RAD-HDLC-MIB

File: RAD-HDLC-MIB.mib (61432 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RAD-MIB

Imported symbols

OBJECT-TYPE NOTIFICATION-TYPE Integer32
Gauge32 IpAddress DisplayString
RowStatus InterfaceIndex diverseIfWanGen
fileName

Defined Objects

hdlcMibObjects 1.3.6.1.4.1.164.3.1.6.5
OBJECT IDENTIFIER    

hdlcTable 1.3.6.1.4.1.164.3.1.6.5.1
The HDLC configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HdlcEntry

hdlcEntry 1.3.6.1.4.1.164.3.1.6.5.1.1
Defines the contents of each line in the RAD HDLC Table.
OBJECT-TYPE    
  HdlcEntry  

hdlcProtocol 1.3.6.1.4.1.164.3.1.6.5.1.1.1
The HDLC protocol type V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530
OBJECT-TYPE    
  INTEGER notApplicable(1), v35(2), x21(3), rs530(4)  

hdlcRateResolution 1.3.6.1.4.1.164.3.1.6.5.1.1.2
The baud rate of the internal clock.
OBJECT-TYPE    
  INTEGER notApplicable(1), nx56Kbps(2), nx64Kbps(3)  

hdlcTxClockSource 1.3.6.1.4.1.164.3.1.6.5.1.1.3
The baud rate of the internal clock.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

hdlcTerminalMode 1.3.6.1.4.1.164.3.1.6.5.1.1.4
.
OBJECT-TYPE    
  INTEGER dce(1), dte(2)  

hdlcLoopbackState 1.3.6.1.4.1.164.3.1.6.5.1.1.5
internal - All data coming from the network port is looped back external - All data comming from the line is looped back.
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3), disable(4)  

hdlcTxClockPolarity 1.3.6.1.4.1.164.3.1.6.5.1.1.6
normal - The transmitted data is sampled at the middle of bit time inverse - The transmitted data is sampled at the end of the bit time (high data rate/long cable).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

hdlcFlowControl 1.3.6.1.4.1.164.3.1.6.5.1.1.7
Enable/Disable the CTS/RTS flow control signals.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdlcLineRate 1.3.6.1.4.1.164.3.1.6.5.1.1.8
The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128 and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52.
OBJECT-TYPE    
  Integer32  

hdlcRxClockMode 1.3.6.1.4.1.164.3.1.6.5.1.1.9
.
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3)  

hdlcLOF 1.3.6.1.4.1.164.3.1.6.5.1.1.10
Total number of seconds the port is in Loss Of Frame state.
OBJECT-TYPE    
  Gauge32  

hdlcRxClockPolarity 1.3.6.1.4.1.164.3.1.6.5.1.1.11
normal - The received data is sampled at the middle of bit time inverse - The received data is sampled at the end of the bit time (high data rate/long cable).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

hdlcPerformance 1.3.6.1.4.1.164.3.1.6.5.2
OBJECT IDENTIFIER    

hdlcCurrentTable 1.3.6.1.4.1.164.3.1.6.5.2.1
The HDLC Current table.
OBJECT-TYPE    
  SEQUENCE OF  
    HdlcCurrentEntry

hdlcCurrentEntry 1.3.6.1.4.1.164.3.1.6.5.2.1.1
An entry in the HDLC Current table.
OBJECT-TYPE    
  HdlcCurrentEntry  

hdlcCurrentIfIndex 1.3.6.1.4.1.164.3.1.6.5.2.1.1.1
The index of the HDLC interface. It may be ifIndex.
OBJECT-TYPE    
  Integer32  

hdlcCurrentStatus 1.3.6.1.4.1.164.3.1.6.5.2.1.1.2
The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

hdlcCurrentLOF 1.3.6.1.4.1.164.3.1.6.5.2.1.1.3
The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcCurrentInFrames 1.3.6.1.4.1.164.3.1.6.5.2.1.1.4
The counter associated with the number of received frames, encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcCurrentInErrors 1.3.6.1.4.1.164.3.1.6.5.2.1.1.5
The counter associated with the number of Errored received frames, encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcCurrentOutFrames 1.3.6.1.4.1.164.3.1.6.5.2.1.1.6
The counter associated with the number of transmitted frames, encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcCurrentAbortedFrames 1.3.6.1.4.1.164.3.1.6.5.2.1.1.7
The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcCurrentLengthError 1.3.6.1.4.1.164.3.1.6.5.2.1.1.8
The counter associated with the number of received frames with length error, encountered by the HDLC interface in the current 15 minute interval.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalTable 1.3.6.1.4.1.164.3.1.6.5.2.2
The HDLC Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    HdlcIntervalEntry

hdlcIntervalEntry 1.3.6.1.4.1.164.3.1.6.5.2.2.1
An entry in the HDLC Interval table.
OBJECT-TYPE    
  HdlcIntervalEntry  

hdlcIntervalIfIndex 1.3.6.1.4.1.164.3.1.6.5.2.2.1.1
The index of the HDLC interface. It may be ifIndex.
OBJECT-TYPE    
  Integer32  

hdlcIntervalNumber 1.3.6.1.4.1.164.3.1.6.5.2.2.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).
OBJECT-TYPE    
  Integer32 1..96  

hdlcIntervalStatus 1.3.6.1.4.1.164.3.1.6.5.2.2.1.3
The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

hdlcIntervalLOF 1.3.6.1.4.1.164.3.1.6.5.2.2.1.4
The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by an HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalInFrames 1.3.6.1.4.1.164.3.1.6.5.2.2.1.5
The counter associated with the number of received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalInErrors 1.3.6.1.4.1.164.3.1.6.5.2.2.1.6
The counter associated with the number of Errored received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalOutFrames 1.3.6.1.4.1.164.3.1.6.5.2.2.1.7
The counter associated with the number of transmitted frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalAbortedFrames 1.3.6.1.4.1.164.3.1.6.5.2.2.1.8
The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

hdlcIntervalLengthError 1.3.6.1.4.1.164.3.1.6.5.2.2.1.9
The counter associated with the number of received frames with length error, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
OBJECT-TYPE    
  Gauge32  

rtrFACSViolation 1.3.6.1.4.1.164.6.1.11.0.1
The trap is sent for every violation of a FACS filter.
NOTIFICATION-TYPE    
  rtrFACSFrameData  
  rtrFACSProtocolType  

rtrSwDwnLoadTrap 1.3.6.1.4.1.164.6.1.11.0.2
The trap is sent after the tftp download of the software and before the decompression and reset operations.
NOTIFICATION-TYPE    
  fileName  

rtrInterfaces 1.3.6.1.4.1.164.11.1
OBJECT IDENTIFIER    

rtrConfigIfTable 1.3.6.1.4.1.164.11.1.1
Table of configured interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrConfigIfEntry

rtrConfigIfEntry 1.3.6.1.4.1.164.11.1.1.1
Each entry defines a configured interface.
OBJECT-TYPE    
  RtrConfigIfEntry  

rtrConfigIfIndex 1.3.6.1.4.1.164.11.1.1.1.1
This variable uniquely identifies the interface. It is used as a cross reference in other system tables
OBJECT-TYPE    
  InterfaceIndex  

rtrConfigIfType 1.3.6.1.4.1.164.11.1.1.1.2
This variable identifies the type of the specific entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of status is underCreation).
OBJECT-TYPE    
  RtrIfConfigTYPE  

rtrConfigIfName 1.3.6.1.4.1.164.11.1.1.1.3
This variable provides a logical name to a specific entry in rtrConfigIfTable. It is also used in identifying the Driver interfaces.
OBJECT-TYPE    
  DisplayString  

rtrConfigIfStatus 1.3.6.1.4.1.164.11.1.1.1.4
The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
OBJECT-TYPE    
  RowStatus  

rtrIfCfgTable 1.3.6.1.4.1.164.11.1.2
Router Interface Configuration Table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrIfCfgEntry

rtrIfCfgEntry 1.3.6.1.4.1.164.11.1.2.1
An entry in the Router Interface Configuration Table.
OBJECT-TYPE    
  RtrIfCfgEntry  

rtrIfCfgIndex 1.3.6.1.4.1.164.11.1.2.1.1
This object indicates the Router Interface Index. (In some cases it will be equal to the Router Interface ifIndex).
OBJECT-TYPE    
  Integer32  

rtrIfCfgIpAddress 1.3.6.1.4.1.164.11.1.2.1.2
IP Address of the Router Interface.
OBJECT-TYPE    
  IpAddress  

rtrIfCfgRowStatus 1.3.6.1.4.1.164.11.1.2.1.3
This object enables the user to create/delete entries of this table.
OBJECT-TYPE    
  RowStatus  

rtrIfCfgIpMask 1.3.6.1.4.1.164.11.1.2.1.4
IP Mask Address Router Interface.
OBJECT-TYPE    
  IpAddress  

rtrIfCfgIfIndex 1.3.6.1.4.1.164.11.1.2.1.5
ifIndex of the device interface connected to this Router Interface.
OBJECT-TYPE    
  Integer32  

rtrIfCfgType 1.3.6.1.4.1.164.11.1.2.1.6
The Router Interface Type. atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet router interface.
OBJECT-TYPE    
  INTEGER notApplicable(1), atm(2), lis(3), ethernet(4)  

rtrIfCfgVlanId 1.3.6.1.4.1.164.11.1.2.1.7
The VLAN ID assigned to Tagged frames transmitted from this Router Interface. The value inserted should be a defined VLAN.
OBJECT-TYPE    
  Integer32  

rtrIfCfgMtu 1.3.6.1.4.1.164.11.1.2.1.8
The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
OBJECT-TYPE    
  Integer32  

ipSpec 1.3.6.1.4.1.164.11.2
OBJECT IDENTIFIER    

rtrIpAddrTable 1.3.6.1.4.1.164.11.2.1
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrIpAddrEntry

rtrIpAddrEntry 1.3.6.1.4.1.164.11.2.1.1
The addressing information for one of this entity's IP addresses.
OBJECT-TYPE    
  RtrIpAddrEntry  

rtrIpAdEntAddr 1.3.6.1.4.1.164.11.2.1.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

rtrIpAdEntIfIndex 1.3.6.1.4.1.164.11.2.1.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

rtrIpAdEntNetMask 1.3.6.1.4.1.164.11.2.1.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

rtrIpAdEntForwardIpBroadcast 1.3.6.1.4.1.164.11.2.1.1.4
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtrIpAdEntBackupAddr 1.3.6.1.4.1.164.11.2.1.1.5
OBJECT-TYPE    
  IpAddress  

rtrIpAdEntStatus 1.3.6.1.4.1.164.11.2.1.1.6
The Status variable is used to create and destroy a Ip Addresses.
OBJECT-TYPE    
  RowStatus  

icmpSpec 1.3.6.1.4.1.164.11.2.2
OBJECT IDENTIFIER    

rtrIcmpGenErrMsgEnable 1.3.6.1.4.1.164.11.2.2.1
This variable controlls the ability to generate ICMP error messages
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtrIcmpRdTable 1.3.6.1.4.1.164.11.2.2.2
This table contains ICMP Router Discovery parameters configurated per IP interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrIcmpRdEntry

rtrIcmpRdEntry 1.3.6.1.4.1.164.11.2.2.2.1
The ICMP parameters configurated for IP interface.
OBJECT-TYPE    
  RtrIcmpRdEntry  

rtrIcmpRdIpAddr 1.3.6.1.4.1.164.11.2.2.2.1.1
The IP address to which this entry's information pertains.
OBJECT-TYPE    
  IpAddress  

rtrIcmpRdIpAdvertAddr 1.3.6.1.4.1.164.11.2.2.2.1.2
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
OBJECT-TYPE    
  IpAddress  

rtrIcmpRdMaxAdvertInterval 1.3.6.1.4.1.164.11.2.2.2.1.3
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
OBJECT-TYPE    
  Integer32 4..1800  

rtrIcmpRdMinAdvertInterval 1.3.6.1.4.1.164.11.2.2.2.1.4
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rtrIcmpRdMaxAdvertInterval. Default: 0.75 * rtrIcmpRdMaxAdvertInterval.
OBJECT-TYPE    
  Integer32 3..1800  

rtrIcmpRdAdvertLifetime 1.3.6.1.4.1.164.11.2.2.2.1.5
The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rtrIcmpRdMaxAdvertInterval.
OBJECT-TYPE    
  Integer32 4..9000  

rtrIcmpRdAdvertise 1.3.6.1.4.1.164.11.2.2.2.1.6
A flag indicating whether or not the address is to be advertised.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtrIcmpRdPreferenceLevel 1.3.6.1.4.1.164.11.2.2.2.1.7
The preferability of the address as a default router address, relative to other router addresses on the same subnet.
OBJECT-TYPE    
  Integer32  

rtrIcmpRdEntStatus 1.3.6.1.4.1.164.11.2.2.2.1.8
Setting of any value to this object set values of all fields to the default values.
OBJECT-TYPE    
  Integer32  

rip2Spec 1.3.6.1.4.1.164.11.2.3
OBJECT IDENTIFIER    

rtrRip2IfConfTable 1.3.6.1.4.1.164.11.2.3.1
This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2). It means that every time somebody creates/destroys a row in the rip2IfConfTable, the same row should be automatically created/destroyed in this table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrRip2IfConfEntry

rtrRip2IfConfEntry 1.3.6.1.4.1.164.11.2.3.1.1
An entry in table rtrRip2IfConfTable.
OBJECT-TYPE    
  RtrRip2IfConfEntry  

rtrRip2IfConfAddress 1.3.6.1.4.1.164.11.2.3.1.1.1
The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order
OBJECT-TYPE    
  IpAddress  

rtrRip2IfConfVirtualDis 1.3.6.1.4.1.164.11.2.3.1.1.2
This variable defines the virtual number of hops assigned to the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
OBJECT-TYPE    
  Integer32  

rtrRip2IfConfAutoSend 1.3.6.1.4.1.164.11.2.3.1.1.3
When set to enable only the default route is sent through the interface. When set to disable, regular RIPs are sent.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtrRip2IfConfRipEnable 1.3.6.1.4.1.164.11.2.3.1.1.4
This object shows whether RIP Protocol is enabled on the current interface.
OBJECT-TYPE    
  INTEGER no(2), yes(3)  

arpSpec 1.3.6.1.4.1.164.11.2.4
OBJECT IDENTIFIER    

rtrArpDeleteTable 1.3.6.1.4.1.164.11.2.4.1
Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
OBJECT-TYPE    
  Integer32  

rtrArpInactiveTimeOut 1.3.6.1.4.1.164.11.2.4.2
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
OBJECT-TYPE    
  Integer32  

rtrArpProxy 1.3.6.1.4.1.164.11.2.4.3
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtrNat 1.3.6.1.4.1.164.11.2.5
OBJECT IDENTIFIER    

rtrNatIfConfTable 1.3.6.1.4.1.164.11.2.5.1
A list of interfaces which require separate NAT configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrNatIfConfEntry

rtrNatIfConfEntry 1.3.6.1.4.1.164.11.2.5.1.1
A single routing domain in a single subnet.
OBJECT-TYPE    
  RtrNatIfConfEntry  

rtrNatIfVirtualAddress 1.3.6.1.4.1.164.11.2.5.1.1.1
The IP Address of the virtual subnet to be translated by the 'NAT box' attached to this interface.
OBJECT-TYPE    
  IpAddress  

rtrNatIfVirtualMask 1.3.6.1.4.1.164.11.2.5.1.1.2
The subnet Mask of the virtual subnet.
OBJECT-TYPE    
  IpAddress  

rtrNatIfConfStatus 1.3.6.1.4.1.164.11.2.5.1.1.3
Writing 'destroy' has the effect of deleting this interface.
OBJECT-TYPE    
  RowStatus  

rtrNatIfRealAddress 1.3.6.1.4.1.164.11.2.5.1.1.4
The IP Address of the real subnet which is used by 'NAT box' for translation.
OBJECT-TYPE    
  IpAddress  

rtrNatIfRealMask 1.3.6.1.4.1.164.11.2.5.1.1.5
The subnet Mask of the real subnet.
OBJECT-TYPE    
  IpAddress  

rtrNatIfType 1.3.6.1.4.1.164.11.2.5.1.1.6
NAT type. static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networks will be translated. dynamic - (Concurrent) Translate real IP network to larger or equal virtual IP network. TCP, UDP and ICMP sessions originated in virtual networks only can be translated and sessions originated in real networks will be rejected. A session that starts in the NAT system will be active until there will be no traffic for aging timeout period. pat - (Port Address Translation/ Single IP). Translate one real IP address to virtual IP network. TCP, UDP and ICMP sessions originated in virtual network only can be translated, sessions originated in real network will be rejected. A session that starts in the NAT system will be active until there will be no traffic for aging timeout period. transparent - In transparent mode all frames belonging to the defined IP network will be forwarded with no translation: virtual = real.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), pat(3), transparent(4)  

rtrPatTable 1.3.6.1.4.1.164.11.2.5.2
Port Address Translation (PAT - single IP NAT) configuration Table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrPatEntry

rtrPatEntry 1.3.6.1.4.1.164.11.2.5.2.1
Each entry describe unique mapping between real IP address, range of ports and protocol, to local (virtual) IP address. Ports are used in the TCP (rfc793) to name the ends of logical connections which carry long term conversations. For the purpose of providing services to unknown callers, a service contact port is defined.
OBJECT-TYPE    
  RtrPatEntry  

rtrPatIdx 1.3.6.1.4.1.164.11.2.5.2.1.1
Running index for PAT table.
OBJECT-TYPE    
  Integer32 1..8  

rtrPatRealAddress 1.3.6.1.4.1.164.11.2.5.2.1.2
The real IP Address used for translation
OBJECT-TYPE    
  IpAddress  

rtrPatVirtualAddress 1.3.6.1.4.1.164.11.2.5.2.1.3
The virtual IP Address used for translation
OBJECT-TYPE    
  IpAddress  

rtrPatLowestPort 1.3.6.1.4.1.164.11.2.5.2.1.4
Lowest Port number for this PAT entry
OBJECT-TYPE    
  Integer32 0..65535  

rtrPatHighestPort 1.3.6.1.4.1.164.11.2.5.2.1.5
Highest Port number for this PAT entry
OBJECT-TYPE    
  Integer32 0..65535  

rtrPatProtocol 1.3.6.1.4.1.164.11.2.5.2.1.6
Protocol selected. This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers correspond to IP header 'protocol' field
OBJECT-TYPE    
  INTEGER tcp(6), udp(17)  

rtrPatStatus 1.3.6.1.4.1.164.11.2.5.2.1.7
This object enables creating and deleting entries of the table.
OBJECT-TYPE    
  RowStatus  

rtrFACS 1.3.6.1.4.1.164.11.5
OBJECT IDENTIFIER    

rtrFACSDefaultAction 1.3.6.1.4.1.164.11.5.1
Used to define the default action for the device, when no FACS statements applicable to a given frame are defined.
OBJECT-TYPE    
  INTEGER block(1), forward(2), blockAndReport(129)  

rtrFACSActTable 1.3.6.1.4.1.164.11.5.2
The table of FACS action.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrFACSActEntry

rtrFACSActEntry 1.3.6.1.4.1.164.11.5.2.1
Each rtrFACSActEntry consist of the following parameters
OBJECT-TYPE    
  RtrFACSActEntry  

rtrFACSActType 1.3.6.1.4.1.164.11.5.2.1.1
This parameter indicates on which FACS Table the FACS action will preform.
OBJECT-TYPE    
  INTEGER tx(1), rx(2)  

rtrFACSActIfIndex 1.3.6.1.4.1.164.11.5.2.1.2
The interface to which this FACS entry is applicable.
OBJECT-TYPE    
  Integer32  

rtrFACSAction 1.3.6.1.4.1.164.11.5.2.1.3
The management station that sends a SET request for one of these actions with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased.
OBJECT-TYPE    
  INTEGER none(1), eraseIP(2), eraseDECnet(3), eraseIPX(4), eraseBrg(5), replaceIP(6), replaceIPX(8), replaceBrg(9), backupIP(10), backupIPX(12), backupBrg(13)  

rtrFACSActiveDB 1.3.6.1.4.1.164.11.5.2.1.4
This parameter will point on which Facs DataBase the SNMP agent read. The Active dataBase is Read Only. The user may change FACS statements in the temporary DataBase and then write it to the Active DB.
OBJECT-TYPE    
  INTEGER active(1), temporary(2)  

rtrFACSTable 1.3.6.1.4.1.164.11.5.3
The table of FACS statment.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrFACSEntry

rtrFACSEntry 1.3.6.1.4.1.164.11.5.3.1
Each FACS statment consists of the following parameters
OBJECT-TYPE    
  RtrFACSEntry  

rtrFACSIfIndex 1.3.6.1.4.1.164.11.5.3.1.1
The interface to which this FACS entry is applicable. For applications this variables is always 0.
OBJECT-TYPE    
  Integer32  

rtrFACSProtocolType 1.3.6.1.4.1.164.11.5.3.1.2
This parameter define the protocol the Security Access Control is applicable.
OBJECT-TYPE    
  INTEGER ip(1), ipx(2), dec(3), bridge(4)  

rtrFACSType 1.3.6.1.4.1.164.11.5.3.1.3
The Mode of in which this FACS statement operates. For applications this variable is always rx(2).
OBJECT-TYPE    
  INTEGER tx(1), rx(2), cod(3)  

rtrFACSIndex 1.3.6.1.4.1.164.11.5.3.1.4
Index to the FACS Table.
OBJECT-TYPE    
  Integer32  

rtrFACSSrcAdd 1.3.6.1.4.1.164.11.5.3.1.5
The size of the octet string will be according to the protocol type defined in rtrFACSProtocolType.
OBJECT-TYPE    
  OCTET STRING  

rtrFACSSrcAddMask 1.3.6.1.4.1.164.11.5.3.1.6
Source-address mask .
OBJECT-TYPE    
  OCTET STRING  

rtrFACSDesAdd 1.3.6.1.4.1.164.11.5.3.1.7
Destination-address The size of the octet string will be according to the protocol type define in rtrFACSProtocolType .
OBJECT-TYPE    
  OCTET STRING  

rtrFACSDesAddMask 1.3.6.1.4.1.164.11.5.3.1.8
Destination-address mask .
OBJECT-TYPE    
  OCTET STRING  

rtrFACSOperation 1.3.6.1.4.1.164.11.5.3.1.9
... .
OBJECT-TYPE    
  INTEGER block(1), forward(2), permit(3), deny(4), blockAndReport(129)  

rtrFACSNetFiltering 1.3.6.1.4.1.164.11.5.3.1.10
... .
OBJECT-TYPE    
  INTEGER none(1), l2multicast(2), arp(3), icmp(4), ip(5), udp(6), tcp(7), decnet(8), ipx(9)  

rtrFACSSocketNum 1.3.6.1.4.1.164.11.5.3.1.11
Port/socket number for different applications 0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), rip(520), sapIPX(1106), ripIPX(1107)
OBJECT-TYPE    
  Integer32  

rtrFACSMask1Id 1.3.6.1.4.1.164.11.5.3.1.12
Index into RND mask table FACS/COD Type) .
OBJECT-TYPE    
  Integer32  

rtrFACSMask2Id 1.3.6.1.4.1.164.11.5.3.1.13
Index into RND mask table FACS/COD according to the value of rtrFACSType .
OBJECT-TYPE    
  Integer32  

rtrFACSStatus 1.3.6.1.4.1.164.11.5.3.1.14
The status of a table entry.
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

rtrFACSFrameData 1.3.6.1.4.1.164.11.5.4
Data from the frame that violated a FACS Filter.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

rtrBridgePortConfigTable 1.3.6.1.4.1.164.11.7.1
Table of the bridge ports
OBJECT-TYPE    
  SEQUENCE OF  
    RtrBridgePortConfigEntry

rtrBridgePortConfigEntry 1.3.6.1.4.1.164.11.7.1.1
Each entry defines a bridge port
OBJECT-TYPE    
  RtrBridgePortConfigEntry  

rtrBridgePortCIndex 1.3.6.1.4.1.164.11.7.1.1.1
This is the index of the bridge port. It is the same as 'dot1dBasePort' of the Bridge MIB.
OBJECT-TYPE    
  Integer32  

rtrBridgePortCIf 1.3.6.1.4.1.164.11.7.1.1.2
The config ifIndex the bridge port is sitting on.
OBJECT-TYPE    
  Integer32  

rtrBridgePortCStatus 1.3.6.1.4.1.164.11.7.1.1.3
The status of the RtrBridgePortConfigEntry. Creating and destroying the bridge port is done by this variable.
OBJECT-TYPE    
  RowStatus  

radRouterConfig 1.3.6.1.4.1.164.11.9
OBJECT IDENTIFIER    

rtrConfigTable 1.3.6.1.4.1.164.11.9.1
The Router's Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrConfigEntry

rtrConfigEntry 1.3.6.1.4.1.164.11.9.1.1
An entry in the Router's Configuration table.
OBJECT-TYPE    
  RtrConfigEntry  

rtrConfigIndex 1.3.6.1.4.1.164.11.9.1.1.1
This object indicates the Router's Index.
OBJECT-TYPE    
  Integer32  

rtrConfigDefaultGateway 1.3.6.1.4.1.164.11.9.1.1.2
Router Default Gateway.
OBJECT-TYPE    
  IpAddress  

rtrConfigArpAgingTime 1.3.6.1.4.1.164.11.9.1.1.3
ARP Aging Time.
OBJECT-TYPE    
  Integer32  

rtrConfigClassifierTosMask 1.3.6.1.4.1.164.11.9.1.1.5
This object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR -- rfc795 0x1E for Cisco 0xE0 for Precedence -- rfc795 0xFC for Diffserv Else for Manual .
OBJECT-TYPE    
  Integer32  

rtrConfigRIPMode 1.3.6.1.4.1.164.11.9.1.1.6
This object determines the Router Information Protocol to measure the shortest path between 2 positions on the network.
OBJECT-TYPE    
  INTEGER notApplicable(1), rip1(2), rip2(3), rip1And2(4)  

rtrFwdTable 1.3.6.1.4.1.164.11.9.3
The Router's Forwarding Table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtrFwdEntry

rtrFwdEntry 1.3.6.1.4.1.164.11.9.3.1
An entry in the Router's Forwarding table.
OBJECT-TYPE    
  RtrFwdEntry  

rtrFwdIdx 1.3.6.1.4.1.164.11.9.3.1.1
This object indicates the Router Index.
OBJECT-TYPE    
  Integer32  

rtrFwdIpAddress 1.3.6.1.4.1.164.11.9.3.1.2
This object indicates the Destination IP Address.
OBJECT-TYPE    
  IpAddress  

rtrFwdIpMask 1.3.6.1.4.1.164.11.9.3.1.3
This object indicates the Mask IP address.
OBJECT-TYPE    
  IpAddress  

rtrFwdRuleIdx 1.3.6.1.4.1.164.11.9.3.1.4
This object indicates the Rule's Number.
OBJECT-TYPE    
  Integer32  

rtrFwdRowStatus 1.3.6.1.4.1.164.11.9.3.1.5
This object enables the user to create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of entries can be deleted by the user. Entry of Type rtrFwdType = interface(2) are created/deleted automatically by the Agent when the user creates/deletes an interface of the Router.
OBJECT-TYPE    
  RowStatus  

rtrFwdNextHop 1.3.6.1.4.1.164.11.9.3.1.6
This object indicates the IP Address of the Next Hop.
OBJECT-TYPE    
  IpAddress  

rtrFwdIfIndex 1.3.6.1.4.1.164.11.9.3.1.7
This object indicates the Interface Index.
OBJECT-TYPE    
  Integer32  

rtrFwdType 1.3.6.1.4.1.164.11.9.3.1.8
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

rtrFwdProto 1.3.6.1.4.1.164.11.9.3.1.9
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), rip(8), lis(41)  

rtrFwdEthQueue 1.3.6.1.4.1.164.11.9.3.1.10
This object indicates the ETH Queue number.
OBJECT-TYPE    
  Integer32  

rtrFwdMetric1 1.3.6.1.4.1.164.11.9.3.1.11
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

radAtmSignalingMonitor 1.3.6.1.4.1.164.12.6
OBJECT IDENTIFIER    

smSVCOperState 1.3.6.1.4.1.164.12.6.1
The SVC monitoring operational state.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

smSVCAdminStatus 1.3.6.1.4.1.164.12.6.2
The SVC monitoring status.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

smILMIMode 1.3.6.1.4.1.164.12.6.3
The ILMI operational Mode.
OBJECT-TYPE    
  INTEGER disable(1), keepAliveOnly(2), enable(3)  

smILMIStatus 1.3.6.1.4.1.164.12.6.4
ILMI protocol status (VCC 0,16).
OBJECT-TYPE    
  INTEGER down(1), up(2), disable(3)  

smUNIVersion 1.3.6.1.4.1.164.12.6.5
The UNI version that is used by both sides.
OBJECT-TYPE    
  INTEGER uni3-0(1), uni3-1(2)  

smPolicing 1.3.6.1.4.1.164.12.6.6
The type of the police action performed on the cells transmitted from the user side to the network side.
OBJECT-TYPE    
  INTEGER none(1), police(2), monitoring(3)  

smSAALStatus 1.3.6.1.4.1.164.12.6.7
Signaling data link (VCC 0,5) status.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

smOpenedSesssions 1.3.6.1.4.1.164.12.6.8
The number of SVC sessions currently opened.
OBJECT-TYPE    
  Gauge32  

smUserRejectedSessions 1.3.6.1.4.1.164.12.6.9
The number of sessions that the user side rejected to open.
OBJECT-TYPE    
  Gauge32  

smNetworkRejectedSessions 1.3.6.1.4.1.164.12.6.10
The number of sessions that the Network side rejected.
OBJECT-TYPE    
  Gauge32  

smHostRejectedSessions 1.3.6.1.4.1.164.12.6.11
The number of sessions that the device rejected to open.
OBJECT-TYPE    
  Gauge32  

smVclILMISessionVpi 1.3.6.1.4.1.164.12.6.12
ILMI Keep alive session VPI channel. Default: 0. (VCI=16, fixed).
OBJECT-TYPE    
  Integer32 0..255  

Defined Objects

HdlcEntry  
SEQUENCE    
  INTEGER as hdlcProtocol  
  INTEGER as hdlcRateResolution  
  INTEGER as hdlcTxClockSource  
  INTEGER as hdlcTerminalMode  
  INTEGER as hdlcLoopbackState  
  INTEGER as hdlcTxClockPolarity  
  INTEGER as hdlcFlowControl  
  Integer32 as hdlcLineRate  
  INTEGER as hdlcRxClockMode  
  Gauge32 as hdlcLOF  
  INTEGER as hdlcRxClockPolarity  

HdlcCurrentEntry  
SEQUENCE    
  Integer32 as hdlcCurrentIfIndex  
  OCTET STRING as hdlcCurrentStatus  
  Gauge32 as hdlcCurrentLOF  
  Gauge32 as hdlcCurrentInFrames  
  Gauge32 as hdlcCurrentInErrors  
  Gauge32 as hdlcCurrentOutFrames  
  Gauge32 as hdlcCurrentAbortedFrames  
  Gauge32 as hdlcCurrentLengthError  

HdlcIntervalEntry  
SEQUENCE    
  Integer32 as hdlcIntervalIfIndex  
  Integer32 as hdlcIntervalNumber  
  OCTET STRING as hdlcIntervalStatus  
  Gauge32 as hdlcIntervalLOF  
  Gauge32 as hdlcIntervalInFrames  
  Gauge32 as hdlcIntervalInErrors  
  Gauge32 as hdlcIntervalOutFrames  
  Gauge32 as hdlcIntervalAbortedFrames  
  Gauge32 as hdlcIntervalLengthError  

RtrIfConfigTYPE  
INTEGER other(1), ethernetLan(6), iso88023Csmacd(7), tokenRingLan(9), fddi(15), basicISDN(20), primaryISDN(21), propPointToPoint(22), slip(28), ppp(23), frameRelay(32), rs232(33), atm(37), x25ple(40), v35(45), fastEther(62), fastEtherFX(69), virtualNet(500), cod(1001), backUp(1002), dialUp(1004), b1isdn(1010), b2isdn(1011), ipBcst(1020), ipPtp(1021), ipxRaw(1022), ipxEtType(1023), ipxLlcSap(1024), ipxLlcSnap(1025), ipxPtp(1026), brgUnder(1027), wanDriver(1060), ethernetDriver(1061), tokenRingDriver(1062), fddiDriver(1064), virtualLan(1080), unknown(1100)    

RtrConfigIfEntry  
SEQUENCE    
  InterfaceIndex as rtrConfigIfIndex  
  RtrIfConfigTYPE as rtrConfigIfType  
  DisplayString as rtrConfigIfName  
  RowStatus as rtrConfigIfStatus  

RtrIfCfgEntry  
SEQUENCE    
  Integer32 as rtrIfCfgIndex  
  IpAddress as rtrIfCfgIpAddress  
  RowStatus as rtrIfCfgRowStatus  
  IpAddress as rtrIfCfgIpMask  
  Integer32 as rtrIfCfgIfIndex  
  INTEGER as rtrIfCfgType  
  Integer32 as rtrIfCfgVlanId  
  Integer32 as rtrIfCfgMtu  

RtrIpAddrEntry  
SEQUENCE    
  IpAddress as rtrIpAdEntAddr  
  Integer32 as rtrIpAdEntIfIndex  
  IpAddress as rtrIpAdEntNetMask  
  INTEGER as rtrIpAdEntForwardIpBroadcast  
  IpAddress as rtrIpAdEntBackupAddr  
  RowStatus as rtrIpAdEntStatus  

RtrIcmpRdEntry  
SEQUENCE    
  IpAddress as rtrIcmpRdIpAddr  
  IpAddress as rtrIcmpRdIpAdvertAddr  
  Integer32 as rtrIcmpRdMaxAdvertInterval  
  Integer32 as rtrIcmpRdMinAdvertInterval  
  Integer32 as rtrIcmpRdAdvertLifetime  
  INTEGER as rtrIcmpRdAdvertise  
  Integer32 as rtrIcmpRdPreferenceLevel  
  Integer32 as rtrIcmpRdEntStatus  

RtrRip2IfConfEntry  
SEQUENCE    
  IpAddress as rtrRip2IfConfAddress  
  Integer32 as rtrRip2IfConfVirtualDis  
  INTEGER as rtrRip2IfConfAutoSend  
  INTEGER as rtrRip2IfConfRipEnable  

RtrNatIfConfEntry  
SEQUENCE    
  IpAddress as rtrNatIfVirtualAddress  
  IpAddress as rtrNatIfVirtualMask  
  RowStatus as rtrNatIfConfStatus  
  IpAddress as rtrNatIfRealAddress  
  IpAddress as rtrNatIfRealMask  
  INTEGER as rtrNatIfType  

RtrPatEntry  
SEQUENCE    
  Integer32 as rtrPatIdx  
  IpAddress as rtrPatRealAddress  
  IpAddress as rtrPatVirtualAddress  
  Integer32 as rtrPatLowestPort  
  Integer32 as rtrPatHighestPort  
  INTEGER as rtrPatProtocol  
  RowStatus as rtrPatStatus  

RtrFACSActEntry  
SEQUENCE    
  INTEGER as rtrFACSActType  
  Integer32 as rtrFACSActIfIndex  
  INTEGER as rtrFACSAction  
  INTEGER as rtrFACSActiveDB  

RtrFACSEntry  
SEQUENCE    
  Integer32 as rtrFACSIfIndex  
  INTEGER as rtrFACSProtocolType  
  INTEGER as rtrFACSType  
  Integer32 as rtrFACSIndex  
  OCTET STRING as rtrFACSSrcAdd  
  OCTET STRING as rtrFACSSrcAddMask  
  OCTET STRING as rtrFACSDesAdd  
  OCTET STRING as rtrFACSDesAddMask  
  INTEGER as rtrFACSOperation  
  INTEGER as rtrFACSNetFiltering  
  Integer32 as rtrFACSSocketNum  
  Integer32 as rtrFACSMask1Id  
  Integer32 as rtrFACSMask2Id  
  INTEGER as rtrFACSStatus  

RtrBridgePortConfigEntry  
SEQUENCE    
  Integer32 as rtrBridgePortCIndex  
  Integer32 as rtrBridgePortCIf  
  RowStatus as rtrBridgePortCStatus  

RtrConfigEntry  
SEQUENCE    
  Integer32 as rtrConfigIndex  
  IpAddress as rtrConfigDefaultGateway  
  Integer32 as rtrConfigArpAgingTime  
  Integer32 as rtrConfigClassifierTosMask  
  INTEGER as rtrConfigRIPMode  

RtrFwdEntry  
SEQUENCE    
  Integer32 as rtrFwdIdx  
  IpAddress as rtrFwdIpAddress  
  IpAddress as rtrFwdIpMask  
  Integer32 as rtrFwdRuleIdx  
  RowStatus as rtrFwdRowStatus  
  IpAddress as rtrFwdNextHop  
  Integer32 as rtrFwdIfIndex  
  INTEGER as rtrFwdType  
  INTEGER as rtrFwdProto  
  Integer32 as rtrFwdEthQueue  
  Integer32 as rtrFwdMetric1