RAPID-CITY

File: RAPID-CITY.mib (838018 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
RFC-1212 RFC1213-MIB SNMPv2-MIB
ATM-TC-MIB

Imported symbols

MODULE-IDENTITY TEXTUAL-CONVENTION enterprises
IpAddress TimeTicks Counter
OBJECT-TYPE DisplayString RowStatus
TruthValue MacAddress Gauge32
NOTIFICATION-TYPE Counter32 Counter64
snmpV2 snmpModules snmpMIBObjects
snmpTraps snmpMIB AtmAddr

Defined Objects

rapidCity 1.3.6.1.4.1.2272
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcMgmt 1.3.6.1.4.1.2272.1
OBJECT IDENTIFIER    

rcSystem 1.3.6.1.4.1.2272.1.1
OBJECT IDENTIFIER    

rcSysIpAddr 1.3.6.1.4.1.2272.1.1.1
This entity's IP address.
OBJECT-TYPE    
  IpAddress  

rcSysNetMask 1.3.6.1.4.1.2272.1.1.2
This entity's subnet mask.
OBJECT-TYPE    
  IpAddress  

rcSysBroadcast 1.3.6.1.4.1.2272.1.1.3
This entity's broadcast address.
OBJECT-TYPE    
  IpAddress  

rcSysCommReadWriteAll 1.3.6.1.4.1.2272.1.1.4
When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is granted to all items in the MIB. If it doesn't match, the rcSysCommReadWrite string is compared next.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysCommReadWrite 1.3.6.1.4.1.2272.1.1.5
When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is granted to all items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadWriteLayer3 string is compared next.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysCommReadOnly 1.3.6.1.4.1.2272.1.1.6
When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is granted to all items in the MIB except community strings. (Community strings appear empty when read.) If it doesn't match, no access is granted, no response is sent back to the SNMP requester, and SNMP traps are sent to the SNMP trap receiver(s) if configured.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysVersion 1.3.6.1.4.1.2272.1.1.7
Software version running on device
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysAction 1.3.6.1.4.1.2272.1.1.8
Initiate a system action.
OBJECT-TYPE    
  INTEGER none(1), hardReset(2), softReset(3), saveToNVRAM(4), resetCounters(5), saveToStandbyNVRAM(6), cpuSwitchOver(7), checkSwInFlash(8), checkSwInPcmcia(9), resetConsole(10), resetModem(11), flushIpRouteTbl(12), saveRuntimeConfig(13), saveRuntimeConfigToSlave(14), saveBootConfig(15), saveSlaveBootConfig(16), resetIstStatCounters(17)  

rcSysResult 1.3.6.1.4.1.2272.1.1.9
Result from the last system action.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4), flashReadFailed(5), pcmciaReadFailed(6), crcCheckFailed(7), noStandbyCpu(8)  

rcSysLastChange 1.3.6.1.4.1.2272.1.1.10
Last management initiated configuration change since sysUpTime.
OBJECT-TYPE    
  TimeTicks  

rcSysLastVlanChange 1.3.6.1.4.1.2272.1.1.11
Last management initiated VLAN configuration change since sysUpTime.
OBJECT-TYPE    
  TimeTicks  

rcSysLastStatisticsReset 1.3.6.1.4.1.2272.1.1.12
Last management initiated statistics reset since sysUpTime.
OBJECT-TYPE    
  TimeTicks  

rcSysBufferUtil 1.3.6.1.4.1.2272.1.1.13
Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion.
OBJECT-TYPE    
  INTEGER 0..100  

rcSysBufferUtilPeak 1.3.6.1.4.1.2272.1.1.14
The largest buffer utilization since sysUpTime
OBJECT-TYPE    
  INTEGER 0..100  

rcSysBufferUtilPeakTime 1.3.6.1.4.1.2272.1.1.15
Timestamp for rcSysPeakBandwidth
OBJECT-TYPE    
  TimeTicks  

rcSysNVRamSize 1.3.6.1.4.1.2272.1.1.16
Total Non-volatile RAM in Kbytes
OBJECT-TYPE    
  Gauge32  

rcSysNVRamUsed 1.3.6.1.4.1.2272.1.1.17
Non-volatile RAM in use in Kbytes
OBJECT-TYPE    
  Gauge32  

rcSysLastSaveToNVRam 1.3.6.1.4.1.2272.1.1.18
SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file.
OBJECT-TYPE    
  TimeTicks  

rcSysLastSaveToStandbyNVRam 1.3.6.1.4.1.2272.1.1.19
SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to.
OBJECT-TYPE    
  TimeTicks  

rcSysCpuUtil 1.3.6.1.4.1.2272.1.1.20
Percentage of CPU utilization
OBJECT-TYPE    
  Gauge32  

rcSysSwitchFabricUtil 1.3.6.1.4.1.2272.1.1.21
Percentage of Switching Fabric utilization
OBJECT-TYPE    
  Gauge32  

rcSysRmonMemSize 1.3.6.1.4.1.2272.1.1.22
Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE.
OBJECT-TYPE    
  INTEGER 250000..4000000  

rcSysRmonEnable 1.3.6.1.4.1.2272.1.1.23
Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the device will get started immediately if the amount of memory specified by rcSysRmonMemSize is currently available in the device. To disable the RMON feature, set this variable to false, save the new setting to NVRAM, and reboot the device. After the device is rebooted the RMON agent will not be operational.
OBJECT-TYPE    
  TruthValue  

rcSysRmonSaveConfig 1.3.6.1.4.1.2272.1.1.24
Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a system reboot. Setting rcSysRmonSaveConfig to true does not immediately save the configuration information. The save happens when the rcSysAction variable is set to 'saveToNVRAM(4)'. This option is only meaningful when the rcSysRmonEnable variable is set to true.
OBJECT-TYPE    
  TruthValue  

rcSysRmonTrapOption 1.3.6.1.4.1.2272.1.1.25
Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients in the system trap receiver table.
OBJECT-TYPE    
  INTEGER toOwner(1), toAll(2)  

rcSysSupportRouting 1.3.6.1.4.1.2272.1.1.26
Used to indicate whether routing is supported in this product.
OBJECT-TYPE    
  TruthValue  

rcSysSupportWebServer 1.3.6.1.4.1.2272.1.1.27
Used to indicate whether WebServer is supported in this product.
OBJECT-TYPE    
  TruthValue  

rcSysLastIpAddrChange 1.3.6.1.4.1.2272.1.1.28
Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by this variable.
OBJECT-TYPE    
  TimeTicks  

rcSysCommReadWriteLayer3 1.3.6.1.4.1.2272.1.1.29
When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-write access is granted to all Layer-3 items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadWriteLayer2 string is compared next.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysCommReadWriteLayer2 1.3.6.1.4.1.2272.1.1.30
When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it matches, read-write access is granted to all Layer-2 items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadOnly string is compared next.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysAccessPolicyEnable 1.3.6.1.4.1.2272.1.1.31
Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied access to this device.
OBJECT-TYPE    
  TruthValue  

rcSysDefaultRuntimeConfigFileName 1.3.6.1.4.1.2272.1.1.32
default config.
OBJECT-TYPE    
  DisplayString  

rcSysDefaultBootConfigFileName 1.3.6.1.4.1.2272.1.1.33
default boot config.
OBJECT-TYPE    
  DisplayString  

rcSysConfigFileName 1.3.6.1.4.1.2272.1.1.34
File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used instead of the file name specified in rcSysDefaultRuntimeConfigFileName. If rcSysAction is set to 'saveBootConfig' or 'saveBootConfigToSlave' then this file name will be used insteaad of the file name specified in rcSysDefaultBootConfigFileName. If the file name is blank (i.e., nothing is entered) then the default file name will be used.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcSysLastRunTimeConfigSave 1.3.6.1.4.1.2272.1.1.35
SysUpTime of the last time when the run time configuration was written to.
OBJECT-TYPE    
  TimeTicks  

rcSysLastRunTimeConfigSaveToSlave 1.3.6.1.4.1.2272.1.1.36
SysUpTime of the last time when the run time configuration was written to slave NVRAM.
OBJECT-TYPE    
  TimeTicks  

rcSysLastBootConfigSave 1.3.6.1.4.1.2272.1.1.37
SysUpTime of the last time when the boot configuration was written to.
OBJECT-TYPE    
  TimeTicks  

rcSysLastBootConfigSaveOnSlave 1.3.6.1.4.1.2272.1.1.38
SysUpTime of the last time when the boot configuration was written on the slave NVRAM.
OBJECT-TYPE    
  TimeTicks  

rcSysRmonUtilizationMethod 1.3.6.1.4.1.2272.1.1.39
Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed to calculate port utilization (this is the standard RMON rfc1271 convention). When set to 'fullDuplex', RMON will use InOctets and OutOctets and 2X the port's speed to calculate port utilization. Furthermore, if this variable is set to 'fullDuplex', but the port is operating in a half-duplex mode, the calculation defaults back to the rfc1271 convention.
OBJECT-TYPE    
  INTEGER halfDuplex(1), fullDuplex(2)  

rcSysCommReadWriteLayer1 1.3.6.1.4.1.2272.1.1.40
read-write L1 access
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysOtherBufferUtil 1.3.6.1.4.1.2272.1.1.41
bw currently consumed
OBJECT-TYPE    
  Gauge32  

rcSysOtherBufferUtilPeak 1.3.6.1.4.1.2272.1.1.42
peak bw since reset
OBJECT-TYPE    
  Gauge32  

rcSysOtherBufferUtilPeakTime 1.3.6.1.4.1.2272.1.1.43
timestamp for rcSysPeakBw
OBJECT-TYPE    
  TimeTicks  

rcSysOtherCpuUtil 1.3.6.1.4.1.2272.1.1.44
% cpu utilization
OBJECT-TYPE    
  Gauge32  

rcSysOtherSwitchFabricUtil 1.3.6.1.4.1.2272.1.1.45
% switch fabric util
OBJECT-TYPE    
  Gauge32  

rcSysDramSize 1.3.6.1.4.1.2272.1.1.46
Dram size in mega-bytes
OBJECT-TYPE    
  INTEGER  

rcSysDramUsed 1.3.6.1.4.1.2272.1.1.47
Dram used in percentage
OBJECT-TYPE    
  Gauge32  

rcSysDramFree 1.3.6.1.4.1.2272.1.1.48
Dram free size in kilo-bytes
OBJECT-TYPE    
  INTEGER  

rcSysDramMaxBlockFree 1.3.6.1.4.1.2272.1.1.49
Dram max block free size in kilo-bytes
OBJECT-TYPE    
  INTEGER  

rcSysVirtualIpAddr 1.3.6.1.4.1.2272.1.1.51
Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP address, this address goes in the switch config file and not the boot config
OBJECT-TYPE    
  IpAddress  

rcSysVirtualNetMask 1.3.6.1.4.1.2272.1.1.52
Net mask of the management virtual Ip address
OBJECT-TYPE    
  IpAddress  

rcSysReadWriteLevel 1.3.6.1.4.1.2272.1.1.53
The status of the read/write level
OBJECT-TYPE    
  INTEGER  

rcSysTrapRecvTable 1.3.6.1.4.1.2272.1.1.60
The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity when an exception condition occurs.
OBJECT-TYPE    
  SEQUENCE OF  
    RcSysTrapRecvEntry

rcSysTrapRecvEntry 1.3.6.1.4.1.2272.1.1.60.1
A trap receiver table entry.
OBJECT-TYPE    
  RcSysTrapRecvEntry  

rcSysTrapRecvAddress 1.3.6.1.4.1.2272.1.1.60.1.1
IP address for trap receiver.
OBJECT-TYPE    
  IpAddress  

rcSysTrapRecvVersion 1.3.6.1.4.1.2272.1.1.60.1.2
OBJECT-TYPE    
  INTEGER v1(1), v2c(2)  

rcSysTrapRecvCommunity 1.3.6.1.4.1.2272.1.1.60.1.3
Community string used for trap messages to this trap receiver.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcSysTrapRecvSrcAddress 1.3.6.1.4.1.2272.1.1.60.1.4
Source IP address to use when sending traps. This IP address will be inserted into the source IP address field in the UDP trap packet.
OBJECT-TYPE    
  IpAddress  

rcSysTrapRecvRowStatus 1.3.6.1.4.1.2272.1.1.60.1.5
Used to create/delete entries
OBJECT-TYPE    
  RowStatus  

rcSysAccessPolicyTable 1.3.6.1.4.1.2272.1.1.61
Management access policy table. This table is used to permit or deny access to this device via the specified source Id.
OBJECT-TYPE    
  SEQUENCE OF  
    RcSysAccesspolicyEntry

rcSysAccessPolicyEntry 1.3.6.1.4.1.2272.1.1.61.1
An access policy table entry.
OBJECT-TYPE    
  RcSysAccesspolicyEntry  

rcSysAccessPolicyId 1.3.6.1.4.1.2272.1.1.61.1.1
Policy Id.
OBJECT-TYPE    
  INTEGER 1..65535  

rcSysAccessPolicyName 1.3.6.1.4.1.2272.1.1.61.1.2
Name of this policy.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcSysAccessPolicyPolicyEnable 1.3.6.1.4.1.2272.1.1.61.1.3
Indicate whether this policy is currently active.
OBJECT-TYPE    
  TruthValue  

rcSysAccessPolicyMode 1.3.6.1.4.1.2272.1.1.61.1.4
Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

rcSysAccessPolicyService 1.3.6.1.4.1.2272.1.1.61.1.5
Is represented as bitset to indicate which protocol this entry should be applied to.
OBJECT-TYPE    
  INTEGER telnet(1), snmp(2), tftp(4), ftp(8), http(16), rlogin(32), ssh(64)  

rcSysAccessPolicyPrecedence 1.3.6.1.4.1.2272.1.1.61.1.6
Used to indicate the precedence of this policy. The Lower the number the higher the precedence.
OBJECT-TYPE    
  INTEGER 1..128  

rcSysAccessPolicyNetAddr 1.3.6.1.4.1.2272.1.1.61.1.7
Source network IP address.
OBJECT-TYPE    
  IpAddress  

rcSysAccessPolicyNetMask 1.3.6.1.4.1.2272.1.1.61.1.8
Source network mask.
OBJECT-TYPE    
  IpAddress  

rcSysAccessPolicyTrustedHostAddr 1.3.6.1.4.1.2272.1.1.61.1.9
Trusted IP address of host performing a rlogin into the device.
OBJECT-TYPE    
  IpAddress  

rcSysAccessPolicyTrustedHostUserName 1.3.6.1.4.1.2272.1.1.61.1.10
User name on the trusted host performing a rlogin into the device.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

rcSysAccessPolicyAccessLevel 1.3.6.1.4.1.2272.1.1.61.1.11
Access level of trusted host.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2), readWriteAll(3)  

rcSysAccessPolicyLog 1.3.6.1.4.1.2272.1.1.61.1.12
Used to indicate whether logging should be performed if this policy was applied.
OBJECT-TYPE    
  TruthValue  

rcSysAccessPolicyUsage 1.3.6.1.4.1.2272.1.1.61.1.13
Usage counter
OBJECT-TYPE    
  Counter  

rcSysAccessPolicyRowStatus 1.3.6.1.4.1.2272.1.1.61.1.14
Used to create/delete an entry
OBJECT-TYPE    
  RowStatus  

rcTftp 1.3.6.1.4.1.2272.1.2
OBJECT IDENTIFIER    

rcTftpHost 1.3.6.1.4.1.2272.1.2.1
Name of source/destination host for the TFTP transfer.
OBJECT-TYPE    
  IpAddress  

rcTftpFile 1.3.6.1.4.1.2272.1.2.2
Name of file for the TFTP transfer.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcTftpAction 1.3.6.1.4.1.2272.1.2.3
OBJECT-TYPE    
  INTEGER none(1), downloadConfig(2), uploadConfig(3), downloadSwToFlash(4), downloadSwToPcmcia(5), uploadSw(6), downloadSwToDram(7)  

rcTftpResult 1.3.6.1.4.1.2272.1.2.4
Contains result of the last Tftp action request.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), noResponse(3), fileAccessError(4), badFlash(5), flashEraseFailed(6), pcmciaEraseFailed(7), success(8), fail(9), writeToNvramFailed(10), flashWriteFailed(11), pcmciaWriteFailed(12), configFileTooBig(13), imageFileTooBig(14), noPcmciaDetect(15), pcmciaNotSupported(16), invalidFile(17), noMemory(18), xferError(19), crcError(20), readNvramFailed(21), pcmciaWriteProtect(22)  

rcVlan 1.3.6.1.4.1.2272.1.3
OBJECT IDENTIFIER    

rcVlanNumVlans 1.3.6.1.4.1.2272.1.3.1
The number of VLANs currently defined in the switch.
OBJECT-TYPE    
  INTEGER 1..128  

rcVlanTable 1.3.6.1.4.1.2272.1.3.2
A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanEntry

rcVlanEntry 1.3.6.1.4.1.2272.1.3.2.1
Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of ports defined by PortMembers must be a subset of the set of ports in the underlying STG of the VLAN. o The bitwise AND of PortMembers and NotAllowToJoin must be the empty set. o The bitwise OR of PortMembers and NotAllowToJoin must be the set of ports in the underlying STG of the VLAN. o The set of ports defined by StaticMembers must be a subset of the set of ports defined by PortMembers. o The bitwise XOR of PortMembers and StaticMembers defines the set of dynamic (potential) members of the VLAN. o The set of ports defined by ActiveMembers must be a subset of the set of ports defined by PortMembers.
OBJECT-TYPE    
  RcVlanEntry  

rcVlanId 1.3.6.1.4.1.2272.1.3.2.1.1
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
OBJECT-TYPE    
  INTEGER 1..4094  

rcVlanName 1.3.6.1.4.1.2272.1.3.2.1.2
An administratively-assigned name for this VLAN.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcVlanColor 1.3.6.1.4.1.2272.1.3.2.1.3
An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen.
OBJECT-TYPE    
  INTEGER 0..32  

rcVlanHighPriority 1.3.6.1.4.1.2272.1.3.2.1.4
A flag to note whether frames in this VLAN should be assigned a high switching priority.
OBJECT-TYPE    
  TruthValue  

rcVlanRoutingEnable 1.3.6.1.4.1.2272.1.3.2.1.5
A flag to note whether IP routing is enabled in this VLAN.
OBJECT-TYPE    
  TruthValue  

rcVlanIfIndex 1.3.6.1.4.1.2272.1.3.2.1.6
When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero.
OBJECT-TYPE    
  InterfaceIndex  

rcVlanAction 1.3.6.1.4.1.2272.1.3.2.1.7
VLAN related actions.
OBJECT-TYPE    
  INTEGER none(1), flushMacFdb(2), flushArp(3), flushIp(4), flushDynMemb(5), all(6), flushSnoopMemb(7), triggerRipUpdate(8), flushSnoopMRtr(9)  

rcVlanResult 1.3.6.1.4.1.2272.1.3.2.1.8
The result from the last VLAN action.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4)  

rcVlanStgId 1.3.6.1.4.1.2272.1.3.2.1.9
Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero.
OBJECT-TYPE    
  INTEGER 0..128  

rcVlanType 1.3.6.1.4.1.2272.1.3.2.1.10
The type of VLAN, distinguished according to the policy used to define its port membership.
OBJECT-TYPE    
  INTEGER byPort(1), byIpSubnet(2), byProtocolId(3), bySrcMac(4), byDstMcast(5)  

rcVlanPortMembers 1.3.6.1.4.1.2272.1.3.2.1.11
The set of ports that are members (static or dynamic) of this VLAN.
OBJECT-TYPE    
  PortSet  

rcVlanActiveMembers 1.3.6.1.4.1.2272.1.3.2.1.12
The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met.
OBJECT-TYPE    
  PortSet  

rcVlanStaticMembers 1.3.6.1.4.1.2272.1.3.2.1.13
The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.
OBJECT-TYPE    
  PortSet  

rcVlanNotAllowToJoin 1.3.6.1.4.1.2272.1.3.2.1.14
The set of ports that are not allowed to become members of this VLAN.
OBJECT-TYPE    
  PortSet  

rcVlanProtocolId 1.3.6.1.4.1.2272.1.3.2.1.15
The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).
OBJECT-TYPE    
  INTEGER none(0), ip(1), ipx802dot3(2), ipx802dot2(3), ipxSnap(4), ipxEthernet2(5), appleTalk(6), decLat(7), decOther(8), sna802dot2(9), snaEthernet2(10), netBios(11), xns(12), vines(13), ipV6(14), usrDefined(15), rarp(16)  

rcVlanSubnetAddr 1.3.6.1.4.1.2272.1.3.2.1.16
The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

rcVlanSubnetMask 1.3.6.1.4.1.2272.1.3.2.1.17
The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

rcVlanAgingTime 1.3.6.1.4.1.2272.1.3.2.1.18
The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs.
OBJECT-TYPE    
  INTEGER 10..1000000  

rcVlanMacAddress 1.3.6.1.4.1.2272.1.3.2.1.19
The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1).
OBJECT-TYPE    
  MacAddress  

rcVlanRowStatus 1.3.6.1.4.1.2272.1.3.2.1.20
Used to create/delete entries in the rcVlanTable.
OBJECT-TYPE    
  RowStatus  

rcVlanIgmpSnoopEnable 1.3.6.1.4.1.2272.1.3.2.1.21
A flag to note whether IGMP Snooping is enabled on this VLAN.
OBJECT-TYPE    
  TruthValue  

rcVlanIgmpSnoopReportProxyEnable 1.3.6.1.4.1.2272.1.3.2.1.22
A flag to note whether IGMP Report Proxy is enabled on this VLAN.
OBJECT-TYPE    
  TruthValue  

rcVlanIgmpSnoopRobustness 1.3.6.1.4.1.2272.1.3.2.1.23
This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is robust to (Robustness - 1) packet losses.
OBJECT-TYPE    
  INTEGER 1..255  

rcVlanIgmpSnoopQueryInterval 1.3.6.1.4.1.2272.1.3.2.1.24
The interval (in seconds) between IGMP Host-Query packets transmitted on this interface.
OBJECT-TYPE    
  INTEGER 1..65535  

rcVlanIgmpSnoopMRouterPorts 1.3.6.1.4.1.2272.1.3.2.1.25
The set of ports in this VLAN that provide connectivity to an IP Multicast router.
OBJECT-TYPE    
  PortSet  

rcVlanUserDefinedPid 1.3.6.1.4.1.2272.1.3.2.1.26
When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier.
OBJECT-TYPE    
  INTEGER  

rcVlanIgmpSnoopActiveMRouterPorts 1.3.6.1.4.1.2272.1.3.2.1.27
Active ports.
OBJECT-TYPE    
  PortSet  

rcVlanProtocolIds 1.3.6.1.4.1.2272.1.3.2.1.28
Bitfield of protocol ids.
OBJECT-TYPE    
  INTEGER  

rcVlanIgmpSnoopActiveQuerier 1.3.6.1.4.1.2272.1.3.2.1.29
IP address of multicast querier router.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopMRouterExpiration 1.3.6.1.4.1.2272.1.3.2.1.30
Multicast querier router aging time out.
OBJECT-TYPE    
  INTEGER  

rcVlanIgmpSnoopQuerierPort 1.3.6.1.4.1.2272.1.3.2.1.31
The port on which the multicast querier router was heard.
OBJECT-TYPE    
  InterfaceIndex  

rcVlanUserPriority 1.3.6.1.4.1.2272.1.3.2.1.32
User priority level.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcVlanQosLevel 1.3.6.1.4.1.2272.1.3.2.1.33
Used to specify the Qos level packets, carried in this VLAN, should be processed with.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcVlanTosValue 1.3.6.1.4.1.2272.1.3.2.1.34
Tos value.
OBJECT-TYPE    
  INTEGER 1..64  

rcVlanPortTable 1.3.6.1.4.1.2272.1.3.3
A table used to maintain VLAN port related information.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanPortEntry

rcVlanPortEntry 1.3.6.1.4.1.2272.1.3.3.1
Entry containing VLAN information regarding a particular port.
OBJECT-TYPE    
  RcVlanPortEntry  

rcVlanPortIndex 1.3.6.1.4.1.2272.1.3.3.1.1
An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port.
OBJECT-TYPE    
  INTEGER  

rcVlanPortNumVlanIds 1.3.6.1.4.1.2272.1.3.3.1.2
Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable.
OBJECT-TYPE    
  INTEGER  

rcVlanPortVlanIds 1.3.6.1.4.1.2272.1.3.3.1.3
An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID.
OBJECT-TYPE    
  IdList SIZE(4096)  

rcVlanPortType 1.3.6.1.4.1.2272.1.3.3.1.4
The type of port: access(1) or trunk(2).
OBJECT-TYPE    
  INTEGER access(1), trunk(2)  

rcVlanPortDiscardTaggedFrames 1.3.6.1.4.1.2272.1.3.3.1.5
A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are processed normally. This field is meaningless when the port is not an access port and should be set to false(2).
OBJECT-TYPE    
  TruthValue  

rcVlanPortDiscardUntaggedFrames 1.3.6.1.4.1.2272.1.3.3.1.6
A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are assigned to the VLAN specified by rcVlanPortDefaultVlanId. This field is meaningless when the port is not a trunk port and should be set to false(2).
OBJECT-TYPE    
  TruthValue  

rcVlanPortDefaultVlanId 1.3.6.1.4.1.2272.1.3.3.1.7
The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port.
OBJECT-TYPE    
  INTEGER 0..4094  

rcVlanPortPerformTagging 1.3.6.1.4.1.2272.1.3.3.1.8
Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic.
OBJECT-TYPE    
  TruthValue  

rcVlanMacTable 1.3.6.1.4.1.2272.1.3.4
A table used to maintain MAC addresses assigned to a particular VLAN by MAC address.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanMacEntry

rcVlanMacEntry 1.3.6.1.4.1.2272.1.3.4.1
Entry containing VLAN information regarding a particular port.
OBJECT-TYPE    
  RcVlanMacEntry  

rcVlanMacVlanId 1.3.6.1.4.1.2272.1.3.4.1.1
An unique index used to identify a VLAN (by MAC address) in the system.
OBJECT-TYPE    
  INTEGER  

rcVlanMacAddr 1.3.6.1.4.1.2272.1.3.4.1.2
An unique index used to identify a MAC address assigned to a particular VLAN.
OBJECT-TYPE    
  MacAddress  

rcVlanMacRowStatus 1.3.6.1.4.1.2272.1.3.4.1.3
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

rcVlanIgmpSnoopNumGroups 1.3.6.1.4.1.2272.1.3.5
The number of entries (rows) in the rcVlanIgmpSnoopTable.
OBJECT-TYPE    
  INTEGER  

rcVlanIgmpSnoopTable 1.3.6.1.4.1.2272.1.3.6
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast receivers). A row is created by the system when it receives an IGMP Join messages on a port.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanIgmpSnoopEntry

rcVlanIgmpSnoopEntry 1.3.6.1.4.1.2272.1.3.6.1
An entry (row) in the rcVlanIgmpSnoopTable.
OBJECT-TYPE    
  RcVlanIgmpSnoopEntry  

rcVlanIgmpSnoopVlanId 1.3.6.1.4.1.2272.1.3.6.1.1
The VLAN for which this entry contains information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcVlanIgmpSnoopIpAddress 1.3.6.1.4.1.2272.1.3.6.1.2
The IP multicast group address for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopIfIndex 1.3.6.1.4.1.2272.1.3.6.1.3
The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received).
OBJECT-TYPE    
  InterfaceIndex  

rcVlanIgmpSnoopMember 1.3.6.1.4.1.2272.1.3.6.1.4
The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the Join message).
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopExpiration 1.3.6.1.4.1.2272.1.3.6.1.5
The minimum amount of time remaining before this entry will be aged out.
OBJECT-TYPE    
  INTEGER  

rcVlanIgmpSnoopType 1.3.6.1.4.1.2272.1.3.6.1.6
The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management.
OBJECT-TYPE    
  INTEGER dynamic(1), static(2), blocked(3)  

rcVlanIgmpSnoopStaticTable 1.3.6.1.4.1.2272.1.3.7
The (conceptual) table listing the statically- defined IP multicast groups for which there are members on a particular interface on a particular VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanIgmpSnoopStaticEntry

rcVlanIgmpSnoopStaticEntry 1.3.6.1.4.1.2272.1.3.7.1
An entry (row) in the rcVlanIgmpSnoopStaticTable.
OBJECT-TYPE    
  RcVlanIgmpSnoopStaticEntry  

rcVlanIgmpSnoopStaticVlanId 1.3.6.1.4.1.2272.1.3.7.1.1
The VLAN for which this entry contains information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcVlanIgmpSnoopStaticIpAddress 1.3.6.1.4.1.2272.1.3.7.1.2
The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopStaticMemberPorts 1.3.6.1.4.1.2272.1.3.7.1.3
The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to.
OBJECT-TYPE    
  PortSet  

rcVlanIgmpSnoopStaticRowStatus 1.3.6.1.4.1.2272.1.3.7.1.4
Used to create/delete entries in the rcVlanIgmpSnoopStaticTable.
OBJECT-TYPE    
  RowStatus  

rcVlanIgmpSnoopStaticNotAllowedToJoin 1.3.6.1.4.1.2272.1.3.7.1.5
Not allowed to join
OBJECT-TYPE    
  PortSet  

rcVlanIgmpSnoopAccessTable 1.3.6.1.4.1.2272.1.3.8
Table used to specify which host(s) can send and/or receive IP Multicast traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanIgmpSnoopAccessEntry

rcVlanIgmpSnoopAccessEntry 1.3.6.1.4.1.2272.1.3.8.1
An entry (row) in the rcVlanIgmpSnoopAccessTable.
OBJECT-TYPE    
  RcVlanIgmpSnoopAccessEntry  

rcVlanIgmpSnoopAccessVlanId 1.3.6.1.4.1.2272.1.3.8.1.1
The VLAN for which this entry contains information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcVlanIgmpSnoopAccessGrpAddr 1.3.6.1.4.1.2272.1.3.8.1.2
The IP multicast group address for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopAccessHostAddr 1.3.6.1.4.1.2272.1.3.8.1.3
The IP address of a host for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopAccessHostMask 1.3.6.1.4.1.2272.1.3.8.1.4
The IP netmask of a host for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopAccessMode 1.3.6.1.4.1.2272.1.3.8.1.5
Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both.
OBJECT-TYPE    
  INTEGER denyTx(1), denyRx(2), denyBoth(3)  

rcVlanIgmpSnoopAccessRowStatus 1.3.6.1.4.1.2272.1.3.8.1.6
Row status
OBJECT-TYPE    
  RowStatus  

rcVlanIgmpSnoopSenderTable 1.3.6.1.4.1.2272.1.3.9
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast senders). A row is created by the system when it receives an IGMP Join messages on a port.
OBJECT-TYPE    
  SEQUENCE OF  
    RcVlanIgmpSnoopSenderEntry

rcVlanIgmpSnoopSenderEntry 1.3.6.1.4.1.2272.1.3.9.1
An entry (row) in the rcVlanIgmpSnoopSenderTable.
OBJECT-TYPE    
  RcVlanIgmpSnoopSenderEntry  

rcVlanIgmpSnoopSenderVlanId 1.3.6.1.4.1.2272.1.3.9.1.1
The VLAN for which this entry contains information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcVlanIgmpSnoopSenderIpAddress 1.3.6.1.4.1.2272.1.3.9.1.2
The IP multicast group address for which this entry contains information.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopSenderIfIndex 1.3.6.1.4.1.2272.1.3.9.1.3
The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received).
OBJECT-TYPE    
  InterfaceIndex  

rcVlanIgmpSnoopSenderMember 1.3.6.1.4.1.2272.1.3.9.1.4
The IP Address of the host sending the multicast traffic.
OBJECT-TYPE    
  IpAddress  

rcVlanIgmpSnoopSenderAction 1.3.6.1.4.1.2272.1.3.9.1.5
Used to specify an action to perform on this group.
OBJECT-TYPE    
  INTEGER none(0), flushEntry(1), flushGrp(2)  

rcChassis 1.3.6.1.4.1.2272.1.4
OBJECT IDENTIFIER    

rcChasType 1.3.6.1.4.1.2272.1.4.1
Chassis Type
OBJECT-TYPE    
  INTEGER unknown(1), a1100(2), a1250(6), a1150(7), a1200(8), a1050(9), a8006(280887558), a8010(280887562), a8010co(1623064842), a8003(280887555)  

rcChasSerialNumber 1.3.6.1.4.1.2272.1.4.2
Unique serial number for this chassis.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcChasHardwareRevision 1.3.6.1.4.1.2272.1.4.3
Device hardware revision level
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcChasNumSlots 1.3.6.1.4.1.2272.1.4.4
The number of slots in the chassis available for plug-in cards.
OBJECT-TYPE    
  INTEGER 1..16  

rcChasNumPorts 1.3.6.1.4.1.2272.1.4.5
The total number of ports currently installed in the chassis.
OBJECT-TYPE    
  INTEGER 0..255  

rcChasTestResult 1.3.6.1.4.1.2272.1.4.6
Chassis start-up diagnostic tests.
OBJECT-TYPE    
  INTEGER other(1), ok(2), crceeprom(3), timer(4), procdram(5), led(6), formaccpuaccess(7), asiccpuaccess(8), memory(9), loopback(10)  

rcChasFan 1.3.6.1.4.1.2272.1.4.7
OBJECT IDENTIFIER    

rcChasFanTable 1.3.6.1.4.1.2272.1.4.7.1
This table contains information about Fans
OBJECT-TYPE    
  SEQUENCE OF  
    RcChasFanEntry

rcChasFanEntry 1.3.6.1.4.1.2272.1.4.7.1.1
Contains information regarding a Fan Unit
OBJECT-TYPE    
  RcChasFanEntry  

rcChasFanId 1.3.6.1.4.1.2272.1.4.7.1.1.1
OBJECT-TYPE    
  INTEGER 1..4  

rcChasFanOperStatus 1.3.6.1.4.1.2272.1.4.7.1.1.2
Actual status of the Fan: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

rcChasFanAmbientTemperature 1.3.6.1.4.1.2272.1.4.7.1.1.3
Used to indicate the temperature of the air entering the fan.
OBJECT-TYPE    
  Gauge32  

rcChasPowerSupply 1.3.6.1.4.1.2272.1.4.8
OBJECT IDENTIFIER    

rcChasPowerSupplyTable 1.3.6.1.4.1.2272.1.4.8.1
This table contains information about power supplies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcChasPowerSupplyEntry

rcChasPowerSupplyEntry 1.3.6.1.4.1.2272.1.4.8.1.1
Contains information regarding a power supply unit.
OBJECT-TYPE    
  RcChasPowerSupplyEntry  

rcChasPowerSupplyId 1.3.6.1.4.1.2272.1.4.8.1.1.1
OBJECT-TYPE    
  INTEGER 1..3  

rcChasPowerSupplyOperStatus 1.3.6.1.4.1.2272.1.4.8.1.1.2
Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power. - down(4) - present, but failure indicated.
OBJECT-TYPE    
  INTEGER unknown(1), empty(2), up(3), down(4)  

rcChasPowerSupplyDetailTable 1.3.6.1.4.1.2272.1.4.8.2
This table contains detailed information about power supplies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcChasPowerSupplyDetailEntry

rcChasPowerSupplyDetailEntry 1.3.6.1.4.1.2272.1.4.8.2.1
Contains detailed info regarding a power supply unit.
OBJECT-TYPE    
  RcChasPowerSupplyDetailEntry  

rcChasPowerSupplyDetailId 1.3.6.1.4.1.2272.1.4.8.2.1.1
OBJECT-TYPE    
  INTEGER 1..3  

rcChasPowerSupplyDetailType 1.3.6.1.4.1.2272.1.4.8.2.1.2
OBJECT-TYPE    
  INTEGER unknown(0), ac(1), dc(2)  

rcChasPowerSupplyDetailSerialNumber 1.3.6.1.4.1.2272.1.4.8.2.1.3
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcChasPowerSupplyDetailHardwareRevision 1.3.6.1.4.1.2272.1.4.8.2.1.4
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcChasPowerSupplyDetailPartNumber 1.3.6.1.4.1.2272.1.4.8.2.1.5
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

rcChasPowerSupplyDetailDescription 1.3.6.1.4.1.2272.1.4.8.2.1.6
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcCard 1.3.6.1.4.1.2272.1.4.9
OBJECT IDENTIFIER    

rcCardTable 1.3.6.1.4.1.2272.1.4.9.1
A table that contains information about the cards in this chassis. For those slots that do not contain a physical card, the table may be implemented to contain a conceptual row with the type of physical module set to 'chasCardEmpty', or it may be implemented to have no conceptual row instance.
OBJECT-TYPE    
  SEQUENCE OF  
    RcCardEntry

rcCardEntry 1.3.6.1.4.1.2272.1.4.9.1.1
Card attributes
OBJECT-TYPE    
  RcCardEntry  

rcCardIndex 1.3.6.1.4.1.2272.1.4.9.1.1.1
A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the value of rcChasNumSlots
OBJECT-TYPE    
  INTEGER 1..8  

rcCardType 1.3.6.1.4.1.2272.1.4.9.1.1.2
Used to indicate a card types in the Accelar 1000 product families. For Accelar 1000 devices, gigabit cards use an encoded value according to the following rule: +-----+--+-+---+---+---+ bits : |31-11|10|9|8-7|6-4|3-0| +-----+--+-+---+---+---+ field : | a | b|c| d | e | f | +-----+--+-+---+---+---+ a : not-used b : 1=gigabit c : 0=non-redundant, 1=redundant d : 0=short-haul, 1=long-haul, 2=extra-distance, e : 0=work-group(a1100 & a1150) 1=back-bone(a1200 & f1250 & f2000), f : 1=1-port, 2=2-port, 4=4-port, 8=8-port
OBJECT-TYPE    
  INTEGER other(1), rcCPU(2), rc8x100BaseTX(3), rc8x100BaseT2(4), rc8x100BaseF(5), rc16x100BaseTX(6), rc8x100BaseTXWG(12), rc16x100BaseTXWG(13), rc4x100BaseFWG(14), rc12x100BaseTXWG(15), rc12x100BaseFBB(16), rc8x100BaseFWG(17), rc12x100BaseTX-2x100BaseFBB(18), rc2x155BaseFBB(19), rc4x155BaseFBB(20), rc16x100BaseFBB(21), rc14x100BaseTX-2x100BaseFBB(22), rc8x10BaseFBB(23), rc4xOC3(24), rc1xOC12(25), rcRMON(26), rc1xOC12POSBaseMMF(27), rc1xOC12POSBaseSMF(28), rc4x1000BaseSXWG(1028), rc1x1000BaseSXWG(1025), rc2x1000BaseSXWG(1026), rc1x1000BaseSXRWG(1537), rc2x1000BaseSXRWG(1538), rc1x1000BaseLXWG(1153), rc2x1000BaseLXWG(1154), rc2x1000BaseXDWG(1282), rc1x1000BaseLXRWG(1665), rc2x1000BaseLXRWG(1666), rc1x1000BaseSXBB(1041), rc2x1000BaseSXBB(1042), rc1x1000BaseSXRBB(1553), rc2x1000BaseSXRBB(1554), rc1x1000BaseLXBB(1169), rc2x1000BaseLXBB(1170), rc2x1000BaseXDBB(1298), rc1x1000BaseLXRBB(1681), rc2x1000BaseLXRBB(1682)  

rcCardSerialNumber 1.3.6.1.4.1.2272.1.4.9.1.1.3
Unique serial number for this card.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcCardHardwareRevision 1.3.6.1.4.1.2272.1.4.9.1.1.4
Hardware Version
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcCardAdminStatus 1.3.6.1.4.1.2272.1.4.9.1.1.5
Used to indicate the administrative status of this card
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

rcCardOperStatus 1.3.6.1.4.1.2272.1.4.9.1.1.6
Used to indicate the operational status of this card.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5)  

rcCardPCMCIAType 1.3.6.1.4.1.2272.1.4.9.1.1.7
Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none.
OBJECT-TYPE    
  INTEGER none(1), modem28kbs(2), flash2meg(3), flash4meg(4)  

rcCardPartNumber 1.3.6.1.4.1.2272.1.4.9.1.1.8
Card Part Number
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

rcPort 1.3.6.1.4.1.2272.1.4.10
OBJECT IDENTIFIER    

rcPortTable 1.3.6.1.4.1.2272.1.4.10.1
Port table
OBJECT-TYPE    
  SEQUENCE OF  
    RcPortEntry

rcPortEntry 1.3.6.1.4.1.2272.1.4.10.1.1
Entry containing info. for a particular port
OBJECT-TYPE    
  RcPortEntry  

rcPortIndex 1.3.6.1.4.1.2272.1.4.10.1.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
OBJECT-TYPE    
  InterfaceIndex  

rcPortType 1.3.6.1.4.1.2272.1.4.10.1.1.2
Port type
OBJECT-TYPE    
  INTEGER other(0), rc100BaseTX(1), rc100BaseT2(2), rc100BaseF(3), rc1000BaseF(4), rc1000BaseDualF(5), rc10BaseF(6), rcPosMMF(7), rcPosSMF(8), rcAtm(9), rcGbicLx(10), rcGbicSx(11), rcGbicXd(12), rcGbicCu(13), rcGbicOther(14), rcOc3cSM(15), rcOc3cMM(16), rcOc3cCOPPER(17), rcOc12cSM(18), rcOc12cMM(19), rcDs3(20), rcE3(21), rcGbicNone(22), rc1000BaseT(23), rcGbicZx(24), rcOc3cAtmSM(25), rcOc3cAtmMM(26), rcOc12cAtmSM(27), rcOc12cAtmMM(28), rcOc3cPosSM(29), rcOc3cPosMM(30), rcOc12cPosSM(31), rcOc12cPosMM(32), rcGbic1470(33), rcGbic1490(34), rcGbic1510(35), rcGbic1530(36), rcGbic1550(37), rcGbic1570(38), rcGbic1590(39), rcGbic1610(40), rcRmon(41), rcGbic1470APD(42), rcGbic1490APD(43), rcGbic1510APD(44), rcGbic1530APD(45), rcGbic1550APD(46), rcGbic1570APD(47), rcGbic1590APD(48), rcGbic1610APD(49)  

rcPortConnectorType 1.3.6.1.4.1.2272.1.4.10.1.1.3
Type of connector installed on this port.
OBJECT-TYPE    
  INTEGER nonRedundant(1), redundant(2)  

rcPortPerformRouting 1.3.6.1.4.1.2272.1.4.10.1.1.4
Indicate whether this port should perform routing
OBJECT-TYPE    
  TruthValue  

rcPortHighPriority 1.3.6.1.4.1.2272.1.4.10.1.1.5
Indicate whether this port should be treated with high priority
OBJECT-TYPE    
  TruthValue  

rcPortAction 1.3.6.1.4.1.2272.1.4.10.1.1.6
Port related actions.
OBJECT-TYPE    
  INTEGER none(1), flushMacFdb(2), flushArp(3), flushIp(4), flushAll(5), triggerRipUpdate(6)  

rcPortResult 1.3.6.1.4.1.2272.1.4.10.1.1.7
Result from the last Vlan action.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4)  

rcPortPrimaryConnector 1.3.6.1.4.1.2272.1.4.10.1.1.8
For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up.
OBJECT-TYPE    
  INTEGER left(1), right(2), other(3)  

rcPortActiveConnector 1.3.6.1.4.1.2272.1.4.10.1.1.9
For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime.
OBJECT-TYPE    
  INTEGER left(1), right(2), other(3)  

rcPortBackupConnectorStatus 1.3.6.1.4.1.2272.1.4.10.1.1.10
Indicate the status of the link attached to the back-up (non-active) connector.
OBJECT-TYPE    
  INTEGER up(1), down(2), other(3)  

rcPortAutoNegotiate 1.3.6.1.4.1.2272.1.4.10.1.1.11
Indicate whether this port enabled for auto negotiations or not.
OBJECT-TYPE    
  TruthValue  

rcPortAdminDuplex 1.3.6.1.4.1.2272.1.4.10.1.1.12
Indicates the port duplex type
OBJECT-TYPE    
  INTEGER half(1), full(2)  

rcPortOperDuplex 1.3.6.1.4.1.2272.1.4.10.1.1.13
Indicate this port's current duplex value.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

rcPortAdminSpeed 1.3.6.1.4.1.2272.1.4.10.1.1.14
Indicate this port's speed.
OBJECT-TYPE    
  INTEGER none(0), mbps10(1), mbps100(2)  

rcPortOperSpeed 1.3.6.1.4.1.2272.1.4.10.1.1.15
Indicate this port's current speed value.
OBJECT-TYPE    
  INTEGER  

rcPortMltId 1.3.6.1.4.1.2272.1.4.10.1.1.16
Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).
OBJECT-TYPE    
  INTEGER  

rcPortLocked 1.3.6.1.4.1.2272.1.4.10.1.1.17
Indicate whether this port is locked.
OBJECT-TYPE    
  TruthValue  

rcPortAutoNegotiationSupported 1.3.6.1.4.1.2272.1.4.10.1.1.18
Indicate whether this port can support auto-negotiation.
OBJECT-TYPE    
  TruthValue  

rcPortSingleRoutablePort 1.3.6.1.4.1.2272.1.4.10.1.1.19
Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.
OBJECT-TYPE    
  TruthValue  

rcPortUnknownMacDiscard 1.3.6.1.4.1.2272.1.4.10.1.1.20
If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For example, suppose 11:22:33:44:55:66 is an unknown source MAC, packets with source MAC 11:22:33:44:55 coming from this port is discarded, further more, packets with destination MAC 11:22:33:44:55:66 coming from other ports are also discarded, unless this address is later learned on another port or the restriction ages out.
OBJECT-TYPE    
  TruthValue  

rcPortNumStateTransition 1.3.6.1.4.1.2272.1.4.10.1.1.21
# state transitions.
OBJECT-TYPE    
  Counter  

rcPortUserPriority 1.3.6.1.4.1.2272.1.4.10.1.1.22
User priority level.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcPortAllowOversizeFrame 1.3.6.1.4.1.2272.1.4.10.1.1.23
Used to specify whether over-size frames should be processed or dropped.
OBJECT-TYPE    
  TruthValue  

rcPortQosLevel 1.3.6.1.4.1.2272.1.4.10.1.1.30
Used to specify the Qos level packets, carried on this port, should be processed with.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcPortDiffServEnable 1.3.6.1.4.1.2272.1.4.10.1.1.31
Used to enable/disable the Differentiated Service feature on this port.
OBJECT-TYPE    
  TruthValue  

rcPortDiffServType 1.3.6.1.4.1.2272.1.4.10.1.1.32
Used to specify the Differentiated Service type for this port.
OBJECT-TYPE    
  INTEGER none(0), access(1), core(2)  

rcPortDiffServIeee8021POverrideEnable 1.3.6.1.4.1.2272.1.4.10.1.1.33
Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature.
OBJECT-TYPE    
  TruthValue  

rcPortVendorDescr 1.3.6.1.4.1.2272.1.4.10.1.1.34
Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.
OBJECT-TYPE    
  DisplayString SIZE(16)  

rcPortName 1.3.6.1.4.1.2272.1.4.10.1.1.35
This port's name.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcPortOctapidId 1.3.6.1.4.1.2272.1.4.10.1.1.36
The octapid id of the mirrored port.
OBJECT-TYPE    
  INTEGER  

rcPortLock 1.3.6.1.4.1.2272.1.4.11
OBJECT IDENTIFIER    

rcPortLockEnable 1.3.6.1.4.1.2272.1.4.11.1
Indicate whether the port lock feature is enabled.
OBJECT-TYPE    
  TruthValue  

rcPortLockLockedPorts 1.3.6.1.4.1.2272.1.4.11.2
The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first.
OBJECT-TYPE    
  PortSet  

rcChasAruMode 1.3.6.1.4.1.2272.1.4.12
The ARU mode the chassis is operating in.
OBJECT-TYPE    
  INTEGER aruOne(1), aruTwo(2), aruThree(3)  

rcChasQuidMode 1.3.6.1.4.1.2272.1.4.13
The Quid mode the chassis is operating in.
OBJECT-TYPE    
  INTEGER quidMixed(1), quidTwo(2), quidThree(3), quidFour(4), quidFive(5)  

rcChasEocModeAdminStatus 1.3.6.1.4.1.2272.1.4.14
Used to specify the Enforce Operational Configuration Mode(EOC) of the system. When a device is configured with hardware of different revisions, the system will initialize in some deterministic manner (e.g., the lowest common denominator that makes sense based on the hardware configuration). This is the 'default(0)' mode. The user can override this behavior by manually specifying the EOC Mode they would like.
OBJECT-TYPE    
  INTEGER default(0), aru1Quid4(1), aru2Quid4(2), aru2Quid5(3), aru3Quid4(4), aru3Quid5(5)  

rcChasEocModeOperStatus 1.3.6.1.4.1.2272.1.4.15
Used to indicate the Enforce Operational Configuration Mode(EOC) of the system.
OBJECT-TYPE    
  INTEGER default(0), aru1Quid4(1), aru2Quid4(2), aru2Quid5(3), aru3Quid4(4), aru3Quid5(5)  

rcAgentTable 1.3.6.1.4.1.2272.1.4.16
Agents in a chassis table
OBJECT-TYPE    
  SEQUENCE OF  
    RcAgentEntry

rcAgentEntry 1.3.6.1.4.1.2272.1.4.16.1
Entry containing info. for a particular agent
OBJECT-TYPE    
  RcAgentEntry  

rcAgentId 1.3.6.1.4.1.2272.1.4.16.1.1
entry id
OBJECT-TYPE    
  INTEGER  

rcAgentSlot 1.3.6.1.4.1.2272.1.4.16.1.2
slot agent is in.
OBJECT-TYPE    
  INTEGER  

rcAgentIpAddr 1.3.6.1.4.1.2272.1.4.16.1.3
agent's ip address.
OBJECT-TYPE    
  IpAddress  

rcChasBrouterPorts 1.3.6.1.4.1.2272.1.4.17
Used to indicate which ports in the system are configured as Brouter ports.
OBJECT-TYPE    
  PortSet  

rcChasGlobalFilterEnable 1.3.6.1.4.1.2272.1.4.18
Used to enable/disable global filters in the system. This variable is currently not supported.
OBJECT-TYPE    
  TruthValue  

rcChasVlanBySrcMacEnable 1.3.6.1.4.1.2272.1.4.19
Used to enable/disable source MAC based VLANs in the system.
OBJECT-TYPE    
  TruthValue  

rcChasDiffServEcnCompatibilityEnable 1.3.6.1.4.1.2272.1.4.20
Used to enable/disable the Explicit Congestion Notification(ECN) compatibility feature. When set to FALSE , the system will mask the ECN bits in the DS field while re-marking DSCP and will not match on ECN capable flows if filter is set on DSmatch. When set to TRUE, it will preserve the ECN bits in the DS field while re-marking and will match on full 8-bit DS field.
OBJECT-TYPE    
  TruthValue  

rcMirror 1.3.6.1.4.1.2272.1.5
OBJECT IDENTIFIER    

rcMirrorSaveConfig 1.3.6.1.4.1.2272.1.5.1
Control whether Mirror configuration information should be saved to NVRAM so mirror settings can be automatically reinstalled after a system reboot. Setting rcMirrorSaveConfig to true does not immediately save the configuration information. The save happens when the rcSysAction variable is set to 'saveToNVRAM(4)'.
OBJECT-TYPE    
  TruthValue  

rcMirrorByPort 1.3.6.1.4.1.2272.1.5.2
OBJECT IDENTIFIER    

rcMirrorByPortEnable 1.3.6.1.4.1.2272.1.5.2.1
Used to indicate whether the mirror by port feature is active. The system can only support mirroring on two ports. When this feature is active, all packets received on the port(s) specified by rcMirrorSrcPortOne and/or rcMirrorSrcPortTwo are copied to rcMirrorDstPort. The mirroring operation is non-intrusive.
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirrorPort 1.3.6.1.4.1.2272.1.5.2.2
The ifIndex of the port to forward mirrored frames to.
OBJECT-TYPE    
  InterfaceIndex  

rcMirrorByPortEnableMirroredPortOne 1.3.6.1.4.1.2272.1.5.2.3
Used to indicate whether the port specified in rcMirrorByPortMirroredPortOne should be mirrored.
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirroredPortOne 1.3.6.1.4.1.2272.1.5.2.4
The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port.
OBJECT-TYPE    
  InterfaceIndex  

rcMirrorByPortEnableMirroredPortTwo 1.3.6.1.4.1.2272.1.5.2.5
Used to indicate whether the port specified in rcMirrorByPortMirroredPortTwo should be mirrored.
OBJECT-TYPE    
  TruthValue  

rcMirrorByPortMirroredPortTwo 1.3.6.1.4.1.2272.1.5.2.6
The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port.
OBJECT-TYPE    
  InterfaceIndex  

rcDipSwitch 1.3.6.1.4.1.2272.1.6
OBJECT IDENTIFIER    

rcIsolateUnconfigPorts 1.3.6.1.4.1.2272.1.6.1
Used to indicate whether ports that are unconfigured should be assigned to the 'isolated' VLAN. Ports assigned to the 'isolated' VLAN can only communicate with the CP port. If this option is not specified, unconfigured ports will be assigned to the 'default' VLAN
OBJECT-TYPE    
  TruthValue  

rcUseFactorySettings 1.3.6.1.4.1.2272.1.6.2
Used to indicate whether the system should ignore the configuration information stored in NVRAM when the system is booted.
OBJECT-TYPE    
  TruthValue  

rcHighPriorityMode 1.3.6.1.4.1.2272.1.6.3
Used to indicate whether the system is configured to operate in a high priority mode. The switch can operate in either a 'best effort' or 'high priority' mode. In the 'best effort' setting, the maximum queue thresholds for the QUIDs are set to 768/768 buffers. In the 'high priority' mode the setting is 512/768. This means that in 'high priority' mode the normal priority queue can't have more than 512 buffers, while the high priority queue can have up to 768.
OBJECT-TYPE    
  TruthValue  

rcTblSize 1.3.6.1.4.1.2272.1.7
OBJECT IDENTIFIER    

rcTblRmonStatSize 1.3.6.1.4.1.2272.1.7.1
Used to indicate the current size of the RMON Statistic table.
OBJECT-TYPE    
  INTEGER  

rcTblRmonHistoryControlSize 1.3.6.1.4.1.2272.1.7.2
Used to indicate the current size of the RMON History Control table.
OBJECT-TYPE    
  INTEGER  

rcTblRmonHistoryEnetSize 1.3.6.1.4.1.2272.1.7.3
Used to indicate the current size of the RMON History Ethernet table.
OBJECT-TYPE    
  INTEGER  

rcTblRmonAlarmSize 1.3.6.1.4.1.2272.1.7.4
Used to indicate the current size of the RMON Alarm table.
OBJECT-TYPE    
  INTEGER  

rcTblRmonEventSize 1.3.6.1.4.1.2272.1.7.5
Used to indicate the current size of the RMON Event table.
OBJECT-TYPE    
  INTEGER  

rcTblRmonLogSize 1.3.6.1.4.1.2272.1.7.6
Used to indicate the current size of the RMON Log table.
OBJECT-TYPE    
  INTEGER  

rcTblArTblSize 1.3.6.1.4.1.2272.1.7.7
Used to indicate the size of the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArFree 1.3.6.1.4.1.2272.1.7.8
Used to indicate the number of free entries that are available in the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArNoSpace 1.3.6.1.4.1.2272.1.7.9
Used to indicate the number of entries that could not be added to the Address Translation (AR) table due to lack of space.
OBJECT-TYPE    
  INTEGER  

rcTblArAdded 1.3.6.1.4.1.2272.1.7.10
Used to indicate the number of entries added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArDeleted 1.3.6.1.4.1.2272.1.7.11
Used to indicate the number of entries deleted to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArMacAdded 1.3.6.1.4.1.2272.1.7.12
Used to indicate the number of MAC entries added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArMacDeleted 1.3.6.1.4.1.2272.1.7.13
Used to indicate the number of MAC entries deleted to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArMacMoved 1.3.6.1.4.1.2272.1.7.14
Used to indicate the number of MAC entries moved in the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpAdded 1.3.6.1.4.1.2272.1.7.15
Used to indicate the number of IP entries added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpDeleted 1.3.6.1.4.1.2272.1.7.16
Used to indicate the number of IP entries deleted to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArMcastTblSize 1.3.6.1.4.1.2272.1.7.17
Used to indicate the size of the Multicast Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArFreeMcastGroups 1.3.6.1.4.1.2272.1.7.18
Used to indicate the number of free multicast groups availabe in the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpMcastAdded 1.3.6.1.4.1.2272.1.7.19
Used to indicate the number of Ip multicast entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpMcastDeleted 1.3.6.1.4.1.2272.1.7.20
Used to indicate the number of Ip multicast entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByPortAdded 1.3.6.1.4.1.2272.1.7.21
Used to indicate the number of VLAN by port entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByPortDeleted 1.3.6.1.4.1.2272.1.7.22
Used to indicate the number of VLAN by port entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByProtocolAdded 1.3.6.1.4.1.2272.1.7.23
Used to indicate the number of Vlans by Protocol Type entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByProtocolDeleted 1.3.6.1.4.1.2272.1.7.24
Used to indicate the number of Vlans by Protocol Type entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByIpSubnetAdded 1.3.6.1.4.1.2272.1.7.25
Used to indicate the number of VLAN by Ip entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArVlanByIpSubnetDeleted 1.3.6.1.4.1.2272.1.7.26
Used to indicate the number of VLAN by Ip entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpSubnetsAdded 1.3.6.1.4.1.2272.1.7.27
Used to indicate the number of Ip subnet entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArIpSubnetsDeleted 1.3.6.1.4.1.2272.1.7.28
Used to indicate the number of Ip subnet entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArRsvpsAdded 1.3.6.1.4.1.2272.1.7.29
Used to indicate the number of RSVP entries that are added to the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblArRsvpsDeleted 1.3.6.1.4.1.2272.1.7.30
Used to indicate the number of RSVP entries that are deleted from the Address Translation (AR) table.
OBJECT-TYPE    
  INTEGER  

rcTblBrdgFdbSize 1.3.6.1.4.1.2272.1.7.31
Used to indicate the number of entries in the dot1d forwarding database table.
OBJECT-TYPE    
  INTEGER  

rcTblBrdgStaticSize 1.3.6.1.4.1.2272.1.7.32
Used to indicate the number of entries in the dot1d Static Address Filtering table.
OBJECT-TYPE    
  INTEGER  

rcTblIpAddrSize 1.3.6.1.4.1.2272.1.7.33
Used to indicate the number of entries in the IP Address table.
OBJECT-TYPE    
  INTEGER  

rcTblIpForwardingSize 1.3.6.1.4.1.2272.1.7.34
Used to indicate the number of entries in the IP Forwarding/Best Route table.
OBJECT-TYPE    
  INTEGER  

rcTblIpNetToMediaSize 1.3.6.1.4.1.2272.1.7.35
Used to indicate the number of entries in the IP Net-to-media table.
OBJECT-TYPE    
  INTEGER  

rcTblIpBestPlusAltRouteSize 1.3.6.1.4.1.2272.1.7.36
OBJECT-TYPE    
  INTEGER  

rcTblIpBestPathSize 1.3.6.1.4.1.2272.1.7.37
OBJECT-TYPE    
  INTEGER  

rcTblIpBestPlusAltPathSize 1.3.6.1.4.1.2272.1.7.38
OBJECT-TYPE    
  INTEGER  

rcIp 1.3.6.1.4.1.2272.1.8
OBJECT IDENTIFIER    

rcIpConf 1.3.6.1.4.1.2272.1.8.1
OBJECT IDENTIFIER    

rcIpConfTable 1.3.6.1.4.1.2272.1.8.1.1
A table used to maintain IP routing information for a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfEntry

rcIpConfEntry 1.3.6.1.4.1.2272.1.8.1.1.1
Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpConfEntry  

rcIpConfIfIndex 1.3.6.1.4.1.2272.1.8.1.1.1.1
An unique value to identify a physical interface or a logical interface (VLAN).
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcIpConfAdvertDefRte 1.3.6.1.4.1.2272.1.8.1.1.1.2
Used to indicate whether this interface should advertize a RIP default route.
OBJECT-TYPE    
  TruthValue  

rcIpConfAcceptDefRte 1.3.6.1.4.1.2272.1.8.1.1.1.3
Used to indicate whether this interface should accept a RIP default route.
OBJECT-TYPE    
  TruthValue  

rcIpConfRowStatus 1.3.6.1.4.1.2272.1.8.1.1.1.4
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

rcIpConfRipEnable 1.3.6.1.4.1.2272.1.8.1.1.1.5
Enable or disable RIP routing on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfOspfEnable 1.3.6.1.4.1.2272.1.8.1.1.1.6
Enable or disable OSPF routing on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfIgmpEnable 1.3.6.1.4.1.2272.1.8.1.1.1.7
Enable or disable IGMP on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfAddrAssigned 1.3.6.1.4.1.2272.1.8.1.1.1.8
Indicate whether IpAddress has been assigned for this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfDhcpEnable 1.3.6.1.4.1.2272.1.8.1.1.1.9
Enable or disable DHCP on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfTriggeredUpdateEnable 1.3.6.1.4.1.2272.1.8.1.1.1.10
Used to indicate whether the RIP triggered update feature should be enabled on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfAutoAggrerateEnable 1.3.6.1.4.1.2272.1.8.1.1.1.11
Used to indicate whether the auto aggregation feature should be enabled on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfGenerateDefaultRoute 1.3.6.1.4.1.2272.1.8.1.1.1.12
Used to indicate whether to generate a default RIP route on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfAdvertiseWhenDown 1.3.6.1.4.1.2272.1.8.1.1.1.13
The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state.
OBJECT-TYPE    
  TruthValue  

rcIpConfDirectBroadcastEnable 1.3.6.1.4.1.2272.1.8.1.1.1.14
Used to indicate whether this interface should forward direct broadcast traffic
OBJECT-TYPE    
  TruthValue  

rcIpConfRipInPolicy 1.3.6.1.4.1.2272.1.8.1.1.1.15
Used to indicate whether this interface should advertize a RIP default route.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcIpConfRipOutPolicy 1.3.6.1.4.1.2272.1.8.1.1.1.16
Used to indicate whether this interface should accept a RIP default route.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcIpConfOspfIfType 1.3.6.1.4.1.2272.1.8.1.1.1.17
OSPF Interface Type.
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), passive(99)  

rcIpConfRipCost 1.3.6.1.4.1.2272.1.8.1.1.1.18
Used to indicate the rip cost for this interface.
OBJECT-TYPE    
  INTEGER 1..15  

rcIpConfOspfTable 1.3.6.1.4.1.2272.1.8.1.2
A table used to maintain OSPF information for a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfOspfEntry

rcIpConfOspfEntry 1.3.6.1.4.1.2272.1.8.1.2.1
Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpConfOspfEntry  

rcIpConfOspfIfIndex 1.3.6.1.4.1.2272.1.8.1.2.1.1
An unique value to identify a physical interface or a logical interface (VLAN).
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcIpConfOspfRtrPriority 1.3.6.1.4.1.2272.1.8.1.2.1.2
The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
OBJECT-TYPE    
  INTEGER 0..'FF'h  

rcIpConfOspfMetric 1.3.6.1.4.1.2272.1.8.1.2.1.3
The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfDefaultMetric) will be used as metric value, when the state of the interface is up.
OBJECT-TYPE    
  INTEGER 0..'FFFF'h  

rcIpConfOspfAuthKey 1.3.6.1.4.1.2272.1.8.1.2.1.4
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.
OBJECT-TYPE    
  DisplayString SIZE(8)  

rcIpConfOspfRowStatus 1.3.6.1.4.1.2272.1.8.1.2.1.5
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

rcIpConfOspfHelloInterval 1.3.6.1.4.1.2272.1.8.1.2.1.6
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpConfOspfRtrDeadInterval 1.3.6.1.4.1.2272.1.8.1.2.1.7
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..'7FFFFFFF'h  

rcIpConfOspfIfAreaId 1.3.6.1.4.1.2272.1.8.1.2.1.8
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfAuthType 1.3.6.1.4.1.2272.1.8.1.2.1.9
The authentication type specified for an interface. Additional authentication types may be assigned locally.
OBJECT-TYPE    
  INTEGER none(0), simplePassword(1), md5(2)  

rcIpConfOspfPollInterval 1.3.6.1.4.1.2272.1.8.1.2.1.10
OSPF NBMA Interface Poll Interval.
OBJECT-TYPE    
  INTEGER 0..2147483647  

rcIpConfOspfDefaultMetric 1.3.6.1.4.1.2272.1.8.1.3
OBJECT IDENTIFIER    

rcIpConfOspfDefaultMetric10MegPort 1.3.6.1.4.1.2272.1.8.1.3.1
Used to indicate the cost associated with 10Meg Interface(Port).
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpConfOspfDefaultMetric100MegPort 1.3.6.1.4.1.2272.1.8.1.3.2
Used to indicate the cost associated with 100Meg Interface(Port).
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpConfOspfDefaultMetric1000MegPort 1.3.6.1.4.1.2272.1.8.1.3.3
Used to indicate the cost associated with 1000Meg Interface(Port).
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpConfOspf 1.3.6.1.4.1.2272.1.8.1.4
OBJECT IDENTIFIER    

rcIpConfOspfTrapEnable 1.3.6.1.4.1.2272.1.8.1.4.1
Used to indicate whether Ospf Traps should be sent.
OBJECT-TYPE    
  TruthValue  

rcIpConfOspfAutoVirtLinkEnable 1.3.6.1.4.1.2272.1.8.1.4.2
Used to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, but adjacency will established only when one of the ABR losses connection to backbone area. If set to false then it is user resposibity to create virtual link whenever needed.
OBJECT-TYPE    
  TruthValue  

rcIpConfOspfSpfHoldDownTime 1.3.6.1.4.1.2272.1.8.1.4.3
The SPF Hold Down Timer value. The SPF will run at most once per hold down timer value.
OBJECT-TYPE    
  INTEGER 3..60  

rcIpConfOspfAction 1.3.6.1.4.1.2272.1.8.1.4.4
OBJECT-TYPE    
  INTEGER none(0), runSpf(1)  

rcIpConfGlobal 1.3.6.1.4.1.2272.1.8.1.6
OBJECT IDENTIFIER    

rcIpConfGlobalRipHoldDownTime 1.3.6.1.4.1.2272.1.8.1.6.1
Used to set the system-wide RIP hold down time in seconds.
OBJECT-TYPE    
  INTEGER 0..360  

rcIpConfGlobalIcmpNetUnreach 1.3.6.1.4.1.2272.1.8.1.6.2
Used to set the icmp net unreach feature enable/disable.
OBJECT-TYPE    
  TruthValue  

rcIpConfGlobalEcmpEnable 1.3.6.1.4.1.2272.1.8.1.6.3
Used to set the ecmp enable/disable.
OBJECT-TYPE    
  TruthValue  

rcIpConfGlobalEcmpMaxPath 1.3.6.1.4.1.2272.1.8.1.6.4
Used to globally configure maximum ECMP paths number.
OBJECT-TYPE    
  INTEGER 1..4  

rcIpConfGlobalAlternativeEnable 1.3.6.1.4.1.2272.1.8.1.6.5
Used to globally configure alternative enable.
OBJECT-TYPE    
  TruthValue  

rcIpConfGlobalRipDefImportMetric 1.3.6.1.4.1.2272.1.8.1.6.9
Rip def import metric
OBJECT-TYPE    
  INTEGER 0..15  

rcIpConfOspfAreaTable 1.3.6.1.4.1.2272.1.8.1.7
A table used to maintain OSPF information for a particular Area.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfOspfAreaEntry

rcIpConfOspfAreaEntry 1.3.6.1.4.1.2272.1.8.1.7.1
Entry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1253rcc.mib).
OBJECT-TYPE    
  RcIpConfOspfAreaEntry  

rcIpConfOspfAreaId 1.3.6.1.4.1.2272.1.8.1.7.1.1
An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfAreaImportSummary 1.3.6.1.4.1.2272.1.8.1.7.1.2
The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE
OBJECT-TYPE    
  TruthValue  

rcIpConfOspfAreaActiveIfCount 1.3.6.1.4.1.2272.1.8.1.7.1.3
This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0.
OBJECT-TYPE    
  INTEGER  

rcIpConfV2Table 1.3.6.1.4.1.2272.1.8.1.8
A table used to maintain IP routing information for a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfV2Entry

rcIpConfV2Entry 1.3.6.1.4.1.2272.1.8.1.8.1
Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpConfV2Entry  

rcIpConfV2Index 1.3.6.1.4.1.2272.1.8.1.8.1.1
An unique value to identify a physical interface or a logical interface (VLAN).
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcIpConfV2Addr 1.3.6.1.4.1.2272.1.8.1.8.1.2
Ip interface address.
OBJECT-TYPE    
  IpAddress  

rcIpConfV2RowStatus 1.3.6.1.4.1.2272.1.8.1.8.1.3
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

rcIpConfV2AdvertDefRte 1.3.6.1.4.1.2272.1.8.1.8.1.4
Used to indicate whether this interface should advertize a RIP default route.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2AcceptDefRte 1.3.6.1.4.1.2272.1.8.1.8.1.5
Used to indicate whether this interface should accept a RIP default route.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2RipEnable 1.3.6.1.4.1.2272.1.8.1.8.1.6
Enable or disable RIP routing on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2OspfEnable 1.3.6.1.4.1.2272.1.8.1.8.1.7
Enable or disable OSPF routing on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2IgmpEnable 1.3.6.1.4.1.2272.1.8.1.8.1.8
Enable or disable IGMP on the specified interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2AddrAssigned 1.3.6.1.4.1.2272.1.8.1.8.1.9
Indicate whether IpAddress has been assigned for this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2TriggeredUpdateEnable 1.3.6.1.4.1.2272.1.8.1.8.1.10
Used to indicate whether the RIP triggered update feature should be enabled on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2RipAutoAggrerateEnable 1.3.6.1.4.1.2272.1.8.1.8.1.11
Used to indicate whether the auto aggregation feature should be enabled on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2RipGenerateDefaultRoute 1.3.6.1.4.1.2272.1.8.1.8.1.12
Used to indicate whether to generate a default RIP route on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfV2AdvertiseWhenDown 1.3.6.1.4.1.2272.1.8.1.8.1.13
The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state.
OBJECT-TYPE    
  TruthValue  

rcIpConfOspfV2Table 1.3.6.1.4.1.2272.1.8.1.9
A table used to maintain OSPF information for a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfOspfV2Entry

rcIpConfOspfV2Entry 1.3.6.1.4.1.2272.1.8.1.9.1
Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpConfOspfV2Entry  

rcIpConfOspfV2IfIndex 1.3.6.1.4.1.2272.1.8.1.9.1.1
An unique value to identify a physical interface or a logical interface (VLAN).
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcIpConfOspfV2IpAddr 1.3.6.1.4.1.2272.1.8.1.9.1.2
IpAddress of the IP interface.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfV2RtrPriority 1.3.6.1.4.1.2272.1.8.1.9.1.3
The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
OBJECT-TYPE    
  INTEGER 0..'FF'h  

rcIpConfOspfV2Metric 1.3.6.1.4.1.2272.1.8.1.9.1.4
The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfV2DefaultMetric) will be used as metric value, when the state of the interface is up.
OBJECT-TYPE    
  INTEGER 0..'FFFF'h  

rcIpConfOspfV2AuthKey 1.3.6.1.4.1.2272.1.8.1.9.1.5
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.
OBJECT-TYPE    
  DisplayString SIZE(8)  

rcIpConfOspfV2RowStatus 1.3.6.1.4.1.2272.1.8.1.9.1.6
Row status for this entry.
OBJECT-TYPE    
  RowStatus  

rcIpConfOspfV2HelloInterval 1.3.6.1.4.1.2272.1.8.1.9.1.7
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpConfOspfV2RtrDeadInterval 1.3.6.1.4.1.2272.1.8.1.9.1.8
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..'7FFFFFFF'h  

rcIpConfOspfV2IfAreaId 1.3.6.1.4.1.2272.1.8.1.9.1.9
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfV2AuthType 1.3.6.1.4.1.2272.1.8.1.9.1.10
The authentication type specified for an interface. Additional authentication types may be assigned locally.
OBJECT-TYPE    
  INTEGER none(0), simplePassword(1), md5(2)  

rcIpConfOspfAreaAggregateTable 1.3.6.1.4.1.2272.1.8.1.10
A table used to maintain OSPF summary route metric parameter for a particular Area range.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfOspfAreaAggregateEntry

rcIpConfOspfAreaAggregateEntry 1.3.6.1.4.1.2272.1.8.1.10.1
Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configured through ospfAreaAggregateTable in rfc1850rcc.mib
OBJECT-TYPE    
  RcIpConfOspfAreaAggregateEntry  

rcIpConfOspfAreaAggregateAreaID 1.3.6.1.4.1.2272.1.8.1.10.1.1
The Area the Address Aggregate is to be found within.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfAreaAggregateLsdbType 1.3.6.1.4.1.2272.1.8.1.10.1.2
The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.
OBJECT-TYPE    
  INTEGER summaryLink(3), nssaExternalLink(7)  

rcIpConfOspfAreaAggregateNet 1.3.6.1.4.1.2272.1.8.1.10.1.3
The IP Address of the Net or Subnet indicated by the range.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfAreaAggregateMask 1.3.6.1.4.1.2272.1.8.1.10.1.4
The Subnet Mask that pertains to the Net or Subnet.
OBJECT-TYPE    
  IpAddress  

rcIpConfOspfAreaAggregateAdvertiseMetric 1.3.6.1.4.1.2272.1.8.1.10.1.5
Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpAddrTable 1.3.6.1.4.1.2272.1.8.2
The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIndex and rcIpAdEntAddr are reversed. Also, the table is indexed by both these variables.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpAddrEntry

rcIpAddrEntry 1.3.6.1.4.1.2272.1.8.2.1
The addressing information for one of this entity's IP addresses.
OBJECT-TYPE    
  RcIpAddrEntry  

rcIpAdEntIfIndex 1.3.6.1.4.1.2272.1.8.2.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcIpAdEntAddr 1.3.6.1.4.1.2272.1.8.2.1.2
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

rcIpAdEntNetMask 1.3.6.1.4.1.2272.1.8.2.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

rcIpAdEntBcastAddrFormat 1.3.6.1.4.1.2272.1.8.2.1.4
The IP broadcast address format used on this interface.
OBJECT-TYPE    
  INTEGER zeros(0), ones(1)  

rcIpAdEntReasmMaxSize 1.3.6.1.4.1.2272.1.8.2.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpAdEntRowStatus 1.3.6.1.4.1.2272.1.8.2.1.6
Used to create/delete entries
OBJECT-TYPE    
  RowStatus  

rcIpAdEntVlanId 1.3.6.1.4.1.2272.1.8.2.1.7
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpAdEntBrouterPort 1.3.6.1.4.1.2272.1.8.2.1.8
Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created.
OBJECT-TYPE    
  TruthValue  

rcIpAdEntMacOffset 1.3.6.1.4.1.2272.1.8.2.1.9
Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring an ip on the vlan or it can be alloted by the system within the above range.
OBJECT-TYPE    
  INTEGER 0..511  

rcIpFlowTable 1.3.6.1.4.1.2272.1.8.3
IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching entry in this table will be processed with a higher priority than connections that do not have an entry.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpFlowEntry

rcIpFlowEntry 1.3.6.1.4.1.2272.1.8.3.1
Proprietary flow control variables.
OBJECT-TYPE    
  RcIpFlowEntry  

rcIpFlowSrcIpAddress 1.3.6.1.4.1.2272.1.8.3.1.1
The source IP address of an IP packet.
OBJECT-TYPE    
  IpAddress  

rcIpFlowSrcIpPort 1.3.6.1.4.1.2272.1.8.3.1.2
The source port of an IP packet. A zero value in this field is used as a wildcard value.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpFlowDstIpAddress 1.3.6.1.4.1.2272.1.8.3.1.3
The destination IP address of an IP packet.
OBJECT-TYPE    
  IpAddress  

rcIpFlowDstIpPort 1.3.6.1.4.1.2272.1.8.3.1.4
The destination port of an IP packet. A zero value in this field is used as a wildcard value.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpFlowProtocol 1.3.6.1.4.1.2272.1.8.3.1.5
The protocol type of an IP packet. A zero value in this field is used as a wildcard value.
OBJECT-TYPE    
  INTEGER ip(4), tcp(6), udp(17)  

rcIpFlowRowStatus 1.3.6.1.4.1.2272.1.8.3.1.6
Status of entry.
OBJECT-TYPE    
  RowStatus  

rcIpRouting 1.3.6.1.4.1.2272.1.8.4
OBJECT IDENTIFIER    

rcIpRoutingRedistributeRipToOspf 1.3.6.1.4.1.2272.1.8.4.1
OBJECT IDENTIFIER    

rcIpRoutingRedistributeRipToOspfEnable 1.3.6.1.4.1.2272.1.8.4.1.1
Used to indicate whether or not to Redistribute RIP routes to OSPF.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeRipToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.1.2
Value of metric that is used to translate the RIP route to OSPF.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpRoutingRedistributeRipToOspfUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.1.3
Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeRipToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.1.4
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost).
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRoutingRedistributeOspfToRip 1.3.6.1.4.1.2272.1.8.4.2
OBJECT IDENTIFIER    

rcIpRoutingRedistributeOspfToRipEnable 1.3.6.1.4.1.2272.1.8.4.2.1
Used to indicate whether or not to redistribute OSPF routes to RIP.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeOspfToRipExplicitMetric 1.3.6.1.4.1.2272.1.8.4.2.2
Value of metric that is used to translate the OSPF route to RIP.
OBJECT-TYPE    
  INTEGER 1..16  

rcIpRoutingRedistributeOspfToRipUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.2.3
Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeDirectToOspf 1.3.6.1.4.1.2272.1.8.4.3
OBJECT IDENTIFIER    

rcIpRoutingRedistributeDirectToOspfEnable 1.3.6.1.4.1.2272.1.8.4.3.1
Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeDirectToOspfMethod 1.3.6.1.4.1.2272.1.8.4.3.2
Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF.
OBJECT-TYPE    
  INTEGER usePortSpeed(1), useExplicitMetric(2)  

rcIpRoutingRedistributeDirectToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.3.3
Value of metric that is used to translate the routes to directly connected networks to OSPF.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpRoutingRedistributeDirectToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.3.4
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost).
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRoutingRedistributeStaticToOspf 1.3.6.1.4.1.2272.1.8.4.4
OBJECT IDENTIFIER    

rcIpRoutingRedistributeStaticToOspfEnable 1.3.6.1.4.1.2272.1.8.4.4.1
Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeStaticToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.4.2
Value of metric that is used to translate the static routes to OSPF.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpRoutingRedistributeStaticToOspfUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.4.3
Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeStaticToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.4.4
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost).
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRoutingRedistributeStaticToOspfAdvertDefRte 1.3.6.1.4.1.2272.1.8.4.4.5
Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true then the default route will be added as external route to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeDirectToRip 1.3.6.1.4.1.2272.1.8.4.5
OBJECT IDENTIFIER    

rcIpRoutingRedistributeDirectToRipEnable 1.3.6.1.4.1.2272.1.8.4.5.1
Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not.
OBJECT-TYPE    
  TruthValue  

rcIpRoutingRedistributeStaticToRip 1.3.6.1.4.1.2272.1.8.4.6
OBJECT IDENTIFIER    

rcIpRoutingRedistributeStaticToRipEnable 1.3.6.1.4.1.2272.1.8.4.6.1
Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the static routes will be added as external routes to RIP routing domain.
OBJECT-TYPE    
  TruthValue  

rcIpConfIgmpTable 1.3.6.1.4.1.2272.1.8.5
A table used to maintain IGMP information for a particular interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfIgmpEntry

rcIpConfIgmpEntry 1.3.6.1.4.1.2272.1.8.5.1
Entry containing IGMP information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpConfIgmpEntry  

rcIpConfIgmpIfIndex 1.3.6.1.4.1.2272.1.8.5.1.1
An unique value to identify a physical interface or a logical interface (VLAN).
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpConfIgmpQueryInterval 1.3.6.1.4.1.2272.1.8.5.1.2
The frequency at which IGMP Host-Query packets are transmitted on this interface.
OBJECT-TYPE    
  INTEGER 1..65535  

rcIpConfIgmpVersion 1.3.6.1.4.1.2272.1.8.5.1.3
The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN.
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

rcIpConfIgmpQueryMaxResponseTime 1.3.6.1.4.1.2272.1.8.5.1.4
The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster.
OBJECT-TYPE    
  INTEGER 1..255  

rcIpConfIgmpQuerierPresentTimeout 1.3.6.1.4.1.2272.1.8.5.1.5
A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet to which this interface is attached.
OBJECT-TYPE    
  INTEGER  

rcIpConfIgmpLeaveEnabled 1.3.6.1.4.1.2272.1.8.5.1.6
An indication of whether the processing of IGMPv2 Leave messages is enabled on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpConfIgmpRowStatus 1.3.6.1.4.1.2272.1.8.5.1.7
Status of entry.
OBJECT-TYPE    
  RowStatus  

rcIpConfIgmpRobustness 1.3.6.1.4.1.2272.1.8.5.1.8
lossiness of network.
OBJECT-TYPE    
  INTEGER 2..255  

rcIpConfIgmpLastMemberQueryInterval 1.3.6.1.4.1.2272.1.8.5.1.9
max response in GrpSpec Query.
OBJECT-TYPE    
  INTEGER 1..255  

rcIpConfIgmpSnoopEnable 1.3.6.1.4.1.2272.1.8.5.1.10
Enable snoop.
OBJECT-TYPE    
  TruthValue  

rcIpConfIgmpProxySnoopEnable 1.3.6.1.4.1.2272.1.8.5.1.11
Enable proxy snoop.
OBJECT-TYPE    
  TruthValue  

rcIgmpGroupTable 1.3.6.1.4.1.2272.1.8.6
The (conceptual) table listing the multicast groups configured in the device.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIgmpGroupEntry

rcIgmpGroupEntry 1.3.6.1.4.1.2272.1.8.6.1
An entry (conceptual row) representing an Igmp group.
OBJECT-TYPE    
  RcIgmpGroupEntry  

rcIgmpGroupIpAddress 1.3.6.1.4.1.2272.1.8.6.1.1
Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.
OBJECT-TYPE    
  IpAddress  

rcIgmpGroupMembers 1.3.6.1.4.1.2272.1.8.6.1.2
IP Address of a source that has sent group report wishing to join this group.
OBJECT-TYPE    
  IpAddress  

rcIgmpGroupInPort 1.3.6.1.4.1.2272.1.8.6.1.3
An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIgmpGroupExpiration 1.3.6.1.4.1.2272.1.8.6.1.4
Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.
OBJECT-TYPE    
  INTEGER  

rcIpRouteTable 1.3.6.1.4.1.2272.1.8.7
This entity's IP Routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRouteEntry

rcIpRouteEntry 1.3.6.1.4.1.2272.1.8.7.1
A route to a particular destination.
OBJECT-TYPE    
  RcIpRouteEntry  

rcIpRouteDest 1.3.6.1.4.1.2272.1.8.7.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

rcIpRouteMask 1.3.6.1.4.1.2272.1.8.7.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

rcIpRouteNextHop 1.3.6.1.4.1.2272.1.8.7.1.3
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).
OBJECT-TYPE    
  IpAddress  

rcIpRouteMetric 1.3.6.1.4.1.2272.1.8.7.1.4
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

rcIpRouteIfIndex 1.3.6.1.4.1.2272.1.8.7.1.5
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcIpRouteType 1.3.6.1.4.1.2272.1.8.7.1.6
The type of route.
OBJECT-TYPE    
  INTEGER other(1), direct(3), indirect(4)  

rcIpRouteProto 1.3.6.1.4.1.2272.1.8.7.1.7
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)  

rcIpRouteAge 1.3.6.1.4.1.2272.1.8.7.1.8
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  INTEGER  

rcIpRouteRowStatus 1.3.6.1.4.1.2272.1.8.7.1.9
Used to create/delete entries
OBJECT-TYPE    
  RowStatus  

rcIpRoutePref 1.3.6.1.4.1.2272.1.8.7.1.10
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRouteAltSequence 1.3.6.1.4.1.2272.1.8.7.1.11
Alternative Route Sequence. 0 denotes Best Route.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePathType 1.3.6.1.4.1.2272.1.8.7.1.12
The type of route. It is a combination of direct, indirect, best, alternative and ECMP path.
OBJECT-TYPE    
  INTEGER iA(0), iAE(1), iB(2), iBE(3), dB(6)  

rcIpConfDhcpTable 1.3.6.1.4.1.2272.1.8.8
DHCP configuration table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpConfDhcpEntry

rcIpConfDhcpEntry 1.3.6.1.4.1.2272.1.8.8.1
Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting.
OBJECT-TYPE    
  RcIpConfDhcpEntry  

rcIpConfDhcpIfIndex 1.3.6.1.4.1.2272.1.8.8.1.1
Interface number. The number can represent either a physical or logical(VLAN) interface.
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcIpConfDhcpMaxHop 1.3.6.1.4.1.2272.1.8.8.1.2
Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server).
OBJECT-TYPE    
  INTEGER 1..16  

rcIpConfDhcpMinSec 1.3.6.1.4.1.2272.1.8.8.1.3
Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immediately without any delay.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpConfDhcpMode 1.3.6.1.4.1.2272.1.8.8.1.4
Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped.
OBJECT-TYPE    
  INTEGER none(0), bootp(2), dhcp(3), both(4)  

rcIpConfDhcpRowStatus 1.3.6.1.4.1.2272.1.8.8.1.5
An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting.
OBJECT-TYPE    
  RowStatus  

rcIpConfDhcpNumRequests 1.3.6.1.4.1.2272.1.8.8.1.6
The total number of DHCP requests seen on this interface.
OBJECT-TYPE    
  Counter  

rcIpConfDhcpNumReplies 1.3.6.1.4.1.2272.1.8.8.1.7
The total number of DHCP replies seen on this interface.
OBJECT-TYPE    
  Counter  

rcIpConfDhcpAlwaysBroadcast 1.3.6.1.4.1.2272.1.8.8.1.8
Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface.
OBJECT-TYPE    
  TruthValue  

rcIpDhcpForwardTable 1.3.6.1.4.1.2272.1.8.9
DHCP forwarding table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpDhcpForwardEntry

rcIpDhcpForwardEntry 1.3.6.1.4.1.2272.1.8.9.1
An entry used represents a DHCP forwarding directive.
OBJECT-TYPE    
  RcIpDhcpForwardEntry  

rcIpDhcpForwardAgentAddr 1.3.6.1.4.1.2272.1.8.9.1.1
The IP address configured on an interface (i.e., a locally configured IP address).
OBJECT-TYPE    
  IpAddress  

rcIpDhcpForwardServerAddr 1.3.6.1.4.1.2272.1.8.9.1.2
The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP address is assigned to. This behavior is known as 'relay agent' mode. If this IP address is a remote address, the DHCP packet is sent via unicast to the remote device. This behavior is known as 'preferred server' mode.
OBJECT-TYPE    
  IpAddress  

rcIpDhcpForwardEnable 1.3.6.1.4.1.2272.1.8.9.1.3
Used to indicate whether is entry should be used.
OBJECT-TYPE    
  TruthValue  

rcIpDhcpForwardMode 1.3.6.1.4.1.2272.1.8.9.1.4
Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both.
OBJECT-TYPE    
  INTEGER none(0), bootp(2), dhcp(3), both(4)  

rcIpDhcpForwardRowStatus 1.3.6.1.4.1.2272.1.8.9.1.5
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpFilter 1.3.6.1.4.1.2272.1.8.10
OBJECT IDENTIFIER    

rcIpFilterFilterTableSize 1.3.6.1.4.1.2272.1.8.10.1
Used to indicate the number of entries in the rcIpFilterTable.
OBJECT-TYPE    
  INTEGER  

rcIpFilterGlobalListTableSize 1.3.6.1.4.1.2272.1.8.10.2
Used to indicate the number of entries in the rcIpFilterGlobalListTable.
OBJECT-TYPE    
  INTEGER  

rcIpFilterBaseListTableSize 1.3.6.1.4.1.2272.1.8.10.3
Used to indicate the number of entries in the rcIpFilterBaseListTable.
OBJECT-TYPE    
  INTEGER  

rcIpFilterPortTableSize 1.3.6.1.4.1.2272.1.8.10.4
Used to indicate the number of entries in the rcIpFilterPortTable.
OBJECT-TYPE    
  INTEGER  

rcIpFilterNextAvailFilterId 1.3.6.1.4.1.2272.1.8.10.5
next available filter-id in the rcIpFilterPortTable.
OBJECT-TYPE    
  INTEGER  

rcIpFilterTable 1.3.6.1.4.1.2272.1.8.10.20
A table containing IP filters.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpFilterEntry

rcIpFilterEntry 1.3.6.1.4.1.2272.1.8.10.20.1
IP filter attributes. The system supports a vast array of filter options. Each of these options are supported in this entry. If a particular option is not used, the column should be set to zero.
OBJECT-TYPE    
  RcIpFilterEntry  

rcIpFilterType 1.3.6.1.4.1.2272.1.8.10.20.1.1
Used to indicate a particular type of filter. A 'global' filter is a filter that is applied to all packets irregardless of the packet's source or destination IP address. A 'destination' filter is used to match the destination IP address field of incoming packets. When a match is found, this filter is applied to the packet. A 'source' filter is used to match the source IP address field of incoming packets. When a match is found, this filter is applied to the packet.
OBJECT-TYPE    
  INTEGER global(1), destination(2), source(3)  

rcIpFilterDstAddr 1.3.6.1.4.1.2272.1.8.10.20.1.2
Destination IP address to filter on.
OBJECT-TYPE    
  IpAddress  

rcIpFilterDstMask 1.3.6.1.4.1.2272.1.8.10.20.1.3
Destination IP subnet mask to filter on.
OBJECT-TYPE    
  IpAddress  

rcIpFilterSrcAddr 1.3.6.1.4.1.2272.1.8.10.20.1.4
Source IP address to filter on.
OBJECT-TYPE    
  IpAddress  

rcIpFilterSrcMask 1.3.6.1.4.1.2272.1.8.10.20.1.5
Source IP subnet mask to filter on.
OBJECT-TYPE    
  IpAddress  

rcIpFilterId 1.3.6.1.4.1.2272.1.8.10.20.1.6
This filter's unique identifier(id). This id is automatically generated by the system when a filter is created. This id is used in the 'rcIpFilterGlobalListTable' and 'rcIpFilterBaseListTable' when grouping one or more filters into a filter list.
OBJECT-TYPE    
  INTEGER 1..4096  

rcIpFilterName 1.3.6.1.4.1.2272.1.8.10.20.1.7
This filter's name.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpFilterProtocolType 1.3.6.1.4.1.2272.1.8.10.20.1.8
Type of protocol to filter on.
OBJECT-TYPE    
  INTEGER ignore(0), icmp(1), tcp(6), udp(17), ipsecesp(50), ipsecah(51), ospf(89), vrrp(112), usrDefined(256)  

rcIpFilterSrcPort 1.3.6.1.4.1.2272.1.8.10.20.1.9
TCP/UDP source port to filter on.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpFilterSrcOption 1.3.6.1.4.1.2272.1.8.10.20.1.10
Type of matching to perform on the field 'rcIpFilterSrcPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'.
OBJECT-TYPE    
  INTEGER equal(0), notEqual(1), greater(2), less(3), ignore(4)  

rcIpFilterDstPort 1.3.6.1.4.1.2272.1.8.10.20.1.11
TCP/UDP destination port to filter on.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpFilterDstOption 1.3.6.1.4.1.2272.1.8.10.20.1.12
Type of matching to perform on the field 'rcIpFilterDstPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'.
OBJECT-TYPE    
  INTEGER equal(0), notEqual(1), greater(2), less(3), ignore(4)  

rcIpFilterCopyToCpu 1.3.6.1.4.1.2272.1.8.10.20.1.13
Used to specify whether a packet matching this filter should be copied to the CPU.
OBJECT-TYPE    
  TruthValue  

rcIpFilterMirror 1.3.6.1.4.1.2272.1.8.10.20.1.14
Used to specify whether a packet matching this filter should be mirrored to the port specified by 'rcMirrorByPortMirrorPort'.
OBJECT-TYPE    
  TruthValue  

rcIpFilterHighPriority 1.3.6.1.4.1.2272.1.8.10.20.1.15
Used to specify whether a packet matching this filter should be forwarded with high priority.
OBJECT-TYPE    
  TruthValue  

rcIpFilterTcpConnect 1.3.6.1.4.1.2272.1.8.10.20.1.16
Used to specify whether a TCP packet matching this filter should be accepted. Pass only those matching TCP packets with either the ACK bit or RST bit set. Apply only if the IP Protocol is set to TCP.
OBJECT-TYPE    
  TruthValue  

rcIpFilterIeeeVlanPriority 1.3.6.1.4.1.2272.1.8.10.20.1.17
Used to specify the priority bits for explicit IEEE VLAN tag for a packet matching this filter. If this priority bit field is greater than the priority field currently in the IEEE tag in the Packet Header, this priority field will be loaded into the Packet Header.
OBJECT-TYPE    
  INTEGER 0..7  

rcIpFilterUsePktLimit 1.3.6.1.4.1.2272.1.8.10.20.1.18
Used to specify whether the 'rcIpFilterPktLimit' field in this entry should be used when applying this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterPktLimit 1.3.6.1.4.1.2272.1.8.10.20.1.19
The maximum packet size limit to filter against.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpFilterRowStatus 1.3.6.1.4.1.2272.1.8.10.20.1.20
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpFilterMode 1.3.6.1.4.1.2272.1.8.10.20.1.21
Used to specify the operation mode for this entry. 'useDefaultAction' means use the setting specified in the 'rcIpFilterPortDefaultAction' variable. 'forward' means forward the packet if the packet satisfies this policy. 'drop' means drop the packet if the packet satisfies this policy. 'forwardToNextHop' means forward the packet to the next hop if the packet satisfies this policy. This variable setting has higher precedence than the setting in 'rcIpFilterPortDefaultAction'.
OBJECT-TYPE    
  INTEGER useDefaultAction(1), forward(2), drop(3), forwardToNextHop(4)  

rcIpFilterIpTosRule 1.3.6.1.4.1.2272.1.8.10.20.1.22
Used to specify the operation mode for this entry. 'none' means do not manupulate the Ip ToS byte. 'ipTosRule1' means manipulate the Ip ToS byte according to Quid/Gid Rule 1 which is defined in rcIpTosRuleOrRule1. 'ipTosRule2' means manipulate the Ip ToS byte according to Quid/Gid Rule 2 which is defined in rcIpTosRuleOrRule2. 'ipTosRule3' means manipulate the Ip ToS byte according to Quid/Gid Rule 3 which is defined in rcIpTosRuleOrRule3.
OBJECT-TYPE    
  INTEGER none(0), ipTosRule1(1), ipTosRule2(2), ipTosRule3(3)  

rcIpFilterStopOnMatch 1.3.6.1.4.1.2272.1.8.10.20.1.23
Used to stop further filtering if this filter is applied.
OBJECT-TYPE    
  TruthValue  

rcIpFilterDiffServMatchIeee8021PEnable 1.3.6.1.4.1.2272.1.8.10.20.1.24
Used to specify whether the value stored in the variable 'rcIpFilterDiffServMatchIeee8021P' should be used in this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterDiffServMatchIeee8021P 1.3.6.1.4.1.2272.1.8.10.20.1.25
Used to specify the match value for the 802.1P field. If the 802.1P field in the incoming packet matches this value, then this filter will be applied to the packet.
OBJECT-TYPE    
  INTEGER 0..7  

rcIpFilterDiffServMatchDscpEnable 1.3.6.1.4.1.2272.1.8.10.20.1.26
Used to specify whether the values stored in the variable 'rcIpFilterDiffServMatchDscp' and 'rcIpFilterDiffServMatchDscpReserved' should be used in this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterDiffServMatchDscp 1.3.6.1.4.1.2272.1.8.10.20.1.27
Used to specify the match value for the DSCP. If the DSCP in the incoming packet matches this value, then this filter will be applied to the packet. The DSCP represents the high-order 6 bits of the TOS byte (in network order).
OBJECT-TYPE    
  DisplayString SIZE(6)  

rcIpFilterDiffServMatchDscpReserved 1.3.6.1.4.1.2272.1.8.10.20.1.28
Used to specify the match value of the low-order 2 bits of the TOS byte (in network order).
OBJECT-TYPE    
  DisplayString SIZE(2)  

rcIpFilterDiffServModifyIeee8021PEnable 1.3.6.1.4.1.2272.1.8.10.20.1.29
Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyIeee8021P' should be used in this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterDiffServModifyIeee8021P 1.3.6.1.4.1.2272.1.8.10.20.1.30
Used to specify the value the 802.1P field should be modified to if this filter is applied. The modification is applied at the egress point.
OBJECT-TYPE    
  INTEGER 0..7  

rcIpFilterDiffServModifyDscpEnable 1.3.6.1.4.1.2272.1.8.10.20.1.31
Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyDscp' should be used in this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterDiffServModifyDscp 1.3.6.1.4.1.2272.1.8.10.20.1.32
Used to specify what the value of the DSCP should be modified to if this filter is applied. The modification is applied at the egress point. The DSCP represents the high-order 6 bits of the TOS byte (in network order).
OBJECT-TYPE    
  DisplayString SIZE(6)  

rcIpFilterDiffServModifyDscpReserved 1.3.6.1.4.1.2272.1.8.10.20.1.33
Used to specify the modify value of the low-order 2 bits of the TOS byte (in network order).
OBJECT-TYPE    
  DisplayString SIZE(2)  

rcIpFilterDiffServTrafficProfileId 1.3.6.1.4.1.2272.1.8.10.20.1.34
Used to specify which traffic profile should be applied to packets matching this filter. Traffic profiles are specified in the 'rc2kQosTrafficProfileTable' table. A '0' value means do not apply any traffic profile.
OBJECT-TYPE    
  INTEGER 0..64  

rcIpFilterMatchIcmpRequest 1.3.6.1.4.1.2272.1.8.10.20.1.35
Used to specify whether matching on ICMP Request packets should be performed.
OBJECT-TYPE    
  TruthValue  

rcIpFilterMatchIpFragment 1.3.6.1.4.1.2272.1.8.10.20.1.36
Used to specify whether matching on fragmented IP packets should be performed.
OBJECT-TYPE    
  TruthValue  

rcIpFilterStatisticEnable 1.3.6.1.4.1.2272.1.8.10.20.1.37
Used to turn on/off counters for this filter.
OBJECT-TYPE    
  TruthValue  

rcIpFilterInOctets 1.3.6.1.4.1.2272.1.8.10.20.1.38
The number of In-Octets for this filter.
OBJECT-TYPE    
  Counter32  

rcIpFilterInPackets 1.3.6.1.4.1.2272.1.8.10.20.1.39
The number of In-Packets for this filter.
OBJECT-TYPE    
  Counter32  

rcIpFilterRateLimitDiscardPackets 1.3.6.1.4.1.2272.1.8.10.20.1.40
The number of packets discarded due to rate limiting.
OBJECT-TYPE    
  Counter32  

rcIpFilterNextHopForwardIpAddr 1.3.6.1.4.1.2272.1.8.10.20.1.41
Next hop forward Ip address.
OBJECT-TYPE    
  IpAddress  

rcIpFilterNextHopUnreachableDropEnable 1.3.6.1.4.1.2272.1.8.10.20.1.42
If next hop is unreachalbe, enable/disable to drop the packet.
OBJECT-TYPE    
  TruthValue  

rcIpFilterProtocolTypeUsrDefined 1.3.6.1.4.1.2272.1.8.10.20.1.43
When rcIpFilterProtocolType is set to usrDefined(256) in an IP Filter, this field represents the 8-bit user defined protocol identifier.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpFilterGlobalListTable 1.3.6.1.4.1.2272.1.8.10.21
A table used to store global filter list information. Each row in the table contains a set of individual filters that make up a particular filter list.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpFilterGlobalListEntry

rcIpFilterGlobalListEntry 1.3.6.1.4.1.2272.1.8.10.21.1
Global filter list attributes.
OBJECT-TYPE    
  RcIpFilterGlobalListEntry  

rcIpFilterGlobalListId 1.3.6.1.4.1.2272.1.8.10.21.1.1
An unique value to identify a particular global filter list.
OBJECT-TYPE    
  INTEGER 1..100  

rcIpFilterGlobalListName 1.3.6.1.4.1.2272.1.8.10.21.1.2
Name of this filter list.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpFilterGlobalListFilterIdListSize 1.3.6.1.4.1.2272.1.8.10.21.1.3
Used to indicate the number of filters are associated with this filter list.
OBJECT-TYPE    
  INTEGER 0..8  

rcIpFilterGlobalListFilterIdList 1.3.6.1.4.1.2272.1.8.10.21.1.4
Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  IdList SIZE(16)  

rcIpFilterGlobalListRowStatus 1.3.6.1.4.1.2272.1.8.10.21.1.5
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpFilterGlobalListMemberPorts 1.3.6.1.4.1.2272.1.8.10.21.1.6
Ports filter is used on.
OBJECT-TYPE    
  PortSet  

rcIpFilterBaseListTable 1.3.6.1.4.1.2272.1.8.10.22
A table used to store base filter list information. Each row in the table contains a set of individual filters that make up a particular filter list.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpFilterBaseListEntry

rcIpFilterBaseListEntry 1.3.6.1.4.1.2272.1.8.10.22.1
Base filter list attributes.
OBJECT-TYPE    
  RcIpFilterBaseListEntry  

rcIpFilterBaseListId 1.3.6.1.4.1.2272.1.8.10.22.1.1
An unique value to identify a particular base filter list.
OBJECT-TYPE    
  INTEGER 300..1000  

rcIpFilterBaseListName 1.3.6.1.4.1.2272.1.8.10.22.1.2
Name of this filter list.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpFilterBaseListFilterIdListSize 1.3.6.1.4.1.2272.1.8.10.22.1.3
Used to indicate the number of filters are associated with this filter list.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpFilterBaseListFilterIdList 1.3.6.1.4.1.2272.1.8.10.22.1.4
Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  IdList SIZE(256)  

rcIpFilterBaseListRowStatus 1.3.6.1.4.1.2272.1.8.10.22.1.5
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpFilterBaseListMemberPorts 1.3.6.1.4.1.2272.1.8.10.22.1.6
Ports filter is used on.
OBJECT-TYPE    
  PortSet  

rcIpFilterPortTable 1.3.6.1.4.1.2272.1.8.10.23
A table used to store port filtering information.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpFilterPortEntry

rcIpFilterPortEntry 1.3.6.1.4.1.2272.1.8.10.23.1
Port entry attributes.
OBJECT-TYPE    
  RcIpFilterPortEntry  

rcIpFilterPortIfIndex 1.3.6.1.4.1.2272.1.8.10.23.1.1
IfIndex value of a port where filtering is applied.
OBJECT-TYPE    
  InterfaceIndex  

rcIpFilterPortFilterListSize 1.3.6.1.4.1.2272.1.8.10.23.1.2
Used to indicate the number of filter list(s) that are assigned to this port.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpFilterPortFilterList 1.3.6.1.4.1.2272.1.8.10.23.1.3
Used to indicate zero or more filter lists that are associated with this port. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpFilterPortMode 1.3.6.1.4.1.2272.1.8.10.23.1.4
Used to indicate when filters applied to this port should be treated as 'permit' or 'deny' filters. When filters are not enabled on the port the mode is set to none. The port does not block any packet. Mode None cannot be used when PortEnable is true. On a port configured as 'permit', any packet that satisfies a filter is allowed to be forwarded. On a port configured as 'deny', any packet that satisfies a filter is dropped.
OBJECT-TYPE    
  INTEGER permit(1), deny(2), none(3)  

rcIpFilterPortEnable 1.3.6.1.4.1.2272.1.8.10.23.1.5
Used to indicate whether filtering is configured on this port.
OBJECT-TYPE    
  TruthValue  

rcIpFilterPortRowStatus 1.3.6.1.4.1.2272.1.8.10.23.1.6
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpFilterPortDefaultAction 1.3.6.1.4.1.2272.1.8.10.23.1.7
Used to indicate the default action that should be performed when an IP filter applies to a particular port. When filters are not enabled on the port the action is set to 'none' which means the port does not block any packet. 'none' cannot be used when PortEnable is true. On a port configured as 'forward', any packet that satisfies a filter is allowed to be forwarded. On a port configured as 'drop', any packet that satisfies a filter is dropped.
OBJECT-TYPE    
  INTEGER forward(1), drop(2), none(3)  

rcIpFilterPortNumGlobalFilters 1.3.6.1.4.1.2272.1.8.10.23.1.8
# of global filters
OBJECT-TYPE    
  INTEGER  

rcIpFilterPortNumBaseFilters 1.3.6.1.4.1.2272.1.8.10.23.1.9
# of base filters
OBJECT-TYPE    
  INTEGER  

rcIpPolicy 1.3.6.1.4.1.2272.1.8.11
OBJECT IDENTIFIER    

rcIpPolicyAddrTableSize 1.3.6.1.4.1.2272.1.8.11.1
Used to indicate the number of entries in the rcIpPolicyAddrTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyAddrTable 1.3.6.1.4.1.2272.1.8.11.2
A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyAddrEntry

rcIpPolicyAddrEntry 1.3.6.1.4.1.2272.1.8.11.2.1
Route entry attributes.
OBJECT-TYPE    
  RcIpPolicyAddrEntry  

rcIpPolicyAddrIpAddr 1.3.6.1.4.1.2272.1.8.11.2.1.1
The network address for this type of list entry. This value is required for all types of lists.
OBJECT-TYPE    
  IpAddress  

rcIpPolicyAddrId 1.3.6.1.4.1.2272.1.8.11.2.1.2
Identifier of this entry. Used internally to identify this entry.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyAddrAddrListIdListSize 1.3.6.1.4.1.2272.1.8.11.2.1.3
Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrAddrListIdList 1.3.6.1.4.1.2272.1.8.11.2.1.4
Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyAddrRowStatus 1.3.6.1.4.1.2272.1.8.11.2.1.5
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyNetTableSize 1.3.6.1.4.1.2272.1.8.11.3
Used to indicate the number of entries in the rcIpPolicyNetTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyNetTable 1.3.6.1.4.1.2272.1.8.11.4
A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyNetEntry

rcIpPolicyNetEntry 1.3.6.1.4.1.2272.1.8.11.4.1
Route entry attributes.
OBJECT-TYPE    
  RcIpPolicyNetEntry  

rcIpPolicyNetAddr 1.3.6.1.4.1.2272.1.8.11.4.1.1
The network address for this type of list entry. This value is required for all types of lists.
OBJECT-TYPE    
  IpAddress  

rcIpPolicyNetMask 1.3.6.1.4.1.2272.1.8.11.4.1.2
The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For other types it should have the value 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

rcIpPolicyNetId 1.3.6.1.4.1.2272.1.8.11.4.1.3
Used internally to recognize this entry.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyNetNetListIdListSize 1.3.6.1.4.1.2272.1.8.11.4.1.4
Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetNetListIdList 1.3.6.1.4.1.2272.1.8.11.4.1.5
Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyNetRowStatus 1.3.6.1.4.1.2272.1.8.11.4.1.6
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyAddrListTableSize 1.3.6.1.4.1.2272.1.8.11.5
Used to indicate the number of entries in the rcIpPolicyAddrListTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyAddrListTable 1.3.6.1.4.1.2272.1.8.11.6
A table used to group rcIpPolicyAddrEntry(s) into a list.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyAddrListEntry

rcIpPolicyAddrListEntry 1.3.6.1.4.1.2272.1.8.11.6.1
Route entry attributes.
OBJECT-TYPE    
  RcIpPolicyAddrListEntry  

rcIpPolicyAddrListId 1.3.6.1.4.1.2272.1.8.11.6.1.1
A value that uniquely identifies this list of rcIpPolicyAddrListEntry.
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyAddrListName 1.3.6.1.4.1.2272.1.8.11.6.1.3
An administratively-assigned name for this list.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyAddrListIdListSize 1.3.6.1.4.1.2272.1.8.11.6.1.4
Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrListIdList 1.3.6.1.4.1.2272.1.8.11.6.1.5
Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyAddrListPolicyIdListSize 1.3.6.1.4.1.2272.1.8.11.6.1.6
Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyAddrListPolicyIdList 1.3.6.1.4.1.2272.1.8.11.6.1.7
Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyAddrListRowStatus 1.3.6.1.4.1.2272.1.8.11.6.1.8
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyRipAnnounceTableSize 1.3.6.1.4.1.2272.1.8.11.7
Used to indicate the number of entries in the rcIpPolicyRipAnnounceTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyRipAnnounceTable 1.3.6.1.4.1.2272.1.8.11.8
A table used to store set of announce policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyRipAnnounceEntry

rcIpPolicyRipAnnounceEntry 1.3.6.1.4.1.2272.1.8.11.8.1
Entry containing configuration information for a particular announce policy.
OBJECT-TYPE    
  RcIpPolicyRipAnnounceEntry  

rcIpPolicyRipAnnounceId 1.3.6.1.4.1.2272.1.8.11.8.1.1
A value that uniquely identifies the policy associated with this entry.
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyRipAnnounceName 1.3.6.1.4.1.2272.1.8.11.8.1.2
An administratively-assigned name for this policy.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyRipAnnounceEnable 1.3.6.1.4.1.2272.1.8.11.8.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
OBJECT-TYPE    
  TruthValue  

rcIpPolicyRipAnnounceExactNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRangeNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.8.1.6
Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.8.1.7
Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceOspfRouterListId 1.3.6.1.4.1.2272.1.8.11.8.1.8
Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF is included as a RouteSource. The list contains one or more router IDs of OSPF routers. If a routerId is included in this list, this policy applies to OSPF advertisements received from that router. A value of '0' indicates that this policy applies to any OPSF routes received from any router.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceAnnounceInterfaceListId 1.3.6.1.4.1.2272.1.8.11.8.1.9
Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addresses. If the outbound interface address in this list, the policy applies to RIP updates/advertisements sent through this interface. A value of '0' indicates that this policy applies to any outbound RIP interface on this router.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnouncePrecedence 1.3.6.1.4.1.2272.1.8.11.8.1.10
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyRipAnnounceRouteSource 1.3.6.1.4.1.2272.1.8.11.8.1.11
Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy.
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(4), ospf(8), any(15)  

rcIpPolicyRipAnnounceAdvertiseNetListId 1.3.6.1.4.1.2272.1.8.11.8.1.12
Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAnnounceAction 1.3.6.1.4.1.2272.1.8.11.8.1.13
It indicates whether the route should be announced or not.
OBJECT-TYPE    
  INTEGER announce(1), ignore(2)  

rcIpPolicyRipAnnounceOspfRouteType 1.3.6.1.4.1.2272.1.8.11.8.1.14
Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this policy to only type2 OSPF external routes. 'internal' means 'match ospf specfic routes'. 'any' means apply this policy to all OSPF external routes.
OBJECT-TYPE    
  INTEGER type1(1), type2(2), external(3), internal(4), any(5)  

rcIpPolicyRipAnnounceRipMetric 1.3.6.1.4.1.2272.1.8.11.8.1.15
RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. If set to zero, the routing table metric calculated for RIP is is used.
OBJECT-TYPE    
  INTEGER 0..15  

rcIpPolicyRipAnnounceRowStatus 1.3.6.1.4.1.2272.1.8.11.8.1.16
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyOspfAnnounceTableSize 1.3.6.1.4.1.2272.1.8.11.9
Used to indicate the number of entries in the rcIpPolicyOspfAnnounceTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyOspfAnnounceTable 1.3.6.1.4.1.2272.1.8.11.10
A table used to store set of announce policies configured for OSPF routing protocol. The Number of entries is given by rcIpPolicyNumOspfPolicies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyOspfAnnounceEntry

rcIpPolicyOspfAnnounceEntry 1.3.6.1.4.1.2272.1.8.11.10.1
Entry containing configuration information for a particular announce policy.
OBJECT-TYPE    
  RcIpPolicyOspfAnnounceEntry  

rcIpPolicyOspfAnnounceId 1.3.6.1.4.1.2272.1.8.11.10.1.1
A value that uniquely identifies the policy associated with this entry.
OBJECT-TYPE    
  INTEGER 2001..3000  

rcIpPolicyOspfAnnounceName 1.3.6.1.4.1.2272.1.8.11.10.1.2
An administratively-assigned name for this policy.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyOspfAnnounceEnable 1.3.6.1.4.1.2272.1.8.11.10.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
OBJECT-TYPE    
  TruthValue  

rcIpPolicyOspfAnnounceExactNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRangeNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.10.1.6
Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.10.1.7
Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnouncePrecedence 1.3.6.1.4.1.2272.1.8.11.10.1.8
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAnnounceRouteSource 1.3.6.1.4.1.2272.1.8.11.10.1.9
Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy.
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(4), any(7)  

rcIpPolicyOspfAnnounceAdvertiseNetListId 1.3.6.1.4.1.2272.1.8.11.10.1.10
Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAnnounceAction 1.3.6.1.4.1.2272.1.8.11.10.1.11
It indicates whether the route should be announced or not.
OBJECT-TYPE    
  INTEGER announce(1), ignore(2)  

rcIpPolicyOspfAnnounceExtMetricType 1.3.6.1.4.1.2272.1.8.11.10.1.12
Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2' means the ospf-metric is equal to 'type2'.
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpPolicyOspfAnnounceExtMetric 1.3.6.1.4.1.2272.1.8.11.10.1.13
OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. Value '0' is used to indicate that route's actual cost is used to announce.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAnnounceRowStatus 1.3.6.1.4.1.2272.1.8.11.10.1.14
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyRipAcceptTableSize 1.3.6.1.4.1.2272.1.8.11.11
Used to indicate the number of entries in the rcIpPolicyRipAcceptTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyRipAcceptTable 1.3.6.1.4.1.2272.1.8.11.12
A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyRipAcceptEntry

rcIpPolicyRipAcceptEntry 1.3.6.1.4.1.2272.1.8.11.12.1
Entry containing configuration information for a particular accept policy.
OBJECT-TYPE    
  RcIpPolicyRipAcceptEntry  

rcIpPolicyRipAcceptId 1.3.6.1.4.1.2272.1.8.11.12.1.1
A value that uniquely identifies the policy associated with this entry.
OBJECT-TYPE    
  INTEGER 4001..5000  

rcIpPolicyRipAcceptName 1.3.6.1.4.1.2272.1.8.11.12.1.2
An administratively-assigned name for this policy.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyRipAcceptEnable 1.3.6.1.4.1.2272.1.8.11.12.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
OBJECT-TYPE    
  TruthValue  

rcIpPolicyRipAcceptExactNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRangeNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRipGatewayListId 1.3.6.1.4.1.2272.1.8.11.12.1.6
Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates from any router.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptRipInterfaceListId 1.3.6.1.4.1.2272.1.8.11.12.1.7
Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or more interfaces on this router. If an interface address is included in the list, this policy applies to RIP advertisements received on that interface. If set to '0', this policy applies to RIP updates received on any interface.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptPrecedence 1.3.6.1.4.1.2272.1.8.11.12.1.8
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyRipAcceptAction 1.3.6.1.4.1.2272.1.8.11.12.1.9
It indicates whether the route should be acceptd or not.
OBJECT-TYPE    
  INTEGER accept(1), ignore(2)  

rcIpPolicyRipAcceptInjectNetListId 1.3.6.1.4.1.2272.1.8.11.12.1.10
Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyRipAcceptApplyMask 1.3.6.1.4.1.2272.1.8.11.12.1.11
If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network number from the RIP update. This is used to override the interface's subnet mask in the presence of networks with variable length subnet masks.
OBJECT-TYPE    
  IpAddress  

rcIpPolicyRipAcceptRowStatus 1.3.6.1.4.1.2272.1.8.11.12.1.12
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyOspfAcceptTableSize 1.3.6.1.4.1.2272.1.8.11.13
Used to indicate the number of entries in the rcIpPolicyOspfAcceptTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyOspfAcceptTable 1.3.6.1.4.1.2272.1.8.11.14
A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyOspfAcceptEntry

rcIpPolicyOspfAcceptEntry 1.3.6.1.4.1.2272.1.8.11.14.1
Entry containing configuration information for a particular accept policy.
OBJECT-TYPE    
  RcIpPolicyOspfAcceptEntry  

rcIpPolicyOspfAcceptId 1.3.6.1.4.1.2272.1.8.11.14.1.1
A value that uniquely identifies the policy associated with this entry.
OBJECT-TYPE    
  INTEGER 6001..7000  

rcIpPolicyOspfAcceptName 1.3.6.1.4.1.2272.1.8.11.14.1.2
An administratively-assigned name for this policy.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyOspfAcceptEnable 1.3.6.1.4.1.2272.1.8.11.14.1.3
It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.
OBJECT-TYPE    
  TruthValue  

rcIpPolicyOspfAcceptExactNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.4
Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptRangeNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.5
Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptPrecedence 1.3.6.1.4.1.2272.1.8.11.14.1.6
Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins).
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpPolicyOspfAcceptAction 1.3.6.1.4.1.2272.1.8.11.14.1.7
It indicates whether the route should be acceptd or not.
OBJECT-TYPE    
  INTEGER accept(1), ignore(2)  

rcIpPolicyOspfAcceptInjectNetListId 1.3.6.1.4.1.2272.1.8.11.14.1.8
Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk.
OBJECT-TYPE    
  INTEGER 0..1000  

rcIpPolicyOspfAcceptExtType 1.3.6.1.4.1.2272.1.8.11.14.1.9
Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any external type 1'. 'type2' means 'match any external type 2
OBJECT-TYPE    
  INTEGER type1(1), type2(2), any(3)  

rcIpPolicyOspfAcceptRowStatus 1.3.6.1.4.1.2272.1.8.11.14.1.10
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpPolicyNetListTableSize 1.3.6.1.4.1.2272.1.8.11.15
Used to indicate the number of entries in the rcIpPolicyNetListTable.
OBJECT-TYPE    
  INTEGER  

rcIpPolicyNetListTable 1.3.6.1.4.1.2272.1.8.11.16
A table used to group rcIpPolicyAddrEntry(s) into a list.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPolicyNetListEntry

rcIpPolicyNetListEntry 1.3.6.1.4.1.2272.1.8.11.16.1
Route entry attributes.
OBJECT-TYPE    
  RcIpPolicyNetListEntry  

rcIpPolicyNetListId 1.3.6.1.4.1.2272.1.8.11.16.1.1
A value that uniquely identifies this list of rcIpPolicyNetListEntry.
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpPolicyNetListName 1.3.6.1.4.1.2272.1.8.11.16.1.3
An administratively-assigned name for this list.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpPolicyNetListIdListSize 1.3.6.1.4.1.2272.1.8.11.16.1.4
Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetListIdList 1.3.6.1.4.1.2272.1.8.11.16.1.5
Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyNetListPolicyIdListSize 1.3.6.1.4.1.2272.1.8.11.16.1.6
Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.
OBJECT-TYPE    
  INTEGER 0..128  

rcIpPolicyNetListPolicyIdList 1.3.6.1.4.1.2272.1.8.11.16.1.7
Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rcIpPolicyNetListRowStatus 1.3.6.1.4.1.2272.1.8.11.16.1.8
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpDvmrp 1.3.6.1.4.1.2272.1.8.12
OBJECT IDENTIFIER    

rcIpDvmrpGlobal 1.3.6.1.4.1.2272.1.8.12.1
OBJECT IDENTIFIER    

rcIpDvmrpGlobalEnable 1.3.6.1.4.1.2272.1.8.12.1.1
The enabled status of IP Multicast Dvmrp routing on this router.
OBJECT-TYPE    
  TruthValue  

rcIpDvmrpGlobalUpdateInterval 1.3.6.1.4.1.2272.1.8.12.1.2
Route upd interval
OBJECT-TYPE    
  INTEGER 10..2000  

rcIpDvmrpGlobalTriggeredUpdateInterval 1.3.6.1.4.1.2272.1.8.12.1.3
Trigger upd interval
OBJECT-TYPE    
  INTEGER 5..1000  

rcIpDvmrpGlobalLeafTimeOut 1.3.6.1.4.1.2272.1.8.12.1.4
Hold down timer for leaf
OBJECT-TYPE    
  INTEGER 25..4000  

rcIpDvmrpGlobalNbrTimeOut 1.3.6.1.4.1.2272.1.8.12.1.5
Time to age out nbr
OBJECT-TYPE    
  INTEGER 35..8000  

rcIpDvmrpGlobalNbrProbeInterval 1.3.6.1.4.1.2272.1.8.12.1.6
How often to send probe
OBJECT-TYPE    
  INTEGER 5..30  

rcIpDvmrpGlobalRouteExpireTimeOut 1.3.6.1.4.1.2272.1.8.12.1.7
This parameter defines the route expiration timeout in seconds.
OBJECT-TYPE    
  INTEGER 20..4000  

rcIpDvmrpGlobalFwdCacheTimeOut 1.3.6.1.4.1.2272.1.8.12.1.8
This is the Forward Cache Value in second. This value is going to be used in aging prune entries in seconds.
OBJECT-TYPE    
  INTEGER 10..86400  

rcIpDvmrpGlobalRouteDiscardTimeOut 1.3.6.1.4.1.2272.1.8.12.1.9
This parameter defines time to garbage collect route in seconds.
OBJECT-TYPE    
  INTEGER 40..8000  

rcIpDvmrpGlobalRouteSwitchTimeOut 1.3.6.1.4.1.2272.1.8.12.1.10
This parameter defines the route discard timeout in seconds.
OBJECT-TYPE    
  INTEGER 20..2000  

rcIpDvmrpTable 1.3.6.1.4.1.2272.1.8.12.2
Dvmrp Interface extension table. This table augments the standard dvmrpInterfaceTable defined in .
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpDvmrpTableEntry

rcIpDvmrpTableEntry 1.3.6.1.4.1.2272.1.8.12.2.1
Entry containing Proprietary DVMRP interface information. An entry is automatically created in this table when an ip address is configured on an interface.
OBJECT-TYPE    
  RcIpDvmrpTableEntry  

rcIpDvmrpTableIfIndex 1.3.6.1.4.1.2272.1.8.12.2.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcIpDvmrpTableEnable 1.3.6.1.4.1.2272.1.8.12.2.1.2
The administrative status of DVMRP in the router. The value 'enabled' denotes that the DVMRP is enableed on the interface; 'disabled' disables it on the interface.
OBJECT-TYPE    
  TruthValue  

rcIpDvmrpTableMetric 1.3.6.1.4.1.2272.1.8.12.2.1.3
Dvmrp cost on this interface.
OBJECT-TYPE    
  INTEGER 1..31  

rcIpDvmrpTableAdvSelf 1.3.6.1.4.1.2272.1.8.12.2.1.4
Used to specify if the local network has to be advertised to neighbors.
OBJECT-TYPE    
  EnableValue  

rcIpDvmrpTableLocalAddr 1.3.6.1.4.1.2272.1.8.12.2.1.5
The IP address of this interface.
OBJECT-TYPE    
  IpAddress  

rcIpUdp 1.3.6.1.4.1.2272.1.8.13
OBJECT IDENTIFIER    

rcIpUdpProtocolTableSize 1.3.6.1.4.1.2272.1.8.13.1
Used to indicate the number of entries in the rcIpUdpProtocolTable.
OBJECT-TYPE    
  INTEGER  

rcIpUdpProtocolTable 1.3.6.1.4.1.2272.1.8.13.2
list of UDP protocols. Used to determine whether to forward the UDP broadcast packet or not.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpUdpProtocolEntry

rcIpUdpProtocolEntry 1.3.6.1.4.1.2272.1.8.13.2.1
Used to include a particular UDP port in the table. An entry in this table indicates that the box might do forwarding of UDP broadcast packets if there is a matching entry for this packet in the rcIpUdpPortFwdTable.
OBJECT-TYPE    
  RcIpUdpProtocolEntry  

rcIpUdpProtocolPortNumber 1.3.6.1.4.1.2272.1.8.13.2.1.1
well-known UDP Port number. Pre-assigned port number for this protocol. Port used by the server process as its contact port. It cannot be BOOTP/DHCP port#s 67, 68.
OBJECT-TYPE    
  INTEGER 1..65535  

rcIpUdpProtocolName 1.3.6.1.4.1.2272.1.8.13.2.1.2
Used to indicate the name of the protocol that is running on top of UDP protocol. cannot change the name once created. This should be set while creating the entry.
OBJECT-TYPE    
  DisplayString SIZE(1..15)  

rcIpUdpProtocolRowStatus 1.3.6.1.4.1.2272.1.8.13.2.1.3
Rowstatus of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpUdpPortFwdTableSize 1.3.6.1.4.1.2272.1.8.13.3
Used to indicate the number of entries in the rcIpUdpPortFwdTable.
OBJECT-TYPE    
  INTEGER  

rcIpUdpPortFwdTable 1.3.6.1.4.1.2272.1.8.13.4
Udp forward entry table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpUdpPortFwdEntry

rcIpUdpPortFwdEntry 1.3.6.1.4.1.2272.1.8.13.4.1
An entry is configured to specify forwarding policy parameters.
OBJECT-TYPE    
  RcIpUdpPortFwdEntry  

rcIpUdpPortFwdDestPort 1.3.6.1.4.1.2272.1.8.13.4.1.1
The well-known port number defined for UDP/TCP depending on the value of IpProtoType field in this entry. This port number has to be defined in the rcIpUdpProtoTable. In order to select this policy the destination port number has to match the DestPort value.
OBJECT-TYPE    
  INTEGER 1..65535  

rcIpUdpPortFwdDestAddr 1.3.6.1.4.1.2272.1.8.13.4.1.2
Destination IP address. The IP addres to which the UDP/TCP broadcast should be forwarded. This IP address can be any IP server address or subnet broadcast address. If the IP address is one of the routable interface's address on the router, the frame will be rebroadcast out as a limited broadcast. If the Ip address is that of a server then the received broadcast packet will be sent as a unicast packet to this address.
OBJECT-TYPE    
  IpAddress  

rcIpUdpPortFwdId 1.3.6.1.4.1.2272.1.8.13.4.1.3
Identifier of this entry. Used internally to identify this entry.
OBJECT-TYPE    
  INTEGER  

rcIpUdpPortFwdFwdListIdListSize 1.3.6.1.4.1.2272.1.8.13.4.1.4
Used to indicate the number of id(s) in the rcIpUdpPortFwdListId variable.
OBJECT-TYPE    
  INTEGER 0..32  

rcIpUdpPortFwdFwdListIdList 1.3.6.1.4.1.2272.1.8.13.4.1.5
Used to indicate zero or more rcIpUdpPortFwdListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  IdList SIZE(16)  

rcIpUdpPortFwdNumFwdPackets 1.3.6.1.4.1.2272.1.8.13.4.1.6
The total number of UDP/TCP broadcast packets forwarded using this policy.
OBJECT-TYPE    
  Counter  

rcIpUdpPortFwdNumDropPacketsTtlExpired 1.3.6.1.4.1.2272.1.8.13.4.1.7
The total number of UDP/TCP broadcast packets dropped because the TTL has expired.
OBJECT-TYPE    
  Counter  

rcIpUdpPortFwdNumDropPacketsDestUnreach 1.3.6.1.4.1.2272.1.8.13.4.1.8
The total number of UDP/TCP broadcast packets dropped because the rcIpUdpPortFwdDestAddr specified in this policy was unreachable.
OBJECT-TYPE    
  Counter  

rcIpUdpPortFwdRowStatus 1.3.6.1.4.1.2272.1.8.13.4.1.9
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpUdpPortFwdListTableSize 1.3.6.1.4.1.2272.1.8.13.5
Used to indicate the number of entries in the rcIpUdpPortFwdListTable.
OBJECT-TYPE    
  INTEGER  

rcIpUdpPortFwdListTable 1.3.6.1.4.1.2272.1.8.13.6
A table used to group rcIpUdpPortFwdEntry(s) into a list.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpUdpPortFwdListEntry

rcIpUdpPortFwdListEntry 1.3.6.1.4.1.2272.1.8.13.6.1
Route entry attributes.
OBJECT-TYPE    
  RcIpUdpPortFwdListEntry  

rcIpUdpPortFwdListId 1.3.6.1.4.1.2272.1.8.13.6.1.1
A value that uniquely identifies this list of rcIpUdpPortFwdListEntry.
OBJECT-TYPE    
  INTEGER 1..1000  

rcIpUdpPortFwdListName 1.3.6.1.4.1.2272.1.8.13.6.1.3
An administratively-assigned name for this list.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

rcIpUdpPortFwdListFwdIdListSize 1.3.6.1.4.1.2272.1.8.13.6.1.4
Used to indicate the number of rcIpUdpPortFwdNetEntry id(s) in the rcIpUdpPortFwdListIdList variable.
OBJECT-TYPE    
  INTEGER 0..48  

rcIpUdpPortFwdListFwdIdList 1.3.6.1.4.1.2272.1.8.13.6.1.5
Used to indicate zero or more UdpPortFwd entries that are associated to this list. Each entry identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
OBJECT-TYPE    
  OCTET STRING SIZE(96)  

rcIpUdpPortFwdListRowStatus 1.3.6.1.4.1.2272.1.8.13.6.1.6
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcIpUdpConfBroadcastIntfTableSize 1.3.6.1.4.1.2272.1.8.13.7
Used to indicate the number of entries in the rcIpUdpBroadcastIntfTable.
OBJECT-TYPE    
  INTEGER  

rcIpUdpConfBroadcastIntfTable 1.3.6.1.4.1.2272.1.8.13.8
IP broadcast forward configuration table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpUdpConfBroadcastIntfEntry

rcIpUdpConfBroadcastIntfEntry 1.3.6.1.4.1.2272.1.8.13.8.1
Used to configure UDP broadcast forward on a particular interface.
OBJECT-TYPE    
  RcIpUdpConfBroadcastIntfEntry  

rcIpUdpConfBroadcastIntfLocalIfAddr 1.3.6.1.4.1.2272.1.8.13.8.1.1
The ip address of the local interface that is partipating in the forwarding UDP broadcast packets.
OBJECT-TYPE    
  IpAddress  

rcIpUdpConfBroadcastIntfUdpPortFwdListId 1.3.6.1.4.1.2272.1.8.13.8.1.2
Used to indicate the number UDP ports that this interface is configured to forward. A value of '0' indicates that this interface will not forward any UDP broadcast packets. This is a required field to create an entry.
OBJECT-TYPE    
  INTEGER 0..100  

rcIpUdpConfBroadcastIntfMaxTtl 1.3.6.1.4.1.2272.1.8.13.8.1.3
Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device.
OBJECT-TYPE    
  INTEGER 1..16  

rcIpUdpConfBroadcastIntfNumRxPkts 1.3.6.1.4.1.2272.1.8.13.8.1.4
The total number of UDP/TCP broadcast packets received by this local interface.
OBJECT-TYPE    
  Counter  

rcIpUdpConfBroadcastIntfNumFwdPkts 1.3.6.1.4.1.2272.1.8.13.8.1.5
The total number of UDP/TCP broadcast packets forwarded.
OBJECT-TYPE    
  Counter  

rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired 1.3.6.1.4.1.2272.1.8.13.8.1.6
The total number of UDP/TCP broadcast packets dropped because the TTL has expired.
OBJECT-TYPE    
  Counter  

rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach 1.3.6.1.4.1.2272.1.8.13.8.1.7
The total number of UDP broadcast packets dropped because the destination was unreachable.
OBJECT-TYPE    
  Counter  

rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort 1.3.6.1.4.1.2272.1.8.13.8.1.8
The total number of UDP/TCP broadcast packets dropped because the destination port/protocol specified has no matching forwarding policy.
OBJECT-TYPE    
  Counter  

rcIpUdpConfBroadcastIntfRowStatus 1.3.6.1.4.1.2272.1.8.13.8.1.9
Entry row status.
OBJECT-TYPE    
  RowStatus  

rcIpTosRule 1.3.6.1.4.1.2272.1.8.14
OBJECT IDENTIFIER    

rcIpTosRuleAndMask 1.3.6.1.4.1.2272.1.8.14.1
And Mask. The Ip ToS byte in the Ip header is logically ANDed with this value, and then logically ORed with the one of the OrRules below.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpTosRuleOrRule1 1.3.6.1.4.1.2272.1.8.14.2
Quid/Gid Or rule #1. The Ip ToS byte in the Ip header is logically ORed with this value.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpTosRuleOrRule2 1.3.6.1.4.1.2272.1.8.14.3
Quid/Gid Or rule #2. The Ip ToS byte in the Ip header is logically ORed with this value.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpTosRuleOrRule3 1.3.6.1.4.1.2272.1.8.14.4
Quid/Gid Or rule #3. The Ip ToS byte in the Ip header is logically ORed with this value.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpTosRuleTosPriorityEnable 1.3.6.1.4.1.2272.1.8.14.5
Enable Tos priority.
OBJECT-TYPE    
  TruthValue  

rcIpTosRuleTosThreshold 1.3.6.1.4.1.2272.1.8.14.6
tos threshold
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcIpStaticRoute 1.3.6.1.4.1.2272.1.8.15
OBJECT IDENTIFIER    

rcIpStaticRouteTableSize 1.3.6.1.4.1.2272.1.8.15.1
size of Ip Static Route Table.
OBJECT-TYPE    
  INTEGER  

rcIpStaticRouteTable 1.3.6.1.4.1.2272.1.8.15.2
This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpStaticRouteEntry

rcIpStaticRouteEntry 1.3.6.1.4.1.2272.1.8.15.2.1
A static route to a particular destination.
OBJECT-TYPE    
  RcIpStaticRouteEntry  

rcIpStaticRouteDest 1.3.6.1.4.1.2272.1.8.15.2.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

rcIpStaticRouteMask 1.3.6.1.4.1.2272.1.8.15.2.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

rcIpStaticRouteNextHop 1.3.6.1.4.1.2272.1.8.15.2.1.3
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).
OBJECT-TYPE    
  IpAddress  

rcIpStaticRouteMetric 1.3.6.1.4.1.2272.1.8.15.2.1.4
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER 1..'FFFF'h  

rcIpStaticRouteIfIndex 1.3.6.1.4.1.2272.1.8.15.2.1.5
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcIpStaticRoutePreference 1.3.6.1.4.1.2272.1.8.15.2.1.6
Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference.
OBJECT-TYPE    
  INTEGER 1..255  

rcIpStaticRouteEnable 1.3.6.1.4.1.2272.1.8.15.2.1.7
Used to enable/disable this entry.
OBJECT-TYPE    
  TruthValue  

rcIpStaticRouteStatus 1.3.6.1.4.1.2272.1.8.15.2.1.8
Used to indicate the current status of this entry.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

rcIpStaticRouteRowStatus 1.3.6.1.4.1.2272.1.8.15.2.1.9
Used to create/delete entries
OBJECT-TYPE    
  RowStatus  

rcIpStaticRouteLocalNextHop 1.3.6.1.4.1.2272.1.8.15.2.1.10
Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route.
OBJECT-TYPE    
  TruthValue  

rcIpPim 1.3.6.1.4.1.2272.1.8.16
OBJECT IDENTIFIER    

rcIpPimGlobal 1.3.6.1.4.1.2272.1.8.16.1
OBJECT IDENTIFIER    

rcIpPimGlobalEnable 1.3.6.1.4.1.2272.1.8.16.1.1
enable feature
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalMode 1.3.6.1.4.1.2272.1.8.16.1.2
OBJECT-TYPE    
  INTEGER dm(1), sm(2), smdm(3)  

rcIpPimGlobalMbr 1.3.6.1.4.1.2272.1.8.16.1.3
enable/disable pim multicast border router feature
OBJECT-TYPE    
  TruthValue  

rcIpPimGlobalRegisterSuppTimer 1.3.6.1.4.1.2272.1.8.16.1.4
Each source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register- Suppression-timer is started by the Register-Stop message; upon expiration, the source's DR resumes sending data packets to the RP, encapsulated in the Register message.
OBJECT-TYPE    
  INTEGER 5..65535  

rcIpPimGlobalInterfaceTableSize 1.3.6.1.4.1.2272.1.8.16.1.5
table size
OBJECT-TYPE    
  INTEGER  

rcIpPimTable 1.3.6.1.4.1.2272.1.8.16.2
IP Pim table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimEntry

rcIpPimEntry 1.3.6.1.4.1.2272.1.8.16.2.1
An entry of Ip Pim Table.
OBJECT-TYPE    
  RcIpPimEntry  

rcIpPimIfIndex 1.3.6.1.4.1.2272.1.8.16.2.1.1
port
OBJECT-TYPE    
  InterfaceIndex  

rcIpPimEnable 1.3.6.1.4.1.2272.1.8.16.2.1.2
enable interface
OBJECT-TYPE    
  TruthValue  

rcIpPimMode 1.3.6.1.4.1.2272.1.8.16.2.1.3
OBJECT-TYPE    
  INTEGER dense(1), sparse(2), sparseDense(3)  

rcIpPimHelloInterval 1.3.6.1.4.1.2272.1.8.16.2.1.4
frq. at which hello sent.
OBJECT-TYPE    
  INTEGER 0..18724  

rcIpPimJoinPruneInterval 1.3.6.1.4.1.2272.1.8.16.2.1.5
OBJECT-TYPE    
  INTEGER 0..18724  

rcIpPimCBSRPreference 1.3.6.1.4.1.2272.1.8.16.2.1.6
OBJECT-TYPE    
  INTEGER -1..255  

rcIpPimInterfaceTable 1.3.6.1.4.1.2272.1.8.16.3
IP Pim table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPimInterfaceEntry

rcIpPimInterfaceEntry 1.3.6.1.4.1.2272.1.8.16.3.1
An entry of Ip Pim Interface Table.
OBJECT-TYPE    
  RcIpPimInterfaceEntry  

rcIpPimInterfaceIfIndex 1.3.6.1.4.1.2272.1.8.16.3.1.1
port
OBJECT-TYPE    
  InterfaceIndex  

rcIpPimInterfaceOperState 1.3.6.1.4.1.2272.1.8.16.3.1.2
The current operational state of this PIM interface. This object is deprecated in favor of ifOperStatus.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

rcIpPimCurrBsr 1.3.6.1.4.1.2272.1.8.16.5
OBJECT IDENTIFIER    

rcIpPimCurrBsrAddress 1.3.6.1.4.1.2272.1.8.16.5.1
Current BSR address
OBJECT-TYPE    
  IpAddress  

rcIpPimCurrBsrFragmentTag 1.3.6.1.4.1.2272.1.8.16.5.2
Current BSR Fragment Tag
OBJECT-TYPE    
  INTEGER  

rcIpPimCurrBsrHashMask 1.3.6.1.4.1.2272.1.8.16.5.3
Current BSR Hash Mask value
OBJECT-TYPE    
  IpAddress  

rcIpPimCurrBsrPriority 1.3.6.1.4.1.2272.1.8.16.5.4
Current BSR Priority
OBJECT-TYPE    
  INTEGER  

rcIpPimCurrBsrBootstrapTimer 1.3.6.1.4.1.2272.1.8.16.5.5
Current BSR Bootstrap Timer
OBJECT-TYPE    
  INTEGER  

rcIpMulticastArpTable 1.3.6.1.4.1.2272.1.8.17
IP Multicast Arp table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMulticastArpEntry

rcIpMulticastArpEntry 1.3.6.1.4.1.2272.1.8.17.1
An entry of Ip Multicast Arp Table.
OBJECT-TYPE    
  RcIpMulticastArpEntry  

rcIpMulticastArpVlanId 1.3.6.1.4.1.2272.1.8.17.1.1
vlan id
OBJECT-TYPE    
  INTEGER  

rcIpMulticastArpMacAddress 1.3.6.1.4.1.2272.1.8.17.1.2
multicast mac address
OBJECT-TYPE    
  MacAddress  

rcIpMulticastArpIpAddress 1.3.6.1.4.1.2272.1.8.17.1.3
multicast ip address
OBJECT-TYPE    
  IpAddress  

rcIpMulticastArpPorts 1.3.6.1.4.1.2272.1.8.17.1.4
ports within a particular vlan
OBJECT-TYPE    
  PortSet  

rcIpMulticastArpNumMltIds 1.3.6.1.4.1.2272.1.8.17.1.5
number of mlt ids
OBJECT-TYPE    
  INTEGER  

rcIpMulticastArpMltIds 1.3.6.1.4.1.2272.1.8.17.1.6
mlt id
OBJECT-TYPE    
  IdList  

rcIpMulticastArpRowStatus 1.3.6.1.4.1.2272.1.8.17.1.7
row status
OBJECT-TYPE    
  RowStatus  

rcIpMulticastTable 1.3.6.1.4.1.2272.1.8.18
Ip multicast table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMulticastEntry

rcIpMulticastEntry 1.3.6.1.4.1.2272.1.8.18.1
Entry containing Proprietary Ip Multicast information.
OBJECT-TYPE    
  RcIpMulticastEntry  

rcIpMulticastIfIndex 1.3.6.1.4.1.2272.1.8.18.1.1
IfIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcIpMulticastMulticastIp 1.3.6.1.4.1.2272.1.8.18.1.2
IP Address on this IfIndex to be used for all Multicast protocols running on this interface.
OBJECT-TYPE    
  IpAddress  

rcIpCops 1.3.6.1.4.1.2272.1.8.19
OBJECT IDENTIFIER    

rcCopsGlobalEnable 1.3.6.1.4.1.2272.1.8.19.1
Cops feature enable/disable
OBJECT-TYPE    
  TruthValue  

rcIpRipInterface 1.3.6.1.4.1.2272.1.8.20
OBJECT IDENTIFIER    

rcIpRipInterfaceTable 1.3.6.1.4.1.2272.1.8.20.1
IP Rip Interface table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRipInterfaceEntry

rcIpRipInterfaceEntry 1.3.6.1.4.1.2272.1.8.20.1.1
An entry of Ip Rip Interface Table.
OBJECT-TYPE    
  RcIpRipInterfaceEntry  

rcIpRipInterfaceAddress 1.3.6.1.4.1.2272.1.8.20.1.1.1
Ip Address
OBJECT-TYPE    
  IpAddress  

rcIpRipInterfaceIfIndex 1.3.6.1.4.1.2272.1.8.20.1.1.2
Rip Interface If Index.
OBJECT-TYPE    
  InterfaceIndex  

rcIpRipInterfaceRipEnable 1.3.6.1.4.1.2272.1.8.20.1.1.3
OBJECT-TYPE    
  EnableValue  

rcIpRipInterfaceAccDefRte 1.3.6.1.4.1.2272.1.8.20.1.1.4
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceAdvDefRte 1.3.6.1.4.1.2272.1.8.20.1.1.5
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceAutoAggregate 1.3.6.1.4.1.2272.1.8.20.1.1.6
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceCost 1.3.6.1.4.1.2272.1.8.20.1.1.7
OBJECT-TYPE    
  INTEGER  

rcIpRipInterfaceListen 1.3.6.1.4.1.2272.1.8.20.1.1.8
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfacePoison 1.3.6.1.4.1.2272.1.8.20.1.1.9
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceSupply 1.3.6.1.4.1.2272.1.8.20.1.1.10
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceTriggeredUpdate 1.3.6.1.4.1.2272.1.8.20.1.1.11
OBJECT-TYPE    
  TruthValue  

rcIpRipInterfaceInPolicy 1.3.6.1.4.1.2272.1.8.20.1.1.12
OBJECT-TYPE    
  DisplayString  

rcIpRipInterfaceOutPolicy 1.3.6.1.4.1.2272.1.8.20.1.1.13
OBJECT-TYPE    
  DisplayString  

rcIpMulticastTimedPruneTable 1.3.6.1.4.1.2272.1.8.21
This feature provides the ability for the user to create (S,G) Forwarding Entries that would not be pruned until a configurable timer expires. This feature is targeted for Passport 8600. Currently the timer value is set to 0.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMulticastTimedPruneEntry

rcIpMulticastTimedPruneEntry 1.3.6.1.4.1.2272.1.8.21.1
An entry of Ip Multicast Timed Prune Table.
OBJECT-TYPE    
  RcIpMulticastTimedPruneEntry  

rcIpMulticastTimedPruneGroupAddress 1.3.6.1.4.1.2272.1.8.21.1.1
This field indicates the IP Multicast Group Address associated with the IP multicast stream.
OBJECT-TYPE    
  IpAddress  

rcIpMulticastTimedPruneSourceAddress 1.3.6.1.4.1.2272.1.8.21.1.2
This is the Source Subnet IP address of the sender of the IP multicast stream.
OBJECT-TYPE    
  IpAddress  

rcIpMulticastTimedPruneSrcSubnetMask 1.3.6.1.4.1.2272.1.8.21.1.3
This is the Source Subnet Mask IP address of the sender of the IP multicast stream.
OBJECT-TYPE    
  IpAddress  

rcIpMulticastTimedPruneAgingTimer 1.3.6.1.4.1.2272.1.8.21.1.4
This field represents the amount of time (in minutes) this timed prune entry will be kept in the forwarding table when there are no more receivers. After this timer expires, this timed prune entry would be treated as a normal DVMRP/PIM forwarding entry. Aging Timer value of 0 (infinite time) indicates this timed prune entry will not be deleted even when there are no more receivers.
OBJECT-TYPE    
  INTEGER  

rcIpMulticastTimedPruneTimeLeft 1.3.6.1.4.1.2272.1.8.21.1.5
This read-only field represents the remaining time for which this timed prune entry will be kept in the forwarding table. After this timer expires, this timed prune entry would be treated as a normal DVMRP/PIM forwarding entry. 0 in this field indicates that this entry would not be aged out.
OBJECT-TYPE    
  INTEGER  

rcIpMulticastTimedPruneLastActivity 1.3.6.1.4.1.2272.1.8.21.1.6
This read-only field represents the actual time since the traffic has come from this Source, Group pair.
OBJECT-TYPE    
  TimeTicks  

rcIpMulticastTimedPruneRowStatus 1.3.6.1.4.1.2272.1.8.21.1.7
row status
OBJECT-TYPE    
  RowStatus  

rcIpMulticastSoftwareForwarding 1.3.6.1.4.1.2272.1.8.23
OBJECT IDENTIFIER    

rcIpMulticastSoftwareForwardingEnable 1.3.6.1.4.1.2272.1.8.23.1
Enable/Disable multicast software forwarding.
OBJECT-TYPE    
  TruthValue  

rcIpMulticastSoftwareForwardingThreshold 1.3.6.1.4.1.2272.1.8.23.2
Threshold to switch from software forwarding to hardware forwarding. Unit = pkt per second
OBJECT-TYPE    
  INTEGER 1..65535  

rcIpMrouteHw 1.3.6.1.4.1.2272.1.8.24
OBJECT IDENTIFIER    

rcIpMrouteHwTable 1.3.6.1.4.1.2272.1.8.24.1
The (conceptual) table containing hardware entries of multicast routing information for all the Group Address.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMrouteHwEntry

rcIpMrouteHwEntry 1.3.6.1.4.1.2272.1.8.24.1.1
An entry (conceptual row) containing hardware entries of multicast routing information for a particular Group Address.
OBJECT-TYPE    
  RcIpMrouteHwEntry  

rcIpMrouteHwGroupAddress 1.3.6.1.4.1.2272.1.8.24.1.1.1
The IP multicast group address for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwSubnet 1.3.6.1.4.1.2272.1.8.24.1.1.2
The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwInvlan 1.3.6.1.4.1.2272.1.8.24.1.1.3
The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpMrouteHwPruned 1.3.6.1.4.1.2272.1.8.24.1.1.4
This is to show weather the entry containing multicast routing information has received Prune message or not.
OBJECT-TYPE    
  TruthValue  

rcIpMrouteHwIndex 1.3.6.1.4.1.2272.1.8.24.1.1.5
This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information.
OBJECT-TYPE    
  INTEGER  

rcIpMrouteHwPrunesTable 1.3.6.1.4.1.2272.1.8.24.2
The (conceptual) table containing prune entries of multicast routing information for the Group Address.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMrouteHwPrunesEntry

rcIpMrouteHwPrunesEntry 1.3.6.1.4.1.2272.1.8.24.2.1
An entry (conceptual row) containing prune entries of multicast routing information for a particular Group Address.
OBJECT-TYPE    
  RcIpMrouteHwPrunesEntry  

rcIpMrouteHwPrunesGroupAddress 1.3.6.1.4.1.2272.1.8.24.2.1.1
The IP multicast group address for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwPrunesSubnet 1.3.6.1.4.1.2272.1.8.24.2.1.2
The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwPrunesInvlan 1.3.6.1.4.1.2272.1.8.24.2.1.3
The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpMrouteHwPrunesNeighbor 1.3.6.1.4.1.2272.1.8.24.2.1.4
The IpAddress from where the Prune message has been received.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwPrunesTimer 1.3.6.1.4.1.2272.1.8.24.2.1.5
This is to show how much time is left for this particular entry containing multicast routing information during which the graft message can be sent.
OBJECT-TYPE    
  INTEGER  

rcIpMrouteHwSourcesTable 1.3.6.1.4.1.2272.1.8.24.3
The (conceptual) table containing source entries of multicast routing information for the Group Address.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMrouteHwSourcesEntry

rcIpMrouteHwSourcesEntry 1.3.6.1.4.1.2272.1.8.24.3.1
An entry (conceptual row) containing source entries of multicast routing information for a particular Group Address.
OBJECT-TYPE    
  RcIpMrouteHwSourcesEntry  

rcIpMrouteHwSourcesGroupAddress 1.3.6.1.4.1.2272.1.8.24.3.1.1
The IP multicast group address for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwSourcesSubnet 1.3.6.1.4.1.2272.1.8.24.3.1.2
The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwSourcesInvlan 1.3.6.1.4.1.2272.1.8.24.3.1.3
The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpMrouteHwSourcesAddress 1.3.6.1.4.1.2272.1.8.24.3.1.4
The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwSourcesIngressPort 1.3.6.1.4.1.2272.1.8.24.3.1.5
The Ingress vlan ports from where the traffic is coming, for which this entry contains multicast routing information.
OBJECT-TYPE    
  PortSet  

rcIpMrouteHwEgressVlansTable 1.3.6.1.4.1.2272.1.8.24.4
The (conceptual) table containing egress vlan entries of multicast routing information for the Group Address.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpMrouteHwEgressVlansEntry

rcIpMrouteHwEgressVlansEntry 1.3.6.1.4.1.2272.1.8.24.4.1
An entry (conceptual row) containing egress vlan entries of multicast routing information for a particular Group Address.
OBJECT-TYPE    
  RcIpMrouteHwEgressVlansEntry  

rcIpMrouteHwEgressVlansGroupAddress 1.3.6.1.4.1.2272.1.8.24.4.1.1
The IP multicast group address for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwEgressVlansSubnet 1.3.6.1.4.1.2272.1.8.24.4.1.2
The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.
OBJECT-TYPE    
  IpAddress  

rcIpMrouteHwEgressVlansInvlan 1.3.6.1.4.1.2272.1.8.24.4.1.3
The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpMrouteHwEgressVlansId 1.3.6.1.4.1.2272.1.8.24.4.1.4
The Egress vlan Id from where the traffic is going out for which this entry contains multicast routing information
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpMrouteHwEgressVlansPorts 1.3.6.1.4.1.2272.1.8.24.4.1.5
he Egress vlan ports from where the traffic is going out for which this entry contains multicast routing information.
OBJECT-TYPE    
  PortSet  

rcIpMrouteHwEgressVlansIndex 1.3.6.1.4.1.2272.1.8.24.4.1.6
This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information.
OBJECT-TYPE    
  INTEGER  

rcIpGenPolicy 1.3.6.1.4.1.2272.1.8.100
OBJECT IDENTIFIER    

rcIpAsPathAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.1
table size
OBJECT-TYPE    
  INTEGER  

rcIpAsPathAccessListTable 1.3.6.1.4.1.2272.1.8.100.2
IP As Path Access List table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpAsPathAccessListEntry

rcIpAsPathAccessListEntry 1.3.6.1.4.1.2272.1.8.100.2.1
An entry of Ip As Path Access List Table.
OBJECT-TYPE    
  RcIpAsPathAccessListEntry  

rcIpAsPathAccessListId 1.3.6.1.4.1.2272.1.8.100.2.1.1
Path Access List entry Id.
OBJECT-TYPE    
  INTEGER  

rcIpAsPathAccessListMemberId 1.3.6.1.4.1.2272.1.8.100.2.1.2
frq. at which hello sent.
OBJECT-TYPE    
  INTEGER  

rcIpAsPathAccessListMode 1.3.6.1.4.1.2272.1.8.100.2.1.3
Path Access List Mode, permit or deny.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpAsPathAccessListAsRegularExpression 1.3.6.1.4.1.2272.1.8.100.2.1.4
IP Path Access List Regular Expression
OBJECT-TYPE    
  DisplayString  

rcIpAsPathAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.2.1.5
Table row status.
OBJECT-TYPE    
  RowStatus  

rcIpCommunityAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.3
table size
OBJECT-TYPE    
  INTEGER  

rcIpCommunityAccessListTable 1.3.6.1.4.1.2272.1.8.100.4
IP CommunityAccess List table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpCommunityAccessListEntry

rcIpCommunityAccessListEntry 1.3.6.1.4.1.2272.1.8.100.4.1
An entry of Ip CommunityAccess List Table.
OBJECT-TYPE    
  RcIpCommunityAccessListEntry  

rcIpCommunityAccessListId 1.3.6.1.4.1.2272.1.8.100.4.1.1
IP CommunityAccess entry List Id
OBJECT-TYPE    
  INTEGER  

rcIpCommunityAccessListMemberId 1.3.6.1.4.1.2272.1.8.100.4.1.2
frq. at which hello sent.
OBJECT-TYPE    
  INTEGER  

rcIpCommunityAccessListMode 1.3.6.1.4.1.2272.1.8.100.4.1.3
IP Community Access List Mode, permit or deny.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpCommunityAccessListCommunity 1.3.6.1.4.1.2272.1.8.100.4.1.4
IP Community Access List Community string.
OBJECT-TYPE    
  DisplayString  

rcIpCommunityAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.4.1.5
IP Community Access Table Row Status.
OBJECT-TYPE    
  RowStatus  

rcIpAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.5
table size
OBJECT-TYPE    
  INTEGER  

rcIpAccessListTable 1.3.6.1.4.1.2272.1.8.100.6
IP Access List table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpAccessListEntry

rcIpAccessListEntry 1.3.6.1.4.1.2272.1.8.100.6.1
An entry of Ip Access List Table.
OBJECT-TYPE    
  RcIpAccessListEntry  

rcIpAccessListId 1.3.6.1.4.1.2272.1.8.100.6.1.1
OBJECT-TYPE    
  INTEGER 1..99  

rcIpAccessListMode 1.3.6.1.4.1.2272.1.8.100.6.1.2
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpAccessListNetwork 1.3.6.1.4.1.2272.1.8.100.6.1.3
OBJECT-TYPE    
  IpAddress  

rcIpAccessListNetworkMask 1.3.6.1.4.1.2272.1.8.100.6.1.4
OBJECT-TYPE    
  IpAddress  

rcIpAccessListName 1.3.6.1.4.1.2272.1.8.100.6.1.5
OBJECT-TYPE    
  DisplayString  

rcIpAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.6.1.6
OBJECT-TYPE    
  RowStatus  

rcIpExtendedAccessListTableSize 1.3.6.1.4.1.2272.1.8.100.7
table size
OBJECT-TYPE    
  INTEGER  

rcIpExtendedAccessListTable 1.3.6.1.4.1.2272.1.8.100.8
IP Extended Access List table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpExtendedAccessListEntry

rcIpExtendedAccessListEntry 1.3.6.1.4.1.2272.1.8.100.8.1
An entry of Ip Extended Access List Table.
OBJECT-TYPE    
  RcIpExtendedAccessListEntry  

rcIpExtendedAccessListId 1.3.6.1.4.1.2272.1.8.100.8.1.1
OBJECT-TYPE    
  INTEGER 100..199  

rcIpExtendedAccessListMode 1.3.6.1.4.1.2272.1.8.100.8.1.2
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpExtendedAccessListNetwork 1.3.6.1.4.1.2272.1.8.100.8.1.3
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkWildCard 1.3.6.1.4.1.2272.1.8.100.8.1.4
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkMask 1.3.6.1.4.1.2272.1.8.100.8.1.5
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListNetworkMaskWildCard 1.3.6.1.4.1.2272.1.8.100.8.1.6
OBJECT-TYPE    
  IpAddress  

rcIpExtendedAccessListName 1.3.6.1.4.1.2272.1.8.100.8.1.7
OBJECT-TYPE    
  DisplayString  

rcIpExtendedAccessListRowStatus 1.3.6.1.4.1.2272.1.8.100.8.1.8
OBJECT-TYPE    
  RowStatus  

rcIpPrefixListTableSize 1.3.6.1.4.1.2272.1.8.100.9
table size
OBJECT-TYPE    
  INTEGER  

rcIpPrefixListTable 1.3.6.1.4.1.2272.1.8.100.10
IP Prefix List table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpPrefixListEntry

rcIpPrefixListEntry 1.3.6.1.4.1.2272.1.8.100.10.1
An entry of Ip Prefix List Table.
OBJECT-TYPE    
  RcIpPrefixListEntry  

rcIpPrefixListId 1.3.6.1.4.1.2272.1.8.100.10.1.1
ListId
OBJECT-TYPE    
  INTEGER  

rcIpPrefixListPrefix 1.3.6.1.4.1.2272.1.8.100.10.1.2
Is a member of a specific prefix list. Adding the prefix to the given prefix list
OBJECT-TYPE    
  IpAddress  

rcIpPrefixListPrefixMaskLen 1.3.6.1.4.1.2272.1.8.100.10.1.3
prefix mask length
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListMaskLenFrom 1.3.6.1.4.1.2272.1.8.100.10.1.4
used with mask len
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListMaskLenUpto 1.3.6.1.4.1.2272.1.8.100.10.1.5
used with mask len
OBJECT-TYPE    
  INTEGER 0..32  

rcIpPrefixListName 1.3.6.1.4.1.2272.1.8.100.10.1.6
list name
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

rcIpPrefixListRowStatus 1.3.6.1.4.1.2272.1.8.100.10.1.7
row status
OBJECT-TYPE    
  RowStatus  

rcIpRoutePolicyTableSize 1.3.6.1.4.1.2272.1.8.100.11
table size
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicyApply 1.3.6.1.4.1.2272.1.8.100.12
OBJECT-TYPE    
  TruthValue  

rcIpRoutePolicyTable 1.3.6.1.4.1.2272.1.8.100.13
IP Route Map table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRoutePolicyEntry

rcIpRoutePolicyEntry 1.3.6.1.4.1.2272.1.8.100.13.1
An entry of Ip Route Map Table.
OBJECT-TYPE    
  RcIpRoutePolicyEntry  

rcIpRoutePolicyId 1.3.6.1.4.1.2272.1.8.100.13.1.1
Index used to identify a group of policies in the route policy tableRoute map id
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySequenceNumber 1.3.6.1.4.1.2272.1.8.100.13.1.2
second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicyName 1.3.6.1.4.1.2272.1.8.100.13.1.3
Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence number, whereas with in a group the sequence number must be different.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

rcIpRoutePolicyEnable 1.3.6.1.4.1.2272.1.8.100.13.1.4
Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used.
OBJECT-TYPE    
  TruthValue  

rcIpRoutePolicyMode 1.3.6.1.4.1.2272.1.8.100.13.1.5
specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, deny indicates ignore the route. Continue means continue checking the next match criteria set in the next policy seq, if none take the default action in the given context.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

rcIpRoutePolicyMatchProtocol 1.3.6.1.4.1.2272.1.8.100.13.1.6
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(4), ospf(8), bgp(16), any(31)  

rcIpRoutePolicyMatchAsPath 1.3.6.1.4.1.2272.1.8.100.13.1.7
Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchCommunity 1.3.6.1.4.1.2272.1.8.100.13.1.8
Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchCommunityExact 1.3.6.1.4.1.2272.1.8.100.13.1.9
If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched).
OBJECT-TYPE    
  EnableValue  

rcIpRoutePolicyMatchNetwork 1.3.6.1.4.1.2272.1.8.100.13.1.10
can specify one or more prefix list name or id(s)
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchIpRouteSource 1.3.6.1.4.1.2272.1.8.100.13.1.11
In case of Rip routes this is equivalent to RipInterface. Can specify one or more prefix list name(s) or id(s) seperated by comma.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchNextHop 1.3.6.1.4.1.2272.1.8.100.13.1.12
In case of Rip routes this is equivalent to RipGateway. Can specify one or more prefix list name(s) or id(s) seperated by comma.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchInterface 1.3.6.1.4.1.2272.1.8.100.13.1.13
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyMatchRouteType 1.3.6.1.4.1.2272.1.8.100.13.1.14
For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs to local autonomous system). External (type1|type2) refers to the routes learned from other ASs and imported as either type1 or type2. if type1/type2 is specified then match only type1/type2.
OBJECT-TYPE    
  INTEGER any(0), local(1), internal(2), external(3), externaltype1(4), externaltype2(5)  

rcIpRoutePolicyMatchMetric 1.3.6.1.4.1.2272.1.8.100.13.1.15
Match mec field in the incoming advertisement.
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpRoutePolicyMatchTag 1.3.6.1.4.1.2272.1.8.100.13.1.16
specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values..
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetRoutePreference 1.3.6.1.4.1.2272.1.8.100.13.1.17
if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values..
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRoutePolicySetAsPath 1.3.6.1.4.1.2272.1.8.100.13.1.18
The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string..
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetAsPathMode 1.3.6.1.4.1.2272.1.8.100.13.1.19
It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path.
OBJECT-TYPE    
  INTEGER tag(1), prepend(2)  

rcIpRoutePolicySetAutomaticTag 1.3.6.1.4.1.2272.1.8.100.13.1.20
OBJECT-TYPE    
  EnableValue  

rcIpRoutePolicySetCommunityNumber 1.3.6.1.4.1.2272.1.8.100.13.1.21
this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicySetCommunityMode 1.3.6.1.4.1.2272.1.8.100.13.1.22
this value can be either append or none none - remove the community-number specified in SetCommunityNumber. additive - adds the community-number specified in SetCommunityNumber to the community list attribute. Applicable to BGP advertisments.
OBJECT-TYPE    
  INTEGER none(0), append(1)  

rcIpRoutePolicySetMetricTypeInternal 1.3.6.1.4.1.2272.1.8.100.13.1.23
Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySetMetric 1.3.6.1.4.1.2272.1.8.100.13.1.24
Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal value defined for protocol
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpRoutePolicySetMetricType 1.3.6.1.4.1.2272.1.8.100.13.1.25
Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy.
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRoutePolicySetNextHop 1.3.6.1.4.1.2272.1.8.100.13.1.26
IpAddress of the next hop router.
OBJECT-TYPE    
  IpAddress  

rcIpRoutePolicySetOrigin 1.3.6.1.4.1.2272.1.8.100.13.1.27
igp/egp/incomplete Applicable to BGP protocol only. If not set uses the route origin from the Ip routing table (protocol).
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3)  

rcIpRoutePolicySetLocalPref 1.3.6.1.4.1.2272.1.8.100.13.1.28
this value will be used during route decision process in the BGP protocol. Applicable to BGP only.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySetOriginEgpAs 1.3.6.1.4.1.2272.1.8.100.13.1.29
indicates the Remote autonomous sys number. Applicable to BGP only.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySetTag 1.3.6.1.4.1.2272.1.8.100.13.1.30
Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySetWeight 1.3.6.1.4.1.2272.1.8.100.13.1.31
Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEntry or FilterListWeight or NeighborWeight. Used for BGP only.
OBJECT-TYPE    
  INTEGER  

rcIpRoutePolicySetInjectNetList 1.3.6.1.4.1.2272.1.8.100.13.1.32
specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement.
OBJECT-TYPE    
  DisplayString  

rcIpRoutePolicyRowStatus 1.3.6.1.4.1.2272.1.8.100.13.1.33
row status
OBJECT-TYPE    
  RowStatus  

rcIpRoutePolicySetMask 1.3.6.1.4.1.2272.1.8.100.13.1.34
Set Mask Ip Address
OBJECT-TYPE    
  IpAddress  

rcIpRoutePolicyNssaPbit 1.3.6.1.4.1.2272.1.8.100.13.1.35
Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs associated with that route policy will have P bit cleared, with this intact NSSA ABR will not perform translation of these LSAs to type 5.
OBJECT-TYPE    
  EnableValue  

rcIpRedistributeTableSize 1.3.6.1.4.1.2272.1.8.100.14
table size
OBJECT-TYPE    
  INTEGER  

rcIpRedistributeApply 1.3.6.1.4.1.2272.1.8.100.15
OBJECT-TYPE    
  TruthValue  

rcIpRedistributeTable 1.3.6.1.4.1.2272.1.8.100.16
IP Redistribute table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRedistributeEntry

rcIpRedistributeEntry 1.3.6.1.4.1.2272.1.8.100.16.1
An entry of Ip Redistribute Table.
OBJECT-TYPE    
  RcIpRedistributeEntry  

rcIpRedistributeProtocol 1.3.6.1.4.1.2272.1.8.100.16.1.1
Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info.
OBJECT-TYPE    
  INTEGER ospf(1), bgp(2)  

rcIpRedistributeRouteSource 1.3.6.1.4.1.2272.1.8.100.16.1.2
equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this source.
OBJECT-TYPE    
  INTEGER direct(1), static(2), rip(3), ospf(4), bgp(5)  

rcIpRedistributeEnable 1.3.6.1.4.1.2272.1.8.100.16.1.3
Enable/Disable. By default this is enabled.
OBJECT-TYPE    
  EnableValue  

rcIpRedistributeMetric 1.3.6.1.4.1.2272.1.8.100.16.1.4
value of the metric to be announced in the advertisment
OBJECT-TYPE    
  INTEGER 0..65535  

rcIpRedistributeMetricType 1.3.6.1.4.1.2272.1.8.100.16.1.5
specifies the type of the metric type, useful for OSPF and BGP only.
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

rcIpRedistributeMatchRouteType 1.3.6.1.4.1.2272.1.8.100.16.1.6
used to filter a route based on the route type. applicable to BGP.
OBJECT-TYPE    
  INTEGER internal(1), external1(2), external2(3)  

rcIpRedistributeSetTag 1.3.6.1.4.1.2272.1.8.100.16.1.7
Tag value to be set in the advertisment.
OBJECT-TYPE    
  INTEGER  

rcIpRedistributeSubnets 1.3.6.1.4.1.2272.1.8.100.16.1.8
applicable to OSPF only. Indicates that all the subnets need to be advertised individually.
OBJECT-TYPE    
  INTEGER allow(1), supress(2)  

rcIpRedistributeRoutePolicy 1.3.6.1.4.1.2272.1.8.100.16.1.9
specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.Route map name
OBJECT-TYPE    
  DisplayString  

rcIpRedistributeASNumber 1.3.6.1.4.1.2272.1.8.100.16.1.10
Autonomous system number. Used only for the BGP protocol.
OBJECT-TYPE    
  INTEGER  

rcIpRedistributeWeight 1.3.6.1.4.1.2272.1.8.100.16.1.11
used only for the BGP protocol.
OBJECT-TYPE    
  INTEGER  

rcIpRedistributeDefaultOriginate 1.3.6.1.4.1.2272.1.8.100.16.1.12
indicates the given protocol will originate/advertise a default route.
OBJECT-TYPE    
  INTEGER  

rcIpRedistributeRowStatus 1.3.6.1.4.1.2272.1.8.100.16.1.13
row status
OBJECT-TYPE    
  RowStatus  

rcIpOspfInFilterTableSize 1.3.6.1.4.1.2272.1.8.100.17
table size
OBJECT-TYPE    
  INTEGER  

rcIpOspfInFilterApply 1.3.6.1.4.1.2272.1.8.100.18
OBJECT-TYPE    
  TruthValue  

rcIpOspfInFilterTable 1.3.6.1.4.1.2272.1.8.100.19
IP Ospf In Filter table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpOspfInFilterEntry

rcIpOspfInFilterEntry 1.3.6.1.4.1.2272.1.8.100.19.1
An entry of Ip Ospf In Filter Table.
OBJECT-TYPE    
  RcIpOspfInFilterEntry  

rcIpOspfInFilterAdvertisingRtr 1.3.6.1.4.1.2272.1.8.100.19.1.1
OBJECT-TYPE    
  IpAddress  

rcIpOspfInFilterEnable 1.3.6.1.4.1.2272.1.8.100.19.1.2
IfIndex
OBJECT-TYPE    
  EnableValue  

rcIpOspfInFilterMetricType 1.3.6.1.4.1.2272.1.8.100.19.1.3
OBJECT-TYPE    
  INTEGER type1(1), type2(2), any(3)  

rcIpOspfInFilterPolicyName 1.3.6.1.4.1.2272.1.8.100.19.1.4
OBJECT-TYPE    
  DisplayString  

rcIpOspfInFilterRowStatus 1.3.6.1.4.1.2272.1.8.100.19.1.5
OBJECT-TYPE    
  RowStatus  

rcIpRoutePrefTableSize 1.3.6.1.4.1.2272.1.8.100.20
table size
OBJECT-TYPE    
  INTEGER  

rcIpRoutePrefTable 1.3.6.1.4.1.2272.1.8.100.21
IP Route Pref table
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpRoutePrefEntry

rcIpRoutePrefEntry 1.3.6.1.4.1.2272.1.8.100.21.1
An entry of Ip Route Pref Table.
OBJECT-TYPE    
  RcIpRoutePrefEntry  

rcIpRoutePrefProtocol 1.3.6.1.4.1.2272.1.8.100.21.1.1
Protocol
OBJECT-TYPE    
  INTEGER local(1), static(2), mpls(3), ospfIntra(4), ospfInter(5), isisLevel1(6), isisLevel2(7), bgp(8), rip(9), ospfExternal1(10), ospfExternal2(11)  

rcIpRoutePrefDefault 1.3.6.1.4.1.2272.1.8.100.21.1.2
Shows the default preference value for the given protocol.
OBJECT-TYPE    
  INTEGER 0..255  

rcIpRoutePrefConfigured 1.3.6.1.4.1.2272.1.8.100.21.1.3
This value is configurable by the user
OBJECT-TYPE    
  INTEGER 0..255  

rcArp 1.3.6.1.4.1.2272.1.9
OBJECT IDENTIFIER    

rcArpExtLifeTime 1.3.6.1.4.1.2272.1.9.1
The lifetime in minutues of an ARP entry within the system.
OBJECT-TYPE    
  INTEGER  

rcArpExtTable 1.3.6.1.4.1.2272.1.9.2
ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213.
OBJECT-TYPE    
  SEQUENCE OF  
    RcArpExtEntry

rcArpExtEntry 1.3.6.1.4.1.2272.1.9.2.1
Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface.
OBJECT-TYPE    
  RcArpExtEntry  

rcArpExtEntIfIndex 1.3.6.1.4.1.2272.1.9.2.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcArpExtEntDoProxy 1.3.6.1.4.1.2272.1.9.2.1.2
Enable or disable ARP proxy responses on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcArpExtEntDoResp 1.3.6.1.4.1.2272.1.9.2.1.3
Enable or disable the sending of ARP responses on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcArpExtV2Table 1.3.6.1.4.1.2272.1.9.3
ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213.
OBJECT-TYPE    
  SEQUENCE OF  
    RcArpExtV2Entry

rcArpExtV2Entry 1.3.6.1.4.1.2272.1.9.3.1
Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface.
OBJECT-TYPE    
  RcArpExtV2Entry  

rcArpExtV2EntIfIndex 1.3.6.1.4.1.2272.1.9.3.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcArpExtV2EntIpIfAddr 1.3.6.1.4.1.2272.1.9.3.1.2
Ip Address
OBJECT-TYPE    
  IpAddress  

rcArpExtV2EntDoProxy 1.3.6.1.4.1.2272.1.9.3.1.3
Enable or disable ARP proxy responses on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcArpExtV2EntDoResp 1.3.6.1.4.1.2272.1.9.3.1.4
Enable or disable the sending of ARP responses on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRip 1.3.6.1.4.1.2272.1.10
OBJECT IDENTIFIER    

rcRipExtOperation 1.3.6.1.4.1.2272.1.10.1
Enable or disable the operation of RIP on all Interfaces.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtUpdateTime 1.3.6.1.4.1.2272.1.10.2
The time between transmission of RIP updates on all interfaces.
OBJECT-TYPE    
  INTEGER  

rcRipExtTable 1.3.6.1.4.1.2272.1.10.3
RIP extension table. This table augments the standard IfConfTable table in RFC1389.
OBJECT-TYPE    
  SEQUENCE OF  
    RcRipExtEntry

rcRipExtEntry 1.3.6.1.4.1.2272.1.10.3.1
Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface.
OBJECT-TYPE    
  RcRipExtEntry  

rcRipExtEntIfIndex 1.3.6.1.4.1.2272.1.10.3.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcRipExtEntTalk 1.3.6.1.4.1.2272.1.10.3.1.2
Enable or disable RIP transmission on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtEntListen 1.3.6.1.4.1.2272.1.10.3.1.3
Enable or disable RIP reception on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtEntPoison 1.3.6.1.4.1.2272.1.10.3.1.4
Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtV2Table 1.3.6.1.4.1.2272.1.10.4
RIP extension table. This table augments the standard IfConfTable table in RFC1389.
OBJECT-TYPE    
  SEQUENCE OF  
    RcRipExtV2Entry

rcRipExtV2Entry 1.3.6.1.4.1.2272.1.10.4.1
Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface.
OBJECT-TYPE    
  RcRipExtV2Entry  

rcRipExtV2EntIfIndex 1.3.6.1.4.1.2272.1.10.4.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcRipExtV2EntIpIfAddr 1.3.6.1.4.1.2272.1.10.4.1.2
Ip Address.
OBJECT-TYPE    
  IpAddress  

rcRipExtV2EntTalk 1.3.6.1.4.1.2272.1.10.4.1.3
Enable or disable RIP transmission on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtV2EntListen 1.3.6.1.4.1.2272.1.10.4.1.4
Enable or disable RIP reception on the specified interface.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcRipExtV2EntPoison 1.3.6.1.4.1.2272.1.10.4.1.5
Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcTest 1.3.6.1.4.1.2272.1.11
OBJECT IDENTIFIER    

rcTestExtTable 1.3.6.1.4.1.2272.1.11.1
Test extension table. This table augments the standard ifTestTable table in RFC1573.
OBJECT-TYPE    
  SEQUENCE OF  
    RcTestEntry

rcTestEntry 1.3.6.1.4.1.2272.1.11.1.1
Proprietary test variables.
OBJECT-TYPE    
  RcTestEntry  

rcTestExtIfIndex 1.3.6.1.4.1.2272.1.11.1.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcTestExtPassCount 1.3.6.1.4.1.2272.1.11.1.1.2
The number of iterations of the test case that completed successfully.
OBJECT-TYPE    
  INTEGER  

rcTestExtFailCount 1.3.6.1.4.1.2272.1.11.1.1.3
The number of iterations of the test case that failed.
OBJECT-TYPE    
  INTEGER  

rcTestTypes 1.3.6.1.4.1.2272.1.11.2
OBJECT IDENTIFIER    

rcTestTypesFabric 1.3.6.1.4.1.2272.1.11.2.1
OBJECT IDENTIFIER    

rcTestTypesArTable 1.3.6.1.4.1.2272.1.11.2.2
OBJECT IDENTIFIER    

rcTestTypesExtLoopBack 1.3.6.1.4.1.2272.1.11.2.3
OBJECT IDENTIFIER    

rcTestCodes 1.3.6.1.4.1.2272.1.11.3
OBJECT IDENTIFIER    

rcTestCodesNoReceive 1.3.6.1.4.1.2272.1.11.3.1
OBJECT IDENTIFIER    

rcTestCodesBadSeq 1.3.6.1.4.1.2272.1.11.3.2
OBJECT IDENTIFIER    

rcTestCodesBadLen 1.3.6.1.4.1.2272.1.11.3.3
OBJECT IDENTIFIER    

rcTestCodesBadData 1.3.6.1.4.1.2272.1.11.3.4
OBJECT IDENTIFIER    

rcStat 1.3.6.1.4.1.2272.1.12
OBJECT IDENTIFIER    

rcStatTable 1.3.6.1.4.1.2272.1.12.1
A table used to store port statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatEntry

rcStatEntry 1.3.6.1.4.1.2272.1.12.1.1
interface counters
OBJECT-TYPE    
  RcStatEntry  

rcStatPortIndex 1.3.6.1.4.1.2272.1.12.1.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
OBJECT-TYPE    
  InterfaceIndex  

rcStatFrameTooShorts 1.3.6.1.4.1.2272.1.12.1.1.2
The total number of frames that are too short that were encountered on this interface.
OBJECT-TYPE    
  Counter  

rcStatBridgeInUnicastFrames 1.3.6.1.4.1.2272.1.12.1.1.3
The total number of incoming unicast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatBridgeInMulticastFrames 1.3.6.1.4.1.2272.1.12.1.1.4
The total number of incoming multicast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatBridgeInBroadcastFrames 1.3.6.1.4.1.2272.1.12.1.1.5
The total number of incoming broadcast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatBridgeInDiscards 1.3.6.1.4.1.2272.1.12.1.1.6
The total number of frames that were discarded by the bridging entity.
OBJECT-TYPE    
  Counter  

rcStatBridgeOutUnicastFrames 1.3.6.1.4.1.2272.1.12.1.1.7
The total number of outgoing unicast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatBridgeOutMulticastFrames 1.3.6.1.4.1.2272.1.12.1.1.8
The total number of outgoing multicast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatBridgeOutBroadcastFrames 1.3.6.1.4.1.2272.1.12.1.1.9
The total number of outgoing broadcast frames that were bridged.
OBJECT-TYPE    
  Counter  

rcStatRouteInUnicastFrames 1.3.6.1.4.1.2272.1.12.1.1.10
The total number of incoming unicast frames that were routed.
OBJECT-TYPE    
  Counter  

rcStatRouteInMulticastFrames 1.3.6.1.4.1.2272.1.12.1.1.11
The total number of incoming multicast frames that were routed.
OBJECT-TYPE    
  Counter  

rcStatRouteInDiscards 1.3.6.1.4.1.2272.1.12.1.1.12
The total number of frames that were discarded by the routing entity.
OBJECT-TYPE    
  Counter  

rcStatRouteOutUnicastFrames 1.3.6.1.4.1.2272.1.12.1.1.13
The total number of outgoing unicast frames that were routed.
OBJECT-TYPE    
  Counter  

rcStatRouteOutMulticastFrames 1.3.6.1.4.1.2272.1.12.1.1.14
The total number of outgoing multicast frames that were routed.
OBJECT-TYPE    
  Counter  

rcStatStgForwardTransitions 1.3.6.1.4.1.2272.1.12.1.1.15
The number of times this port has transitioned from the Learning state to the Forwarding state.
OBJECT-TYPE    
  Counter  

rcStatStgInConfigBpdus 1.3.6.1.4.1.2272.1.12.1.1.16
OBJECT-TYPE    
  Counter  

rcStatStgInTcnBpdus 1.3.6.1.4.1.2272.1.12.1.1.17
OBJECT-TYPE    
  Counter  

rcStatStgInBadBpdus 1.3.6.1.4.1.2272.1.12.1.1.18
OBJECT-TYPE    
  Counter  

rcStatStgOutConfigBpdus 1.3.6.1.4.1.2272.1.12.1.1.19
OBJECT-TYPE    
  Counter  

rcStatStgOutTcnBpdus 1.3.6.1.4.1.2272.1.12.1.1.20
OBJECT-TYPE    
  Counter  

rcStatBridgeOutFrames 1.3.6.1.4.1.2272.1.12.1.1.21
Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported.
OBJECT-TYPE    
  Counter  

rcStatGigTable 1.3.6.1.4.1.2272.1.12.2
A table used to store Gigport error statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatGigEntry

rcStatGigEntry 1.3.6.1.4.1.2272.1.12.2.1
Gigabit interface error counters
OBJECT-TYPE    
  RcStatGigEntry  

rcStatGigPortIndex 1.3.6.1.4.1.2272.1.12.2.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
OBJECT-TYPE    
  InterfaceIndex  

rcStatGigLinkFailures 1.3.6.1.4.1.2272.1.12.2.1.2
The total number of link failures encountered on this interface.
OBJECT-TYPE    
  Counter  

rcStatGigPacketErrors 1.3.6.1.4.1.2272.1.12.2.1.3
The total number of packet errors encountered on this interface.
OBJECT-TYPE    
  Counter  

rcStatGigCarrierErrors 1.3.6.1.4.1.2272.1.12.2.1.4
The total number of carrier errors encountered on this interface.
OBJECT-TYPE    
  Counter  

rcStatGigLinkInactiveErrors 1.3.6.1.4.1.2272.1.12.2.1.5
The total number of link inactive errors encountered on this interface.
OBJECT-TYPE    
  Counter  

rcStatGigInFlowCtrlPkts 1.3.6.1.4.1.2272.1.12.2.1.6
The total number of flow control packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatGigOutFlowCtrlPkts 1.3.6.1.4.1.2272.1.12.2.1.7
The total number of flow control packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspf 1.3.6.1.4.1.2272.1.12.3
OBJECT IDENTIFIER    

rcStatOspfBuffersAllocated 1.3.6.1.4.1.2272.1.12.3.1
Used to indicate the number of buffers allocated for OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfBuffersFreed 1.3.6.1.4.1.2272.1.12.3.2
Used to indicate the number of buffers that are freed by the OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfBufferAllocFailures 1.3.6.1.4.1.2272.1.12.3.3
Used to indicate the number of times that OSPF has failed to allocate buffers.
OBJECT-TYPE    
  Counter  

rcStatOspfBufferFreeFailures 1.3.6.1.4.1.2272.1.12.3.4
Used to indicate the number of times that OSPF has failed to free buffers.
OBJECT-TYPE    
  Counter  

rcStatOspfTxPackets 1.3.6.1.4.1.2272.1.12.3.5
Used to indicate the number of packets transmitted by OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfRxPackets 1.3.6.1.4.1.2272.1.12.3.6
Used to indicate the number of packets received by OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfTxDropPackets 1.3.6.1.4.1.2272.1.12.3.7
Used to indicate the number of packets dropped before transmitted by OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfRxDropPackets 1.3.6.1.4.1.2272.1.12.3.8
Used to indicate the number of packets dropped before received by OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfRxBadPackets 1.3.6.1.4.1.2272.1.12.3.9
Used to indicate the number of packets received by OSPF that are bad.
OBJECT-TYPE    
  Counter  

rcStatOspfSpfRuns 1.3.6.1.4.1.2272.1.12.3.10
Used to indicate the number of SPF calculatations performed by OSPF.
OBJECT-TYPE    
  Counter  

rcStatOspfLastSpfRun 1.3.6.1.4.1.2272.1.12.3.11
Used to indicate the time(SysUpTime) since the last spf calculated by OSPF.
OBJECT-TYPE    
  TimeTicks  

rcStatOspfLsdbTblSize 1.3.6.1.4.1.2272.1.12.3.12
Used to indicate the number of entries in the linkstate database table.
OBJECT-TYPE    
  Counter  

rcStatIgmp 1.3.6.1.4.1.2272.1.12.4
OBJECT IDENTIFIER    

rcStatIgmpInMsgs 1.3.6.1.4.1.2272.1.12.4.1
Used to indicate the number of Igmp packets received by the device.
OBJECT-TYPE    
  Counter  

rcStatIgmpInErrors 1.3.6.1.4.1.2272.1.12.4.2
Used to indicate the number of Igmp packets received that are with checksum errors.
OBJECT-TYPE    
  Counter  

rcStatIgmpInQueries 1.3.6.1.4.1.2272.1.12.4.3
Used to indicate the number of Igmp queries received by the device.
OBJECT-TYPE    
  Counter  

rcStatIgmpInReports 1.3.6.1.4.1.2272.1.12.4.4
Used to indicate the number of Igmp reports received by the device.
OBJECT-TYPE    
  Counter  

rcStatIgmpInLeaves 1.3.6.1.4.1.2272.1.12.4.5
Used to indicate the number of Igmp Leaves received by the device.
OBJECT-TYPE    
  Counter  

rcStatIgmpInvalid 1.3.6.1.4.1.2272.1.12.4.6
Used to indicate the number of Igmp packets received by the device that contained invalid type.
OBJECT-TYPE    
  Counter  

rcStatIgmpOutMsgs 1.3.6.1.4.1.2272.1.12.4.7
Used to indicate the number of Igmp queries sent by the device.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTable 1.3.6.1.4.1.2272.1.12.5
A table used to store OSPF interface statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatOspfIfEntry

rcStatOspfIfEntry 1.3.6.1.4.1.2272.1.12.5.1
Ospf interface statistics
OBJECT-TYPE    
  RcStatOspfIfEntry  

rcStatOspfIfIndex 1.3.6.1.4.1.2272.1.12.5.1.1
An unique value that is used to identify a physical interface.
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcStatOspfIfRxHellos 1.3.6.1.4.1.2272.1.12.5.1.2
Used to indicate the number hello packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfRxDBDescrs 1.3.6.1.4.1.2272.1.12.5.1.3
Used to indicate the number database descriptor packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfRxLSUpdates 1.3.6.1.4.1.2272.1.12.5.1.4
Used to indicate the number Link state update packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfRxLSReqs 1.3.6.1.4.1.2272.1.12.5.1.5
Used to indicate the number Link state request packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfRxLSAcks 1.3.6.1.4.1.2272.1.12.5.1.6
Used to indicate the number Link state acknowlege packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTxHellos 1.3.6.1.4.1.2272.1.12.5.1.7
Used to indicate the number hello packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTxDBDescrs 1.3.6.1.4.1.2272.1.12.5.1.8
Used to indicate the number database descriptor packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTxLSUpdates 1.3.6.1.4.1.2272.1.12.5.1.9
Used to indicate the number Link state update packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTxLSReqs 1.3.6.1.4.1.2272.1.12.5.1.10
Used to indicate the number Link state request packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfTxLSAcks 1.3.6.1.4.1.2272.1.12.5.1.11
Used to indicate the number Link state acknowlege packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfVersionMismatches 1.3.6.1.4.1.2272.1.12.5.1.12
Used to indicate the number version mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfAreaMismatches 1.3.6.1.4.1.2272.1.12.5.1.13
Used to indicate the number area mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfAuthTypeMismatches 1.3.6.1.4.1.2272.1.12.5.1.14
Used to indicate the number AuthType mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfAuthFailures 1.3.6.1.4.1.2272.1.12.5.1.15
Used to indicate the number Authentication failures.
OBJECT-TYPE    
  Counter  

rcStatOspfIfNetMaskMismatches 1.3.6.1.4.1.2272.1.12.5.1.16
Used to indicate the number net mask mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfHelloIntervalMismatches 1.3.6.1.4.1.2272.1.12.5.1.17
Used to indicate the number hello interval mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfDeadIntervalMismatches 1.3.6.1.4.1.2272.1.12.5.1.18
Used to indicate the number dead interval mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfOptionMismatches 1.3.6.1.4.1.2272.1.12.5.1.19
Used to indicate the number options mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatMlt 1.3.6.1.4.1.2272.1.12.6
OBJECT IDENTIFIER    

rcStatMltIfExtnTable 1.3.6.1.4.1.2272.1.12.6.1
A table used to store Mlt interface statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltIfExtnEntry

rcStatMltIfExtnEntry 1.3.6.1.4.1.2272.1.12.6.1.1
Mlt interface statistics
OBJECT-TYPE    
  RcStatMltIfExtnEntry  

rcStatMltIfExtnMltId 1.3.6.1.4.1.2272.1.12.6.1.1.1
Mlt Id
OBJECT-TYPE    
  INTEGER 1..32  

rcStatMltIfExtnIfInMulticastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.2
multi-pkts to upper
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfInBroadcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.3
broad-pkts to upper
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfOutMulticastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.4
multi-pkts from upper
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfOutBroadcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.5
broad-pkts from upper
OBJECT-TYPE    
  Counter32  

rcStatMltIfExtnIfHCInOctets 1.3.6.1.4.1.2272.1.12.6.1.1.6
The total number of octets received on the MLT interface, including framing characters.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInUcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.7
The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInMulticastPkt 1.3.6.1.4.1.2272.1.12.6.1.1.8
The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCInBroadcastPkt 1.3.6.1.4.1.2272.1.12.6.1.1.9
The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutOctets 1.3.6.1.4.1.2272.1.12.6.1.1.10
The total number of octets transmitted out of the MLT interface, including framing characters.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutUcastPkts 1.3.6.1.4.1.2272.1.12.6.1.1.11
The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutMulticast 1.3.6.1.4.1.2272.1.12.6.1.1.12
The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, this number includes both Group and Functional addresses.
OBJECT-TYPE    
  Counter64  

rcStatMltIfExtnIfHCOutBroadcast 1.3.6.1.4.1.2272.1.12.6.1.1.13
The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter64  

rcStatMltEtherTable 1.3.6.1.4.1.2272.1.12.6.2
A table used to store Mlt Ethernet statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltEtherEntry

rcStatMltEtherEntry 1.3.6.1.4.1.2272.1.12.6.2.1
Mlt enternet statistics
OBJECT-TYPE    
  RcStatMltEtherEntry  

rcStatMltEtherMltId 1.3.6.1.4.1.2272.1.12.6.2.1.1
A value that uniquely identifies the Multi-Link Trunk associated with this entry.
OBJECT-TYPE    
  INTEGER 1..32  

rcStatMltEtherAlignmentErrors 1.3.6.1.4.1.2272.1.12.6.2.1.2
A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

rcStatMltEtherFCSErrors 1.3.6.1.4.1.2272.1.12.6.2.1.3
A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

rcStatMltEtherSingleCollFrames 1.3.6.1.4.1.2272.1.12.6.2.1.4
A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and it not counted by the corresponding instance of the MultipleCollisionFrames object.
OBJECT-TYPE    
  Counter  

rcStatMltEtherMultipleCollFrames 1.3.6.1.4.1.2272.1.12.6.2.1.5
A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the SingleCollisionFrames objects.
OBJECT-TYPE    
  Counter  

rcStatMltEtherSQETestError 1.3.6.1.4.1.2272.1.12.6.2.1.6
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error.
OBJECT-TYPE    
  Counter  

rcStatMltEtherDeferredTransmiss 1.3.6.1.4.1.2272.1.12.6.2.1.7
A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
OBJECT-TYPE    
  Counter  

rcStatMltEtherLateCollisions 1.3.6.1.4.1.2272.1.12.6.2.1.8
The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 mb/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
OBJECT-TYPE    
  Counter  

rcStatMltEtherExcessiveCollis 1.3.6.1.4.1.2272.1.12.6.2.1.9
A count of frames for which transmission on a particular MLT fails due to excessive collisions.
OBJECT-TYPE    
  Counter  

rcStatMltEtherIMacTransmitError 1.3.6.1.4.1.2272.1.12.6.2.1.10
A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the LateCollisions object, the ExcessiveCollisions object, or the CarrierSenseError object.
OBJECT-TYPE    
  Counter  

rcStatMltEtherCarrierSenseError 1.3.6.1.4.1.2272.1.12.6.2.1.11
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
OBJECT-TYPE    
  Counter  

rcStatMltEtherFrameTooLong 1.3.6.1.4.1.2272.1.12.6.2.1.12
A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

rcStatMltEtherIMacReceiveError 1.3.6.1.4.1.2272.1.12.6.2.1.13
A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the FrameTooLongs object, the AlignmentErrors object, of the FCSErrors objects. The precise meaning of the count represented by an instance of this object is implementation specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
OBJECT-TYPE    
  Counter  

rcStatMltIpTable 1.3.6.1.4.1.2272.1.12.6.3
A table used to store Mlt Ip statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatMltIpEntry

rcStatMltIpEntry 1.3.6.1.4.1.2272.1.12.6.3.1
Mlt enternet statistics
OBJECT-TYPE    
  RcStatMltIpEntry  

rcStatMltIpMltId 1.3.6.1.4.1.2272.1.12.6.3.1.1
Mlt Id
OBJECT-TYPE    
  INTEGER 1..8  

rcStatMltIpInReceives 1.3.6.1.4.1.2272.1.12.6.3.1.2
all incoming packets
OBJECT-TYPE    
  Counter  

rcStatMltIpInHdrErrors 1.3.6.1.4.1.2272.1.12.6.3.1.3
hdr errors detected
OBJECT-TYPE    
  Counter  

rcStatMltIpInAddrErrors 1.3.6.1.4.1.2272.1.12.6.3.1.4
bad dest. ip addr
OBJECT-TYPE    
  Counter  

rcStatMltIpForwDatagrams 1.3.6.1.4.1.2272.1.12.6.3.1.5
packets forwarded
OBJECT-TYPE    
  Counter  

rcStatMltIpInUnknownProtos 1.3.6.1.4.1.2272.1.12.6.3.1.6
unsupported protocol
OBJECT-TYPE    
  Counter  

rcStatMltIpInDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.7
good, but no buffer
OBJECT-TYPE    
  Counter  

rcStatMltIpInDelivers 1.3.6.1.4.1.2272.1.12.6.3.1.8
pkts delivered to upper
OBJECT-TYPE    
  Counter  

rcStatMltIpOutRequest 1.3.6.1.4.1.2272.1.12.6.3.1.9
pkts received from upper
OBJECT-TYPE    
  Counter  

rcStatMltIpOutDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.10
good, but no buffer
OBJECT-TYPE    
  Counter  

rcStatMltIpOutNoRoutes 1.3.6.1.4.1.2272.1.12.6.3.1.11
no route to destination
OBJECT-TYPE    
  Counter  

rcStatMltIpReasmReqds 1.3.6.1.4.1.2272.1.12.6.3.1.12
fragments to reassem
OBJECT-TYPE    
  Counter  

rcStatMltIpReasmOKs 1.3.6.1.4.1.2272.1.12.6.3.1.13
reassembled successfully
OBJECT-TYPE    
  Counter  

rcStatMltIpReasmFails 1.3.6.1.4.1.2272.1.12.6.3.1.14
reassembly failures
OBJECT-TYPE    
  Counter  

rcStatMltIpFragOKs 1.3.6.1.4.1.2272.1.12.6.3.1.15
fragment successfully
OBJECT-TYPE    
  Counter  

rcStatMltIpFragFails 1.3.6.1.4.1.2272.1.12.6.3.1.16
fragment failure
OBJECT-TYPE    
  Counter  

rcStatMltIpFragCreates 1.3.6.1.4.1.2272.1.12.6.3.1.17
pkts due to fragmenting
OBJECT-TYPE    
  Counter  

rcStatMltIpRoutingDiscards 1.3.6.1.4.1.2272.1.12.6.3.1.18
Route entries removed
OBJECT-TYPE    
  Counter  

rcStatSmltIstDownCnt 1.3.6.1.4.1.2272.1.12.6.4
Counters that counts how the session between the two peering switches has done down since last boot.
OBJECT-TYPE    
  Counter  

rcStatSmltHelloTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.5
Counters that counts the tx hello msg.
OBJECT-TYPE    
  Counter  

rcStatSmltHelloRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.6
Counters that counts the rx hello msg.
OBJECT-TYPE    
  Counter  

rcStatSmltLearnMacAddrTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.7
Counters that counts the tx learn Mac Address msg.
OBJECT-TYPE    
  Counter  

rcStatSmltLearnMacAddrRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.8
Counters that counts the rx learn Mac Address msg.
OBJECT-TYPE    
  Counter  

rcStatSmltMacAddrAgeOutTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.9
Counters that counts the tx Mac Address Aging Out msg.
OBJECT-TYPE    
  Counter  

rcStatSmltMacAddrAgeOutRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.10
Counters that counts the rx Mac Address Aging Out msg.
OBJECT-TYPE    
  Counter  

rcStatSmltMacAddrAgeExpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.11
Counters that counts the tx Mac Address age expired msg.
OBJECT-TYPE    
  Counter  

rcStatSmltMacAddrAgeExpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.12
Counters that counts the rx Mac Address age expired msg.
OBJECT-TYPE    
  Counter  

rcStatSmltStgInfoTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.13
Counters that counts the tx Stg information msg.
OBJECT-TYPE    
  Counter  

rcStatSmltStgInfoRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.14
Counters that counts the rx Stg information msg.
OBJECT-TYPE    
  Counter  

rcStatSmltDelMacAddrTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.15
Counters that counts the tx deleted MAC address msg.
OBJECT-TYPE    
  Counter  

rcStatSmltDelMacAddrRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.16
Counters that counts the rx deleted MAC address msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSmltDownTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.17
Counters that counts the tx Smlt Down msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSmltDownRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.18
Counters that counts the rx Smlt Down msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSmltUpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.19
Counters that counts the tx Smlt Up msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSmltUpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.20
Counters that counts the rx Smlt Up msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSendMacTblTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.21
Counters that counts the tx Send Mac Table msg.
OBJECT-TYPE    
  Counter  

rcStatSmltSendMacTblRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.22
Counters that counts the rx Send Mac Table msg.
OBJECT-TYPE    
  Counter  

rcStatSmltIgmpTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.23
Counters that counts the tx Igmp msg.
OBJECT-TYPE    
  Counter  

rcStatSmltIgmpRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.24
Counters that counts the rx Igmp msg.
OBJECT-TYPE    
  Counter  

rcStatSmltPortDownTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.25
Counters that counts the tx port down msg.
OBJECT-TYPE    
  Counter  

rcStatSmltPortDownRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.26
Counters that counts the rx port down msg.
OBJECT-TYPE    
  Counter  

rcStatSmltReqMacTblTxMsgCnt 1.3.6.1.4.1.2272.1.12.6.27
Counters that counts the tx request Mac table msg.
OBJECT-TYPE    
  Counter  

rcStatSmltReqMacTblRxMsgCnt 1.3.6.1.4.1.2272.1.12.6.28
Counters that counts the rx request Mac table msg.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2Table 1.3.6.1.4.1.2272.1.12.7
A table used to store OSPF interface statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatOspfIfV2Entry

rcStatOspfIfV2Entry 1.3.6.1.4.1.2272.1.12.7.1
Ospf interface statistics
OBJECT-TYPE    
  RcStatOspfIfV2Entry  

rcStatOspfIfV2Index 1.3.6.1.4.1.2272.1.12.7.1.1
An unique value that is used to identify a physical interface.
OBJECT-TYPE    
  InterfaceIndex 0..4094  

rcStatOspfIfV2Addr 1.3.6.1.4.1.2272.1.12.7.1.2
Ip Address
OBJECT-TYPE    
  IpAddress  

rcStatOspfIfV2RxHellos 1.3.6.1.4.1.2272.1.12.7.1.3
Used to indicate the number hello packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2RxDBDescrs 1.3.6.1.4.1.2272.1.12.7.1.4
Used to indicate the number database descriptor packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2RxLSUpdates 1.3.6.1.4.1.2272.1.12.7.1.5
Used to indicate the number Link state update packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2RxLSReqs 1.3.6.1.4.1.2272.1.12.7.1.6
Used to indicate the number Link state request packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2RxLSAcks 1.3.6.1.4.1.2272.1.12.7.1.7
Used to indicate the number Link state acknowlege packets received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2TxHellos 1.3.6.1.4.1.2272.1.12.7.1.8
Used to indicate the number hello packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2TxDBDescrs 1.3.6.1.4.1.2272.1.12.7.1.9
Used to indicate the number database descriptor packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2TxLSUpdates 1.3.6.1.4.1.2272.1.12.7.1.10
Used to indicate the number Link state update packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2TxLSReqs 1.3.6.1.4.1.2272.1.12.7.1.11
Used to indicate the number Link state request packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2TxLSAcks 1.3.6.1.4.1.2272.1.12.7.1.12
Used to indicate the number Link state acknowlege packets transmitted by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2VersionMismatches 1.3.6.1.4.1.2272.1.12.7.1.13
Used to indicate the number version mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2AreaMismatches 1.3.6.1.4.1.2272.1.12.7.1.14
Used to indicate the number area mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2AuthTypeMismatches 1.3.6.1.4.1.2272.1.12.7.1.15
Used to indicate the number AuthType mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2AuthFailures 1.3.6.1.4.1.2272.1.12.7.1.16
Used to indicate the number Authentication failures.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2NetMaskMismatches 1.3.6.1.4.1.2272.1.12.7.1.17
Used to indicate the number net mask mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2HelloIntervalMismatches 1.3.6.1.4.1.2272.1.12.7.1.18
Used to indicate the number hello interval mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2DeadIntervalMismatches 1.3.6.1.4.1.2272.1.12.7.1.19
Used to indicate the number dead interval mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatOspfIfV2OptionMismatches 1.3.6.1.4.1.2272.1.12.7.1.20
Used to indicate the number options mismatches received by this interface.
OBJECT-TYPE    
  Counter  

rcStatPos 1.3.6.1.4.1.2272.1.12.8
OBJECT IDENTIFIER    

rcStatPosControlTable 1.3.6.1.4.1.2272.1.12.8.1
OBJECT-TYPE    
  SEQUENCE OF  
    RcStatPosControlEntry

rcStatPosControlEntry 1.3.6.1.4.1.2272.1.12.8.1.1
OBJECT-TYPE    
  RcStatPosControlEntry  

rcStatPosControlPortIndex 1.3.6.1.4.1.2272.1.12.8.1.1.1
A unique value for each port.
OBJECT-TYPE    
  InterfaceIndex  

rcStatPosControlInErrors 1.3.6.1.4.1.2272.1.12.8.1.1.2
The total number of error pkts received on the interface.
OBJECT-TYPE    
  Counter  

rcStatPosControlInUnknownProtos 1.3.6.1.4.1.2272.1.12.8.1.1.3
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter  

rcStatPosControlOutErrors 1.3.6.1.4.1.2272.1.12.8.1.1.4
The number of outbound packets that could not be transmitted because of errors.
OBJECT-TYPE    
  Counter  

rcStatPosControlHCInOctets 1.3.6.1.4.1.2272.1.12.8.1.1.5
The total number of octets received of the interface, including framing characters.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCInUcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.6
The number of subnetwork-unicast packets received from a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCInMulticastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.7
The number of multicast packets received from a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCInBroadcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.8
The number of broadcast packets received from a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCInDiscards 1.3.6.1.4.1.2272.1.12.8.1.1.9
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCOutOctets 1.3.6.1.4.1.2272.1.12.8.1.1.10
The total number of octets trasmitted out of the interface, including framing characters.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCOutUcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.11
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCOutMulticastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.12
The number of multicast packets delivered to a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCOutBroadcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.13
The number of broadcast packets delivered to a higher-layer protocol.
OBJECT-TYPE    
  Counter64  

rcStatPosControlHCOutDiscards 1.3.6.1.4.1.2272.1.12.8.1.1.14
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.
OBJECT-TYPE    
  Counter64  

rcStatMulticast 1.3.6.1.4.1.2272.1.12.9
OBJECT IDENTIFIER    

rcStatMulticastSourceGroupThresholdExceeded 1.3.6.1.4.1.2272.1.12.9.1
The count of number of times the threshold of available IP Multicast (Source,Group) Records was reached. When this threshold is reached, a new IP Multicast stream ingressing the switch cannot be forwarded.
OBJECT-TYPE    
  Counter  

rcStatMulticastEgressStreamThresholdExceeded 1.3.6.1.4.1.2272.1.12.9.2
The count of number of times the threshold of available IP Multicast Egress Forwarding Records was reached. When this threshold is reached, a new IP Multicast Receiver that needs new Egress Forwarding Record (PepStrem Record) will not be programmed to receive the subscribing multicast stream.
OBJECT-TYPE    
  Counter  

rcStg 1.3.6.1.4.1.2272.1.13
OBJECT IDENTIFIER    

rcStgMaxStgs 1.3.6.1.4.1.2272.1.13.1
The maximum number of spanning tree groups this device can support concurrently.
OBJECT-TYPE    
  INTEGER  

rcStgNumStgs 1.3.6.1.4.1.2272.1.13.2
The number of spanning tree groups that are currently defined.
OBJECT-TYPE    
  INTEGER  

rcStgUnassignedPorts 1.3.6.1.4.1.2272.1.13.3
A bitfield used to identify which ports in the system currently not assigned to any STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
OBJECT-TYPE    
  PortSet  

rcStgTable 1.3.6.1.4.1.2272.1.13.4
A table used to store Spanning Tree Group (STG) information. Each row in the table specifies a different STG in the device.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStgEntry

rcStgEntry 1.3.6.1.4.1.2272.1.13.4.1
STG attributes
OBJECT-TYPE    
  RcStgEntry  

rcStgId 1.3.6.1.4.1.2272.1.13.4.1.1
An identifier used to identify a STG in the device.
OBJECT-TYPE    
  INTEGER 1..25  

rcStgTaggedBpduAddress 1.3.6.1.4.1.2272.1.13.4.1.2
The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-00-00.
OBJECT-TYPE    
  MacAddress  

rcStgTaggedBpduVlanId 1.3.6.1.4.1.2272.1.13.4.1.3
The VLAN ID to be used for tagging BPDUs.
OBJECT-TYPE    
  INTEGER  

rcStgBridgeAddress 1.3.6.1.4.1.2272.1.13.4.1.4
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with rcStgPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
OBJECT-TYPE    
  MacAddress  

rcStgNumPorts 1.3.6.1.4.1.2272.1.13.4.1.5
The number of ports controlled by this bridging entity.
OBJECT-TYPE    
  INTEGER  

rcStgProtocolSpecification 1.3.6.1.4.1.2272.1.13.4.1.6
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

rcStgPriority 1.3.6.1.4.1.2272.1.13.4.1.7
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of rcStgBridgeAddress.
OBJECT-TYPE    
  INTEGER 0..65535  

rcStgTimeSinceTopologyChange 1.3.6.1.4.1.2272.1.13.4.1.8
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
OBJECT-TYPE    
  TimeTicks  

rcStgTopChanges 1.3.6.1.4.1.2272.1.13.4.1.9
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
OBJECT-TYPE    
  Counter  

rcStgDesignatedRoot 1.3.6.1.4.1.2272.1.13.4.1.10
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
OBJECT-TYPE    
  BridgeId  

rcStgRootCost 1.3.6.1.4.1.2272.1.13.4.1.11
The cost of the path to the root as seen from this bridge.
OBJECT-TYPE    
  INTEGER  

rcStgRootPort 1.3.6.1.4.1.2272.1.13.4.1.12
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
OBJECT-TYPE    
  INTEGER  

rcStgMaxAge 1.3.6.1.4.1.2272.1.13.4.1.13
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

rcStgHelloTime 1.3.6.1.4.1.2272.1.13.4.1.14
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

rcStgHoldTime 1.3.6.1.4.1.2272.1.13.4.1.15
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
OBJECT-TYPE    
  INTEGER  

rcStgForwardDelay 1.3.6.1.4.1.2272.1.13.4.1.16
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to rcStgBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
OBJECT-TYPE    
  Timeout  

rcStgBridgeMaxAge 1.3.6.1.4.1.2272.1.13.4.1.17
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 600..4000  

rcStgBridgeHelloTime 1.3.6.1.4.1.2272.1.13.4.1.18
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 100..1000  

rcStgBridgeForwardDelay 1.3.6.1.4.1.2272.1.13.4.1.19
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 400..3000  

rcStgEnableStp 1.3.6.1.4.1.2272.1.13.4.1.20
Indicate whether the spanning tree protocol should be active in this STG.
OBJECT-TYPE    
  TruthValue  

rcStgStpTrapEnable 1.3.6.1.4.1.2272.1.13.4.1.21
Indicate whether traps relating to the spanning tree protocol should be sent for this STG.
OBJECT-TYPE    
  TruthValue  

rcStgPortMembers 1.3.6.1.4.1.2272.1.13.4.1.22
A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
OBJECT-TYPE    
  OCTET STRING SIZE(88)  

rcStgRowStatus 1.3.6.1.4.1.2272.1.13.4.1.23
Row status.
OBJECT-TYPE    
  RowStatus  

rcStgPortStpState 1.3.6.1.4.1.2272.1.13.4.1.24
Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3).
OBJECT-TYPE    
  OCTET STRING SIZE(176)  

rcStgPortTable 1.3.6.1.4.1.2272.1.13.5
A table used to store Spanning Tree Group (STG) port related information. If a port is associated with more than one STGs, the port will have one entry in this table for each STG it assigned to.
OBJECT-TYPE    
  SEQUENCE OF  
    RcStgPortEntry

rcStgPortEntry 1.3.6.1.4.1.2272.1.13.5.1
STG Port attributes
OBJECT-TYPE    
  RcStgPortEntry  

rcStgPort 1.3.6.1.4.1.2272.1.13.5.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
OBJECT-TYPE    
  InterfaceIndex  

rcStgPortStgId 1.3.6.1.4.1.2272.1.13.5.1.2
The STG identifier this port is assigned to.
OBJECT-TYPE    
  INTEGER 1..128  

rcStgPortPriority 1.3.6.1.4.1.2272.1.13.5.1.3
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rcStgPort.
OBJECT-TYPE    
  INTEGER 0..255  

rcStgPortState 1.3.6.1.4.1.2272.1.13.5.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see rcStgPortEnable), this object will have a value of disabled(1).
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

rcStgPortEnableStp 1.3.6.1.4.1.2272.1.13.5.1.5
The enabled/disabled status of the port.
OBJECT-TYPE    
  TruthValue  

rcStgPortFastStart 1.3.6.1.4.1.2272.1.13.5.1.6
When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled.
OBJECT-TYPE    
  TruthValue  

rcStgPortPathCost 1.3.6.1.4.1.2272.1.13.5.1.7
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
OBJECT-TYPE    
  INTEGER 1..65535  

rcStgPortDesignatedRoot 1.3.6.1.4.1.2272.1.13.5.1.8
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId  

rcStgPortDesignatedCost 1.3.6.1.4.1.2272.1.13.5.1.9
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OBJECT-TYPE    
  INTEGER  

rcStgPortDesignatedBridge 1.3.6.1.4.1.2272.1.13.5.1.10
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
OBJECT-TYPE    
  BridgeId  

rcStgPortDesignatedPort 1.3.6.1.4.1.2272.1.13.5.1.11
The Port Identifier of the port on the Designated Bridge for this port's segment.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

rcStgPortForwardTransitions 1.3.6.1.4.1.2272.1.13.5.1.12
The number of times this port has transitioned from the Learning state to the Forwarding state.
OBJECT-TYPE    
  Counter  

rcStgPortInConfigBpdus 1.3.6.1.4.1.2272.1.13.5.1.13
The number of Config BPUDs received by this port.
OBJECT-TYPE    
  Counter  

rcStgPortInTcnBpdus 1.3.6.1.4.1.2272.1.13.5.1.14
The number of Topology Change Notification BPUDs received by this port.
OBJECT-TYPE    
  Counter  

rcStgPortInBadBpdus 1.3.6.1.4.1.2272.1.13.5.1.15
The number of Bad BPUDs received by this port.
OBJECT-TYPE    
  Counter  

rcStgPortOutConfigBpdus 1.3.6.1.4.1.2272.1.13.5.1.16
The number of Config BPUDs transmitted by this port.
OBJECT-TYPE    
  Counter  

rcStgPortOutTcnBpdus 1.3.6.1.4.1.2272.1.13.5.1.17
The number of Topology Change Notification BPUDs transmitted by this port.
OBJECT-TYPE    
  Counter  

rcStgPortRowStatus 1.3.6.1.4.1.2272.1.13.5.1.18
Row status.
OBJECT-TYPE    
  RowStatus  

rcStgPortChangeDetection 1.3.6.1.4.1.2272.1.13.5.1.19
If disabled, topology change notifications are not sent for the port.
OBJECT-TYPE    
  TruthValue  

rcStgNotAllowedPorts 1.3.6.1.4.1.2272.1.13.6
A bitfield used to identify which ports in the system that cannot be assigned to any STG (i.e., which ports are single routable ports). The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
OBJECT-TYPE    
  PortSet  

rcBridge 1.3.6.1.4.1.2272.1.14
OBJECT IDENTIFIER    

rcBridgeFdbTable 1.3.6.1.4.1.2272.1.14.1
This table is an replacement to the standard dot1dTpFdbTable in rfc1493.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeFdbEntry

rcBridgeFdbEntry 1.3.6.1.4.1.2272.1.14.1.1
Information about a specific unicast MAC address for which the bridge has some forwarding information.
OBJECT-TYPE    
  RcBridgeFdbEntry  

rcBridgeFdbStatus 1.3.6.1.4.1.2272.1.14.1.1.1
This object indicates the status of this entry.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

rcBridgeFdbAddress 1.3.6.1.4.1.2272.1.14.1.1.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
OBJECT-TYPE    
  MacAddress  

rcBridgeFdbPort 1.3.6.1.4.1.2272.1.14.1.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of rcBridgeFdbStatus is not learned(3).
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeFdbMonitor 1.3.6.1.4.1.2272.1.14.1.1.4
Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to receive monitor traffic.
OBJECT-TYPE    
  TruthValue  

rcBridgeFdbPriority 1.3.6.1.4.1.2272.1.14.1.1.5
Used to indicate the priority of the incoming frames with this destination Mac Address.
OBJECT-TYPE    
  INTEGER low(0), high(1)  

rcBridgeFdbQosLevel 1.3.6.1.4.1.2272.1.14.1.1.6
Used to indicate the qos level of the incoming frames with this destination Mac Address.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgeFdbSmltRemote 1.3.6.1.4.1.2272.1.14.1.1.7
A MAC address indicate for remote learnt, either local or remote.
OBJECT-TYPE    
  TruthValue  

rcBridgeFdbVlanId 1.3.6.1.4.1.2272.1.14.1.1.8
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeFdbTblSize 1.3.6.1.4.1.2272.1.14.2
Used to indicate the number of entries in the bridge forwarding database table.
OBJECT-TYPE    
  INTEGER  

rcBridgeStaticTable 1.3.6.1.4.1.2272.1.14.3
This table is a proprietary replacement to the standard dot1dStaticTable in rfc1493.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeStaticEntry

rcBridgeStaticEntry 1.3.6.1.4.1.2272.1.14.3.1
A table containing forwarding information about unicast entries configured into the bridge by management. This information is used by the transparent bridging function in determining how to propagate a received frame.
OBJECT-TYPE    
  RcBridgeStaticEntry  

rcBridgeStaticAddress 1.3.6.1.4.1.2272.1.14.3.1.1
The MAC address of this entry.
OBJECT-TYPE    
  MacAddress  

rcBridgeStaticPort 1.3.6.1.4.1.2272.1.14.3.1.2
Port on which the MAC address is found.
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeStaticMonitor 1.3.6.1.4.1.2272.1.14.3.1.3
Used to indicate whether monitoring should be performed on incoming packets that match this entry.
OBJECT-TYPE    
  TruthValue  

rcBridgeStaticPriority 1.3.6.1.4.1.2272.1.14.3.1.4
Used to indicate forwarding priority of incoming packets that match this entry.
OBJECT-TYPE    
  INTEGER low(0), high(1)  

rcBridgeStaticStatus 1.3.6.1.4.1.2272.1.14.3.1.5
This object indicates the status of this entry. The default value is permanent(3).
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

rcBridgeStaticQosLevel 1.3.6.1.4.1.2272.1.14.3.1.6
Used to indicate the qos level.
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgeStaticVlanId 1.3.6.1.4.1.2272.1.14.3.1.7
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeStaticTblSize 1.3.6.1.4.1.2272.1.14.4
Used to indicate the number of entries in the bridge static table.
OBJECT-TYPE    
  INTEGER  

rcBridgeFilterTable 1.3.6.1.4.1.2272.1.14.5
This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeFilterEntry

rcBridgeFilterEntry 1.3.6.1.4.1.2272.1.14.5.1
A table containing filtering information configured into the bridge by management specifying a destination address on a specific port and a set of incoming ports. Frames received from one of the incoming ports and containing the specific destination addresses are not allowed to be forwarded.
OBJECT-TYPE    
  RcBridgeFilterEntry  

rcBridgeFilterAddress 1.3.6.1.4.1.2272.1.14.5.1.1
The MAC address of this entry. This address is used to match the destination address of incoming packets.
OBJECT-TYPE    
  MacAddress  

rcBridgeFilterPort 1.3.6.1.4.1.2272.1.14.5.1.2
Port on which this MAC address is found.
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeFilterNotAllowedFrom 1.3.6.1.4.1.2272.1.14.5.1.3
Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address.
OBJECT-TYPE    
  OCTET STRING SIZE(88)  

rcBridgeFilterStatus 1.3.6.1.4.1.2272.1.14.5.1.4
This object indicates the status of this entry. The default value is permanent(3).
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

rcBridgeFilterVlanId 1.3.6.1.4.1.2272.1.14.5.1.5
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeFilterTblSize 1.3.6.1.4.1.2272.1.14.6
Used to indicate the number of entries in the bridge filter table.
OBJECT-TYPE    
  INTEGER  

rcBridgeUnknownMacDiscardTable 1.3.6.1.4.1.2272.1.14.7
This table is used to configure the 'unknown mac discard' feature. This feature applies to layer 2 and layer 3 packets coming from or going out to a specific physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeUnknownMacDiscardEntry

rcBridgeUnknownMacDiscardEntry 1.3.6.1.4.1.2272.1.14.7.1
A table containing information configuring the 'unknown mac discard' feature.
OBJECT-TYPE    
  RcBridgeUnknownMacDiscardEntry  

rcBridgeUnknownMacDiscardIfIndex 1.3.6.1.4.1.2272.1.14.7.1.1
Port on which this 'unknown mac discard' configuration applied to.
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeUnknownMacDiscardAutoLearnEnable 1.3.6.1.4.1.2272.1.14.7.1.2
This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled.
OBJECT-TYPE    
  TruthValue  

rcBridgeUnknownMacDiscardAutoLearnMode 1.3.6.1.4.1.2272.1.14.7.1.3
This variable is used to control the auot-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number n is dependents on the system's available resource. In continuous mode, MAC address is continuous learned until the resource limit is reached. After that the subsequent MAC will be disallowed until one of the original learned MAC is aged out. The default value is one-shot mode.
OBJECT-TYPE    
  INTEGER oneShot(1), continuous(2)  

rcBridgeUnknownMacDiscardAutoLearnTableMode 1.3.6.1.4.1.2272.1.14.7.1.4
This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learned MAC will be aged out. User needs to lock the auto-learn table before MAC addresses can be save to the NVRAM. The whole auto-learn table will be flushed when the setting change from lock to unlock mode. The default value is unlock mode.
OBJECT-TYPE    
  INTEGER unlock(1), lock(2)  

rcBridgeUnknownMacDiscardLogViolations 1.3.6.1.4.1.2272.1.14.7.1.5
This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will be written to the system log file when a violation event was detected. The default value is enable.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardSendTrap 1.3.6.1.4.1.2272.1.14.7.1.6
This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet will be send to the management station when a violation event was detected. The default value is disable.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardDisablePort 1.3.6.1.4.1.2272.1.14.7.1.7
This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific port will be disabled when the violation event was detected. It needs user manually to bring the port back once it was disabled. The default value is disable.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor 1.3.6.1.4.1.2272.1.14.7.1.8
This variable controls the default monitor setting of an auto-learn MAC address. The value 'monitor' means a copy of packet that send from or to the auto-learned MAC address will be forwarded to the designated monitoring port on the system. The default value is none.
OBJECT-TYPE    
  INTEGER none(1), monitor(2)  

rcBridgeUnknownMacDiscardDefaultAutoLearnPriority 1.3.6.1.4.1.2272.1.14.7.1.9
This variable controls the default priority setting of an auto-learn MAC address. The value 'low' means packets send from the MAC address is forwarded at low priority. The value 'high' means packets send from the MAC address is forwarded at high priority. The default value is low.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeUnknownMacDiscardMacCountMax 1.3.6.1.4.1.2272.1.14.7.1.10
This variable represents the maxium number of MACc that can be added to some port.
OBJECT-TYPE    
  INTEGER 0..2048  

rcBridgeUnknownMacDiscardMacCountCur 1.3.6.1.4.1.2272.1.14.7.1.11
This variable represents the current number of MACs that have been added to some port.
OBJECT-TYPE    
  INTEGER 0..2048  

rcBridgeManualEditTable 1.3.6.1.4.1.2272.1.14.8
This table is used to specify what MAC addresses can be learned on each port.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeManualEditEntry

rcBridgeManualEditEntry 1.3.6.1.4.1.2272.1.14.8.1
A table containing information of MAC addresses that can be learned.
OBJECT-TYPE    
  RcBridgeManualEditEntry  

rcBridgeManualEditAddress 1.3.6.1.4.1.2272.1.14.8.1.1
This variable contains the source MAC address of an entry.
OBJECT-TYPE    
  MacAddress  

rcBridgeManualEditPorts 1.3.6.1.4.1.2272.1.14.8.1.2
This variable contains the allowed ports on which the MAC address of this entry can be learned.
OBJECT-TYPE    
  PortSet  

rcBridgeManualEditMonitor 1.3.6.1.4.1.2272.1.14.8.1.3
This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. The default value is false.
OBJECT-TYPE    
  TruthValue  

rcBridgeManualEditPriority 1.3.6.1.4.1.2272.1.14.8.1.4
This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The default value is low.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeManualEditStatus 1.3.6.1.4.1.2272.1.14.8.1.5
The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is used to delete the MAC address from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), active(3)  

rcBridgeManualEditTblSize 1.3.6.1.4.1.2272.1.14.9
Used to indicate the number of entries in the manual edit table.
OBJECT-TYPE    
  INTEGER  

rcBridgeAutoLearnTable 1.3.6.1.4.1.2272.1.14.10
This table contains information of auto-learned MAC address when the 'unknow MAC discard' table's auto-learn is enabled. User must explicitly lock and save the table into NVRAM in order to have this table has the same configuration cross the system reset.
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeAutoLearnEntry

rcBridgeAutoLearnEntry 1.3.6.1.4.1.2272.1.14.10.1
Entries in this table are created automatically when the user explicitly does a lock operation on the auto-learn-table (i.e., when 'AutoLearnTableMode' is set to lock(2)).
OBJECT-TYPE    
  RcBridgeAutoLearnEntry  

rcBridgeAutoLearnAddress 1.3.6.1.4.1.2272.1.14.10.1.1
This variable contains the source MAC address of the entries.
OBJECT-TYPE    
  MacAddress  

rcBridgeAutoLearnPort 1.3.6.1.4.1.2272.1.14.10.1.2
This variable contains the port where the MAC address was learned.
OBJECT-TYPE    
  PortSet  

rcBridgeAutoLearnMonitor 1.3.6.1.4.1.2272.1.14.10.1.3
This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. This value should be synchronized with the setting of 'unknow MAC discard' table's 'Default AutoLearnMonitor' setting when the MAC address was learned.
OBJECT-TYPE    
  TruthValue  

rcBridgeAutoLearnPriority 1.3.6.1.4.1.2272.1.14.10.1.4
This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The value 'high' means packet frames send from the MAC address is forwarded at high priority. This value should be synchronized with the setting of 'unknow MAC discard' table's 'DefaultAutoLearnPriority' setting when the MAC address was learned.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeAutoLearnAction 1.3.6.1.4.1.2272.1.14.10.1.5
This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC address entry from auto-learn table to manual edit table.
OBJECT-TYPE    
  INTEGER none(0), convertToManualEdit(1)  

rcBridgeAutoLearnTblSize 1.3.6.1.4.1.2272.1.14.11
Used to indicate the number of entries in the auto learn table.
OBJECT-TYPE    
  INTEGER  

rcBridgeStaticMulticastTable 1.3.6.1.4.1.2272.1.14.12
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeStaticMulticastEntry

rcBridgeStaticMulticastEntry 1.3.6.1.4.1.2272.1.14.12.1
OBJECT-TYPE    
  RcBridgeStaticMulticastEntry  

rcBridgeStaticMulticastAddress 1.3.6.1.4.1.2272.1.14.12.1.1
src mac addr.
OBJECT-TYPE    
  MacAddress  

rcBridgeStaticMulticastForwardingPorts 1.3.6.1.4.1.2272.1.14.12.1.2
ports for forward this mac
OBJECT-TYPE    
  PortSet  

rcBridgeStaticMulticastMltIds 1.3.6.1.4.1.2272.1.14.12.1.3
list of mlts this mac will be forwarded on
OBJECT-TYPE    
  IdList  

rcBridgeStaticMulticastRowStatus 1.3.6.1.4.1.2272.1.14.12.1.4
row status
OBJECT-TYPE    
  RowStatus  

rcBridgeStaticMulticastTblSize 1.3.6.1.4.1.2272.1.14.13
Used to indicate the number of entries in the static multicast table.
OBJECT-TYPE    
  INTEGER  

rcRateLimitTable 1.3.6.1.4.1.2272.1.14.14
OBJECT-TYPE    
  SEQUENCE OF  
    RcRateLimitEntry

rcRateLimitEntry 1.3.6.1.4.1.2272.1.14.14.1
OBJECT-TYPE    
  RcRateLimitEntry  

rcRateLimitIfIndex 1.3.6.1.4.1.2272.1.14.14.1.1
Port ifindex.
OBJECT-TYPE    
  InterfaceIndex  

rcRateLimitIfTrafficType 1.3.6.1.4.1.2272.1.14.14.1.2
Type of traffic allowed.
OBJECT-TYPE    
  INTEGER multicast(1), broadcast(2)  

rcRateLimitIfAllowedRate 1.3.6.1.4.1.2272.1.14.14.1.3
Allowed traffic rate. If chassis type is 8100.
OBJECT-TYPE    
  INTEGER 1..25  

rcRateLimitIfEnable 1.3.6.1.4.1.2272.1.14.14.1.4
Turn on/off rate limiting on this interface.
OBJECT-TYPE    
  TruthValue  

rcRateLimitIfAllowedRatePps 1.3.6.1.4.1.2272.1.14.14.1.5
Allowed traffic rate per second. If chassis type is 8600.
OBJECT-TYPE    
  INTEGER  

rcBoot 1.3.6.1.4.1.2272.1.15
OBJECT IDENTIFIER    

rcBootFlashSwVersion 1.3.6.1.4.1.2272.1.15.1
BootFlashSwVersion indicates the software version in the Flash.
OBJECT-TYPE    
  DisplayString  

rcBootPcmciaSwVersion 1.3.6.1.4.1.2272.1.15.2
BootPcmciaSwVersion indicate the software version in the Pcmcia card.
OBJECT-TYPE    
  DisplayString  

rcBootLastBootSource 1.3.6.1.4.1.2272.1.15.3
Indicates the boot source of the last the system boot.
OBJECT-TYPE    
  DisplayString  

rcBootPrimary 1.3.6.1.4.1.2272.1.15.4
BootPrimary is indicator for the primary source to boot the system.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcBootSecondary 1.3.6.1.4.1.2272.1.15.5
BootSecondary indicates the second choice of the boot source.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcBootTertiary 1.3.6.1.4.1.2272.1.15.6
BootTertiary indicates the third choice of boot source.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcDevice 1.3.6.1.4.1.2272.1.16
OBJECT IDENTIFIER    

rcDeviceLastBootSource 1.3.6.1.4.1.2272.1.16.1
Used to indicate the source of the software image the system was last booted with.
OBJECT-TYPE    
  DisplayString  

rcDevicePrimarySource 1.3.6.1.4.1.2272.1.16.2
Used to indicate the primary choice to get a system software image.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcDevicePrimarySourceFileName 1.3.6.1.4.1.2272.1.16.3
Used to indicate a file number, if applicable.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcDeviceSecondarySource 1.3.6.1.4.1.2272.1.16.4
Used to indicate the secondary choice to get a system software image.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcDeviceSecondarySourceFileName 1.3.6.1.4.1.2272.1.16.5
Used to indicate a file name, if applicable.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcDeviceTertiarySource 1.3.6.1.4.1.2272.1.16.6
Used to indicate the tertiary choice to get a system software image.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), net(3), skip(4)  

rcDeviceTertiarySourceFileName 1.3.6.1.4.1.2272.1.16.7
Used to indicate a file name, if applicable.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcDeviceConfigSource 1.3.6.1.4.1.2272.1.16.8
Used to indicate the location to get a system configuration file during system boot.
OBJECT-TYPE    
  INTEGER flash(1), pcmcia(2), nvram(5)  

rcDeviceConfigSourceFileName 1.3.6.1.4.1.2272.1.16.9
Used to indicate a file name, if applicable.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rcDeviceFlashBytesUsed 1.3.6.1.4.1.2272.1.16.10
Used to indicate the number of bytes used in the system's configuration flash device.
OBJECT-TYPE    
  INTEGER  

rcDeviceFlashBytesFree 1.3.6.1.4.1.2272.1.16.11
Used to indicate the number of bytes available in the system's configuration flash device.
OBJECT-TYPE    
  INTEGER  

rcDevicePcmciaBytesUsed 1.3.6.1.4.1.2272.1.16.12
Used to indicate the number of bytes used in the system's PCMCIA device.
OBJECT-TYPE    
  INTEGER  

rcDevicePcmciaBytesFree 1.3.6.1.4.1.2272.1.16.13
Used to indicate the number of bytes available in the system's PCMCIA device.
OBJECT-TYPE    
  INTEGER  

rcDeviceAction 1.3.6.1.4.1.2272.1.16.14
Used to specify a particular action to perform on one of the system's device.
OBJECT-TYPE    
  INTEGER none(1), squeezeFlash(2), squeezePcmcia(3), formatFlash(4), formatPcmcia(5), recoverFlash(6), recoverPcmcia(7)  

rcDeviceResult 1.3.6.1.4.1.2272.1.16.15
Used to indicate the result of the last action performed on one of the system's device.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4)  

rcDeviceFlashNumFiles 1.3.6.1.4.1.2272.1.16.16
Used to indicate the number of files available in the system's configuration flash device.
OBJECT-TYPE    
  INTEGER 0..128  

rcDevicePcmciaNumFiles 1.3.6.1.4.1.2272.1.16.17
Used to indicate the number of files available in the system's PCMCIA device.
OBJECT-TYPE    
  INTEGER 0..128  

rcDeviceFlashTable 1.3.6.1.4.1.2272.1.16.25
Flash table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcDeviceFlashEntry

rcDeviceFlashEntry 1.3.6.1.4.1.2272.1.16.25.1
An entry in the system's flash table.
OBJECT-TYPE    
  RcDeviceFlashEntry  

rcDeviceFlashFileNum 1.3.6.1.4.1.2272.1.16.25.1.1
Used to indicate a particular file in flash.
OBJECT-TYPE    
  INTEGER 0..128  

rcDeviceFlashFileName 1.3.6.1.4.1.2272.1.16.25.1.2
Used to indicate a flash file's name.
OBJECT-TYPE    
  DisplayString  

rcDeviceFlashFileVersion 1.3.6.1.4.1.2272.1.16.25.1.3
Used to indicate the flash file's version.
OBJECT-TYPE    
  DisplayString  

rcDeviceFlashFileType 1.3.6.1.4.1.2272.1.16.25.1.4
Used to indicate the flash file's type.
OBJECT-TYPE    
  INTEGER config(1), log(2), trace(3), executable(4)  

rcDeviceFlashFileMode 1.3.6.1.4.1.2272.1.16.25.1.5
Used to indicate the flash file's mode.
OBJECT-TYPE    
  INTEGER compressed(1), uncompressed(2)  

rcDeviceFlashFileSize 1.3.6.1.4.1.2272.1.16.25.1.6
Used to indicate the flash file's size.
OBJECT-TYPE    
  INTEGER  

rcDeviceFlashFileCrc 1.3.6.1.4.1.2272.1.16.25.1.7
Used to indicate the flash file's CRC.
OBJECT-TYPE    
  INTEGER  

rcDeviceFlashFileStatus 1.3.6.1.4.1.2272.1.16.25.1.8
Used to indicate the flash file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'.
OBJECT-TYPE    
  INTEGER active(1), deleted(2)  

rcDeviceFlashRowStatus 1.3.6.1.4.1.2272.1.16.25.1.9
Row status.
OBJECT-TYPE    
  RowStatus  

rcDevicePcmciaTable 1.3.6.1.4.1.2272.1.16.26
PCMCIA table.
OBJECT-TYPE    
  SEQUENCE OF  
    RcDevicePcmciaEntry

rcDevicePcmciaEntry 1.3.6.1.4.1.2272.1.16.26.1
An entry in the system's PCMCIA table.
OBJECT-TYPE    
  RcDevicePcmciaEntry  

rcDevicePcmciaFileNum 1.3.6.1.4.1.2272.1.16.26.1.1
Used to indicate a particular file in PCMCIA.
OBJECT-TYPE    
  INTEGER 0..128  

rcDevicePcmciaFileName 1.3.6.1.4.1.2272.1.16.26.1.2
Used to indicate the PCMCIA file's name.
OBJECT-TYPE    
  DisplayString  

rcDevicePcmciaFileVersion 1.3.6.1.4.1.2272.1.16.26.1.3
Used to indicate the PCMCIA file's version.
OBJECT-TYPE    
  DisplayString  

rcDevicePcmciaFileType 1.3.6.1.4.1.2272.1.16.26.1.4
Used to indicate the PCMCIA file's type.
OBJECT-TYPE    
  INTEGER config(1), log(2), trace(3), executable(4)  

rcDevicePcmciaFileMode 1.3.6.1.4.1.2272.1.16.26.1.5
Used to indicate a particular file in mode.
OBJECT-TYPE    
  INTEGER compressed(1), uncompressed(2)  

rcDevicePcmciaFileSize 1.3.6.1.4.1.2272.1.16.26.1.6
Used to indicate the PCMCIA file's size.
OBJECT-TYPE    
  INTEGER  

rcDevicePcmciaFileCrc 1.3.6.1.4.1.2272.1.16.26.1.7
Used to indicate the PCMCIA file's CRC.
OBJECT-TYPE    
  INTEGER  

rcDevicePcmciaFileStatus 1.3.6.1.4.1.2272.1.16.26.1.8
Used to indicate the PCMCIA file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'.
OBJECT-TYPE    
  INTEGER active(1), deleted(2)  

rcDevicePcmciaRowStatus 1.3.6.1.4.1.2272.1.16.26.1.9
Row status.
OBJECT-TYPE    
  RowStatus  

rcMlt 1.3.6.1.4.1.2272.1.17
OBJECT IDENTIFIER    

rcMltNumMlts 1.3.6.1.4.1.2272.1.17.1
The number of MLTs currently defined in the switch.
OBJECT-TYPE    
  INTEGER  

rcMltPotentialMembers 1.3.6.1.4.1.2272.1.17.2
The set of ports that are not members of any MLT.
OBJECT-TYPE    
  PortSet  

rcMltIstSessionEnable 1.3.6.1.4.1.2272.1.17.3
Used to enable/disable mlt functionality.
OBJECT-TYPE    
  EnableValue  

rcMltIstSessionStatus 1.3.6.1.4.1.2272.1.17.4
Used to enable/disable mlt functionality.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

rcMltIstPeerIp 1.3.6.1.4.1.2272.1.17.5
IST mlt Peer Ip address.
OBJECT-TYPE    
  IpAddress  

rcMltIstVlanId 1.3.6.1.4.1.2272.1.17.6
IST mlt Vlan Id.
OBJECT-TYPE    
  INTEGER 1..4095  

rcMltTable 1.3.6.1.4.1.2272.1.17.10
A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts.
OBJECT-TYPE    
  SEQUENCE OF  
    RcMltEntry

rcMltEntry 1.3.6.1.4.1.2272.1.17.10.1
Entry containing configuration information for a particular Multi-Link Trunk.
OBJECT-TYPE    
  RcMltEntry  

rcMltId 1.3.6.1.4.1.2272.1.17.10.1.1
A value that uniquely identifies the Multi-Link Trunk associated with this entry.
OBJECT-TYPE    
  INTEGER 1..32  

rcMltName 1.3.6.1.4.1.2272.1.17.10.1.2
An administratively-assigned name for this MLT.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcMltPortMembers 1.3.6.1.4.1.2272.1.17.10.1.3
The set of ports that are members of this MLT.
OBJECT-TYPE    
  PortSet  

rcMltPortType 1.3.6.1.4.1.2272.1.17.10.1.4
The type of MLT port: access(1) or trunk(2).
OBJECT-TYPE    
  INTEGER access(1), trunk(2)  

rcMltNumVlanIds 1.3.6.1.4.1.2272.1.17.10.1.5
Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable.
OBJECT-TYPE    
  INTEGER  

rcMltVlanIds 1.3.6.1.4.1.2272.1.17.10.1.6
An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID.
OBJECT-TYPE    
  IdList SIZE(4096)  

rcMltRowStatus 1.3.6.1.4.1.2272.1.17.10.1.7
Used to create/delete entries in the rcMltTable.
OBJECT-TYPE    
  RowStatus  

rcMltEnable 1.3.6.1.4.1.2272.1.17.10.1.8
Enable the entry.
OBJECT-TYPE    
  TruthValue  

rcMltLoadBalance 1.3.6.1.4.1.2272.1.17.10.1.9
Perform load balance?
OBJECT-TYPE    
  TruthValue  

rcMltDistributionAlgorithm 1.3.6.1.4.1.2272.1.17.10.1.10
none(1), ... It will be fill later
OBJECT-TYPE    
  INTEGER none(1)  

rcMltIfIndex 1.3.6.1.4.1.2272.1.17.10.1.11
Used to indicate the 'logical' ifIndex assigned to this MLT.
OBJECT-TYPE    
  InterfaceIndex  

rcMltMltType 1.3.6.1.4.1.2272.1.17.10.1.12
MLT type.
OBJECT-TYPE    
  INTEGER normalMLT(1), istMLT(2), splitMLT(3)  

rcMltSmltId 1.3.6.1.4.1.2272.1.17.10.1.13
Split MLT id.
OBJECT-TYPE    
  INTEGER 1..32  

rcMltRunningType 1.3.6.1.4.1.2272.1.17.10.1.14
Split MLT running type.
OBJECT-TYPE    
  INTEGER normalMLT(1), istMLT(2), splitMLT(3)  

rcWeb 1.3.6.1.4.1.2272.1.18
OBJECT IDENTIFIER    

rcWebEnableServer 1.3.6.1.4.1.2272.1.18.1
Control whether the web server should be enabled. Setting this variable to true will make the server operational. Setting this variable to false will disable server.
OBJECT-TYPE    
  TruthValue  

rcWebRWAUserName 1.3.6.1.4.1.2272.1.18.2
User name for the read-write-all web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWAPassword 1.3.6.1.4.1.2272.1.18.3
Password for the read-write-all web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWUserName 1.3.6.1.4.1.2272.1.18.4
User name for the read-write web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWPassword 1.3.6.1.4.1.2272.1.18.5
Password for the read-write web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebROUserName 1.3.6.1.4.1.2272.1.18.6
User name for the read-only web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebROPassword 1.3.6.1.4.1.2272.1.18.7
Password for the read-only web-server account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebLastChange 1.3.6.1.4.1.2272.1.18.8
Last web-browser initiated configuration change since sysUpTime.
OBJECT-TYPE    
  TimeTicks  

rcWebNumHits 1.3.6.1.4.1.2272.1.18.9
Number of hits to the web-server
OBJECT-TYPE    
  INTEGER  

rcWebNumAccessChecks 1.3.6.1.4.1.2272.1.18.10
Number of access checks performed by the web-server
OBJECT-TYPE    
  INTEGER  

rcWebNumAccessBlocks 1.3.6.1.4.1.2272.1.18.11
Number of accesses blocked by the web-server
OBJECT-TYPE    
  INTEGER  

rcWebNumRxErrors 1.3.6.1.4.1.2272.1.18.12
Number of receive errors encountered by the web-server
OBJECT-TYPE    
  INTEGER  

rcWebNumTxErrors 1.3.6.1.4.1.2272.1.18.13
Number of transmit errors encountered by the web-server
OBJECT-TYPE    
  INTEGER  

rcWebNumSetRequest 1.3.6.1.4.1.2272.1.18.14
Number of set-request to the web-server
OBJECT-TYPE    
  INTEGER  

rcWebPrimaryHtmlSourceDir 1.3.6.1.4.1.2272.1.18.15
primary html source directory
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcWebSecondaryHtmlSourceDir 1.3.6.1.4.1.2272.1.18.16
secondary html source directory
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcWebTertiaryHtmlSourceDir 1.3.6.1.4.1.2272.1.18.17
tertiary html source directory
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcWebRWL3UserName 1.3.6.1.4.1.2272.1.18.18
user name for the L3 web server account
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWL3Password 1.3.6.1.4.1.2272.1.18.19
password for the L3 web server account
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWL2UserName 1.3.6.1.4.1.2272.1.18.20
user name for the L2 web server account
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebRWL2Password 1.3.6.1.4.1.2272.1.18.21
password for the L2 web server account
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcWebDefaultDisplayRows 1.3.6.1.4.1.2272.1.18.22
default display rows in html page.
OBJECT-TYPE    
  INTEGER 10..100  

rcWebLastHostAccessBlocked 1.3.6.1.4.1.2272.1.18.23
last host access blocked
OBJECT-TYPE    
  IpAddress  

rcWebHelpTftpSourceDir 1.3.6.1.4.1.2272.1.18.24
tftp source directory for help files
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rcWebHttpPort 1.3.6.1.4.1.2272.1.18.25
the HTTP port for web access
OBJECT-TYPE    
  INTEGER 1..49151  

rcCli 1.3.6.1.4.1.2272.1.19
OBJECT IDENTIFIER    

rcCliRWAUserName 1.3.6.1.4.1.2272.1.19.1
User name for the read-write-all CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliRWAPassword 1.3.6.1.4.1.2272.1.19.2
Password for the read-write-all CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliRWUserName 1.3.6.1.4.1.2272.1.19.3
User name for the read-write CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliRWPassword 1.3.6.1.4.1.2272.1.19.4
Password for the read-write CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliRWL3UserName 1.3.6.1.4.1.2272.1.19.5
User name for the read-write layer-3 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliRWL3Password 1.3.6.1.4.1.2272.1.19.6
Password for the read-write layer-3 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliRWL2UserName 1.3.6.1.4.1.2272.1.19.7
User name for the read-write layer-2 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliRWL2Password 1.3.6.1.4.1.2272.1.19.8
Password for the read-write layer-2 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliROUserName 1.3.6.1.4.1.2272.1.19.9
User name for the read-only CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliROPassword 1.3.6.1.4.1.2272.1.19.10
Password for the read-only CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliMaxTelnetSessions 1.3.6.1.4.1.2272.1.19.11
Used to indicate the maximum number of telnet sessions the system will support.
OBJECT-TYPE    
  INTEGER 0..8  

rcCliMaxRloginSessions 1.3.6.1.4.1.2272.1.19.12
Used to indicate the maximum number of rlogin sessions the system will support.
OBJECT-TYPE    
  INTEGER 0..8  

rcCliTimeout 1.3.6.1.4.1.2272.1.19.13
Used to indicate the amount of idle time, in seconds to wait before timing out telnet and rlogin sessions.
OBJECT-TYPE    
  INTEGER 30..65535  

rcCliNumAccessViolations 1.3.6.1.4.1.2272.1.19.14
Used to indicate the number of CLI access violations detected by the system.
OBJECT-TYPE    
  INTEGER  

rcCliRWL1UserName 1.3.6.1.4.1.2272.1.19.15
User name for the read-write layer-1 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rcCliRWL1Password 1.3.6.1.4.1.2272.1.19.16
Password for the read-write layer-1 CLI account.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcCliPasswordChange 1.3.6.1.4.1.2272.1.19.17
Used to indication which password is changed when sending a rcCliPasswordChange trap.
OBJECT-TYPE    
  INTEGER ro(1), l1(2), l2(3), l3(4), rw(5), rwa(6)  

rcCliPassChangeResult 1.3.6.1.4.1.2272.1.19.18
Used to indication the result of changing password when sending a rcPasswordChange trap.
OBJECT-TYPE    
  INTEGER success(1), fail(2)  

rcError 1.3.6.1.4.1.2272.1.20
OBJECT IDENTIFIER    

rcErrorLevel 1.3.6.1.4.1.2272.1.20.1
Error level indicator for the last error reported in the system. The meaning of this value are : 0 = Informative Information 1 = Warning Condition 2 = Error Condition 3 = Manufacturing Information 4 = Fatal Condition
OBJECT-TYPE    
  INTEGER  

rcErrorCode 1.3.6.1.4.1.2272.1.20.2
Error code indicator for the last error reported in the system. This is an encoded value that identifies the software module that generated the error message as well as a specific error condition within that module. This value is transparent to the user. This value is intended to help Accelar support and development staff to isolate system problems.
OBJECT-TYPE    
  INTEGER  

rcErrorText 1.3.6.1.4.1.2272.1.20.3
Error string of the last error reported in the system.
OBJECT-TYPE    
  DisplayString  

rcErrorReturnCode 1.3.6.1.4.1.2272.1.20.4
This variable is used primarily as an enumeration to list the proprietary return codes that this device can send to a management station in response to a failed SNMP operation.
OBJECT-TYPE    
  INTEGER none(100), resourceNotAvailable(101), operationNotAllowed(102), operationInProgress(103), invalidPortNumber(104), invalidSubnetAddress(105), invalidSubnetMask(106), invalidVlanId(107), invalidVlanName(108), invalidVlanType(109), invalidStgId(110), invalidProtocolId(111), invalidPortMembers(112), invalidStaticMembers(113), invalidNotAllowedMembers(114), destinationNotReachable(115), tableIsFull(116), nondualConnectorGigPort(117), testIdNotPresent(118), invalidTestId(119), invalidStatusChange(120), invalidCpuCard(121), invalidSrcPortChoice(122), dstPortUnspecified(123), srcPortOneUnspecified(124), srcPortTwoUnspecified(125), notSupported(126), userNameIsNonUnique(127), invalidName(128), unknownErrorCode1(129), cannotModifyThisField(130), invalidUserPasswordLength(131), thisUsernameExists(132), invalidIpAddress(133), invalidMacAddress(134), nosuchEntry(135), anotherLoopBackTestAlreadyRunning(136), protocolIdNotRoutable(137), autoNegotiateIsOn(138), noActionSpecified(139), invalidActionSpecified(140), cannotModifyAutoNegotiateIsOn(141), cannotModifyAutoPortIsFiber(142), autoNegotiationNotSupported(143), cannotSetAdminSpeed(144), cannotSetAdminDuplex(145), ospfRtrDeadIntIsnotMultOfHelloInt(146), ospfRtrDeadIntLessThan4TimesHelloInt(147), notUsed1(148), ospfBadAuthValue(149), ospfEnabled(150), ospfAreaNotFound(151), ospfBackboneArea(152), notInTestMode(153), ospfInvalidAreaRangeMask(154), ospfDuplicateEntry(155), ospfRangeNotAllocated(156), ospfAreaRangeNotFound(157), testRunning(158), nvramLimitExceeded(159), flowAlreadyExist(160), flowNotFound(161), invalidOspfAreaRangeNet(162), duplicateIpAddress(163), conflictingIpAddress(164), invalidRouteCost(165), invalidNextHop(166), duplicateRoute(167), cannotFindRoute(168), cannotDeleteLocalRoute(169), badDhcpMinSec(170), badDhcpMaxHop(171), badDhcpMode(172), badAgentAddress(173), dhcpNotEnabled(174), dhcpForwardNotFound(175), dhcpDuplicateForward(176), dhcpMaxForward(177), dhcpBadEnable(178), invalidDeviceFileNumber(179), notExecutableDeviceFile(180), deletedDeviceFile(181), pcmciaNotPresent(182), pcmciaWriteProtected(183), discontiguousSubnetMask(184), invalidOspfMetric(185), ospfHostRouteNotFound(186), invalidMltId(187), invalidMltName(188), onlyOnePortInMlt(189), moreThan4PortsInMlt(190), portsInDifferentQuid(191), portAlreadyInAnotherMlt(192), invalidVlan(193), nonExistIpMcastAddriess(194), invalidIpMulticastAddress(195), portIsLocked(196), accessRestriction(197), invalidDeviceFileLength(198), duplicateAccessPolicyId(199), noDesiredAccessPolicyItem(200), ipfFilterNonExist(201), ipfInvalidVlanPriority(202), ipfInvalidDestinationAddress(203), ipfInvalidSourceAddress(204), ipfFilterDuplicate(205), ipfGlobalListDuplicate(206), ipfGlobalListNonExist(207), ipfBaseListDuplicate(208), ipfBaseListNonExist(209), ipfPortDuplicate(210), ipfPortNonExist(211), ipfListNonExist(212), snmpSnoopDisabled(213), invalidHostIpAddress(214), snoopStaticGroupExist(215), ripAnnouncePolicyNotFound(216), duplicateRipAnnouncePolicy(217), ospfAnnouncePolicyNotFound(218), duplicateOspfAnnouncePolicy(219), policyMatchNetEntryNotFound(220), duplicatePolicyNetEntry(221), policyAddrListEntryNotFound(222), duplicatePolicyAddrListEntry(223), policyAddrListIdNotFound(224), policyExactNetListNotFound(225), policyRangeNetListNotFound(226), policyRipGatewayListNotFound(227), policyRipInterfaceListNotFound(228), policyOspfRtrIdListNotFound(229), policyAnnounceInterfaceListNotFound(230), policyAdvertiseNetListNotFound(231), policyInjectNetListNotFound(232), invalidPolicyListIdListSize(233), policyAddrEntryNotFound(234), duplicatePolicyAddrEntry(235), disableThisPortFirst(236), mutinettingNotSupported(237), addingGlobalFilterToNonGlobalList(238), addingNonGlobalFilterToGlobalList(239), setFilteredPortMode(240), setFilteredPortEnableValue(241), invalidModeType(242), duplicateRipAcceptPolicy(243), ripAccepPolicyNotFound(244), duplicateOspfAcceptPolicy(245), ospfAccepPolicyNotFound(246), invalidAccessPolicyName(247), invalidAccessPolicyPolicyEnable(248), invalidAccessPolicyMode(249), invalidAccessPolicyService(250), invalidAccessPolicyPrecedence(251), invalidAccessPolicyNetAddress(252), invalidAccessPolicyTrustedHostAddress(253), invalidAccessPolicyTrustedHostUserName(254), invalidAccessPolicyAccessLevel(255), invalidAccessPolicyLogSetting(256), invalidAccessPolicyPolicyId(257), invalidAreaOptions(258), cannotDeleteAreaIfCountIsNotZero(259), ospfInterfaceNotFound(260), ospfIfAreaIdConflictsWithConfiguredAreaRange(261), applyingDuplicateGlobalFilterToPort(262), differentMltPortTypes(263), addPortToMltFailed(264), removePortFromMltFailed(265), mirrorPortInMlt(266), invalidDhcpAlwaysBroadcast(267), interfaceIsSetToTransmitRipV1(268), ripInterfaceDoesnotExist(269), interfaceIsNotRunningRip(270), cannotCreateVirtLinksThroughStubArea(271), invalidSyslogEnableSetting(272), invalidSyslogMaxHostsSettings(273), invalidSyslogHostIpAddr(274), invalidSyslogHostUdpPort(275), invalidSyslogHostFacility(276), invalidSyslogModuleId(277), invalidSyslogSeverity(278), invalidSyslogMapInfoSeverity(279), invalidSyslogMapWarningSeverity(280), invalidSyslogMapErrorSeverity(281), invalidSyslogMapMfgSeverity(282), invalidSyslogMapFatalSeverity(283), invalidSyslogMapTraceMsgSetting(284), invalidSyslogMapTrapMsgSetting(285), invalidSyslogLogTraceMsgSetting(286), invalidSyslogLogTrapMsgSetting(287), invalidSyslogEntryEnableSetting(288), invalidSyslogMaxHostSetting(289), invalidSyslogHostId(290), duplicateSyslogEntry(291), syslogHostTableIsFull(292), noDesiredSyslogHostEntryFound(293), invalidHoldDownTime(294), incompatibleAruHardware(295), invalidVrid(296), duplicateVrrpEntry(297), noVrrpIpAddressSpecified(298), invalidVrrpControlValue(299), invalidVrrpPriority(300), invalidVrrpAdvertisementInterval(301), maxNumOfVrrpsEntriesExceeded(302), policyNetListEntryNotFound(303), duplicatePolicyNetListEntry(304), policyNetListIdNotFound(305), filterOnAnEnabledPort(306), listOnAnEnabledPort(307), invalidIpFilterSrcOption(308), invalidIpFilterDstOption(309), invalidOspfAreaImportextOption(310), invalidOspfInterfaceMd5KeyIdLength(311), invalidOspfInterfaceMd5KeyLength(312), invalidIPXNetworkNumber(313), ipxCircuitAlreadyExists(314), ipxCircuitDoesNotExist(315), encapsulationIsNotAllowedOnSameSegment(316), encapsulationDoesNotMatchProtocolBasedVLAN(317), invalidDvmrpIfTblEnableValue(318), invalidDvmrpIfTblMetricValue(319), ipHostPartForSubnetAddrIsNonZero(320), globalMulticastNotEnabled(321), metricFieldIsCreatedButModified(322), invalidIpMRouteInterfaceTblTtlValue(323), invalidUdpPortNumber(324), invalidUdpProtocolNameLength(325), cannotModifyUdpProtocolName(326), udpProtocolEntryDoesnotexists(327), duplicateUdpProtocolEntry(328), cannotDelUdpProtocolEntryFwdEntriesExists(329), udpBroadcastIntfEntryDoesnotExists(330), duplicateUdpBroadcastIntfEntry(331), invalidUdpConfBroacastInterface(332), updConfIntfEntryNotEnabledForUdpBcastForwarding(333), udpPortFwdEntryDoesnotExists(334), duplicateUdpPortFwdEntryDoesnotExists(335), udpPortFwdEntryUdpPortInterfaceDoesnotExists(336), udpPortFwdListEntryDoesnotExists(337), duplicateUdpPortFwdListEntryDoesnotExists(338), udpPortFwdListEntryPortFwdIdDoesnotExists(339), udpPortFwdListEntryinvalidFwdIdListSize(340), cannotDeleteUdpPortFwdListEntryInterfaceUsingThisList(341), invalidIgmpSnoopDestAddress(342), invalidIgmpSnoopHostAddress(343), cannotDeleteDefaultUdpProtocolTblEntry(344), nextHopRouteIsStaticRoute(345), invalidUpdateIntervalValueInDVMRPGlobalTable(346), invalidTriggeredUpdateIntervalValueInDVMRPGlobalTable(347), invalidLeafTimeoutValueInDVMRPGlobalTable(348), invalidNbrTimeoutValueInDVMRPGlobalTable(349), invalidNbrProbeIntervalValueInDVMRPGlobalTable(350), invalidQueryIntervalValueInIgmpInterfaceTable(351), invalidVersionValueInIgmpInterfaceTable(352), invalidQueryMaxResponseTimeValueInIgmpInterfaceTable(353), invalidRobustnessValueInIgmpInterfaceTable(354), invalidLastMembQueryIntvlValueInIgmpInterfaceTable(355), invalidANDMaskInRcIpTosRuleGroup(356), invalidORRule1InRcIpTosRuleGroup(357), invalidORRule2InRcIpTosRuleGroup(358), invalidORRule3InRcIpTosRuleGroup(359), deleteStaticPortNotValid(360), maxEntriesForIgmpAccTbl(361), maxMaskNumberOfHostIgmpAccTbl(362), dvmrpIgmpExclusive(363), theSpecifiedAreaRangeMaskIsInvalid(364), invalidLengthOf2kBootConfigImageSource(365), invalidLengthOf2kBootConfigSource(366), preferenceOfStaticRouteIsInvalid(367), copyFileOutOfSpace(368), copyFileFileNotFound(369), copyFileInvalidDestination(370), copyFileInvalidSource(371), copyFileFail(372), invalidLinkFlapDetectAutoPortDown(373), invalidLinkFlapDetectFrequency(374), invalidLinkFlapDetectInterval(375), invalidLinkFlapDetectSendTrap(376), invalidQosLevel(377), invalidQosWeight(378), invalidQosThreshold(379), invalidTagToQosTableIeee1pValue(380), invalidTagToQosTableQosLevel(381), invalidDsFieldToQosTableDsField(382), invalidDsFieldToQosTableQosLevel(383), invalidQosToTagTableQosLevel(384), invalidQosToTagTableIeee1pValue(385), invalidQosLevelValue(386), invalidQosToDsFieldTableDsFieldValue(387), invalidQosToDsFieldTableQosLevel(388), invalidDiffServEnable(389), invalidDiffServType(390), invalidIeeeOverride(391), invalidVlanQosValue(392), invalidVlanTosValue(393), operationNotAllowedOnAccessPort(394), operationNotAllowedOnTaggingPort(395), invalidFileName(396), invalidDiaglogueDuplicateMirroredPort(397), invalidDiaglogueEnableValue(398), invalidDiaglogueEnableSetting(399), invalidDiaglogueModeSetting(400), invalidDiaglogueEntryId(401), srcMacVlanIsNotYetEnabled(402), srcMacVlanIsNotYetDisabled(403), invalidDiaglogueOperation(404), invalidMacAddressSpecied(405), maxResponseTimeGreaterThanQueryInterval(406), noModifyDsFltrAllowedOnDiffSrvCorePort(407), mltMoreThan4PortsInMgMlt(408), protocolRulesForThePortHasExceeded16(409), routeDoesNotExistsInTheRroutingTable(410), diagMirrorByPortTableAccessError(411), diagMirrorByPortInvalidMirroringPortSetting(412), igmpAdminVersionConfiguredLessThanOperatingVersion(413), canOnlyConfigureViaMltTable(414), dvmrpInterfaceTableIsFull(415), invalidDscpField(416), invalidDscpReservedField(417), disablePortPriorToChangingDiffServPortType(418), ipFilterInvalidId(419), rateLimitingExceeded(420), diagEntryMaxExceeded(421), onlyOneMirroringPortAllow(422), radiusServerExist(423), radiusServerNotExist(424), radiusServerInUse(425), radiusMaxServerNumExceeded(426), radiusInvalidAttribute(427), canNotChangeLocking(428), activationDisabled(429), zeroMac(430), atmBadVpi(431), atmBadVci(432), atmBadFramingMode(433), atmDestroyPvcFailed(434), atmBadName(435), atmBadEnable(436), atmBadpvcEncapsulation(437), atmBadPvdServiceType(438), atmBadPeakCellRate(439), atmBadSustainedCellRate(440), atmBadMaxBurstSize(441), atmBadMaxMtuSize(442), atmBadElanId(443), atmUnknownOperation(444), atmDestroy1483ElanFailed(445), atmBadPerformTagging(446), atmIlleagalElanDefinition(447), atmCreate1483ElanFailed(448), atmBadSnmpMessage(449), atmBadScrambleEnable(450), atmBadSignalingEnable(451), atmBadClockSource(452), atmBadLoopback(453), badRowStatus(454), atmBadLaneConfigMode(455), atmLecCreationFailed(456), atmBad1438Inarp(457), atmF5StartFailed(458), atmBadPvcId(459), atmBadConnectType(460), atmBadIpxEncapMethod(461), atmBadUniVersion(462), atmCreatePvcFailed(463), invalidLoginPromptLength(464), invalidPasswordPromptLength(465), invalidCliBannerLength(466), invalidCliBannerSize(467), invalidCliMotdLength(468), invalidCliMotdSize(469), invalidPortNameLength(470), invalidPortName(471), invalidMaxAdvertiseInterval(472), invalidMinAdvertiseInterval(473), invalidMaxInitialAdvertiseInterval(474), invalidMaxInitalAdvertments(475), invalidNeigborDeadInterval(476), invalidUserSetTimeYearValue(477), invalidUserSetTimeMonthValue(478), invalidUserSetTimeDateValue(479), invalidUserSetTimeHourValue(480), invalidUserSetTimeMinuteValue(481), invalidUserSetTimeSecondValue(482), rtcIsNotPresent(483), rtcIsNotRunning(484), maxMacCount(485), maxAdvertiseIntLessThanMinAdvertiseInt(486), minAdvertiseIntGreaterThanMaxAdvertiseInt(487), dvmrpNotEnabledGlobally(488), vrrpCriticalIpAddrNotEnable(489), vrrpInvalidCriticalIpAddr(490), metricConfigNotAllowed(491), posActiveNonBcpEnabledPort(492), posVlanNoMorePorts(493), posPortCanBeAdded(494), posNonBcpCanNotBeEnabled(495), posImageFilenameTooLong(496), posNoIpcpEnableOnMltPorts(497), posNoIpcpEnableOnTagPort(498), posNoIpxcpEnableOnMltPort(499), posNoIpxcpEnableOnTagPort(500), posDisableTagBeforeBcpDisable(501), posAssignIpBeforeIpcpEnable(502), posAssignIpxBeforeIpxcpEnable(503), posAssignIpBeforeRemoteIp(504), posKeepRemoteIpInSameSubnet(505), staticRouteEnabled(506), cannotChangeAutoLearnState(507), invalidVirtualIpAddr(508), virtualAndPhysicalIpNotInSameSubnet(509), vidNotAvailable(510), mgidNotAvailable(511), posNoIpcpEnableOnPolicyVlanPort(512), posNoIpxcpEnableOnPolicyVlanPort(513), posVrrpNotAllowed(514), webInvalidHttpPort(515), cannotAddMulticastStaticMac(516), posNoStpEnableWithBCPClosed(517), posAtmNoRip1(518), ipfFilterNumOverFilterSetLimit(519), ipfQosTrafficAverageRateOverLimit(520), ipfQosTrafficProfileNotExist(521), atmNoIpIpxConfigOnVlan(522), atmPvcIsInUse(523), globalFilterNotDisabled(524), dhcpNotOnByIpSubnetVlan(525), cannotConfigureDefaultGateway(526), routeExists(527), gatewayNotOnMgmtInterfaceSubnet(528), mgmtRouteTableFull(529), routeNotExists(530), invalidMacOffsetRangeForBW(531), invalidMacOffsetRangeForMG(532), atmPvcBadPeakCellRate(533), atmPvcBadSustainedCellRate(534), qosReservedQosLevel(535), dvmrpGlobInvalidFwdCacheTimeOut(536), dvmrpGlobInvalidRouteExpireTimeOut(537), dvmrpGlobInvalidRouteDiscardTimeOut(538), dvmrpGlobInvalidRouteSwitchTimeOut(539), pimCondRPGroupExists(540), pimCandRPAddressInvalid(541), pimGroupAddressInvalid(542), pimNotEnabled(543), pimInvalidJPInterval(544), pimInvalidMode(545), pimInvalidHelloInt(546), pimInvalidCBSRPRef(547), pimInvalidEnable(548), pimAlreadyEnabled(549), ipDvmrpAlreadyEnabled(550), ospfIntfChangeNotAllowedWhenEnabled(551), ospfIntfChangeFromNBMANotAllowed(552), ospfPollIntIsnotMultOfHelloInt(553), ospfNeigNoCircuit(554), ospfNeigSameIp(555), ospfCircNotNBMA(556), ospfCircPriZero(557), ospfNBMANeigExist(558), ospfNBMANeigNotFound(559), ospfDynNeigExist(560), pgmInvalidSessionLifetime(561), pgmInvalidMaxRetxStates(562), pgmInvalidMaxSessions(563), pgmInvalidIfNakRetxInterval(564), pgmInvalidIfMaxNakRetxCnt(565), pgmInvalidIfNakRdataInt(566), pgmInvalidIfNakElimInt(567), maxOfMirroringPortAllowedExceed(568), duplicatedRoutePolicyEntry(569), specifiedRoutePolicyEntryNotFound(570), specifiedPrefixListNotFound(571), routePolicyListNotSpecify(572), routePolicyPrefixListOverLimit(573), ipPrefixListDuplicate(574), ipPrefixListDuplicateEntry(575), ipPrefixListEntryNotFound(576), ipPrefixListInvalidName(577), ipRedistributeDuplicateEntry(578), ipRedistributeEntryNotFound(579), ipOspfInFilterDuplicateEntry(580), ipOspfInFilterEntryNotFound(581), ipEcmpNotDisabled(582), ipEcmpMaxExceeded(583), ipfQosTrafficAvgRateZeroProfileEnable(584), ipmTimePruneEntryInvalidGroup(585), ipmTimePruneEntryDuplicate(586), ipmTimePruneEntryNotExist(587), ipmTimePruneEntryInvalidExpireTime(588), smltIstExist(589), smltSmltIdExist(590), smltIstNotExist(591), smltSmltIsEnabled(592), smltSmltLocalIpNotExist(593), smltInvalidPortTypeForIstMlt(594), ntpServerAlreadyExist(595), ntpServerDoesNotExist(596), ntpKeyAlreadyExists(597), ntpKeyDoesNotExist(598), ntpMaxKeyExceeded(599), ntpServerAlreadyEnabled(600), ntpServerAlreadyDisabled(601), ntpNoServerConfigured(602), ntpMaxServerNumExceeded(603), ntpInvalidIntervalValue(604), ecmpNotEnabled(605), ipfInvalidProtocolType(606), assignIpToPortInRouteVlan(607), assignIpToVlanWithRoutePortMember(608), ipfIstPort(609), smltMltIpfExist(610), smltMltPortIpfExist(611), smltL2fIstPort(612), smltMltL2fExist(613), smltMltPortL2fExist(614), portMirroringEgressNotSupportFullDuplexMode(615), pimGlobInvalidRegSupprTimeOut(616), smltNotAvailableIn8100(617), mltNoPort(618), mltInvalidPortType(619), inUsedByATM1483Elan(620), smltIstStpEnableNotAllowed(621), invalidHighestVrrpPrio(622), dynamicPortMemberIn8100IsNotAllowed(623), ipfGlobalNextHopModeNotSupported(624), smltPeerIpNotExist(625), smltMltNoThisVlan(626), smltNotANormalMlt(627), validStaticRtExist(628), validBlkHolRtExist(629), pimOrIgmpAlreadyEnabled(630), communityAlreadyExists(9101), communityDoesnotExist(9102), communityStorageTypePermanent(9103), portMirroringTxNotSupportForThisHardwareRevision(9301), cannotSetMode(9302), cannotSetFraming(9303), cannotModifyInLaneMode(9304), stpIsNotAllowedToBeEnabledOnIstPort(9305), mirroredPortSupportRXModeOnly(9306), recordReserveTypeInvalid(9401), recordReserveOutOfRange(9402), recordReserveExceedPhyLim(9403), ospfOverlappingSummarizedRange(9601), vlanWithIPXEnabledCannotAdd10GEPortOrMlt(1101), circuitlestInvalidIpInterfaceId(1501), circuitlessMaxNumberIpInterfacesReached(1502), circuitDoesNotExist(1503), circuitAlreadyExists(1504), circuitlessIpInterfacesOperationNotAllowed(1505), priority255SpecialForPhyIpSameAsVrIp(1506), icmpRdiscInvalidPreferenceLevel(1507), icmpRdiscAdvAddrIsNotBroadcastOrMulticastAddr(1508), icmpRdiscInvalidMaxAdvInt(1509), icmpRdiscMinAdvIntervalGreaterThanMaxAdvIntervalOrLessThan3Secs(1510), icmpRdiscLifeTimeLessThanMaxAdvIntervalOrGreaterThan9000Secs(1511), vrrpInvalidFasterAdvertInterval(1512), vrrpFasterAdvEnabled(1513), vrrpFasterAdvDisabled(1514), vrrpInvalidFastAdvEnableValue(1515), globalFiltersNotSupportFwdingNextHopMode(1516), igmpOutOfSsmRange(2301), igmpDuplicateSsmTblEntry(2302), igmpSsmEntryDoesNotExist(2303), igmpSsmTblNotEmpty(2304), igmpRpSetExistsInSsmRange(2305), igmpCandidateRpExistsInSsmRange(2306), ipfStreamAlreadyExists(2401), ipfStreamDoesNotExists(2402), ipfStreamInvalidStreamType(2403), ipfStreamInvalidPortOption(2404), ipfStreamNameTooLong(2405), ipfStreamInvalidProtocol(2406), ipfStreamInvalidDscp(2407), ipfDeviceAlreadyExists(2408), ipfDeviceUnknownPlatform(2409), ipfDeviceUnknownDevice(2410), ipfDeviceDoesNotExists(2411), ipfDeviceNameTooLong(2412), cannotDeleteIntMltId(2501), mltNoThisVlan(2502), mltPortsDifferentFramingMode(2503), moreThan2PortsInMlt(2504), portCannotBeAddedToDefualtVLANWithIPXEnabled(2505), portMemberNotSupportSMLT(2506), tenGEPortOrMltCannotBeAddedToVlanWithSmltMember(2507), tenGEPortOrMltCannotRunTogetherWithSMLT(2508), portCannotBeAddedToDefualtVLANWithSMLT(2509), asListOverLimit(2601), communityListOverLimit(2602), mcastMltNotEnabled(2701), mcastMltInvalidSrcMask(2702), mcastMltInvalidGrpMask(2703), mcastMltRedistrNotEnabled(2704), ipxPolicyNetEntryNotFound(3101), ipxPolicyNetDuplicateEntry(3102), ipxPolicyNetListEntryNotFound(3103), ipxPolicyNetListDuplicateEntry(3104), ipxPolicyServEntryNotFound(3105), ipxPolicyServDuplicateEntry(3106), ipxPolicyServeListEntryNotFound(3107), ipxPolicyServListDuplicateEntry(3108), ipxPolicyPolicyEntryNotFound(3109), ipxPlicyPolicyDuplicateEntry(3110), ipxRoutePolicyNetListOverLimit(3111), ipxRoutePolicyServListOverLimit(3112), ipxPolicyRipOutFilterEntryNotFound(3113), ipxPolicySapOutFilterEntryNotFound(3114), ipxPolicyRipInFilterEntryNotFound(3115), ipxPolicySapInFilterEntryNotFound(3116), ipxPolicyIpxNetEntryInvalidName(3117), ipxPolicyIpxServEntryInvalidName(3118), ipxPolicyPolicyEntryInvalidName(3119), vlanHas10GEMemberWhichNotSupportIPX(3120), invalidModeForAtmMDAType(3901), atmInvalidPVCEncapTypeForElan(3902), radiusAuthAcctAttrSame(4101), radiusAuthAcctPortSame(4102), radiusAuthAcctNoServerConfig(4103), pimGlobInvalidUniRouteChangeTimeOut(4801), pimGlobInvalidDiscDataTimeOut(4802), pimGlobInvalidCRPADVTimeOut(4803), pimGlobInvalidBootStrapPeriod(4804), pimStaticRpEnabled(4805), pimStaticRpNotEnabled(4806), pimStaticRpEntryExists(4807), pimStaticRpNoRoute(4808), pimAddressInSsmRange(4809), tcpConnectionNotFound(5101), tcpInvalidState(5102), bgpPeerNotFound(5201), bgpInvalidPeerEnable(5202), bgpInvalidPeerRemoteas(5203), bgpInvalidPeerGroupName(5204), bgpInvalidPeerDefaultOriginate(5205), bgpInvalidPeerEbgpMultiNop(5206), bgpInvalidPeerAdvertisementInterval(5207), bgpInvalidPeerPassword(5208), bgpInvalidPeerWeight(5209), bgpInvalidPeerNextHopSelf(5210), bgpInvalidPeerRoutePolicyIn(5211), bgpInvalidPeerRoutePolicyOut(5212), bgpInvalidPeerRouteReflectorClient(5213), bgpInvalidPeerSoftReconfigurationIn(5214), bgpInvalidPeerSoftReconfiguration(5215), bgpInvalidPeerRemovePrivateAs(5216), bgpInvalidPeerRowStatus(5217), bgpNetworkNotFound(5218), bgpPeerGroupNotFound(5219), bgpInvalidPeerGroupEnable(5220), bgpInvalidPeerGroupRemoteAs(5221), bgpInvalidPeerGroupDefaultOriginate(5222), bgpInvalidPeerGroupUpdateSource(5223), bgpInvalidPeerGroupEbgpMultiHop(5224), bgpInvalidPeerGroupAdvertisementInterval(5225), bgpInvalidPeerGroupPassword(5226), bgpInvalidPeerGroupWeight(5227), bgpInvalidPeerGroupNextHopSelf(5228), bgpInvalidPeerGroupRoutePolicyIn(5229), bgpInvalidPeerGroupRoutePolicyOut(5230), bgpInvalidPeerGroupRouteReflectorClient(5231), bgpInvalidPeerGroupSoftReconfigurationIn(5232), bgpInvalidPeerGroupSoftReconfiguration(5233), bgpInvalidPeerGroupRemovePrivateAs(5234), bgpInvalidPeerGroupHoldTime(5235), bgpInvalidPeerGroupKeepAlive(5236), bgpInvalidPeerGroupRowStatus(5237), bgpInvalidPeerGroupGroupName(5238), bgpAggregateNotFound(5239), bgpInvalidAggregateAsSetGenerate(5240), bgpInvalidAggregateSummaryOnly(5241), bgpInvalidAggregateSuppressPolicy(5242), bgpInvalidAggregateAdvertisePolicy(5243), bgpInvalidAggregateAttributePolicy(5244), bgpOperationNotAllowedWhenBgpIsEnabled(5245), bgpInvalidPeerHoldTime(5246), bgpInvalidPeerKeepAlive(5247), bgpInvalidPeerMaxPrefix(5248), bgpInvalidPeerGroupMaxPrefix(5249), bgpInvalidPeerMD5Authentication(5250), bgpInvalidPeerGroupMD5Authentication(5251), bgpInvalidPeerGroupIndex(5252), bgpInvalidConfederationIdentifier(5253), bgpInvalidConfederationPeerAsNumber(5254), bgpInvalidConfederationPeerNotFound(5255), bgpInvalidConfederationPeerAlreadyExist(5256), bgpOperationNotAllowedWhenSoftReconfigInIsDisabled(5257), bgpOpNotAllowedSoftReconfigInIsDisabledForTheGrpOrAnyPeerInGrp(5258), bgpCanNotEnablePeerWithoutConfigurRemoteAsForThePeer(5259), bgpCanNotEnablePeerGrpWoConfigRemoteASPeerGrpOrAnyPeerInGrp(5260), bgpOperationNotAllowedWhenPeerIsBGPON(5261), bgpOperationNotAllowedWhenPeerGroupOrAnyPeerInGroupIsBGPON(5262), bgpOperationNotAllowedExternalPeer(5263), bgpOperationNotAllowedInternalPeer(5264), asListNotFound(5265), asListDuplicate(5266), asListAsPathEntryNotFound(5267), asListAsPathEntryDuplicate(5268), asListInvalidModeOfAsPathEntry(5269), asListInvalidAsRegularExpressionOfAsPathEntry(5270), asListInvalidRowStatusOfAsPathEntry(5271), communityListNotFound(5272), communityListDuplicate(5273), communityListCommunityPathEntryNotFound(5274), communityListCommunityPathEntryDuplicate(5275), communityListInvalidModeOfCommunityPathEntry(5276), communityListInvalidValueOfCommunityEntry(5277), communityListInvalidRowStatusOfCommunityEntry(5278), bgpFeatureNotSupport(5279), sshEnableTrue(5501), sshRsaKeyNotExist(5502), sshDsaKeyNotExist(5503), sshGenRsaKeyNotSelect(5504), sshGenDsaKeyNotSelect(5505), sshShutDownInProcess(5506), readWriteAccessReadOnly(900), readWriteAccessLevelOne(901), readWriteAccessLevelTwo(902), readWriteAccessLevelThree(903), readWriteAccessReadWrite(904), readWriteAccessReadWriteAll(905), readWriteAccessUnknownLevel(906)  

rcErrorSendTrap 1.3.6.1.4.1.2272.1.20.5
Indicates whether to send trap upon receiving an error in the system.
OBJECT-TYPE    
  TruthValue  

rcTraps 1.3.6.1.4.1.2272.1.21
OBJECT IDENTIFIER    

rcCardDown 1.3.6.1.4.1.2272.1.21.1
A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the down state.
NOTIFICATION-TYPE    
  rcCardIndex  
  rcCardAdminStatus  
  rcCardOperStatus  

rcCardUp 1.3.6.1.4.1.2272.1.21.2
A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the up state.
NOTIFICATION-TYPE    
  rcCardIndex  
  rcCardAdminStatus  
  rcCardOperStatus  

rcErrorNotification 1.3.6.1.4.1.2272.1.21.3
A rcErrorNotification trap signifies that the SNMPv2 entity, acting in an agent role, has detected that an error condition has occured.
NOTIFICATION-TYPE    
  rcErrorLevel  
  rcErrorCode  
  rcErrorText  

rcStpNewRoot 1.3.6.1.4.1.2272.1.21.4
A rcStpNewRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has declared the device to be the new root of the spanning tree.
NOTIFICATION-TYPE    
  rcStgId  

rcStpTopologyChange 1.3.6.1.4.1.2272.1.21.5
A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change event.
NOTIFICATION-TYPE    
  rcStgId  
  rcPortIndex  

rcChasPowerSupplyDown 1.3.6.1.4.1.2272.1.21.6
A rcChasPowerSupplyDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its power supply unit is about to transition into the down state.
NOTIFICATION-TYPE    
  rcChasPowerSupplyId  
  rcChasPowerSupplyOperStatus  

rcChasFanDown 1.3.6.1.4.1.2272.1.21.7
A rcChasFanDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply unit is about to transition into the down state.
NOTIFICATION-TYPE    
  rcChasFanId  
  rcChasFanOperStatus  

rcLinkOscillation 1.3.6.1.4.1.2272.1.21.8
A rcLinkOscillation trap signifies that the SNMPv2 entity, acting in an agent role, has detected an excessive number of link state transitions on the specified port.
NOTIFICATION-TYPE    
  rcPortIndex  

rcMacViolation 1.3.6.1.4.1.2272.1.21.9
A rcMacViolation trap signifies that the SNMPv2 entity, acting in an agent role, has received a PDU with an invalid source MAC address.
NOTIFICATION-TYPE    
  rcErrorText  
  rcPortIndex  

rcSonetTrap 1.3.6.1.4.1.2272.1.21.10
A rcSonetTrap trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change of status on a Sonet port.
NOTIFICATION-TYPE    
  rcPortIndex  
  rcPosSonetTrapType  
  rcPosSonetTrapIndication  

rc2kCardDown 1.3.6.1.4.1.2272.1.21.11
A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the down state.
NOTIFICATION-TYPE    
  rc2kCardIndex  
  rc2kCardFrontAdminStatus  
  rc2kCardFrontOperStatus  

rc2kCardUp 1.3.6.1.4.1.2272.1.21.12
A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the up state.
NOTIFICATION-TYPE    
  rc2kCardIndex  
  rc2kCardFrontAdminStatus  
  rc2kCardFrontOperStatus  

rc2kTemperature 1.3.6.1.4.1.2272.1.21.13
A rc2kTemperature trap signifies that the SNMPv2 entity, acting in an agent role, has detected the chassis is over-heating.
NOTIFICATION-TYPE    
  rc2kChassisTemperature  

rcChasPowerSupplyUp 1.3.6.1.4.1.2272.1.21.14
A rcChasPowerSupplyUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its power supply unit is about to transition into the up state.
NOTIFICATION-TYPE    
  rcChasPowerSupplyId  
  rcChasPowerSupplyOperStatus  

rc2kAtmPvcLinkStateChange 1.3.6.1.4.1.2272.1.21.15
A rc2kAtmPvcLinkStateChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rc2kAtmPvcOamVcStatus object for one of PVC is about to transition into different state, either from up to down or from down to up.
NOTIFICATION-TYPE    
  rc2kAtmPvcIfIndex  
  rc2kAtmPvcVpi  
  rc2kAtmPvcVci  
  rc2kAtmPvcOamVcStatus  

rcSmltIstLinkUp 1.3.6.1.4.1.2272.1.21.17
A rcSmltIstLinkUp trap signifies that the split MLT link is from down to up.
NOTIFICATION-TYPE    

rcSmltIstLinkDown 1.3.6.1.4.1.2272.1.21.18
A rcSmltIstLinkDown trap signifies that the split MLT link is from up to down.
NOTIFICATION-TYPE    

rcSmltLinkUp 1.3.6.1.4.1.2272.1.21.19
A rcMltSmltId trap signifies that the split SMLT link is up.
NOTIFICATION-TYPE    
  rcMltSmltId  

rcSmltLinkDown 1.3.6.1.4.1.2272.1.21.20
A rcMltSmltId trap signifies that the split SMLT link is down.
NOTIFICATION-TYPE    
  rcMltSmltId  

rcChasFanUp 1.3.6.1.4.1.2272.1.21.21
A rcChasFanUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply unit is about to transition into the up state.
NOTIFICATION-TYPE    
  rcChasFanId  
  rcChasFanOperStatus  

rcPasswordChange 1.3.6.1.4.1.2272.1.21.22
A rcPasswordChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the cli password is changed.
NOTIFICATION-TYPE    
  rcErrorText  

rcSyslog 1.3.6.1.4.1.2272.1.22
OBJECT IDENTIFIER    

rcSyslogGlobal 1.3.6.1.4.1.2272.1.22.1
OBJECT IDENTIFIER    

rcSyslogGlobalEnable 1.3.6.1.4.1.2272.1.22.1.1
Used to enable/disable the SysLog feature. When enabled this feature will send a message to a server on a network that this configured to receive and store diagnostic messages from this device. The type of messages sent is user configurable.
OBJECT-TYPE    
  TruthValue  

rcSyslogGlobalMaxHosts 1.3.6.1.4.1.2272.1.22.1.2
Maximun number of remote hosts considered 'active' and able to receive messages from the Syslog service on the router.
OBJECT-TYPE    
  INTEGER 0..10  

rcSyslogGlobalOperState 1.3.6.1.4.1.2272.1.22.1.3
The operational state of the syslog service on the router.
OBJECT-TYPE    
  INTEGER active(1), inactive(2), emptyHostTbl(3), allHostDisabled(4)  

rcSyslogHostTbl 1.3.6.1.4.1.2272.1.22.2
Table of remote host destinations for syslog.
OBJECT-TYPE    
  SEQUENCE OF  
    RcSyslogHostEntry

rcSyslogHostEntry 1.3.6.1.4.1.2272.1.22.2.1
Entry containing information for a particular entry in rcSyslogHostTable.
OBJECT-TYPE    
  RcSyslogHostEntry  

rcSyslogHostId 1.3.6.1.4.1.2272.1.22.2.1.1
Host Id.
OBJECT-TYPE    
  INTEGER 1..10  

rcSyslogHostIpAddr 1.3.6.1.4.1.2272.1.22.2.1.2
Host Ip Address
OBJECT-TYPE    
  IpAddress  

rcSyslogHostUdpPort 1.3.6.1.4.1.2272.1.22.2.1.3
Specifies the UDP port to use to send syslog messages to the host.
OBJECT-TYPE    
  INTEGER 514..530  

rcSyslogHostFacility 1.3.6.1.4.1.2272.1.22.2.1.4
Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7.
OBJECT-TYPE    
  INTEGER local0(128), local1(136), local2(144), local3(152), local4(160), local5(168), local6(176), local7(184)  

rcSyslogHostModuleId 1.3.6.1.4.1.2272.1.22.2.1.5
Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks.
OBJECT-TYPE    
  INTEGER common(1), snmp(2), rmon(4), portmgr(8), chasmgr(16), bridge(32), ospf(64), hwif(128), sim(256), cpp(512), netdrv(1024), vlanmgr(2048), cli(4096), main(8192), p2ip(16384), rcip(32768), rompager(65536), acif(131072), gbip(262144), wdt(524288), tdp(1048576), mandiag(2097152), mantest(4194304), igmp(8388608), ipfil(16777216), mlt(33554432), ippolicy(67108864), ipmc(134217728), syslog(268435456)  

rcSyslogHostModuleId2 1.3.6.1.4.1.2272.1.22.2.1.6
Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks.
OBJECT-TYPE    
  INTEGER  

rcSyslogHostSeverity 1.3.6.1.4.1.2272.1.22.2.1.7
Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'.
OBJECT-TYPE    
  INTEGER info(1), warning(2), error(4), mfg(8), fatal(16)  

rcSyslogHostMapInfoSeverity 1.3.6.1.4.1.2272.1.22.2.1.8
Specifies the syslog severity to use for Accelar INFO messages. Default is INFO.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapWarningSeverity 1.3.6.1.4.1.2272.1.22.2.1.9
Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapErrorSeverity 1.3.6.1.4.1.2272.1.22.2.1.10
Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapMfgSeverity 1.3.6.1.4.1.2272.1.22.2.1.11
Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapFatalSeverity 1.3.6.1.4.1.2272.1.22.2.1.12
Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapTraceMsg 1.3.6.1.4.1.2272.1.22.2.1.13
Specifies the syslog severity to use for syslog trace messages. Default is DEBUG.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostMapTrapMsg 1.3.6.1.4.1.2272.1.22.2.1.14
Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO.
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

rcSyslogHostLogTraceMsgs 1.3.6.1.4.1.2272.1.22.2.1.15
Indicate whether to activate the host to log the syslog trace messages.
OBJECT-TYPE    
  TruthValue  

rcSyslogHostLogTrapMsgs 1.3.6.1.4.1.2272.1.22.2.1.16
Indicate whether to activate the host to log the syslog messages for SNMP traps.
OBJECT-TYPE    
  TruthValue  

rcSyslogHostEnable 1.3.6.1.4.1.2272.1.22.2.1.17
Enable/Disable messages to be sent to syslog host.
OBJECT-TYPE    
  TruthValue  

rcSyslogHostRowStatus 1.3.6.1.4.1.2272.1.22.2.1.18
Used to create/delete entries in the rcSyslogTable.
OBJECT-TYPE    
  RowStatus  

rcDiag 1.3.6.1.4.1.2272.1.23
OBJECT IDENTIFIER    

rcDiagMirrorByPortTable 1.3.6.1.4.1.2272.1.23.1
This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a different port.
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagMirrorByPortEntry

rcDiagMirrorByPortEntry 1.3.6.1.4.1.2272.1.23.1.1
Entry containing mirror by port information.
OBJECT-TYPE    
  RcDiagMirrorByPortEntry  

rcDiagMirrorByPortId 1.3.6.1.4.1.2272.1.23.1.1.1
Entry id.
OBJECT-TYPE    
  INTEGER 1..383  

rcDiagMirrorByPortMirroredPort 1.3.6.1.4.1.2272.1.23.1.1.2
Used to configure the 'mirrored' port. The port where packets are copied from.
OBJECT-TYPE    
  InterfaceIndex  

rcDiagMirrorByPortMirroringPort 1.3.6.1.4.1.2272.1.23.1.1.3
Used to configure the 'mirroring' port. The port where packets are copied to.
OBJECT-TYPE    
  InterfaceIndex  

rcDiagMirrorByPortMode 1.3.6.1.4.1.2272.1.23.1.1.4
Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received on the 'mirrored' port will be copied. 'both' means all traffic on the 'mirrored' port will be copied. 'rxFilter' means packets received on the 'mirrored' port is copied only if it macthes filter criteria.
OBJECT-TYPE    
  INTEGER tx(1), rx(2), both(3), rxFilter(4)  

rcDiagMirrorByPortEnable 1.3.6.1.4.1.2272.1.23.1.1.5
Used to enable/disable this entry.
OBJECT-TYPE    
  TruthValue  

rcDiagMirrorByPortRowStatus 1.3.6.1.4.1.2272.1.23.1.1.6
Row status of this entry.
OBJECT-TYPE    
  RowStatus  

rcDiagMirrorByPortOctapidId 1.3.6.1.4.1.2272.1.23.1.1.7
Octapid Id for a port.
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringTable 1.3.6.1.4.1.2272.1.23.2
Diag Port Conv Steering Table
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagPortConvSteeringEntry

rcDiagPortConvSteeringEntry 1.3.6.1.4.1.2272.1.23.2.1
Entry containing infomation of Diag Port Conv Steering.
OBJECT-TYPE    
  RcDiagPortConvSteeringEntry  

rcDiagPortConvSteeringId 1.3.6.1.4.1.2272.1.23.2.1.1
Entry id.
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringPortOne 1.3.6.1.4.1.2272.1.23.2.1.2
IfIndex for port one
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringPortTwo 1.3.6.1.4.1.2272.1.23.2.1.3
IfIndex for port two
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringMode 1.3.6.1.4.1.2272.1.23.2.1.4
Used to specify the traffic flow that should be captured between ports one and two.
OBJECT-TYPE    
  INTEGER oneToTwo(1), twoToOne(2), both(3)  

rcDiagPortConvSteeringForwardPort 1.3.6.1.4.1.2272.1.23.2.1.5
IfIndex of the port where captured traffic should be forwarded to.
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringEnable 1.3.6.1.4.1.2272.1.23.2.1.6
Enable this entry.
OBJECT-TYPE    
  TruthValue  

rcDiagPortConvSteeringRowStatus 1.3.6.1.4.1.2272.1.23.2.1.7
Used to create/delete entries in the rcDiagMirrorByPortTable.
OBJECT-TYPE    
  RowStatus  

rcDiagMacConvSteeringTable 1.3.6.1.4.1.2272.1.23.3
Diag Mac Conv Steering Table
OBJECT-TYPE    
  SEQUENCE OF  
    RcDiagMacConvSteeringEntry

rcDiagMacConvSteeringEntry 1.3.6.1.4.1.2272.1.23.3.1
Entry containing infomation of Diag Mac Conv Steering.
OBJECT-TYPE    
  RcDiagMacConvSteeringEntry  

rcDiagMacConvSteeringId 1.3.6.1.4.1.2272.1.23.3.1.1
Entry id.
OBJECT-TYPE    
  INTEGER  

rcDiagMacConvSteeringSrcMac 1.3.6.1.4.1.2272.1.23.3.1.2
Source MAC address
OBJECT-TYPE    
  MacAddress  

rcDiagMacConvSteeringDstMac 1.3.6.1.4.1.2272.1.23.3.1.3
Destination MAC address
OBJECT-TYPE    
  MacAddress  

rcDiagMacConvSteeringInPort 1.3.6.1.4.1.2272.1.23.3.1.4
IfIndex of ingress port.
OBJECT-TYPE    
  INTEGER  

rcDiagMacConvSteeringForwardPort 1.3.6.1.4.1.2272.1.23.3.1.5
IfIndex of the port where captured traffic should be forwarded to.
OBJECT-TYPE    
  INTEGER  

rcDiagMacConvSteeringEnable 1.3.6.1.4.1.2272.1.23.3.1.6
Enable this entry.
OBJECT-TYPE    
  TruthValue  

rcDiagMacConvSteeringRowStatus 1.3.6.1.4.1.2272.1.23.3.1.7
Used to create/delete entries in the rcDiagMirrorByPortTable.
OBJECT-TYPE    
  RowStatus  

rcDiagSaveConfig 1.3.6.1.4.1.2272.1.23.10
Used to configure whether the various mirror feature settings should be saved and restored across system reboot.
OBJECT-TYPE    
  TruthValue  

rcDiagMirrorByPortTblSize 1.3.6.1.4.1.2272.1.23.11
Used to indicate table size.
OBJECT-TYPE    
  INTEGER  

rcDiagPortConvSteeringTblSize 1.3.6.1.4.1.2272.1.23.12
Used to indicate table size.
OBJECT-TYPE    
  INTEGER  

rcDiagMacConvSteeringTblSize 1.3.6.1.4.1.2272.1.23.13
Used to indicate table size.
OBJECT-TYPE    
  INTEGER  

rcDiagDiagnosticsEnable 1.3.6.1.4.1.2272.1.23.14
Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring tables.
OBJECT-TYPE    
  TruthValue  

rcIpx 1.3.6.1.4.1.2272.1.24
OBJECT IDENTIFIER    

rcIpxRoutingEnable 1.3.6.1.4.1.2272.1.24.1
Global Ipx Routing control variable
OBJECT-TYPE    
  TruthValue  

rcIpxAddrTable 1.3.6.1.4.1.2272.1.24.2
The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number.
OBJECT-TYPE    
  SEQUENCE OF  
    RcIpxAddrEntry

rcIpxAddrEntry 1.3.6.1.4.1.2272.1.24.2.1
The addressing information for one of this entity's IP addresses.
OBJECT-TYPE    
  RcIpxAddrEntry  

rcIpxAddrVlanId 1.3.6.1.4.1.2272.1.24.2.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER 1..4094  

rcIpxAddrNetAddr 1.3.6.1.4.1.2272.1.24.2.1.2
IPX Network address.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

rcIpxAddrEncap 1.3.6.1.4.1.2272.1.24.2.1.3
Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it.
OBJECT-TYPE    
  INTEGER none(0), ethernetii(1), snap(2), llc(3), raw(4)  

rcIpxAddrEntryStatus 1.3.6.1.4.1.2272.1.24.2.1.4
Used to create/delete entries in the rcIpxAddrEntry.
OBJECT-TYPE    
  RowStatus  

rcPos 1.3.6.1.4.1.2272.1.26
OBJECT IDENTIFIER    

rcPosPppIpxTable 1.3.6.1.4.1.2272.1.26.1
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosPppIpxEntry

rcPosPppIpxEntry 1.3.6.1.4.1.2272.1.26.1.1
OBJECT-TYPE    
  RcPosPppIpxEntry  

rcPosPppIpxIfIndex 1.3.6.1.4.1.2272.1.26.1.1.1
port number.
OBJECT-TYPE    
  InterfaceIndex  

rcPosPppIpxIpxcpAdminStatus 1.3.6.1.4.1.2272.1.26.1.1.2
OBJECT-TYPE    
  INTEGER open(1), close(2)  

rcPosPppIpxOperStatus 1.3.6.1.4.1.2272.1.26.1.1.3
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

rcPosPppIpxNetAddr 1.3.6.1.4.1.2272.1.26.1.1.4
IPX Network address.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

rcPosPppIpxRoutingProtocol 1.3.6.1.4.1.2272.1.26.1.1.5
OBJECT-TYPE    
  INTEGER none(0), rip(2)  

rcPosSonetTable 1.3.6.1.4.1.2272.1.26.2
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosSonetEntry

rcPosSonetEntry 1.3.6.1.4.1.2272.1.26.2.1
OBJECT-TYPE    
  RcPosSonetEntry  

rcPosSonetIndex 1.3.6.1.4.1.2272.1.26.2.1.1
pos ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcPosSonetFraming 1.3.6.1.4.1.2272.1.26.2.1.2
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

rcPosSonetSectionTrace 1.3.6.1.4.1.2272.1.26.2.1.3
config. J0 byte
OBJECT-TYPE    
  INTEGER 1..255  

rcPosSonetSectionGrowth 1.3.6.1.4.1.2272.1.26.2.1.4
config. Z0 byte
OBJECT-TYPE    
  INTEGER 1..255  

rcPosSonetSyncronization 1.3.6.1.4.1.2272.1.26.2.1.5
config. S1 byte
OBJECT-TYPE    
  INTEGER 1..255  

rcPosSonetStsPathTrace 1.3.6.1.4.1.2272.1.26.2.1.6
config. 64/16 byte.
OBJECT-TYPE    
  OCTET STRING SIZE(64)  

rcPosSonetPathSignalLabel 1.3.6.1.4.1.2272.1.26.2.1.7
config. C2 byte
OBJECT-TYPE    
  INTEGER 1..255  

rcPosSonetClockSource 1.3.6.1.4.1.2272.1.26.2.1.8
OBJECT-TYPE    
  INTEGER line(1), internal(2)  

rcPosSonetScramble 1.3.6.1.4.1.2272.1.26.2.1.9
OBJECT-TYPE    
  EnableValue  

rcPosSonetOperStatusFraming 1.3.6.1.4.1.2272.1.26.2.1.10
OBJECT-TYPE    
  INTEGER  

rcPosSonetOperStatusClockSource 1.3.6.1.4.1.2272.1.26.2.1.11
OBJECT-TYPE    
  INTEGER  

rcPosSonetOperStatusScramble 1.3.6.1.4.1.2272.1.26.2.1.12
OBJECT-TYPE    
  EnableValue  

rcPosSonetOperStatusSectionTrace 1.3.6.1.4.1.2272.1.26.2.1.13
OBJECT-TYPE    
  INTEGER  

rcPosSonetOperStatusPathSignalLabel 1.3.6.1.4.1.2272.1.26.2.1.14
OBJECT-TYPE    
  INTEGER  

rcPosLineStatusTable 1.3.6.1.4.1.2272.1.26.3
Pos Line Status Table
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosLineStatusEntry

rcPosLineStatusEntry 1.3.6.1.4.1.2272.1.26.3.1
Entry containing infomation of Pos Line Status.
OBJECT-TYPE    
  RcPosLineStatusEntry  

rcPosLineStatusIndex 1.3.6.1.4.1.2272.1.26.3.1.1
pos ifIndex, same as rcPosPppIpxIfIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcPosLineStatusLocalMACAddress 1.3.6.1.4.1.2272.1.26.3.1.2
current local MAC address
OBJECT-TYPE    
  MacAddress  

rcPosLineStatusRemoteMACAddress 1.3.6.1.4.1.2272.1.26.3.1.3
current remote MAC address
OBJECT-TYPE    
  MacAddress  

rcPosLineStatusLocalIpAddr 1.3.6.1.4.1.2272.1.26.3.1.4
current local ip addr
OBJECT-TYPE    
  IpAddress  

rcPosLineStatusRemoteIpAddr 1.3.6.1.4.1.2272.1.26.3.1.5
current remote ip addr
OBJECT-TYPE    
  IpAddress  

rcPosLineStatusOutQuality 1.3.6.1.4.1.2272.1.26.3.1.6
current output quality.
OBJECT-TYPE    
  INTEGER  

rcPosLineStatusLocalPeriod 1.3.6.1.4.1.2272.1.26.3.1.7
OBJECT-TYPE    
  INTEGER  

rcPosLineStatusDeviceType 1.3.6.1.4.1.2272.1.26.3.1.8
OBJECT-TYPE    
  INTEGER  

rcPosLineStatusDeviceRev 1.3.6.1.4.1.2272.1.26.3.1.9
OBJECT-TYPE    
  INTEGER  

rcPosLineStatusIpxRoutingProtocol 1.3.6.1.4.1.2272.1.26.3.1.10
OBJECT-TYPE    
  INTEGER  

rcPosLineConfigTable 1.3.6.1.4.1.2272.1.26.4
Pos Line Config Table
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosLineConfigEntry

rcPosLineConfigEntry 1.3.6.1.4.1.2272.1.26.4.1
Entry containing infomation of Pos Line Config.
OBJECT-TYPE    
  RcPosLineConfigEntry  

rcPosLineConfigIndex 1.3.6.1.4.1.2272.1.26.4.1.1
pos ifIndex, same as rcPosPppIpxIfIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcPosLineConfigLocalMACAddress 1.3.6.1.4.1.2272.1.26.4.1.2
current local MAC address
OBJECT-TYPE    
  MacAddress  

rcPosLineConfigRemoteMACAddress 1.3.6.1.4.1.2272.1.26.4.1.3
current remote MAC address
OBJECT-TYPE    
  MacAddress  

rcPosLineConfigLocalIpAddr 1.3.6.1.4.1.2272.1.26.4.1.4
current local ip addr
OBJECT-TYPE    
  IpAddress  

rcPosLineConfigRemoteIpAddr 1.3.6.1.4.1.2272.1.26.4.1.5
current remote ip addr
OBJECT-TYPE    
  IpAddress  

rcPosLineConfigRemoteReportPeriod 1.3.6.1.4.1.2272.1.26.4.1.6
config. remote report period.
OBJECT-TYPE    
  INTEGER 1..60  

rcPosLineConfigLqrThreshold 1.3.6.1.4.1.2272.1.26.4.1.7
config. input quality.
OBJECT-TYPE    
  INTEGER 1..100  

rcPosLineConfigOutQuality 1.3.6.1.4.1.2272.1.26.4.1.8
config. output quality.
OBJECT-TYPE    
  INTEGER  

rcPosLineConfigPppStp 1.3.6.1.4.1.2272.1.26.4.1.9
STP PPP encoding enable T/F
OBJECT-TYPE    
  EnableValue  

rcPosLineConfigLoopBack 1.3.6.1.4.1.2272.1.26.4.1.10
perform loop-back.
OBJECT-TYPE    
  TruthValue  

rcPosLineConfigIpxVlanMacAddress 1.3.6.1.4.1.2272.1.26.4.1.11
OBJECT-TYPE    
  MacAddress  

rcPosLineConfigIpxRemoteMacAddress 1.3.6.1.4.1.2272.1.26.4.1.12
OBJECT-TYPE    
  MacAddress  

rcPosSonetTrap 1.3.6.1.4.1.2272.1.26.5
OBJECT IDENTIFIER    

rcPosSonetTrapType 1.3.6.1.4.1.2272.1.26.5.1
Used to indicate a particular type of Sonet trap.
OBJECT-TYPE    
  INTEGER sectionAlarm(1), lineAlarm(2), pathAlarm(3)  

rcPosSonetTrapIndication 1.3.6.1.4.1.2272.1.26.5.2
Used to indicate an indication for a Sonet trap.
OBJECT-TYPE    
  INTEGER noDefect(1), sectionLossOfSignal(2), sectionLossOfFrame(3), lineAlarmIndication(4), lineRemoteDefectIndication(5), pathLossOfPointer(6), pathAlarmIndication(7), pathRemoteDefectIndication(8), pathUnequipped(9), pathSignalLabelMismatch(10), pathTraceMismatch(11)  

rcPosSioCardConfigTable 1.3.6.1.4.1.2272.1.26.6
Pos Sio Card Config Table
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosSioCardConfigEntry

rcPosSioCardConfigEntry 1.3.6.1.4.1.2272.1.26.6.1
Entry containing infomation of Pos Sio Card Config.
OBJECT-TYPE    
  RcPosSioCardConfigEntry  

rcPosSioCardConfigSlotIndex 1.3.6.1.4.1.2272.1.26.6.1.1
slot Index.
OBJECT-TYPE    
  INTEGER  

rcPosSioCardConfigAction 1.3.6.1.4.1.2272.1.26.6.1.2
OBJECT-TYPE    
  INTEGER other(0), reset(1)  

rcPosSioCardConfigTraceMode 1.3.6.1.4.1.2272.1.26.6.1.3
OBJECT-TYPE    
  INTEGER other(0), traceOn(1)  

rcPosSioCardConfigImageFileName 1.3.6.1.4.1.2272.1.26.6.1.4
POS Image file name.
OBJECT-TYPE    
  DisplayString  

rcPosOperStatusTable 1.3.6.1.4.1.2272.1.26.7
OBJECT-TYPE    
  SEQUENCE OF  
    RcPosOperStatusEntry

rcPosOperStatusEntry 1.3.6.1.4.1.2272.1.26.7.1
OBJECT-TYPE    
  RcPosOperStatusEntry  

rcPosOperStatusIndex 1.3.6.1.4.1.2272.1.26.7.1.1
pos ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rcPosOperStatusLqrStatus 1.3.6.1.4.1.2272.1.26.7.1.2
Operational status of pppLqrConfigStatus.
OBJECT-TYPE    
  INTEGER  

rcPosOperStatusLineLqrThreshold 1.3.6.1.4.1.2272.1.26.7.1.3
.
OBJECT-TYPE    
  INTEGER  

rcPosOperStatusLinkMagicNumber 1.3.6.1.4.1.2272.1.26.7.1.4
.
OBJECT-TYPE    
  INTEGER  

rcPosOperStatusLinePppStp 1.3.6.1.4.1.2272.1.26.7.1.5
OBJECT-TYPE    
  EnableValue  

rcLinkFlapDetect 1.3.6.1.4.1.2272.1.27
OBJECT IDENTIFIER    

rcLinkFlapDetectAutoPortDownEnable 1.3.6.1.4.1.2272.1.27.1
Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If the number exceeds a given bound the port will be forced out-of-service.
OBJECT-TYPE    
  TruthValue  

rcLinkFlapDetectSendTrap 1.3.6.1.4.1.2272.1.27.2
Used to configure whether a trap should be sent if the port is forced out-of-service.
OBJECT-TYPE    
  TruthValue  

rcLinkFlapDetectFrequency 1.3.6.1.4.1.2272.1.27.3
Used to configure the number of times the port can go down.
OBJECT-TYPE    
  INTEGER 1..9999  

rcLinkFlapDetectInterval 1.3.6.1.4.1.2272.1.27.4
Used to configure the interval (in minutes).
OBJECT-TYPE    
  INTEGER 2..600  

rcV1Traps 1.3.6.1.4.1.2272.1.28
OBJECT IDENTIFIER    

rcRadius 1.3.6.1.4.1.2272.1.29
OBJECT IDENTIFIER    

rcRadiusGlobal 1.3.6.1.4.1.2272.1.29.1
OBJECT IDENTIFIER    

rcRadiusGlobalEnable 1.3.6.1.4.1.2272.1.29.1.1
Enable/disable this feature.
OBJECT-TYPE    
  TruthValue  

rcRadiusGlobalMaxNumberServer 1.3.6.1.4.1.2272.1.29.1.2
Maximum number of RADIUS servers.
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusGlobalAttributeValue 1.3.6.1.4.1.2272.1.29.1.3
Integer value for Access-Priority attribute.
OBJECT-TYPE    
  INTEGER 192..240  

rcRadiusGlobalServerTableSize 1.3.6.1.4.1.2272.1.29.1.4
Used to indicate the number of entries in the rcRadiusServerTable.
OBJECT-TYPE    
  INTEGER  

rcRadiusServerTable 1.3.6.1.4.1.2272.1.29.2
The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server.
OBJECT-TYPE    
  SEQUENCE OF  
    RcRadiusServerEntry

rcRadiusServerEntry 1.3.6.1.4.1.2272.1.29.2.1
A RADIUS server table entry.
OBJECT-TYPE    
  RcRadiusServerEntry  

rcRadiusServerPriority 1.3.6.1.4.1.2272.1.29.2.1.1
Server priority, used to control which server to choose first to send authentication.
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServerAddress 1.3.6.1.4.1.2272.1.29.2.1.2
Server IP address of the RADIUS authentication server referred to in this table entry.
OBJECT-TYPE    
  IpAddress  

rcRadiusServerTimeOut 1.3.6.1.4.1.2272.1.29.2.1.3
The time interval in seconds before the client retransmit the packet.
OBJECT-TYPE    
  INTEGER 1..10  

rcRadiusServerEnable 1.3.6.1.4.1.2272.1.29.2.1.4
Enable or disable this server.
OBJECT-TYPE    
  TruthValue  

rcRadiusServerMaxRetries 1.3.6.1.4.1.2272.1.29.2.1.5
Maximum number of retransmissions.
OBJECT-TYPE    
  INTEGER 1..6  

rcRadiusServerUdpPort 1.3.6.1.4.1.2272.1.29.2.1.6
The UDP port the client is using to send requests to this server.
OBJECT-TYPE    
  INTEGER 1..65536  

rcRadiusServerSecretKey 1.3.6.1.4.1.2272.1.29.2.1.7
The identifier of the RADIUS authentication client.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rcRadiusServerAccessRequests 1.3.6.1.4.1.2272.1.29.2.1.8
The number of RADIUS access-response packets sent to this server. This does not include retransmissions.
OBJECT-TYPE    
  Counter  

rcRadiusServerAccessAccepts 1.3.6.1.4.1.2272.1.29.2.1.9
The number of RADIUS access-accept packets (valid or invalid) received from this server.
OBJECT-TYPE    
  Counter  

rcRadiusServerAccessRejects 1.3.6.1.4.1.2272.1.29.2.1.10
The number of RADIUS access-reject packets (valid or invalid) received from this server.
OBJECT-TYPE    
  Counter  

rcRadiusServerBadResponses 1.3.6.1.4.1.2272.1.29.2.1.11
The number of RADIUS invalid access-response packets received from this server.
OBJECT-TYPE    
  Counter  

rcRadiusServerPendingRequests 1.3.6.1.4.1.2272.1.29.2.1.12
The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission.
OBJECT-TYPE    
  Counter  

rcRadiusServerClientRetries 1.3.6.1.4.1.2272.1.29.2.1.13
The number of authentication retransmission to this server.
OBJECT-TYPE    
  Counter  

rcRadiusServerRowStatus 1.3.6.1.4.1.2272.1.29.2.1.14
Used to create/delete entries.
OBJECT-TYPE    
  RowStatus  

rcIgmp 1.3.6.1.4.1.2272.1.30
OBJECT IDENTIFIER    

rcIgmpInterfaceExtnTable 1.3.6.1.4.1.2272.1.30.1
OBJECT-TYPE    
  SEQUENCE OF  
    RcIgmpInterfaceExtnEntry

rcIgmpInterfaceExtnEntry 1.3.6.1.4.1.2272.1.30.1.1
OBJECT-TYPE    
  RcIgmpInterfaceExtnEntry  

rcIgmpInterfaceExtnIfIndex 1.3.6.1.4.1.2272.1.30.1.1.1
ifindex.
OBJECT-TYPE    
  InterfaceIndex  

rcIgmpInterfaceExtnSnoopEnable 1.3.6.1.4.1.2272.1.30.1.1.2
enable snoop.
OBJECT-TYPE    
  TruthValue  

rcIgmpInterfaceExtnProxySnoopEnable 1.3.6.1.4.1.2272.1.30.1.1.3
enable proxy snoop.
OBJECT-TYPE    
  TruthValue  

rcIgmpInterfaceExtnMaxAdvertiseInterval 1.3.6.1.4.1.2272.1.30.1.1.4
OBJECT-TYPE    
  INTEGER 2..180  

rcIgmpInterfaceExtnMinAdvertiseInterval 1.3.6.1.4.1.2272.1.30.1.1.5
OBJECT-TYPE    
  INTEGER 3..180  

rcIgmpInterfaceExtnMaxInitialAdvertiseInterval 1.3.6.1.4.1.2272.1.30.1.1.6
OBJECT-TYPE    
  INTEGER  

rcIgmpInterfaceExtnMaxInitialAdvertments 1.3.6.1.4.1.2272.1.30.1.1.7
OBJECT-TYPE    
  INTEGER  

rcIgmpInterfaceExtnNeighborDeadInterval 1.3.6.1.4.1.2272.1.30.1.1.8
OBJECT-TYPE    
  INTEGER  

rcIgmpInterfaceExtnFastLeaveEnable 1.3.6.1.4.1.2272.1.30.1.1.9
Enable fast leave on this interface.
OBJECT-TYPE    
  TruthValue  

rcIgmpInterfaceExtnFastLeavePortMembers 1.3.6.1.4.1.2272.1.30.1.1.10
The set of ports that are enabled for fast leave.
OBJECT-TYPE    
  PortSet  

rcIgmpInterfaceExtnMrdiscEnable 1.3.6.1.4.1.2272.1.30.1.1.11
Enable/disable multicast router discovery.
OBJECT-TYPE    
  TruthValue  

rcIgmpInterfaceExtnDiscoveredRouterPorts 1.3.6.1.4.1.2272.1.30.1.1.12
list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol.
OBJECT-TYPE    
  PortSet  

rcIgmpInterfaceExtnSnoopMRouterPorts 1.3.6.1.4.1.2272.1.30.1.1.13
The set of ports in this interface that provide connectivity to an IP Multicast router.
OBJECT-TYPE    
  PortSet  

rcIgmpInterfaceExtnSnoopActiveMRouterPorts 1.3.6.1.4.1.2272.1.30.1.1.14
Active ports.
OBJECT-TYPE    
  PortSet  

rcIgmpInterfaceExtnSnoopMRouterExpiration 1.3.6.1.4.1.2272.1.30.1.1.15
Multicast querier router aging time out.
OBJECT-TYPE    
  INTEGER  

rcIgmpInterfaceExtnFlushAction 1.3.6.1.4.1.2272.1.30.1.1.16
IGMP flush action.
OBJECT-TYPE    
  INTEGER none(1), flushGrpMember(2), flushMrouter(3), flushSender(4)  

rcIgmpInterfaceExtnRouterAlertEnable 1.3.6.1.4.1.2272.1.30.1.1.17
Enable Router Alert Check.
OBJECT-TYPE    
  EnableValue  

rcIgmpStaticTable 1.3.6.1.4.1.2272.1.30.2
OBJECT-TYPE    
  SEQUENCE OF  
    RcIgmpStaticEntry

rcIgmpStaticEntry 1.3.6.1.4.1.2272.1.30.2.1
OBJECT-TYPE    
  RcIgmpStaticEntry  

rcIgmpStaticIfIndex 1.3.6.1.4.1.2272.1.30.2.1.1
ifindex
OBJECT-TYPE    
  InterfaceIndex  

rcIgmpStaticGrpAddr 1.3.6.1.4.1.2272.1.30.2.1.2
ip multicast addr.
OBJECT-TYPE    
  IpAddress  

rcIgmpStaticMemberPorts 1.3.6.1.4.1.2272.1.30.2.1.3
egressing ports.
OBJECT-TYPE    
  PortSet  

rcIgmpStaticNotAllowedToJoin 1.3.6.1.4.1.2272.1.30.2.1.4
not allowed to join.
OBJECT-TYPE    
  PortSet  

rcIgmpStaticRowStatus 1.3.6.1.4.1.2272.1.30.2.1.5
Used to create/delete entries in the rcIgmpStaticEntry.
OBJECT-TYPE    
  RowStatus  

rcIgmpAccessTable 1.3.6.1.4.1.2272.1.30.3
OBJECT-TYPE    
  SEQUENCE OF  
    RcIgmpAccessEntry

rcIgmpAccessEntry 1.3.6.1.4.1.2272.1.30.3.1
OBJECT-TYPE    
  RcIgmpAccessEntry  

rcIgmpAccessIfIndex 1.3.6.1.4.1.2272.1.30.3.1.1
ifindex
OBJECT-TYPE    
  InterfaceIndex  

rcIgmpAccessGrpAddr 1.3.6.1.4.1.2272.1.30.3.1.2
ip multicast addr.
OBJECT-TYPE    
  IpAddress  

rcIgmpAccessHostAddr 1.3.6.1.4.1.2272.1.30.3.1.3
host addr.
OBJECT-TYPE    
  IpAddress  

rcIgmpAccessMode 1.3.6.1.4.1.2272.1.30.3.1.4
denyTX(1), denyRX(2), denyBOTH(3).
OBJECT-TYPE    
  INTEGER denyTX(1), denyRX(2), denyBOTH(3)  

rcIgmpAccessRowStatus 1.3.6.1.4.1.2272.1.30.3.1.5
Used to create/delete entries in the rcIgmpAccessEntry.
OBJECT-TYPE    
  RowStatus  

rcIgmpAccessHostMask 1.3.6.1.4.1.2272.1.30.3.1.6
host mask.
OBJECT-TYPE    
  IpAddress  

rcIgmpSenderTable 1.3.6.1.4.1.2272.1.30.4
OBJECT-TYPE    
  SEQUENCE OF  
    RcIgmpSenderEntry

rcIgmpSenderEntry 1.3.6.1.4.1.2272.1.30.4.1
OBJECT-TYPE    
  RcIgmpSenderEntry  

rcIgmpSenderGrpAddr 1.3.6.1.4.1.2272.1.30.4.1.1
ip multicast addr.
OBJECT-TYPE    
  IpAddress  

rcIgmpSenderIfIndex 1.3.6.1.4.1.2272.1.30.4.1.2
ifindex
OBJECT-TYPE    
  InterfaceIndex  

rcIgmpSenderMemberAddr 1.3.6.1.4.1.2272.1.30.4.1.3
host addr.
OBJECT-TYPE    
  IpAddress  

rcIgmpSenderAction 1.3.6.1.4.1.2272.1.30.4.1.4
none(0), flushEntry(1), flushGrp(2).
OBJECT-TYPE    
  INTEGER none(0), flushEntry(1), flushGrp(2)  

rcIgmpSenderTPort 1.3.6.1.4.1.2272.1.30.4.1.5
Igmp Sender Tport.
OBJECT-TYPE    
  INTEGER  

rcUserSetTime 1.3.6.1.4.1.2272.1.31
OBJECT IDENTIFIER    

rcUserSetTimeYear 1.3.6.1.4.1.2272.1.31.1
Year of the time.
OBJECT-TYPE    
  INTEGER 1998..2097  

rcUserSetTimeMonth 1.3.6.1.4.1.2272.1.31.2
Month of the time.
OBJECT-TYPE    
  INTEGER 1..12  

rcUserSetTimeDate 1.3.6.1.4.1.2272.1.31.3
Date of the time.
OBJECT-TYPE    
  INTEGER 1..31  

rcUserSetTimeHour 1.3.6.1.4.1.2272.1.31.4
Hour of the time.
OBJECT-TYPE    
  INTEGER 0..23  

rcUserSetTimeMinute 1.3.6.1.4.1.2272.1.31.5
Minute of the time.
OBJECT-TYPE    
  INTEGER 0..59  

rcUserSetTimeSecond 1.3.6.1.4.1.2272.1.31.6
Second of the time.
OBJECT-TYPE    
  INTEGER 0..59  

rcL2Redundancy 1.3.6.1.4.1.2272.1.32
OBJECT IDENTIFIER    

rcL2RedundancyHaCpuState 1.3.6.1.4.1.2272.1.32.1
Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (1). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). synchronized - Table based synchroniztion was completed on the current CPU (3). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (4). error - If an invalid event is generated in a given state the CPU enters Error state (5). disabled - High Availability is not enabled (6).
OBJECT-TYPE    
  INTEGER initialization(0), oneWayActive(1), twoWayActive(2), synchronized(3), remoteIncompatible(4), error(5), disabled(6)  

rcL2RedundancyHaEvent 1.3.6.1.4.1.2272.1.32.2
Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Active state. Locally or message received from remote CPU. tableSynchronizationDone (2) - Causes the CPU to transfer to Synchronized state. versionIncompatible (3) - Causes the CPU to go to Remote Incompatible state noEvent (4) - Means no event has occured uptill now.
OBJECT-TYPE    
  INTEGER restart(0), systemRegistrationDone(1), tableSynchronizationDone(2), versionIncompatible(3), noEvent(4)  

rcL2RedundancyEnable 1.3.6.1.4.1.2272.1.32.3
Indicate the feature enable/disable.
OBJECT-TYPE    
  EnableValue  

rcL2RedundancyStandbyCpu 1.3.6.1.4.1.2272.1.32.4
Indicate if the L2 Redundancy is enabled on the standby CPU.
OBJECT-TYPE    
  INTEGER hotStandbyCPU(1), warmStandbyCPU(2), standbyCPUNotPresent(3)  

rcNtp 1.3.6.1.4.1.2272.1.33
OBJECT IDENTIFIER    

rcNtpGlobal 1.3.6.1.4.1.2272.1.33.1
OBJECT IDENTIFIER    

rcNtpGlobalEnable 1.3.6.1.4.1.2272.1.33.1.1
Enable/disable NTP feature
OBJECT-TYPE    
  TruthValue  

rcNtpGlobalInterval 1.3.6.1.4.1.2272.1.33.1.2
Time interval between successive NTP updates in minutes.
OBJECT-TYPE    
  INTEGER 10..1440  

rcNtpServerTable 1.3.6.1.4.1.2272.1.33.2
The NTP server table. This table lists the information of a NTP server
OBJECT-TYPE    
  SEQUENCE OF  
    RcNtpServerEntry

rcNtpServerEntry 1.3.6.1.4.1.2272.1.33.2.1
A NTP server table entry.
OBJECT-TYPE    
  RcNtpServerEntry  

rcNtpServerAddress 1.3.6.1.4.1.2272.1.33.2.1.1
Server IP address of NTP time source referred to in this table entry.
OBJECT-TYPE    
  IpAddress  

rcNtpServerEnable 1.3.6.1.4.1.2272.1.33.2.1.2
Enable or disable this server for participation in time update.
OBJECT-TYPE    
  TruthValue  

rcNtpServerAuthentication 1.3.6.1.4.1.2272.1.33.2.1.3
Enable or disable the MD5 Authentication on this serve.
OBJECT-TYPE    
  TruthValue  

rcNtpServerKeyId 1.3.6.1.4.1.2272.1.33.2.1.4
Public Key used to generate MD5 digest for this server.
OBJECT-TYPE    
  INTEGER 0..2147483647  

rcNtpServerAccessAttempts 1.3.6.1.4.1.2272.1.33.2.1.5
The number of NTP requests sent to this server
OBJECT-TYPE    
  Counter  

rcNtpServerAccessSuccess 1.3.6.1.4.1.2272.1.33.2.1.6
The number of times this server was selected to update the time
OBJECT-TYPE    
  Counter  

rcNtpServerAccessFailure 1.3.6.1.4.1.2272.1.33.2.1.7
The number of times this server was rejected from updating the time
OBJECT-TYPE    
  Counter  

rcNtpServerRowStatus 1.3.6.1.4.1.2272.1.33.2.1.8
Used to create/delete entries.
OBJECT-TYPE    
  RowStatus  

rcNtpKeyTable 1.3.6.1.4.1.2272.1.33.3
The NTP key table. This table lists the private key of the public key Id
OBJECT-TYPE    
  SEQUENCE OF  
    RcNtpKeyEntry

rcNtpKeyEntry 1.3.6.1.4.1.2272.1.33.3.1
A NTP key table entry.
OBJECT-TYPE    
  RcNtpKeyEntry  

rcNtpKeyId 1.3.6.1.4.1.2272.1.33.3.1.1
Public Key used to generate MD5 digest
OBJECT-TYPE    
  INTEGER 1..2147483647  

rcNtpKeySecret 1.3.6.1.4.1.2272.1.33.3.1.2
Private Key used to generate MD5 Digest
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

rcNtpKeyRowStatus 1.3.6.1.4.1.2272.1.33.3.1.3
Used to create/delete entries.
OBJECT-TYPE    
  RowStatus  

rcSsh 1.3.6.1.4.1.2272.1.34
OBJECT IDENTIFIER    

rcSshGlobal 1.3.6.1.4.1.2272.1.34.1
OBJECT IDENTIFIER    

rcSshGlobalVersion 1.3.6.1.4.1.2272.1.34.1.1
SSH version
OBJECT-TYPE    
  INTEGER v2only(1), both(2)  

rcSshGlobalPort 1.3.6.1.4.1.2272.1.34.1.2
SSH connection port.
OBJECT-TYPE    
  INTEGER  

rcSshGlobalMaxSession 1.3.6.1.4.1.2272.1.34.1.3
Number of session allowed.
OBJECT-TYPE    
  INTEGER 0..8  

rcSshGlobalTimeout 1.3.6.1.4.1.2272.1.34.1.4
SSH connection timeout in seconds.
OBJECT-TYPE    
  INTEGER 1..120  

rcSshGlobalRsaKeySize 1.3.6.1.4.1.2272.1.34.1.5
SSH Rsa key size.
OBJECT-TYPE    
  INTEGER 512..1024  

rcSshGlobalDsaKeySize 1.3.6.1.4.1.2272.1.34.1.6
SSH Dsa key size.
OBJECT-TYPE    
  INTEGER 512..1024  

rcSshGlobalRsaAuth 1.3.6.1.4.1.2272.1.34.1.7
Enable/disable SSH RSA authentication
OBJECT-TYPE    
  TruthValue  

rcSshGlobalDsaAuth 1.3.6.1.4.1.2272.1.34.1.8
Enable/disable SSH DSA authentication
OBJECT-TYPE    
  TruthValue  

rcSshGlobalPassAuth 1.3.6.1.4.1.2272.1.34.1.9
Enable/disable SSH RSA authentication
OBJECT-TYPE    
  TruthValue  

rcSshGlobalKeyAction 1.3.6.1.4.1.2272.1.34.1.10
SSH key action.
OBJECT-TYPE    
  INTEGER generateDsa(1), generateRsa(2), deleteDsa(3), deleteRsa(4)  

rcSshGlobalEnable 1.3.6.1.4.1.2272.1.34.1.11
Enable/disable, or securely enable SSH. Securely enable turns off other daemon flag, and it takes ffect afte reboot
OBJECT-TYPE    
  INTEGER false(0), true(1), secure(2)  

rc2k 1.3.6.1.4.1.2272.1.100
OBJECT IDENTIFIER    

rc2kChassis 1.3.6.1.4.1.2272.1.100.1
OBJECT IDENTIFIER    

rc2kChassisPortOperStatus 1.3.6.1.4.1.2272.1.100.1.1
A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0, the next two bits are used for port #1, etc. The status is encoded with the following scheme : value meaning ----- ------- 0 no-link (admin=up, oper=down) 1 up (admin=up, oper=up) 2 down (admin=down, oper=down) 3 testing (admin=test, oper=test)
OBJECT-TYPE    
  OCTET STRING SIZE(256)  

rc2kChassisTemperature 1.3.6.1.4.1.2272.1.100.1.2
Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis.
OBJECT-TYPE    
  Gauge32  

rc2kChassisAmbientLowerTemperature 1.3.6.1.4.1.2272.1.100.1.3
Used to indicate the temperature of the air entering the fan at the lower half of the chassis.
OBJECT-TYPE    
  Gauge32  

rc2kChassisAmbientUpperTemperature 1.3.6.1.4.1.2272.1.100.1.4
Used to indicate the temperature of the air entering the fan at the upper half of the chassis.
OBJECT-TYPE    
  Gauge32  

rc2kChassisBaseMacAddr 1.3.6.1.4.1.2272.1.100.1.5
base mac addr
OBJECT-TYPE    
  MacAddress  

rc2kCpuEthernetPortTable 1.3.6.1.4.1.2272.1.100.2
2k CPU Ethernet Port table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kCpuEthernetPortEntry

rc2kCpuEthernetPortEntry 1.3.6.1.4.1.2272.1.100.2.1
Entry containing infomation of 2k CPU Ethernet Port
OBJECT-TYPE    
  Rc2kCpuEthernetPortEntry  

rc2kCpuEthernetPortIfIndex 1.3.6.1.4.1.2272.1.100.2.1.1
IfIndex of the port.
OBJECT-TYPE    
  InterfaceIndex  

rc2kCpuEthernetPortDescr 1.3.6.1.4.1.2272.1.100.2.1.2
Port description
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

rc2kCpuEthernetPortAdminStatus 1.3.6.1.4.1.2272.1.100.2.1.3
Used to configure the admininstrative status of the port.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

rc2kCpuEthernetPortOperStatus 1.3.6.1.4.1.2272.1.100.2.1.4
Used to indicate the administrative status of the port.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

rc2kCpuEthernetPortAddr 1.3.6.1.4.1.2272.1.100.2.1.5
Used to configure the port's IP address
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortMask 1.3.6.1.4.1.2272.1.100.2.1.6
Used to configure the port's net mask
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortGateway 1.3.6.1.4.1.2272.1.100.2.1.7
Used to configure the the IP address of the gateway that should be used to forward IP traffic.
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortNetwork 1.3.6.1.4.1.2272.1.100.2.1.8
Used to configure the network that can be used to remotely manage this device.
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortAutoNegotiate 1.3.6.1.4.1.2272.1.100.2.1.9
Used to configure auto-negotiation on this port.
OBJECT-TYPE    
  TruthValue  

rc2kCpuEthernetPortAdminDuplex 1.3.6.1.4.1.2272.1.100.2.1.10
Used to configure the administrative duplex setting for this port.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

rc2kCpuEthernetPortOperDuplex 1.3.6.1.4.1.2272.1.100.2.1.11
Used to indicate the operational duplex setting for this port.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

rc2kCpuEthernetPortAdminSpeed 1.3.6.1.4.1.2272.1.100.2.1.12
Used to configure the administrative speed setting for this port.
OBJECT-TYPE    
  INTEGER none(0), mbps10(1), mbps100(2)  

rc2kCpuEthernetPortOperSpeed 1.3.6.1.4.1.2272.1.100.2.1.13
Used to indicate the operational duplex setting for this port.
OBJECT-TYPE    
  INTEGER none(0), mbps10(1), mbps100(2)  

rc2kCpuEthernetPortEnableBootp 1.3.6.1.4.1.2272.1.100.2.1.14
Used to enable/disable the Bootp feature on this port.
OBJECT-TYPE    
  TruthValue  

rc2kCpuEthernetPortMgmtMacAddr 1.3.6.1.4.1.2272.1.100.2.1.15
Used to indicate the mac addr for this port.
OBJECT-TYPE    
  MacAddress  

rc2kCpuSerialPortTable 1.3.6.1.4.1.2272.1.100.3
2k CPU Serial Port table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kCpuSerialPortEntry

rc2kCpuSerialPortEntry 1.3.6.1.4.1.2272.1.100.3.1
Entry containing infomation of 2k CPU Serial Port
OBJECT-TYPE    
  Rc2kCpuSerialPortEntry  

rc2kCpuSerialPortIfIndex 1.3.6.1.4.1.2272.1.100.3.1.1
IfIndex for this port.
OBJECT-TYPE    
  InterfaceIndex  

rc2kCpuSerialPortDescr 1.3.6.1.4.1.2272.1.100.3.1.2
Port description.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

rc2kCpuSerialPortMode 1.3.6.1.4.1.2272.1.100.3.1.3
Used to configure the mode this port should operate in.
OBJECT-TYPE    
  INTEGER cli(1), slip(2), ppp(3)  

rc2kCpuSerialPortAdminStatus 1.3.6.1.4.1.2272.1.100.3.1.4
Used to configure the administrative status setting for this port.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

rc2kCpuSerialPortOperStatus 1.3.6.1.4.1.2272.1.100.3.1.5
Used to indicate the operational status setting for this port.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

rc2kCpuSerialPortBaudRate 1.3.6.1.4.1.2272.1.100.3.1.6
Used to configure the baud rate of this port.
OBJECT-TYPE    
  INTEGER baud2400(2400), baud4800(4800), baud9600(9600), baud19200(19200), baud38400(38400), baud57600(57600), baud115200(115200)  

rc2kCpuSerialPortDataBits 1.3.6.1.4.1.2272.1.100.3.1.7
Used to configure the number of data bits, per byte of data, this port should send/receive.
OBJECT-TYPE    
  INTEGER seven(1), eight(2)  

rc2kCpuSerialPortMyAddr 1.3.6.1.4.1.2272.1.100.3.1.8
Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes.
OBJECT-TYPE    
  IpAddress  

rc2kCpuSerialPortPeerAddr 1.3.6.1.4.1.2272.1.100.3.1.9
Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes.
OBJECT-TYPE    
  IpAddress  

rc2kCpuSerialPortSlipMtu 1.3.6.1.4.1.2272.1.100.3.1.10
Used to configure the MTU for this port. Used for slip only.
OBJECT-TYPE    
  INTEGER 0..224  

rc2kCpuSerialPortSlipTxRxCompress 1.3.6.1.4.1.2272.1.100.3.1.11
Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only.
OBJECT-TYPE    
  TruthValue  

rc2kCpuSerialPortSlipRxCompress 1.3.6.1.4.1.2272.1.100.3.1.12
Used to enable/disable compression for receiving packets on this port. Used for slip only.
OBJECT-TYPE    
  TruthValue  

rc2kCpuSerialPortPppConfigFile 1.3.6.1.4.1.2272.1.100.3.1.13
Used to configure the configuration file to use for PPP.
OBJECT-TYPE    
  DisplayString SIZE(256)  

rc2kDevice 1.3.6.1.4.1.2272.1.100.4
OBJECT IDENTIFIER    

rc2kDeviceGlobalTable 1.3.6.1.4.1.2272.1.100.4.1
2k CPU Ethernet Port table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kDeviceGlobalEntry

rc2kDeviceGlobalEntry 1.3.6.1.4.1.2272.1.100.4.1.1
Entry containing infomation of 2k CPU Ethernet Port
OBJECT-TYPE    
  Rc2kDeviceGlobalEntry  

rc2kDeviceGlobalSlot 1.3.6.1.4.1.2272.1.100.4.1.1.1
slot number
OBJECT-TYPE    
  INTEGER 5..6  

rc2kDeviceGlobalFlashBytesUsed 1.3.6.1.4.1.2272.1.100.4.1.1.2
bytes used
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalFlashBytesFree 1.3.6.1.4.1.2272.1.100.4.1.1.3
bytes free
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalFlashNumFiles 1.3.6.1.4.1.2272.1.100.4.1.1.4
# files in flash
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalPcmciaBytesUsed 1.3.6.1.4.1.2272.1.100.4.1.1.5
bytes used
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalPcmciaBytesFree 1.3.6.1.4.1.2272.1.100.4.1.1.6
bytes free
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalPcmciaNumFiles 1.3.6.1.4.1.2272.1.100.4.1.1.7
# files in pcmcia
OBJECT-TYPE    
  INTEGER  

rc2kDeviceGlobalAction 1.3.6.1.4.1.2272.1.100.4.1.1.8
none(1), resetPcmcia(2), ..
OBJECT-TYPE    
  INTEGER none(1), resetPcmcia(2)  

rc2kDeviceGlobalResult 1.3.6.1.4.1.2272.1.100.4.1.1.9
Used to indicate the result of the last action performed on one of the system's device.
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4)  

rc2kDeviceSeparator1 1.3.6.1.4.1.2272.1.100.4.2
This leaf is used to provide a separation between tables. No meaningful information is stored in this variable.
OBJECT-TYPE    
  INTEGER  

rc2kDeviceFlashFileTable 1.3.6.1.4.1.2272.1.100.4.3
2k Flash table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kDeviceFlashFileEntry

rc2kDeviceFlashFileEntry 1.3.6.1.4.1.2272.1.100.4.3.1
Entry containing infomation of 2k CPU Serial Port
OBJECT-TYPE    
  Rc2kDeviceFlashFileEntry  

rc2kDeviceFlashFileSlot 1.3.6.1.4.1.2272.1.100.4.3.1.1
slot number
OBJECT-TYPE    
  INTEGER 5..6  

rc2kDeviceFlashFileName 1.3.6.1.4.1.2272.1.100.4.3.1.2
name of file
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rc2kDeviceFlashFileDate 1.3.6.1.4.1.2272.1.100.4.3.1.3
date
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

rc2kDeviceFlashFileSize 1.3.6.1.4.1.2272.1.100.4.3.1.4
size in bytes
OBJECT-TYPE    
  INTEGER  

rc2kDevicePcmciaPresent 1.3.6.1.4.1.2272.1.100.4.4
pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table.
OBJECT-TYPE    
  TruthValue  

rc2kDevicePcmciaFileTable 1.3.6.1.4.1.2272.1.100.4.5
2k PCMCIA table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kDevicePcmciaFileEntry

rc2kDevicePcmciaFileEntry 1.3.6.1.4.1.2272.1.100.4.5.1
Entry containing infomation of 2k CPU Serial Port
OBJECT-TYPE    
  Rc2kDevicePcmciaFileEntry  

rc2kDevicePcmciaFileSlot 1.3.6.1.4.1.2272.1.100.4.5.1.1
slot number
OBJECT-TYPE    
  INTEGER 5..6  

rc2kDevicePcmciaFileName 1.3.6.1.4.1.2272.1.100.4.5.1.2
name of file
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

rc2kDevicePcmciaFileDate 1.3.6.1.4.1.2272.1.100.4.5.1.3
date
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

rc2kDevicePcmciaFileSize 1.3.6.1.4.1.2272.1.100.4.5.1.4
size in bytes
OBJECT-TYPE    
  INTEGER  

rc2kDeviceSeparator2 1.3.6.1.4.1.2272.1.100.4.6
This leaf is used to provide a separation between tables. No meaningful information is stored in this variable.
OBJECT-TYPE    
  INTEGER  

rc2kBootConfigTable 1.3.6.1.4.1.2272.1.100.5
2k Boot Configuration table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kBootConfigEntry

rc2kBootConfigEntry 1.3.6.1.4.1.2272.1.100.5.1
Entry containing boot configuration information.
OBJECT-TYPE    
  Rc2kBootConfigEntry  

rc2kBootConfigSlot 1.3.6.1.4.1.2272.1.100.5.1.1
slot number, tattoo use 3 as cpu slot, 4 is not valid cpu slot number
OBJECT-TYPE    
  INTEGER 3..6  

rc2kBootConfigLastBootConfigSource 1.3.6.1.4.1.2272.1.100.5.1.2
boot config source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigLastRuntimeImageSource 1.3.6.1.4.1.2272.1.100.5.1.3
runtime image source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigLastRuntimeConfigSource 1.3.6.1.4.1.2272.1.100.5.1.4
runtime config source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigPrimaryImageSource 1.3.6.1.4.1.2272.1.100.5.1.5
image source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigPrimaryConfigSource 1.3.6.1.4.1.2272.1.100.5.1.6
config source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigSecondaryImageSource 1.3.6.1.4.1.2272.1.100.5.1.7
image source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigSecondaryConfigSource 1.3.6.1.4.1.2272.1.100.5.1.8
config source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigTertiaryImageSource 1.3.6.1.4.1.2272.1.100.5.1.9
image source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigTertiaryConfigSource 1.3.6.1.4.1.2272.1.100.5.1.10
config source
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

rc2kBootConfigEnableAutoBoot 1.3.6.1.4.1.2272.1.100.5.1.11
auto boot mode
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableFactoryDefaults 1.3.6.1.4.1.2272.1.100.5.1.12
use factory default
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableDebugMode 1.3.6.1.4.1.2272.1.100.5.1.13
debug mode
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableHwWatchDogTimer 1.3.6.1.4.1.2272.1.100.5.1.14
hw watch dog timer
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableRebootOnError 1.3.6.1.4.1.2272.1.100.5.1.15
reboot on error
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableTelnetServer 1.3.6.1.4.1.2272.1.100.5.1.16
telnet server
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableRloginServer 1.3.6.1.4.1.2272.1.100.5.1.17
rlogin server
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableFtpServer 1.3.6.1.4.1.2272.1.100.5.1.18
ftp server
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigEnableTftpServer 1.3.6.1.4.1.2272.1.100.5.1.19
tftp server
OBJECT-TYPE    
  TruthValue  

rc2kBootConfigSwVersion 1.3.6.1.4.1.2272.1.100.5.1.20
current sw version
OBJECT-TYPE    
  DisplayString  

rc2kBootConfigMulticastConfigProfile 1.3.6.1.4.1.2272.1.100.5.1.21
multicast config
OBJECT-TYPE    
  INTEGER 1..6  

rc2kBootConfigEnableSshServer 1.3.6.1.4.1.2272.1.100.5.1.22
ssh server
OBJECT-TYPE    
  TruthValue  

rc2kCardTable 1.3.6.1.4.1.2272.1.100.6
2k Card table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kCardEntry

rc2kCardEntry 1.3.6.1.4.1.2272.1.100.6.1
Entry containing information of 2k Card
OBJECT-TYPE    
  Rc2kCardEntry  

rc2kCardIndex 1.3.6.1.4.1.2272.1.100.6.1.1
slot number.
OBJECT-TYPE    
  INTEGER 1..10  

rc2kCardFrontType 1.3.6.1.4.1.2272.1.100.6.1.2
Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: +------+-------+-------+-------+------------+------+------+------+ bits : |31-28 | 27-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 | +------+-------+-------+-------+----+-------+------+------+------+ field : | a | c | d | e | f | g | h | +------+-------+-------+-------+----+-------+------+------+------+ a : Family type/Product line 0x0 = 0000 = Reserved 0x1 = 0001 = Monoploy non specific (e.g backplane, psu, fans) 0x2 = 0010 = Boardwalk 0x3 = 0011 = Marvin Gardens 0x4 = 0100 = Pacific 0x5 = 0101 = ParkPlace c : Interface / device type: 0x00 = 00000000 = CPU 0x01 = 00000001 = Switch fabric 0x02 = 00000010 = Copper Ethernet 0x03 = 00000011 = Fiber Ethernet 0x04 = 00000100 = Sonet (Packets) 0x05 = 00000101 = ATM 0x06 = 00000110 = Token Ring 0x07 = 00000111 = RMON 0x08 = 00001000 = BFM (Frame or cells indicated by field 'a' above) 0x09 = 00001001 = PSU 0x0a = 00001010 = Fan Tray 0x0b = 00001011 = Chassis/Backplane d : Maximum speed (highest negotiable speed) 0x0 = 0000 = 10 Mbit 0x1 = 0001 = 100 Mbit 0x2 = 0010 = 1 Gbit 0x3 = 0011 = 10 Gbit 0x4 = 0100 = OC-3 0x5 = 0101 = OC-12 0x6 = 0110 = OC-48 0x7 = 0111 = OC-92 0x8 = 1000 = OC-192 0x9 = 1001 = 4 Mbit (TR) 0xa = 1010 = 16 Mbit (TR) 0xb = 1011 = E3 0xc = 1100 = DS1 0xd = 1101 = DS3 0xe = 1110 = none (no PHY interfaces on board) 0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion) e : 0=non-redundant, 1=redundant f : Card specific info. For Gigabit used as follows: 000=short-haul (SX) 010=long-haul (LX) 100=extra-distance (DX) 101=GBIC For ATM/Sonet used as follows 000 = multi mode 001 = single mode 010 = single or multimode 011 = not applicable (e.g., copper has no mode) For Marvin Gardens, indicates number of MDA slots 000 = none 001 = one option slots 010 = two option slots 011 = three option slots For Power Supplies: 000 = AC PSU 001 = DC PSU g : Chassis type 0x0 = 0000 = work-group (single card switches, etc) 0x1 = 0001 = back-bone (chassis based products) 0x2 = 0010 = MDA (option modules) h : Number of ports (binary representation obmited) (for ACIM/BFM cards, this is number of octapids/blackbirds/dea) 0x00 = no ports (cpus, switch fabrics) 0x01 = 1-port, 0x02 = 2-port, 0x04 = 4-port, 0x06 = 6-port, 0x08 = 8-port, 0x0c = 12-port, 0x10 = 16-port, 0x18 = 24-port, 0x22 = 36-port, 0x30 = 48-port, 0x40 = 64-port.
OBJECT-TYPE    
  INTEGER other(1), rc2kCPU(537788672), rc2k48x100BaseTX(539033904), rc2k24x100BaseTX(539033880), rc2k32x100BaseTX(539033888), rc2k8x1000BaseT(539099400), rc2k16x1000BaseT(539099408), rc2k24x100BaseFX(540082456), rc2k8x1000BaseSXBB(540147976), rc2k16x1000BaseSXBB(540147984), rc2k8x1000BaseLXBB(540156168), rc2k8x1000BaseXDBB(540164360), rc2k4x1000BaseOPM(540168452), rc2k8x1000BaseIC(540168456), rc2k16x1000BaseIC(540168464), rc2k8x1000BaseSXRBB(540180744), rc2k8x1000BaseLXRBB(540188936), rc2k8xOC3(541327624), rc2k2xOC12(541393154), rc2k6xPOS(541401350), rc2k4xATM(542441732), rc2k8xATM(542441736), rc2kRMON(545128704), rc2kMg48x100BaseTX(807469360), rc2kMg32x100BaseTX(807473440), rc2kMg16x100BaseFX(808522000), rc2kMg8x1000BaseTX(808583432), rc2kMg8x1000BaseIC(808603912), rc2kMg48x100BaseTC(817955120), rc2kAlteonWSM4(1899102468)  

rc2kCardFrontDescription 1.3.6.1.4.1.2272.1.100.6.1.3
description
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontAdminStatus 1.3.6.1.4.1.2272.1.100.6.1.4
Used to indicate the administrative status of this card
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

rc2kCardFrontOperStatus 1.3.6.1.4.1.2272.1.100.6.1.5
Used to indicate the operational status of this card.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5)  

rc2kCardFrontSerialNum 1.3.6.1.4.1.2272.1.100.6.1.6
serial number of card
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontHwVersion 1.3.6.1.4.1.2272.1.100.6.1.7
hardware version
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontPartNumber 1.3.6.1.4.1.2272.1.100.6.1.8
part number
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontDateCode 1.3.6.1.4.1.2272.1.100.6.1.9
date code
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontDeviations 1.3.6.1.4.1.2272.1.100.6.1.10
deviations
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardFrontMacAddr 1.3.6.1.4.1.2272.1.100.6.1.11
base mac address
OBJECT-TYPE    
  MacAddress  

rc2kCardBackType 1.3.6.1.4.1.2272.1.100.6.1.12
Refer to rc2kCardFrontType for the encoding scheme
OBJECT-TYPE    
  INTEGER other(1), rc2kBackplane(536969472), rc2kSFM(538837248), rc2kBFM0(546177280), rc2kBFM2(546177282), rc2kBFM3(546177283), rc2kBFM4(1888354564), rc2kBFM6(546177286), rc2kBFM8(546177288), rc2kMGSFM(807272704)  

rc2kCardBackDescription 1.3.6.1.4.1.2272.1.100.6.1.13
description
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardBackSerialNum 1.3.6.1.4.1.2272.1.100.6.1.14
serial number of card
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardBackHwVersion 1.3.6.1.4.1.2272.1.100.6.1.15
hardware version
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardBackPartNumber 1.3.6.1.4.1.2272.1.100.6.1.16
part number
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardBackDateCode 1.3.6.1.4.1.2272.1.100.6.1.17
date code
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardBackDeviations 1.3.6.1.4.1.2272.1.100.6.1.18
deviations
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kCardPCMCIAType 1.3.6.1.4.1.2272.1.100.6.1.19
Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none(1).
OBJECT-TYPE    
  INTEGER none(1), modemCard(2), ethernetCard(3), ataDisk(4)  

rc2kCardPCMCIADescr 1.3.6.1.4.1.2272.1.100.6.1.20
PCMCIA descriptor
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

rc2kCardASICDescr 1.3.6.1.4.1.2272.1.100.6.1.21
ASIC descriptor
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

rc2kCardFrontMasterIO 1.3.6.1.4.1.2272.1.100.6.1.22
Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices.
OBJECT-TYPE    
  TruthValue  

rc2kCopyFile 1.3.6.1.4.1.2272.1.100.7
OBJECT IDENTIFIER    

rc2kCopyFileSource 1.3.6.1.4.1.2272.1.100.7.1
source file
OBJECT-TYPE    
  DisplayString SIZE(0..256)  

rc2kCopyFileDestination 1.3.6.1.4.1.2272.1.100.7.2
dest file
OBJECT-TYPE    
  DisplayString SIZE(0..256)  

rc2kCopyFileAction 1.3.6.1.4.1.2272.1.100.7.3
start or cancell
OBJECT-TYPE    
  INTEGER none(1), start(2)  

rc2kCopyFileResult 1.3.6.1.4.1.2272.1.100.7.4
result
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4), invalidSource(5), invalidDestination(6), outOfMemory(7), outOfSpace(8), fileNotFound(9)  

rc2kQos 1.3.6.1.4.1.2272.1.100.8
OBJECT IDENTIFIER    

rc2kQosQosTable 1.3.6.1.4.1.2272.1.100.8.1
This table is used to define the Quality Of Service(QOS) profiles for the system. The system can support eight different QOS levels. Each QOS level can be individually configured.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosQosEntry

rc2kQosQosEntry 1.3.6.1.4.1.2272.1.100.8.1.1
QOS profile entry.
OBJECT-TYPE    
  Rc2kQosQosEntry  

rc2kQosQosRow 1.3.6.1.4.1.2272.1.100.8.1.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosQosLevel 1.3.6.1.4.1.2272.1.100.8.1.1.2
QOS level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosQosName 1.3.6.1.4.1.2272.1.100.8.1.1.3
Qos level name
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rc2kQosQosAdminWeight 1.3.6.1.4.1.2272.1.100.8.1.1.4
Administrative transmit opportunity percentage
OBJECT-TYPE    
  INTEGER  

rc2kQosQosOperWeight 1.3.6.1.4.1.2272.1.100.8.1.1.5
Operational transmit opportunity percentage
OBJECT-TYPE    
  INTEGER  

rc2kQosOctapidMode 1.3.6.1.4.1.2272.1.100.8.1.1.6
Octapid mode
OBJECT-TYPE    
  INTEGER modeSingle(1), mode100(2)  

rc2kQosQosAdminThreshold 1.3.6.1.4.1.2272.1.100.8.1.1.7
Administrative queue threshold
OBJECT-TYPE    
  INTEGER none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9)  

rc2kQosQosOperThreshold 1.3.6.1.4.1.2272.1.100.8.1.1.8
Operational queue threshold
OBJECT-TYPE    
  INTEGER none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9)  

rc2kQosIngressTagToQosTable 1.3.6.1.4.1.2272.1.100.8.2
This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressTagToQosEntry

rc2kQosIngressTagToQosEntry 1.3.6.1.4.1.2272.1.100.8.2.1
Entry containing infomation of 8021P->Qos mapping
OBJECT-TYPE    
  Rc2kQosIngressTagToQosEntry  

rc2kQosIngressTagToQosRow 1.3.6.1.4.1.2272.1.100.8.2.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosIngressTagToQosInIeee8021P 1.3.6.1.4.1.2272.1.100.8.2.1.2
802.1P
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosIngressTagToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.2.1.3
Qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosIngressDsFieldToQosTable 1.3.6.1.4.1.2272.1.100.8.3
This table is used to specify the DSCP field to QOS (DsField->QOS) mapping on packet ingress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressDsFieldToQosEntry

rc2kQosIngressDsFieldToQosEntry 1.3.6.1.4.1.2272.1.100.8.3.1
Entry containing infomation of DsField->Qos mapping
OBJECT-TYPE    
  Rc2kQosIngressDsFieldToQosEntry  

rc2kQosIngressDsFieldToQosRow 1.3.6.1.4.1.2272.1.100.8.3.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosIngressDsFieldToQosInDsField 1.3.6.1.4.1.2272.1.100.8.3.1.2
diffserv dsField
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosIngressDsFieldToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.3.1.3
qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToTagTable 1.3.6.1.4.1.2272.1.100.8.4
This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToTagEntry

rc2kQosEgressQosToTagEntry 1.3.6.1.4.1.2272.1.100.8.4.1
Entry containing infomation of Qos->Qos mapping
OBJECT-TYPE    
  Rc2kQosEgressQosToTagEntry  

rc2kQosEgressQosToTagRow 1.3.6.1.4.1.2272.1.100.8.4.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToTagQosLevel 1.3.6.1.4.1.2272.1.100.8.4.1.2
qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToTagOutIeee8021P 1.3.6.1.4.1.2272.1.100.8.4.1.3
802.1P
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDsFieldTable 1.3.6.1.4.1.2272.1.100.8.5
This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToDsFieldEntry

rc2kQosEgressQosToDsFieldEntry 1.3.6.1.4.1.2272.1.100.8.5.1
Entry containing infomation of Qos->Qos mapping
OBJECT-TYPE    
  Rc2kQosEgressQosToDsFieldEntry  

rc2kQosEgressQosToDsFieldRow 1.3.6.1.4.1.2272.1.100.8.5.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToDsFieldQosLevel 1.3.6.1.4.1.2272.1.100.8.5.1.2
qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDsFieldOutDsField 1.3.6.1.4.1.2272.1.100.8.5.1.3
diffserv dsField
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosTrafficProfileTable 1.3.6.1.4.1.2272.1.100.8.6
This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not egress the system above a certain rate. These traffic profiles are applied in the 'rcIpFilterTable'.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosTrafficProfileEntry

rc2kQosTrafficProfileEntry 1.3.6.1.4.1.2272.1.100.8.6.1
Entry containing infomation of Qos->Qos mapping
OBJECT-TYPE    
  Rc2kQosTrafficProfileEntry  

rc2kQosTrafficProfileId 1.3.6.1.4.1.2272.1.100.8.6.1.1
Profile id
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosTrafficProfileName 1.3.6.1.4.1.2272.1.100.8.6.1.2
Profile name
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

rc2kQosTrafficProfileEnable 1.3.6.1.4.1.2272.1.100.8.6.1.3
Enable this entry
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileTranslateDscpEnable 1.3.6.1.4.1.2272.1.100.8.6.1.4
Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfileDscp'. Packets that fall outside the traffic profile will get translated to 'rc2kQosTrafficProfileOutProfileDscp'. If disabled, no translation is performed.
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileInProfileDscp 1.3.6.1.4.1.2272.1.100.8.6.1.5
Used to specify the DSCP value for 'good' packets.
OBJECT-TYPE    
  DisplayString SIZE(6)  

rc2kQosTrafficProfileOutProfileDscp 1.3.6.1.4.1.2272.1.100.8.6.1.6
Used to specify the DSCP value for 'violation' packets.
OBJECT-TYPE    
  DisplayString SIZE(6)  

rc2kQosTrafficProfileDiscardEnable 1.3.6.1.4.1.2272.1.100.8.6.1.7
Used to specify whether packets that fall outside the traffic profile should be discarded.
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileAverageRate 1.3.6.1.4.1.2272.1.100.8.6.1.8
Average rate in packets per second.
OBJECT-TYPE    
  INTEGER  

rc2kQosTrafficProfilePeakRate 1.3.6.1.4.1.2272.1.100.8.6.1.9
Peak rate in packets per second.
OBJECT-TYPE    
  INTEGER  

rc2kQosTrafficProfileRowStatus 1.3.6.1.4.1.2272.1.100.8.6.1.10
Used to create/delete entries.
OBJECT-TYPE    
  RowStatus  

rc2kQosIngressDscpToQosTable 1.3.6.1.4.1.2272.1.100.8.7
This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressDscpToQosEntry

rc2kQosIngressDscpToQosEntry 1.3.6.1.4.1.2272.1.100.8.7.1
Entry containing information of Dscp->Qos mapping
OBJECT-TYPE    
  Rc2kQosIngressDscpToQosEntry  

rc2kQosIngressDscpToQosRow 1.3.6.1.4.1.2272.1.100.8.7.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosIngressDscpToQosInDscp 1.3.6.1.4.1.2272.1.100.8.7.1.2
A 6-bit value used to define the Differentiated Service Code Point(DSCP).
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosIngressDscpToQosInDscpBinaryFormat 1.3.6.1.4.1.2272.1.100.8.7.1.3
The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order).
OBJECT-TYPE    
  DisplayString SIZE(6)  

rc2kQosIngressDscpToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.7.1.4
qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDscpTable 1.3.6.1.4.1.2272.1.100.8.8
This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToDscpEntry

rc2kQosEgressQosToDscpEntry 1.3.6.1.4.1.2272.1.100.8.8.1
Entry containing infomation of Qos->Qos mapping
OBJECT-TYPE    
  Rc2kQosEgressQosToDscpEntry  

rc2kQosEgressQosToDscpRow 1.3.6.1.4.1.2272.1.100.8.8.1.1
Used to uniquely identify a row in this table.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToDscpQosLevel 1.3.6.1.4.1.2272.1.100.8.8.1.2
qos level
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDscpOutDscp 1.3.6.1.4.1.2272.1.100.8.8.1.3
A 6-bit value used to define the Differentiated Service Code Point(DSCP).
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosEgressQosToDscpOutDscpBinaryFormat 1.3.6.1.4.1.2272.1.100.8.8.1.4
The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order).
OBJECT-TYPE    
  DisplayString SIZE(6)  

rc2kAtm 1.3.6.1.4.1.2272.1.100.9
OBJECT IDENTIFIER    

rc2kAtmGlobal 1.3.6.1.4.1.2272.1.100.9.1
OBJECT IDENTIFIER    

rc2kAtmPortTable 1.3.6.1.4.1.2272.1.100.9.2
ATM port table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kAtmPortEntry

rc2kAtmPortEntry 1.3.6.1.4.1.2272.1.100.9.2.1
Entry containing infomation of ATM port
OBJECT-TYPE    
  Rc2kAtmPortEntry  

rc2kAtmPortIfIndex 1.3.6.1.4.1.2272.1.100.9.2.1.1
port number
OBJECT-TYPE    
  InterfaceIndex  

rc2kAtmPortNumVpiBits 1.3.6.1.4.1.2272.1.100.9.2.1.2
# of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object.
OBJECT-TYPE    
  INTEGER 1..8  

rc2kAtmPortNumVciBits 1.3.6.1.4.1.2272.1.100.9.2.1.3
# of vci bits
OBJECT-TYPE    
  INTEGER 1..16  

rc2kAtmPortMediaType 1.3.6.1.4.1.2272.1.100.9.2.1.4
media type
OBJECT-TYPE    
  INTEGER smf(1), mmf(2), ds3(3)  

rc2kAtmPortScrambleEnable 1.3.6.1.4.1.2272.1.100.9.2.1.5
enable scramble
OBJECT-TYPE    
  TruthValue  

rc2kAtmPortFramingMode 1.3.6.1.4.1.2272.1.100.9.2.1.6
port framing mode
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

rc2kAtmPortClockSource 1.3.6.1.4.1.2272.1.100.9.2.1.7
clock source
OBJECT-TYPE    
  INTEGER loopTimed(1), freeRunning(2)  

rc2kAtmPortLineSpeed 1.3.6.1.4.1.2272.1.100.9.2.1.8
line speed
OBJECT-TYPE    
  INTEGER oc3c(1), oc12c(2), ds3(3)  

rc2kAtmPortLoopBackMode 1.3.6.1.4.1.2272.1.100.9.2.1.9
loop back mode
OBJECT-TYPE    
  INTEGER off(1), internal(2), external(3)  

rc2kAtmPortMacAddress 1.3.6.1.4.1.2272.1.100.9.2.1.10
XLR assigned MAC addr
OBJECT-TYPE    
  MacAddress  

rc2kAtmPvcTable 1.3.6.1.4.1.2272.1.100.9.3
ATM Pvc table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kAtmPvcEntry

rc2kAtmPvcEntry 1.3.6.1.4.1.2272.1.100.9.3.1
Entry containing infomation of ATM Pvc
OBJECT-TYPE    
  Rc2kAtmPvcEntry  

rc2kAtmPvcIfIndex 1.3.6.1.4.1.2272.1.100.9.3.1.1
port number
OBJECT-TYPE    
  InterfaceIndex  

rc2kAtmPvcVpi 1.3.6.1.4.1.2272.1.100.9.3.1.2
vpi of this pvc
OBJECT-TYPE    
  INTEGER 0..255  

rc2kAtmPvcVci 1.3.6.1.4.1.2272.1.100.9.3.1.3
vci of this pvc
OBJECT-TYPE    
  INTEGER 0..65535  

rc2kAtmPvcPvcId 1.3.6.1.4.1.2272.1.100.9.3.1.4
internal pvc id
OBJECT-TYPE    
  INTEGER  

rc2kAtmPvcName 1.3.6.1.4.1.2272.1.100.9.3.1.5
name of pvc
OBJECT-TYPE    
  DisplayString  

rc2kAtmPvcEncapsulation 1.3.6.1.4.1.2272.1.100.9.3.1.6
encapsulation
OBJECT-TYPE    
  INTEGER null(1), llcSnap(2)  

rc2kAtmPvcServiceType 1.3.6.1.4.1.2272.1.100.9.3.1.7
service type
OBJECT-TYPE    
  INTEGER ubr(1), vbr(2)  

rc2kAtmPvcPeakCellRate 1.3.6.1.4.1.2272.1.100.9.3.1.8
Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783.
OBJECT-TYPE    
  INTEGER 86..733490  

rc2kAtmPvcSustainedCellRate 1.3.6.1.4.1.2272.1.100.9.3.1.9
Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783.
OBJECT-TYPE    
  INTEGER 86..733490  

rc2kAtmPvcMaxBurstSize 1.3.6.1.4.1.2272.1.100.9.3.1.10
max burst size
OBJECT-TYPE    
  INTEGER 2..255  

rc2kAtmPvcRowStatus 1.3.6.1.4.1.2272.1.100.9.3.1.11
row status
OBJECT-TYPE    
  RowStatus  

rc2kAtmPvcOamLbMgmtEnable 1.3.6.1.4.1.2272.1.100.9.3.1.12
Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically
OBJECT-TYPE    
  TruthValue  

rc2kAtmPvcOamLbSendFrequency 1.3.6.1.4.1.2272.1.100.9.3.1.13
Number of seconds between transmitting OAM loopback request
OBJECT-TYPE    
  INTEGER 1..255  

rc2kAtmPvcOamLbRetryFrequency 1.3.6.1.4.1.2272.1.100.9.3.1.14
Number of seconds between retry
OBJECT-TYPE    
  INTEGER 1..255  

rc2kAtmPvcOamLbUpCount 1.3.6.1.4.1.2272.1.100.9.3.1.15
Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up
OBJECT-TYPE    
  INTEGER 1..255  

rc2kAtmPvcOamLbDownCount 1.3.6.1.4.1.2272.1.100.9.3.1.16
Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down.
OBJECT-TYPE    
  INTEGER 1..255  

rc2kAtmPvcOamTrapEnable 1.3.6.1.4.1.2272.1.100.9.3.1.17
Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down.
OBJECT-TYPE    
  TruthValue  

rc2kAtmPvcOamVcStatus 1.3.6.1.4.1.2272.1.100.9.3.1.18
Indicate the status of PVC link. Not Managed--VC is not being managed by OAM. Down Verify --An OAM loopback failed. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccessful retries, the VC goes to the down state (see definition of rc2kAtmPvcOamLoopbackDownCount). Down --VC has not received responses to by end-to-end F5 OAM loopback cells. Up Verify -- An OAM loopback was successful. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really up. After up-count successive and successful loopback retries, the VC goes to the Up state (see definition of rc2kAtmPvcOamLoopbackUpCount). Up - End-to-end loopbacks are successful.
OBJECT-TYPE    
  INTEGER notManaged(1), downVerify(2), down(3), upVerify(4), up(5)  

rc2kAtmPvcOamLbRequestSent 1.3.6.1.4.1.2272.1.100.9.3.1.19
Number of OAM loopback request sent
OBJECT-TYPE    
  Counter  

rc2kAtmPvcOamLbReplySent 1.3.6.1.4.1.2272.1.100.9.3.1.20
Number of OAM loopback reply sent
OBJECT-TYPE    
  Counter  

rc2kAtmPvcOamLbReplyReceived 1.3.6.1.4.1.2272.1.100.9.3.1.21
Number of OAM loopback reply received
OBJECT-TYPE    
  Counter  

rc2kAtm1483ElanTable 1.3.6.1.4.1.2272.1.100.9.5
ATM 1483Elan table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kAtm1483ElanEntry

rc2kAtm1483ElanEntry 1.3.6.1.4.1.2272.1.100.9.5.1
Entry containing infomation of ATM 1483Elan
OBJECT-TYPE    
  Rc2kAtm1483ElanEntry  

rc2kAtm1483ElanIfIndex 1.3.6.1.4.1.2272.1.100.9.5.1.1
port number
OBJECT-TYPE    
  InterfaceIndex  

rc2kAtm1483ElanElanId 1.3.6.1.4.1.2272.1.100.9.5.1.2
Elan Id
OBJECT-TYPE    
  INTEGER  

rc2kAtm1483ElanNumPvcIds 1.3.6.1.4.1.2272.1.100.9.5.1.3
# pvc-ids in list
OBJECT-TYPE    
  INTEGER 0..64  

rc2kAtm1483ElanPvcIds 1.3.6.1.4.1.2272.1.100.9.5.1.4
list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids.
OBJECT-TYPE    
  IdList SIZE(256)  

rc2kAtm1483ElanVlanId 1.3.6.1.4.1.2272.1.100.9.5.1.5
vlan tag for this 1483
OBJECT-TYPE    
  INTEGER  

rc2kAtm1483ElanRowStatus 1.3.6.1.4.1.2272.1.100.9.5.1.6
row status
OBJECT-TYPE    
  RowStatus  

rc2kAtm1483ElanConnectType 1.3.6.1.4.1.2272.1.100.9.5.1.7
connection type
OBJECT-TYPE    
  INTEGER bridged(1), ip(2), ipx(3)  

rc2kAtm1483ElanVlanMacAddress 1.3.6.1.4.1.2272.1.100.9.5.1.8
mac for vlan
OBJECT-TYPE    
  MacAddress  

rc2kAtm1483ElanDummyMacAddress 1.3.6.1.4.1.2272.1.100.9.5.1.9
dummy mac for the other router
OBJECT-TYPE    
  MacAddress  

rc2kAtm1483ElanLocalIpAddress 1.3.6.1.4.1.2272.1.100.9.5.1.10
local ip, if ConnectType is ip(2)
OBJECT-TYPE    
  IpAddress  

rc2kAtm1483ElanRemoteIpAddress 1.3.6.1.4.1.2272.1.100.9.5.1.11
remote ip, if ConnectType is ip(2)
OBJECT-TYPE    
  IpAddress  

rc2kAtm1483ElanInArpSendEnable 1.3.6.1.4.1.2272.1.100.9.5.1.12
enable arp sending on the port, if ConnectType is ip(2)
OBJECT-TYPE    
  TruthValue  

rc2kAtm1483ElanInArpSendInterval 1.3.6.1.4.1.2272.1.100.9.5.1.13
interval of arp sending on the port, if ConnectType is ip(2)
OBJECT-TYPE    
  INTEGER 0..60  

rc2kAtm1483ElanIpxVlanEncapMethod 1.3.6.1.4.1.2272.1.100.9.5.1.14
vlan encapsulation method, if ConnectType is ipx(3)
OBJECT-TYPE    
  INTEGER llc(1), snap(2), ether-ii(3), raw(4)  

rc2kAtm1483ElanIpxNetworkNum 1.3.6.1.4.1.2272.1.100.9.5.1.15
network number, if ConnectType is ipx(3)
OBJECT-TYPE    
  INTEGER 0..2147483647  

rc2kAtm1483ElanStgId 1.3.6.1.4.1.2272.1.100.9.5.1.16
An identifier used to identify a STG in the device, only in bridge mode
OBJECT-TYPE    
  INTEGER  

rc2kAtm1483ElanrcStgTaggedBpduVlanId 1.3.6.1.4.1.2272.1.100.9.5.1.17
The VLAN ID to be used for tagging BPDUs, only in bridge mode.
OBJECT-TYPE    
  INTEGER  

rc2kAtmSioCardConfigTable 1.3.6.1.4.1.2272.1.100.9.8
2kAtm Sio Card Config Table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kAtmSioCardConfigEntry

rc2kAtmSioCardConfigEntry 1.3.6.1.4.1.2272.1.100.9.8.1
Entry containing infomation of 2kAtm Sio Card Config.
OBJECT-TYPE    
  Rc2kAtmSioCardConfigEntry  

rc2kAtmSioCardConfigSlotIndex 1.3.6.1.4.1.2272.1.100.9.8.1.1
slot Index.
OBJECT-TYPE    
  INTEGER  

rc2kAtmSioCardConfigAction 1.3.6.1.4.1.2272.1.100.9.8.1.2
OBJECT-TYPE    
  INTEGER other(0), reset(1)  

rc2kAtmSioCardConfigTraceMode 1.3.6.1.4.1.2272.1.100.9.8.1.3
OBJECT-TYPE    
  INTEGER other(0), traceOn(1)  

rc2kAtmSioCardConfigImageFileName 1.3.6.1.4.1.2272.1.100.9.8.1.4
ATM Image file name.
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardTable 1.3.6.1.4.1.2272.1.100.10
Mda card table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kMdaCardEntry

rc2kMdaCardEntry 1.3.6.1.4.1.2272.1.100.10.1
Entry containing infomation of Mda card
OBJECT-TYPE    
  Rc2kMdaCardEntry  

rc2kMdaCardSlotNum 1.3.6.1.4.1.2272.1.100.10.1.1
Slot number
OBJECT-TYPE    
  INTEGER 1..10  

rc2kMdaCardMdaNum 1.3.6.1.4.1.2272.1.100.10.1.2
MDA number within slot. MDAs are numbered from left to right.
OBJECT-TYPE    
  INTEGER 1..4  

rc2kMdaCardType 1.3.6.1.4.1.2272.1.100.10.1.3
Refer to rc2kCardFrontType for the encoding scheme
OBJECT-TYPE    
  INTEGER other(1), rc2k4x100BaseTX(807469572), rc2k2x100BaseFX(808518146), rc2k4x100BaseFX(808518148), rc2k1x1000BaseSXBB(808583681), rc2k1x1000BaseSXRBB(808616449), rc2k1x1000BaseLXBB(808591873), rc2k1x1000BaseLXRBB(808624641), rc2k4xOc3cBaseSM(542380548), rc2k4xOc3cBaseMM(542376452), rc2k4xOc3cBaseCOPPER(542388740), rc2k1x0c12cBaseSM(542446081), rc2k1x0c12cBaseMM(542441985), rc2k2xDs3(542970370), rc2k2xE3(542839298), rc2k2xOc3PosBaseMMF(541327874), rc2k2xOc3PosBaseSMF(541331970), rc2k1xOc12PosBaseMMF(541393409), rc2k1xOc12PosBaseSMF(541397505)  

rc2kMdaCardDescription 1.3.6.1.4.1.2272.1.100.10.1.4
description of mda card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardAdminStatus 1.3.6.1.4.1.2272.1.100.10.1.5
administration status of mda card
OBJECT-TYPE    
  INTEGER up(0), down(1), testing(2), unknown(3)  

rc2kMdaCardOperStatus 1.3.6.1.4.1.2272.1.100.10.1.6
operation status of mda card.
OBJECT-TYPE    
  INTEGER up(0), down(1), testing(2), unknown(3)  

rc2kMdaCardSerialNum 1.3.6.1.4.1.2272.1.100.10.1.7
serial number of mad card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardHwVersion 1.3.6.1.4.1.2272.1.100.10.1.8
hardware version of mda card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardPartNumber 1.3.6.1.4.1.2272.1.100.10.1.9
part number of mda card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardDateCode 1.3.6.1.4.1.2272.1.100.10.1.10
date code of mda card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardDeviations 1.3.6.1.4.1.2272.1.100.10.1.11
hardware deviation infomation of mda card
OBJECT-TYPE    
  DisplayString  

rc2kMdaCardMacAddr 1.3.6.1.4.1.2272.1.100.10.1.12
base mac address of mda card
OBJECT-TYPE    
  MacAddress  

rc2kMdaCardNumPorts 1.3.6.1.4.1.2272.1.100.10.1.13
number of ports on mda card
OBJECT-TYPE    
  INTEGER  

rc2kMdaCardFirstIfIndex 1.3.6.1.4.1.2272.1.100.10.1.14
first ifindex number on mda card
OBJECT-TYPE    
  InterfaceIndex  

rc2kMdaCardLastIfIndex 1.3.6.1.4.1.2272.1.100.10.1.15
last ifindex number on mda card
OBJECT-TYPE    
  InterfaceIndex  

rc2kCpuEthernetPortRouteTable 1.3.6.1.4.1.2272.1.100.11
2k CPU Ethernet Port Route table
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kCpuEthernetPortRouteEntry

rc2kCpuEthernetPortRouteEntry 1.3.6.1.4.1.2272.1.100.11.1
Entry containing infomation of 2k CPU Ethernet Port
OBJECT-TYPE    
  Rc2kCpuEthernetPortRouteEntry  

rc2kCpuEthernetPortRouteNetwork 1.3.6.1.4.1.2272.1.100.11.1.1
Used to configure the network that can be used to remotely manage this device.
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortRouteGateway 1.3.6.1.4.1.2272.1.100.11.1.2
Used to configure the the IP address of the gateway that should be used to forward IP traffic.
OBJECT-TYPE    
  IpAddress  

rc2kCpuEthernetPortRouteRowStatus 1.3.6.1.4.1.2272.1.100.11.1.3
row status
OBJECT-TYPE    
  RowStatus  

rcA1100 1.3.6.1.4.1.2272.2
OBJECT IDENTIFIER    

rcA1250 1.3.6.1.4.1.2272.6
OBJECT IDENTIFIER    

rcA1150 1.3.6.1.4.1.2272.7
OBJECT IDENTIFIER    

rcA1200 1.3.6.1.4.1.2272.8
OBJECT IDENTIFIER    

rcA1050 1.3.6.1.4.1.2272.9
OBJECT IDENTIFIER    

rcA740 1.3.6.1.4.1.2272.20
OBJECT IDENTIFIER    

rcA750 1.3.6.1.4.1.2272.21
OBJECT IDENTIFIER    

rcA790 1.3.6.1.4.1.2272.22
OBJECT IDENTIFIER    

rcA750S 1.3.6.1.4.1.2272.23
OBJECT IDENTIFIER    

rcA8610 1.3.6.1.4.1.2272.30
OBJECT IDENTIFIER    

rcA8606 1.3.6.1.4.1.2272.31
OBJECT IDENTIFIER    

rcA8110 1.3.6.1.4.1.2272.32
OBJECT IDENTIFIER    

rcA8106 1.3.6.1.4.1.2272.33
OBJECT IDENTIFIER    

rcA8603 1.3.6.1.4.1.2272.34
OBJECT IDENTIFIER    

rcA8103 1.3.6.1.4.1.2272.35
OBJECT IDENTIFIER    

rcA8110co 1.3.6.1.4.1.2272.36
OBJECT IDENTIFIER    

rcA8610co 1.3.6.1.4.1.2272.37
OBJECT IDENTIFIER    

rcA8003 1.3.6.1.4.1.2272.280887555
OBJECT IDENTIFIER    

rcA8006 1.3.6.1.4.1.2272.280887558
OBJECT IDENTIFIER    

rcA8010 1.3.6.1.4.1.2272.280887562
OBJECT IDENTIFIER    

rcA8010co 1.3.6.1.4.1.2272.1623064842
OBJECT IDENTIFIER    

Defined Objects

BridgeId  
OCTET STRING SIZE(8)    

Timeout  
INTEGER    

EnableValue  
INTEGER enable(1), disable(2)    

InterfaceIndex  
INTEGER    

PortSet  
OCTET STRING SIZE(88)    

IdList  
OCTET STRING    

RcSysTrapRecvEntry  
SEQUENCE    
  IpAddress as rcSysTrapRecvAddress  
  INTEGER as rcSysTrapRecvVersion  
  DisplayString as rcSysTrapRecvCommunity  
  IpAddress as rcSysTrapRecvSrcAddress  
  RowStatus as rcSysTrapRecvRowStatus  

RcSysAccesspolicyEntry  
SEQUENCE    
  INTEGER as rcSysAccessPolicyId  
  DisplayString as rcSysAccessPolicyName  
  TruthValue as rcSysAccessPolicyPolicyEnable  
  INTEGER as rcSysAccessPolicyMode  
  INTEGER as rcSysAccessPolicyService  
  INTEGER as rcSysAccessPolicyPrecedence  
  IpAddress as rcSysAccessPolicyNetAddr  
  IpAddress as rcSysAccessPolicyNetMask  
  IpAddress as rcSysAccessPolicyTrustedHostAddr  
  DisplayString as rcSysAccessPolicyTrustedHostUserName  
  INTEGER as rcSysAccessPolicyAccessLevel  
  TruthValue as rcSysAccessPolicyLog  
  Counter as rcSysAccessPolicyUsage  
  RowStatus as rcSysAccessPolicyRowStatus  

RcVlanEntry  
SEQUENCE    
  INTEGER as rcVlanId  
  DisplayString as rcVlanName  
  INTEGER as rcVlanColor  
  TruthValue as rcVlanHighPriority  
  TruthValue as rcVlanRoutingEnable  
  InterfaceIndex as rcVlanIfIndex  
  INTEGER as rcVlanAction  
  INTEGER as rcVlanResult  
  INTEGER as rcVlanStgId  
  INTEGER as rcVlanType  
  PortSet as rcVlanPortMembers  
  PortSet as rcVlanActiveMembers  
  PortSet as rcVlanStaticMembers  
  PortSet as rcVlanNotAllowToJoin  
  INTEGER as rcVlanProtocolId  
  IpAddress as rcVlanSubnetAddr  
  IpAddress as rcVlanSubnetMask  
  INTEGER as rcVlanAgingTime  
  MacAddress as rcVlanMacAddress  
  RowStatus as rcVlanRowStatus  
  TruthValue as rcVlanIgmpSnoopEnable  
  TruthValue as rcVlanIgmpSnoopReportProxyEnable  
  INTEGER as rcVlanIgmpSnoopRobustness  
  INTEGER as rcVlanIgmpSnoopQueryInterval  
  PortSet as rcVlanIgmpSnoopMRouterPorts  
  INTEGER as rcVlanUserDefinedPid  
  PortSet as rcVlanIgmpSnoopActiveMRouterPorts  
  INTEGER as rcVlanProtocolIds  
  IpAddress as rcVlanIgmpSnoopActiveQuerier  
  INTEGER as rcVlanIgmpSnoopMRouterExpiration  
  InterfaceIndex as rcVlanIgmpSnoopQuerierPort  
  INTEGER as rcVlanUserPriority  
  INTEGER as rcVlanQosLevel  
  INTEGER as rcVlanTosValue  

RcVlanPortEntry  
SEQUENCE    
  INTEGER as rcVlanPortIndex  
  INTEGER as rcVlanPortNumVlanIds  
  IdList as rcVlanPortVlanIds  
  INTEGER as rcVlanPortType  
  TruthValue as rcVlanPortDiscardTaggedFrames  
  TruthValue as rcVlanPortDiscardUntaggedFrames  
  INTEGER as rcVlanPortDefaultVlanId  
  TruthValue as rcVlanPortPerformTagging  

RcVlanMacEntry  
SEQUENCE    
  INTEGER as rcVlanMacVlanId  
  MacAddress as rcVlanMacAddr  
  RowStatus as rcVlanMacRowStatus  

RcVlanIgmpSnoopEntry  
SEQUENCE    
  INTEGER as rcVlanIgmpSnoopVlanId  
  IpAddress as rcVlanIgmpSnoopIpAddress  
  InterfaceIndex as rcVlanIgmpSnoopIfIndex  
  IpAddress as rcVlanIgmpSnoopMember  
  INTEGER as rcVlanIgmpSnoopExpiration  
  INTEGER as rcVlanIgmpSnoopType  

RcVlanIgmpSnoopStaticEntry  
SEQUENCE    
  INTEGER as rcVlanIgmpSnoopStaticVlanId  
  IpAddress as rcVlanIgmpSnoopStaticIpAddress  
  PortSet as rcVlanIgmpSnoopStaticMemberPorts  
  RowStatus as rcVlanIgmpSnoopStaticRowStatus  
  PortSet as rcVlanIgmpSnoopStaticNotAllowedToJoin  

RcVlanIgmpSnoopAccessEntry  
SEQUENCE    
  INTEGER as rcVlanIgmpSnoopAccessVlanId  
  IpAddress as rcVlanIgmpSnoopAccessGrpAddr  
  IpAddress as rcVlanIgmpSnoopAccessHostAddr  
  IpAddress as rcVlanIgmpSnoopAccessHostMask  
  INTEGER as rcVlanIgmpSnoopAccessMode  
  RowStatus as rcVlanIgmpSnoopAccessRowStatus  

RcVlanIgmpSnoopSenderEntry  
SEQUENCE    
  INTEGER as rcVlanIgmpSnoopSenderVlanId  
  IpAddress as rcVlanIgmpSnoopSenderIpAddress  
  InterfaceIndex as rcVlanIgmpSnoopSenderIfIndex  
  IpAddress as rcVlanIgmpSnoopSenderMember  
  INTEGER as rcVlanIgmpSnoopSenderAction  

RcChasFanEntry  
SEQUENCE    
  INTEGER as rcChasFanId  
  INTEGER as rcChasFanOperStatus  
  Gauge32 as rcChasFanAmbientTemperature  

RcChasPowerSupplyEntry  
SEQUENCE    
  INTEGER as rcChasPowerSupplyId  
  INTEGER as rcChasPowerSupplyOperStatus  

RcChasPowerSupplyDetailEntry  
SEQUENCE    
  INTEGER as rcChasPowerSupplyDetailId  
  INTEGER as rcChasPowerSupplyDetailType  
  DisplayString as rcChasPowerSupplyDetailSerialNumber  
  DisplayString as rcChasPowerSupplyDetailHardwareRevision  
  DisplayString as rcChasPowerSupplyDetailPartNumber  
  DisplayString as rcChasPowerSupplyDetailDescription  

RcCardEntry  
SEQUENCE    
  INTEGER as rcCardIndex  
  INTEGER as rcCardType  
  DisplayString as rcCardSerialNumber  
  DisplayString as rcCardHardwareRevision  
  INTEGER as rcCardAdminStatus  
  INTEGER as rcCardOperStatus  
  INTEGER as rcCardPCMCIAType  
  DisplayString as rcCardPartNumber  

RcPortEntry  
SEQUENCE    
  InterfaceIndex as rcPortIndex  
  INTEGER as rcPortType  
  INTEGER as rcPortConnectorType  
  TruthValue as rcPortPerformRouting  
  TruthValue as rcPortHighPriority  
  INTEGER as rcPortAction  
  INTEGER as rcPortResult  
  INTEGER as rcPortPrimaryConnector  
  INTEGER as rcPortActiveConnector  
  INTEGER as rcPortBackupConnectorStatus  
  TruthValue as rcPortAutoNegotiate  
  INTEGER as rcPortAdminDuplex  
  INTEGER as rcPortOperDuplex  
  INTEGER as rcPortAdminSpeed  
  INTEGER as rcPortOperSpeed  
  INTEGER as rcPortMltId  
  TruthValue as rcPortLocked  
  TruthValue as rcPortAutoNegotiationSupported  
  TruthValue as rcPortSingleRoutablePort  
  TruthValue as rcPortUnknownMacDiscard  
  Counter as rcPortNumStateTransition  
  TruthValue as rcPortAllowOversizeFrame  
  INTEGER as rcPortUserPriority  
  INTEGER as rcPortQosLevel  
  TruthValue as rcPortDiffServEnable  
  INTEGER as rcPortDiffServType  
  TruthValue as rcPortDiffServIeee8021POverrideEnable  
  DisplayString as rcPortVendorDescr  
  DisplayString as rcPortName SIZE(0..20)  
  INTEGER as rcPortOctapidId  

RcAgentEntry  
SEQUENCE    
  INTEGER as rcAgentId  
  INTEGER as rcAgentSlot  
  IpAddress as rcAgentIpAddr  

RcIpConfEntry  
SEQUENCE    
  InterfaceIndex as rcIpConfIfIndex  
  TruthValue as rcIpConfAdvertDefRte  
  TruthValue as rcIpConfAcceptDefRte  
  RowStatus as rcIpConfRowStatus  
  TruthValue as rcIpConfRipEnable  
  TruthValue as rcIpConfOspfEnable  
  TruthValue as rcIpConfIgmpEnable  
  TruthValue as rcIpConfAddrAssigned  
  TruthValue as rcIpConfDhcpEnable  
  TruthValue as rcIpConfTriggeredUpdateEnable  
  TruthValue as rcIpConfAutoAggrerateEnable  
  TruthValue as rcIpConfGenerateDefaultRoute  
  TruthValue as rcIpConfAdvertiseWhenDown  
  TruthValue as rcIpConfDirectBroadcastEnable  
  DisplayString as rcIpConfRipInPolicy  
  DisplayString as rcIpConfRipOutPolicy  
  INTEGER as rcIpConfOspfIfType  
  INTEGER as rcIpConfRipCost  

RcIpConfOspfEntry  
SEQUENCE    
  InterfaceIndex as rcIpConfOspfIfIndex  
  INTEGER as rcIpConfOspfRtrPriority  
  INTEGER as rcIpConfOspfMetric  
  DisplayString as rcIpConfOspfAuthKey  
  RowStatus as rcIpConfOspfRowStatus  
  INTEGER as rcIpConfOspfHelloInterval  
  INTEGER as rcIpConfOspfRtrDeadInterval  
  IpAddress as rcIpConfOspfIfAreaId  
  INTEGER as rcIpConfOspfAuthType  
  INTEGER as rcIpConfOspfPollInterval  

RcIpConfOspfAreaEntry  
SEQUENCE    
  IpAddress as rcIpConfOspfAreaId  
  TruthValue as rcIpConfOspfAreaImportSummary  
  INTEGER as rcIpConfOspfAreaActiveIfCount  

RcIpConfV2Entry  
SEQUENCE    
  InterfaceIndex as rcIpConfV2Index  
  IpAddress as rcIpConfV2Addr  
  RowStatus as rcIpConfV2RowStatus  
  TruthValue as rcIpConfV2AdvertDefRte  
  TruthValue as rcIpConfV2AcceptDefRte  
  TruthValue as rcIpConfV2RipEnable  
  TruthValue as rcIpConfV2OspfEnable  
  TruthValue as rcIpConfV2IgmpEnable  
  TruthValue as rcIpConfV2AddrAssigned  
  TruthValue as rcIpConfV2TriggeredUpdateEnable  
  TruthValue as rcIpConfV2RipAutoAggrerateEnable  
  TruthValue as rcIpConfV2RipGenerateDefaultRoute  
  TruthValue as rcIpConfV2AdvertiseWhenDown  

RcIpConfOspfV2Entry  
SEQUENCE    
  InterfaceIndex as rcIpConfOspfV2IfIndex  
  IpAddress as rcIpConfOspfV2IpAddr  
  INTEGER as rcIpConfOspfV2RtrPriority  
  INTEGER as rcIpConfOspfV2Metric  
  DisplayString as rcIpConfOspfV2AuthKey  
  RowStatus as rcIpConfOspfV2RowStatus  
  INTEGER as rcIpConfOspfV2HelloInterval  
  INTEGER as rcIpConfOspfV2RtrDeadInterval  
  IpAddress as rcIpConfOspfV2IfAreaId  
  INTEGER as rcIpConfOspfV2AuthType  

RcIpConfOspfAreaAggregateEntry  
SEQUENCE    
  IpAddress as rcIpConfOspfAreaAggregateAreaID  
  INTEGER as rcIpConfOspfAreaAggregateLsdbType  
  IpAddress as rcIpConfOspfAreaAggregateNet  
  IpAddress as rcIpConfOspfAreaAggregateMask  
  INTEGER as rcIpConfOspfAreaAggregateAdvertiseMetric 0..65535  

RcIpAddrEntry  
SEQUENCE    
  InterfaceIndex as rcIpAdEntIfIndex  
  IpAddress as rcIpAdEntAddr  
  IpAddress as rcIpAdEntNetMask  
  INTEGER as rcIpAdEntBcastAddrFormat  
  INTEGER as rcIpAdEntReasmMaxSize 0..65535  
  RowStatus as rcIpAdEntRowStatus  
  INTEGER as rcIpAdEntVlanId 1..4094  
  TruthValue as rcIpAdEntBrouterPort  
  INTEGER as rcIpAdEntMacOffset  

RcIpFlowEntry  
SEQUENCE    
  IpAddress as rcIpFlowSrcIpAddress  
  INTEGER as rcIpFlowSrcIpPort  
  IpAddress as rcIpFlowDstIpAddress  
  INTEGER as rcIpFlowDstIpPort  
  INTEGER as rcIpFlowProtocol  
  RowStatus as rcIpFlowRowStatus  

RcIpConfIgmpEntry  
SEQUENCE    
  INTEGER as rcIpConfIgmpIfIndex  
  INTEGER as rcIpConfIgmpQueryInterval  
  INTEGER as rcIpConfIgmpVersion  
  INTEGER as rcIpConfIgmpQueryMaxResponseTime  
  INTEGER as rcIpConfIgmpQuerierPresentTimeout  
  TruthValue as rcIpConfIgmpLeaveEnabled  
  RowStatus as rcIpConfIgmpRowStatus  
  INTEGER as rcIpConfIgmpRobustness  
  INTEGER as rcIpConfIgmpLastMemberQueryInterval  
  TruthValue as rcIpConfIgmpSnoopEnable  
  TruthValue as rcIpConfIgmpProxySnoopEnable  

RcIgmpGroupEntry  
SEQUENCE    
  IpAddress as rcIgmpGroupIpAddress  
  IpAddress as rcIgmpGroupMembers  
  INTEGER as rcIgmpGroupInPort  
  INTEGER as rcIgmpGroupExpiration  

RcIpRouteEntry  
SEQUENCE    
  IpAddress as rcIpRouteDest  
  IpAddress as rcIpRouteMask  
  IpAddress as rcIpRouteNextHop  
  INTEGER as rcIpRouteMetric  
  InterfaceIndex as rcIpRouteIfIndex  
  INTEGER as rcIpRouteType  
  INTEGER as rcIpRouteProto  
  INTEGER as rcIpRouteAge  
  RowStatus as rcIpRouteRowStatus  
  INTEGER as rcIpRoutePref  
  INTEGER as rcIpRouteAltSequence  
  INTEGER as rcIpRoutePathType  

RcIpConfDhcpEntry  
SEQUENCE    
  InterfaceIndex as rcIpConfDhcpIfIndex  
  INTEGER as rcIpConfDhcpMaxHop  
  INTEGER as rcIpConfDhcpMinSec  
  INTEGER as rcIpConfDhcpMode  
  RowStatus as rcIpConfDhcpRowStatus  
  Counter as rcIpConfDhcpNumRequests  
  Counter as rcIpConfDhcpNumReplies  
  TruthValue as rcIpConfDhcpAlwaysBroadcast  

RcIpDhcpForwardEntry  
SEQUENCE    
  IpAddress as rcIpDhcpForwardAgentAddr  
  IpAddress as rcIpDhcpForwardServerAddr  
  TruthValue as rcIpDhcpForwardEnable  
  INTEGER as rcIpDhcpForwardMode  
  RowStatus as rcIpDhcpForwardRowStatus  

RcIpFilterEntry  
SEQUENCE    
  INTEGER as rcIpFilterType  
  IpAddress as rcIpFilterDstAddr  
  IpAddress as rcIpFilterDstMask  
  IpAddress as rcIpFilterSrcAddr  
  IpAddress as rcIpFilterSrcMask  
  INTEGER as rcIpFilterId 1..4096  
  DisplayString as rcIpFilterName SIZE(0..15)  
  INTEGER as rcIpFilterProtocolType  
  INTEGER as rcIpFilterSrcPort 0..65535  
  INTEGER as rcIpFilterSrcOption  
  INTEGER as rcIpFilterDstPort 0..65535  
  INTEGER as rcIpFilterDstOption  
  TruthValue as rcIpFilterCopyToCpu  
  TruthValue as rcIpFilterMirror  
  TruthValue as rcIpFilterHighPriority  
  TruthValue as rcIpFilterTcpConnect  
  INTEGER as rcIpFilterIeeeVlanPriority  
  TruthValue as rcIpFilterUsePktLimit  
  INTEGER as rcIpFilterPktLimit  
  RowStatus as rcIpFilterRowStatus  
  INTEGER as rcIpFilterMode  
  INTEGER as rcIpFilterIpTosRule  
  TruthValue as rcIpFilterStopOnMatch  
  TruthValue as rcIpFilterDiffServMatchIeee8021PEnable  
  INTEGER as rcIpFilterDiffServMatchIeee8021P 0..7  
  TruthValue as rcIpFilterDiffServMatchDscpEnable  
  DisplayString as rcIpFilterDiffServMatchDscp SIZE(6)  
  DisplayString as rcIpFilterDiffServMatchDscpReserved SIZE(2)  
  TruthValue as rcIpFilterDiffServModifyIeee8021PEnable  
  INTEGER as rcIpFilterDiffServModifyIeee8021P 0..7  
  TruthValue as rcIpFilterDiffServModifyDscpEnable  
  DisplayString as rcIpFilterDiffServModifyDscp SIZE(6)  
  DisplayString as rcIpFilterDiffServModifyDscpReserved SIZE(2)  
  INTEGER as rcIpFilterDiffServTrafficProfileId 0..64  
  TruthValue as rcIpFilterMatchIcmpRequest  
  TruthValue as rcIpFilterMatchIpFragment  
  TruthValue as rcIpFilterStatisticEnable  
  Counter32 as rcIpFilterInOctets  
  Counter32 as rcIpFilterInPackets  
  Counter32 as rcIpFilterRateLimitDiscardPackets  
  IpAddress as rcIpFilterNextHopForwardIpAddr  
  TruthValue as rcIpFilterNextHopUnreachableDropEnable  
  INTEGER as rcIpFilterProtocolTypeUsrDefined  

RcIpFilterGlobalListEntry  
SEQUENCE    
  INTEGER as rcIpFilterGlobalListId 1..100  
  DisplayString as rcIpFilterGlobalListName SIZE(0..15)  
  INTEGER as rcIpFilterGlobalListFilterIdListSize 0..8  
  IdList as rcIpFilterGlobalListFilterIdList SIZE(16)  
  RowStatus as rcIpFilterGlobalListRowStatus  
  PortSet as rcIpFilterGlobalListMemberPorts  

RcIpFilterBaseListEntry  
SEQUENCE    
  INTEGER as rcIpFilterBaseListId 300..1000  
  DisplayString as rcIpFilterBaseListName SIZE(0..15)  
  INTEGER as rcIpFilterBaseListFilterIdListSize 0..128  
  IdList as rcIpFilterBaseListFilterIdList SIZE(256)  
  RowStatus as rcIpFilterBaseListRowStatus  
  PortSet as rcIpFilterBaseListMemberPorts  

RcIpFilterPortEntry  
SEQUENCE    
  InterfaceIndex as rcIpFilterPortIfIndex  
  INTEGER as rcIpFilterPortFilterListSize 0..128  
  OCTET STRING as rcIpFilterPortFilterList SIZE(256)  
  INTEGER as rcIpFilterPortMode  
  TruthValue as rcIpFilterPortEnable  
  RowStatus as rcIpFilterPortRowStatus  
  INTEGER as rcIpFilterPortDefaultAction  
  INTEGER as rcIpFilterPortNumGlobalFilters  
  INTEGER as rcIpFilterPortNumBaseFilters  

RcIpPolicyAddrEntry  
SEQUENCE    
  IpAddress as rcIpPolicyAddrIpAddr  
  INTEGER as rcIpPolicyAddrId  
  INTEGER as rcIpPolicyAddrAddrListIdListSize 0..128  
  OCTET STRING as rcIpPolicyAddrAddrListIdList SIZE(256)  
  RowStatus as rcIpPolicyAddrRowStatus  

RcIpPolicyNetEntry  
SEQUENCE    
  IpAddress as rcIpPolicyNetAddr  
  IpAddress as rcIpPolicyNetMask  
  INTEGER as rcIpPolicyNetId  
  INTEGER as rcIpPolicyNetNetListIdListSize 0..128  
  OCTET STRING as rcIpPolicyNetNetListIdList SIZE(256)  
  RowStatus as rcIpPolicyNetRowStatus  

RcIpPolicyAddrListEntry  
SEQUENCE    
  INTEGER as rcIpPolicyAddrListId 1..1000  
  DisplayString as rcIpPolicyAddrListName SIZE(0..15)  
  INTEGER as rcIpPolicyAddrListIdListSize 0..128  
  OCTET STRING as rcIpPolicyAddrListIdList SIZE(256)  
  INTEGER as rcIpPolicyAddrListPolicyIdListSize 0..128  
  OCTET STRING as rcIpPolicyAddrListPolicyIdList SIZE(256)  
  RowStatus as rcIpPolicyAddrListRowStatus  

RcIpPolicyRipAnnounceEntry  
SEQUENCE    
  INTEGER as rcIpPolicyRipAnnounceId 1..1000  
  DisplayString as rcIpPolicyRipAnnounceName SIZE(0..15)  
  TruthValue as rcIpPolicyRipAnnounceEnable  
  INTEGER as rcIpPolicyRipAnnounceExactNetListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceRangeNetListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceRipGatewayListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceRipInterfaceListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceOspfRouterListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceAnnounceInterfaceListId 0..1000  
  INTEGER as rcIpPolicyRipAnnouncePrecedence  
  INTEGER as rcIpPolicyRipAnnounceRouteSource  
  INTEGER as rcIpPolicyRipAnnounceAdvertiseNetListId 0..1000  
  INTEGER as rcIpPolicyRipAnnounceAction  
  INTEGER as rcIpPolicyRipAnnounceOspfRouteType  
  INTEGER as rcIpPolicyRipAnnounceRipMetric 0..15  
  RowStatus as rcIpPolicyRipAnnounceRowStatus  

RcIpPolicyOspfAnnounceEntry  
SEQUENCE    
  INTEGER as rcIpPolicyOspfAnnounceId 2001..3000  
  DisplayString as rcIpPolicyOspfAnnounceName SIZE(0..15)  
  TruthValue as rcIpPolicyOspfAnnounceEnable  
  INTEGER as rcIpPolicyOspfAnnounceExactNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAnnounceRangeNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAnnounceRipGatewayListId 0..1000  
  INTEGER as rcIpPolicyOspfAnnounceRipInterfaceListId 0..1000  
  INTEGER as rcIpPolicyOspfAnnouncePrecedence  
  INTEGER as rcIpPolicyOspfAnnounceRouteSource  
  INTEGER as rcIpPolicyOspfAnnounceAdvertiseNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAnnounceAction  
  INTEGER as rcIpPolicyOspfAnnounceExtMetricType  
  INTEGER as rcIpPolicyOspfAnnounceExtMetric 0..65535  
  RowStatus as rcIpPolicyOspfAnnounceRowStatus  

RcIpPolicyRipAcceptEntry  
SEQUENCE    
  INTEGER as rcIpPolicyRipAcceptId 4001..5000  
  DisplayString as rcIpPolicyRipAcceptName SIZE(0..15)  
  TruthValue as rcIpPolicyRipAcceptEnable  
  INTEGER as rcIpPolicyRipAcceptExactNetListId 0..1000  
  INTEGER as rcIpPolicyRipAcceptRangeNetListId 0..1000  
  INTEGER as rcIpPolicyRipAcceptRipGatewayListId 0..1000  
  INTEGER as rcIpPolicyRipAcceptRipInterfaceListId 0..1000  
  INTEGER as rcIpPolicyRipAcceptPrecedence  
  INTEGER as rcIpPolicyRipAcceptAction  
  INTEGER as rcIpPolicyRipAcceptInjectNetListId 0..1000  
  IpAddress as rcIpPolicyRipAcceptApplyMask  
  RowStatus as rcIpPolicyRipAcceptRowStatus  

RcIpPolicyOspfAcceptEntry  
SEQUENCE    
  INTEGER as rcIpPolicyOspfAcceptId 6001..7000  
  DisplayString as rcIpPolicyOspfAcceptName SIZE(0..15)  
  TruthValue as rcIpPolicyOspfAcceptEnable  
  INTEGER as rcIpPolicyOspfAcceptExactNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAcceptRangeNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAcceptPrecedence  
  INTEGER as rcIpPolicyOspfAcceptAction  
  INTEGER as rcIpPolicyOspfAcceptInjectNetListId 0..1000  
  INTEGER as rcIpPolicyOspfAcceptExtType  
  RowStatus as rcIpPolicyOspfAcceptRowStatus  

RcIpPolicyNetListEntry  
SEQUENCE    
  INTEGER as rcIpPolicyNetListId 1..1000  
  DisplayString as rcIpPolicyNetListName SIZE(0..15)  
  INTEGER as rcIpPolicyNetListIdListSize 0..128  
  OCTET STRING as rcIpPolicyNetListIdList SIZE(256)  
  INTEGER as rcIpPolicyNetListPolicyIdListSize 0..128  
  OCTET STRING as rcIpPolicyNetListPolicyIdList SIZE(256)  
  RowStatus as rcIpPolicyNetListRowStatus  

RcIpDvmrpTableEntry  
SEQUENCE    
  InterfaceIndex as rcIpDvmrpTableIfIndex  
  TruthValue as rcIpDvmrpTableEnable  
  INTEGER as rcIpDvmrpTableMetric  
  EnableValue as rcIpDvmrpTableAdvSelf  
  IpAddress as rcIpDvmrpTableLocalAddr  

RcIpUdpProtocolEntry  
SEQUENCE    
  INTEGER as rcIpUdpProtocolPortNumber  
  DisplayString as rcIpUdpProtocolName  
  RowStatus as rcIpUdpProtocolRowStatus  

RcIpUdpPortFwdEntry  
SEQUENCE    
  INTEGER as rcIpUdpPortFwdDestPort  
  IpAddress as rcIpUdpPortFwdDestAddr  
  INTEGER as rcIpUdpPortFwdId  
  INTEGER as rcIpUdpPortFwdFwdListIdListSize 0..32  
  IdList as rcIpUdpPortFwdFwdListIdList SIZE(16)  
  Counter as rcIpUdpPortFwdNumFwdPackets  
  Counter as rcIpUdpPortFwdNumDropPacketsTtlExpired  
  Counter as rcIpUdpPortFwdNumDropPacketsDestUnreach  
  RowStatus as rcIpUdpPortFwdRowStatus  

RcIpUdpPortFwdListEntry  
SEQUENCE    
  INTEGER as rcIpUdpPortFwdListId 1..1000  
  DisplayString as rcIpUdpPortFwdListName SIZE(0..15)  
  INTEGER as rcIpUdpPortFwdListFwdIdListSize 0..48  
  OCTET STRING as rcIpUdpPortFwdListFwdIdList SIZE(96)  
  RowStatus as rcIpUdpPortFwdListRowStatus  

RcIpUdpConfBroadcastIntfEntry  
SEQUENCE    
  IpAddress as rcIpUdpConfBroadcastIntfLocalIfAddr  
  INTEGER as rcIpUdpConfBroadcastIntfUdpPortFwdListId 0..100  
  INTEGER as rcIpUdpConfBroadcastIntfMaxTtl 1..16  
  Counter as rcIpUdpConfBroadcastIntfNumRxPkts  
  Counter as rcIpUdpConfBroadcastIntfNumFwdPkts  
  Counter as rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired  
  Counter as rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach  
  Counter as rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort  
  RowStatus as rcIpUdpConfBroadcastIntfRowStatus  

RcIpStaticRouteEntry  
SEQUENCE    
  IpAddress as rcIpStaticRouteDest  
  IpAddress as rcIpStaticRouteMask  
  IpAddress as rcIpStaticRouteNextHop  
  INTEGER as rcIpStaticRouteMetric 1..'FFFF'h  
  InterfaceIndex as rcIpStaticRouteIfIndex  
  INTEGER as rcIpStaticRoutePreference 1..255  
  TruthValue as rcIpStaticRouteEnable  
  INTEGER as rcIpStaticRouteStatus  
  RowStatus as rcIpStaticRouteRowStatus  
  TruthValue as rcIpStaticRouteLocalNextHop  

RcIpPimEntry  
SEQUENCE    
  InterfaceIndex as rcIpPimIfIndex  
  TruthValue as rcIpPimEnable  
  INTEGER as rcIpPimMode  
  INTEGER as rcIpPimHelloInterval  
  INTEGER as rcIpPimJoinPruneInterval  
  INTEGER as rcIpPimCBSRPreference  

RcIpPimInterfaceEntry  
SEQUENCE    
  InterfaceIndex as rcIpPimInterfaceIfIndex  
  INTEGER as rcIpPimInterfaceOperState  

RcIpMulticastArpEntry  
SEQUENCE    
  INTEGER as rcIpMulticastArpVlanId  
  MacAddress as rcIpMulticastArpMacAddress  
  IpAddress as rcIpMulticastArpIpAddress  
  PortSet as rcIpMulticastArpPorts  
  INTEGER as rcIpMulticastArpNumMltIds  
  IdList as rcIpMulticastArpMltIds  
  RowStatus as rcIpMulticastArpRowStatus  

RcIpMulticastEntry  
SEQUENCE    
  InterfaceIndex as rcIpMulticastIfIndex  
  IpAddress as rcIpMulticastMulticastIp  

RcIpRipInterfaceEntry  
SEQUENCE    
  IpAddress as rcIpRipInterfaceAddress  
  InterfaceIndex as rcIpRipInterfaceIfIndex  
  EnableValue as rcIpRipInterfaceRipEnable  
  TruthValue as rcIpRipInterfaceAccDefRte  
  TruthValue as rcIpRipInterfaceAdvDefRte  
  TruthValue as rcIpRipInterfaceAutoAggregate  
  INTEGER as rcIpRipInterfaceCost  
  TruthValue as rcIpRipInterfaceListen  
  TruthValue as rcIpRipInterfacePoison  
  TruthValue as rcIpRipInterfaceSupply  
  TruthValue as rcIpRipInterfaceTriggeredUpdate  
  DisplayString as rcIpRipInterfaceInPolicy  
  DisplayString as rcIpRipInterfaceOutPolicy  

RcIpMulticastTimedPruneEntry  
SEQUENCE    
  IpAddress as rcIpMulticastTimedPruneGroupAddress  
  IpAddress as rcIpMulticastTimedPruneSourceAddress  
  IpAddress as rcIpMulticastTimedPruneSrcSubnetMask  
  INTEGER as rcIpMulticastTimedPruneAgingTimer  
  INTEGER as rcIpMulticastTimedPruneTimeLeft  
  TimeTicks as rcIpMulticastTimedPruneLastActivity  
  RowStatus as rcIpMulticastTimedPruneRowStatus  

RcIpMrouteHwEntry  
SEQUENCE    
  IpAddress as rcIpMrouteHwGroupAddress  
  IpAddress as rcIpMrouteHwSubnet  
  INTEGER as rcIpMrouteHwInvlan  
  TruthValue as rcIpMrouteHwPruned  
  INTEGER as rcIpMrouteHwIndex  

RcIpMrouteHwPrunesEntry  
SEQUENCE    
  IpAddress as rcIpMrouteHwPrunesGroupAddress  
  IpAddress as rcIpMrouteHwPrunesSubnet  
  INTEGER as rcIpMrouteHwPrunesInvlan  
  IpAddress as rcIpMrouteHwPrunesNeighbor  
  INTEGER as rcIpMrouteHwPrunesTimer  

RcIpMrouteHwSourcesEntry  
SEQUENCE    
  IpAddress as rcIpMrouteHwSourcesGroupAddress  
  IpAddress as rcIpMrouteHwSourcesSubnet  
  INTEGER as rcIpMrouteHwSourcesInvlan  
  IpAddress as rcIpMrouteHwSourcesAddress  
  PortSet as rcIpMrouteHwSourcesIngressPort  

RcIpMrouteHwEgressVlansEntry  
SEQUENCE    
  IpAddress as rcIpMrouteHwEgressVlansGroupAddress  
  IpAddress as rcIpMrouteHwEgressVlansSubnet  
  INTEGER as rcIpMrouteHwEgressVlansInvlan  
  INTEGER as rcIpMrouteHwEgressVlansId  
  PortSet as rcIpMrouteHwEgressVlansPorts  
  INTEGER as rcIpMrouteHwEgressVlansIndex  

RcIpAsPathAccessListEntry  
SEQUENCE    
  INTEGER as rcIpAsPathAccessListId  
  INTEGER as rcIpAsPathAccessListMemberId  
  INTEGER as rcIpAsPathAccessListMode  
  DisplayString as rcIpAsPathAccessListAsRegularExpression  
  RowStatus as rcIpAsPathAccessListRowStatus  

RcIpCommunityAccessListEntry  
SEQUENCE    
  INTEGER as rcIpCommunityAccessListId  
  INTEGER as rcIpCommunityAccessListMemberId  
  INTEGER as rcIpCommunityAccessListMode  
  DisplayString as rcIpCommunityAccessListCommunity  
  RowStatus as rcIpCommunityAccessListRowStatus  

RcIpAccessListEntry  
SEQUENCE    
  INTEGER as rcIpAccessListId  
  INTEGER as rcIpAccessListMode  
  IpAddress as rcIpAccessListNetwork  
  IpAddress as rcIpAccessListNetworkMask  
  DisplayString as rcIpAccessListName  
  RowStatus as rcIpAccessListRowStatus  

RcIpExtendedAccessListEntry  
SEQUENCE    
  INTEGER as rcIpExtendedAccessListId  
  INTEGER as rcIpExtendedAccessListMode  
  IpAddress as rcIpExtendedAccessListNetwork  
  IpAddress as rcIpExtendedAccessListNetworkWildCard  
  IpAddress as rcIpExtendedAccessListNetworkMask  
  IpAddress as rcIpExtendedAccessListNetworkMaskWildCard  
  DisplayString as rcIpExtendedAccessListName  
  RowStatus as rcIpExtendedAccessListRowStatus  

RcIpPrefixListEntry  
SEQUENCE    
  INTEGER as rcIpPrefixListId  
  IpAddress as rcIpPrefixListPrefix  
  INTEGER as rcIpPrefixListPrefixMaskLen  
  INTEGER as rcIpPrefixListMaskLenFrom  
  INTEGER as rcIpPrefixListMaskLenUpto  
  DisplayString as rcIpPrefixListName  
  RowStatus as rcIpPrefixListRowStatus  

RcIpRoutePolicyEntry  
SEQUENCE    
  INTEGER as rcIpRoutePolicyId  
  INTEGER as rcIpRoutePolicySequenceNumber  
  DisplayString as rcIpRoutePolicyName  
  TruthValue as rcIpRoutePolicyEnable  
  INTEGER as rcIpRoutePolicyMode  
  INTEGER as rcIpRoutePolicyMatchProtocol  
  DisplayString as rcIpRoutePolicyMatchAsPath  
  DisplayString as rcIpRoutePolicyMatchCommunity  
  EnableValue as rcIpRoutePolicyMatchCommunityExact  
  DisplayString as rcIpRoutePolicyMatchNetwork  
  DisplayString as rcIpRoutePolicyMatchIpRouteSource  
  DisplayString as rcIpRoutePolicyMatchNextHop  
  DisplayString as rcIpRoutePolicyMatchInterface  
  INTEGER as rcIpRoutePolicyMatchRouteType  
  INTEGER as rcIpRoutePolicyMatchMetric  
  DisplayString as rcIpRoutePolicyMatchTag  
  INTEGER as rcIpRoutePolicySetRoutePreference  
  DisplayString as rcIpRoutePolicySetAsPath  
  INTEGER as rcIpRoutePolicySetAsPathMode  
  EnableValue as rcIpRoutePolicySetAutomaticTag  
  DisplayString as rcIpRoutePolicySetCommunityNumber  
  INTEGER as rcIpRoutePolicySetCommunityMode  
  INTEGER as rcIpRoutePolicySetMetricTypeInternal  
  INTEGER as rcIpRoutePolicySetMetric  
  INTEGER as rcIpRoutePolicySetMetricType  
  IpAddress as rcIpRoutePolicySetNextHop  
  INTEGER as rcIpRoutePolicySetOrigin  
  INTEGER as rcIpRoutePolicySetLocalPref  
  INTEGER as rcIpRoutePolicySetOriginEgpAs  
  INTEGER as rcIpRoutePolicySetTag  
  INTEGER as rcIpRoutePolicySetWeight  
  DisplayString as rcIpRoutePolicySetInjectNetList  
  RowStatus as rcIpRoutePolicyRowStatus  
  IpAddress as rcIpRoutePolicySetMask  
  EnableValue as rcIpRoutePolicyNssaPbit  

RcIpRedistributeEntry  
SEQUENCE    
  INTEGER as rcIpRedistributeProtocol  
  INTEGER as rcIpRedistributeRouteSource  
  EnableValue as rcIpRedistributeEnable  
  INTEGER as rcIpRedistributeMetric  
  INTEGER as rcIpRedistributeMetricType  
  INTEGER as rcIpRedistributeMatchRouteType  
  INTEGER as rcIpRedistributeSetTag  
  INTEGER as rcIpRedistributeSubnets  
  DisplayString as rcIpRedistributeRoutePolicy  
  INTEGER as rcIpRedistributeASNumber  
  INTEGER as rcIpRedistributeWeight  
  INTEGER as rcIpRedistributeDefaultOriginate  
  RowStatus as rcIpRedistributeRowStatus  

RcIpOspfInFilterEntry  
SEQUENCE    
  IpAddress as rcIpOspfInFilterAdvertisingRtr  
  EnableValue as rcIpOspfInFilterEnable  
  INTEGER as rcIpOspfInFilterMetricType  
  DisplayString as rcIpOspfInFilterPolicyName  
  RowStatus as rcIpOspfInFilterRowStatus  

RcIpRoutePrefEntry  
SEQUENCE    
  INTEGER as rcIpRoutePrefProtocol  
  INTEGER as rcIpRoutePrefDefault  
  INTEGER as rcIpRoutePrefConfigured  

RcArpExtEntry  
SEQUENCE    
  InterfaceIndex as rcArpExtEntIfIndex  
  INTEGER as rcArpExtEntDoProxy  
  INTEGER as rcArpExtEntDoResp  

RcArpExtV2Entry  
SEQUENCE    
  InterfaceIndex as rcArpExtV2EntIfIndex  
  IpAddress as rcArpExtV2EntIpIfAddr  
  INTEGER as rcArpExtV2EntDoProxy  
  INTEGER as rcArpExtV2EntDoResp  

RcRipExtEntry  
SEQUENCE    
  InterfaceIndex as rcRipExtEntIfIndex  
  INTEGER as rcRipExtEntTalk  
  INTEGER as rcRipExtEntListen  
  INTEGER as rcRipExtEntPoison  

RcRipExtV2Entry  
SEQUENCE    
  InterfaceIndex as rcRipExtV2EntIfIndex  
  IpAddress as rcRipExtV2EntIpIfAddr  
  INTEGER as rcRipExtV2EntTalk  
  INTEGER as rcRipExtV2EntListen  
  INTEGER as rcRipExtV2EntPoison  

RcTestEntry  
SEQUENCE    
  InterfaceIndex as rcTestExtIfIndex  
  INTEGER as rcTestExtPassCount  
  INTEGER as rcTestExtFailCount  

RcStatEntry  
SEQUENCE    
  InterfaceIndex as rcStatPortIndex  
  Counter as rcStatFrameTooShorts  
  Counter as rcStatBridgeInUnicastFrames  
  Counter as rcStatBridgeInMulticastFrames  
  Counter as rcStatBridgeInBroadcastFrames  
  Counter as rcStatBridgeInDiscards  
  Counter as rcStatBridgeOutUnicastFrames  
  Counter as rcStatBridgeOutMulticastFrames  
  Counter as rcStatBridgeOutBroadcastFrames  
  Counter as rcStatRouteInUnicastFrames  
  Counter as rcStatRouteInMulticastFrames  
  Counter as rcStatRouteInDiscards  
  Counter as rcStatRouteOutUnicastFrames  
  Counter as rcStatRouteOutMulticastFrames  
  Counter as rcStatStgForwardTransitions  
  Counter as rcStatStgInConfigBpdus  
  Counter as rcStatStgInTcnBpdus  
  Counter as rcStatStgInBadBpdus  
  Counter as rcStatStgOutConfigBpdus  
  Counter as rcStatStgOutTcnBpdus  
  Counter as rcStatBridgeOutFrames  

RcStatGigEntry  
SEQUENCE    
  InterfaceIndex as rcStatGigPortIndex  
  Counter as rcStatGigLinkFailures  
  Counter as rcStatGigPacketErrors  
  Counter as rcStatGigCarrierErrors  
  Counter as rcStatGigLinkInactiveErrors  
  Counter as rcStatGigInFlowCtrlPkts  
  Counter as rcStatGigOutFlowCtrlPkts  

RcStatOspfIfEntry  
SEQUENCE    
  InterfaceIndex as rcStatOspfIfIndex  
  Counter as rcStatOspfIfRxHellos  
  Counter as rcStatOspfIfRxDBDescrs  
  Counter as rcStatOspfIfRxLSUpdates  
  Counter as rcStatOspfIfRxLSReqs  
  Counter as rcStatOspfIfRxLSAcks  
  Counter as rcStatOspfIfTxHellos  
  Counter as rcStatOspfIfTxDBDescrs  
  Counter as rcStatOspfIfTxLSUpdates  
  Counter as rcStatOspfIfTxLSReqs  
  Counter as rcStatOspfIfTxLSAcks  
  Counter as rcStatOspfIfVersionMismatches  
  Counter as rcStatOspfIfAreaMismatches  
  Counter as rcStatOspfIfAuthTypeMismatches  
  Counter as rcStatOspfIfAuthFailures  
  Counter as rcStatOspfIfNetMaskMismatches  
  Counter as rcStatOspfIfHelloIntervalMismatches  
  Counter as rcStatOspfIfDeadIntervalMismatches  
  Counter as rcStatOspfIfOptionMismatches  

RcStatMltIfExtnEntry  
SEQUENCE    
  INTEGER as rcStatMltIfExtnMltId  
  Counter32 as rcStatMltIfExtnIfInMulticastPkts  
  Counter32 as rcStatMltIfExtnIfInBroadcastPkts  
  Counter32 as rcStatMltIfExtnIfOutMulticastPkts  
  Counter32 as rcStatMltIfExtnIfOutBroadcastPkts  
  Counter64 as rcStatMltIfExtnIfHCInOctets  
  Counter64 as rcStatMltIfExtnIfHCInUcastPkts  
  Counter64 as rcStatMltIfExtnIfHCInMulticastPkt  
  Counter64 as rcStatMltIfExtnIfHCInBroadcastPkt  
  Counter64 as rcStatMltIfExtnIfHCOutOctets  
  Counter64 as rcStatMltIfExtnIfHCOutUcastPkts  
  Counter64 as rcStatMltIfExtnIfHCOutMulticast  
  Counter64 as rcStatMltIfExtnIfHCOutBroadcast  

RcStatMltEtherEntry  
SEQUENCE    
  INTEGER as rcStatMltEtherMltId  
  Counter as rcStatMltEtherAlignmentErrors  
  Counter as rcStatMltEtherFCSErrors  
  Counter as rcStatMltEtherSingleCollFrames  
  Counter as rcStatMltEtherMultipleCollFrames  
  Counter as rcStatMltEtherSQETestError  
  Counter as rcStatMltEtherDeferredTransmiss  
  Counter as rcStatMltEtherLateCollisions  
  Counter as rcStatMltEtherExcessiveCollis  
  Counter as rcStatMltEtherIMacTransmitError  
  Counter as rcStatMltEtherCarrierSenseError  
  Counter as rcStatMltEtherFrameTooLong  
  Counter as rcStatMltEtherIMacReceiveError  

RcStatMltIpEntry  
SEQUENCE    
  INTEGER as rcStatMltIpMltId  
  Counter as rcStatMltIpInReceives  
  Counter as rcStatMltIpInHdrErrors  
  Counter as rcStatMltIpInAddrErrors  
  Counter as rcStatMltIpForwDatagrams  
  Counter as rcStatMltIpInUnknownProtos  
  Counter as rcStatMltIpInDiscards  
  Counter as rcStatMltIpInDelivers  
  Counter as rcStatMltIpOutRequest  
  Counter as rcStatMltIpOutDiscards  
  Counter as rcStatMltIpOutNoRoutes  
  Counter as rcStatMltIpReasmReqds  
  Counter as rcStatMltIpReasmOKs  
  Counter as rcStatMltIpReasmFails  
  Counter as rcStatMltIpFragOKs  
  Counter as rcStatMltIpFragFails  
  Counter as rcStatMltIpFragCreates  
  Counter as rcStatMltIpRoutingDiscards  

RcStatOspfIfV2Entry  
SEQUENCE    
  InterfaceIndex as rcStatOspfIfV2Index  
  IpAddress as rcStatOspfIfV2Addr  
  Counter as rcStatOspfIfV2RxHellos  
  Counter as rcStatOspfIfV2RxDBDescrs  
  Counter as rcStatOspfIfV2RxLSUpdates  
  Counter as rcStatOspfIfV2RxLSReqs  
  Counter as rcStatOspfIfV2RxLSAcks  
  Counter as rcStatOspfIfV2TxHellos  
  Counter as rcStatOspfIfV2TxDBDescrs  
  Counter as rcStatOspfIfV2TxLSUpdates  
  Counter as rcStatOspfIfV2TxLSReqs  
  Counter as rcStatOspfIfV2TxLSAcks  
  Counter as rcStatOspfIfV2VersionMismatches  
  Counter as rcStatOspfIfV2AreaMismatches  
  Counter as rcStatOspfIfV2AuthTypeMismatches  
  Counter as rcStatOspfIfV2AuthFailures  
  Counter as rcStatOspfIfV2NetMaskMismatches  
  Counter as rcStatOspfIfV2HelloIntervalMismatches  
  Counter as rcStatOspfIfV2DeadIntervalMismatches  
  Counter as rcStatOspfIfV2OptionMismatches  

RcStatPosControlEntry  
SEQUENCE    
  InterfaceIndex as rcStatPosControlPortIndex  
  Counter as rcStatPosControlInErrors  
  Counter as rcStatPosControlInUnknownProtos  
  Counter as rcStatPosControlOutErrors  
  Counter64 as rcStatPosControlHCInOctets  
  Counter64 as rcStatPosControlHCInUcastPkts  
  Counter64 as rcStatPosControlHCInMulticastPkts  
  Counter64 as rcStatPosControlHCInBroadcastPkts  
  Counter64 as rcStatPosControlHCInDiscards  
  Counter64 as rcStatPosControlHCOutOctets  
  Counter64 as rcStatPosControlHCOutUcastPkts  
  Counter64 as rcStatPosControlHCOutMulticastPkts  
  Counter64 as rcStatPosControlHCOutBroadcastPkts  
  Counter64 as rcStatPosControlHCOutDiscards  

RcStgEntry  
SEQUENCE    
  INTEGER as rcStgId  
  MacAddress as rcStgTaggedBpduAddress  
  INTEGER as rcStgTaggedBpduVlanId  
  MacAddress as rcStgBridgeAddress  
  INTEGER as rcStgNumPorts  
  INTEGER as rcStgProtocolSpecification  
  INTEGER as rcStgPriority  
  TimeTicks as rcStgTimeSinceTopologyChange  
  Counter as rcStgTopChanges  
  BridgeId as rcStgDesignatedRoot  
  INTEGER as rcStgRootCost  
  INTEGER as rcStgRootPort  
  Timeout as rcStgMaxAge  
  Timeout as rcStgHelloTime  
  INTEGER as rcStgHoldTime  
  Timeout as rcStgForwardDelay  
  Timeout as rcStgBridgeMaxAge  
  Timeout as rcStgBridgeHelloTime  
  Timeout as rcStgBridgeForwardDelay  
  TruthValue as rcStgEnableStp  
  TruthValue as rcStgStpTrapEnable  
  OCTET STRING as rcStgPortMembers  
  RowStatus as rcStgRowStatus  
  OCTET STRING as rcStgPortStpState  

RcStgPortEntry  
SEQUENCE    
  InterfaceIndex as rcStgPort  
  INTEGER as rcStgPortStgId  
  INTEGER as rcStgPortPriority  
  INTEGER as rcStgPortState  
  TruthValue as rcStgPortEnableStp  
  TruthValue as rcStgPortFastStart  
  INTEGER as rcStgPortPathCost  
  BridgeId as rcStgPortDesignatedRoot  
  INTEGER as rcStgPortDesignatedCost  
  BridgeId as rcStgPortDesignatedBridge  
  OCTET STRING as rcStgPortDesignatedPort  
  Counter as rcStgPortForwardTransitions  
  Counter as rcStgPortInConfigBpdus  
  Counter as rcStgPortInTcnBpdus  
  Counter as rcStgPortInBadBpdus  
  Counter as rcStgPortOutConfigBpdus  
  Counter as rcStgPortOutTcnBpdus  
  RowStatus as rcStgPortRowStatus  
  TruthValue as rcStgPortChangeDetection  

RcBridgeFdbEntry  
SEQUENCE    
  INTEGER as rcBridgeFdbStatus  
  MacAddress as rcBridgeFdbAddress  
  InterfaceIndex as rcBridgeFdbPort  
  TruthValue as rcBridgeFdbMonitor  
  INTEGER as rcBridgeFdbPriority  
  INTEGER as rcBridgeFdbQosLevel  
  TruthValue as rcBridgeFdbSmltRemote  
  INTEGER as rcBridgeFdbVlanId  

RcBridgeStaticEntry  
SEQUENCE    
  MacAddress as rcBridgeStaticAddress  
  InterfaceIndex as rcBridgeStaticPort  
  TruthValue as rcBridgeStaticMonitor  
  INTEGER as rcBridgeStaticPriority  
  INTEGER as rcBridgeStaticStatus  
  INTEGER as rcBridgeStaticQosLevel  
  INTEGER as rcBridgeStaticVlanId  

RcBridgeFilterEntry  
SEQUENCE    
  MacAddress as rcBridgeFilterAddress  
  InterfaceIndex as rcBridgeFilterPort  
  OCTET STRING as rcBridgeFilterNotAllowedFrom  
  INTEGER as rcBridgeFilterStatus  
  INTEGER as rcBridgeFilterVlanId  

RcBridgeUnknownMacDiscardEntry  
SEQUENCE    
  InterfaceIndex as rcBridgeUnknownMacDiscardIfIndex  
  TruthValue as rcBridgeUnknownMacDiscardAutoLearnEnable  
  INTEGER as rcBridgeUnknownMacDiscardAutoLearnMode  
  INTEGER as rcBridgeUnknownMacDiscardAutoLearnTableMode  
  INTEGER as rcBridgeUnknownMacDiscardLogViolations  
  INTEGER as rcBridgeUnknownMacDiscardSendTrap  
  INTEGER as rcBridgeUnknownMacDiscardDisablePort  
  INTEGER as rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor  
  INTEGER as rcBridgeUnknownMacDiscardDefaultAutoLearnPriority  
  INTEGER as rcBridgeUnknownMacDiscardMacCountMax  
  INTEGER as rcBridgeUnknownMacDiscardMacCountCur  

RcBridgeManualEditEntry  
SEQUENCE    
  MacAddress as rcBridgeManualEditAddress  
  PortSet as rcBridgeManualEditPorts  
  TruthValue as rcBridgeManualEditMonitor  
  INTEGER as rcBridgeManualEditPriority  
  INTEGER as rcBridgeManualEditStatus  

RcBridgeAutoLearnEntry  
SEQUENCE    
  MacAddress as rcBridgeAutoLearnAddress  
  PortSet as rcBridgeAutoLearnPort  
  TruthValue as rcBridgeAutoLearnMonitor  
  INTEGER as rcBridgeAutoLearnPriority  
  INTEGER as rcBridgeAutoLearnAction  

RcBridgeStaticMulticastEntry  
SEQUENCE    
  MacAddress as rcBridgeStaticMulticastAddress  
  PortSet as rcBridgeStaticMulticastForwardingPorts  
  IdList as rcBridgeStaticMulticastMltIds  
  RowStatus as rcBridgeStaticMulticastRowStatus  

RcRateLimitEntry  
SEQUENCE    
  InterfaceIndex as rcRateLimitIfIndex  
  INTEGER as rcRateLimitIfTrafficType  
  INTEGER as rcRateLimitIfAllowedRate  
  TruthValue as rcRateLimitIfEnable  
  INTEGER as rcRateLimitIfAllowedRatePps  

RcDeviceFlashEntry  
SEQUENCE    
  INTEGER as rcDeviceFlashFileNum  
  DisplayString as rcDeviceFlashFileName  
  DisplayString as rcDeviceFlashFileVersion  
  INTEGER as rcDeviceFlashFileType  
  INTEGER as rcDeviceFlashFileMode  
  INTEGER as rcDeviceFlashFileSize  
  INTEGER as rcDeviceFlashFileCrc  
  INTEGER as rcDeviceFlashFileStatus  
  RowStatus as rcDeviceFlashRowStatus  

RcDevicePcmciaEntry  
SEQUENCE    
  INTEGER as rcDevicePcmciaFileNum  
  DisplayString as rcDevicePcmciaFileName  
  DisplayString as rcDevicePcmciaFileVersion  
  INTEGER as rcDevicePcmciaFileType  
  INTEGER as rcDevicePcmciaFileMode  
  INTEGER as rcDevicePcmciaFileSize  
  INTEGER as rcDevicePcmciaFileCrc  
  INTEGER as rcDevicePcmciaFileStatus  
  RowStatus as rcDevicePcmciaRowStatus  

RcMltEntry  
SEQUENCE    
  INTEGER as rcMltId  
  DisplayString as rcMltName  
  PortSet as rcMltPortMembers  
  INTEGER as rcMltPortType  
  INTEGER as rcMltNumVlanIds  
  IdList as rcMltVlanIds  
  RowStatus as rcMltRowStatus  
  TruthValue as rcMltEnable  
  TruthValue as rcMltLoadBalance  
  INTEGER as rcMltDistributionAlgorithm  
  InterfaceIndex as rcMltIfIndex  
  INTEGER as rcMltMltType  
  INTEGER as rcMltSmltId  
  INTEGER as rcMltRunningType  

RcSyslogHostEntry  
SEQUENCE    
  INTEGER as rcSyslogHostId  
  IpAddress as rcSyslogHostIpAddr  
  INTEGER as rcSyslogHostUdpPort  
  INTEGER as rcSyslogHostFacility  
  INTEGER as rcSyslogHostModuleId  
  INTEGER as rcSyslogHostModuleId2  
  INTEGER as rcSyslogHostSeverity  
  INTEGER as rcSyslogHostMapInfoSeverity  
  INTEGER as rcSyslogHostMapWarningSeverity  
  INTEGER as rcSyslogHostMapErrorSeverity  
  INTEGER as rcSyslogHostMapMfgSeverity  
  INTEGER as rcSyslogHostMapFatalSeverity  
  INTEGER as rcSyslogHostMapTraceMsg  
  INTEGER as rcSyslogHostMapTrapMsg  
  TruthValue as rcSyslogHostLogTraceMsgs  
  TruthValue as rcSyslogHostLogTrapMsgs  
  TruthValue as rcSyslogHostEnable  
  RowStatus as rcSyslogHostRowStatus  

RcDiagMirrorByPortEntry  
SEQUENCE    
  INTEGER as rcDiagMirrorByPortId  
  InterfaceIndex as rcDiagMirrorByPortMirroredPort  
  InterfaceIndex as rcDiagMirrorByPortMirroringPort  
  INTEGER as rcDiagMirrorByPortMode  
  TruthValue as rcDiagMirrorByPortEnable  
  RowStatus as rcDiagMirrorByPortRowStatus  
  INTEGER as rcDiagMirrorByPortOctapidId  

RcDiagPortConvSteeringEntry  
SEQUENCE    
  INTEGER as rcDiagPortConvSteeringId  
  INTEGER as rcDiagPortConvSteeringPortOne  
  INTEGER as rcDiagPortConvSteeringPortTwo  
  INTEGER as rcDiagPortConvSteeringMode  
  INTEGER as rcDiagPortConvSteeringForwardPort  
  TruthValue as rcDiagPortConvSteeringEnable  
  RowStatus as rcDiagPortConvSteeringRowStatus  

RcDiagMacConvSteeringEntry  
SEQUENCE    
  INTEGER as rcDiagMacConvSteeringId  
  MacAddress as rcDiagMacConvSteeringSrcMac  
  MacAddress as rcDiagMacConvSteeringDstMac  
  INTEGER as rcDiagMacConvSteeringInPort  
  INTEGER as rcDiagMacConvSteeringForwardPort  
  TruthValue as rcDiagMacConvSteeringEnable  
  RowStatus as rcDiagMacConvSteeringRowStatus  

RcIpxAddrEntry  
SEQUENCE    
  INTEGER as rcIpxAddrVlanId  
  OCTET STRING as rcIpxAddrNetAddr SIZE(4)  
  INTEGER as rcIpxAddrEncap  
  RowStatus as rcIpxAddrEntryStatus  

RcPosPppIpxEntry  
SEQUENCE    
  InterfaceIndex as rcPosPppIpxIfIndex  
  INTEGER as rcPosPppIpxIpxcpAdminStatus  
  INTEGER as rcPosPppIpxOperStatus  
  OCTET STRING as rcPosPppIpxNetAddr SIZE(4)  
  INTEGER as rcPosPppIpxRoutingProtocol  

RcPosSonetEntry  
SEQUENCE    
  InterfaceIndex as rcPosSonetIndex  
  INTEGER as rcPosSonetFraming  
  INTEGER as rcPosSonetSectionTrace  
  INTEGER as rcPosSonetSectionGrowth  
  INTEGER as rcPosSonetSyncronization  
  OCTET STRING as rcPosSonetStsPathTrace SIZE(64)  
  INTEGER as rcPosSonetPathSignalLabel  
  INTEGER as rcPosSonetClockSource  
  EnableValue as rcPosSonetScramble  
  INTEGER as rcPosSonetOperStatusFraming  
  INTEGER as rcPosSonetOperStatusClockSource  
  EnableValue as rcPosSonetOperStatusScramble  
  INTEGER as rcPosSonetOperStatusSectionTrace  
  INTEGER as rcPosSonetOperStatusPathSignalLabel  

RcPosLineStatusEntry  
SEQUENCE    
  InterfaceIndex as rcPosLineStatusIndex  
  MacAddress as rcPosLineStatusLocalMACAddress  
  MacAddress as rcPosLineStatusRemoteMACAddress  
  IpAddress as rcPosLineStatusLocalIpAddr  
  IpAddress as rcPosLineStatusRemoteIpAddr  
  INTEGER as rcPosLineStatusOutQuality  
  INTEGER as rcPosLineStatusLocalPeriod  
  INTEGER as rcPosLineStatusDeviceType  
  INTEGER as rcPosLineStatusDeviceRev  
  INTEGER as rcPosLineStatusIpxRoutingProtocol  

RcPosLineConfigEntry  
SEQUENCE    
  InterfaceIndex as rcPosLineConfigIndex  
  MacAddress as rcPosLineConfigLocalMACAddress  
  MacAddress as rcPosLineConfigRemoteMACAddress  
  IpAddress as rcPosLineConfigLocalIpAddr  
  IpAddress as rcPosLineConfigRemoteIpAddr  
  INTEGER as rcPosLineConfigRemoteReportPeriod  
  INTEGER as rcPosLineConfigLqrThreshold  
  INTEGER as rcPosLineConfigOutQuality  
  EnableValue as rcPosLineConfigPppStp  
  TruthValue as rcPosLineConfigLoopBack  
  MacAddress as rcPosLineConfigIpxVlanMacAddress  
  MacAddress as rcPosLineConfigIpxRemoteMacAddress  

RcPosSioCardConfigEntry  
SEQUENCE    
  INTEGER as rcPosSioCardConfigSlotIndex  
  INTEGER as rcPosSioCardConfigAction  
  INTEGER as rcPosSioCardConfigTraceMode  
  DisplayString as rcPosSioCardConfigImageFileName  

RcPosOperStatusEntry  
SEQUENCE    
  InterfaceIndex as rcPosOperStatusIndex  
  INTEGER as rcPosOperStatusLqrStatus  
  INTEGER as rcPosOperStatusLineLqrThreshold  
  INTEGER as rcPosOperStatusLinkMagicNumber  
  EnableValue as rcPosOperStatusLinePppStp  

RcRadiusServerEntry  
SEQUENCE    
  INTEGER as rcRadiusServerPriority  
  IpAddress as rcRadiusServerAddress  
  INTEGER as rcRadiusServerTimeOut  
  TruthValue as rcRadiusServerEnable  
  INTEGER as rcRadiusServerMaxRetries  
  INTEGER as rcRadiusServerUdpPort  
  DisplayString as rcRadiusServerSecretKey  
  Counter as rcRadiusServerAccessRequests  
  Counter as rcRadiusServerAccessAccepts  
  Counter as rcRadiusServerAccessRejects  
  Counter as rcRadiusServerBadResponses  
  Counter as rcRadiusServerPendingRequests  
  Counter as rcRadiusServerClientRetries  
  RowStatus as rcRadiusServerRowStatus  

RcIgmpInterfaceExtnEntry  
SEQUENCE    
  InterfaceIndex as rcIgmpInterfaceExtnIfIndex  
  TruthValue as rcIgmpInterfaceExtnSnoopEnable  
  TruthValue as rcIgmpInterfaceExtnProxySnoopEnable  
  INTEGER as rcIgmpInterfaceExtnMaxAdvertiseInterval  
  INTEGER as rcIgmpInterfaceExtnMinAdvertiseInterval  
  INTEGER as rcIgmpInterfaceExtnMaxInitialAdvertiseInterval  
  INTEGER as rcIgmpInterfaceExtnMaxInitialAdvertments  
  INTEGER as rcIgmpInterfaceExtnNeighborDeadInterval  
  TruthValue as rcIgmpInterfaceExtnFastLeaveEnable  
  PortSet as rcIgmpInterfaceExtnFastLeavePortMembers  
  TruthValue as rcIgmpInterfaceExtnMrdiscEnable  
  PortSet as rcIgmpInterfaceExtnDiscoveredRouterPorts  
  PortSet as rcIgmpInterfaceExtnSnoopMRouterPorts  
  PortSet as rcIgmpInterfaceExtnSnoopActiveMRouterPorts  
  INTEGER as rcIgmpInterfaceExtnSnoopMRouterExpiration  
  INTEGER as rcIgmpInterfaceExtnFlushAction  
  EnableValue as rcIgmpInterfaceExtnRouterAlertEnable  

RcIgmpStaticEntry  
SEQUENCE    
  InterfaceIndex as rcIgmpStaticIfIndex  
  IpAddress as rcIgmpStaticGrpAddr  
  PortSet as rcIgmpStaticMemberPorts  
  PortSet as rcIgmpStaticNotAllowedToJoin  
  RowStatus as rcIgmpStaticRowStatus  

RcIgmpAccessEntry  
SEQUENCE    
  InterfaceIndex as rcIgmpAccessIfIndex  
  IpAddress as rcIgmpAccessGrpAddr  
  IpAddress as rcIgmpAccessHostAddr  
  INTEGER as rcIgmpAccessMode  
  RowStatus as rcIgmpAccessRowStatus  
  IpAddress as rcIgmpAccessHostMask  

RcIgmpSenderEntry  
SEQUENCE    
  IpAddress as rcIgmpSenderGrpAddr  
  InterfaceIndex as rcIgmpSenderIfIndex  
  IpAddress as rcIgmpSenderMemberAddr  
  INTEGER as rcIgmpSenderAction  
  INTEGER as rcIgmpSenderTPort  

RcNtpServerEntry  
SEQUENCE    
  IpAddress as rcNtpServerAddress  
  TruthValue as rcNtpServerEnable  
  TruthValue as rcNtpServerAuthentication  
  INTEGER as rcNtpServerKeyId  
  Counter as rcNtpServerAccessAttempts  
  Counter as rcNtpServerAccessSuccess  
  Counter as rcNtpServerAccessFailure  
  RowStatus as rcNtpServerRowStatus  

RcNtpKeyEntry  
SEQUENCE    
  INTEGER as rcNtpKeyId  
  DisplayString as rcNtpKeySecret  
  RowStatus as rcNtpKeyRowStatus  

Rc2kCpuEthernetPortEntry  
SEQUENCE    
  InterfaceIndex as rc2kCpuEthernetPortIfIndex  
  DisplayString as rc2kCpuEthernetPortDescr  
  INTEGER as rc2kCpuEthernetPortAdminStatus  
  INTEGER as rc2kCpuEthernetPortOperStatus  
  IpAddress as rc2kCpuEthernetPortAddr  
  IpAddress as rc2kCpuEthernetPortMask  
  IpAddress as rc2kCpuEthernetPortGateway  
  IpAddress as rc2kCpuEthernetPortNetwork  
  TruthValue as rc2kCpuEthernetPortAutoNegotiate  
  INTEGER as rc2kCpuEthernetPortAdminDuplex  
  INTEGER as rc2kCpuEthernetPortOperDuplex  
  INTEGER as rc2kCpuEthernetPortAdminSpeed  
  INTEGER as rc2kCpuEthernetPortOperSpeed  
  TruthValue as rc2kCpuEthernetPortEnableBootp  
  MacAddress as rc2kCpuEthernetPortMgmtMacAddr  

Rc2kCpuSerialPortEntry  
SEQUENCE    
  InterfaceIndex as rc2kCpuSerialPortIfIndex  
  DisplayString as rc2kCpuSerialPortDescr  
  INTEGER as rc2kCpuSerialPortMode  
  INTEGER as rc2kCpuSerialPortAdminStatus  
  INTEGER as rc2kCpuSerialPortOperStatus  
  INTEGER as rc2kCpuSerialPortBaudRate  
  INTEGER as rc2kCpuSerialPortDataBits  
  IpAddress as rc2kCpuSerialPortMyAddr  
  IpAddress as rc2kCpuSerialPortPeerAddr  
  INTEGER as rc2kCpuSerialPortSlipMtu  
  TruthValue as rc2kCpuSerialPortSlipTxRxCompress  
  TruthValue as rc2kCpuSerialPortSlipRxCompress  
  DisplayString as rc2kCpuSerialPortPppConfigFile  

Rc2kDeviceGlobalEntry  
SEQUENCE    
  INTEGER as rc2kDeviceGlobalSlot  
  INTEGER as rc2kDeviceGlobalFlashBytesUsed  
  INTEGER as rc2kDeviceGlobalFlashBytesFree  
  INTEGER as rc2kDeviceGlobalFlashNumFiles  
  INTEGER as rc2kDeviceGlobalPcmciaBytesUsed  
  INTEGER as rc2kDeviceGlobalPcmciaBytesFree  
  INTEGER as rc2kDeviceGlobalPcmciaNumFiles  
  INTEGER as rc2kDeviceGlobalAction  
  INTEGER as rc2kDeviceGlobalResult  

Rc2kDeviceFlashFileEntry  
SEQUENCE    
  INTEGER as rc2kDeviceFlashFileSlot  
  DisplayString as rc2kDeviceFlashFileName  
  DisplayString as rc2kDeviceFlashFileDate  
  INTEGER as rc2kDeviceFlashFileSize  

Rc2kDevicePcmciaFileEntry  
SEQUENCE    
  INTEGER as rc2kDevicePcmciaFileSlot  
  DisplayString as rc2kDevicePcmciaFileName  
  DisplayString as rc2kDevicePcmciaFileDate  
  INTEGER as rc2kDevicePcmciaFileSize  

Rc2kBootConfigEntry  
SEQUENCE    
  INTEGER as rc2kBootConfigSlot  
  DisplayString as rc2kBootConfigLastBootConfigSource  
  DisplayString as rc2kBootConfigLastRuntimeImageSource  
  DisplayString as rc2kBootConfigLastRuntimeConfigSource  
  DisplayString as rc2kBootConfigPrimaryImageSource  
  DisplayString as rc2kBootConfigPrimaryConfigSource  
  DisplayString as rc2kBootConfigSecondaryImageSource  
  DisplayString as rc2kBootConfigSecondaryConfigSource  
  DisplayString as rc2kBootConfigTertiaryImageSource  
  DisplayString as rc2kBootConfigTertiaryConfigSource  
  TruthValue as rc2kBootConfigEnableAutoBoot  
  TruthValue as rc2kBootConfigEnableFactoryDefaults  
  TruthValue as rc2kBootConfigEnableDebugMode  
  TruthValue as rc2kBootConfigEnableHwWatchDogTimer  
  TruthValue as rc2kBootConfigEnableRebootOnError  
  TruthValue as rc2kBootConfigEnableTelnetServer  
  TruthValue as rc2kBootConfigEnableRloginServer  
  TruthValue as rc2kBootConfigEnableFtpServer  
  TruthValue as rc2kBootConfigEnableTftpServer  
  DisplayString as rc2kBootConfigSwVersion  
  INTEGER as rc2kBootConfigMulticastConfigProfile  
  TruthValue as rc2kBootConfigEnableSshServer  

Rc2kCardEntry  
SEQUENCE    
  INTEGER as rc2kCardIndex  
  INTEGER as rc2kCardFrontType  
  DisplayString as rc2kCardFrontDescription  
  INTEGER as rc2kCardFrontAdminStatus  
  INTEGER as rc2kCardFrontOperStatus  
  DisplayString as rc2kCardFrontSerialNum  
  DisplayString as rc2kCardFrontHwVersion  
  DisplayString as rc2kCardFrontPartNumber  
  DisplayString as rc2kCardFrontDateCode  
  DisplayString as rc2kCardFrontDeviations  
  MacAddress as rc2kCardFrontMacAddr  
  INTEGER as rc2kCardBackType  
  DisplayString as rc2kCardBackDescription  
  DisplayString as rc2kCardBackSerialNum  
  DisplayString as rc2kCardBackHwVersion  
  DisplayString as rc2kCardBackPartNumber  
  DisplayString as rc2kCardBackDateCode  
  DisplayString as rc2kCardBackDeviations  
  INTEGER as rc2kCardPCMCIAType  
  DisplayString as rc2kCardPCMCIADescr  
  DisplayString as rc2kCardASICDescr  
  TruthValue as rc2kCardFrontMasterIO  

Rc2kQosQosEntry  
SEQUENCE    
  INTEGER as rc2kQosQosRow  
  INTEGER as rc2kQosQosLevel  
  DisplayString as rc2kQosQosName  
  INTEGER as rc2kQosQosAdminWeight  
  INTEGER as rc2kQosQosOperWeight  
  INTEGER as rc2kQosOctapidMode  
  INTEGER as rc2kQosQosAdminThreshold  
  INTEGER as rc2kQosQosOperThreshold  

Rc2kQosIngressTagToQosEntry  
SEQUENCE    
  INTEGER as rc2kQosIngressTagToQosRow  
  INTEGER as rc2kQosIngressTagToQosInIeee8021P  
  INTEGER as rc2kQosIngressTagToQosQosLevel  

Rc2kQosIngressDsFieldToQosEntry  
SEQUENCE    
  INTEGER as rc2kQosIngressDsFieldToQosRow  
  INTEGER as rc2kQosIngressDsFieldToQosInDsField  
  INTEGER as rc2kQosIngressDsFieldToQosQosLevel  

Rc2kQosEgressQosToTagEntry  
SEQUENCE    
  INTEGER as rc2kQosEgressQosToTagRow  
  INTEGER as rc2kQosEgressQosToTagQosLevel  
  INTEGER as rc2kQosEgressQosToTagOutIeee8021P  

Rc2kQosEgressQosToDsFieldEntry  
SEQUENCE    
  INTEGER as rc2kQosEgressQosToDsFieldRow  
  INTEGER as rc2kQosEgressQosToDsFieldQosLevel  
  INTEGER as rc2kQosEgressQosToDsFieldOutDsField  

Rc2kQosTrafficProfileEntry  
SEQUENCE    
  INTEGER as rc2kQosTrafficProfileId  
  DisplayString as rc2kQosTrafficProfileName  
  TruthValue as rc2kQosTrafficProfileEnable  
  TruthValue as rc2kQosTrafficProfileTranslateDscpEnable  
  DisplayString as rc2kQosTrafficProfileInProfileDscp SIZE(6)  
  DisplayString as rc2kQosTrafficProfileOutProfileDscp SIZE(6)  
  TruthValue as rc2kQosTrafficProfileDiscardEnable  
  INTEGER as rc2kQosTrafficProfileAverageRate  
  INTEGER as rc2kQosTrafficProfilePeakRate  
  RowStatus as rc2kQosTrafficProfileRowStatus  

Rc2kQosIngressDscpToQosEntry  
SEQUENCE    
  INTEGER as rc2kQosIngressDscpToQosRow  
  INTEGER as rc2kQosIngressDscpToQosInDscp  
  DisplayString as rc2kQosIngressDscpToQosInDscpBinaryFormat SIZE(6)  
  INTEGER as rc2kQosIngressDscpToQosQosLevel  

Rc2kQosEgressQosToDscpEntry  
SEQUENCE    
  INTEGER as rc2kQosEgressQosToDscpRow  
  INTEGER as rc2kQosEgressQosToDscpQosLevel  
  INTEGER as rc2kQosEgressQosToDscpOutDscp  
  DisplayString as rc2kQosEgressQosToDscpOutDscpBinaryFormat SIZE(6)  

Rc2kAtmPortEntry  
SEQUENCE    
  InterfaceIndex as rc2kAtmPortIfIndex  
  INTEGER as rc2kAtmPortNumVpiBits  
  INTEGER as rc2kAtmPortNumVciBits  
  INTEGER as rc2kAtmPortMediaType  
  TruthValue as rc2kAtmPortScrambleEnable  
  INTEGER as rc2kAtmPortFramingMode  
  INTEGER as rc2kAtmPortClockSource  
  INTEGER as rc2kAtmPortLineSpeed  
  INTEGER as rc2kAtmPortLoopBackMode  
  MacAddress as rc2kAtmPortMacAddress  

Rc2kAtmPvcEntry  
SEQUENCE    
  InterfaceIndex as rc2kAtmPvcIfIndex  
  INTEGER as rc2kAtmPvcVpi  
  INTEGER as rc2kAtmPvcVci  
  INTEGER as rc2kAtmPvcPvcId  
  DisplayString as rc2kAtmPvcName  
  INTEGER as rc2kAtmPvcEncapsulation  
  INTEGER as rc2kAtmPvcServiceType  
  INTEGER as rc2kAtmPvcPeakCellRate  
  INTEGER as rc2kAtmPvcSustainedCellRate  
  INTEGER as rc2kAtmPvcMaxBurstSize  
  RowStatus as rc2kAtmPvcRowStatus  
  TruthValue as rc2kAtmPvcOamLbMgmtEnable  
  INTEGER as rc2kAtmPvcOamLbSendFrequency  
  INTEGER as rc2kAtmPvcOamLbRetryFrequency  
  INTEGER as rc2kAtmPvcOamLbUpCount  
  INTEGER as rc2kAtmPvcOamLbDownCount  
  TruthValue as rc2kAtmPvcOamTrapEnable  
  INTEGER as rc2kAtmPvcOamVcStatus  
  Counter as rc2kAtmPvcOamLbRequestSent  
  Counter as rc2kAtmPvcOamLbReplySent  
  Counter as rc2kAtmPvcOamLbReplyReceived  

Rc2kAtm1483ElanEntry  
SEQUENCE    
  InterfaceIndex as rc2kAtm1483ElanIfIndex  
  INTEGER as rc2kAtm1483ElanElanId  
  INTEGER as rc2kAtm1483ElanNumPvcIds  
  IdList as rc2kAtm1483ElanPvcIds  
  INTEGER as rc2kAtm1483ElanVlanId  
  RowStatus as rc2kAtm1483ElanRowStatus  
  INTEGER as rc2kAtm1483ElanConnectType  
  MacAddress as rc2kAtm1483ElanVlanMacAddress  
  MacAddress as rc2kAtm1483ElanDummyMacAddress  
  IpAddress as rc2kAtm1483ElanLocalIpAddress  
  IpAddress as rc2kAtm1483ElanRemoteIpAddress  
  TruthValue as rc2kAtm1483ElanInArpSendEnable  
  INTEGER as rc2kAtm1483ElanInArpSendInterval  
  INTEGER as rc2kAtm1483ElanIpxVlanEncapMethod  
  INTEGER as rc2kAtm1483ElanIpxNetworkNum  
  INTEGER as rc2kAtm1483ElanStgId  
  INTEGER as rc2kAtm1483ElanrcStgTaggedBpduVlanId  

Rc2kAtmSioCardConfigEntry  
SEQUENCE    
  INTEGER as rc2kAtmSioCardConfigSlotIndex  
  INTEGER as rc2kAtmSioCardConfigAction  
  INTEGER as rc2kAtmSioCardConfigTraceMode  
  DisplayString as rc2kAtmSioCardConfigImageFileName  

Rc2kMdaCardEntry  
SEQUENCE    
  INTEGER as rc2kMdaCardSlotNum  
  INTEGER as rc2kMdaCardMdaNum  
  INTEGER as rc2kMdaCardType  
  DisplayString as rc2kMdaCardDescription  
  INTEGER as rc2kMdaCardAdminStatus  
  INTEGER as rc2kMdaCardOperStatus  
  DisplayString as rc2kMdaCardSerialNum  
  DisplayString as rc2kMdaCardHwVersion  
  DisplayString as rc2kMdaCardPartNumber  
  DisplayString as rc2kMdaCardDateCode  
  DisplayString as rc2kMdaCardDeviations  
  MacAddress as rc2kMdaCardMacAddr  
  INTEGER as rc2kMdaCardNumPorts  
  InterfaceIndex as rc2kMdaCardFirstIfIndex  
  InterfaceIndex as rc2kMdaCardLastIfIndex  

Rc2kCpuEthernetPortRouteEntry  
SEQUENCE    
  IpAddress as rc2kCpuEthernetPortRouteNetwork  
  IpAddress as rc2kCpuEthernetPortRouteGateway  
  RowStatus as rc2kCpuEthernetPortRouteRowStatus