RAD-DS3-MIB

File: RAD-DS3-MIB.mib (28060 bytes)

Imported modules

RAD-MIB SNMPv2-SMI

Imported symbols

diverseIfWanGen OBJECT-TYPE Integer32
Gauge32

Defined Objects

ds3Interface 1.3.6.1.4.1.164.3.1.6.3
OBJECT IDENTIFIER    

prtDs3PerfHistory 1.3.6.1.4.1.164.3.1.6.3.1
OBJECT IDENTIFIER    

prtSDs3IfTable 1.3.6.1.4.1.164.3.1.6.3.1.1
The DS3 interface table.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtDs3IfEntry

prtDs3IfEntry 1.3.6.1.4.1.164.3.1.6.3.1.1.1
An entry in the DS3 interface table.
OBJECT-TYPE    
  PrtDs3IfEntry  

prtDs3IfTimeElapsed 1.3.6.1.4.1.164.3.1.6.3.1.1.1.1
The number of seconds that have elapsed since the beginning of the near end current error- measurement period.
OBJECT-TYPE    
  Integer32 0..899  

prtDs3IfValidIntervals 1.3.6.1.4.1.164.3.1.6.3.1.1.1.2
The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online.
OBJECT-TYPE    
  Integer32 0..96  

prtDs3CurrentTable 1.3.6.1.4.1.164.3.1.6.3.1.2
The DS3 Current table.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtDs3CurrentEntry

prtDs3CurrentEntry 1.3.6.1.4.1.164.3.1.6.3.1.2.1
An entry in the DS3 Current table.
OBJECT-TYPE    
  PrtDs3CurrentEntry  

prtDs3CurrentLOS 1.3.6.1.4.1.164.3.1.6.3.1.2.1.1
The counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentOOF 1.3.6.1.4.1.164.3.1.6.3.1.2.1.2
The counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentLOC 1.3.6.1.4.1.164.3.1.6.3.1.2.1.3
The counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentAIS 1.3.6.1.4.1.164.3.1.6.3.1.2.1.4
The counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentRDI 1.3.6.1.4.1.164.3.1.6.3.1.2.1.5
The counter associated with the number of RDI seconds, encountered by a DS3 interface.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentUAS 1.3.6.1.4.1.164.3.1.6.3.1.2.1.6
The counter associated with the number of UAS, encountered by a SONET interface.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentBIP 1.3.6.1.4.1.164.3.1.6.3.1.2.1.7
The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentFEBE 1.3.6.1.4.1.164.3.1.6.3.1.2.1.8
The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentSLM 1.3.6.1.4.1.164.3.1.6.3.1.2.1.9
The counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentSES 1.3.6.1.4.1.164.3.1.6.3.1.2.1.10
The counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentES 1.3.6.1.4.1.164.3.1.6.3.1.2.1.11
The number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentBitParity 1.3.6.1.4.1.164.3.1.6.3.1.2.1.12
Bit Parity Error counter. Relevant to T3 only.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentPlcpLOF 1.3.6.1.4.1.164.3.1.6.3.1.2.1.13
The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configuration If frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentPlcpRAI 1.3.6.1.4.1.164.3.1.6.3.1.2.1.14
Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentPlcpBIP 1.3.6.1.4.1.164.3.1.6.3.1.2.1.15
The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentPlcpFEBE 1.3.6.1.4.1.164.3.1.6.3.1.2.1.16
The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentBPV 1.3.6.1.4.1.164.3.1.6.3.1.2.1.17
Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentLCE 1.3.6.1.4.1.164.3.1.6.3.1.2.1.18
Number of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.
OBJECT-TYPE    
  Gauge32  

prtDs3CurrentStatus 1.3.6.1.4.1.164.3.1.6.3.1.2.1.19
The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

prtDs3IntervalTable 1.3.6.1.4.1.164.3.1.6.3.1.3
The DS3 Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtDs3IntervalEntry

prtDs3IntervalEntry 1.3.6.1.4.1.164.3.1.6.3.1.3.1
An entry in the DS3 Interval table.
OBJECT-TYPE    
  PrtDs3IntervalEntry  

prtDs3IntervalNumber 1.3.6.1.4.1.164.3.1.6.3.1.3.1.1
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
OBJECT-TYPE    
  Integer32 1..96  

prtDs3IntervalLOS 1.3.6.1.4.1.164.3.1.6.3.1.3.1.2
The counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalOOF 1.3.6.1.4.1.164.3.1.6.3.1.3.1.3
The counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalLOC 1.3.6.1.4.1.164.3.1.6.3.1.3.1.4
The counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalAIS 1.3.6.1.4.1.164.3.1.6.3.1.3.1.5
The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalRDI 1.3.6.1.4.1.164.3.1.6.3.1.3.1.6
The counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalUAS 1.3.6.1.4.1.164.3.1.6.3.1.3.1.7
The counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalBIP 1.3.6.1.4.1.164.3.1.6.3.1.3.1.8
The counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalFEBE 1.3.6.1.4.1.164.3.1.6.3.1.3.1.9
The counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalSLM 1.3.6.1.4.1.164.3.1.6.3.1.3.1.10
The counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalSES 1.3.6.1.4.1.164.3.1.6.3.1.3.1.11
The counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalES 1.3.6.1.4.1.164.3.1.6.3.1.3.1.12
The number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalBitParity 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13
Bit Parity Error counter. Relevant to T3 only.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalPlcpLOF 1.3.6.1.4.1.164.3.1.6.3.1.3.1.14
The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configuration If frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalPlcpRAI 1.3.6.1.4.1.164.3.1.6.3.1.3.1.15
Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalPlcpBIP 1.3.6.1.4.1.164.3.1.6.3.1.3.1.16
The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalPlcpFEBE 1.3.6.1.4.1.164.3.1.6.3.1.3.1.17
The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalBPV 1.3.6.1.4.1.164.3.1.6.3.1.3.1.18
Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalLCE 1.3.6.1.4.1.164.3.1.6.3.1.3.1.19
Number of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.
OBJECT-TYPE    
  Gauge32  

prtDs3IntervalStatus 1.3.6.1.4.1.164.3.1.6.3.1.3.1.20
The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

prtDs3TotalTable 1.3.6.1.4.1.164.3.1.6.3.1.4
A list of Total entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtDs3TotalEntry

prtDs3TotalEntry 1.3.6.1.4.1.164.3.1.6.3.1.4.1
An entry of Total table.
OBJECT-TYPE    
  PrtDs3TotalEntry  

prtDs3TotalUAS 1.3.6.1.4.1.164.3.1.6.3.1.4.1.6
Number of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  Gauge32  

prtDs3TotalBPV 1.3.6.1.4.1.164.3.1.6.3.1.4.1.17
Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  Gauge32  

prtDs3TotalLCE 1.3.6.1.4.1.164.3.1.6.3.1.4.1.18
Number of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  Gauge32  

prtDs3TotalSES 1.3.6.1.4.1.164.3.1.6.3.1.4.1.19
Number of SES (Severely Errored Seconds) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
OBJECT-TYPE    
  Gauge32  

dsx3XConfigTable 1.3.6.1.4.1.164.3.1.6.3.2
An extension to the DS3 Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx3XConfigEntry

dsx3XConfigEntry 1.3.6.1.4.1.164.3.1.6.3.2.1
An entry containing additional configuration parameters.
OBJECT-TYPE    
  Dsx3XConfigEntry  

dsx3AisEnable 1.3.6.1.4.1.164.3.1.6.3.2.1.1
Enable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected.
OBJECT-TYPE    
  INTEGER notApplicable(1), disable(2), enable(3)  

Defined Objects

PrtDs3IfEntry  
SEQUENCE    
  Integer32 as prtDs3IfTimeElapsed  
  Integer32 as prtDs3IfValidIntervals  

PrtDs3CurrentEntry  
SEQUENCE    
  Gauge32 as prtDs3CurrentLOS  
  Gauge32 as prtDs3CurrentOOF  
  Gauge32 as prtDs3CurrentLOC  
  Gauge32 as prtDs3CurrentAIS  
  Gauge32 as prtDs3CurrentRDI  
  Gauge32 as prtDs3CurrentUAS  
  Gauge32 as prtDs3CurrentBIP  
  Gauge32 as prtDs3CurrentFEBE  
  Gauge32 as prtDs3CurrentSLM  
  Gauge32 as prtDs3CurrentSES  
  Gauge32 as prtDs3CurrentES  
  Gauge32 as prtDs3CurrentBitParity  
  Gauge32 as prtDs3CurrentPlcpLOF  
  Gauge32 as prtDs3CurrentPlcpRAI  
  Gauge32 as prtDs3CurrentPlcpBIP  
  Gauge32 as prtDs3CurrentPlcpFEBE  
  Gauge32 as prtDs3CurrentBPV  
  Gauge32 as prtDs3CurrentLCE  
  OCTET STRING as prtDs3CurrentStatus  

PrtDs3IntervalEntry  
SEQUENCE    
  Integer32 as prtDs3IntervalNumber  
  Gauge32 as prtDs3IntervalLOS  
  Gauge32 as prtDs3IntervalOOF  
  Gauge32 as prtDs3IntervalLOC  
  Gauge32 as prtDs3IntervalAIS  
  Gauge32 as prtDs3IntervalRDI  
  Gauge32 as prtDs3IntervalUAS  
  Gauge32 as prtDs3IntervalBIP  
  Gauge32 as prtDs3IntervalFEBE  
  Gauge32 as prtDs3IntervalSLM  
  Gauge32 as prtDs3IntervalSES  
  Gauge32 as prtDs3IntervalES  
  Gauge32 as prtDs3IntervalBitParity  
  Gauge32 as prtDs3IntervalPlcpLOF  
  Gauge32 as prtDs3IntervalPlcpRAI  
  Gauge32 as prtDs3IntervalPlcpBIP  
  Gauge32 as prtDs3IntervalPlcpFEBE  
  Gauge32 as prtDs3IntervalBPV  
  Gauge32 as prtDs3IntervalLCE  
  OCTET STRING as prtDs3IntervalStatus  

PrtDs3TotalEntry  
SEQUENCE    
  Gauge32 as prtDs3TotalUAS  
  Gauge32 as prtDs3TotalBPV  
  Gauge32 as prtDs3TotalLCE  
  Gauge32 as prtDs3TotalSES  

Dsx3XConfigEntry  
SEQUENCE    
  INTEGER as dsx3AisEnable