3.7.2.1
Each row in this table describes one VCC.
OBJECT-TYPE    
  VccExtensionEntry  

vccExtensionIndex 1.3.6.1.4.1.285.2.6.3.7.2.1.1
An arbitrary integer used to differentiate multiple rows in this table.
OBJECT-TYPE    
  INTEGER  

vccExtensionVcCrossConnectIndex 1.3.6.1.4.1.285.2.6.3.7.2.1.2
The index of this VCC in the atmVcCrossConnectTable in the ATM MIB.
OBJECT-TYPE    
  INTEGER  

vccExtensionOrigAtmAddr 1.3.6.1.4.1.285.2.6.3.7.2.1.3
The ATM address that originated this VCC.
OBJECT-TYPE    
  AtmAddress  

vccExtensionTermAtmAddr 1.3.6.1.4.1.285.2.6.3.7.2.1.4
The ATM address at which this VPC terminates.
OBJECT-TYPE    
  AtmAddress  

vccExtensionCapabilities 1.3.6.1.4.1.285.2.6.3.7.2.1.5
Reserved for special capabilities.
OBJECT-TYPE    
  INTEGER  

vccExtensionEarlyPacketDiscard 1.3.6.1.4.1.285.2.6.3.7.2.1.6
Indicates if early packet discard is allowed on this VCC.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statusFatalLog 1.3.6.1.4.1.285.2.6.3.8
OBJECT IDENTIFIER    

statusFatalStatUsed 1.3.6.1.4.1.285.2.6.3.8.1
The number of currently used entries in the FATAL log.
OBJECT-TYPE    
  INTEGER  

statusFatalStatFree 1.3.6.1.4.1.285.2.6.3.8.2
The number of free entries in the FATAL log.
OBJECT-TYPE    
  INTEGER  

statusFatalStatOverflow 1.3.6.1.4.1.285.2.6.3.8.3
Indicates if there has been an overflow in the FATAL log.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

statusFatalStatMaxDumpLength 1.3.6.1.4.1.285.2.6.3.8.4
The maximum number of bytes that can be dumped.
OBJECT-TYPE    
  INTEGER  

statusFatalTable 1.3.6.1.4.1.285.2.6.3.8.5
This table contains the contents of the FATAL log.
OBJECT-TYPE    
  SEQUENCE OF  
    StatusFatalEntry

statusFatalEntry 1.3.6.1.4.1.285.2.6.3.8.5.1
Each row in this table describes one entry in the FATAL log.
OBJECT-TYPE    
  StatusFatalEntry  

statusFatalIndex 1.3.6.1.4.1.285.2.6.3.8.5.1.1
An arbitrary integer used to differentiate multiple rows in the table.
OBJECT-TYPE    
  INTEGER  

statusFatalSerial 1.3.6.1.4.1.285.2.6.3.8.5.1.2
The serial number of this entry.
OBJECT-TYPE    
  INTEGER  

statusFatalTimestamp 1.3.6.1.4.1.285.2.6.3.8.5.1.3
Time when the FATAL error occurred (measured in seconds since 00:00:00 UTC on 1 January 1970).
OBJECT-TYPE    
  INTEGER  

statusFatalTimeString 1.3.6.1.4.1.285.2.6.3.8.5.1.4
Time when the FATAL error occurred (as a string giving the UTC time and date).
OBJECT-TYPE    
  DisplayString  

statusFatalSource 1.3.6.1.4.1.285.2.6.3.8.5.1.5
Source file name of version of the software that generated the FATAL error.
OBJECT-TYPE    
  DisplayString  

statusFatalLine 1.3.6.1.4.1.285.2.6.3.8.5.1.6
The line number of the source code instruction that generated the FATAL error.
OBJECT-TYPE    
  INTEGER  

statusFatalOriginalDumpSize 1.3.6.1.4.1.285.2.6.3.8.5.1.7
The original size of the dumped objects.
OBJECT-TYPE    
  INTEGER  

statusFatalDumpSize 1.3.6.1.4.1.285.2.6.3.8.5.1.8
The actual size of the dumped objects.
OBJECT-TYPE    
  INTEGER  

statusFatalDump 1.3.6.1.4.1.285.2.6.3.8.5.1.9
The dumped objects.
OBJECT-TYPE    
  OCTET STRING  

crossfireAtmStatistics 1.3.6.1.4.1.285.2.6.4
OBJECT IDENTIFIER    

globalInvalidCellRateTrap 1.3.6.1.4.1.285.2.6.4
The rate of invalid cells/second is above the defined threshold.
TRAP-TYPE    
  statsInvalidCellRateState  
  statsInvalidCellRate  
  controlTime  

statisticsGlobal 1.3.6.1.4.1.285.2.6.4.1
OBJECT IDENTIFIER    

statsGlobalCongestionState 1.3.6.1.4.1.285.2.6.4.1.1
The current congestion state within the switch, based on the number of globally discarded cells. Possible values are: normal The cell discard rate is below fhTrapDashboardControlThresholdLow. highDecreasing The cell discard rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The cell discard rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The cell discard rate is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the globalCongestion entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statsGlobalCongestionDiscardCellRate 1.3.6.1.4.1.285.2.6.4.1.2
The rate of globally discarded cells (measured in cells/second), averaged over 10 seconds.
OBJECT-TYPE    
  Gauge  

statsGlobalCongestionDiscardCellCounter 1.3.6.1.4.1.285.2.6.4.1.3
The number of globally discarded cells.
OBJECT-TYPE    
  Counter  

statsGlobalCongestionDiscardCellLatch 1.3.6.1.4.1.285.2.6.4.1.4
Indicates if the cell discard rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statsGlobalCongestionDiscardCellLatchTime 1.3.6.1.4.1.285.2.6.4.1.5
The value of sysUpTime when the system turned statsGlobalCongestionDiscardCellLatch on.
OBJECT-TYPE    
  TimeTicks  

statsInvalidCellRateState 1.3.6.1.4.1.285.2.6.4.1.6
The current invalid cell state within the switch, based on the number of invalid cells received. Possible values are: normal The invalid cell rate is below fhTrapDashboardControlThresholdLow. highDecreasing The invalid cell rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The invalid cell rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The invalid cell rate is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the globalInvalidCellRate entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statsInvalidCellRate 1.3.6.1.4.1.285.2.6.4.1.7
The rate of invalid cells (measured in cells/second), averaged over 10 seconds.
OBJECT-TYPE    
  Gauge  

statsInvalidCellCounter 1.3.6.1.4.1.285.2.6.4.1.8
The number of invalid cells received.
OBJECT-TYPE    
  Counter  

statsInvalidCellLatch 1.3.6.1.4.1.285.2.6.4.1.9
Indicates if the invalid cell rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statsInvalidCellLatchTime 1.3.6.1.4.1.285.2.6.4.1.10
The value of sysUpTime when the system turned statsInvalidCellLatch on.
OBJECT-TYPE    
  TimeTicks  

statisticsCpuPort 1.3.6.1.4.1.285.2.6.4.2
OBJECT IDENTIFIER    

statsCpuPortCongestionState 1.3.6.1.4.1.285.2.6.4.2.1
The current congestion state of the switch processor queue, based on the number of cells in the switch processor queue. Possible values are: normal The queue length is below fhTrapDashboardControlThresholdLow. highDecreasing The queue length is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The queue length is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The queue length is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the cpuPortCongestion entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statsCpuPortDiscardCellRate 1.3.6.1.4.1.285.2.6.4.2.2
The rate of discarded cells per second destined for the switch processor queue (measured in cells/second), averaged over 10 seconds.
OBJECT-TYPE    
  Gauge  

statsCpuPortDiscardCellCounter 1.3.6.1.4.1.285.2.6.4.2.3
The number of cells, destined for the switch processor queue, that have been discarded.
OBJECT-TYPE    
  Counter  

statsCpuPortDiscardCellLatch 1.3.6.1.4.1.285.2.6.4.2.4
Indicates if the switch processor queue cell discard rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statsCpuPortDiscardCellLatchTime 1.3.6.1.4.1.285.2.6.4.2.5
The value of sysUpTime when the system turned statsCpuPortDiscardCellLatch on.
OBJECT-TYPE    
  TimeTicks  

statisticsEPort 1.3.6.1.4.1.285.2.6.4.3
OBJECT IDENTIFIER    

statsEportTable 1.3.6.1.4.1.285.2.6.4.3.1
This table contains ATM port HEC error statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    StatsEportEntry

statsEportEntry 1.3.6.1.4.1.285.2.6.4.3.1.1
Each row in this table describes one ATM port.
OBJECT-TYPE    
  StatsEportEntry  

statsEPortIfIndex 1.3.6.1.4.1.285.2.6.4.3.1.1.1
The ifIndex of the ATM port.
OBJECT-TYPE    
  INTEGER  

statsEPortHecErrorRateConditionState 1.3.6.1.4.1.285.2.6.4.3.1.1.2
The current HEC error state within the switch, based on the rate of cells with HEC errors. Possible values are: normal The HEC error cell rate is below fhTrapDashboardControlThresholdLow. highDecreasing The HEC error cell rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The HEC error cell rate is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The HEC cell rate is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the ePortHecErrorRate entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statsEPortRxHecErrorCellRate 1.3.6.1.4.1.285.2.6.4.3.1.1.3
The rate of cells with HEC errors received on this ATM port (measured in cells/second), averaged over 10 seconds.
OBJECT-TYPE    
  Gauge  

statsEPortRxHecErrorCellCounter 1.3.6.1.4.1.285.2.6.4.3.1.1.4
The number of cells with HEC errors received on this ATM port.
OBJECT-TYPE    
  Counter  

statsEPortRxHecErrorCellLatch 1.3.6.1.4.1.285.2.6.4.3.1.1.5
Indicates if the HEC error cell rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

statsEPortRxHecErrorCellLatchTime 1.3.6.1.4.1.285.2.6.4.3.1.1.6
The value of sysUpTime when the system turned statsEPortRxHecErrorCellLatch on.
OBJECT-TYPE    
  TimeTicks  

statisticsIPort 1.3.6.1.4.1.285.2.6.4.4
OBJECT IDENTIFIER    

statsIPortTable 1.3.6.1.4.1.285.2.6.4.4.1
This table contains statistics for the Core Access Points (iPorts) in the switch).
OBJECT-TYPE    
  SEQUENCE OF  
    StatsIPortEntry

statsIPortEntry 1.3.6.1.4.1.285.2.6.4.4.1.1
Each row in this table describes one iPort.
OBJECT-TYPE    
  StatsIPortEntry  

statsIPortSlotIndex 1.3.6.1.4.1.285.2.6.4.4.1.1.1
The number of the expansion module to which the iPort is connected.
OBJECT-TYPE    
  INTEGER 1..8  

statsIPortRIndex 1.3.6.1.4.1.285.2.6.4.4.1.1.2
The number of the iPort within the expansion module.
OBJECT-TYPE    
  INTEGER 1..2  

statsIPortRxCellRate 1.3.6.1.4.1.285.2.6.4.4.1.1.3
The rate of cells received on this iPort (measured in cells/second), averaged over 5 samples, sampled every 2 seconds, computed as 0.8*previous+0.2*current.
OBJECT-TYPE    
  Gauge  

statsIPortTxCellRate 1.3.6.1.4.1.285.2.6.4.4.1.1.4
The rate of cells transmitted on this iPort (measured in cells/second), averaged over 5 samples, sampled every 2 seconds, computed as 0.8*previous+0.2*current.
OBJECT-TYPE    
  Gauge  

statsIPortTxParityErrorCellCounter 1.3.6.1.4.1.285.2.6.4.4.1.1.5
The number of cells with memory parity error that were read from the switch core cell buffer.
OBJECT-TYPE    
  Counter  

statsQueueCongestionTable 1.3.6.1.4.1.285.2.6.4.4.2
This table contains congestion information for each queue attached to each Core Access Point (iPort).
OBJECT-TYPE    
  SEQUENCE OF  
    StatsQueueCongestionEntry

statsQueueCongestionEntry 1.3.6.1.4.1.285.2.6.4.4.2.1
Each row in this table describes one queue on one iPort.
OBJECT-TYPE    
  StatsQueueCongestionEntry  

statsQueueCongestionSlotIndex 1.3.6.1.4.1.285.2.6.4.4.2.1.1
The number of the expansion module to which the iPort is connected.
OBJECT-TYPE    
  INTEGER 1..8  

statsQueueCongestionIPortRIndex 1.3.6.1.4.1.285.2.6.4.4.2.1.2
The number of the iPort within the expansion module.
OBJECT-TYPE    
  INTEGER 1..2  

statsQueueCongestionQueueIndex 1.3.6.1.4.1.285.2.6.4.4.2.1.3
The queue priority.
OBJECT-TYPE    
  INTEGER 1..4  

statsQueueCongestionConditionState 1.3.6.1.4.1.285.2.6.4.4.2.1.4
The current congestion state on the iPort queue, based on the length of the queue. Possible values are: normal The queue length is below fhTrapDashboardControlThresholdLow. highDecreasing The queue length is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is decreasing. normalIncreasing The queue length is between fhTrapDashboardControlThresholdLow and fhTrapDashboardControlThresholdHigh, and it is increasing. high The queue length is above fhTrapDashboardControlThresholdHigh. The references to fhTrapDashboardControlThresholdLow/High refer to the iPortCongestion entry in fhTrapDashboardControlTable.
OBJECT-TYPE    
  INTEGER normal(1), highDecreasing(2), normalIncreasing(3), high(4)  

statsQueueCongestionCellsInQueueGauge 1.3.6.1.4.1.285.2.6.4.4.2.1.5
The current length of the iPort queue.
OBJECT-TYPE    
  Gauge  

statsQueueCongestionCellsInQueueLatch 1.3.6.1.4.1.285.2.6.4.4.2.1.6
Indicates if the iPort queue length has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
OBJECT-TYPE    
  INTEGER  

statsQueueCongestionCellsInQueueLatchTime 1.3.6.1.4.1.285.2.6.4.4.2.1.7
The value of sysUpTime when the system turned statsQueueCongestionCellsInQueueLatch on.
OBJECT-TYPE    
  TimeTicks  

crossfireAtmTrapControl 1.3.6.1.4.1.285.2.6.5
OBJECT IDENTIFIER    

cpuPortCongestionTrap 1.3.6.1.4.1.285.2.6.5
The number of cells in the switch processor queue is above the defined threshold.
TRAP-TYPE    
  statsCpuPortCongestionState  
  controlTime  

fhTrapFrequencyCntrlFrequency 1.3.6.1.4.1.285.2.6.5.1
Controls how frequently a threshold-exceeded trap may be generated. This object is the maximum number of times each trap may be sent per minute.
OBJECT-TYPE    
  INTEGER 1..60  

fhTrapFrequencyCntrlMaxTraps 1.3.6.1.4.1.285.2.6.5.2
The maximum number of times each threshold-exceeded trap may be generated during one threshold-exceeded incident if fhTrapDashboardControlFrequencyMode is upToMax.
OBJECT-TYPE    
  INTEGER 1..1000  

fhTrapDashboardControlTable 1.3.6.1.4.1.285.2.6.5.3
This table contains the thresholds that trigger various traps.
OBJECT-TYPE    
  SEQUENCE OF  
    FhTrapDashboardControlEntry

fhTrapDashboardControlEntry 1.3.6.1.4.1.285.2.6.5.3.1
Each row in this table describes one trap type.
OBJECT-TYPE    
  FhTrapDashboardControlEntry  

fhTrapDashboardControlTrapTypeIndex 1.3.6.1.4.1.285.2.6.5.3.1.1
The trap type.
OBJECT-TYPE    
  INTEGER globalCongestion(1), globalInvalidCellRate(2), cpuPortCongestion(3), iPortCongestion(4), ePortHecErrorRate(5), temperatureWarning(6), psuMonitor(7), fanMonitor(8)  

fhTrapDashboardControlFrequencyMode 1.3.6.1.4.1.285.2.6.5.3.1.2
Controls the number of times this trap may be generated. The legal values are: oneShot Generate a trap once for each threshold-exceeded incident. forever Generate traps at the rate specified in fhTrapFrequencyCntrlFrequency. upToMax Generate traps at the rate specified in fhTrapFrequencyCntrlFrequency, but do not generate more than fhTrapFrequencyCntrlMaxTraps traps for each threshold-exceeded incident.
OBJECT-TYPE    
  INTEGER oneShot(1), forever(2), upToMax(3)  

fhTrapDashboardControlThresholdLow 1.3.6.1.4.1.285.2.6.5.3.1.3
The low threshold hysteresis value. When the measured value drops below this number, trap generation stops. This value must be smaller than or equal to fhTrapDashboardControlThresholdHigh.
OBJECT-TYPE    
  INTEGER  

fhTrapDashboardControlThresholdHigh 1.3.6.1.4.1.285.2.6.5.3.1.4
The high threshold hysteresis value. When the measured value rises above this number, trap generation starts. This value must be greater than or equal to fhTrapDashboardControlThresholdLow.
OBJECT-TYPE    
  INTEGER  

fhTrapDashboardControlSamplingInterval 1.3.6.1.4.1.285.2.6.5.3.1.5
Sampling interval (in seconds) for the value that is to be compared with the thresholds.
OBJECT-TYPE    
  INTEGER 1..65535  

fhTrapDashboardControlNoSamples 1.3.6.1.4.1.285.2.6.5.3.1.6
The number of samples in a running average. A value of 1 indicates no running average.
OBJECT-TYPE    
  INTEGER 1..32  

temperatureCriticalTrapThreshold 1.3.6.1.4.1.285.2.6.5.4
If the temperature in the switch rises above this value (in degrees Celsius, the temperatureCriticalTrap trap is generated, and the switch is shut down.
OBJECT-TYPE    
  INTEGER  

crossfireAtmTest 1.3.6.1.4.1.285.2.6.6
OBJECT IDENTIFIER    

queueCongestionTrap 1.3.6.1.4.1.285.2.6.6
The number of cells in an iPort queue is above the defined threshold.
TRAP-TYPE    
  statsQueueCongestionSlotIndex  
  statsQueueCongestionIPortRIndex  
  statsQueueCongestionQueueIndex  
  statsQueueCongestionConditionState  
  controlTime  

crossfirexlx 1.3.6.1.4.1.285.2.6.7
OBJECT IDENTIFIER    

ePortHecErrorRateTrap 1.3.6.1.4.1.285.2.6.7
The rate of HEC error cells/second is above the defined threshold.
TRAP-TYPE    
  statsEPortIfIndex  
  statusEPortXModuleIndex  
  statusEPortRIndex  
  statsEPortHecErrorRateConditionState  
  statsEPortRxHecErrorCellRate  
  controlTime  

ocCNNI 1.3.6.1.4.1.285.2.6.7.3
OBJECT IDENTIFIER    

ocCNNIMonSimple 1.3.6.1.4.1.285.2.6.7.3.1
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIMonSEntry

ocCNNIMonSEntry 1.3.6.1.4.1.285.2.6.7.3.1.1
OBJECT-TYPE    
  OcCNNIMonSEntry  

ocCNNIRoutingTableChanged 1.3.6.1.4.1.285.2.6.7.3.1.1.1
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNINeighborTableChanged 1.3.6.1.4.1.285.2.6.7.3.1.1.2
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNILineStatus 1.3.6.1.4.1.285.2.6.7.3.1.1.3
OBJECT-TYPE    
  OCTET STRING  

ocCNNIMACAddress 1.3.6.1.4.1.285.2.6.7.3.1.1.4
OBJECT-TYPE    
  OCTET STRING  

ocCNNIMode 1.3.6.1.4.1.285.2.6.7.3.1.1.5
OBJECT-TYPE    
  INTEGER off(1), on(2)  

ocCNNIProtocolVersion 1.3.6.1.4.1.285.2.6.7.3.1.1.6
OBJECT-TYPE    
  INTEGER  

ocCNNIApplID 1.3.6.1.4.1.285.2.6.7.3.1.1.7
OBJECT-TYPE    
  INTEGER  

ocCNNIMonTables 1.3.6.1.4.1.285.2.6.7.3.2
OBJECT IDENTIFIER    

ocCNNIRoutingTable 1.3.6.1.4.1.285.2.6.7.3.2.1
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIRoutingTableEntry

ocCNNIRoutingTableEntry 1.3.6.1.4.1.285.2.6.7.3.2.1.1
OBJECT-TYPE    
  OcCNNIRoutingTableEntry  

ocCNNIAddress 1.3.6.1.4.1.285.2.6.7.3.2.1.1.1
OBJECT-TYPE    
  OCTET STRING  

ocCNNIRoutingTableData 1.3.6.1.4.1.285.2.6.7.3.2.1.1.2
OBJECT-TYPE    
  OCTET STRING  

ocCNNIAddressAlias 1.3.6.1.4.1.285.2.6.7.3.2.1.1.3
OBJECT-TYPE    
  OCTET STRING  

ocCNNINeighborTable 1.3.6.1.4.1.285.2.6.7.3.2.2
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNINeighborTableEntry

ocCNNINeighborTableEntry 1.3.6.1.4.1.285.2.6.7.3.2.2.1
OBJECT-TYPE    
  OcCNNINeighborTableEntry  

ocCNNIPort 1.3.6.1.4.1.285.2.6.7.3.2.2.1.1
OBJECT-TYPE    
  INTEGER  

ocCNNINeighborTableData 1.3.6.1.4.1.285.2.6.7.3.2.2.1.2
OBJECT-TYPE    
  OCTET STRING  

ocCNNITrapClientTable 1.3.6.1.4.1.285.2.6.7.3.2.3
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNITrapClientTableEntry

ocCNNITrapClientTableEntry 1.3.6.1.4.1.285.2.6.7.3.2.3.1
OBJECT-TYPE    
  OcCNNITrapClientTableEntry  

ocCNNITrapClientIndex 1.3.6.1.4.1.285.2.6.7.3.2.3.1.1
OBJECT-TYPE    
  OCTET STRING  

ocCNNITrapClientAddress 1.3.6.1.4.1.285.2.6.7.3.2.3.1.2
OBJECT-TYPE    
  IpAddress  

ocCNNITrapClientCommName 1.3.6.1.4.1.285.2.6.7.3.2.3.1.3
OBJECT-TYPE    
  OCTET STRING  

ocCNNIConfig 1.3.6.1.4.1.285.2.6.7.3.3
OBJECT IDENTIFIER    

ocCNNIConfigMethod 1.3.6.1.4.1.285.2.6.7.3.3.1
An alorithm used by CNNI. First (0) means that the SETUP frame which arrives first is accepted, all consecutive are discarded. Best (1) means that we delay the decision of accepting a SETUP frame for some time and accept the one that carries the smallest cost.
OBJECT-TYPE    
  INTEGER first(0), best(1)  

ocCNNIConfigAlgorithm 1.3.6.1.4.1.285.2.6.7.3.3.2
An algorithm that is used to determine the cost of a SETUP frame if ocCNNIConfigMethod equals Best (1).
OBJECT-TYPE    
  INTEGER  

ocCNNIPortConfig 1.3.6.1.4.1.285.2.6.7.3.4
A table of parameter information for CNNI ports.
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIPortEntry

ocCNNIPortEntry 1.3.6.1.4.1.285.2.6.7.3.4.1
An entry in the table, containing information about parameters for CNNI ports.
OBJECT-TYPE    
  OcCNNIPortEntry  

ocCNNIPortProtocol 1.3.6.1.4.1.285.2.6.7.3.4.1.1
Routing protocol used on an ATM port.
OBJECT-TYPE    
  INTEGER cnni(0), pnni(1), none(2)  

ocCNNIPortBorder 1.3.6.1.4.1.285.2.6.7.3.4.1.2
Definition of a role this port has in CNNI cloud. no (0) means that it is connected to another device running CNNI. yes (1) means it is connected to a non-CNNI device. no (0) requires that atmfAtmLayerUniVersion equals NNI(6).
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNIPortAutoreroute 1.3.6.1.4.1.285.2.6.7.3.4.1.3
An indication if all calls coming from this port should be automatically rerouted by CNNI if a path they are traversing becomes invalid. Refers to UNI ports.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNIPortReroute 1.3.6.1.4.1.285.2.6.7.3.4.1.4
An indication if a port should be considered an alternate path for automatic rerouting. Refers to ports that have ocCNNIPortProtocol set to cnni (0).
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNIPortAssign 1.3.6.1.4.1.285.2.6.7.3.4.1.5
Defines if CNNI should assign VPI/VCI identifiers for this port. For CNNI link (ocCNNIPortProtocol set to cnni (0)) only one end should have it set to yes(1).
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ocCNNIGlobalStats 1.3.6.1.4.1.285.2.6.7.3.5
OBJECT IDENTIFIER    

ocCNNIGlobalStatsTotal 1.3.6.1.4.1.285.2.6.7.3.5.1
Total number of active switched connection established by CNNI.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsCreated 1.3.6.1.4.1.285.2.6.7.3.5.2
Number of connections set up by CNNI that are in CREATED phase.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsOneWay 1.3.6.1.4.1.285.2.6.7.3.5.3
Number of connections set up by CNNI that are in ONE WAY phase.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsConnected 1.3.6.1.4.1.285.2.6.7.3.5.4
Number of connections set up by CNNI that are in CONNECTED phase.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsBrokenLeaf 1.3.6.1.4.1.285.2.6.7.3.5.5
Number of connections set up by CNNI that are in BROKEN LEAF phase.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsBrokenRoot 1.3.6.1.4.1.285.2.6.7.3.5.6
Number of connections set up by CNNI that are in BROKEN ROOT phase.
OBJECT-TYPE    
  Counter  

ocCNNIGlobalStatsRerouteWaiting 1.3.6.1.4.1.285.2.6.7.3.5.7
Number of connections set up by CNNI that are in REROUTE WAITING phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStats 1.3.6.1.4.1.285.2.6.7.3.6
A table of CNNI statistics information for an ATM address.
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIAddrStatsEntry

ocCNNIAddrStatsEntry 1.3.6.1.4.1.285.2.6.7.3.6.1
An entry in a table of CNNI statistics information for an ATM address.
OBJECT-TYPE    
  OcCNNIAddrStatsEntry  

ocCNNIAddrStatsToTotal 1.3.6.1.4.1.285.2.6.7.3.6.1.1
Total number of active switched connection established by CNNI to this address.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToCreated 1.3.6.1.4.1.285.2.6.7.3.6.1.2
Number of active switched connection set up by CNNI to this address that are in CREATED phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToOneWay 1.3.6.1.4.1.285.2.6.7.3.6.1.3
Number of active switched connection set up by CNNI to this address that are in ONE WAY phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToConnected 1.3.6.1.4.1.285.2.6.7.3.6.1.4
Number of active switched connection set up by CNNI to this address that are in CONNECTED phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToBrokenLeaf 1.3.6.1.4.1.285.2.6.7.3.6.1.5
Number of active switched connection set up by CNNI to this address that are in BROKEN LEAF phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToBrokenRoot 1.3.6.1.4.1.285.2.6.7.3.6.1.6
Number of active switched connection set up by CNNI to this address that are in BROKEN ROOT phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsToRerouteWaiting 1.3.6.1.4.1.285.2.6.7.3.6.1.7
Number of active switched connection set up by CNNI to this address that are in REROUTE WAITING phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromTotal 1.3.6.1.4.1.285.2.6.7.3.6.1.8
Total number of active switched connection set up by CNNI from this address.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromCreated 1.3.6.1.4.1.285.2.6.7.3.6.1.9
Number of active switched connection set up by CNNI from this address that are in CREATED phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromOneWay 1.3.6.1.4.1.285.2.6.7.3.6.1.10
Number of active switched connection set up by CNNI from this address that are in ONE WAY phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromConnected 1.3.6.1.4.1.285.2.6.7.3.6.1.11
Number of active switched connection set up by CNNI from this address that are in CONNECTED phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromBrokenLeaf 1.3.6.1.4.1.285.2.6.7.3.6.1.12
Number of active switched connection set up by CNNI from this address that are in BROKEN LEAF phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromBrokenRoot 1.3.6.1.4.1.285.2.6.7.3.6.1.13
Number of active switched connection set up by CNNI from this address that are in BROKEN ROOT phase.
OBJECT-TYPE    
  Counter  

ocCNNIAddrStatsFromRerouteWaiting 1.3.6.1.4.1.285.2.6.7.3.6.1.14
Number of active switched connection set up by CNNI from this address that are in REROUTE WAITING phase.
OBJECT-TYPE    
  Counter  

ocCNNIAliasTable 1.3.6.1.4.1.285.2.6.7.3.7
A table of symbolic names assigned to ATM addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIAliasTableEntry

ocCNNIAliasTableEntry 1.3.6.1.4.1.285.2.6.7.3.7.1
An entry in a table of symbolic names assigned to ATM addresses.
OBJECT-TYPE    
  OcCNNIAliasTableEntry  

ocCNNIAlias 1.3.6.1.4.1.285.2.6.7.3.7.1.1
A symbolic name assigned to an ATM address. It can be 15 characters long max.
OBJECT-TYPE    
  OCTET STRING  

ocCNNIConnDB 1.3.6.1.4.1.285.2.6.7.3.8
OBJECT IDENTIFIER    

ocCNNIFilterAssignID 1.3.6.1.4.1.285.2.6.7.3.8.1
First empty slot in CNNI filter table. The NMS station should obtain it first, before setting filter parameters.
OBJECT-TYPE    
  INTEGER  

ocCNNIFilterTable 1.3.6.1.4.1.285.2.6.7.3.8.2
Table of filters defined for tracing signalling messages.
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNIFilterTableEntry

ocCNNIFilterTableEntry 1.3.6.1.4.1.285.2.6.7.3.8.2.1
Entry in a table of filters for tracing signalling messages.
OBJECT-TYPE    
  OcCNNIFilterTableEntry  

ocCNNIFilterID 1.3.6.1.4.1.285.2.6.7.3.8.2.1.1
Unique identificator of a filter.
OBJECT-TYPE    
  INTEGER  

ocCNNIFilterTypePres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.2
Indicates if a connection type field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterTypeData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.3
Connection type field in the filter definition. This field has any meaning only if ocCNNIFilterTypePres is set to present (1).
OBJECT-TYPE    
  INTEGER pointtopoint(0), pointtomulitpoint(1)  

ocCNNIFilterInPortPres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.4
Indicates if a incoming port field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterInPortData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.5
Incoming port field in the filter definition. This field has any meaning only if ocCNNIFilterInPortPres is set to present (1).
OBJECT-TYPE    
  INTEGER  

ocCNNIFilterOutPortPres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.6
Indicates if a outgoing port field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterOutPortData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.7
Outgoing port field in the filter definition. This field has any meaning only if ocCNNIFilterOutPortPres is set to present (1).
OBJECT-TYPE    
  INTEGER  

ocCNNIFilterCgPtyPres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.8
Indicates if a calling party field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterCgPtyData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.9
Calling party field in the filter definition. This field has any meaning only if ocCNNIFilterCgPtyPres is set to present (1).
OBJECT-TYPE    
  OCTET STRING  

ocCNNIFilterCdPtyPres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.10
Indicates if a called party field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterCdPtyData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.11
Called party field in the filter definition. This field has any meaning only if ocCNNIFilterCdPtyPres is set to present (1).
OBJECT-TYPE    
  OCTET STRING  

ocCNNIFilterStatePres 1.3.6.1.4.1.285.2.6.7.3.8.2.1.12
Indicates if a connection phase field is present in the filter definition.
OBJECT-TYPE    
  INTEGER notpresent(0), present(1)  

ocCNNIFilterStateData 1.3.6.1.4.1.285.2.6.7.3.8.2.1.13
Connection state field in the filter definition. This field has any meaning only if ocCNNIFilterStatePres is set to present (1).
OBJECT-TYPE    
  INTEGER created(0), oneway(1), connected(2), brokenroot(3), brokenleaf(4), reroutewaiting(5)  

ocCNNISessTable 1.3.6.1.4.1.285.2.6.7.3.8.3
Table containing info about session data. In order to read from this table one must first define a filter using ocCNNIFilterTable.
OBJECT-TYPE    
  SEQUENCE OF  
    OcCNNISessTableEntry

ocCNNISessTableEntry 1.3.6.1.4.1.285.2.6.7.3.8.3.1
An entry in a table containing info about session data.
OBJECT-TYPE    
  OcCNNISessTableEntry  

ocCNNISessID 1.3.6.1.4.1.285.2.6.7.3.8.3.1.1
A unique session identifier.
OBJECT-TYPE    
  INTEGER  

ocCNNISessDataType 1.3.6.1.4.1.285.2.6.7.3.8.3.1.2
Connection type: pointtopoint (0) or pointtomultipoint (1).
OBJECT-TYPE    
  INTEGER pointtopoint(0), pointtomulitpoint(1)  

ocCNNISessDataInPort 1.3.6.1.4.1.285.2.6.7.3.8.3.1.3
Incoming port (a port from which we received a SETUP frame that was accepted).
OBJECT-TYPE    
  INTEGER  

ocCNNISessDataOutPort 1.3.6.1.4.1.285.2.6.7.3.8.3.1.4
Outgoing port (a port to which we sent a SETUP frame that was accepted).
OBJECT-TYPE    
  INTEGER  

ocCNNISessDataCgPty 1.3.6.1.4.1.285.2.6.7.3.8.3.1.5
ATM address of a calling party.
OBJECT-TYPE    
  OCTET STRING  

ocCNNISessDataCdPty 1.3.6.1.4.1.285.2.6.7.3.8.3.1.6
ATM address of a called party.
OBJECT-TYPE    
  OCTET STRING  

ocCNNISessDataState 1.3.6.1.4.1.285.2.6.7.3.8.3.1.7
State of the connection.
OBJECT-TYPE    
  INTEGER created(0), oneway(1), connected(2), brokenroot(3), brokenleaf(4), reroutewaiting(5)  

ocDsx3 1.3.6.1.4.1.285.2.6.7.4
OBJECT IDENTIFIER    

ocDsx3MIBObjs 1.3.6.1.4.1.285.2.6.7.4.1
OBJECT IDENTIFIER    

ocDsx3ConfigTable 1.3.6.1.4.1.285.2.6.7.4.1.1
The Olicom extensions to the DS3/E3 Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    OcDsx3ConfigEntry

ocDsx3ConfigEntry 1.3.6.1.4.1.285.2.6.7.4.1.1.1
An entry in the DS3/E3 Configuration table.
OBJECT-TYPE    
  OcDsx3ConfigEntry  

ocDsx3Xor55 1.3.6.1.4.1.285.2.6.7.4.1.1.1.1
This tests the FIFO data path between the the ATM layer, Atomizer and PHY/TC layer. Normally this option is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ocDsx3Scrambling 1.3.6.1.4.1.285.2.6.7.4.1.1.1.2
Scrambles the cell payload using a self synchronizing scrambler with an XX^43+1. Required by ITU-T in I.432 Not used on ATMF UNI DS3 interface, but may be required in future.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ocDsx3Delineation 1.3.6.1.4.1.285.2.6.7.4.1.1.1.3
Provides ATM cell delineation based on the cell HEC byte or by the PLCP direct based mapping of ATM cells into the DS3 payload envelopes. Normally PLCP delineation is used.
OBJECT-TYPE    
  INTEGER hec(1), plcp(2)  

ocDsx3HcsPassThru 1.3.6.1.4.1.285.2.6.7.4.1.1.1.4
Allows cells with detected HCS errors to pass to the receive FIFO. This is ussually disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ocDsx3Ext8kRefClk 1.3.6.1.4.1.285.2.6.7.4.1.1.1.5
The option selects an internal frame reference clock. When the interface is used to source line timing, this reference clock should be active. On an XLX one of the four ports of an adapter may be used as the master supplier or source of the clock, and the other 3 can reference the master's clock as slaves.
OBJECT-TYPE    
  INTEGER enabled-master(1), disabled(2), slave(3)  

ocDsx3ShortCable 1.3.6.1.4.1.285.2.6.7.4.1.1.1.6
If the coaxial cables attached to the DS3 interface are 225 feet or less, select the short. If length is greater than 225 feet do not select short. This selection changes the DS3 Line build-out characteristics. Do not use cables longer than 450 feet. Cable type should be good quality RG-59/U. This is 75 ohm coax. Do not us 50 ohm coax, such as that used for Ethernet applications.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ocDsx3CntHcsCorrectedErrs 1.3.6.1.4.1.285.2.6.7.4.1.1.1.7
If this parameter is enabled(1) the CPPM HCS counter will count the number of correctable header checksum errors. If disabled(1) the CPPM HCS counter will count the number of uncorrectable HCS errors.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ocDsx3SuniPdhTable 1.3.6.1.4.1.285.2.6.7.4.1.2
The Olicom extensions to the DS3/E3 Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    OcDsx3SuniPdhEntry

ocDsx3SuniPdhEntry 1.3.6.1.4.1.285.2.6.7.4.1.2.1
An entry in the DS3/E3 Configuration table.
OBJECT-TYPE    
  OcDsx3SuniPdhEntry  

ocDsx3SuniPmonLcv 1.3.6.1.4.1.285.2.6.7.4.1.2.1.1
Represents the number of Line Code Violations since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniPmonFerr 1.3.6.1.4.1.285.2.6.7.4.1.2.1.2
Represents the number of DS3 F and M bit errors since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniPmonExzs 1.3.6.1.4.1.285.2.6.7.4.1.2.1.3
Represents the number of summed excessivce zeros that occured during the previous accumulation period. One or more excessive zeros occurrence withan an 85 bit DS3 information block is counterd as one summed excessive zero.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniPmonPeec 1.3.6.1.4.1.285.2.6.7.4.1.2.1.4
Represents the number of DS3 P bits errors that have been detected since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniPmonPpec 1.3.6.1.4.1.285.2.6.7.4.1.2.1.5
Represents the number of DS3 path parity errprs that have been detected since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniPmonFebeErr 1.3.6.1.4.1.285.2.6.7.4.1.2.1.6
Represents the number of DS3 far end block errors that have been detected since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniB1Bip8Err 1.3.6.1.4.1.285.2.6.7.4.1.2.1.7
Represents the number of B1 Bit-Interleaved Parity (BIP8) errors since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmFrameErr 1.3.6.1.4.1.285.2.6.7.4.1.2.1.8
Represents the number of PLCP frame errors that have occurred since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmFebeErr 1.3.6.1.4.1.285.2.6.7.4.1.2.1.9
Represent the number of PLCP Far End Block Errors since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmHcsErr 1.3.6.1.4.1.285.2.6.7.4.1.2.1.10
If the ocDsx3CntHcsCorrectedErrs is enabled this counter represents the number of correctable Header Checksum errors that have occurred since last polled. If the ocDsx3CntHcsCorrectedErrs is disabled this counter represents the number of uncorrectable Header Checksum errors that have occurred since last polled.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmRcvCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.11
Represents the number of cells received by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmXmtCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.12
Represents the number of cells transmitted by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmIdleCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.13
Represents the number of received idle cells by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmMegaRcvCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.14
Represents the millions of cells received by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmMegaXmtCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.15
Represents the millions of cells transmitted by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

ocDsx3SuniCppmMegaIdleCells 1.3.6.1.4.1.285.2.6.7.4.1.2.1.16
Represents the millions of received idle cells by the PHY device since power on.
OBJECT-TYPE    
  INTEGER  

iPortTxParityErrorTrap 1.3.6.1.4.1.285.2.6.8
The rate of cell buffer memory parity errors is above the defined threshold.
TRAP-TYPE    
  statsIPortSlotIndex  
  statsIPortRIndex  
  statsIPortTxParityErrorCellCounter  

ePortAutoDisabled 1.3.6.1.4.1.285.2.6.9
An ATM port has been automatically disabled due to a hardware failure.
TRAP-TYPE    
  statusEPortIfIndex  
  controlTime  

featureModuleStatusChange 1.3.6.1.4.1.285.2.6.10
Informs the management station that an expected feature module is not present, the system will operate without a feature module.
TRAP-TYPE    
  statusFeatureModuleOperStatus  
  controlTime  

xModuleStatusChange 1.3.6.1.4.1.285.2.6.11
Informs the management station about a change in the state of an expansion module, e.g. when its state changes to failed, lost, disabledChanged, or disabledReplaced.
TRAP-TYPE    
  statusXModuleSlotIndex  
  statusXModuleOperStatus  
  controlTime  

temperatureWarningTrap 1.3.6.1.4.1.285.2.6.12
The temerature in the switch is above the defined threshold.
TRAP-TYPE    
  statusCurrentTemperatureConditionState  
  statusCurrentTemperatureGauge  
  controlTime  

fanFailureTrap 1.3.6.1.4.1.285.2.6.13
The fan has stopped working.
TRAP-TYPE    
  statusFanOperStatus  
  statusCurrentTemperatureGauge  
  controlTime  

psuFailureTrap 1.3.6.1.4.1.285.2.6.14
A power supply has stopped working.
TRAP-TYPE    
  statusPsuIndex  
  statusPsuOperStatus  
  controlTime  

temperatureCriticalTrap 1.3.6.1.4.1.285.2.6.15
The temperature has reached an unacceptable level. The switch will be shut down.
TRAP-TYPE    
  statusCurrentTemperatureConditionState  
  statusCurrentTemperatureGauge  
  controlTime  

oamFlowNoResponseTrap 1.3.6.1.4.1.285.2.6.16
An F4 or F5 OAM cell was not returned within 5 seconds.
TRAP-TYPE    
  ifIndex  
  controlTime  

Defined Objects

AtmAddress  
OCTET STRING SIZE(20)    

InfoProcessorModuleHwOptionEntry  
SEQUENCE    
  INTEGER as infoProcessorModuleHwOptionNo  
  DisplayString as infoProcessorModuleHwOption  

InfoFeatureModuleHwOptionEntry  
SEQUENCE    
  INTEGER as infoFeatureModuleHwOptionNo  
  DisplayString as infoFeatureModuleHwOption  

InfoXModuleEntry  
SEQUENCE    
  INTEGER as infoXModuleSlotIndex  
  DisplayString as infoXModuleHwProductId  
  DisplayString as infoXModuleHwVersion  
  DisplayString as infoXModuleHwEcoLevel  
  DisplayString as infoXModuleHwSerialNumber  

InfoXModuleHwOptionEntry  
SEQUENCE    
  INTEGER as infoXModuleHwOptionSlotIndex  
  INTEGER as infoXModuleHwOptionNo  
  DisplayString as infoXModuleHwOption  

ConfigTmServiceClassMapEntry  
SEQUENCE    
  INTEGER as configTmServiceClassMapServiceClass  
  INTEGER as configTmServiceClassMapSchedulingQueue  

TrafficDescriptorEntry  
SEQUENCE    
  INTEGER as trafficDescriptorIndex  
  INTEGER as trafficDescriptorCreationMode  
  INTEGER as trafficDescriptorServiceClass  
  INTEGER as trafficDescriptorPcr01  
  INTEGER as trafficDescriptorPcr0  
  INTEGER as trafficDescriptorScr01  
  INTEGER as trafficDescriptorScr0  
  INTEGER as trafficDescriptorMbs01  
  INTEGER as trafficDescriptorMbs0  
  INTEGER as trafficDescriptorTaggingFlag  
  INTEGER as trafficDescriptorFrameDiscardFlag  
  INTEGER as trafficDescriptorBestEffortFlag  
  INTEGER as trafficDescriptorMcr  
  INTEGER as trafficDescriptorAbrIcr  
  INTEGER as trafficDescriptorAbrTbe  
  INTEGER as trafficDescriptorAbrFrtt  
  INTEGER as trafficDescriptorAbrRif  
  INTEGER as trafficDescriptorAbrRdf  
  INTEGER as trafficDescriptorAbrNrm  
  INTEGER as trafficDescriptorAbrTrm  
  INTEGER as trafficDescriptorAbrCdf  
  INTEGER as trafficDescriptorAbrAdtf  
  INTEGER as trafficDescriptorTrafficType  
  INTEGER as trafficDescriptorRowStatus  
  INTEGER as trafficDescriptorCtd  
  INTEGER as trafficDescriptorCdv  
  INTEGER as trafficDescriptorLogClr  

ConfigIlmiServiceRegistryEntry  
SEQUENCE    
  INTEGER as configIlmiServiceRegistryAddressIndex  
  OBJECT IDENTIFIER as configIlmiServiceRegistryServiceId  
  AtmAddress as configIlmiServiceRegistryAtmAddress  
  OCTET STRING as configIlmiServiceRegistryParm1  
  INTEGER as configIlmiServiceRegistryRowStatus  

ConfigXModuleEntry  
SEQUENCE    
  INTEGER as configXModuleSlotIndex  
  INTEGER as configXModuleAdminStatus  

ConfigEPortEntry  
SEQUENCE    
  INTEGER as configEPortIfIndex  
  INTEGER as configEPortHwConfigTxClocking  
  INTEGER as configEPortHwConfigSonetSdh  
  INTEGER as configEPortUseCommonEPortConfig  
  INTEGER as configEPortLoopback  
  INTEGER as configEPortIlmiConfigIlmiAdminStatus  
  INTEGER as configEPortIlmiConfigAddrRegistrationAdminStatus  
  INTEGER as configEPortIlmiConfigMaxVpcs  
  INTEGER as configEPortIlmiConfigMaxVccs  
  INTEGER as configEPortIlmiConfigMaxVpiBits  
  INTEGER as configEPortIlmiConfigMaxVciBits  
  INTEGER as configEPortIlmiConfigUniType  
  INTEGER as configEPortIlmiConfigUniVersion  
  INTEGER as configEPortIlmiConfigDeviceType  
  INTEGER as configEPortIlmiConfigIlmiVersion  
  INTEGER as configEPortIlmiConfigNniSigVersion  
  INTEGER as configEPortIlmiConfigSignallingVpi  
  INTEGER as configEPortIlmiConfigSignallingVci  
  INTEGER as configEPortIlmiConfigIlmiVpi  
  INTEGER as configEPortIlmiConfigIlmiVci  
  INTEGER as configEPortIlmiConfigLecsVpi  
  INTEGER as configEPortIlmiConfigLecsVci  
  INTEGER as configEPortIlmiConfigPnniVpi  
  INTEGER as configEPortIlmiConfigPnniVci  
  INTEGER as configEPortAbrBandwidthAllocation  
  INTEGER as configEPortVbrRtBandwidthAllocation  
  INTEGER as configEPortVbrNrtBandwidthAllocation  
  INTEGER as configEPortCbrBandwidthAllocation  
  INTEGER as configEPortLinkDelay  
  INTEGER as configEPortTransientPhyOffTime  
  INTEGER as configEPortTransientPhyWindowTime  
  INTEGER as configEPortTransientPhyDisconnectCount  
  INTEGER as configEPortTransientPhyDisconnectTimer  
  INTEGER as configEPortBandwidthLimit  
  INTEGER as configEPortDefaultSigVersion  
  INTEGER as configEPortIlmiConfigMaxSvpcVpi  
  INTEGER as configEPortIlmiConfigMaxSvccVpi  
  INTEGER as configEPortIlmiConfigMinSvccVci  

ConfigCommonIPortQueueEntry  
SEQUENCE    
  INTEGER as configCommonIPortQueueIndex  
  INTEGER as configCommonIPortEfciTaggingAdminStatus  
  INTEGER as configCommonIPortClpDiscardAdminStatus  
  INTEGER as configCommonIPortEfciTaggingThreshold  
  INTEGER as configCommonIPortClpDiscardThreshold  
  INTEGER as configCommonIPortQueueSize  
  INTEGER as configCommonIPortLogClr  
  INTEGER as configCommonIPortCdv  

ConfigPriorityBufferEntry  
SEQUENCE    
  INTEGER as configPriorityBufferIndex  
  INTEGER as configPriorityBufferSize  

ConfigIPortScratchPadQueueEntry  
SEQUENCE    
  INTEGER as configIPortScratchPadQueueQueueIndex  
  INTEGER as configIPortScratchPadQueueEfciTaggingAdminStatus  
  INTEGER as configIPortScratchPadQueueClpDiscardAdminStatus  
  INTEGER as configIPortScratchPadQueueEfciTaggingThreshold  
  INTEGER as configIPortScratchPadQueueClpDiscardThreshold  
  INTEGER as configIPortScratchPadQueueSize  
  INTEGER as configIPortScratchPadQueueLogClr  
  INTEGER as configIPortScratchPadQueueCdv  

ConfigIPortEntry  
SEQUENCE    
  INTEGER as configIPortSlotIndex  
  INTEGER as configIPortRIndex  
  INTEGER as configIPortUseCommonIPortConfig  

ConfigIPortQueueEntry  
SEQUENCE    
  INTEGER as configIPortQueueSlotIndex  
  INTEGER as configIPortQueueRIndex  
  INTEGER as configIPortQueueQueueIndex  
  INTEGER as configIPortQueueEfciTaggingAdminStatus  
  INTEGER as configIPortQueueClpDiscardAdminStatus  
  INTEGER as configIPortQueueEfciTaggingThreshold  
  INTEGER as configIPortQueueClpDiscardThreshold  
  INTEGER as configIPortQueueSize  
  INTEGER as configIPortQueueLogClr  
  INTEGER as configIPortQueueCdv  

PvpSetupEntry  
SEQUENCE    
  INTEGER as pvpSetupIndex  
  INTEGER as pvpSetupApplication  
  INTEGER as pvpSetupLowEPortIndex  
  INTEGER as pvpSetupLowVpi  
  INTEGER as pvpSetupHighEPortIndex  
  INTEGER as pvpSetupHighVpi  
  INTEGER as pvpSetupVpCrossConnectIndex  
  INTEGER as pvpSetupL2HTrafficDescriptorIndex  
  INTEGER as pvpSetupH2LTrafficDescriptorIndex  
  INTEGER as pvpSetupRowStatus  

PvcSetupEntry  
SEQUENCE    
  INTEGER as pvcSetupIndex  
  INTEGER as pvcSetupApplication  
  INTEGER as pvcSetupLowEPortIndex  
  INTEGER as pvcSetupLowVpi  
  INTEGER as pvcSetupLowVci  
  INTEGER as pvcSetupHighEPortIndex  
  INTEGER as pvcSetupHighVpi  
  INTEGER as pvcSetupHighVci  
  INTEGER as pvcSetupVcCrossConnectIndex  
  INTEGER as pvcSetupL2HTrafficDescriptorIndex  
  INTEGER as pvcSetupH2LTrafficDescriptorIndex  
  INTEGER as pvcSetupRowStatus  

SvpSetupEntry  
SEQUENCE    
  INTEGER as svpSetupIndex  
  INTEGER as svpSetupApplication  
  INTEGER as svpSetupEPortIndex  
  INTEGER as svpSetupPreferredVpi  
  AtmAddress as svpSetupTermAtmAddr  
  INTEGER as svpSetupVpCrossConnectIndex  
  INTEGER as svpSetupTxTrafficDescriptorIndex  
  INTEGER as svpSetupRxTrafficDescriptorIndex  
  INTEGER as svpSetupRowStatus  

SvcSetupEntry  
SEQUENCE    
  INTEGER as svcSetupIndex  
  INTEGER as svcSetupApplication  
  AtmAddress as svcSetupTermAtmAddr  
  INTEGER as svcSetupVcCrossConnectIndex  
  INTEGER as svcSetupTxTrafficDescriptorIndex  
  INTEGER as svcSetupRxTrafficDescriptorIndex  
  INTEGER as svcSetupRowStatus  

ConfigNextHopRoutingEntry  
SEQUENCE    
  INTEGER as configNextHopRoutingIndex  
  AtmAddress as configNextHopRoutingAtmAddress  
  INTEGER as configNextHopRoutingAddressLength  
  INTEGER as configNextHopRoutingEPort  
  INTEGER as configNextHopRoutingSignallingType  
  INTEGER as configNextHopRoutingRowStatus  

AtmIpArpEntry  
SEQUENCE    
  INTEGER as atmIpArpServerIndex  
  IpAddress as atmIpArpIpAddress  
  AtmAddress as atmIpArpAtmAddress  
  INTEGER as atmIpArpType  

ConfigIpArpServerEntry  
SEQUENCE    
  INTEGER as configIpArpServerIndex  
  AtmAddress as configIpArpServerAtmAddressSpec  
  AtmAddress as configIpArpServerAtmAddressMask  
  AtmAddress as configIpArpServerAtmAddressActual  
  IpAddress as configIpArpServerIpSubnetAddress  
  IpAddress as configIpArpServerIpSubnetMask  
  INTEGER as configIpArpServerAdminStatus  
  INTEGER as configIpArpServerOperStatus  
  INTEGER as configIpArpServerRowStatus  

QosClassEntry  
SEQUENCE    
  INTEGER as qosClassClass  
  INTEGER as qosClassCtd  
  INTEGER as qosClassCdv  
  INTEGER as qosClassLogClr  

IfTestEntry  
SEQUENCE    
  INTEGER as ifTestId  
  INTEGER as ifTestStatus  
  OBJECT IDENTIFIER as ifTestType  
  INTEGER as ifTestResult  
  OBJECT IDENTIFIER as ifTestCode  
  OCTET STRING as ifTestOwner SIZE(0..255)  

StatusPsuStatusEntry  
SEQUENCE    
  INTEGER as statusPsuIndex  
  INTEGER as statusPsuOperStatus  

StatusXModuleEntry  
SEQUENCE    
  INTEGER as statusXModuleSlotIndex  
  INTEGER as statusXModuleOperStatus  
  INTEGER as statusXModuleNoOfSlotsUsed  
  INTEGER as statusXModuleIPort1SlotIndex  
  INTEGER as statusXModuleIPort1RIndex  
  INTEGER as statusXModuleIPort2SlotIndex  
  INTEGER as statusXModuleIPort2RIndex  
  INTEGER as statusXModuleIPort3SlotIndex  
  INTEGER as statusXModuleIPort3RIndex  
  INTEGER as statusXModuleIPort4SlotIndex  
  INTEGER as statusXModuleIPort4RIndex  

StatusEPortEntry  
SEQUENCE    
  INTEGER as statusEPortIfIndex  
  INTEGER as statusEPortXModuleIndex  
  INTEGER as statusEPortRIndex  
  INTEGER as statusEPortOperStatus  
  INTEGER as statusEPortPhyState  
  INTEGER as statusEPortType  
  INTEGER as statusEPortRxSyncLedState  
  INTEGER as statusEPortSignalLossLedState  
  INTEGER as statusEPortPhyPortIndex  
  INTEGER as statusEPortLoopbackState  
  OCTET STRING as statusEPortLoopbackErrorCode  
  INTEGER as statusEPortIlmiState  
  INTEGER as statusEPortAdjInfoTransmissionType  
  INTEGER as statusEPortAdjInfoMediaType  
  OCTET STRING as statusEPortAdjInfoIfName  
  OCTET STRING as statusEPortAdjInfoSystemIdentifier  
  INTEGER as statusEPortAdjInfoMaxVpcs  
  INTEGER as statusEPortAdjInfoMaxVccs  
  INTEGER as statusEPortAdjInfoMaxVpiBits  
  INTEGER as statusEPortAdjInfoMaxVciBits  
  INTEGER as statusEPortAdjInfoUniType  
  INTEGER as statusEPortAdjInfoUniVersion  
  INTEGER as statusEPortAdjInfoDeviceType  
  INTEGER as statusEPortAdjInfoIlmiVersion  
  INTEGER as statusEPortAdjInfoNniSigVersion  
  INTEGER as statusEPortAutoconfigMaxVpcs  
  INTEGER as statusEPortAutoconfigMaxVccs  
  INTEGER as statusEPortAutoconfigMaxVpiBits  
  INTEGER as statusEPortAutoconfigMaxVciBits  
  INTEGER as statusEPortAutoconfigUniVersion  
  INTEGER as statusEPortAutoconfigDeviceType  
  INTEGER as statusEPortAutoconfigDerivedInterfaceType  
  INTEGER as statusEPortAutoconfigMaxSvpcVpi  
  INTEGER as statusEPortAutoconfigMaxSvccVpi  
  INTEGER as statusEPortAutoconfigMinSvccVci  
  INTEGER as statusEPortAdjInfoMaxSvpcVpi  
  INTEGER as statusEPortAdjInfoMaxSvccVpi  
  INTEGER as statusEPortAdjInfoMinSvccVci  

VpcExtensionEntry  
SEQUENCE    
  INTEGER as vpcExtensionIndex  
  INTEGER as vpcExtensionVpCrossConnectIndex  
  AtmAddress as vpcExtensionOrigAtmAddr  
  AtmAddress as vpcExtensionTermAtmAddr  
  INTEGER as vpcExtensionCapabilities  

VccExtensionEntry  
SEQUENCE    
  INTEGER as vccExtensionIndex  
  INTEGER as vccExtensionVcCrossConnectIndex  
  AtmAddress as vccExtensionOrigAtmAddr  
  AtmAddress as vccExtensionTermAtmAddr  
  INTEGER as vccExtensionCapabilities  
  INTEGER as vccExtensionEarlyPacketDiscard  

StatusFatalEntry  
SEQUENCE    
  INTEGER as statusFatalIndex  
  INTEGER as statusFatalSerial  
  INTEGER as statusFatalTimestamp  
  DisplayString as statusFatalTimeString  
  DisplayString as statusFatalSource  
  INTEGER as statusFatalLine  
  INTEGER as statusFatalOriginalDumpSize  
  INTEGER as statusFatalDumpSize  
  OCTET STRING as statusFatalDump  

StatsEportEntry  
SEQUENCE    
  INTEGER as statsEPortIfIndex  
  INTEGER as statsEPortHecErrorRateConditionState  
  Gauge as statsEPortRxHecErrorCellRate  
  Counter as statsEPortRxHecErrorCellCounter  
  INTEGER as statsEPortRxHecErrorCellLatch  
  TimeTicks as statsEPortRxHecErrorCellLatchTime  

StatsIPortEntry  
SEQUENCE    
  INTEGER as statsIPortSlotIndex  
  INTEGER as statsIPortRIndex  
  Gauge as statsIPortRxCellRate  
  Gauge as statsIPortTxCellRate  
  Counter as statsIPortTxParityErrorCellCounter  

StatsQueueCongestionEntry  
SEQUENCE    
  INTEGER as statsQueueCongestionSlotIndex  
  INTEGER as statsQueueCongestionIPortRIndex  
  INTEGER as statsQueueCongestionQueueIndex  
  INTEGER as statsQueueCongestionConditionState  
  Gauge as statsQueueCongestionCellsInQueueGauge  
  INTEGER as statsQueueCongestionCellsInQueueLatch  
  TimeTicks as statsQueueCongestionCellsInQueueLatchTime  

FhTrapDashboardControlEntry  
SEQUENCE    
  INTEGER as fhTrapDashboardControlTrapTypeIndex  
  INTEGER as fhTrapDashboardControlFrequencyMode  
  INTEGER as fhTrapDashboardControlThresholdLow  
  INTEGER as fhTrapDashboardControlThresholdHigh  
  INTEGER as fhTrapDashboardControlSamplingInterval  
  INTEGER as fhTrapDashboardControlNoSamples  

OcCNNIMonSEntry  
SEQUENCE    
  INTEGER as ocCNNIRoutingTableChanged  
  INTEGER as ocCNNINeighborTableChanged  
  OCTET STRING as ocCNNILineStatus  
  OCTET STRING as ocCNNIMACAddress  
  INTEGER as ocCNNIMode  
  INTEGER as ocCNNIProtocolVersion  
  INTEGER as ocCNNIApplID  

OcCNNIRoutingTableEntry  
SEQUENCE    
  OCTET STRING as ocCNNIAddress  
  OCTET STRING as ocCNNIRoutingTableData  
  OCTET STRING as ocCNNIAddressAlias  

OcCNNINeighborTableEntry  
SEQUENCE    
  INTEGER as ocCNNIPort  
  OCTET STRING as ocCNNINeighborTableData  

OcCNNITrapClientTableEntry  
SEQUENCE    
  OCTET STRING as ocCNNITrapClientIndex  
  IpAddress as ocCNNITrapClientAddress  
  OCTET STRING as ocCNNITrapClientCommName  

OcCNNIPortEntry  
SEQUENCE    
  INTEGER as ocCNNIPortProtocol  
  INTEGER as ocCNNIPortBorder  
  INTEGER as ocCNNIPortAutoreroute  
  INTEGER as ocCNNIPortReroute  
  INTEGER as ocCNNIPortAssign  

OcCNNIAddrStatsEntry  
SEQUENCE    
  Counter as ocCNNIAddrStatsToTotal  
  Counter as ocCNNIAddrStatsToCreated  
  Counter as ocCNNIAddrStatsToOneWay  
  Counter as ocCNNIAddrStatsToConnected  
  Counter as ocCNNIAddrStatsToBrokenLeaf  
  Counter as ocCNNIAddrStatsToBrokenRoot  
  Counter as ocCNNIAddrStatsToRerouteWaiting  
  Counter as ocCNNIAddrStatsFromTotal  
  Counter as ocCNNIAddrStatsFromCreated  
  Counter as ocCNNIAddrStatsFromOneWay  
  Counter as ocCNNIAddrStatsFromConnected  
  Counter as ocCNNIAddrStatsFromBrokenLeaf  
  Counter as ocCNNIAddrStatsFromBrokenRoot  
  Counter as ocCNNIAddrStatsFromRerouteWaiting  

OcCNNIAliasTableEntry  
SEQUENCE    
  OCTET STRING as ocCNNIAlias  

OcCNNIFilterTableEntry  
SEQUENCE    
  INTEGER as ocCNNIFilterID  
  INTEGER as ocCNNIFilterTypePres  
  INTEGER as ocCNNIFilterTypeData  
  INTEGER as ocCNNIFilterInPortPres  
  INTEGER as ocCNNIFilterInPortData  
  INTEGER as ocCNNIFilterOutPortPres  
  INTEGER as ocCNNIFilterOutPortData  
  INTEGER as ocCNNIFilterCgPtyPres  
  OCTET STRING as ocCNNIFilterCgPtyData  
  INTEGER as ocCNNIFilterCdPtyPres  
  OCTET STRING as ocCNNIFilterCdPtyData  
  INTEGER as ocCNNIFilterStatePres  
  INTEGER as ocCNNIFilterStateData  

OcCNNISessTableEntry  
SEQUENCE    
  INTEGER as ocCNNISessID  
  INTEGER as ocCNNISessDataType  
  INTEGER as ocCNNISessDataInPort  
  INTEGER as ocCNNISessDataOutPort  
  OCTET STRING as ocCNNISessDataCgPty  
  OCTET STRING as ocCNNISessDataCdPty  
  INTEGER as ocCNNISessDataState  

OcDsx3ConfigEntry  
SEQUENCE    
  INTEGER as ocDsx3Xor55  
  INTEGER as ocDsx3Scrambling  
  INTEGER as ocDsx3Delineation  
  INTEGER as ocDsx3HcsPassThru  
  INTEGER as ocDsx3Ext8kRefClk  
  INTEGER as ocDsx3ShortCable  
  INTEGER as ocDsx3CntHcsCorrectedErrs  

OcDsx3SuniPdhEntry  
SEQUENCE    
  INTEGER as ocDsx3SuniPmonLcv  
  INTEGER as ocDsx3SuniPmonFerr  
  INTEGER as ocDsx3SuniPmonExzs  
  INTEGER as ocDsx3SuniPmonPeec  
  INTEGER as ocDsx3SuniPmonPpec  
  INTEGER as ocDsx3SuniPmonFebeErr  
  INTEGER as ocDsx3SuniB1Bip8Err  
  INTEGER as ocDsx3SuniCppmFrameErr  
  INTEGER as ocDsx3SuniCppmFebeErr  
  INTEGER as ocDsx3SuniCppmHcsErr  
  INTEGER as ocDsx3SuniCppmRcvCells  
  INTEGER as ocDsx3SuniCppmXmtCells  
  INTEGER as ocDsx3SuniCppmIdleCells  
  INTEGER as ocDsx3SuniCppmMegaRcvCells  
  INTEGER as ocDsx3SuniCppmMegaXmtCells  
  INTEGER as ocDsx3SuniCppmMegaIdleCells