
| SNMPv2-SMI | SNMPv2-MIB | SNMPv2-TC |
| SNMPv2-CONF | SNMP-FRAMEWORK-MIB | SNMP-TARGET-MIB |
| INET-ADDRESS-MIB | IF-MIB | DOCS-IF-MIB |
| CLAB-TOPO-MIB | DOCS-CABLE-DEVICE-MIB | CLAB-DEF-MIB |
| docsIf3Mib | 1.3.6.1.4.1.4491.2.1.20 | ||
| This MIB module contains the management objects for the management of DOCSIS 3.0 features, primarly channel bonding, interface topology and enhanced signal quality montoring. Copyright 1999-2008 Cable Television Laboratories, Inc. All rights reserved. | |||
| MODULE-IDENTITY | |||
| docsIf3Notifications | 1.3.6.1.4.1.4491.2.1.20.0 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmtsEventNotif | 1.3.6.1.4.1.4491.2.1.20.0.1 | ||
| A notification to report a DOCSIS event detected on the CMTS. This notification includes the following information: - docsDevEvLevel: the DOCSIS priority level associated with the event. - docsDevEvId: the numeric identifier of the event. - docsDevEvText: The text description of the event. - docsDevEvLastTime: The local date and time when this event was generated. - sysName: the administratively-assigned name of the CMTS. e.g. The fully-qualified domain name as indicated in RFC 3418 or in the absence the IP address of the CMTS administrative interface in dot '.' notation for IPv4 and colon ':' notation for and IPv6 Address as indicated in RFC 3164 | |||
| NOTIFICATION-TYPE | |||
| docsDevEvLevel | |||
| docsDevEvId | |||
| docsDevEvText | |||
| docsDevEvLastTime | |||
| sysName | |||
| docsIf3CmEventNotif | 1.3.6.1.4.1.4491.2.1.20.0.2 | ||
| A notification to report a DOCSIS event detected on the CM. This notification includes the following information: - docsDevEvLevel: the priority level associated with the event. - docsDevEvId: the unique identifier of the event that occurred. - docsDevEvText: a textual description of the event. - docsDevEvLastTime: The local date and time when this event was generated. | |||
| NOTIFICATION-TYPE | |||
| docsDevEvLevel | |||
| docsDevEvId | |||
| docsDevEvText | |||
| docsDevEvLastTime | |||
| docsIf3MibObjects | 1.3.6.1.4.1.4491.2.1.20.1 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.1 | ||
| This object defines attributes of the CM connectivity status.This object provides CM connectivity status information of the CM previously available in the SNMP table docsIfCmStatusTable. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmStatusEntry | |||
| docsIf3CmStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.1.1 | ||
| The conceptual row of docsIf3CmStatusTable. An instance exist for the CM MAC Domain Interface. | |||
| OBJECT-TYPE | |||
| DocsIf3CmStatusEntry | |||
| docsIf3CmStatusValue | 1.3.6.1.4.1.4491.2.1.20.1.1.1.1 | ||
| This attribute denotes the current CM connectivity state. For the case of IP acquisition related states, this attribute reflects states for the current CM provisioning mode, not the other DHCP process associated with dual stack operation. | |||
| OBJECT-TYPE | |||
| CmRegState | |||
| docsIf3CmStatusCode | 1.3.6.1.4.1.4491.2.1.20.1.1.1.2 | ||
| This attribute denotes the status code for CM as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a two- or three-digit number indicating the status condition, followed by a decimal. An example of a returned value could be 'T101.0'. The zero-length hex string indicates no status code yet registered. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0 | 5 | 6) | ||
| docsIf3CmStatusResets | 1.3.6.1.4.1.4491.2.1.20.1.1.1.3 | ||
| This attribute denotes the number of times the CM reset or initialized this interface. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusLostSyncs | 1.3.6.1.4.1.4491.2.1.20.1.1.1.4 | ||
| This attribute denotes the number of times the CM lost synchronization with the downstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusInvalidMaps | 1.3.6.1.4.1.4491.2.1.20.1.1.1.5 | ||
| This attribute denotes the number of times the CM received invalid MAP messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusInvalidUcds | 1.3.6.1.4.1.4491.2.1.20.1.1.1.6 | ||
| This attribute denotes the number of times the CM received invalid UCD messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusInvalidRangingRsps | 1.3.6.1.4.1.4491.2.1.20.1.1.1.7 | ||
| This attribute denotes the number of times the CM received invalid ranging response messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusInvalidRegRsps | 1.3.6.1.4.1.4491.2.1.20.1.1.1.8 | ||
| This attribute denotes the number of times the CM received invalid registration response messages. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusT1Timeouts | 1.3.6.1.4.1.4491.2.1.20.1.1.1.9 | ||
| This attribute denotes the number of times counter T1 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusT2Timeouts | 1.3.6.1.4.1.4491.2.1.20.1.1.1.10 | ||
| This attribute denotes the number of times counter T2 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUCCsSuccesses | 1.3.6.1.4.1.4491.2.1.20.1.1.1.11 | ||
| This attribute denotes the number of successful Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUCCFails | 1.3.6.1.4.1.4491.2.1.20.1.1.1.12 | ||
| This attribute denotes the number of failed Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUsTable | 1.3.6.1.4.1.4491.2.1.20.1.2 | ||
| This object defines PHY and MAC information about the CM's upstream channels operating in Multiple Transmit Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit channel mode. This object provides per-CM Upstream channel information previously available in the SNMP table docsIfCmStatusTable. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmStatusUsEntry | |||
| docsIf3CmStatusUsEntry | 1.3.6.1.4.1.4491.2.1.20.1.2.1 | ||
| The conceptual row of docsIf3CmStatusUsTable. An instance exist for the CM upstream channels configured for data transmission. | |||
| OBJECT-TYPE | |||
| DocsIf3CmStatusUsEntry | |||
| docsIf3CmStatusUsTxPower | 1.3.6.1.4.1.4491.2.1.20.1.2.1.1 | ||
| This attribute represents the operational CM transmit power for this upstream channel. | |||
| OBJECT-TYPE | |||
| TenthdBmV | |||
| docsIf3CmStatusUsT3Timeouts | 1.3.6.1.4.1.4491.2.1.20.1.2.1.2 | ||
| This attribute denotes the number of times counter T3 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUsT4Timeouts | 1.3.6.1.4.1.4491.2.1.20.1.2.1.3 | ||
| This attribute denotes the number of times counter T4 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUsRangingAborteds | 1.3.6.1.4.1.4491.2.1.20.1.2.1.4 | ||
| This attribute denotes the number of times the ranging process was aborted by the CMTS. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime ([RFC2863]) for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUsModulationType | 1.3.6.1.4.1.4491.2.1.20.1.2.1.5 | ||
| This attribute indicates modulation type status currently used by the CM for this upstream channel. Since this object specifically identifies PHY Layer mode, the shared upstream channel type 'tdmaAndAtdma' is not permitted. | |||
| OBJECT-TYPE | |||
| DocsisUpstreamType | |||
| docsIf3CmStatusUsEqData | 1.3.6.1.4.1.4491.2.1.20.1.2.1.6 | ||
| This attribute indicates the pre-equalization data for the specified upstream Channel on this CM after convolution with data indicated in the RNG-RSP. This data is valid when docsIfUpChannelPreEqEnable RFC 4546 is set to true. | |||
| OBJECT-TYPE | |||
| DocsEqualizerData | |||
| docsIf3CmStatusUsT3Exceededs | 1.3.6.1.4.1.4491.2.1.20.1.2.1.7 | ||
| This attribute denotes the number of times for excessive T3 timeouts. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmStatusUsIsMuted | 1.3.6.1.4.1.4491.2.1.20.1.2.1.8 | ||
| This attribute denotes whether the upstream channel is muted. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3CmStatusUsRangingStatus | 1.3.6.1.4.1.4491.2.1.20.1.2.1.9 | ||
| This attribute denotes the ranging state of the CM. | |||
| OBJECT-TYPE | |||
| RangingState | |||
| docsIf3CmtsCmRegStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.3 | ||
| This object defines attributes that represent the CM's registration status as tracked by the CMTS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmtsCmRegStatusEntry | |||
| docsIf3CmtsCmRegStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.3.1 | ||
| The conceptual row of docsIf3CmtsCmRegStatusTable. | |||
| OBJECT-TYPE | |||
| DocsIf3CmtsCmRegStatusEntry | |||
| docsIf3CmtsCmRegStatusId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.1 | ||
| This attribute uniquely identifies a CM. The CMTS must assign a single id value for each CM MAC address seen by the CMTS. The CMTS should ensure that the association between an Id and MAC Address remains constant during CMTS uptime. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| docsIf3CmtsCmRegStatusMacAddr | 1.3.6.1.4.1.4491.2.1.20.1.3.1.2 | ||
| This attribute represents the MAC address of the CM. If the CM has multiple MAC addresses, this is the MAC address associated with the MAC Domain interface. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| docsIf3CmtsCmRegStatusIPv6Addr | 1.3.6.1.4.1.4491.2.1.20.1.3.1.3 | ||
| This attribute represents the IPv6 address of the CM. If the CM has no Internet address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address. | |||
| OBJECT-TYPE | |||
| InetAddressIPv6 | |||
| docsIf3CmtsCmRegStatusIPv6LinkLocal | 1.3.6.1.4.1.4491.2.1.20.1.3.1.4 | ||
| This attribute represents the IPv6 local scope address of the CM. If the CM has no link local address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address. | |||
| OBJECT-TYPE | |||
| InetAddressIPv6 | |||
| docsIf3CmtsCmRegStatusIPv4Addr | 1.3.6.1.4.1.4491.2.1.20.1.3.1.5 | ||
| This attribute represents the IPv4 address of this CM. If the CM has no IP address assigned, or the IP address is unknown, this object returns 0.0.0.0. | |||
| OBJECT-TYPE | |||
| InetAddressIPv4 | |||
| docsIf3CmtsCmRegStatusValue | 1.3.6.1.4.1.4491.2.1.20.1.3.1.6 | ||
| This attribute represents the current CM connectivity state. | |||
| OBJECT-TYPE | |||
| CmtsCmRegState | |||
| docsIf3CmtsCmRegStatusMdIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.3.1.7 | ||
| This attribute represents the interface Index of the CMTS MAC Domain where the CM is active. If the interface is unknown, the CMTS returns a value of zero. | |||
| OBJECT-TYPE | |||
| InterfaceIndexOrZero | |||
| docsIf3CmtsCmRegStatusMdCmSgId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.8 | ||
| This attribute represents the ID of the MAC Domain CM Service Group Id (MD-CM-SG-ID) in which the CM is registered. If the ID is unknown, the CMTS returns a value of zero. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsCmRegStatusRcpId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.9 | ||
| This attribute represents the RCP-ID associated with the CM. If the RCP-ID is unknown the CMTS returns a five octet long string of zeros. | |||
| OBJECT-TYPE | |||
| RcpId | |||
| docsIf3CmtsCmRegStatusRccStatusId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.10 | ||
| This attribute represents the RCC Id the CMTS used to configure the CM receive channel set during the registration process. If unknown, the CMTS returns the value zero. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsCmRegStatusRcsId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.11 | ||
| This attribute represents the Receive Channel Set (RCS) that the CM is currently using. If the RCS is unknown, the CMTS returns the value zero. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3CmtsCmRegStatusTcsId | 1.3.6.1.4.1.4491.2.1.20.1.3.1.12 | ||
| This attribute represents Transmit Channel Set (TCS) the CM is currently using. If the TCS is unknown, the CMTS returns the value zero. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3CmtsCmRegStatusQosVersion | 1.3.6.1.4.1.4491.2.1.20.1.3.1.13 | ||
| This attribute denotes the queuing services the CM registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode. | |||
| OBJECT-TYPE | |||
| DocsisQosVersion | |||
| docsIf3CmtsCmRegStatusLastRegTime | 1.3.6.1.4.1.4491.2.1.20.1.3.1.14 | ||
| This attribute represents the last time the CM registered. | |||
| OBJECT-TYPE | |||
| DateAndTime | |||
| docsIf3CmtsCmRegStatusAddrResolutionReqs | 1.3.6.1.4.1.4491.2.1.20.1.3.1.15 | ||
| This attribute counts represents the number of upstream packets received on the SIDs assigned to a CM that are any of the following: Upstream IPv4 ARP Requests Upstream IPv6 Neighbor Solicitation Requests (For routing CMTSs) Upstream IPv4 or IPv6 packets to unresolved destinations in locally connected downstream subnets in the HFC. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated MAC Domain interface. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmtsCmUsStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.4 | ||
| This object defines status information of the CM currently in use Upstream Logical Channels, as reported by the CMTS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmtsCmUsStatusEntry | |||
| docsIf3CmtsCmUsStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.4.1 | ||
| The conceptual row of docsIf3CmtsCmUsStatusTable. | |||
| OBJECT-TYPE | |||
| DocsIf3CmtsCmUsStatusEntry | |||
| docsIf3CmtsCmUsStatusChIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.4.1.1 | ||
| This attribute is a key that represents the ifIndex of the upstream interface. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3CmtsCmUsStatusModulationType | 1.3.6.1.4.1.4491.2.1.20.1.4.1.2 | ||
| This attribute represents the modulation type currently used by this upstream channel. | |||
| OBJECT-TYPE | |||
| DocsisUpstreamType | |||
| docsIf3CmtsCmUsStatusRxPower | 1.3.6.1.4.1.4491.2.1.20.1.4.1.3 | ||
| This attribute represents the receive power of this upstream channel. | |||
| OBJECT-TYPE | |||
| TenthdBmV | |||
| docsIf3CmtsCmUsStatusSignalNoise | 1.3.6.1.4.1.4491.2.1.20.1.4.1.4 | ||
| This attribute represents Signal/Noise ratio as perceived for upstream data from the CM on this upstream channel. | |||
| OBJECT-TYPE | |||
| TenthdB | |||
| docsIf3CmtsCmUsStatusMicroreflections | 1.3.6.1.4.1.4491.2.1.20.1.4.1.5 | ||
| This attribute represents microreflections received on this upstream channel. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| docsIf3CmtsCmUsStatusEqData | 1.3.6.1.4.1.4491.2.1.20.1.4.1.6 | ||
| This attribute represents the equalization data for the CM on this upstream channel. | |||
| OBJECT-TYPE | |||
| DocsEqualizerData | |||
| docsIf3CmtsCmUsStatusUnerroreds | 1.3.6.1.4.1.4491.2.1.20.1.4.1.7 | ||
| This attribute represents the codewords received without error from the CM on this interface. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmtsCmUsStatusCorrecteds | 1.3.6.1.4.1.4491.2.1.20.1.4.1.8 | ||
| This attribute represents the codewords received with correctable errors from the CM on this upstream channeli. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmtsCmUsStatusUncorrectables | 1.3.6.1.4.1.4491.2.1.20.1.4.1.9 | ||
| This attribute represents the codewords received with uncorrectable errors from the CM on this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| docsIf3CmtsCmUsStatusHighResolutionTimingOffset | 1.3.6.1.4.1.4491.2.1.20.1.4.1.10 | ||
| This attribute represents the current measured round trip time on this CM's upstream channel in units of (6.25 microseconds/(64*256)). This attribute returns zero if the value is unknown. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| docsIf3CmtsCmUsStatusIsMuted | 1.3.6.1.4.1.4491.2.1.20.1.4.1.11 | ||
| This attribute has a value 'true' to indicate that the CM's upstream channel has been muted via CM-CTRL-REQ/CM-CTRL-RSP message exchange. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3CmtsCmUsStatusRangingStatus | 1.3.6.1.4.1.4491.2.1.20.1.4.1.12 | ||
| This attribute denotes the ranging state of the CM. | |||
| OBJECT-TYPE | |||
| RangingState | |||
| docsIf3MdChCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.5 | ||
| This object configures the association of downstream and upstream channels to a particular MAC Domain (MD) on a CMTS. The creation of channels and MAC domain object interface instances is vendor-specific. In particular, the assignment of the channel interface index is normally vendor-specific. Therefore, this object is intended only for associating channels to a MAC Domain and assumes that those channels were previously configured. The CMTS may have restrictions on which channels can be configured in the same MAC Domain. For example, it could require the upstream channels to be from the same line card. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChId attribute to be set. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdChCfgEntry | |||
| docsIf3MdChCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.5.1 | ||
| The conceptual row of docsIf3MdChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the channel is configured. The CMTS persists all instances of MdChCfg across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3MdChCfgEntry | |||
| docsIf3MdChCfgChIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.5.1.1 | ||
| This key represents the interface index of an existing upstream or downstream channel that is configured to be part of the MAC Domain. For the case of upstream interfaces the CMTS could reject the assignment of upstream logical channels under the same physical upstream interface to different MAC Domains. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3MdChCfgIsPriCapableDs | 1.3.6.1.4.1.4491.2.1.20.1.5.1.2 | ||
| If set to 'true', this attribute configures the downstream channel as Primary-Capable. The default value for a downstream channel is 'true'. This attribute is not relevant for upstream interfaces, therefore it reports the value 'false' for such interfaces. A CMTS may restrict the permitted value of this attribute based upon physical channel capabilities. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdChCfgChId | 1.3.6.1.4.1.4491.2.1.20.1.5.1.3 | ||
| This attribute contains the 8-bit Downstream Channel ID (DCID) or Upstream Channel ID (UCID) configured for the channel in the MAC Domain. | |||
| OBJECT-TYPE | |||
| ChId | 1..255 | ||
| docsIf3MdChCfgSfProvAttrMask | 1.3.6.1.4.1.4491.2.1.20.1.5.1.4 | ||
| This attribute contains Provisioned Attribute Mask of non-bonded service flow assignment to this channel. | |||
| OBJECT-TYPE | |||
| AttributeMask | |||
| docsIf3MdChCfgRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.5.1.5 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3RccCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.6 | ||
| This object identifies the scope of the Receive Channel Configuration (RCC) and provides a top level container for the Receive Module and Receive Channel objects. The CMTS selects an instance of this object to assign to a CM when it registers. This object supports the creation and deletion of multiple instances. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RccCfgEntry | |||
| docsIf3RccCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.6.1 | ||
| The conceptual row of docsIf3RccCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances of RccCfg across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3RccCfgEntry | |||
| docsIf3RccCfgRcpId | 1.3.6.1.4.1.4491.2.1.20.1.6.1.1 | ||
| This key represents the 'Receive Channel Profile Identifier' (RCP-ID) configured for the MAC Domain indicated by this instance. | |||
| OBJECT-TYPE | |||
| RcpId | |||
| docsIf3RccCfgRccCfgId | 1.3.6.1.4.1.4491.2.1.20.1.6.1.2 | ||
| This key denotes an RCC combination assignment for a particular RcpId and is unique per combination of MAC Domain and RcpId. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| docsIf3RccCfgVendorSpecific | 1.3.6.1.4.1.4491.2.1.20.1.6.1.3 | ||
| This attribute contains vendor-specific information of the CM Receive Channel configuration. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..252) | ||
| docsIf3RccCfgDescription | 1.3.6.1.4.1.4491.2.1.20.1.6.1.4 | ||
| This attribute contains a human-readable description of the CM RCP Configuration. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..15) | ||
| docsIf3RccCfgRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.6.1.5 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3RccStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.7 | ||
| The RCC Status object provides a read-only view of the statically-configured (from the RccCfg object) and dynamically-created RCCs. The CMTS creates an RCC Status instance for each unique MAC Domain Cable Modem Service Group (MD-CM-SG) to which it signals an RCC to the CM. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RccStatusEntry | |||
| docsIf3RccStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.7.1 | ||
| The conceptual row of docsIf3RccStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. | |||
| OBJECT-TYPE | |||
| DocsIf3RccStatusEntry | |||
| docsIf3RccStatusRcpId | 1.3.6.1.4.1.4491.2.1.20.1.7.1.1 | ||
| This key represents the RCP-ID to which this instance applies. | |||
| OBJECT-TYPE | |||
| RcpId | |||
| docsIf3RccStatusRccStatusId | 1.3.6.1.4.1.4491.2.1.20.1.7.1.2 | ||
| This key represents an RCC combination for a particular RcpId either from an RCC configuration object or a CMTS-determined RCC and is unique per combination of MAC Domain IfIndex and RcpId. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| docsIf3RccStatusRccCfgId | 1.3.6.1.4.1.4491.2.1.20.1.7.1.3 | ||
| This attribute identifies an RCC-Configured combination from which this instance was defined. If nonzero, it corresponds to the RccCfg instance from which the RCC was created. Zero means that the RCC was dynamically created by the CMTS. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| docsIf3RccStatusValidityCode | 1.3.6.1.4.1.4491.2.1.20.1.7.1.4 | ||
| This attribute indicates whether the RCC instance of this object is valid or not. An RCC Status instance from a configured or a dynamic RCC could become invalid, for example, due changes in the topology. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), valid(2), invalid(3), wrongPrimaryDs(4), missingPrimaryDs(5), multiplePrimaryDs(6), duplicateDs(7), wrongFrequencyRange(8), wrongConnectivity(9) | ||
| docsIf3RccStatusValidityCodeText | 1.3.6.1.4.1.4491.2.1.20.1.7.1.5 | ||
| This attribute contains the CMTS vendor-specific log information from the Receive Channel Configuration Status encoding. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | |||
| docsIf3RxChCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.8 | ||
| The Receive Channel Configuration object permits an operator to configure how CMs registered with certain Receive Channel Profiles will configure the Receive Channels within their profile. When a CM registers with an RCP for which all Receive Channel Indices (RcIds) are configured in the Receive Module object and all Receive Channels are configured within this object, the CMTS should use the configuration within these objects to set the Receive Channel Configuration returned to the CM in a REG-RSP message. A CMTS may require configuration of all pertinent Receive Module and Receive Channel instances in order to register a CM that reports a Receive Channel Profile (RCP), including any standard Receive Channel Profiles. If the CM reports multiple RCPs, and Receive Module and Receive Channel objects have instances for more than one RCP, the particular RCP selected by the CMTS is not specified. A CMTS is not restricted to assigning Receive Modules based only on the contents of this object. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChIfIndex attribute to be set and a valid reference of a RccCfg instance. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RxChCfgEntry | |||
| docsIf3RxChCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.8.1 | ||
| The conceptual row of docsIf3RxChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances of ReceiveChannelCfg across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3RxChCfgEntry | |||
| docsIf3RxChCfgRcId | 1.3.6.1.4.1.4491.2.1.20.1.8.1.1 | ||
| This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3RxChCfgChIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.8.1.2 | ||
| This attribute contains the interface index of a Downstream Channel that this Receive Channel Instance defines. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3RxChCfgPrimaryDsIndicator | 1.3.6.1.4.1.4491.2.1.20.1.8.1.3 | ||
| If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the downstream channel is to be a non-primary-capable channel. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3RxChCfgRcRmConnectivityId | 1.3.6.1.4.1.4491.2.1.20.1.8.1.4 | ||
| This attribute indicates the Receive Module (via the RmId from the ReceiveModule object) to which this Receive Channel connects. If this object contains a zero value (and thus no Receive Channel Connectivity), the Receive Channel Connectivity TLV is omitted from the RCC. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3RxChCfgRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.8.1.5 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3RxChStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.9 | ||
| The Receive Channel Status object reports the status of the statically-configured and dynamically-created Receive Channels within an RCC. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RxChStatusEntry | |||
| docsIf3RxChStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.9.1 | ||
| The conceptual row of docsIf3RxChStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defined on the CM, the value of RccStatusId is always 1. | |||
| OBJECT-TYPE | |||
| DocsIf3RxChStatusEntry | |||
| docsIf3RxChStatusRcId | 1.3.6.1.4.1.4491.2.1.20.1.9.1.1 | ||
| This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3RxChStatusChIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.9.1.2 | ||
| This attribute contains the interface index of the Downstream Channel that this Receive Channel Instance defines. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3RxChStatusPrimaryDsIndicator | 1.3.6.1.4.1.4491.2.1.20.1.9.1.3 | ||
| If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the downstream channel is to be a non-primary-capable channel. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3RxChStatusRcRmConnectivityId | 1.3.6.1.4.1.4491.2.1.20.1.9.1.4 | ||
| This attribute identifies the Receive Module to which this Receive Channel connects. A value a zero indicates that the Receive Channel Connectivity TLV is omitted from the RCC. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3RxModuleCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.10 | ||
| The Receive Module Configuration object permits an operator to configure how CMs with certain Receive Channel Profiles (RCPs) will configure the Receive Modules within their profile upon CM registration. When a CM registers with an RCP for which all Receive Module Indices (RmIds) are configured in this object and all Receive Channels are configured within the Receive Channel (ReceiveChannel) object, the CMTS should use the configuration within these objects to set the Receive Channel Configuration assigned to the CM in a REG-RSP message. A CMTS may require configuration of all pertinent Receive Module and Receive Channel instances (i.e., MIB table entries) in order to register a CM that reports a Receive Channel Profile. If the CM reports multiple RCPs, and Receive Module and Receive Channel objects have instances (i.e., MIB table entries) for more than one RCP reported by the CM, the particular RCP selected by the CMTS is not specified. A CMTS is not restricted to assigning Receive Modules based only on the contents of this object. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the reference of a valid RccCfg instance. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RxModuleCfgEntry | |||
| docsIf3RxModuleCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.10.1 | ||
| The conceptual row of docsIf3RxModuleCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. | |||
| OBJECT-TYPE | |||
| DocsIf3RxModuleCfgEntry | |||
| docsIf3RxModuleCfgRmId | 1.3.6.1.4.1.4491.2.1.20.1.10.1.1 | ||
| This key represents an identifier of a Receive Module instance within the Receive Channel Profile. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3RxModuleCfgRmRmConnectivityId | 1.3.6.1.4.1.4491.2.1.20.1.10.1.2 | ||
| This attribute represents the higher level (i.e. closer to RF) Receive Module to which this Receive Module connects. If this object contains a zero value (and thus no Receive Module Connectivity), the Receive Module Connectivity TLV is omitted from the RCC. Within a single instance of the ReceiveModule object, the RmRmConnectivityId attribute cannot contain the same value as the RmId attribute. The RmRmConnectivityId attribute points to a separate ReceiveModule object instance with the same value of RccCfgId. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3RxModuleCfgFirstCenterFrequency | 1.3.6.1.4.1.4491.2.1.20.1.10.1.3 | ||
| This attribute represents the center frequency, in Hz, and a multiple of 62500, that indicates the lowest frequency channel of the Receive Module, or 0 if not applicable to the Receive Module. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3RxModuleCfgRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.10.1.4 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3RxModuleStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.11 | ||
| The Receive Module Status object provides a read-only view of the statically configured and dynamically created Receive Modules within an RCC. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3RxModuleStatusEntry | |||
| docsIf3RxModuleStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.11.1 | ||
| The conceptual row of docsIf3RxModuleStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defined on the CM, the value of RccStatusId is always 1. | |||
| OBJECT-TYPE | |||
| DocsIf3RxModuleStatusEntry | |||
| docsIf3RxModuleStatusRmId | 1.3.6.1.4.1.4491.2.1.20.1.11.1.1 | ||
| This key represents an identifier of a Receive Module instance within the Receive Channel Profile. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3RxModuleStatusRmRmConnectivityId | 1.3.6.1.4.1.4491.2.1.20.1.11.1.2 | ||
| This attribute represents the Receive Module to which this Receive Module connects. Requirements for module connectivity are detailed in the RmRmConnectivityId of the RccCfg object. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3RxModuleStatusFirstCenterFrequency | 1.3.6.1.4.1.4491.2.1.20.1.11.1.3 | ||
| This attribute represents the low frequency channel of the Receive Module, or 0 if not applicable to the Receive Module. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3MdNodeStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.12 | ||
| This object reports the MD-DS-SG-ID and MD-US-SG-ID associated with a MD-CM-SG-ID within a MAC Domain and the Fiber Nodes reached by the MD-CM-SG. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdNodeStatusEntry | |||
| docsIf3MdNodeStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.12.1 | ||
| The conceptual row of docsIf3MdNodeStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-CM-SG-ID is configured. | |||
| OBJECT-TYPE | |||
| DocsIf3MdNodeStatusEntry | |||
| docsIf3MdNodeStatusNodeName | 1.3.6.1.4.1.4491.2.1.20.1.12.1.1 | ||
| This key represents the name of a fiber node associated with a MD-CM-SG of a MAC Domain. | |||
| OBJECT-TYPE | |||
| NodeName | SIZE(1..16) | ||
| docsIf3MdNodeStatusMdCmSgId | 1.3.6.1.4.1.4491.2.1.20.1.12.1.2 | ||
| This attribute is a key and indicates the MD-CM-SG-ID of this instance. A particular MdCmSgId in a MAC Domain is associated with one or more Fiber Nodes. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| docsIf3MdNodeStatusMdDsSgId | 1.3.6.1.4.1.4491.2.1.20.1.12.1.3 | ||
| This attribute corresponds to the MD-DS-SG-ID of the MD-CM-SG of this object instance. The MdDsSgId values are unique within a MAC Domain. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3MdNodeStatusMdUsSgId | 1.3.6.1.4.1.4491.2.1.20.1.12.1.4 | ||
| This attribute corresponds to the MD-US-SG-ID of the MD-CM-SG of this object instance. The MdUsSgId values are unique within a MAC Domain. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3MdDsSgStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.13 | ||
| This object returns the list of downstream channel associated with a MAC Domain MD-DS-SG-ID. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdDsSgStatusEntry | |||
| docsIf3MdDsSgStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.13.1 | ||
| The conceptual row of docsIf3MdDsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not required to persist instances of this object across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3MdDsSgStatusEntry | |||
| docsIf3MdDsSgStatusMdDsSgId | 1.3.6.1.4.1.4491.2.1.20.1.13.1.1 | ||
| This key represents a MD-DS-SG-ID in a Mac Domain. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3MdDsSgStatusChSetId | 1.3.6.1.4.1.4491.2.1.20.1.13.1.2 | ||
| This attribute represents a reference to the list of downstream channels of the MD-DS-SG-ID. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3MdUsSgStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.14 | ||
| This object returns the list of upstream channels associated with a MAC Domain MD-US-SG-ID. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdUsSgStatusEntry | |||
| docsIf3MdUsSgStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.14.1 | ||
| The conceptual row of docsIf3MdUsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not required to persist instances of this object across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3MdUsSgStatusEntry | |||
| docsIf3MdUsSgStatusMdUsSgId | 1.3.6.1.4.1.4491.2.1.20.1.14.1.1 | ||
| This key represents a MD-US-SG-ID in a Mac Domain. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..255 | ||
| docsIf3MdUsSgStatusChSetId | 1.3.6.1.4.1.4491.2.1.20.1.14.1.2 | ||
| This attribute represents a reference to the list of upstream channels of the MD-US-SG-ID. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3MdUsToDsChMappingTable | 1.3.6.1.4.1.4491.2.1.20.1.15 | ||
| This object returns the set of downstream channels that carry UCDs and MAPs for a particular upstream channel in a MAC Domain. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdUsToDsChMappingEntry | |||
| docsIf3MdUsToDsChMappingEntry | 1.3.6.1.4.1.4491.2.1.20.1.15.1 | ||
| The conceptual row of docsIf3MdUsToDsChMappingTable. | |||
| OBJECT-TYPE | |||
| DocsIf3MdUsToDsChMappingEntry | |||
| docsIf3MdUsToDsChMappingUsIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.15.1.1 | ||
| This key represents the interface index of the upstream channel to which this instance applies. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3MdUsToDsChMappingDsIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.15.1.2 | ||
| This key represents the interface index of a downstream channel carrying in UCDs and Maps associated with the upstream channel defined by this instance. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3MdUsToDsChMappingMdIfIndex | 1.3.6.1.4.1.4491.2.1.20.1.15.1.3 | ||
| This key represents the MAC domain of the upstream and downstream channels of this instance. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| docsIf3MdCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.16 | ||
| This object contains MAC domain level control and configuration attributes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3MdCfgEntry | |||
| docsIf3MdCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.16.1 | ||
| The conceptual row of docsIf3MdCfgTable. The CMTS persists all instances of MdCfg across reinitializations. The ifIndex key corresponds to the MAC Domain interface. | |||
| OBJECT-TYPE | |||
| DocsIf3MdCfgEntry | |||
| docsIf3MdCfgMddInterval | 1.3.6.1.4.1.4491.2.1.20.1.16.1.1 | ||
| This attribute configures the interval for the insertion of MDD messages in each downstream channel of a MAC Domain. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..2000 | ||
| docsIf3MdCfgIpProvMode | 1.3.6.1.4.1.4491.2.1.20.1.16.1.2 | ||
| This attribute configures the CMTS IP provisioning mode for a MAC Domain. When this attribute is set to 'ipv4Only' the CM will acquire a single IPv4 address for the CM management stack. When this attribute is set to 'ipv6Only' the CM will acquire a single IPv6 address for the CM management stack. When this attribute is set to 'alternate' the CM will acquire a single IPv6 address for the CM management stack and, if failures occur, the CM will fall back to provision and operation with an IPv4 address. When this attribute is set to 'dualStack' the CM will acquire both an IPv6 and IPv4 address for provisioning and operation. | |||
| OBJECT-TYPE | |||
| INTEGER | ipv4Only(0), ipv6Only(1), alternate(2), dualStack(3) | ||
| docsIf3MdCfgCmStatusEvCtlEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.3 | ||
| If set to 'true', this attribute enables the signaling of the CM-Status Event reporting mechanism. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgUsFreqRange | 1.3.6.1.4.1.4491.2.1.20.1.16.1.4 | ||
| This attribute indicates in MDD messages the upstream frequency upper band edge of an upstream Channel. A value 'standard' means Standard Frequency Range and a value 'extended' means Extended Frequency Range. | |||
| OBJECT-TYPE | |||
| INTEGER | standard(0), extended(1) | ||
| docsIf3MdCfgMcastDsidFwdEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.5 | ||
| If set to 'true', this attribute enables the CMTS to use IP Multicast DSID Forwarding (MDF) for the MAC domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgMultRxChModeEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.6 | ||
| If set to 'true', this attribute enables Downstream Channel Bonding for the MAC Domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgMultTxChModeEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.7 | ||
| If set to 'true', this attribute enables Multiple Transmit Channel (MTC) Mode for the MAC Domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgEarlyAuthEncrCtrl | 1.3.6.1.4.1.4491.2.1.20.1.16.1.8 | ||
| This attribute enables or disables early authentication and encryption (EAE) signaling for the MAC Domain. It also defines the type of EAE enforcement in the case that EAE is enabled. If set to 'disableEAE', EAE is disabled for the MAC Domain. If set to 'enableEaeRangingBasedEnforcement', 'enableEaeCapabilityBasedEnforcement' or 'enableEaeTotalEnforcement', EAE is enabled for the MAC Domain. The following EAE enforcement methods are defined in the case where EAE signaling is enabled: The option 'enableEaeRangingBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message. The option 'enableEaeCapabilityBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message in which the EAE capability flag is set. The option 'enableEaeTotalEnforcement' indicates EAE is enforced on all CMs regardless of their EAE capabilities. | |||
| OBJECT-TYPE | |||
| INTEGER | disableEae(1), enableEaeRangingBasedEnforcement(2), enableEaeCapabilityBasedEnforcement(3), enableEaeTotalEnforcement(4) | ||
| docsIf3MdCfgTftpProxyEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.9 | ||
| If set to 'true', this attribute enables TFTP Proxy functionality for the MAC Domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgSrcAddrVerifEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.10 | ||
| If set to 'true', this attribute enables Source Address Verification (SAV) functionality for the MAC Domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgDownChannelAnnex | 1.3.6.1.4.1.4491.2.1.20.1.16.1.11 | ||
| This attribute defines the ITU-J-83 Annex being used for this MAC Domain. The value of this attribute indicates the conformance of the implementation to important regional cable standards. Valid enumerations for the attribute are: unknown other annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83 is used. Values 6-255 are reserved. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), other(2), annexA(3), annexB(4), annexC(5) | ||
| docsIf3MdCfgCmUdcEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.12 | ||
| If set to 'true', this attribute instructs the CMTS MAC Domain to enable Upstream Drop Classifiers (UDC) for the CMs attempting registration in this MAC Domain. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgSendUdcRulesEnabled | 1.3.6.1.4.1.4491.2.1.20.1.16.1.13 | ||
| If set to 'true' and when the CM signals to the CMTS 'Upstream Drop Classifier Group ID' encodings, this attribute instructs the CMTS MAC Domain to send the Subscriber Management Filters rules associated with the 'Upstream Drop Classifier Group ID' encodings to the CM in the form of UDCs when the following conditions occurs: - The attribute CmUdcEnabled value for this MAC Domain is set to 'true', and - The CM has the UDC capability advertised as supported. If there is no a single Subscriber Management Filter configured in the CMTS for the CM's signaled UDC Group ID, the CMTS does not send UDC encodings to the CM. It is vendor specific whether the CMTS maintains enforcement of the CM signaled or default Subscriber Management Filter groups in the upstream direction. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3MdCfgServiceTypeIdList | 1.3.6.1.4.1.4491.2.1.20.1.16.1.14 | ||
| This attribure indicates the list of Service Type IDs associated with the MAC Domain. During the CM registration process the CMTS will attempt to redirect the CM to a MAC Domain where the CM' Service Type TLV is contained in this attribute. | |||
| OBJECT-TYPE | |||
| SnmpTagList | |||
| docsIf3BondingGrpCfgTable | 1.3.6.1.4.1.4491.2.1.20.1.17 | ||
| This object defines statically configured Downstream Bonding Groups and Upstream Bonding Groups on the CMTS. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChList attribute to be set. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3BondingGrpCfgEntry | |||
| docsIf3BondingGrpCfgEntry | 1.3.6.1.4.1.4491.2.1.20.1.17.1 | ||
| The conceptual row of docsIf3BondingGrpCfgTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. The CMTS persists all instances of BondingGrpCfg across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3BondingGrpCfgEntry | |||
| docsIf3BondingGrpCfgDir | 1.3.6.1.4.1.4491.2.1.20.1.17.1.1 | ||
| This attribute defines the ordered list of channels that comprise the channel set | |||
| OBJECT-TYPE | |||
| IfDirection | |||
| docsIf3BondingGrpCfgCfgId | 1.3.6.1.4.1.4491.2.1.20.1.17.1.2 | ||
| This key represents the configured bonding group identifier in the indicated direction for the MAC Domain. This attribute is used for the sole purpose of tracking bonding groups defined by management systems. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| docsIf3BondingGrpCfgChList | 1.3.6.1.4.1.4491.2.1.20.1.17.1.3 | ||
| This attribute contains the list of channels of the bonding group. | |||
| OBJECT-TYPE | |||
| ChannelList | SIZE(2..255) | ||
| docsIf3BondingGrpCfgSfProvAttrMask | 1.3.6.1.4.1.4491.2.1.20.1.17.1.4 | ||
| This attribute represents the Provisioned Attribute Mask encoding for the bonding group. | |||
| OBJECT-TYPE | |||
| AttributeMask | |||
| docsIf3BondingGrpCfgDsidReseqWaitTime | 1.3.6.1.4.1.4491.2.1.20.1.17.1.5 | ||
| For a Downstream Bonding Group, this attribute provides the DSID Resequencing Wait Time that is to be used for all DSIDs associated with this Downstream Bonding Group. The value of 255 indicates that the DSID Resequencing Wait Time is determined by the CMTS. The value zero in not supported for downstream bonding groups. For an Upstream Bonding Group, this attribute has no meaning and returns the value 0. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0 | 1..180 | 255 | ||
| docsIf3BondingGrpCfgDsidReseqWarnThrshld | 1.3.6.1.4.1.4491.2.1.20.1.17.1.6 | ||
| For a Downstream Bonding Group, this attribute provides the DSID Resequencing Warning Threshold that is to be used for all DSIDs associated with this Downstream Bonding Group. The value of 255 indicates that the DSID Resequencing Warning Threshold is determined by the CMTS. The value of 0 indicates that the threshold warnings are disabled. When the value of DsidReseqWaitTime is not equal to 0 or 255, the CMTS must ensure that the value of this object is either 255 or less than the value of DsidReseqWaitTime. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..179 | 255 | ||
| docsIf3BondingGrpCfgRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.17.1.7 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3DsBondingGrpStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.18 | ||
| This object returns administratively-configured and CMTS defined downstream bonding groups. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3DsBondingGrpStatusEntry | |||
| docsIf3DsBondingGrpStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.18.1 | ||
| The conceptual row of docsIf3DsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. | |||
| OBJECT-TYPE | |||
| DocsIf3DsBondingGrpStatusEntry | |||
| docsIf3DsBondingGrpStatusChSetId | 1.3.6.1.4.1.4491.2.1.20.1.18.1.1 | ||
| This key represents the identifier for the Downstream Bonding Group or the single-downstream channel of this instance. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3DsBondingGrpStatusMdDsSgId | 1.3.6.1.4.1.4491.2.1.20.1.18.1.2 | ||
| This attribute corresponds to the MD-DS-SG-ID that includes all the downstream channels of the Downstream Bonding Group. The value zero indicates that the bonding group does not contain channels from a single MD-DS-SG and therefore the bonding group is not valid and usable. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3DsBondingGrpStatusCfgId | 1.3.6.1.4.1.4491.2.1.20.1.18.1.3 | ||
| This attribute provides the BondingGrpCfgId for the downstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS will define the bonding group. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| docsIf3UsBondingGrpStatusTable | 1.3.6.1.4.1.4491.2.1.20.1.19 | ||
| This object returns administratively-configured and CMTS-defined upstream bonding groups. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3UsBondingGrpStatusEntry | |||
| docsIf3UsBondingGrpStatusEntry | 1.3.6.1.4.1.4491.2.1.20.1.19.1 | ||
| The conceptual row of docsIf3UsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. | |||
| OBJECT-TYPE | |||
| DocsIf3UsBondingGrpStatusEntry | |||
| docsIf3UsBondingGrpStatusChSetId | 1.3.6.1.4.1.4491.2.1.20.1.19.1.1 | ||
| This key represents the identifier for the Upstream Bonding Group or the single-upstream channel of this instance. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3UsBondingGrpStatusMdUsSgId | 1.3.6.1.4.1.4491.2.1.20.1.19.1.2 | ||
| This attribute corresponds to the MD-US-SG-ID that includes all the upstream channels of the Upstream Bonding Group. The value zero indicates that the bonding group does not contain channels from a single MD-US-SG and therefore the bonding group is not valid and usable. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| docsIf3UsBondingGrpStatusCfgId | 1.3.6.1.4.1.4491.2.1.20.1.19.1.3 | ||
| This attribute provides the BondingGrpCfgId for the upstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS defines the bonding group. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| docsIf3UsChExtTable | 1.3.6.1.4.1.4491.2.1.20.1.20 | ||
| This object defines management extensions for upstream channels, in particular SCDMA parameters. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3UsChExtEntry | |||
| docsIf3UsChExtEntry | 1.3.6.1.4.1.4491.2.1.20.1.20.1 | ||
| The conceptual row of docsIf3UsChExtTable. The ifIndex key corresponds to each of the upstream channels. | |||
| OBJECT-TYPE | |||
| DocsIf3UsChExtEntry | |||
| docsIf3UsChExtSacCodeHoppingSelectionMode | 1.3.6.1.4.1.4491.2.1.20.1.20.1.1 | ||
| This attribute indicates the selection mode for active codes and code hopping. 'none' Non-SCDMA channel 'sac1NoCodeHopping' Selectable active codes mode 1 and code hopping disabled 'sac1CodeHoppingMode1' Selectable active codes mode 1 and code hopping mode 1 'sac2CodeHoppingMode2' Selectable active codes mode 2 and code hopping mode 2 'sac2NoCodeHopping' Selectable active codes mode 2 and code hopping disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), sac1NoCodeHopping(1), sac1CodeHoppingMode1(2), sac2CodeHoppingMode2(3), sac2NoCodeHopping(4) | ||
| docsIf3UsChExtScdmaSelectionStringActiveCodes | 1.3.6.1.4.1.4491.2.1.20.1.20.1.2 | ||
| This attribute represents the active codes of the upstream channel and it is applicable only when SacCodeHoppingSelectionMode is 'sac2CodeHoppingMode2. | |||
| OBJECT-TYPE | |||
| ScdmaSelectionString | |||
| docsIf3CmCapabilities | 1.3.6.1.4.1.4491.2.1.20.1.21 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmCapabilitiesReq | 1.3.6.1.4.1.4491.2.1.20.1.21.1 | ||
| This attribute contains the TLV encoding for TLV-5 sent in a REG-REQ. The first byte of this encoding is expected to be '05'H. | |||
| OBJECT-TYPE | |||
| Tlv8 | |||
| docsIf3CmCapabilitiesRsp | 1.3.6.1.4.1.4491.2.1.20.1.21.2 | ||
| This attribute contains the TLV encoding for TLV-5 received in a REG-RSP. The first byte of this encoding is expected to be '05'H. | |||
| OBJECT-TYPE | |||
| Tlv8 | |||
| docsIf3UsChSetTable | 1.3.6.1.4.1.4491.2.1.20.1.22 | ||
| This object defines a set of upstream channels. These channel sets may be associated with channel bonding groups, MD-US-SGs, MD-CM-SGs, or any other channel set that the CMTS may derive from other CMTS processes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3UsChSetEntry | |||
| docsIf3UsChSetEntry | 1.3.6.1.4.1.4491.2.1.20.1.22.1 | ||
| The conceptual row of docsIf3UsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the upstream channel set is defined. | |||
| OBJECT-TYPE | |||
| DocsIf3UsChSetEntry | |||
| docsIf3UsChSetId | 1.3.6.1.4.1.4491.2.1.20.1.22.1.1 | ||
| This key defines a reference identifier for the upstream channel set within the MAC Domain. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3UsChSetChList | 1.3.6.1.4.1.4491.2.1.20.1.22.1.2 | ||
| This attribute defines the ordered list of channels that comprise the upstream channel set | |||
| OBJECT-TYPE | |||
| ChannelList | SIZE(0 | 2..255) | ||
| docsIf3DsChSetTable | 1.3.6.1.4.1.4491.2.1.20.1.23 | ||
| This object defines a set of downstream channels. These channel sets may be associated with channel bonding groups, MD-DS-SGs, MD-CM-SGs, or any other channel set that the CMTS may derive from other CMTS processes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3DsChSetEntry | |||
| docsIf3DsChSetEntry | 1.3.6.1.4.1.4491.2.1.20.1.23.1 | ||
| The conceptual row of docsIf3DsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the downstream channel set is defined. | |||
| OBJECT-TYPE | |||
| DocsIf3DsChSetEntry | |||
| docsIf3DsChSetId | 1.3.6.1.4.1.4491.2.1.20.1.23.1.1 | ||
| This key defines a reference identifier for the downstream channel set within the MAC Domain. | |||
| OBJECT-TYPE | |||
| ChSetId | |||
| docsIf3DsChSetChList | 1.3.6.1.4.1.4491.2.1.20.1.23.1.2 | ||
| This attribute defines the ordered list of channels that comprise the downstream channel set. | |||
| OBJECT-TYPE | |||
| ChannelList | SIZE(0 | 2..255) | ||
| docsIf3SignalQualityExtTable | 1.3.6.1.4.1.4491.2.1.20.1.24 | ||
| This object provides an in-channel received modulation error ratio metric for CM and CMTS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3SignalQualityExtEntry | |||
| docsIf3SignalQualityExtEntry | 1.3.6.1.4.1.4491.2.1.20.1.24.1 | ||
| The conceptual row of docsIf3SignalQualityExtTable. The ifIndex key corresponds to each of the upstream channels. | |||
| OBJECT-TYPE | |||
| DocsIf3SignalQualityExtEntry | |||
| docsIf3SignalQualityExtRxMER | 1.3.6.1.4.1.4491.2.1.20.1.24.1.1 | ||
| RxMER provides an in-channel received Modulation Error Ratio (MER). RxMER is defined as an estimate, provided by the demodulator, of the ratio: (average constellation energy with equally likely symbols) / (average squared magnitude of error vector) RxMER is measured just prior to FEC (trellis/Reed-Solomon) decoding. RxMER includes the effects of the HFC channel as well as implementation effects of the modulator and demodulator. Error vector estimation may vary among demodulator implementations. The CMTS RxMER is averaged over a given number of bursts at the burst receiver, which may correspond to transmissions from multiple users. In the case of S-CDMA mode, RxMER is measured on the de-spread signal. | |||
| OBJECT-TYPE | |||
| TenthdB | -2147483648..2147483647 | ||
| docsIf3SignalQualityExtRxMerSamples | 1.3.6.1.4.1.4491.2.1.20.1.24.1.2 | ||
| RxMerSamples is a statistically significant number of symbols for the CM, or bursts for the CMTS, processed to arrive at the RxMER value. For the CMTS, the MER measurement includes only valid bursts that are not in contention regions. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsSignalQualityExtTable | 1.3.6.1.4.1.4491.2.1.20.1.25 | ||
| This object provides metrics and parameters associated with received carrier, noise and interference power levels in the upstream channels of the CMTS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmtsSignalQualityExtEntry | |||
| docsIf3CmtsSignalQualityExtEntry | 1.3.6.1.4.1.4491.2.1.20.1.25.1 | ||
| The conceptual row of docsIf3CmtsSignalQualityExtTable. The ifIndex key corresponds to each of the upstream channels. The CMTS persists the configured values of all instances of CmtsSignalQualityExt across reinitialization. | |||
| OBJECT-TYPE | |||
| DocsIf3CmtsSignalQualityExtEntry | |||
| docsIf3CmtsSignalQualityExtCNIR | 1.3.6.1.4.1.4491.2.1.20.1.25.1.1 | ||
| This attribute provides an upstream in-channel Carrier-to-Noise plus Interference Ratio (CNIR). CNIR is defined as the ratio of the expected commanded received signal power at the CMTS input, assuming QPSK0 modulation, to the noise plus interference in the channel. This measurement occurs prior to the point at which the desired CM signal, when present, is demodulated. The measurement includes the effect of the receive matched filter but does not include the effect of any ingress filtering. Both the signal power and noise/interference power are referenced to the same point, e.g., CMTS input. | |||
| OBJECT-TYPE | |||
| TenthdB | |||
| docsIf3CmtsSignalQualityExtExpectedRxSignalPower | 1.3.6.1.4.1.4491.2.1.20.1.25.1.2 | ||
| ExpectedReceivedSignalPower is the power of the expected commanded received signal in the channel, referenced to the CMTS input. | |||
| OBJECT-TYPE | |||
| TenthdBmV | |||
| docsIf3CmtsSpectrumAnalysisMeasTable | 1.3.6.1.4.1.4491.2.1.20.1.26 | ||
| This object is used to configure the logical upstream interfaces to perform the spectrum measurements. This object supports creation and deletion of instances. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmtsSpectrumAnalysisMeasEntry | |||
| docsIf3CmtsSpectrumAnalysisMeasEntry | 1.3.6.1.4.1.4491.2.1.20.1.26.1 | ||
| The conceptual row of docsIf3CmtsSpectrumAnalysisMeasTable. The ifIndex key corresponds to each of the upstream channels. The CMTS is not required to persist instances of this object across reinitializations. | |||
| OBJECT-TYPE | |||
| DocsIf3CmtsSpectrumAnalysisMeasEntry | |||
| docsIf3CmtsSpectrumAnalysisMeasAmplitudeData | 1.3.6.1.4.1.4491.2.1.20.1.26.1.1 | ||
| This attribute provides a list of the spectral amplitudes corresponding to the frequency bins ordered from lowest to highest frequencies covering the frequency span. Information about the center frequency, frequency span, number of bins and resolution bandwidth are included to provide context to the measurement point The CMTS must support the number of bins as an odd number in order to provide a spectrum representation that is symmetric about the middle data point or bin. The CMTS must support a number of bins greater than or equal to 257 for frequency spans greater than or equal to 6.4 MHz. The CMTS must not exceed 25 kHz bin spacing for measurement of frequency spans less than or equal to 6.4 MHz. The bins measurements are updated periodically at time intervals given by the TimeInterval attribute. | |||
| OBJECT-TYPE | |||
| AmplitudeData | |||
| docsIf3CmtsSpectrumAnalysisMeasTimeInterval | 1.3.6.1.4.1.4491.2.1.20.1.26.1.2 | ||
| TimeInterval is the CMTS estimated average repetition period of measurements. This attribute defines the average rate at which new spectra can be retrieved. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsSpectrumAnalysisMeasRowStatus | 1.3.6.1.4.1.4491.2.1.20.1.26.1.3 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3CmtsCmCtrl | 1.3.6.1.4.1.4491.2.1.20.1.27 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmtsCmCtrlCmdMacAddr | 1.3.6.1.4.1.4491.2.1.20.1.27.1 | ||
| This attribute represents the MAC Address of the CM which the CMTS is instructed to send the CM-CTRL-REQ message. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| docsIf3CmtsCmCtrlCmdMuteUsChId | 1.3.6.1.4.1.4491.2.1.20.1.27.2 | ||
| This attribute represents the Upstream Channel ID (UCID) to mute or unmute. A value of zero indicates all upstream channels. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'mute'. | |||
| OBJECT-TYPE | |||
| ChId | |||
| docsIf3CmtsCmCtrlCmdMuteInterval | 1.3.6.1.4.1.4491.2.1.20.1.27.3 | ||
| This attribute represents the length of time that the mute operation is in effect. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'mute'. A value of 0 is an indication to unmute the channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId attribute while a value of 0xFFFFFFFF is used to mute the channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId attribute indefinitely. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsCmCtrlCmdDisableForwarding | 1.3.6.1.4.1.4491.2.1.20.1.27.4 | ||
| When set to 'true', this attribute disables data forwarding to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. When set to 'false', this attribute enables data forwarding to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| docsIf3CmtsCmCtrlCmdCommit | 1.3.6.1.4.1.4491.2.1.20.1.27.5 | ||
| This attribute indicates the type of command for the CMTS to trigger in the CM-CTRL-REQ message. This attribute will return the value of the last operation performed or the default value if no operation has been performed. | |||
| OBJECT-TYPE | |||
| INTEGER | mute(1), cmReinit(2), disableForwarding(3) | ||
| docsIf3CmDpvStatsTable | 1.3.6.1.4.1.4491.2.1.20.1.28 | ||
| This object represents the DOCSIS Path Verify Statistics collected in the cable modem device. The CMTS controls the logging of DPV statistics in the cable modem. Therefore the context and nature of the measurements are governed by the CMTS and not self-descriptive when read from the CM. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmDpvStatsEntry | |||
| docsIf3CmDpvStatsEntry | 1.3.6.1.4.1.4491.2.1.20.1.28.1 | ||
| The conceptual row of docsIf3CmDpvStatsTable. | |||
| OBJECT-TYPE | |||
| DocsIf3CmDpvStatsEntry | |||
| docsIf3CmDpvStatsGrpId | 1.3.6.1.4.1.4491.2.1.20.1.28.1.1 | ||
| This key represents the DPV Group ID. The CM reports two instance of DPV statistics per downstream normally referred as Statistical Group 1 and Statistical Group 2. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..2 | ||
| docsIf3CmDpvStatsLastMeasLatency | 1.3.6.1.4.1.4491.2.1.20.1.28.1.2 | ||
| This attrtibute represents the last latency measurement for this statistical group. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmDpvStatsLastMeasTime | 1.3.6.1.4.1.4491.2.1.20.1.28.1.3 | ||
| This attribute represents the last measurement time of the last latency measurement for this statistical group. This attribute reports the EPOC time value when no measurements are being reported or after the statistics were cleared. | |||
| OBJECT-TYPE | |||
| DateAndTime | |||
| docsIf3CmDpvStatsMinLatency | 1.3.6.1.4.1.4491.2.1.20.1.28.1.4 | ||
| This attribute represents the minimum latency measurement for this statistical group since the last time statistics were cleared. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmDpvStatsMaxLatency | 1.3.6.1.4.1.4491.2.1.20.1.28.1.5 | ||
| This attribute represents the maximum latency measurement for this statistical group since the last time statistics were cleared. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmDpvStatsAvgLatency | 1.3.6.1.4.1.4491.2.1.20.1.28.1.6 | ||
| This attribute represents the average latency measurement for this statistical group since the last time statistics were cleared. The averaging mechanism is controlled by the CMTS, and can be a simple average (mean) or an exponential moving average. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmDpvStatsNumMeas | 1.3.6.1.4.1.4491.2.1.20.1.28.1.7 | ||
| This attribure represents the number of latency measurements made for this statistical group since the last time statistics were cleared. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmDpvStatsLastClearTime | 1.3.6.1.4.1.4491.2.1.20.1.28.1.8 | ||
| This attribute represents the last time statistics were cleared for this statistical group. | |||
| OBJECT-TYPE | |||
| DateAndTime | |||
| docsIf3CmEventCtrlTable | 1.3.6.1.4.1.4491.2.1.20.1.29 | ||
| This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: o The CmEventCtrl object has no instances Events are sent to Local Log depending on the settings of the docsDevEvReporting object. Settings in the DocsDevEvReporting for other dispatch mechanisms are treated as disable. o The CmEventCtrl object contains configured instances Only events matching the Event Ids configured in the object are sent according to the settings of the docsDevEvReporting object. o The CmEventCtrl object contains an instance with Event Id 0 All events matching the Local Log settings of docsDevEvReporting are sent to local log. Events matching the Event Ids configured in the docsDevEvReporting and CmEventCtrl objects are delivered to dispatch mechanisms other than Local Log. The CM does not persist instances of CmEventCtrl across reinitializations. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmEventCtrlEntry | |||
| docsIf3CmEventCtrlEntry | 1.3.6.1.4.1.4491.2.1.20.1.29.1 | ||
| The conceptual row of docsIf3CmEventCtrlTable. | |||
| OBJECT-TYPE | |||
| DocsIf3CmEventCtrlEntry | |||
| docsIf3CmEventCtrlEventId | 1.3.6.1.4.1.4491.2.1.20.1.29.1.1 | ||
| This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g. syslog). | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmEventCtrlStatus | 1.3.6.1.4.1.4491.2.1.20.1.29.1.2 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3CmtsEventCtrlTable | 1.3.6.1.4.1.4491.2.1.20.1.30 | ||
| This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: o The CmtsEventCtrl object has no instances Events are sent to Local Log depending on the settings of the docsDevEvReporting object. Settings in the DocsDevEvReporting for other dispatch mechanisms are treated as disable. o The CmtsEventCtrl object contains configured instances Only events matching the Event Ids configured in the object are sent according to the settings of the docsDevEvReporting object. o The CmtsEventCtrl object contains an instance with Event Id 0 All events matching the Local Log settings of docsDevEvReporting are sent to local log. Events matching the Event Ids configured in the docsDevEvReporting and CmtsEventCtrl objects are delivered to dispatch mechanisms other than Local Log. The CMTS persists all instances of CmtsEventCtrl across reinitializations. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DocsIf3CmtsEventCtrlEntry | |||
| docsIf3CmtsEventCtrlEntry | 1.3.6.1.4.1.4491.2.1.20.1.30.1 | ||
| The conceptual row of docsIf3CmtsEventCtrlTable. | |||
| OBJECT-TYPE | |||
| DocsIf3CmtsEventCtrlEntry | |||
| docsIf3CmtsEventCtrlEventId | 1.3.6.1.4.1.4491.2.1.20.1.30.1.1 | ||
| This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g. syslog). | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| docsIf3CmtsEventCtrlStatus | 1.3.6.1.4.1.4491.2.1.20.1.30.1.2 | ||
| The status of this instance. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| docsIf3MibConformance | 1.3.6.1.4.1.4491.2.1.20.2 | ||
| OBJECT IDENTIFIER | |||
| docsIf3MibCompliances | 1.3.6.1.4.1.4491.2.1.20.2.1 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmtsCompliance | 1.3.6.1.4.1.4491.2.1.20.2.1.1 | ||
| The compliance statement for the CMTS. | |||
| MODULE-COMPLIANCE | |||
| docsIf3CmCompliance | 1.3.6.1.4.1.4491.2.1.20.2.1.2 | ||
| The compliance statement for the CM. | |||
| MODULE-COMPLIANCE | |||
| docsIf3MibGroups | 1.3.6.1.4.1.4491.2.1.20.2.2 | ||
| OBJECT IDENTIFIER | |||
| docsIf3CmtsGroup | 1.3.6.1.4.1.4491.2.1.20.2.2.1 | ||
| Group of objects implemented in the CMTS | |||
| OBJECT-GROUP | |||
| docsIf3CmGroup | 1.3.6.1.4.1.4491.2.1.20.2.2.2 | ||
| Group of objects implemented in the CM | |||
| OBJECT-GROUP | |||
| docsIf3CmtsNotificationGroup | 1.3.6.1.4.1.4491.2.1.20.2.2.3 | ||
| CMTS is required to support notifications in this group | |||
| NOTIFICATION-GROUP | |||
| docsIf3CmNotificationGroup | 1.3.6.1.4.1.4491.2.1.20.2.2.4 | ||
| CM is required to support notifications in this group | |||
| NOTIFICATION-GROUP | |||
| CmRegState | |||
| This data type defines the CM connectivity state as reported by the CM. The enumerated values associated with the CmRegState are: 'other' indicates any state not described below. 'notReady' indicates that the CM has not started the registration process yet. 'notSynchronized' indicates that the CM has not initiated or completed the synchronization of the downstream physical layer 'phySynchronized' indicates that the CM has completed the synchronization of the downstream physical layer 'dsTopologyResolutionInProgress' indicates that the CM is attempting to determine its MD-DS-SG 'usParametersAcquired' indicates that the CM has completed the upstream parameters acquisition or have completed the downstream and upstream service groups resolution, wheater the CM is registering in a pre-3.0 or a 3.0 CMTS. 'rangingInProgress' indicates that the CM has initiated the ranging process. 'rangingComplete' indicates that the CM has completed initial ranging and received a Ranging Status of success from the CMTS in the RNG-RSP message. 'eaeInProgress' indicates that the CM has sent an Auth Info message for EAE. 'dhcpv4InProgress' indicates that the CM has sent a DHCPv4 DISCOVER to gain IP connectivity. 'dhcpv6InProgress' indicates that the CM has sent an DHCPv6 Solicit message. 'dhcpv4Complete' indicates that the CM has received a DHCPv4 ACK message from the CMTS. 'dhcpv6Complete' indicates that the CM has received a DHCPv6 Reply message from the CMTS. 'todEstablished' indicates that the CM has successfully acquired time of day. If the ToD is acquired after the CM is operational, this value should not be reported. 'securityEstablished' indicates that the CM has successfully completed the BPI initialization process. 'configFileDownloadComplete' indicates that the CM has completed the config file download process. 'registrationInProgress' indicates that the CM has sent a Registration Request (REG-REQ or REG-REQ-MP) 'registrationComplete' indicates that the CM has successfully completed the Registration process with the CMTS. 'accessDenied' indicates that the CM has received a registration aborted notification from the CMTS 'operational' indicates that the CM has completed all necessary initialization steps and is operational. 'bpiInit' indicates that the CM has started the BPI initialization process as indicated in the CM config file. If the CM already performed EAE, this state is skipped by the CM. 'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding. 'rfMuteAll' indicates that the CM is instructed to mute all channels in the CM-CTRL-REQ message from CMTS. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | other(1), notReady(2), notSynchronized(3), phySynchronized(4), dsTopologyResolutionInProgress(21), usParametersAcquired(5), rangingInProgress(22), rangingComplete(6), eaeInProgress(14), dhcpv4InProgress(15), dhcpv6InProgress(16), dhcpv4Complete(7), dhcpv6Complete(17), todEstablished(8), securityEstablished(9), configFileDownloadComplete(10), registrationInProgress(18), registrationComplete(11), accessDenied(13), operational(12), bpiInit(19), forwardingDisabled(20), rfMuteAll(23) | ||
| CmtsCmRegState | |||
| This data type defines the CM connectivity states as reported by the CMTS. The enumerated values associated with the CmtsCmRegState are: 'other' indicates any state not described below. 'initialRanging' indicates that the CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. 'rangingAutoAdjComplete' indicates that the CM has completed initial ranging and the CMTS sends a Ranging Status of success in the RNG-RSP. 'startEae' indicates that the CMTS has received an Auth Info message for EAE from the CM. 'startDhcpv4' indicates that the CMTS has received a DHCPv4 DISCOVER message from the CM. 'startDhcpv6' indicates that the CMTS has received a DHCPv6 Solicit message from the CM. 'dhcpv4Complete' indicates that the CMTS has sent a DHCPv4 ACK message to the CM. 'dhcpv6Complete' indicates that the CMTS has sent a DHCPv6 Reply message to the CM. 'startConfigFileDownload' indicates that the CM has started the config file download. If the TFTP Proxy feature is not enabled, the CMTS may not report this state. 'configFileDownloadComplete' indicates that the CM has completed the config file download process. If the TFTP Proxy feature is not enabled, the CMTS is not required to report this state. 'startRegistration' indicates that the CMTS has received a Registration Request (REG-REQ or REG-REQ-MP) from the CM. 'registrationComplete' indicates that the CMTS has received a Registration Acknowledge (REG-ACK) with a confirmation code of okay/success. 'operational' indicates that the CM has completed all necessary initialization steps and is operational. 'bpiInit' indicates that the CMTS has received an Auth Info or Auth Request message as part of BPI Initialization. 'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding. 'rfMuteAll' indicates that the CM is instructed to mute all channels in the CM-CTRL-REQ message from CMTS. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | other(1), initialRanging(2), rangingAutoAdjComplete(4), startEae(10), startDhcpv4(11), startDhcpv6(12), dhcpv4Complete(5), dhcpv6Complete(13), startConfigFileDownload(14), configFileDownloadComplete(15), startRegistration(16), registrationComplete(6), operational(8), bpiInit(9), forwardingDisabled(17), rfMuteAll(18) | ||
| ScdmaSelectionString | |||
| This data type represents the S-CDMA selection string for active codes used with Selectable Active Codes Mode 2. A 128-bit string indicating which codes are active. The first element in the string corresponds to code 0 (the all-ones code), and the last element in the string corresponds to code 127. A '1' element in the string indicates an active code, and a '0' indicates an unused code. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(16) | ||
| AmplitudeData | |||
| This data type represents a sequence of spectral amplitudes. Each spectral amplitude value corresponds to a bin. The format of the bin measurement is as follows. Sequence of: 4 bytes: ChCenterFreq The center frequency of the upstream channel. 4 bytes: FreqSpan The width in Hz of the band across which the spectral amplitudes characterizing the channel are measured. 4 bytes: NumberOfBins The number of data points or bins that compose the spectral data. The leftmost bin corresponds to the lower band edge, the rightmost bin corresponds to the upper band edge, and the middle bin center is aligned with the center frequency of the analysis span. 4 bytes: BinSpacing The frequency separation between adjacent bin centers. It is derived from the frequency span and the number of bins or data points. The bin spacing is computed as: BinSpacing = FrequencySpan/(NumberOfBins -1) The larger the number of bins the finer the resolution. 4 bytes: ResolutionBW The resolution bandwidth or equivalent noise bandwidth of each bin. If spectral windowing is used (based on vendor implementation), the bin spacing and resolution bandwidth would not generally be the same. n bytes: Amplitude (2 bytes * NumberOfBins) A sequence of two byte elements. Each element represents the spectral amplitudes in relation to the expected received signal power of a bin, in units of 0.01dB. That is, a test CMTS input signal with square-root raised-cosine spectrum, bandwidth equal to the expected received signal bandwidth, and power equal to the expected received signal power, which is present for the entire spectrum sampling period, will exhibit a spectrum measurement of 0 dB average power in each bin of the signal passband. Each bin element amplitude value format is 2's complement which provides a range of -327.68 dB to 327.67 dB amplitude value for the bin measurement. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(0 | 2..255) | ||
| Tlv8 | |||
| This data type represents a single TLV encoding. This first octet represents the Type of the TLV. The second octet represents an unsigned 8-bit Length of the subsequent Value part of the TLV. The remaining octets represent the value. The Value could be an atomic value or a sequence of one or more sub-TLVs. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(0 | 2..255) | ||
| ChId | |||
| This data type is an 8-bit number that represents a provisioned Downstream Channel ID (DCID) or a provisioned Upstream Channel ID (UCID). A Channel Id is unique per direction within a MAC Domain. The value zero is reserved for use when the channel ID is unknown. | |||
| TEXTUAL-CONVENTION | |||
| Unsigned32 | 0..255 | ||
| ChSetId | |||
| This data type is a CMTS-derived unique number within a MAC Domain used to reference a Channel Set within the CMTS. Values in the range of 1 to 255 define a single-channel Channel Set and correspond to either the Downstream Channel ID (DCID) or an Upstream Channel ID (UCID) of that channel. Values greater than 255 indicate a Channel Set consisting of two or more channels in the same direction within the MAC Domain. The value zero is reserved for use when the Channel Set is unknown. | |||
| TEXTUAL-CONVENTION | |||
| Unsigned32 | |||
| ChannelList | |||
| This data type represents a unique set of channel IDs in either the upstream or the downstream direction. Each octet represents a UCID or DCID depending on the direction of the channels within the list. The CMTS must ensure that this combination of channels is unique per direction within the MAC Domain. In order to facilitate Channel ID combinatorial uniqueness across all channel lists, a query to retrieve the value of an attribute of this type, returns the set of channels in the channel list in ascending order of Channel Ids. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(0..255) | ||
| AttributeMask | |||
| This data type consists of a sequence of 32-bit positions used to select the bonding group or the channel to which a service flow is assigned. DOCSIS defines three types of Attribute Masks for which this type applies: The Provisionied Attribute Mask that is configured to a Bonding Group or a single-channel, whereas the Required Attribute and the Forbidden Attribute Mask are part of the Service Flow QOS Parameter Set to be matched with the Provisioned Attribute Mask of CMTS-configured Bonding Groups or single-channels. DOCSIS reserves the assignment of the meaning of the first 8 bit positions (left to right) as follows: Bit 0: 'bonding' Bit 1: 'lowLatency' Bit 2: 'highAvailability' Bit positions 3-15 are reserved. Bit positions 16-31 are freely assigned by operators to represent their own constraints on the channel(s) selection for a particular service flow. | |||
| TEXTUAL-CONVENTION | |||
| BITS | bonding(0), lowLatency(1), highAvailability(2) | ||
| AttrAggrRuleMask | |||
| This data type represents a sequence of 32-bit positions that defines logical (e.g. AND, OR) operations to match against the channel list Provisioned Mask and Service Flow Required Mask bit positions when the CMTS is determining the service flow for assignment to a bonding group not configured by the management system. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(4) | ||
| RcpId | |||
| This data type defines a 'Receive Channel Profile Identifier' (RCP-ID). An RCP-ID consists of 5-octet length string where the first 3-bytes (from left to right corresponds to the Organizational Unique ID (OUI) followed by a two-byte vendor-maintained identifier to represent multiple versions or models of RCP-IDs. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(5) | ||
| Dsid | |||
| This data type defines the 20-bit Downstream Service Identifier (DSID) used by the CM for downstream resequencing, filtering, and forwarding. The value zero is reserved for use when the DSID is unknown or does not apply. | |||
| TEXTUAL-CONVENTION | |||
| Unsigned32 | 0..1048575 | ||
| RangingState | |||
| This data type defines the CM ranging state as reported by the CMTS. The enumerated values associated with the RangingState are: 'other' indicates any state not described below. 'aborted' indicates that the CMTS has sent a ranging abort. 'retriesExceeded' indicates that the CM ranging retry limit has exceeded. 'success' indicates that the CMTS has sent a ranging success in the ranging response. 'continue' indicates that the CMTS has sent a ranging continue in the ranging response. 'timeoutT4' indicates that the T4 timer expired on the CM. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | other(1), aborted(2), retriesExceeded(3), success(4), continue(5), timeoutT4(6) | ||
| IfDirection | |||
| Indicates a direction on an RF MAC interface. The value downstream(1) is from Cable Modem Termination System to Cable Modem. The value upstream(2) is from Cable Modem to Cable Modem Termination System. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | downstream(1), upstream(2) | ||
| DocsIf3CmStatusEntry | |||
| SEQUENCE | |||
| CmRegState as docsIf3CmStatusValue | |||
| OCTET STRING as docsIf3CmStatusCode | |||
| Counter32 as docsIf3CmStatusResets | |||
| Counter32 as docsIf3CmStatusLostSyncs | |||
| Counter32 as docsIf3CmStatusInvalidMaps | |||
| Counter32 as docsIf3CmStatusInvalidUcds | |||
| Counter32 as docsIf3CmStatusInvalidRangingRsps | |||
| Counter32 as docsIf3CmStatusInvalidRegRsps | |||
| Counter32 as docsIf3CmStatusT1Timeouts | |||
| Counter32 as docsIf3CmStatusT2Timeouts | |||
| Counter32 as docsIf3CmStatusUCCsSuccesses | |||
| Counter32 as docsIf3CmStatusUCCFails | |||
| DocsIf3CmStatusUsEntry | |||
| SEQUENCE | |||
| TenthdBmV as docsIf3CmStatusUsTxPower | |||
| Counter32 as docsIf3CmStatusUsT3Timeouts | |||
| Counter32 as docsIf3CmStatusUsT4Timeouts | |||
| Counter32 as docsIf3CmStatusUsRangingAborteds | |||
| DocsisUpstreamType as docsIf3CmStatusUsModulationType | |||
| DocsEqualizerData as docsIf3CmStatusUsEqData | |||
| Counter32 as docsIf3CmStatusUsT3Exceededs | |||
| TruthValue as docsIf3CmStatusUsIsMuted | |||
| RangingState as docsIf3CmStatusUsRangingStatus | |||
| DocsIf3CmtsCmRegStatusEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3CmtsCmRegStatusId | |||
| MacAddress as docsIf3CmtsCmRegStatusMacAddr | |||
| InetAddressIPv6 as docsIf3CmtsCmRegStatusIPv6Addr | |||
| InetAddressIPv6 as docsIf3CmtsCmRegStatusIPv6LinkLocal | |||
| InetAddressIPv4 as docsIf3CmtsCmRegStatusIPv4Addr | |||
| CmtsCmRegState as docsIf3CmtsCmRegStatusValue | |||
| InterfaceIndexOrZero as docsIf3CmtsCmRegStatusMdIfIndex | |||
| Unsigned32 as docsIf3CmtsCmRegStatusMdCmSgId | |||
| RcpId as docsIf3CmtsCmRegStatusRcpId | |||
| Unsigned32 as docsIf3CmtsCmRegStatusRccStatusId | |||
| ChSetId as docsIf3CmtsCmRegStatusRcsId | |||
| ChSetId as docsIf3CmtsCmRegStatusTcsId | |||
| DocsisQosVersion as docsIf3CmtsCmRegStatusQosVersion | |||
| DateAndTime as docsIf3CmtsCmRegStatusLastRegTime | |||
| Counter32 as docsIf3CmtsCmRegStatusAddrResolutionReqs | |||
| DocsIf3CmtsCmUsStatusEntry | |||
| SEQUENCE | |||
| InterfaceIndex as docsIf3CmtsCmUsStatusChIfIndex | |||
| DocsisUpstreamType as docsIf3CmtsCmUsStatusModulationType | |||
| TenthdBmV as docsIf3CmtsCmUsStatusRxPower | |||
| TenthdB as docsIf3CmtsCmUsStatusSignalNoise | |||
| Unsigned32 as docsIf3CmtsCmUsStatusMicroreflections | |||
| DocsEqualizerData as docsIf3CmtsCmUsStatusEqData | |||
| Counter32 as docsIf3CmtsCmUsStatusUnerroreds | |||
| Counter32 as docsIf3CmtsCmUsStatusCorrecteds | |||
| Counter32 as docsIf3CmtsCmUsStatusUncorrectables | |||
| Integer32 as docsIf3CmtsCmUsStatusHighResolutionTimingOffset | |||
| TruthValue as docsIf3CmtsCmUsStatusIsMuted | |||
| RangingState as docsIf3CmtsCmUsStatusRangingStatus | |||
| DocsIf3MdChCfgEntry | |||
| SEQUENCE | |||
| InterfaceIndex as docsIf3MdChCfgChIfIndex | |||
| TruthValue as docsIf3MdChCfgIsPriCapableDs | |||
| ChId as docsIf3MdChCfgChId | |||
| AttributeMask as docsIf3MdChCfgSfProvAttrMask | |||
| RowStatus as docsIf3MdChCfgRowStatus | |||
| DocsIf3RccCfgEntry | |||
| SEQUENCE | |||
| RcpId as docsIf3RccCfgRcpId | |||
| Unsigned32 as docsIf3RccCfgRccCfgId | |||
| OCTET STRING as docsIf3RccCfgVendorSpecific | |||
| SnmpAdminString as docsIf3RccCfgDescription | |||
| RowStatus as docsIf3RccCfgRowStatus | |||
| DocsIf3RccStatusEntry | |||
| SEQUENCE | |||
| RcpId as docsIf3RccStatusRcpId | |||
| Unsigned32 as docsIf3RccStatusRccStatusId | |||
| Unsigned32 as docsIf3RccStatusRccCfgId | |||
| INTEGER as docsIf3RccStatusValidityCode | |||
| SnmpAdminString as docsIf3RccStatusValidityCodeText | |||
| DocsIf3RxChCfgEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3RxChCfgRcId | |||
| InterfaceIndex as docsIf3RxChCfgChIfIndex | |||
| TruthValue as docsIf3RxChCfgPrimaryDsIndicator | |||
| Unsigned32 as docsIf3RxChCfgRcRmConnectivityId | |||
| RowStatus as docsIf3RxChCfgRowStatus | |||
| DocsIf3RxChStatusEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3RxChStatusRcId | |||
| InterfaceIndex as docsIf3RxChStatusChIfIndex | |||
| TruthValue as docsIf3RxChStatusPrimaryDsIndicator | |||
| Unsigned32 as docsIf3RxChStatusRcRmConnectivityId | |||
| DocsIf3RxModuleCfgEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3RxModuleCfgRmId | |||
| Unsigned32 as docsIf3RxModuleCfgRmRmConnectivityId | |||
| Unsigned32 as docsIf3RxModuleCfgFirstCenterFrequency | |||
| RowStatus as docsIf3RxModuleCfgRowStatus | |||
| DocsIf3RxModuleStatusEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3RxModuleStatusRmId | |||
| Unsigned32 as docsIf3RxModuleStatusRmRmConnectivityId | |||
| Unsigned32 as docsIf3RxModuleStatusFirstCenterFrequency | |||
| DocsIf3MdNodeStatusEntry | |||
| SEQUENCE | |||
| NodeName as docsIf3MdNodeStatusNodeName | |||
| Unsigned32 as docsIf3MdNodeStatusMdCmSgId | |||
| Unsigned32 as docsIf3MdNodeStatusMdDsSgId | |||
| Unsigned32 as docsIf3MdNodeStatusMdUsSgId | |||
| DocsIf3MdDsSgStatusEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3MdDsSgStatusMdDsSgId | |||
| ChSetId as docsIf3MdDsSgStatusChSetId | |||
| DocsIf3MdUsSgStatusEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3MdUsSgStatusMdUsSgId | |||
| ChSetId as docsIf3MdUsSgStatusChSetId | |||
| DocsIf3MdUsToDsChMappingEntry | |||
| SEQUENCE | |||
| InterfaceIndex as docsIf3MdUsToDsChMappingUsIfIndex | |||
| InterfaceIndex as docsIf3MdUsToDsChMappingDsIfIndex | |||
| InterfaceIndex as docsIf3MdUsToDsChMappingMdIfIndex | |||
| DocsIf3MdCfgEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3MdCfgMddInterval | |||
| INTEGER as docsIf3MdCfgIpProvMode | |||
| TruthValue as docsIf3MdCfgCmStatusEvCtlEnabled | |||
| INTEGER as docsIf3MdCfgUsFreqRange | |||
| TruthValue as docsIf3MdCfgMcastDsidFwdEnabled | |||
| TruthValue as docsIf3MdCfgMultRxChModeEnabled | |||
| TruthValue as docsIf3MdCfgMultTxChModeEnabled | |||
| INTEGER as docsIf3MdCfgEarlyAuthEncrCtrl | |||
| TruthValue as docsIf3MdCfgTftpProxyEnabled | |||
| TruthValue as docsIf3MdCfgSrcAddrVerifEnabled | |||
| INTEGER as docsIf3MdCfgDownChannelAnnex | |||
| TruthValue as docsIf3MdCfgCmUdcEnabled | |||
| TruthValue as docsIf3MdCfgSendUdcRulesEnabled | |||
| SnmpTagList as docsIf3MdCfgServiceTypeIdList | |||
| DocsIf3BondingGrpCfgEntry | |||
| SEQUENCE | |||
| IfDirection as docsIf3BondingGrpCfgDir | |||
| Unsigned32 as docsIf3BondingGrpCfgCfgId | |||
| ChannelList as docsIf3BondingGrpCfgChList | |||
| AttributeMask as docsIf3BondingGrpCfgSfProvAttrMask | |||
| Unsigned32 as docsIf3BondingGrpCfgDsidReseqWaitTime | |||
| Unsigned32 as docsIf3BondingGrpCfgDsidReseqWarnThrshld | |||
| RowStatus as docsIf3BondingGrpCfgRowStatus | |||
| DocsIf3DsBondingGrpStatusEntry | |||
| SEQUENCE | |||
| ChSetId as docsIf3DsBondingGrpStatusChSetId | |||
| Unsigned32 as docsIf3DsBondingGrpStatusMdDsSgId | |||
| Unsigned32 as docsIf3DsBondingGrpStatusCfgId | |||
| DocsIf3UsBondingGrpStatusEntry | |||
| SEQUENCE | |||
| ChSetId as docsIf3UsBondingGrpStatusChSetId | |||
| Unsigned32 as docsIf3UsBondingGrpStatusMdUsSgId | |||
| Unsigned32 as docsIf3UsBondingGrpStatusCfgId | |||
| DocsIf3UsChExtEntry | |||
| SEQUENCE | |||
| INTEGER as docsIf3UsChExtSacCodeHoppingSelectionMode | |||
| ScdmaSelectionString as docsIf3UsChExtScdmaSelectionStringActiveCodes | |||
| DocsIf3UsChSetEntry | |||
| SEQUENCE | |||
| ChSetId as docsIf3UsChSetId | |||
| ChannelList as docsIf3UsChSetChList | |||
| DocsIf3DsChSetEntry | |||
| SEQUENCE | |||
| ChSetId as docsIf3DsChSetId | |||
| ChannelList as docsIf3DsChSetChList | |||
| DocsIf3SignalQualityExtEntry | |||
| SEQUENCE | |||
| TenthdB as docsIf3SignalQualityExtRxMER | |||
| Unsigned32 as docsIf3SignalQualityExtRxMerSamples | |||
| DocsIf3CmtsSignalQualityExtEntry | |||
| SEQUENCE | |||
| TenthdB as docsIf3CmtsSignalQualityExtCNIR | |||
| TenthdBmV as docsIf3CmtsSignalQualityExtExpectedRxSignalPower | |||
| DocsIf3CmtsSpectrumAnalysisMeasEntry | |||
| SEQUENCE | |||
| AmplitudeData as docsIf3CmtsSpectrumAnalysisMeasAmplitudeData | |||
| Unsigned32 as docsIf3CmtsSpectrumAnalysisMeasTimeInterval | |||
| RowStatus as docsIf3CmtsSpectrumAnalysisMeasRowStatus | |||
| DocsIf3CmDpvStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3CmDpvStatsGrpId | |||
| Unsigned32 as docsIf3CmDpvStatsLastMeasLatency | |||
| DateAndTime as docsIf3CmDpvStatsLastMeasTime | |||
| Unsigned32 as docsIf3CmDpvStatsMinLatency | |||
| Unsigned32 as docsIf3CmDpvStatsMaxLatency | |||
| Unsigned32 as docsIf3CmDpvStatsAvgLatency | |||
| Unsigned32 as docsIf3CmDpvStatsNumMeas | |||
| DateAndTime as docsIf3CmDpvStatsLastClearTime | |||
| DocsIf3CmEventCtrlEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3CmEventCtrlEventId | |||
| RowStatus as docsIf3CmEventCtrlStatus | |||
| DocsIf3CmtsEventCtrlEntry | |||
| SEQUENCE | |||
| Unsigned32 as docsIf3CmtsEventCtrlEventId | |||
| RowStatus as docsIf3CmtsEventCtrlStatus | |||