S5-ETHERNET-TRAP-MIB

File: S5-ETHERNET-TRAP-MIB.mib (6209 bytes)

Imported modules

RFC-1215 S5-ETHERNET-COMMON-MIB S5-ETH-REDUNDANT-LINKS-MIB
S5-ROOT-MIB S5-SWITCH-BAYSECURE-MIB

Imported symbols

TRAP-TYPE s5EnPortPartStatus s5EnPortJabberStatus
s5EnPortLinkStatus s5EnRedPortCompanionBrdNum s5EnRedPortCompanionPortNum
s5EnRedPortRemoteOperStatus s5EnRedPortRedundMode s5EnRedPortOperStatus
s5EthTrap s5SbsViolationStatusBrdIndx s5SbsViolationStatusPortIndx
s5SbsViolationStatusMACAddress s5SbsMgmViolationType s5SbsMgmViolationIpAddress

Defined Objects

s5EtrPortAutoPart 1.3.6.1.4.1.45.1.6.2.1.1
A port was auto partitioned (wrapped). This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
TRAP-TYPE    
  s5EnPortPartStatus  
  s5EnPortJabberStatus  

s5EtrPortDteJabbering 1.3.6.1.4.1.45.1.6.2.1.2
An ethernet DTE started jabbering. This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
TRAP-TYPE    
  s5EnPortJabberStatus  

s5EtrRedPortFailure 1.3.6.1.4.1.45.1.6.2.1.3
A port that is in a redundant pair developed a fault. This trap is sent once when the condition is first detected. For all objects returned in the trap, the instance identifies the board and the port index. The following values are returned: s5EnRedPortOperStatus.........The status of the port. The value will distinguish between a local fault, a remote fault, and a missing board. s5EnRedPortCompanionBrdNum....The index of the slot containing the board of the other port in the redundant pair. s5EnRedPortCompanionPortNum...The index of the other port in the redundant pair. s5EnPortPartStatus, s5EnPortLinkStatus and s5EnPortJabberStatus..........These values may help determine the cause of the local fault.
TRAP-TYPE    
  s5EnRedPortOperStatus  
  s5EnRedPortCompanionBrdNum  
  s5EnRedPortCompanionPortNum  
  s5EnPortPartStatus  
  s5EnPortLinkStatus  
  s5EnPortJabberStatus  

s5EtrRedBadRemCfgDetected 1.3.6.1.4.1.45.1.6.2.1.4
This trap is sent periodically when the NMM detects a remoteOperStatus of invalid on a port set for redundancy. The instance identifies the board and port index. The following values are returned: s5EnRedPortRemoteOperStatus.....The value of the received signal from the remote port. s5EnRedPortRedundMode...the redundancy mode of the port.
TRAP-TYPE    
  s5EnRedPortRemoteOperStatus  
  s5EnRedPortRedundMode  

s5EtrSbsMacAccessViolation 1.3.6.1.4.1.45.1.6.2.1.5
This trap is sent when the switch device detects a Mac_address based security violation on a port set by s5SbsSecurityAction defined in s5sbs100.mib. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsViolationStatusBrdIndx...the Board number on which a security violation was seen. s5SbsViolationStatusPortIndx...the Port number on which a security violation was seen. s5SbsViolationStatusMACIndx...the mac address trigers this violation
TRAP-TYPE    
  s5SbsViolationStatusBrdIndx  
  s5SbsViolationStatusPortIndx  
  s5SbsViolationStatusMACAddress  

s5EtrMgmAccessViolation 1.3.6.1.4.1.45.1.6.2.1.6
This trap is sent when the switch device detects a management access violation on the switch. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsMgmViolationType.....WEB access violation or telnet access violation or SNMP access violation. s5SbsMgmViolationIpAddress...the invalid IP address.
TRAP-TYPE    
  s5SbsMgmViolationType  
  s5SbsMgmViolationIpAddress  

s5EtrPortManualPart 1.3.6.1.4.1.45.1.6.2.1.7
A port was manually partitioned (wrapped). This trap is sent once when the port is initially partitioned. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
TRAP-TYPE    
  s5EnPortPartStatus  
  s5EnPortJabberStatus